RAUGEO GROUND-SOURCE SYSTEMS - Rehau · raugeo ground-source systems innovative heating & cooling solutions parts list 827300/12 en. 2 ... 131703-150 150 32 x 2,9 169 323

Building SolutionsAutomotive

Industry

www.rehau.co.uk/groundsourceValid from 01.04.2014Subject to Technical Alterations

RAUGEO GROUND-SOURCE SYSTEMSINNOVATIVE HEATING & COOLING SOLUTIONS PARTS LIST 827300/12 EN

2

CONTENTS

1 � � � � � Ground-source Probes and Accessories � � � � � � � � � � 3

2 � � � � � Ground-source Collectors and Accessories � � � � � � � � 11

3 � � � � � Energy Piles and Accessories � � � � � � � � � � � � � � � 13

4 � � � � � RAUGEO Helix

and Accessories � � � � � � � � � � � � � � 17

5 � � � � � RAUGEO Small Manifold Chamber � � � � � � � � � � � � 18

6 � � � � � RAUGEO Medium Manifold Chambers� � � � � � � � � � � 21

7 � � � � � RAUGEO Large Manifold Chambers � � � � � � � � � � � � 22

8 � � � � � RAUGEO CLICK Manifold� � � � � � � � � � � � � � � � � � 30

9 � � � � � RAUGEO Accessories � � � � � � � � � � � � � � � � � � � 36

10� � � � � RAUGEO Compression Sleeve Technology � � � � � � � � 42

11� � � � � Jointing Technique Electrofusion Coupler� � � � � � � � � 47

3

1 GROUND-SOURCE PROBES & ACCESSORIES

RAUGEO PE-Xa ProbeDouble-U-ProbeMade of cross-linked polyethylene (RAU-PE-Xa) according toDIN 16892/93, UV-stabilised, natural colour, with a grey protectivelayer of RAU-PE.- High resistance against notches, grooves and point loads- Curved probe tip, therefore no joint in the ground- Additional protection of probe tip with GRP casing- Factory tested with certification- 10 year consequential loss warrantyOperating temperature: -40 °C to +95 °CDelivery form: 1 Double-U-probe/pallet (4 coils)Includes screws for connecting the probe feet of double-u probe RAUGEO PE-Xa Probe 32 x 2,9Probe tip diameter: 110 mm Art�-No� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

131693-050* 50 32 x 2,9 58 108

135873-060 60 32 x 2,9 70 129

135503-070 70 32 x 2,9 80 151

135513-080 80 32 x 2,9 91 173

135523-090 90 32 x 2,9 102 194

135533-100 100 32 x 2,9 114 216

135404-110 110 32 x 2,9 125 237

100741-120 120 32 x 2,9 136 259

135553-125 125 32 x 2,9 141 270

140138-130 130 32 x 2,9 147 280

135685-140 140 32 x 2,9 158 302

131703-150 150 32 x 2,9 169 323

* Produced to order

RAUGEO PE-Xa Probe 40 x 3,7Probe tip diameter: 134 mm Art�-No� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

140143-050* 50 40 x 3,7 88 167

140153-060* 60 40 x 3,7 105 200

140163-070* 70 40 x 3,7 122 234

140173-080* 80 40 x 3,7 139 267

140183-090* 90 40 x 3,7 155 300

140193-100* 100 40 x 3,7 172 334

140203-110* 110 40 x 3,7 189 367

140223-125* 125 40 x 3,7 215 417

140753-130* 130 40 x 3,7 215 434

140233-150* 150 40 x 3,7 257 501

140243-175* 175 40 x 3,7 300 584

140253-200* 200 40 x 3,7 343 668

140263-225* 225 40 x 3,7 386 751

140273-250* 250 40 x 3,7 429 835

* Produced to order

4

RAUGEO PE-RC Probes DUODouble-U loop probe made from PE100-RC to DIN 8074/75. TÜV certification according to PAS 1075. UV stabilised, colour - black(RAL 9004)- factory tested with certification, - welded according to DVS guidelines. - Produced according to SKZ HR 3.26 probe standard.Operating temperatures: -20oC to +40oCMax. operating pressure 16 bar (safety factor 1.25)Delivery form: Double-U probe on a pallet (4 coils)Includes screws for connecting the probe feet of double-u probe

RAUGEO PE-RC Probes DUO 32Duo probe, pipe dimension 32 x 3,0Probe tip diameter: 96 mm Art�-No� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

131296-050 50 32 x 3,0 55 107

131306-060 60 32 x 3,0 66 129

131316-070 70 32 x 3,0 77 151

131326-080 80 32 x 3,0 88 173

131336-090 90 32 x 3,0 99 194

131346-100 100 32 x 3,0 110 216

131356-110 110 32 x 3,0 121 237

131606-120 120 32 x 3,0 132 258

131376-125 125 32 x 3,0 138 270

131386-130 130 32 x 3,0 143 280

131396-140 140 32 x 3,0 154 302

131406-150 150 32 x 3,0 165 323

RAUGEO PE-RC Probes DUO 40Duo probe, pipe dimension 40 x 3,7Probe tip diameter: 118 mm Art�-No� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

131446-060 60 40 x 3,7 104 200

131456-070 70 40 x 3,7 121 234

131466-080 80 40 x 3,7 138 267

131476-090 90 40 x 3,7 155 300

131486-102 102 40 x 3,7 176 341

131496-127 127 40 x 3,7 219 424

131506-140 140 40 x 3,7 242 467

131516-152 152 40 x 3,7 262 507

131526-165 165 40 x 3,7 285 551

131536-175 175 40 x 3,7 302 584

131546-185 185 40 x 3,7 319 618

131556-200 200 40 x 3,7 345 668

131566-225 225 40 x 3,7 388 751

131576-250 250 40 x 3,7 431 835

131586-275 275 40 x 3,7 474 918

131596-300 300 40 x 3,7 517 1.001

5

RAUGEO PE 100 DUO Probe Made of high density polyethylene (PE 100) according to DIN 8074/75,UV-stabilised, black colour (RAL 9004), - factory tested with certification - SKZ certification HR 3.26 - welded according to DVS guidelines - compact and robust probe tipe

Operating temperature: -20 °C bis +40 °CMax. operating pressure: 16 bar (C = 1.25)Delivery form: 1 DUO-probe/palette (4 coils)includes screwes for connecting the prope feet of double-u probe

RAUGEO PE 100 DUO Probe 32Duo probe, pipe dimension 32 x 3,0Probe tip diameter: 96 mm Art�-No� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

136146-050* 50 32 x 3,0 55 107

136156-060 60 32 x 3,0 66 129

136166-070 70 32 x 3,0 77 151

136176-080 80 32 x 3,0 88 173

136186-090 90 32 x 3,0 99 194

136196-100 100 32 x 3,0 110 216

136206-110 110 32 x 3,0 121 237

136856-120* 120 32 x 3,0 132 258

136226-125 125 32 x 3,0 138 270

136236-130* 130 32 x 3,0 143 280

136246-140* 140 32 x 3,0 154 302

136256-150* 150 32 x 3,0 165 323

* Produced to order

RAUGEO PE 100 DUO Probe 40Duo probe, pipe dimension 40 x 3,7Probe tip diameter: 118 mm Art�-No� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

136296-060* 60 40 x 3,7 104 200

136306-070* 70 40 x 3,7 121 234

136316-080* 80 40 x 3,7 138 267

136326-090* 90 40 x 3,7 155 300

136336-102 102 40 x 3,7 176 341

136346-127* 127 40 x 3,7 219 424

136356-140* 140 40 x 3,7 242 467

136366-152* 152 40 x 3,7 262 507

136376-165* 165 40 x 3,7 285 551

136386-175* 175 40 x 3,7 302 584

136396-185* 185 40 x 3,7 319 618

136406-200* 200 40 x 3,7 345 668

136416-225* 225 40 x 3,7 388 751

136426-250* 250 40 x 3,7 431 835

136436-275* 275 40 x 3,7 474 918

136446-300* 300 40 x 3,7 517 1002

* Produced to order

6

RAUGEO Backfilling Pipe PE SDR 11For grouting of the borehole.Made of SDR 11 polythyleneUV stabilised, Colour: black2m additional pipe versus probe length.

