RAM Commander Reliability and Safety Software 30 YEARS OF SYSTEM SAFETY LEADERSHIP RAM Commander Reliability and Safety Software

RAM Commander - ALD Commander by ALD is far more than just a ... RAM Commander Software supports the following ... [email protected] FTA Tutorial for project TUTORIAL

  • Upload
    vukiet

  • View
    242

  • Download
    0

Embed Size (px)

Citation preview

Page 1: RAM Commander - ALD Commander by ALD is far more than just a ... RAM Commander Software supports the following ... support@ald.co.il FTA Tutorial for project TUTORIAL

RAM CommanderReliability and Safety Software30 YEARS OF SYSTEM SAFETY LEADERSHIP

RAM CommanderReliability and Safety Software

Page 2: RAM Commander - ALD Commander by ALD is far more than just a ... RAM Commander Software supports the following ... support@ald.co.il FTA Tutorial for project TUTORIAL

RAM CommanderReliability and Safety Software30 YEARS OF SYSTEM SAFETY LEADERSHIP

RAM Commander by ALD is far more than just a Reliability & Safety Software – it is a comprehensive RAMS toolkit covering all tasks required from reliability and safety engineers as well as designers’ need for a quick MTBF Evaluation, Availability Calculation, Maintainability, Safety and Risk Analysis.

The Most advanced RAMS Toolkit in the Market!

All RAMS Analysis in One Package: MTBF calculationRBDFMECAFTAMARKOVETAFHASSARCM / MSG-3

Page 3: RAM Commander - ALD Commander by ALD is far more than just a ... RAM Commander Software supports the following ... support@ald.co.il FTA Tutorial for project TUTORIAL

30 YEARS OF SYSTEM SAFETY LEADERSHIP

The main block of RAM Commander is the Bill of Material, which can be either imported from external applications or built manually in RAM Commander. The Product Tree (BOM) forms the basis for the rest of the RAM Commander RAMS modules which are interdependent and can be accessed by a one-click switch; from Reliability Prediction to FMECA and Testability, RBD, FTA, etc. RAM Commander is a modular application - modules may be used and purchased separately, or as an integrated RAMS toolkit.RAM Commander Software supports the following Reliability Prediction methods:

Electronic Components Reliability Prediction Methods:

MIL-HDBK-217 (All versions), RADC-TR-85-91, Reliability Toolkit (1995), 217Plus, ALCATEL, BELLCORE Issue 5,6, BRITISH TELECOM HRD4, HRD5, CNET RDF93 rev. 02/95, IEC 62380, UTE C 80-810, FIDES Guide 2004, 2009, ITALTEL IRPH93, Telcordia SR-332 Issue 1, 2 & 3, Siemens SN 29500, GJB 299C, Stress/Strength Analysis, GPRD (for user defined failure rates).

Mechanical Components Reliability Prediction Methods:

NSWC-98/LE1 Mechanics, NPRD-95, NPRD 2011,Stress/Strength Analysis, GPRD.

RAM Commander Component Libraries:

Easy to use built-in libraries containing over 400,000 widely used components by world leading manufactures, include powerful decoding mechanism, user-defined libraries and enhanced search features.

45.3841.70

3.52---

Capacitor

Antenna

Switch

IC-Digital

Motor

3.312.85

2.38

Pareto analysis (by item code)

Graph Generator for RAM Commander

RAM CommanderReliability and Safety Software

Importable Product Tree (BOM)

Page 4: RAM Commander - ALD Commander by ALD is far more than just a ... RAM Commander Software supports the following ... support@ald.co.il FTA Tutorial for project TUTORIAL

RAM CommanderReliability and Safety Software30 YEARS OF SYSTEM SAFETY LEADERSHIP

GPRD - Generalized Part Reliability Data - General Part Data Weibull

A useful general distribution for describing failure time data of mechanical or electro-mechanical equipment with aging, resulting in a Shape parameter (Beta) and a Scale parameter (Teta).

RBD - Reliability Block Diagrams with Monte Carlo Simulation

Calculation of functional Reliability and Availability analysis of systems with various reliability distributions including all types of redundancy and repair factors.

Markov Chains

A powerful tool for analyzing the evolution, performance and reliability of physical systems, calculation of steady-state mode, time-dependency mode, availability, unavailability, failure & repair rate & frequency, MTBF, MTTF, MTTR, reliability/unreliability and other system parameters.