Please note: For short term over pressure loading, the backfillingpipe can only be used for one borehole. RAUGEO Backfilling Pipe 25 x 2,3 Art�-No� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

136387-052 52 25 x 2,3 8 17

136387-062 62 25 x 2,3 10 20

136387-072 72 25 x 2,3 12 24

136387-082 82 25 x 2,3 13 27

136387-092 92 25 x 2,3 15 30

136387-104 104 25 x 2,3 16 34

136387-112 112 25 x 2,3 18 37

136387-129 129 25 x 2,3 20 42

136387-134 134 25 x 2,3 22 44

136387-142 142 25 x 2,3 23 46

136387-154 154 25 x 2,3 24 50

136387-167 167 25 x 2,3 27 55

136387-177 177 25 x 2,3 28 58

136387-187 187 25 x 2,3 30 61

136387-202 202 25 x 2,3 32 66

136387-227 227 25 x 2,3 36 74

136387-252 252 25 x 2,3 40 82

136387-277 277 25 x 2,3 44 91

136387-302 302 25 x 2,3 48 99

RAUGEO Backfilling Pipe 32 x 2,9 Art�-No� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

136399-052 52 32 x 2,9 15 28

136399-062 62 32 x 2,9 17 33

136399-072 72 32 x 2,9 20 39

136399-082 82 32 x 2,9 23 44

136399-092 92 32 x 2,9 26 50

136399-104 104 32 x 2,9 29 56

136399-112 112 32 x 2,9 32 60

136399-124 124 32 x 2,9 35 67

136399-129 129 32 x 2,9 36 69

136399-132 132 32 x 2,9 37 71

136399-142 142 32 x 2,9 40 76

136399-154 154 32 x 2,9 43 83

136399-202 202 32 x 2,9 57 108

136399-227 227 32 x 2,9 64 122

136399-252 252 32 x 2,9 71 136

136399-302 302 32 x 2,9 85 163

7

Weight for RAUGEO Probes For simple insertion of the probe into the borehole- For a PE Duo probe, use weight connection set 1- For a PE Uno probe, use weight connection set 2- For a PE-Xa probe, use PE-Xa adapter set- Connection of different probe weights with a weight extension setMaterial: Steel Art�-No� Length d Weight Delivery Unit

[mm] [mm] [kg] [pc]

352400-002 approx. 360 75 12,5 1

352410-002 approx. 720 75 25 1

Insertion Aid for RAUGEO PE 100 Probes Used as a support rod for inserting probes into a boreholeAdd the insertion aid to the DUO probe with weight connector set 1Material: Steel Art�-No Length Weight Delivery Unit

[mm] [kg] [pc]

352420-001 approx. 900 0,75 1

Weight Connector Set 1 for RAUGEO PE DUO ProbesFor the installation of a probe weight (or insertion aid between theprobe pipes) to a PE Duo probe.Material: Steel Art�-No� Application Weight Delivery Unit

[kg] [pc]

352430-002 Probe weight or insertion aid 0,2 1

351917-002 Short variant only for probe weights 0,2 1

Weight Connector Set 2 for RAUGEO PE UNO Probes For the installation of a probe weight to PE Uno probe.Material: Steel Art�-No� Weight Delivery Unit

[kg] [pc]

352440-001 0,3 1

8

Weight Adapter Set for RAUGEO PE-Xa ProbesFor the installation of a probe weight to a PE-Xa probe.Material: Steel

Art�-Nr� Weight Delivery Unit

[kg] [pc]

351597-002 0,4 1

Weight Extension Set for RAUGEO PE Probe Weights For the modular connection of different probe weights.Material: Steel Art�-Nr� Weight Delivery Unit

[kg] [pc]

352450-001 0,1 1

RAUGEO Y-PipeFor connection of both flow and return pipes at the borehole. The Y-pipe is made of PE 100 SDR 11 according to DIN 8075.To be connected using electrofusion welding. Art�-Nr� Dimension Length Delivery Unit

[mm] [mm] [pc]

350499-001 32-32-40 190 2

350509-001 40-40-50 210 2

RAUGEO Y-Pipe with SocketsFor connection of both flow and return pipes at the borehole. The Y-pipe is made of PE 100 SDR 11 according to DIN 8075.To be connected using socket welding.

Art�-Nr� Dimension Length Delivery Unit

[mm] [mm] [pc]

135433-001 32-32-40 240 2

135443-001 40-40-50 270 2

9

RAUGEO SpacerTo ensure a defined space between the probe pipes and also allow space for the backfillig pipe. This prevents the pipes being in direct contact with one another and therefore causing heat transmission..

Art�-Nr� d x s OD with pipe Middle Opening Delivery Unit

[mm] [mm] [mm] [pc]

222859-001 32 x 2,9 117 45 10

228429-001 40 x 3,7 134 50 10

RAUGEO Fill backfilling materialPre-mixed backfilling material for grouting vertical borehole installations. Frost resistance in accordance with DIN 52104-A.RAUGEO Fill red: Thermal conductivity approx. 2,0 W/mK, Suspension density 1,65 kg/dm3, Compression resistance 28 d ca. 5,5 N/mm2, Water permeabili-ty- < 2 x 10-10 m/sRAUGEO Fill blue: Thermal conductivity ca. 1,2 W/mK, Suspension density 1,43 kg/dm3, Compression resistance 28 d ca. 4 N/mm2, Water permeability < 1 x 10-9 m/sRAUGEO Fill white: Thermal conductivity ca. 1,0 W/mK, Suspension density 1,47-1,73 kg/dm³ depending on water and adhesive content 1 x 10-12 m/s, Compression resistance 28 d ca. 4 N/mm2

Delivery form: 40 bags of 25 kg per pallet. Art�-Nr� Type Thermal Cond�- Application Spreading rate Weight Delivery Unit

[W/mK] [to/m3] [kg/pallet]

302509-001* RAUGEO fill red 2,0 High thermal conductivity 1,03 1.000 Pallet

+ frost resistant

302509-002* RAUGEO fill red 2,0 High thermal conductivity 1,03 1.000 Big Bag

+ frost resistant

302509-003* RAUGEO fill red 2,0 High thermal conductivity 1,03 - Siloware

+ frost resistance

302519-001* RAUGEO fill blue 1,2 frost resistant 0,68 1000 Pallet

302519-002* RAUGEO fill blue 1,2 frost resistant 0,68 1000 Big Bag

302519-003* RAUGEO fill blue 1,2 frost resistant 0,68 - Siloware

303439-001* RAUGEO fill white 1,0 basic 0,80 1000 Pallet

303439-002* RAUGEO fill white 1,0 basic 0,80 1000 Big Bag

303439-003* RAUGEO fill white 1,0 basic 0,80 - Siloware

* Delivery time on request

10

2 GROUND-SOURCE COLLECTORS AND ACCESSORIES

RAUGEO collect PE-Xa SDR 11Made of cross-linked polythylene (RAU-PE-Xa) according to DIN 16892/93, UV-stabilised, natural colour, with a grey protective layer of RAU-PE - Resistant to notches and grooves - Does not require sand bed for installation

Operating temperature: -40 °C to +95 °C

Art�-Nr� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

135233-001 100 20 x 1,9 12 21

135243-001 100 25 x 2,3 18 33

135253-001 100 32 x 2,9 28 54

135763-001 100 40 x 3,7 42 83

RAUGEO collect PE-Xa plus SDR 11With the same properties of RAUGEO collect PE-Xa.Additional oxygen barrier according to DIN 4726.Operating temperature: -40 °C to +95 ° Art�-Nr� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

135667-100 1 100 20 x 1,9 14 21

135697-001 1 100 25 x 2,3 19 33

135687-001 1 100 32 x 2,9 31 54

135677-001 1 100 40 x 3,7 47 831 Produced to order

RAUGEO collect PE-RC SDR 11Made of polyethylene resistant to crack (PE 100-RC) according to PAS 1075, UV-stabilised, Colour black, SDR 11Operating temperature: -20 °C to +40 °C Art�-Nr� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

136825-100 100 25 x 2,3 18 33

136495-100 100 32 x 3,0 28 54

136505-100 100 40 x 3,7 42 83

11

RAUGEO collect PE 100 SDR 11Made of PE-HD according to DIN 8074/75, UV stabilised, colour black.Please note: PE non-crosslinked pipes must be installed in a sandbed�Operating temperature: -20 °C to +40 °


[m] [mm] [kg] [l]

137318-100* 100 25 x 2,3 18 33

135495-100* 100 32 x 3,0 28 54

135695-100* 100 40 x 3,7 42 83


RAUGEO collect Laying AidsTo fix the collector pipe in the pipe trench or foundation pit.The laying aid can then be pulled out and reused. Art�-Nr� Length d Delivery Unit

[mm] [mm] [pc]

222869-001 200 10 25

12

3 ENERGY PILES AND ACCESSORIES

Helix XXL PE-XaSpiral collector for installation in foundation piles made from high pressure crosslinked polyethylene (RAU-PE-Xa) to DIN 16892/93, neutral colour, with separately connected return pipe - Resistant to nicks and stress cracking - Continuous flow and return pipe without jointing technique - Optimised pipe bend in the pile base

Helix XXL 20 x 1,9 Art�-Nr� d x s Pile Length Pipe Length Weight OD Pipe Coil Return Length

[mm] [m] [m] [kg/m] [m] [m]

113539-001 20 x 1,9 10 65 8 0,50 13

114551-001 20 x 1,9 15 95 11 0,50 18

114500-001 20 x 1,9 10 75 9 0,54 13

114501-001 20 x 1,9 15 110 13 0,55 18

114502-001 20 x 1,9 10 80 9 0,60 13

114503-001 20 x 1,9 15 120 14 0,60 18

114504-001 20 x 1,9 10 90 11 0,70 13

114505-001 20 x 1,9 15 140 16 0,70 18

114506-001 20 x 1,9 10 115 13 0,79 13

114507-001 20 x 1,9 15 170 20 0,79 18

Helix XXL 25 x 2,3 Art�-Nr� d x s Pfahllänge Rohrlänge Weight AD Rohrbund Länge Rücklauf

[mm] [m] [m] [kg/m] [m] [m]

103524-001 25 x 2,3 10 65 11 0,50 13

103529-001 25 x 2,3 15 75 13 0,51 18

103533-001 25 x 2,3 10 75 13 0,55 13

103534-001 25 x 2,3 15 110 19 0,56 18

103518-001 25 x 2,3 10 80 14 0,60 13

150298-001 25 x 2,3 15 120 20 0,60 18

103535-001 25 x 2,3 10 90 15 0,70 13

103536-001 25 x 2,3 15 140 24 0,70 18

103537-001 25 x 2,3 10 115 19 0,79 13

103538-001 25 x 2,3 15 170 28 0,79 18

13

RAUGEO collect PE-Xa Energy PilesMade of cross-linked polyethylene (RAU-PE-Xa) according to DIN 16892/93, UV-stabilised, natural colour, with a grey protective layer of RAU-PE - Resistant to notches and grooves - Particularly small bending radius

Operating temperature: -40 °C to +95 °C


[m] [mm] [kg] [l]

135233-001 100 20 x 1,9 12 21

135243-001 100 25 x 2,3 18 33

RAUGEO collect PE-Xa plus Energy PilesWith the same properties of RAUGEO collect PE-Xa.Additional oxygen barrier according to DIN 4726.Operating temperature: -40 °C to +95 °C Art�-Nr� Delivery Length d x s Weight Pipe Volume

[m] [mm] [kg] [l]

135667-100 1 100 20 x 1,9 14 21

135697-001 1 100 25 x 2,3 19 331 Produced to order

14

EP Grid TieTo attach the RAUGEO pipework to the energy pileColour: black Art�-Nr� Weight Box Quantity Delivery Unit

[kg/100 pcs] [pc]

246899-001 0,15 100/5000 100

Twisting ToolAllows fast and comfortable twisting of the EP grid tie.Material: SteelColour: black Art�-Nr� Weight Box Quantity Delivery Unit

[kg/pc] [pc]

257304-003 0,44 1 1

REHAU Cable TiesPolyamide cable ties to attach pipework to the pile.Colour: natural Art�-Nr� Length Box Quantity Delivery Unit

[mm] [pc]

724458-100 290 100 100

724448-100 178 100 100

15

REHAU HDPE Casing PipeTo protect the upper area of enrgy pile pipework during installation.Corrugated outer layer of PE-HD, smooth inner layer of PE-HD. Impact resis-tant up to -25oC. Easy handling and installation due to low weight and high flexibility. Simple trimming with no special tools.

Art�-Nr� OD ID Delivery Form Length Bending Radius approx� Weight

[mm] [mm] [m] [m at 20 °C] [kg/m]

102801-006* 40 30 Coil 50 0,35 0,193

102811-006* 50 40 Coil 50 0,35 0,255

102821-006* 63 50 Coil 50 0,46 0,327

102831-006* 75 60 Coil 50 0,46 0,290

102841-006* 90 74 Coil 50 0,46 0,545

102851-006* 110 93 Coil 50 0,46 0,560

102861-006* 120 100 Coil 50 0,50 0,692

102871-006* 125 106 Coil 50 0,50 0,728

102881-006* 160 136 Coil 50 0,65 1,080

102891-006* 175 150 Coil 50 0,70 1,260


16

4 RAUGEO HELIX AND ACCESSORIES

RAUGEO Helix® Probe PE-XaMade of cross-linked polyethylene (RAU-PE-Xa) according toDIN 16892/93, UV-stabilised, natural colour (milky white), curved probe tip, pipe spacer grey/magenta.Operating temperature -40 °C to +95 °CExtendable from 1.1m (transportation / storage) to 3m (installationlength).Diameter approx. 36 cm.

Art�-Nr� d x s Pipe Length Weight Delivery Unit Description

[mm] [m] [kg/pc] [pc/wooden crate]

150118-001 25 x 2,3 42 8,9 15 4 m return (red), 0,2 m flow (blue)

150118-003* 25 x 2,3 42 9,4 15 4 m return (red), 3 m flow (blue)

150118-005* 25 x 2,3 42 8,1 15 compression sleeve coupler end


RAUGEO Header Pipe blue/redMade of high pressure cross-linked polyethylene (RAU-PE-Xa) according to DIN 16892/3, UV stabilised, natural colour with either a blue or red protective layer of RAU-PE. Used as connecting pipe for RAUGEO Helix ®

- Resistant against notches and grooves - Can be laid without a sand bed

Operating temperature: -40 °C to +95 °C Art�-Nr� Delivery Length d x s Weight Pipe Volume Colour

[m] [mm] [kg] [l]

938848-100* 100 25 x 2,3 18 33 Blue

938838-100* 100 25 x 2,3 18 33 Red

REHAU Pipe Bend Former 90°For bending the RAUGEO pipe 25 x 2,3Material: PolyamideColour: black Art�-Nr� Pipe Diameter Weight Packing Qty

[d] [kg/pc] [pc]

239193-001 25 0,11 25

®

17

5 RAUGEO SMALL MANIFOLD CHAMBER

Available in quarter 2 2014

RAUGEO Small Manifold Chamber - Empty Chamber Shell1-piece ground-source manifold chamber made from polyethylene (orange) to hold a RAUGEO CLICK manifold consisting of: - Chamber body - Chamber cover to EN124 A15 (MPA + TÜV tested) consisting of cover, can be walked on up to 200 kg, childproof due to inlaid seal and 2-way screw connection

Dimensions installation size in mm: 800 x 600 x 463Suitable for connecting pipe d20-d50


[kg]

313986-001 17 1

RAUGEO Pipe Duct SetSet consisting of a duct for the brine circuit on the inside of the chamber of the RAUGEO small manifold chamber or a duct for the main pipe on the inside of the chamber. Art�-Nr� For Pipe Dimension Weight Delivery Unit

[d] [kg/Set] [Set]

305716-001 d20 0,1 1

305718-001 d25 0,1 1

305719-001 d32 0,2 1

305723-001 d40 0,1 1

305724-001 d50 0,2 1

RAUGEO Brass End CapBrass cap to seal the dezincification-resistant brass (EZB) 2“ male thread of the manifold header. Art�-Nr� Description Delivery Unit

[pc]

218717-001 RAUGEO Brass cap 2“ 1

18

RAUGEO Small Manifold Chamber - Pre-fabricated DesignPre-assembled ground-source manifold chamber made from polyethylene (orange) to join the brine circuits, consisting of: - RAUGEO small manifold chamber empty chamber with pre-drilled ducts for the brine circuits and header pipes in the required amount and dimension with seals fitted in each case

- Pre-fabricated and pressure-tested RAUGEO CLICK manifold (flow and return) in the size required in each case

- RAUGEO CLICK push fitting sets in the required amount and dimension - Dimensions installation size 800 x 600 x 463 in mm:

Connection dimension 25 x 2,3, flow range 10-30 l/min* Art�-Nr� No� of Main connecting Flowmeter Manifold Weight Delivery Unit

connections pipe [l/min] combination [kg/pc] [pc]

313481-003 3 d40 10-30 1 x 3-port 24,4 1

313655-004 4 d40 10-30 1 x 4-port 23,5 1

313656-004 4 d50 10-30 1 x 4-port 22,3 1

313658-005 5 d40 10-30 1 x 5-port 25,7 1

313657-005 5 d50 10-30 1 x 5-port 24,6 1


port



313667-002 2 d40 10-30 1 x 2-port 22,3 1

313672-002 2 d50 10-30 1 x 2-port 22,3 1

313668-003 3 d40 10-30 1 x 3-port 23,5 1

103503-003 3 d50 10-30 1 x 3-port 23,5 1

313669-004 4 d40 10-30 1 x 4-port 24,6 1

313673-004 4 d50 10-30 1 x 4-port 24,6 1

313670-005 5 d40 10-30 1 x 5-port 25,7 1

313671-005 5 d50 10-30 1 x 5-port 25,7 1




313678-002 2 d40 10-30 1 x 2-port 22,3 1

103508-002 2 d50 10-30 1 x 2-port 22,3 1

313679-003 3 d40 10-30 1 x 3-port 23,5 1

103509-003 3 d50 10-30 1 x 3-port 23,5 1

313680-004 4 d40 10-30 1 x 4-port 24,6 1

313681-004 4 d50 10-30 1 x 4-port 24,6 1

313682-005 5 d40 10-30 1 x 5-port 25,7 1

103539-005 5 d50 10-30 1 x 5-port 25,7 1


19

6 RAUGEO MEDIUM MANIFOLD CHAMBERS

RAUGEO Medium Manifold ChamberComplete pre-fabricated manifold chamber, made of polyethylene, for connec-tion of brine circuits. Pressure tested in factory. Walkable cover up to 200kg.Length x width x height: 100 x 80 x 115cm. 63 x 5.8mm manifold headerpipe, made of PE 100. Welded watertight pipe stubs are 32 x 2.9mm or 40 x3.7mm, spaced 100mm apart. 1“ ball valve for ventilation. Available without flowmeters, with 1 ¼“ polymer ball valves on every circuit. Available with flowmeters, with 1 ¼“ polymer ball valves on all flow circuits and flowmeters on all return circuits.

RAUGEO Medium Manifold Chamber with Flowmeter*

Art�-Nr� Dimensions of No� of Flowmeter WeightConnections Connections [kg/pc]

354145-001 32 x 2,9 2 with 50,8

354155-001 32 x 2,9 3 with 52,9

354165-001 32 x 2,9 4 with 54,0

354175-001 32 x 2,9 5 with 56,1

354185-001 32 x 2,9 6 with 58,2

354195-001 32 x 2,9 7 with 60,4

354205-001 32 x 2,9 8 with 62,5

354225-001 40 x 3,7 2 with 51,1

354235-001 40 x 3,7 3 with 53,2

354245-001 40 x 3,7 4 with 54,3

354255-001 40 x 3,7 5 with 56,4

354265-001 40 x 3,7 6 with 58,5

354275-001 40 x 3,7 7 with 60,7

354285-001 40 x 3,7 8 with 62,8


RAUGEO Medium Manifold Chamber Accessories

Art�-Nr� Description Weight

[kg/pc]

355125-001 Concrete ring for Buoyancy 145

355145-001 Chamber Shaft Extension 600 x 400 x 6 (d x h x s) 7

20

7 RAUGEO LARGE MANIFOLD CHAMBERS

RAUGEO Large Manifold Chamber System

The combination of the RAUGEO large manifold chamber with the RAUGEO CLICK manifold system provides unprecedented flexibility. With only a small number of articles any manifold chamber can be assembled quickly and easily. Parts list for RAUGEO manifold chamber modular system

a) In combination with pre-fabricated RAUGEO CLICK manifolds

No� of connections Empty Chamber Brine circuit Header pipe RAUGEO CLICK RAUGEO CLICKseal set seal set manifold push fitting set

2-10 1 1 per circuit/port 1 1 1 per circuit/port

11-20 1 1 per circuit/port 2 2 1 per circuit/port

b) In combination with the RAUGEO CLICK modular system

No� of connections Empty Brine circuit Header pipe RAUGEO CLICK RAUGEO CLICK RAUGEO CLICKChamber seal set seal set Basis-Set Extension set push fitting set

2-10 1 1 per circuit/port 1 1 1 per circuit/port minus 1 1 per circuit/port

11-20 1 1 per circuit/port 2 2 1 per circuit/port minus 1 1 per circuit/port

See chapter 9 RAUGEO CLICK manifold for further details

RAUGEO Large Manifold Chamber - Empty Chamber Shell2-piece ground-source manifold chamber made from polyethylene (orange) to hold a RAUGEO CLICK manifold consisting of - Base element with carrying handles on both sides and eye hooks for - easy transport and handling - Chamber cone, can be screwed to the base element so that it is watertight - Chamber cover to ISO 15398 / DIN 1989 (MPA + TÜV tested) consisting of cover, frame and seal, can be walked on up to 200kg, childproof and surface water resistant due to inlaid seal and 4-way screw connection

Dimensions installation size: L 1300 x W 980 x H 1340Dimensions delivery format: L 1300 x W 980 x H 660 (cone turned upside down in the base element) Additionally includes: - Screw material for the watertight connection of the base element and cone - Sealing tape for sealing between the base element and cone - Adjustment for the manifold mounting support


[kg/pc] [pc]

305715-001 64 1

21

RAUGEO Pipe Duct SetSet consisting of 2 ducts for feeding the brine circuits through to the inside of the chamber of the RAUGEO large manifold chamber Art�-Nr� For Weight Delivery Unit

pipe dimension [kg/Set] [Set]

305716-001 d20 0,1 1

305718-001 d25 0,1 1

305719-001 d32 0,2 1

305723-001 d40 0,1 1

305724-001 d50 0,2 1

RAUGEO Header Pipe Duct SetSet consisting of 2 ducts for feeding the header pipes through to the inside of the chamber of the RAUGEO large manifold chamber Art�-Nr� For Weight Delivery Unit

pipe dimension [kg/Set] [Set]

305724-001 d50 0,2 1

305725-001 d63 0,2 1

311966-001 d75 0,3 1

RAUGEO LubricantLubricant for use on all connections of the RAUGEO CLICK large manifold and manifold chamber. Art�-Nr� Weight Delivery Unit

[kg/pc] [pc]

305709-001 0,1 1

RAUGEO Levelling SetSet consisting of 2 levels made from PE each for an additional support point for each compression sleeve manifold in the chamber base. Art�-Nr� Weight Delivery Unit

[kg/Set] [Set]

314001-001 0,9 1

RAUGEO Screw SetSpare parts set consisting of 5 screws for connecting the chamber cone to the base element. Art�-Nr� Weight Delivery Unit

[kg/Set] [Set]

314000-001 0,2 1

RAUGEO Sealing StripReplacement for the seal between the chamber cone and base element. Art�-Nr� Weight Delivery Unit

[kg/pc] [pc]

311982-001 0,1 1

22

RAUGEO Large Manifold Chamber - Pre-fabricated Design

RAUGEO Large Manifold ChamberPre-assembled ground-source manifold chamber made from polyethylene (orange) to join the brine circuits, consisting of - RAUGEO XL manifold chamber empty chamber with pre-drilled ducts for the brine circuits and header pipes in the required amount and dimension with seals fitted in each case

- Pre-fabricated and pressure-tested RAUGEO CLICK (flow and return) in the appropriate size required

- RAUGEO CLICK connection sets in the required number and dimensionDimensions installation size and delivery format: L 1300 x W 980 x H 1300Also includes: - Screw material for the watertight connection of the base element and cone - Sealing tape for sealing between the base element and cone - Adjustment for the manifold mounting support

Pipe dimension 25 x 2,3 flowmeter range 10-30 l/min*

Article No� No� of Flow rate Manifold- Weight Delivery Unitconnections [l/min] combination [kg/pc] [pc]

305454-002 2 10-30 1 x 2-port 70,0 1

305455-003 3 10-30 1 x 3-port 71,5 1

305456-004 4 10-30 1 x 4-port 72,8 1

305457-005 5 10-30 1 x 5-port 74,2 1

305458-006 6 10-30 1 x 6-port 75,8 1

305459-007 7 10-30 1 x 7-port 77,1 1

305463-008 8 10-30 1 x 8-port 78,5 1

305464-009 9 10-30 1 x 9-port 80,0 1

305465-010 10 10-30 2 x 5-port 81,4 1

305796-010 10 10-30 1 x 10-port 84,8 1

305466-011 11 10-30 1 x 5 port + 1 x 6-port 86,0 1

305467-012 12 10-30 2 x 6-port 87,5 1

305468-013 13 10-30 1 x 6-port + 1 x 7-port 88,9 1

305469-014 14 10-30 2 x 7-port 90,2 1

305473-015 15 10-30 1 x 7-port + 1 x 8-port 91,6 1

305474-016 16 10-30 2 x 8-port 93,0 1

305475-017 17 10-30 1 x 8-port + 1 x 9-port 94,5 1

305476-018 18 10-30 2 x 9-port 96,1 1

305477-019 19 10-30 1 x 9-port + 1 x 10-port 97,4 1

305478-020 20 10-30 2 x 10-port 98,9 1


23

Pipe dimension 32 x 2,9, flowmeter range 10-30 l/min* Article No� No� of Flow rate Manifold- Weight Delivery Unit

connections [l/min] combination [kg/pc] [pc]

305507-002 2 10-30 1 x 2-port 70,2 1

305508-003 3 10-30 1 x 3-port 71,7 1

305509-004 4 10-30 1 x 4-port 73,1 1

305513-005 5 10-30 1 x 5-port 74,5 1

305514-006 6 10-30 1 x 6-port 76,1 1

305515-007 7 10-30 1 x 7-port 77,6 1

305516-008 8 10-30 1 x 8-port 79,0 1

305517-009 9 10-30 1 x 9-port 80,7 1

305518-010 10 10-30 2 x 5-port 82,0 1

305798-010 10 10-30 1 x 10-port 85,4 1

305519-011 11 10-30 1 x 5 port + 1 x 6-port 86,7 1

305523-012 12 10-30 2 x 6-port 88,3 1

305524-013 13 10-30 1 x 6-port + 1 x 7-port 89,7 1

305525-014 14 10-30 2 x 7-port 91,1 1

305526-015 15 10-30 1 x 7-port + 1 x 8-port 92,6 1

305527-016 16 10-30 2 x 8-port 94,0 1

305529-017 17 10-30 1 x 8-port + 1 x 9-port 95,7 1

305533-018 18 10-30 2 x 9-port 97,2 1

305534-019 19 10-30 1 x 9-port + 1 x 10-port 98,7 1

305535-020 20 10-30 2 x 10-port 100,0 1


Pipe dimension 40 x 3,7, flowmeter range 10-30 l/min* Article No� No� of Flow rate Manifold- Weight Delivery Unit

connections [l/min] combination [kg/pc] [pc]

305563-002 2 10-30 1 x 2-port 70,2 1

305564-003 3 10-30 1 x 3-port 71,7 1

305565-004 4 10-30 1 x 4-port 73,1 1

305566-005 5 10-30 1 x 5-port 74,6 1

305567-006 6 10-30 1 x 6-port 76,1 1

305568-007 7 10-30 1 x 7-port 77,6 1

305569-008 8 10-30 1 x 8-port 79,0 1

305573-009 9 10-30 1 x 9-port 80,7 1

305574-010 10 10-30 2 x 5-port 82,0 1

305803-010 10 10-30 1 x 10-port 85,5 1

305575-011 11 10-30 1 x 5 port + 1 x 6-port 86,7 1

305576-012 12 10-30 2 x 6-port 88,3 1

305577-013 13 10-30 1 x 6-port + 1 x 7-port 89,8 1

305578-014 14 10-30 2 x 7-port 91,1 1

305579-015 15 10-30 1 x 7-port + 1 x 8-port 92,6 1

305583-016 16 10-30 2 x 8-port 94,0 1

305584-017 17 10-30 1 x 8-port + 1 x 9-port 95,7 1

305585-018 18 10-30 2 x 9-port 97,3 1

305586-019 19 10-30 1 x 9-port + 1 x 10-port 98,7 1

305587-020 20 10-30 2 x 10-port 100,1 1


24

8 RAUGEO CLICK MANIFOLD

RAUGEO CLICK manifoldPre-fabricated and pressure-tested modular manifold (flow and return) madefrom glass fibre-reinforced, heat and cold-resistant polymer with a high levelof insulation (heat conductivity 0.30 W/mK).Internal diameter of the compression sleeve manifold 2½“(64mm).

Every flow module with integrated shut-off device (ball valve ID 25). Everyreturn module with integrated shut-off device (ball valve ID 25) and polymerflowmeter (ID 25).Every connecting module with 2“ (50 mm) dezincification-resistant (EZB)male thread for connecting the header pipe as well as 3 x ½“ (12 mm) lateralconnections with female thread for fitting extras.Manifold outlets with bayonet connection for RAUGEO CLICKpush fitting for connecting the brine circuits.

Approved to max. test pressure 10 bar, max. operating pressure 6 bar.

Also includes: 6 dummy stoppers (pre-assembled), 2 x filling and drainingvalves ½“ (12 mm), 2 x bleed valve ½“ (12 mm), wall bracket set for therequired number of fixing points..

Pre-assembled manifold with flowmeter 10–30 Litres/min Article No� No� of Flow rate Manifold Length Weight Delivery Unit

connections [Litres/min] [mm] [kg] [pc]

304213-001 2 10–30 327 5,3 1

304223-001 3 10–30 419 6,5 1

304233-001 4 10–30 511 7,6 1

304243-001 5 10–30 603 8,7 1

304253-001 6 10–30 695 9,8 1

304263-001 7 10–30 787 10,9 1

304273-001 8 10–30 879 12,0 1

304283-001 9 10–30 971 13,1 1

304293-001 10 10–30 1.063 14,2 1

304303-001 11 10–30 1.155 15,3 1

304313-001 12 10–30 1.247 16,5 1

25

RAUGEO CLICK Manifold – Modular System

The modular system for manifold assembly consists essentially of three sets: the basic set that is required for every manifold, an expansion set toadd an additional brine circuit to each manifold, as well as a push fitting set to connect the brine circuits. In combination with the other sets, e.g.additional wall brackets or ball valves to connect the main pipes, you can fit any manifold variant you like yourself within a short time.This allows, even with low stock, the highest flexibility for each construction site requirement. You can therefore fit any manifold variant you likeyourself within a short time�

Parts list for RAUGEO CLICK modular system

No� of Basic-Set Expansion- Wall Bracket- Push Fitting-Set in Dimension��

circuits Set Set d20 d25 d32 d40 d50

5-15 l/min 304218-001 304224-001

10-30 l/min 304228-001 304234-001

30-60 l/min 305888-001 305889-001 304238-001 304226-001 304236-001 304246-001 304256-001 304266-001

2 circuits 1 1 0 2 2 2 2 2

3 circuits 1 2 0 3 3 3 3 3

4 circuits 1 3 0 4 4 4 4 4

5 circuits 1 4 0 5 5 5 5 5

6 circuits 1 5 1 6 6 6 6 6

7 circuits 1 6 1 7 7 7 7 7

8 circuits 1 7 1 8 8 8 8 8

9 circuits 1 8 1 9 9 9 9 9

10 circuits 1 9 1 10 10 10 10 10

11 circuits 1 10 1 11 11 11 11 11

12 circuits 1 11 2 12 12 12 12 12

No� of Ball Valve-Set Adapter Set for connecting the main pipe in Dimension… Manometer Reducing

circuits d40 d50 d63 d75 axial radial fitting

Mat.-Nr. 209896-001 209890-001 209891-001 209892-001 209893-001 353774-001 304968-001 354752-001

Quantity per 1 1 1 1 1 2 2 2

Manifold Articles can only be assembled in combination! Articles can only be assembled in combination!Acce

ssor

ies

Mod

ular

Sys

tem

26

RAUGEO CLICK Basic SetBasic set for the assembly on the construction site of a modular manifoldmade from glass fibre-reinforced, heat and cold-resistant polymer with a highlevel of insulation (heat conductivity 0.30 W/mK), internal diameter of thecompression sleeve manifold 2½“ (64 mm).

Comprising 2 connecting and 2 end modules (for the flow and return respec-tively). Every connecting module with 2“ (50 mm) dezincification-resistant (EZB) male thread for connecting the header pipe as well as 3 x ½“ (12 mm) lateral connections with female thread for fitting extras.End module (flow) with integrated shut-off device (ball valve ID 25). End module (return) with integrated shut-off device (ball valve ID 25) and polymer flowmeter (ID 25).Manifold outlets with bayonet connection for RAUGEO CLICKpush fitting for connecting the brine circuits.Approved to max. test pressure 10 bar, max. operating pressure 6 barAlso includes: 2 dummy stoppers, 2 × filling and draining valves ½“ (12 mm),2 × bleed valve ½“ (12 mm), 1 × wall bracket for 2 fixing points. Art�-Nr� Flow Rate Weight Delivery Unit Packaging Unit

[Liter/min] [kg/Set] [Set] [Sets/Karton]

304228-001 10–30 4,2 1 10

RAUGEO CLICK Expansion SetExpansion set for 1 brine circuit for the assembly on the construction site ofa modular manifold made from glass fibre-reinforced, heat and cold-resistantpolymer with a high level of insulation (heat conductivity 0.30 W/mK), internaldiameter of the compression sleeve manifold 2½“ (64 mm).

Comprising 2 modules (flow and return) for connecting 1 brine circuit. Flowmodule with integrated shut-off device (ball valve ID 25). Return module withintegrated shut-off device (ball valve ID 25) and polymer flowmeter (ID 25).Manifold outlets with bayonet connection for RAUGEO CLICK push fitting for connecting the brine circuit.

Approved to max. test pressure 10 bar, max. operating pressure 6 bar. Art�-Nr� Flow Rate Weight Delivery Unit Packaging Unit

[Liter/min] [kg/Set] [Set] [Sets/Karton]

304234-001 10–30 1,1 1 10

27

RAUGEO CLICK Push Fitting SetPush fitting set for RAUGEO CLICK manifold for the connection of 1 brine circuit.Comprising 2 polymer transparent push connections with insertion depthmark for PE and PE-X pipes.

RAUGEO CLICK Push Fitting Set Art�-Nr� Pipe Dimension Weight Delivery Unit Packaging Unit

[kg/Set] [Set] [Sets/Karton]

304226-001 d20 0,12 1 50

304236-001 d25 0,15 1 50

304246-001 d32 0,16 1 50

304256-001 d40 0,20 1 50

304266-001 d50 0,25 1 50

RAUGEO CLICK Tool SetTool set for removing plastic pipes from RAUGEO CLICK push fittingsSupply: 1 Tool Set per dimension

Art�-Nr� Pipe Dimension Weight Delivery Unit

[kg/Set] [Set]

304988-001 d20 0,02 1

304989-001 d25 0,04 1

304993-001 d32 0,05 1

304994-001 d40 0,07 1

304995-001 d50 0,10 1

28

RAUGEO Pipe TrimmerUniversal tool for trimming PE and PEX pipes of the dimensions d20-d50before fitting the pipe in RAUGEO CLICK push fittings. Art�-Nr� Weight Delivery Unit

[kg] [pc]

209895-001 0,4 1

RAUGEO CLICK Wall Bracket SetPolymer wall bracket for the offset assembly of a RAUGEO CLICK manifold(flow and return) for 2 fixing points.Scope of supply: 2 wall brackets for the flow and returnrespectively. Fixing materials (screws and dowels) included. Art�-Nr� Weight/Set Delivery Unit Packaging Unit

[kg] [Set] [Sets/box]

304238-001 0,4 1 10

RAUGEO CLICK ThermomanometerCombination of thermometer and manometer for measuring the temperatureand pressure in the flow and return of a RAUGEO CLICK manifold with rear orlateral connection.Measurement range 0–6 bar and −20°C to +60°C. Scope of supply includes½“ (12 mm) Service Automatic valve.The reducing fitting R ⅜“ × Rp ½“ is required to fit the manifold.

Art�-Nr� Connection Weight Delivery Unit

[kg/pc] [pc]

353774-001 Rear connection (axial) 0,13 1

304968-001 Lateral connection (radial) 0,13 1

354752-001 Reducing fitting 0,05 1

29

RAUGEO CLICK Metal Ball Valve SetSet consisting of 2 ball valves with 2“ connection threads for shutting off theheader pipes from the manifold.Material: Brass nickel-plated

Supply: 2 Ball Valves per Set


[kg/Set] [Set]

209896-001 2,6 1

RAUGEO CLICK Adapter Set for Metal Ball Valve SetAdapter set for connecting the header pipes to the RAUGEO CLICK manifoldMaterial: Dezincification-resistant brass

Supply: 2 adapters per set

Art�-Nr� For connecting the pipe dimension Weight Delivery Unit

[kg/Set] [Set]

209890-001 d40 1,5 1

209891-001 d50 1,7 1

209892-001 d63 1,9 1

209893-001 d75 3,4 1

RAUGEO LubricantLubricant for use with all connections of RAUGEO CLICK manifolds and large manifold chambers. Art�-Nr� Weight Delivery Unit

[kg/pc] [pc]

305709-001 0,1 1

30

RAUGEO PE-Xa Header Pipes SDR 11Made of high pressure cross-linked polyethylene (PE-Xa), according to DIN16892/93. UV stabilised. Colour - natural with a grey protective layer of RAU-PE.Delivered in coils.- Resistant to notches and grooves- No sand bed needed for installationsOperating temperatures: -40oC to +95oC Art�-Nr� d x s Delivery Unit Weight

[mm] [m] [kg/m]

136407-030 50 x 4,6 30 0,67

136407-050 50 x 4,6 50 0,67

136407-100 50 x 4,6 100 0,67

136417-030 63 x 5,8 30 1,06

136417-050 63 x 5,8 50 1,06

136417-100 63 x 5,8 100 1,06

136427-030* 75 x 6,8 30 1,48

136427-050* 75 x 6,8 50 1,48

136427-100* 75 x 6,8 100 1,48

*Delivery time on request

RAUGEO PE-RC Header Pipes SDR 11Made of polyethylene resistant to crack (PE100-RC) to PAS 1075. UV stabi-lised.Colour - black. Delivered in coils.Operating temperatures: -20oC to +40oC

Art�-Nr� d x s Delivery Length Weight

[mm] [m] [kg/m]

136835-030 50 x 4,6 30 0,67

136835-050 50 x 4,6 50 0,67

136835-100 50 x 4,6 100 0,67

136855-030 63 x 5,8 30 1,06

136855-050 63 x 5,8 50 1,06

136855-100 63 x 5,8 100 1,06

136865-030 75 x 6,8 30 1,48

136865-050 75 x 6,8 50 1,48

136865-100 75 x 6,8 100 1,48

9 RAUGEO ACCESSORIES

31

RAUGEO PE100 Header Pipes SDR 11Made of polyethylene according to DIN 8074/75. UV stabilised.Colour - black. Delivered in coils.Note: Non-crosslinked PE must be installed in sand beds!Operating temperatures: -20oC to +40oC Art�-Nr� d x s Delivery Length Weight

[mm] [m] [kg/m]

135695-030 40 x 3,7 30 0,42

135695-050 40 x 3,7 50 0,42

135695-100 40 x 3,7 100 0,42

136388-030 50 x 4,6 30 0,67

136388-050 50 x 4,6 50 0,67

136388-100 50 x 4,6 100 0,67

136458-030 63 x 5,8 30 1,06

136458-050 63 x 5,8 50 1,06

136458-100 63 x 5,8 100 1,06

136468-030 75 x 6,8 30 1,48

136468-050 75 x 6,8 50 1,48

136468-100 75 x 6,8 100 1,48

RAUGEO Protective TapeFor the protection of RAUGEO brass fittings in the ground.

Art�-Nr� Length Width Delivery Unit

[m] [mm] [pc]

223449-001 5 50 1

32

10 RAUGEO COMPRESSION SLEEVE TECHNOLOGY

For RAUGEO Probes, Collect, Helix and Energy piles with PE-Xa and PE-Xa plus

Brass fittings installed in the soil must be wrapped with shrink tape. All articles from this chapter are available in larger dimensions on request�

REHAU EVERLOCTM Compression Sleeve, SDR 11For sliding on REHAU EVERLOCTM compression sleeve fitting SDR 11 in conjunction with RAUGEO pipes SDR 11.Material: CuZn39Pb3 Art�-Nr� Dimension a b Weight Box Quanitity Delivery Unit

[mm] [mm] [mm] [kg/pc] [pcs] [pcs]

139562-001 20 x 1,9 20 25 0,022 100 100

139572-001 25 x 2,3 27 30 0,040 50 50

139492-001 32 x 2,9 35 40 0,080 50 50

138683-001 40 x 3,7 37 49 0,131 25 25

138693-001 50 x 4,6 44 61 0,260 25 25

138703-001 63 x 5,8 53 74 0,390 25 25

REHAU Straight Coupler, SDR 11REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUGEO pipes SDR 11 and REHAU EVERLOCTM compression sleeves SDR 11. Art�-Nr� Dimension a z Weight Box Quantity Delivery Unit


169008-001 20 x 1,9 53 23 0,062 50 10

169010-001 25 x 2,3 67 24 0,093 50 10

169013-001 32 x 2,9 80 26 0,180 30 3

169015-001 40 x 3,7 90 28 0,380 25 5

169144-001 50 x 4,6 104 28 0,570 1 1

169142-001 63 x 5,8 122 35 0,940 1 1

z

a

33

REHAU Reducing Coupler, SDR 11REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUGEO pipes SDR 11 and REHAU EVERLOCTM compression sleeves SDR 11.Material: Brass Art�-Nr� Dimension a z Weight Box Quantity Delivery Unit


169012-001 25 x 2,3 - 20 x 1,9 61 24 0,070 50 10

169014-001 32 x 2,9 - 25 x 2,3 74 25 0,140 30 3

169017-001 40 x 3,7 - 32 x 2,9 87 28 0,260 25 5

169016-001 40 x 3,7 - 20 x 1,9 83 36 0,280 25 5

169147-001 50 x 4,6 - 40 x 3,7 99 28 0,480 1 1

169148-001 63 x 5,8 - 50 x 4,6 117 32 0,760 1 1

z

a

34

REHAU T-piece, SDR 11REHAU EVERLOCTM compression fitting with moulded support ridges for use with RAUGEO Pipe SDR 11 and REHAU EVERLOCTM compression sleeves SDR 11. Art�-Nr� Size Dimension mm Weight Box Quantity Delivery

Unita b c z1 z2 z3 [kg/pc�]

Equal Tee

169045-001 20 x 1,9 40 43 40 25 28 25 0,135 50 pcs. 10 pcs.

169056-001 25 x 2,3 50 54 50 29 32 29 0,200 50 pcs. 10 pcs.

169063-001 32 x 2,9 59 64 59 32 37 32 0,400 30 pcs. 3 pcs.

169072-001 40 x 3,7 67 77 67 43 53 43 0,770 25 pcs. 1 pc.

169156-001 50 x 4,6 88 87 88 49 48 49 0,870 25 pcs. 1 pc.

169167-001 63 x 5,8 105 108 105 59 62 59 2,350 25 pcs. 1 pc.

Tee one end and branch reduced

169049-001 25 - 20 - 20 47 46 41 26 31 26 0,165 50 pcs. 10 pcs.

169060-001 32 - 25 - 25 56 58 50 29 36 29 0,280 30 pcs. 3 pcs.

169070-001 40 - 32 - 32 69 67 63 37 40 36 0,580 1 pcs. 1 pc.

169151-001 50 - 25 - 40 82 69 74 43 47 42 0,820 1 pc. 1 pc.

169153-001 50 - 32 - 40 72 75 73 33 48 41 0,720 1 pc. 1 pc.

169160-001 63 - 32 - 50 98 82 88 52 53 49 1,200 1 pc. 1 pc.

169162-001 63 - 40 - 40 98 87 81 52 55 49 1,400 1pc. 1 pc.

169163-001 63 - 40 - 50 97 87 89 51 55 50 1,600 1 pc. 1 pc.

169165-001 63 - 50 - 50 97 94 89 51 55 50 1,600 1 pc. 1 pc.

Tee branch reduced

169053-001 25 - 20 - 25 48 47 48 26 32 26 0,184 50 pcs. 10 pcs.

169059-001 32 - 20 - 32 54 51 54 27 36 27 0,290 30 pcs. 5 pcs.

169061-001 32 - 25 - 32 57 58 57 30 36 30 0,310 30 pcs. 3 pcs.

169068-001 40 - 20 - 40 62 57 62 30 42 30 0,580 1 pc 1 pc.

169069-001 40 - 25 - 40 67 66 67 43 44 43 0,670 1 pc 1 pc.

169071-001 40 - 32 - 40 67 72 67 43 45 43 0,700 1 pc 1 pc.

169077-001 50 - 20 - 50 69 62 69 30 47 30 0,810 1 pc 1 pc.

169152-001 50 - 25 - 50 73 69 73 34 47 34 0,830 1 pc 1 pc.

169154-001 50 - 32 - 50 72 75 80 33 48 41 0,820 1 pc 1 pc.

169155-001 50 - 40 - 50 81 80 81 42 48 42 0,900 1 pc 1 pc.

169159-001 63 - 25 - 63 83 79 83 37 57 37 1,200 1 pc. 1 pc.

169161-001 63 - 32 - 63 87 85 87 41 58 41 1,200 1 pcs 1 pc.

169164-001 63 - 40 - 63 92 90 92 46 58 46 1,700 1 pc. 1 pc.

169166-001 63 - 50 - 63 98 97 98 52 58 52 1,900 1 pc. 1 pc.

Outlet enlarged

169047-001 20 - 25 - 20 43 50 43 28 28 28 0,167 50 pcs. 10 pcs.

Tee one end reduced

169055-001 25 - 25 - 20 50 54 43 29 32 28 0,196 50 pcs. 10 pcs.

169062-001 32 - 32 - 25 59 64 53 32 37 32 0,350 30 pcs. 3 pcs.

35

REHAU Male Adapter with Male Thread, SDR 11REHAU EVERLOCTM compression sleeve with moulded support ridges for use with RAUGEO pipes SDR 11 and REHAU EVERLOCTM compression sleeves SDR 11. Art�-Nr� Size Dimension mm SW Weight Box Quantity Delivery Unit

a z [kg/pc]�

169097-001 20 x 1,9 - R ½“/L15 54 39 26 0,082 50 pcs. 10 pcs.

169098-001 20 x 1,9 - R ¾“/L18 53 38 28 0,095 50 pcs. 10 pcs.

169105-001 25 x 2,3 - R ¾“ 63 42 31 0,125 50 pcs. 10 pcs.

169104-001 25 x 2,3 - R 1“/L22 63 41 35 0,160 50 pcs. 10 pcs.

169109-001 32 x 2,9 - R 1“/L22 69 42 40 0,240 30 pcs. 3 pcs.

169111-001 40 x 3,7 - R 1 ¼“ 82 50 36 0,350 25 pcs. 5 pcs.

169149-001 50 x 4,6 - R 1 ¼“ 89 50 41 0,480 1 pc. 1 pc.

169143-001 50 x 4,6 - R 1 ½“ 89 50 41 0,510 1 pc. 1 pc.

169141-001 63 x 5,8 - R 2“ 105 59 55 0,800 1 pc. 1 pc.

z

a

REHAU Elbow 90°, SDR 11REHAU EVERLOCTM compression sleeve with moulded support ridges for use with RAUGEO pipes SDR 11 and REHAU EVERLOCTM compression sleeves SDR 11. Art�-Nr� Dimension a z Weight Box Quantity Delivery Unit

[mm] [mm] [kg/pc] [pcs] [pcs]

169124-001 20 x 1,9 44 29 0,107 50 10

169126-001 25 x 2,3 54 32 0,160 50 10

169128-001 32 x 2,9 64 37 0,290 30 3

169130-001 40 x 3,7 74 42 0,520 1 1

169145-001 50 x 4,6 87 48 0,820 1 1

169146-001 63 x 5,8 106 60 1,500 1 1

a

z

z

a

36

11 JOINTING TECHNIQUE ELECTROFUSION COUPLER

For RAUGEO Probe, Collect, Helix and Energy Pile made from PE 100, PE-100-RC and PE-Xa

All articles from this section are available in larger dimensions on request�

Material: PE 100, PN 16Safety factor 1,25Medium: Air and water Note: Not suitable for RAUGEO PE-Xa Plus pipes!

Temperature Pressure Service Life

20 °C 16,0 bar 50 years

30 °C 12,8 bar 50 years

40 °C 9,6 bar 50 years

50 °C 6,4 bar 15 years

REHAU Electrofusion Coupler (ESM)REHAU electrofusion fitting with internal welding wires for the welding of PE-Xa pipes and pipes made from PE 63, PE 80, PE 100.Material: PE 100, black, UV stabilisedPressure level: PN 16Not suitable for pipes with EVAL barrier layer Art�-Nr� Dimension L D A Z Weight Packaging Unit

[mm] [mm] [mm] [mm] [kg/pc] [pc]

218372-001 25 71 36 38 2 0,040 1

218446-001 32 80 44 41 2 0,065 1

218447-001 40 90 55 45 3 0,100 1

218448-001 50 100 68 52 3 0,152 1

218449-001 63 118 82 58 3 0,240 1

REHAU ESM-T-piece, UniformREHAU electrofusion fitting with internal welding wires for the welding of PE-Xa pipes and pipes made from PE 63, PE 80, PE 100. A REHAU electrofusion coupler in the relevant dimension is also necessary for the outlet..Material: PE 100, black, UV stabilisedPressure level: PN 16Not suitable for pipes with EVAL barrier layer. Art�-Nr� Dimension mm L L1 D H Weight Packaging Unit

d - d1 - d [mm] [mm] [mm] [mm] [kg/pc] [pc]

218451-001 25-25-25 104 40 44 43 0,097 1

218452-001 32-32-32 104 39 44 74 0,097 1

218453-001 40-40-40 121 44 56 90 0,176 1

218454-001 50-50-50 139 49 68 102 0,270 1

218455-001 63-63-63 166 58 82 119 0,434 1

37

REHAU ESM Reducer SleeveREHAU electrofusion fitting with internal welding wires for the welding of PE-Xa pipes and pipes made from PE 63, PE 80, PE 100.Material: PE 100, black, UV stabilisedPressure level: PN 16Not suitable for pipes with EVAL barrier layer Art�-Nr� Dimension L A B Z Weight Packaging Unit

d1 - d2 [mm] [mm] [mm] [mm] [kg/pc] [pc]

218456-001 32-25 80 39 42 7 0,050 1

218457-001 40-25 90 39 47 6 0,093 1

218458-001 40-32 90 42 47 8 0,093 1

218459-001 50-25 100 42 47 7 0,112 1

218461-001 50-32 98 44 52 11 0,118 1

218462-001 50-40 98 48 52 6 0,136 1

218463-001 63-32 118 44 58 22 0,178 1

218464-001 63-40 118 48 58 17 0,190 1

218465-001 63-50 118 53 58 12 0,224 1

REHAU ESM 45o ElbowREHAU electrofusion fitting with internal welding wires for the welding of PE-Xa pipes and pipes made from PE 63, PE 80, PE 100.Material: PE 100, black, UV stabilisedPressure level: PN 16Not suitable for pipes with EVAL barrier layer Art�-Nr� Dimension L L1 D Weight Packaging Unit

[mm] [mm] [mm] [kg/pc] [pc]

218466-001 32 95 39 44 0,075 1

218467-001 40 108 44 56 0,125 1

218468-001 50 124 49 68 0,196 1

218469-001 63 149 58 82 0,275 1

REHAU ESM 90° ElbowREHAU electrofusion fitting with internal welding wires for the welding of PE-Xa pipes and pipes made from PE 63, PE 80, PE 100.Material: PE 100, black, UV stabilisedPressure level: PN 16Not suitable for pipes with EVAL barrier layer Art�-Nr� Dimension L L1 D Weight Packaging Unit

[mm] [mm] [mm] [kg/pc] [pc]

218471-001 25 66 35 36 0,128 1

218472-001 32 79 39 44 0,090 1

218474-001 40 93 44 56 0,145 1

218475-001 50 109 49 68 0,221 1

218476-001 63 132 58 82 0,333 1

38

REHAU ESM Transition Socket With Male Thread (Brass Male Thread)REHAU electrofusion fitting with internal welding wires for the welding of PE-Xa pipes and pipes made from PE 63, PE 80, PE 100.Material: PE 100, black, UV stabilisedPressure level: PN 16Not suitable for pipes with EVAL barrier layer

Art�-Nr� Dimension L L1 L2 D2 Width Across Flat Weight Packaging Unit

[mm] [mm] [mm] [mm] [mm] [kg/pc] [pc]

218477-001 25 - R¾“ 98 61 29 19 32 0,150 1

218478-001 32 - R1“ 114 76 34 23 40 0,256 1

218479-001 40 - R1 ¼“ 126 83 36 29 50 0,468 1

218481-001 50 - R1 ½“ 136 88 36 38 55 0,548 1

218482-001 63 - R2“ 159 102 41 48 70 0,894 1

39

www.rehau.co.uk/groundsource 827300/12 EN 04.2014

RAUGEO GROUND SOURCE SOLUTIONSUNIVERSAL APPLICATION

Ground-source probesRAUGEO PE-Xa probe:Highest reliability for boreholes upto 200m deepRAUGEO PE100/-RC probe:Latest generation of PE-100 RC vertical probesRAUGEO HPR high pressure deep probe: Extracting ground-source heat from depths of up to 800 m RAUGEO coaxial probes:Using radial drilling to extract ground-source energy.

Spiral probesRAUGEO Helix PE-Xa: The compact method of using ground-source heat at depths of 4-5 m.

Ground-source collectorsRAUGEO collect PE-Xa: Highest quality horizontal collectors for depths of 1-2 m.RAUGEO collect PE100/-RC: Latest generation of PE100 RC horizontal collector for depths of 1-2m.

Energy pilesRAUGEO collect PE-Xa: Extracting ground-source energy from foundation piles at depths up to 20m.

Follow REHAU Renewables

Our verbal and written advice relating to technical applications is based on experience and is to the best of our knowledge correct but is given without obligation. The use of REHAU products in conditions that are beyond our control or for applications other than those specified releases us from any obligations in regard to claims made in respect of the products. We recommend that the suitability of any REHAU product for the intended application should be checked. Utilization and processing of our products are beyond our control and are therefore exclusively your responsibility. In the event that a liability is nevertheless considered, then this will be based exclusively on our conditions of sale, which can be seen under www.rehau.de/LZB. This also applies to any warranty claims, whereby the warranty assumes consistent quality of our products in accordance with our specification.This document is protected by copyright. The rights conferred therein, particularly those relating to translation, reprinting, extraction of figures, electronic transmission, reproduction by photomechanical or similar means and storage on data processing equipment, remain reserved.

UK & IRELAND SALES OFFICESLondon, REHAU Ltd, The Building Centre, 25 Store Street, London WC1E 7BT Slough, Units 5 J & K, Langley Business Centre, Station Road, Langley, Slough SL3 8DS Phone: 01753 588500 Fax: 01753 588501 Manchester, Brinell Drive, Irlam, Manchester M44 5BL Phone: 0161 777 7400 Fax: 0161 777 7401 Glasgow, Phoenix House, Phoenix Cres-cent, Strathclyde Business Park, Bellshill, North Lanarkshire ML4 3NJ Phone: 01698 503700 Fax: 01698 503701 Dublin, 9 St. Johns Court, Business Park, Swords Road, Santry, Dublin 9 Phone: 00353 (0)1 8165020 Fax: 00353 (0)1 8165021

Documents

RAUGEO GROUND-SOURCE SYSTEMS - Rehau · raugeo ground-source systems innovative heating & cooling solutions parts list 827300/12 en. 2 ... 131703-150 150 32 x 2,9 169 323