RBD STANDARD for Project TUTORIAL Drive C:

State1 - A ok, B ok,Init.prob.=1,Performance=20

State2 - A failed, B ok, Init.prob.=0, Performance=10

State4 - A and B failed, Init.prob.=0, Performance=0

Unit A Repair, Rate=0.01

Unit A Failure Rate, Rate=0.0001

Unit B Failure Rate, Rate=0.0002

Unit A Failure Rate, Rate=0.0001

Unit B Repair Rate, Rate=0.02

B Failure Rate, Rate=0.0002

State4 - A ok, B failed, Init.prob.=0, Performance=10

Markov Diagram Example

Page 5: RAM Commander - ALD Commander by ALD is far more than just a ... RAM Commander Software supports the following ... support@ald.co.il FTA Tutorial for project TUTORIAL

RAM CommanderReliability and Safety Software30 YEARS OF SYSTEM SAFETY LEADERSHIP

Derating

Provides a tool for defining derating guidelines to analyze the overstressed components under current temperature conditions.

Maintainability Prediction

Used to predict maintainability of systems and equipment of any type at any level of maintenance.

MSG-3

Including System, Zonal and Structural Analysis. Used by aircraft manufactures & aircraft operators to perform aircraft scheduled maintenance development analysis according to ATA MSG-3 procedure.

RCM

Utilizes a systematic approach to understand how equipment fails and what maintenance tasks can be done to minimize failures, maximize reliability, understand why certain maintenance tasks are performed and eliminate unnecessary preventive maintenance activities.

FMECA

Serves for automated failure mode, effects and criticality analysis, both hardware and functional approaches fully complys with MIL-STD-1629 and GMP. Integration of Testability features for in-depth testability analysis.

Page 6: RAM Commander - ALD Commander by ALD is far more than just a ... RAM Commander Software supports the following ... support@ald.co.il FTA Tutorial for project TUTORIAL

RAM CommanderReliability and Safety Software30 YEARS OF SYSTEM SAFETY LEADERSHIP

RAM CommanderReliability and Safety Software30 YEARS OF SYSTEM SAFETY LEADERSHIP

RAM CommanderReliability and Safety Software

Process & Design FMEA

Performs P&D potential failure mode and effects analysis based on MIL-STD-1629.

FTA

A widely used method in system reliability and failure probability analysis, used to determine various combinations of hardware, software and human error failures that could result in specified risk or system failure.Includs FT+, CAFTA and Aralia SIMtree import.

Safety Toolkit

Implements safety tasks defined by the various safety assessment standards/ recommendations according to SAEARP4754 A, ARP 4761, MIL-STD-882, FAR25-1309b.

WWW.ALDSERVICE.COMALD Software Ltd.contact us at: [email protected]

FTA Tutorial for project TUTORIAL on Drive C:

2.32e-006

1.47e-006 1.83e-006

7.32e-00711.3e-0079.83e-0072.7e-0079.83e-007

RepairableFR=8.35

MTTR=0.117667

RepairableFR=6.6583

MTTR=0.0333333

Probabilityq=0.01

RepairableFR=2.94567

MTTR=0.127333

RepairableFR=0.751307MTTR=0.354

RepairableFR=3.996

MTTR=0.0946667

RepairableFR=0.288

MTTR=0.0946667

RepairableFR=3.4

MTTR=0.0333333

RepairableFR=8.35

MTTR=0.117667

RepairableFR=3.44531

MTTR=0.0946667

2.22e-007

4.06e-007

3.78e-007

3.26e-007

3.73e-0073.75e-007

3.75e-0092.665e-007

00.1

sample Fault Tree for project TUTORIAL - according to project’s

Product Tree and FMCA

FTA Tutorial for project TUTORIAL on Drive C:

OR

OR OR

OR

ORAND

Communicationfailure

Receiver /Transmitter

PSPower SupplyAntenna failure

CommunicationSystem general

failure

PSPower Supply

Control failure

HardDriveTotal drive fail

Mother Board - CPU Fail

Mother Board - Memory Fail

System BlockFailure

MotherBoard

KeyboardTotal keyboard fail

OR

Receiver failureTransmitter

failure2

Transmitter failure

Alternativetransmitter failure

Partial List of ALD Customers: