RAW MATERIALS SPECIFICATIONS DESCRIPTION PACKAGING

RAW MATERIALS SPECIFICATIONS

DESCRIPTION PACKAGING QTY.02-10-00001 Acetyl salicylic

acid pregran p.s as per attached list USP23,BP98

25-50 kg F.D or P.D

2 ton

02-10-00002 Acid ascorbic fine powder USP 23, BP 98

25-50 kg F.D or P.D

100 kg

02-10-00003 Acid benzoic USP 23 BP 98

25-50 KG F.D Or p.D

02-10-00004 Acid Citric monohydrate USP 23, BP 98

25-50 kg F.D or P.D

35 ton

02-10-00005 Acid Folic USP23,BP98

1 kg can. 300 kg

02-10-00006 Amiloride HCL USP 23 BP98

25kg F.D or P.D 20 ton

02-10-00007 Acid Salicylic USP23,BP98

25-50 kg F.D 6 ton

02-10-00008 Acid stearic proifiied 50 PPM butylated Hydroxy luene

25-50 kg F.D or 25kg multilayer papec bag lined with nylon on pallet

5000 kg

02-10-00009 to be added USP23 (NF18) , BP98

500 kg

02-10-00010 Acid trataric BP98 ,USP 23 (NF18)

25-50 kg F.D or 25kg multilayer papec bag lined with nylon on pallet

3 ton

02-10-00011 Amitriptyline HCL F.P BP98

5 kg can or 25 kg F.DorP.D

20 ton

02-10-00012 Aerosil 130 v USP23(NF18)

10-20 kg multi layer paper bags lined with nylon on pallet

50 ton

Amoxyllin tryhydrate compact bulk density .68% sieve analysis

25 l galvanized I.D or 25 L. Alum. D.

15000 kg

Alcohol Benzyl USP23 (NF18) BP98

02-10-00014 Amoxyllin tryhydrate v.f.p 100% below 125 micro

25-50 kg F.D or multilayer paper bags lined with nylon on pallet

50000 kg

02-10-00015 Atenolol BP98 25 kg F.D or P.D 02-10-00016 Alcohol phenyl ethyl

USP23 25 kg galvanized I.D

02-10-00013

02-10-00017 Aspartam USP23 25-50 kg F.D or P.D

02-10-00018 Aluminium Hydroxid dried gel Loos density N.L.T 0.25 gm/ml

25-50 kg F.D 15,000 Kg

USP23(m.l.t AS IN BP98)

02-10-00019 Allupurinal F.pdr BP98,USP23

25 kg F.D or P.D

02-10-00020 Acetazolamide BP98,USP23

25 kg F.D or P.D

02-10-00021 Aneurine HCL (thiamin HCL) USP23,BP98

25-50 kg F.D or 25kg alum. Sachet in hard carton box

02-10-00022 Acid citric anhydrous USP23,BP98

25-50 kg F.D or hard cartone

02-10-00023 Ampicillin trihydrate P.S

25 –50 kg F.D plastic drum or alum.Sachet in hard carton box

10% over 900 micron

50% over 400 micron

90% over 100 micron

Bulk density 0.68+5% gm/ml USP23,BP98

02-10-00024 Ampicillin trihydrate V.F.P. USP23,BP98

25-50 kg F.D or 25kg alum. Sachet in hard carton box

Acid Isonicotinic hydrazide USP23,BP98

25-50 kg F.D or P.D

Benzoyl Metronidazol micronized tapped dinsity 0.8 g/m at 500

25-50 kg F.D or P.D

jolts USP 2302-10-00025 Bromohexine HCL BP98 25 kg F.D 5-10 kg

Alum Con.02-10-00026 Betamethason

disodium phosphate USP23,BP98

100-500 g alum. Con

02-10-00027 Biotin USP23 10 gm Alum. Con. 02-10-00028 Betamethazeone

valerate v.f.p 100% should pass

100-500g alum. Con.

2 ton

B.S seive NO.125 USP23,BP98

02-10-00029 Captopril USP23,BP98 disulphit free

25 kg F.D or P.D 400 kg

02-10-00030 Caffeine anhydrous fine pdr. BP98,USP23

25-50 kg F.D or P.D

2 ton

02-10-00031 Calamine micronize (medium p.s 27 micro +M.L.T BP98,USP23


500 kg

02-10-00032 Choli calciferol 40 million units/gm (vit .D3) USP23,BP98

5 –10 gm alum. Con.

10 kg

02-10-00033 Cloxacillin sod. Compacted BP98,USP23 P.S

25 –50 kg F.D or plastic drum or alum.Sachet in hard carton box

10 ton

10% over 900 micron

50% over 400 micron 1 ton

90% over 100 micron 4 ton

Bulk density 0.63 gm/ml

2 ton

02-10-00034 Cephalexine monohydrate (bulk density 0.68 +5% gm/ml)P.S


30000 Kg

10% over 900 micron

50% over 400 micron

90% over 100 micron

USP23,BP9802-10-00035 Cephalexin

monohydrate v.f.p BP98,USP23 100%


below 125 micron by microscopical exam.

60 ton

02-10-00036 Calcium pantothinate USP23,BP98


02-10-00037 Calcium phosphate Dibasic USP23


02-10-00038 Calcium sulphate dihydrate USP23(NF18)

25 kg F.D or P.D or alum. Sachet in hard carton box

02-10-00039 Carneuba wax BP98 ,USP23(NF18)

50 kg F.D or multilayer paper bag lined with nylon on pallet

02-10-00040 Cemitidine F.P BP98,USP23

25-50 kg F.D or P.D

02-10-00041 Chloramphenicol micronized 85% less than 10 micronUSP23,BP98

25 –50 kg F.D plastic drum or alum.Sachet in hard carton box

02-10-00042 Chlordiazepoxide (base) fine powder USP23,BP98


1 ton

02-10-00043 Chlorbutol (chlorobutanol) USP23(NF18),BP98

50 kg F.D or P.D 2 ton

02-10-00044 Chlorocresol BP98,USP23(NF18)

25 kg galvanized I.D

10 ton

02-10-00045 Chlorpheniramine maleate USP23,BP98

10 kg alum. Con.

02-10-00046 Clidinium bromide USP23

25-50 kg F.D or P.D

02-10-00047 Clobetasol propionate as attached list

100-500 g alum. Con.

02-10-00048 Crossscarmellose sodium Type A USP23(NF18),BP98

25-50 kg F.D or P.D multilayer paper bag lined with nylon on pallet

02-10-00049 Codeine phosphate USP23,BP98

5-10 kg alum. Con.

02-10-00050 Cyproheptidine HCL USP23,BP98

25-50 kg F.D or P.D

1000 kg

02-10-00051 color blue No.2 alum. Lake CFR-FDA, color additive

2.5-5 kg Con. 25 kg

02-10-00052 Colour yellow no.10 W.S

02-10-00053 Color Opa dry white (spacific method)

25 kg F.d or P.d or polyethylene bags in hard carton box

5 ton

02-10-00054 Color Opa dry orange (spacific method )

25 kg F.d or P.d or polyethylene bags in hard carton box

02-10-00055 Cyanocobalamine USP23,BP98

100-200 g alum. Con. Or glass stopper bottle

02-10-00056 Colour Opa ox 5564 pink (specific method)


02-10-00057 Carbamazepine BP98,USP23

25-50 kg F.D or P.D

02-10-00058 Colour orang deep water soluble 2055 CFR-FDA colour addetives

2.5 –5 kg alum. Or P.container

02-10-00059 Colour mint 2076 CFR-FDA (colour additives)

2.5 – 5 kg alum. Or p.container

02-10-00060 Dextromethorphan HBr. USP23,BP98

5 kg con. 500 kg

02-10-00061 Diastase malt J.P 25-50 kg F.D or P.D multilayer paper bag lined with nylon on pallet

25 kg

02-10-00062 calowr yellow D& C NO- 10 Alem -lake CFR, FDA Cedoae addities

2-5-5 kg can

02-10-00063 Diazepam USP23,BP98 25 kg F.D or P.D 12 ton

02-10-00064 Dextropropoxyphene napsylate BP98


02-10-00065 Diethylamine salicylats PB98

25 –50 kg F.D or P.D

250 kg

02-10-00066 Diclofenac sodium Fine powder white to off white cryst powder


PH of 1% solution = 7-8.5 m.p 278-279�c ,

15 KG

idehification by I.R comply

400 kg

Heavy metals : n.m.t. 10 ppm

2 ton

Arsenic : n.m.t. 2 ppm (BP98)

500 kg

L.O.D : n.m.t. 0.5 %

1.5 ton

Assay : n.l.t. 99%

3 ton

Calcolated with referance to the dried substance by

50 kg

non aqueous titration USP23 supp6

2 ton

02-10-00067 Diphenhydramine HCL fine pdr. USP23,BP98

25 kg F.D or P.D

02-10-00068 Dexamethazone v.f.p USP23,BP98


02-10-00069 Dexamethazone sodium Phosphate USP23,BP98


02-10-00070 Dioctyl sodium Sulphosuccinate (Docusate sod. ) USP23,BP98

25 kg F.D 25 kg

02-10-00071 Diphenoxylate HCL USP23,BP98

5 kg F.D or P.D

02-10-00072 Dextran 70 medical gradu.

02-10-00073 Dipyridamol 1pdr. BP98,USP23

25 kg F.D or P.D

02-10-00074 Doxycyclin hyclate BP98,USP23

25 kg F.D or P.D 5,000 kg

02-10-00075 Digitoxin USP23,BP98 25 kg F.D or P.D 2.5 ton

02-10-00076 Ethambutol HCL BP98,USP 23

25 kg F.D or P.D 5,000 Kg

02-10-00077 Ethyl cellulose standard type viscosity grade 20 centipose USP23(NF18)

50 kg F.D or P.D multilayer paper bag lined with nylon on pallet

200 kg

02-10-00078 Eudragit L solid 100 (specific method )

25 kg F.D or polyethylene bag in hard carton box

5,000 Kg

02-10-00079 Eudragit E liquid 12.5 (specific method )


02-10-00080 Erythromycin ethyl succinate 100% below 125 micron by

25 kg F.D or polyethylene bag in hard carton box

microscopical exam USP23,BP98 (Bitter less )

02-10-00081 Ferrous fumarate USP23,BP98


2 ton

02-10-00082 Ferrous Gluconate USP23,BP98


2 ton

02-10-00083 Ferrous sulphate dried USP23,BP98


02-10-00084 Furosemide fine powder BP98, USP 23

25-50 kg F.D or P.D

02-10-00085 Gelatine powder USP23(NF18),BP98


50 ton

02-10-00086 Glycerol redistilled anhydrous USP23, BP98

200-250 kg galvanized I.D

1,600,000 Kg

02-10-00087 Powder Acacia USP23(NF18),Bp98


2000 Kg

02-10-00088 Glibenclamide powder BP98

25-50 kg F.D or P.D

02-10-00089 Glyceryl guiacolate ( guiaphenesin ) USP23,BP98

25 kg F.D or P.D

02-10-00090 Xanthan Gum USP23(NF18)


02-10-00091 Gramicidin micronized USP23

100- 500 g alum. Tin

1.5 ton

02-10-00092 Glucose monohydrate pdr. USP23,BP98


60000 Kg

02-10-00093 Guar Gum (mypro guar ) Csaa 200 USP23(NF18)


10 kg

02-10-00094 Glucose anhydrous USP23,BP98 pyrogem free for I.V sol.

50 kg F.D or P.D multilayer paper bag lined with

200 ton

02-10-00095 Hydrochlorthiazide powder USP23,BP98


02-10-00096 Homatropine methyl bromide USP23

1 kg alum. Tin. 50 TONS

02-10-00097 Hyoscin -N- butyl bromide fine pdr. BP98

5 kg alum. Can.

02-10-00098 Ibuprofen very fine pdr., USP23,BP98

25 –50 KG F.D 2,500 Kg

02-10-00099 Isopropamide Iodide USP23

25-50 kg F.D or P.D

500 Kg

02-10-00100 Indomethacin micronized USP23,BP98

25-50 kg F.D or P.D

02-10-00101 Iso Sorbide dinitrate(Diluted) USP23,BP98 25 % in lactose

25 kg F.D or P.D

02-10-00102 Lactose monohydrate BP98+ M.L.T as USP23(NF18)


02-10-00103 Lanoline Anhydrous (wool fat) USP23,BP98


02-10-00104 L-Leucine BP98,USP23 25-50 kg F.D or P.D multilayer paper bag lined with nylon on pallet

3000 kg

02-10-00105 Lidocaine BP98,USP23 25 –50 kg F.D or P.D

100 kg

02-10-00106 Lactose spray dried BP98,USP23(NF18)+M.L.T


02-10-00107 Lanoline alcohol (wool al.) USP23(NF18),BP98


02-10-00108 Magnesium stearate ppt.


15000 Kg

Loose dinsity 0.15-0.2 gm/mlM.L.T as USP23,BP98+USP23(NF18)

5 ton

02-10-00109 Metoclopromide HCL BP98


02-10-00110 L-Menthol USP23 5-10 kg Alum. Can.

02-10-00111 Meprobamate pdr. USP23,BP98

25-50 kg F.D or P.D

10 ton

02-10-00112 Mefenamic acid BP98 25-50 kg F.D or P.D

02-10-00113 Methyl cellulose USP23,BP98


02-10-00114 Methyl paraben USP23(NF18),BP98

25-50 kg F.D or P.D

4,000 Kg

02-10-00115 Methyl Salicylate USP23(NF18),BP98

50 kg galvanized I.D or P.D

02-10-00116 Mitronidazol USP23,BP98

25-50 kg F.D or P.D

02-10-00117 Mebendazol v.f.p bitterless white pdr.odour less USP23,BP98

25 kg F.D or P.D

02-10-00118 Manganese chloride anhydrous USP23

5kg alum. Con .

02-10-00119 Mannitol (parentral use )USP23,BP98


02-10-00120 Methyl Dopa USP23,BP98

25-50 kg F.D or P.D

250 kg

02-10-00121 Neomycin sulphate USP23,BP98


5 KG

02-10-00122 Nicotinamide USP23,BP98


02-10-00123 Nitrofurantain fine powder USP23,BP98

25-50 kg F.D

02-10-00124 Naphazoline nitrate BP98

100-500 g alum. Can.

3 ton

02-10-00125 Nystatine v.f.p BP98,USP23

1 kg alum. Can. 3 TON

02-10-00126 Oil Arachis(peant oil) USP23(NF18) , BP98


02-10-00127 Oil castor USP23,BP98


3 ton

02-10-00128 Oil eucalyptus BP98 5 kg alum. Can. 10 ton

02-10-00129 Oil lavender NF16 BP80 add 2

5 kg alum. Can.

02-10-00130 Oil niaouli (cajuput oil ) french codex swiss

5 kg alum. Can.

02-10-00131 Oil orange BP98 5 kg alum. Can. 150 KG 02-10-00132 Orange soluble

flavourCFR,FDA food additive.

5 kg alum. Can. 15 ton

02-10-00133 Oil peppermint USP23(NF18),BP98


02-10-00134 Pineapple flavour CFR,FDA food additive

5 kg alum. Can.

02-10-00135 Strawberry flavour CFR,FDA food additive

5 kg alum. Can. 2,500 KG

02-10-00136 Oil turpentine BP98 5 kg alum. Can. 5 ton

02-10-00137 Tutti frutti flav. CFR,FDA food additive


02-10-00138 Oleoresin capsicum, light

5 kg alum. Can. 2 KG

Absoption of 0.5% capsicum in methanol at 444 m

10000 BIU

should on the limit of 0.3191 –0.3262 BPC73

50 TON

02-10-00139 Orphenadrine Citrate BP98,USP23


02-10-00140 Rasberry flavour CFR,FDA food additive

5 kg alum. Con. 100 kg

02-10-00141 Oxymetazolin HCL USP23

500 gm alum. Can. 25 kg

02-10-00142 Orange flavor dry (soluble pdr) CFR,FDA food additive

5 kg alum. Con. 500 kg

02-10-00143 Oil spearmint Bp98 5 kg alum. Con. 3 ton 02-10-00144 Paracetamol

USP23,BP98 V. F. P. medium

50 kg F.D or P.D or polyethlen bag in hard carton box

3 ton

diamitu 7 micro 90 % under 28 micro

1 ton

02-10-00145 Paraffin liq. (mineral oil ) tocopheryl added 10 ppm USP23,BP98


02-10-00146 Paraffin soft whit (petrolatum ) melting range 40-56�


70000 Kg

c penetration nized no. 150-200 BP98,USP23

100 KG

02-10-00147 Paraffin soft yellow melting point 40-56�c


500000 Kg

penetration no.150-200 BP98,USP23

02-10-00148 Pyrazinamide BP98,USP23


02-10-00149 phenobarbitone(phenobarptial) USP23 BP98

25-50 KG F.D or P.D

100 KG

02-10-00150 Phenyl ephrine HCL USP23,BP98

5 kg alum. Cont. 300 TON

02-10-00151 Polyethylene glycol 4000 (macrogol) USP23(NF18),BP98


02-10-00152 Polyethylene glycol 6000 USP23(NF18)


02-10-00153 Polyvinyl pyrolidone M.WT . 44000 K

25-50 kg F.D or P.D

value 30 (povdon),P.V.P BP98,USP23

02-10-00154 Potasium- chloride USP23,BP98


50 ton

02-10-00155 Propylene gloycol BP98


02-10-00156 Propylhydroxybenzoate (propylparaben) USP23(NF18),BP98

25-50 kg F.D 2,000 Kg

02-10-00157 Pyridoxin HCL USP23,BP98

25 kg F.D or alum. Sachet in hard carton box

500 kg

02-10-00158 Potasium –Phosphate monobasic USP23(NF18)

1 kg can. or mulitlayer paper bag lined with nylon on pallte

02-10-00159 Polyethylene glocol 400 USP23(NF18)


02-10-00160 Pseudoephedrine HCL USP23,BP98

25 kg F.D or P.D

02-10-00161 Promethazine HCL USP23,BP98

5 kg Alum. Can. 5 ton

02-10-00162 Pipenzolate methyl bromide pure


*Description : white cryst . pdr. With bitter test

*Solubility : soluble in water , sliighty soluble in ether &acetone*Melting point : 180-183úc

10 ton

*Loss on drying at 105úc :N.M.T. 0.5%*Identification by I.R. , assay N.L.T. 99%

500 kg

02-10-00163 Propranolol USP23,BP98

25-50 KG F.D or P.D

200 ton

02-10-00164 Ranitidine HCL USP23,BP98 white pdr

25-50 KG F.D or P.D

100 kg

02-10-00165 Riboflavine USP23,BP98

25 kg Alum. Can. Sachet in hard carton box

5 ton

02-10-00166 Riboflavine 5-Phosphate Sod. USP23, BP98


750 kg

02-10-00167 Rifampicin tapped bulk density 0.7 gm/ml USP23,BP98

25 kg alum. Can.

02-10-00168 Saccharine sodium USP23,BP98

25-50 kg F.D or P.D or multilayer papere bag lined with nylon on pallte

200 kg

02-10-00169 Sod. Benzoate BP98 DAB7 USP23(NF18)

25-50 kg F.D or P.D

4000 kg

02-10-00170 Sodium Bicarbonate BP98,USP23


100,000 Kg

02-10-00171 Sodium Carboxymethyl cellulose (carmellose sod.)


*Viscosity of 1% solution 275 c.p.s.

*P.S 99.5% passes 60 mesh B.S USP23,BP98

02-10-00172 Sodium Chloride BP98,USP23 for J.V solution


02-10-00173 Sod. Citrate USP23,BP98


25000 Kg

02-10-00174 Di. Sodium Edetate pure BP98,USP23


02-10-00175 Sod. Hydroxide pellets pure USP23(NF18),BP98

25 kg F.D or polyethylene bags lined with nylon on pallet

02-10-00176 Sod. Glycerophsphate NFX

25-50 kg F.D or P.D

02-10-00177 Sodium Metabisulphite USP23(NF18),BP98


2 ton

02-10-00178 Sodium Phosphate monbasic analytical reagent USP23

5 kg alum. Can. Or P.cont.

3 ton

02-10-00179 Sorbitol solution70% non Crystalizing grade USP23,BP98

200-250 kg galvanized I.D

02-10-00180 Spermacetti BPC68,USP23


1000 Kg.

02-10-00181 Sulphacetamide sodium BP98,USP23


02-10-00182 Sulphanilamide (streptocid) extrapure BPC68 SPX


50 ton

02-10-00183 Salbutamol sulphate Bp98

5 kg alum. Can. Or P.con

750 kg

02-10-00184 Sod. Format 1 kg Con. *Description: Crystalin pdr.odourless, saline testy*Chlorid : n.m.t 0.1 %*Sulphate : n.m.t 0.05 %

2 ton

assay : n.l.t 98 %02-10-00185 Sod. Phosphate

dibasic anhydrous buffer reagent USP23

1 kg Con.

02-10-00186 Sodium Lauryl sulphate USP23(NF18),BP98


02-10-00187 Sulphamethoxazol ( micronized) USP23,BP98


02-10-00188 Talc v.f.p USP23,BP98


02-10-00189 Theophylline anhydrous USP23,BP98


500 kg

02-10-00190 Thymol USP23(NF18),BP98


500 kg

02-10-00191 Titanium dioxide USP23,BP98


1 ton

02-10-00192 Di-X-Tocopheryl acetate oily BP98

5 kg alum. Can. 100 KG

02-10-00193 Triprolidine HCL BP98,USP23


02-10-00194 Tetracycline HCL USP23,BP98

25-50 kg F.D or P.D or aor alum. Sachet in hard carton box

20 ton

02-10-00195 Vitamin A acetate 500 000 I.U/gm powder

5 kg alum. Can. Or alum. Sachet in hard carton box

3000 Kg

appearance light yellow , fine gran pdr fineness

100% throught no.20 U.S standard sieve min 9% throught no. 40 max. 15% “ “ 100 loss on drying ( 4 hours at 105 �c)

max 8% USP23,BP9802-10-00196 Vitamin E adsorbate

33% or 50% pharmaceutical grade BP98,USP23

5 kg alum. Can. Or alum. Sachet in hard carton box

5 ton

appearance fine practicaly white pdr. L.O.D. n.m.t 5%

100 kg

(4 hours at 105�c ) E 254/E 284.5

3 ton

(ethan 01) 0.17-0.215 assay min 33% or 50%

150 kg

of Di- - tocopheryl acetate

5 kg

02-10-00197 Vanillin USP23(NF18),BP98

5 kg Can. 1.5 TON

02-10-00198 Vitamin A- palmitate 1M IU/ gm appearance : yellow ,


oily liq. May crystllize on storagePeroxide value (lea) max 10Acid value max 20UV absorption in isopropanola)mix absorption : at 325-327 mmb) ralative extinction :-at 300 nm max. 0.593

2 ton

-at 350 nm max. 0.537-at 370 nm max. 0.142Vitamin A content min. 1.OM I.U/g specify:1-dileumt oil2- antiaxidant 250 kg USP23,BP98

02-10-00199 Veegum H.V (alum. Mag. Silicate) ( viscosity st. 250 CP.

25-50 kg F.D or P.D

02-10-00200 Witapsol H35 (hard fat ) USP23(NF18),BP98

25 kg galvanized I.D or polyehyllene bag in hard carton box

02-10-00201 Witepsol H37 (hard fat ) BP98,USP23(NF18)


02-10-00202 Yeast extrat USP23 25-50 kg F.D or P.D

02-10-00203 Yellow iron oxide colour CFR, FDA colour add

25 kg F.D or P.D or multilayer paper bag in lined with nylon on pallet

02-10-00204 Zinc oxide BP98,USP23


10 ton

02-10-00205 Zinc sulphate 7H2o USP23,BP98


10 ton

02-10-00206 Ampicillin Trihydrate V.F.P. particale size 100% bellow 125 micro.


2 ton

02-10-00207 By microscopical exam. USP23,BP98

02-10-00208 Ampicillin sodium Sterile for inj. Crystalline ( ready for filling ) USP23,BP98

2-5 kg alum. Cant.

02-10-00209 Ampicillin sodium Sterile for inj lyophelizid

2-5 kg alum. Cant.

02-10-00210 Avicel pH 102 ( microcrystallin cellulose) avarage P.S. 90 micro BP98,USP23(NF18)


02-10-00211 Avicel pH 101 USP23(NF18),BP98


10 ton

02-10-00212 Aluminium Hydroxide Mag. Carbonat dride gel as attached list USP23,BP98


15.000Kg

02-10-00213 Amoxyllin tryhydrate compact bulk density .68% sieve analysis


15000 kg

When exam under microscop. USP23,BP98

02-10-00214 Amoxycillin Trihydrate compact bulk density 0.68 % sieve analysis

25-50 kg alum. Can. Or alum. Sachet in hard carton box

10 % over 900 mocro , 50 % over 400 , 90 % over 100

50000 kg

02-10-00215 Chloramphenicol palmitate micro. P.S100% bellow 100micron

25-50 kg alum.F.D or P.D or alum. Sachet in hard carton box

15000 kg

by microscopical exam USP23,BP98

02-10-00216 Creatinine chemical pure USP23


02-10-00217 Cetomacrogol ( cetamac 1000 ) BP98

25 kg F.D or P.D or polyethlene bag in lined with nylon on pallet

10 ton

02-10-00218 Calcium Carbonate heavy loos density 0.81 - 1 gm/ml tapped density


50 ton

1.25-1.5 gm/ml USP23,BP98

02-10-00219 Calcium Carbonate light fin pdr. Loose density 0.3-o.4 gm/ml Tapped


density 0.5- 0.7 gm/ml BP98

02-10-00220 Colour orange deep 2025 CFR,FDA color food add.

2.5-5 kg can.

02-10-00221 Colour deep orange alum. Lake ZLTI CFR,FDA color add.

2.5-5 kg can.

02-10-00222 Colour bannana green H8747 CFR,FDA color add.

2.5-5 kg can. 20 ton

02-10-00223 Colour erythrocin FD&C. No. 3 CFR,FDA

2.5-5 kg can. 750 kg

02-10-00224 Colour green alum. Kake ZLT601 CFR,FDA color add.

2.5-5 kg can. 1.5 TON

02-10-00225 Colour Allura Red No.40 CFR,FDA 21 colour add.

2.5-5 kg can. 5 ton

02-10-00226 Hydrocortisone acetate Mic. USP23,BP98


02-10-00227 Hydroxyethyl cellulose ( cello size )QP 300L / 1389 USP23


3000 Kg

02-10-00228 Hydroxypropyl methyl cellulose 50 CPS USP23


02-10-00229 Pridnisolone fine pdr. USP23,BP98

5 kg alum. Can. 250 kg

02-10-00230 Pridnisolone Acetate Micro. Sterile pdr. USP23.BP98

500 kg cont.

02-10-00231 Famotidine BP98,USP23


02-10-00232 Triamcinolone acetonide micro. USP23,BP98

100 GM Tin. 50 kg

02-10-00233 Trimethoprim (micronized)

25 -50 kg F.D or P.D

P.S 50% below 14 mic.80% below 27 mic. 6 ton 100% below 90 mic. 500 kg USP23,BP98 2 ton

02-10-00234 Tetracycline HCL micronized USP23,BP98

25 kg F.D or P.D or alum. Sachet in hard cartone box

02-10-00235 Trifluoperazine HCL USP23,BP98

5 kg Cont. 300 kg

02-10-00236 Diclofenac sod. Bromine pdr. For amp.

1-5 kg cont. 1.5 TON

02-10-00237 sildinafil citsate

02-10-00238 Cipraflaxacin Hcl Bp 98

1,500 Kg

02-10-00239 Finstride 30 Kg02-10-00240 Naporaxin usp 23

FDA APP , BP 98 02-10-00241 Metferemin HCL 10000 Kg02-10-00242 Naphazoline HCL

USP 23 02-10-00243 Cefaclor compacted

USP 23 02-10-00244 Impramin HCL BP

98 35 Kg

02-10-00245 Warfarin sodium BP 98

02-10-00246 Calcium Gluconate BP 98

02-10-00247 Framycetin Sulphate BP 98

02-10-00248 Cinchocain HCL SUP 23

02-10-00249 Benzhexol HCL BP 98

02-10-00250 Clomiphene citrate BP 98 USP 23

02-10-00251 Miconazole nitrate USP 23

5 Kg

02-10-00252 Timolol maleate BP 98

02-10-00253 Mepyramine Maleate BP 98

02-10-00254 Phenylpropanolamine HCL BP 98

02-10-00255 Methyl Ergonovine maleate

1 Kg

02-10-00256 Clindamycin HCL USP 23

02-10-00257 Pilocarpin HCL BP 98

6 Kg

02-10-00258 Ampicillin sod+ ( cloxacillin sod. ) sterile

02-10-00259 Dexchlorpheniramine maleate BP 98

02-10-00260 Calcium saccharate usp 23

02-10-00261 Sodium starch glycolate BP 98

250 Kg

02-10-00262 Haloperidol BP 98,USP 23

1 Kg

02-10-00263 DISOPYRAMID PHOSPHATE BP98,23

02-10-00264 Verapamil HCL BP9802-10-00265 PRIFINIUM PROMIDE 02-10-00266 LOPERAMIDE HCL

BP98,USP2302-10-00267 LIGNOCAIN HCL BP 98 1 Kg

02-10-00268 DOMPERIDONE MALEATE BP 98,USP 23

1 Kg

02-10-00269 CLEMASTINE FUMARATE BP 98USP23

02-10-00270 MICONAZOLE BP98 ,USP23

02-10-00271 NIFEDIPINE BP9802-10-00272 OMEPRAZOLE BP 9802-10-00273 SODIUM VALPROATE

BP98

02-10-00274 THYROXIN SODIUM BP 98

02-10-00275 GLYCERYL TRINITRAE

02-10-00276 PROCYCLIDINE HCL BP98

02-10-00277 Timolol maleate BP 98

02-10-00278 Pilocarpin HCL BP 98

02-10-00279 DIMETHINDENE MALEATE

02-10-00280 LACTULOSE CRYSTALS 02-10-00281 ANTAZOLINE HCL BP98

02-10-00282 Salbutamol sulphate BP 2000

02-10-00283 Oleic acid BP 2000

02-10-00284 Dymel 134a/ p pharmaceutical grade HFC - 1349 propellant (specific for inhailav)

02-10-00285 Beclomethason Dipropionate BP2000

50 Kg

02-10-00286 Eudrajit RL 100 02-10-00287 Eudrajit RS100 02-10-00288 Triiethyl citrate

liq 02-10-00289 Sodium starch

Glycollate ( Type B) BP93

02-10-00290 Tinidazol PB98 02-10-00291 Di- iodo hydroxy

quinoline USP 2302-10-00292 Simethicone USP 23

02-10-00293 Prochlorperazine maleat PB98, USP233

02-10-00294 Halazone USP 2302-10-00295 Econazole Nitrate

PB98 , USP 233 02-10-00296 Meloxicam 02-10-00297 Dimethindene maleate

02-10-00298 Sucralfate USP 23 02-10-00299 Cefixime PB 98 ,

USP23302-10-00300 Carfecillin Sodium

02-10-00301 Pefloxacin Mesylate

02-10-00302 Diltiazem HCL PB 98

02-10-00303 Methionine PB98, USP 233

02-10-00304 Midazolam PB98 02-10-00305 Nigahatrin 02-10-00306 Ketorolac 02-10-00307 Hirudin 02-10-00308 Bumetanide PB98 ,USP

23302-10-00309 flumazenil 02-10-00310 protamine Sulfate

PB98 , USP 23302-10-00311 Ambroxol

hydrochloride 02-10-00312 N- acetyl cysteine

PB98, USP23302-10-00313 Vaso pressin USP 23

02-10-00314 Magnesium hydroxide PB 98, USP 233

02-10-00315 Bupivacaine HCL PB98 , USP233

02-10-00316 low Density polyethylen Grades :- BASF / 2425K ALCODTA/ 063 CODTI / 4050

02-10-00317 DOW CHEMICALS / 5585 Epurpose: for injection molding of cap,screw caps and flat discof baby feeding bottles.

medium viscosity improved mold release grade to be manfuctured in compliance with food additive regulations

goverening poly carbonate resins for food contact applications=21CFR,177,1580and 21 CFR 010,2010

purpose: to produce baby bottles

liquid silicone rubber

02-10-00318 Grades :- SILASTIO 595 HC A+B

according to the latest pharmacapea and its supplements

02-10-00319 purpose: to produce teats of baby feeding bottles

according to the latest pharmacapea and its supplements according to the latest pharmacapea and its supplements

02-10-00320 Cinarizin according to the latest pharmacapea and its supplements

250 Kg

02-10-00321 sena leaf according to the latest pharmacapea and its supplements

02-10-00322 Mebeverin HCL according to the latest pharmacapea and its supplements

02-10-00323 Aminophylline according to the latest pharmacapea and its supplements

02-10-00324 Terbutatin according to the latest pharmacapea and its supplements

10 Kg

02-10-00325 Loratidin 25kg F.D OR PD

02-10-00326 Calrithromycin according to the latest pharmacapea and its supplements

02-10-00327 Lisino pril according to the latest pharmacapea and its supplements

100 kg

02-10-00328 Magnesium sulphate BP 98,usp 24

25 kg F.D

02-10-00329 Pyroxicam according to the latest pharmacapea and its supplements

150 kg

02-10-00330 Silvir sulphadiazin 1000 kg

02-10-00331 Bisacodyl fine powder BP 98,usp 24


3,500 Kg

02-10-00332 povidon lodin according to the latest pharmacapea and its supplements

4000 kg

02-10-00333 Deotran 70% medical grade BP98

1-5 kg al . Can

02-10-00334 Pot.citrate 100-500gm al.can 3000 Kg

02-10-00335 Carbowax 1500 2.5 -5 kg can 50 kg 02-10-00336 Antazolin HCL

BP 98100-200gm alumin or glass can

02-10-00337 Clotrimazol micronized usp 24

(2.5 -5 kg) can 50 kg

02-10-00338 Colour yellow NO.6 CER,FDA color additires

(25-50 f.d ) P.D

02-10-00339 Hydroxy cobolamin BP98, USP 24


02-10-00340 colour red NO347 CER,FDA


02-10-00341 Ephedrin HCL usp 24, BP98

2000 Kg

02-10-00342 10dochlorohydroxy quinolin BP98,usp24

25 kg.F.D or P.D

02-10-00343 Metformin HCL according to the latest pharmacapea and its supplements

02-10-00344 Piprazin citrate BP98,USP24

02-10-00345 Opa dry green 5832 ( specific )

02-10-00346 Colour brown FK 53

machinery 02-10-00347 Spare parts for

cartoning Machine HF77

ITEM1. Sprocket wheel for carton

Serial NO.C-640 - SHF 77 -8 CAM

Transport chain

( HS-7.14 , Z= 48X 1/2 INCH) ITEM2. Sprocket wheel for carton

Transport chain

( HS-7.6 , Z= 48X 1/2 INCH) Carton Transport chain complete

02-10-00348 Spare parts for fitzmill Machine

ITEM 1. Part NO 24045 Type 225 blades

02-10-00349 S.N : 23X173 , 13X171

ITEM 2. Part NO 24043 blade pins for 24045

02-10-00350 ITEM3. Part NO 24269 complete set of Tools

02-10-00351 ITEM4 Part NO 24115 N.M.D.j.30 Bearings

02-10-00352 ITEM5Part NO 24168 1 3/16 INCH diameter lock washers


02-10-00354 ITEM7Part NO 24116 Oil seal 1 7 /16 INCH diameter .

02-10-00355 ITEM8Part NO 24117 Oil seal 1 1/ 16 INCH diameter .

02-10-00356 ITEM9Part NO 24176 Dust retainer . 37 x 65 x 20 ( HNCH) long

02-10-00357 ITEM10Part NO 24118 1/2 INCH vee Belts .53 inside longth

02-10-00358 ITEM11Part NO 24119 1/2 HNCH vee Belts .49 inside longth

02-10-00359 ITEM12Part NO 24120 1/2 INCH vee Belts .44inside longth

02-10-00360 ITEM13Part NO 24183 3/32 ( HNCH) screen Type (A)



02-10-00363 ITEM16Part NO 24240 10S Mesh screen Type (c)




02-10-00367 ITEM20Part NO 24018 Motor slide Rod Bracket

02-10-00368 ITEM21Part NO 24019 Motor screw Bracket

02-10-00369 ITEM22Part NO 24020 Motor Bracket

02-10-00370 ITEM23Part NO 24166 adjusting washer fixed endcap

02-10-00371 ITEM24Part NO 24167adjusting washer floating endcap



02-10-00374 spare parts for M80 Blister Machine CAMS.N : s06.037 , s06.042 , s06.043

02-10-00375 ITEM 1 Pneumatic Cylinder UC2 32x20 farolfi for first pincer

02-10-00376 ITEM 2 First pincer

02-10-00377 ITEM 3 Pneumatic cylinder UC2 40X35 farolfi for per-heating

02-10-00378 ITEM 4 Vacuum pump completed with motor

02-10-00379 ITEM5 Oil seal for above pump

02-10-00380 ITEM6 VACUUM BLADES for above pump

02-10-00381 ITEM 7 Main drive V-Belt S301/4-57

02-10-00382 ITEM8 Filter housing complete for vacuum pump

02-10-00383 ITEM9 Filter cartridges for above

02-10-00384 ITEM10 small screw , washers , nut ,…etc of the whole machine

02-10-00385 ITEM11 Water cooling unit assembly

02-10-00386 ITEM12 Water pump completed

02-10-00387 ITEM 13 Mechanical seal assembly for above pump

02-10-00388 ITEM14 Refrigeration compresser for above cooling unit

02-10-00389 ITEM15 Oil seal + oring for hydraulic cylinder (fig N,N.6 )

02-10-00390 ITEM16 The pincer ( fig P,N.1)

02-10-00391 ITEM 17 Gear box for main drive machine

02-10-00392 ITEM18 pulleg for above gearbox

02-10-00393 ITEM19 Ref .no. 500125010 caps springs in forming station O40-10,2-0,9

02-10-00394 ITEM20 Ref .no.400016252 springs in forming / sealing station

02-10-00395 ITEM21 Ref .no.400015923 springs for alafoil brake

02-10-00396 ITEM22 Ref .no.400012068 springs for idle pincer

02-10-00397 ITEM23 Ref .no.400015533 compensating roller return springs

02-10-00398 ITEM24 Ref .no. bearing NO. NUTR 4090

02-10-00399 ITEM25 Ref .no. bearing NO. NUTR 2562

02-10-00400 ITEM26Ref .no.400016178 Exit pincer springs ( drawing area )

02-10-00401 ITEM27Ref .no.400040088 stabilizer springs

02-10-00402 ITEM28Ref .no.400016633 De- vacuum valve springs

02-10-00403 ITEM29Ref .no.506065007 kit gaskets for RADIUSE 22 sealing oil cylinder

02-10-00404 ITEM30Ref .no.506065009 kit gaskets for RADIUSE 32 pincers cylinder

02-10-00405 ITEM31Ref .no.506065082 kit gaskets forRADIUSE40 per-heating cylinder

02-10-00406 ITEM32Ref .no.506065081 kit gaskets forRADIUSE63 per-punches cylinder

02-10-00407 ITEM33Ref .no.506065080 kit gaskets for RADIUSE50 compensqtor cylinder

02-10-00408 ITEM34Ref .no.506050091 OR gaskets for hood seal

02-10-00409 ITEM35Ref .no.506060095 OR gaskets for Matrix

02-10-00410 ITEM36Ref .no.506060027 OR gaskets for Matrix

02-10-00411 ITEM37Ref .no.000000011 long conveyor belt XASB 30 type Tir 27

02-10-00412 ITEM38Ref .no.506045013 Bronze muffler 3/8 INCH

02-10-00413 ITEM39Ref .no.506035004 Regulator 1/8 INCH RADIUSE 6

02-10-00414 ITEM40Ref .no.500040149 Nyliner bushes 16L 16 F

02-10-00415 ITEM41Ref .no.506010046 Solenoid valve for per-heating G50V24 AC

02-10-00416 ITEM42Ref .no.000000012 DIFFERENT HOSES

02-10-00417 ITEM43Ref .no.000000013 Pneumatic selector ( Dordoni )

02-10-00418 ITEM44Ref .no.506085000 Hose for closure cylinder

02-10-00419 ITEM45Ref .no. motor , gearboX & chain for cutter blister ( fig . R)

02-10-00420 ITEM46Ref .no. gearbox, chains & sprocket wheel ( fig . R)

PESCRIPTION PESCRIPTION

SPARES PART FOR 35 STATION DRTM + ABLET COM PRESSION MACHINE

SPARES PART FOR 35 STATION DRTM + ABLET COM PRESSION MACHINE

02-10-00421 PART. NO NAME QUANT. PART. NO

02-10-00422 MJ - 1 UPPER CAM PLATE 8 M3 - 1

02-10-00423 MJ -2 TAKE OUT PLATE 16 M3 -2

02-10-00424 BJ - 6 LOWERING CAM 12 B3 - 6

02-10-00425 BJ - 7 LIFTING CAM 16 B3 - 7

02-10-00426 M9 , M10 ,M11 R.H, L.H REAR FRICTION PLATE

6 set M9 , M10 ,M11

02-10-00427 BF- 16 LOWER TRACK 12 BF- 16

02-10-00428 BC - 3 LOWER ROLL 8 BC - 3

02-10-00429 BC - 4 LOWER ROLL BUSH 16 BC - 4

02-10-00430 D21 FOR BM UPPER PRESSURE ROLL

8 D21 FOR BM

02-10-00431 D22- FOR BM UPPER PRESSURE ROLL BUSH

16 D22- FOR BM

02-10-00432 BC- 11 PUESSURE WHEEL 8 BC- 11

02-10-00433 BF- 4 DOZZER 8 BF- 4

02-10-00434 BH FEED FRAME 12 BH

02-10-00435 ROTARY PUMP 4

02-10-00436 ME - 7 GEAR BOX 4 ME - 7

02-10-00437 ME- 6 GEAR BOX EXTENTION

4 ME- 6

02-10-00438 ME - 9/ A FLANGE FOR ELECRO MAGNETIC CLUCH

4 ME - 91 A

02-10-00439 MK 27 FRONTDUST COVER AT UPPER PUNCH

4 MK 27

02-10-00440 MK 27 / 1 REAR DUST COVER AT UPPER PUNCH

4 MK 27 / 1

02-10-00441 ME- 14/A FOR BM WORM SHAFT 4 ME- 14/A FOR BM

DESCRIPTION

BPARES PART FOR 27 STATION DRTM TALAET

COMPRESSION MACHINE

PART. NO NAME QUANT PART. NO

02-10-00442 MJ - 1 UPPER CAM PLATE 4 MG - 1

02-10-00443 MJ- 2 TAKE OUT PLATE 8 MG- 2

02-10-00444 BJ- 6 LOWERING CAM 6 B3- 6

02-10-00445 BJ - 7 LIFTING CAM 8 B3 - 7

02-10-00446 M9 , M10 ,M11 R.H, L.H REAR FRICTION PLATE

3 SET M9 , M10 ,M11

02-10-00447 BF - 16 LOWER TRACK 16 BF - 16

02-10-00448 BC - 3 LOWER ROLL 4 BC - 3

02-10-00449 BC - 4 LOWER ROLL BUSH 8 BC - 4

02-10-00450 D21 FOR BM UPPER PRESSURE ROLL

4 D21 FOR BM

02-10-00451 D22 FOR BM UPPER PRESSURE ROLL BUSH

8 D22 FOR BM

02-10-00452 BC- 11 PRESSURE WHEEL 4 BC- 11

02-10-00453 BF - 4 DOZZER 4 BF - 4

02-10-00454 BH FEED FRAME 8 BH

02-10-00455 ROTARY PUMP 2

02-10-00456 ME - 7 GEAR BOX 2 ME - 7

02-10-00457 ME - 6 GEAR BOX EXTENTION

2 ME - 6

02-10-00458 ME- 9 / A FLANGE FOR ELECTRO MAGNETIC CLUCH

2 ME- 9 / A

02-10-00459 MK 27 FRONT DUST COVER AT UPPER PUNCH

2 MK 27

02-10-00460 MK 27 / 1 REAR DUST COVER AT UPPER PUNCH

2 MK 27 / 1

02-10-00461 ME 14/ A FOR BM WORM SHAFT 2 ME 14/ A FOR BM

02-10-00462 Latex examination clover Non sterile sizemedwm/Large

200 000 pairs

Latex examination clover sterile sizemedwm/Large

100 000 pairs

02-10-00463 Disposable surgeons mask

500 000 pcs

02-10-00464 Disposable surgeons Hair cover

500 000 pcs

spare parts & machine

spare parts for powder filling machine 3 EMME type DZ1/2mf Ref 9249

item 02-10-00465 clutches NEB 0603210

02-10-00466 group NEB 0610607 02-10-00467 Timer PDX C3524 v AC

02-10-00468 senser S118C5 NPN VC

02-10-00469 Micro switches Xe NP102

02-10-00470 Timer CM 50T/4 CAM PACKAGEING SYSTEM cartoning machine COMPANY NAME :CAM (BLOGNA-ITALY) SERIAL NO. : C.640 SHF 77.6

item 02-10-00471 1)Rectangular

suckers 02-10-00472 2)Carton magazine

suckers02-10-00473 3)Carton magazine

suckers02-10-00474 4)Carton magazine

suckers 02-10-00475 5) Carton magazine

suckers

SPEAR PARTS FOR CAM-PACKAGING MACHINE

SMASH COMPACT/S BOLOGNA- ITALY NR-MATRICOLA 1CX21409 MACHINE SERIAL : C640 SHF 77.9

item 02-10-00476 Rectangular suckers

02-10-00477 Carton magazine suckers

02-10-00478 Carton magazine suckers

SPARE PARTS FOR CARMICHAEL LINE(SYRUP)/FILLING AND CAPPING MACHINE

CORBY , NORTHAM PTONSHIRE NN172 DT MACHINE TYPE :L112

SERIAL NO. :L112-129 M.D: 1989

item 02-10-00479 Spherical joint

PHS1602-10-00480 Belt Lo75-42002-10-00481 Roller bearing

NA17291602-10-00482 Roller bearing AB 9-

1310 P02-10-00483 U218150 gaskets 02-10-00484 Thread roller set

complete with bush, spring and roller housing for BECA head

02-10-00485 Thrust bearing India 9mm,outdia 17mm,thickness 4.3 mm

02-10-00486 Thrust bearing India 7mm,outdia 15mm,thickness 6mm

02-10-00487 Star wheel Infeed (plastic disk for bottle 125ml)

02-10-00488 Star wheel outlet (plastic disk for bottle)

02-10-00489 Complete capping head

02-10-00490 Curved entry & excited guide

02-10-00491 Infeed conveyer screw

02-10-00492 Complete cap vibrator with cap track

02-10-00493 sliding piston SPARE PARTS FOR ACEA LABILLING MACHINE

corby,northam ptonshire NN172 DT serial No. 727 model : 12T/S1/E1 M.D: 1989

item 02-10-00494 roll bearing NK4030

A02-10-00495 infeed scroll02-10-00496 body pallet for

bottle 125 ml02-10-00497 set sponges (roller

of etangalar)

02-10-00498 ink roller02-10-00499 air reduction

filler/lubricator unit

02-10-00500 upper disk02-10-00501 lower disk 02-10-00502 rubber glue roller02-10-00503 brush

SPEAR PARTS FOR CHILLERS “ Trane “ 88190 Golbey FRANCE ECVGB 080Kalteanalge Baujahr 1986Type ECVGB 080Fabrik number E83689Kalteistuny 2785 KWKalte mittel R12Fullge wicht 750 KGZULASSIYER BETRIEB SUBER DRUCK ND/HD / 10.5 bar ORDER No. 17F 719MODEL No. ECVGB 080 M1 MBGTH2SAEH2SAD1336E 31000000 A1DSerial No. E83689 COMP ECVGB080 E1AGTTB

item

COMPLETELY COMPRESSOR AND MOTOR PACKAGE

02-10-00504 Over all kit repear

02-10-00505 Actuator PST-007E02-10-00506 Oil pressure control

CNT 033E02-10-00507 Capacity control

module PNL 341E replaced by MOD - 0012

02-10-00508 Heating element HTR 439

02-10-00509 Printed circuit board BAS 046E

02-10-00510 Motor oil pump Mot 1313

02-10-00511 Thermo regulator PLN 8860 replaced by MOD – 0012

02-10-00512 Oil pump PMP-46802-10-00513 Bracket BRK-046E 02-10-00514 Lever LEV-001e02-10-00515 Adapter ADP-002E02-10-00516 Adapter ADP-003E02-10-00517 Oil pump timer-1min

TRM 015E02-10-00518 Fuse 125A for

chilled water pump 02-10-00519 Chilled water pump

KSB Etanorm G100-250GI-2900 r.p.m

02-10-00520 Motor for chilled water pump schorch Type KA3250M-AB011053 S1 55KW 380 V 100 A 50 Hz 2965 rpm

02-10-00521 Complete starter siemens for chilled water motor 3NP 5060-0E-66-110bis 380 V

02-10-00522 Thermostat type (A19 ABC-9104)250V

02-10-00523 Solid state motor protection CH-C835AG4 SER.B1

02-10-00524 Stator stat RLY 128E

02-10-00525 Timer 30min TMR 014E

02-10-00526 Relay 110 V RLY 129E

02-10-00527 High pressure control CNT 063E

02-10-00528 Low pressure control CNT 015E

02-10-00529 Circuit breaker RLY 130E

02-10-00530 Indicating light LIT 015E

02-10-00531 Oil pressure gouge GAG 024E

02-10-00532 High pressure gauge GAG 023E

02-10-00533 Low pressure gauge GAG 017E

02-10-00534 “O” Ring GKT 120E02-10-00535 “O” Ring GKT 119E 02-10-00536 Complete high

tension circuit breaker(starter) 6.6 KV

02-10-00537 SIGHT GLASS GLS011E

SPARE PARTS FOR hermetic centrifugal chiller

model 19 dk 71314 cn , comprpssor size 19 dh 310027

02-10-00538 MOTOR AND COMPRESSOR BACKAGE

02-10-00539 LABYRINTH ASSEMBLY 19DH…31…102…

02-10-00540 LABYRINTH ASSEMBLY 19DG…31…164

02-10-00541 IMPELLER SPACER 19…D…31…130102-10-00542 IMPELLER KEY 19DH…312…103202-10-00543 IMPELLER SHIM 19..D…31…155102-10-00544 STSTIC SEAL KK…73GV..02502-10-00545 "O" RING KK…71EP..07202-10-00546 "O" RING KK…71EM..00602-10-00547 "V" BAND COUPLING CT…28MM…38802-10-00548 "O" RING KK…71ER…37102-10-00549 "V" BAND COUPLING CT…28MM…20402-10-00550 "O" RING KK…71GX…19302-10-00551 "V" BAND COUPLING CT…28MM…27802-10-00552 "O" RING KK…71GX…26302-10-00553 "V" BAND COUPLING CT…28MM…20402-10-00554 "O" RING KK…71GX…19302-10-00555 SIGHT GLASS 17..Q…6…1222

02-10-00556 THRUST SENSOR ASSEMBLY

19DA…11…112

02-10-00557 FLANGE AND NOZZLE ASSEMBLY

19DG…212…112

02-10-00558 SPRAY HEADER ASSEMBLY

19DH…15…143

02-10-00559 REAR MOTOR BEARING 19DH…11…110402-10-00560 "O" RING KK…71GZ…02502-10-00561 NOSE PIECE 19..D…31…100202-10-00562 LOCKWASHER 19..D..31…218102-10-00563 LOKING PIN 19..D..31…219102-10-00564 SET SCREW 1/4INCH -

28 *3/8INCH LG.,1/4INCH -28 *5/8INCH LG

AE…54FR…167

02-10-00565 temperature gauge KM…14BC…22202-10-00566 sight glass cover 17DA…81…182202-10-00567 sight glass gasket KM…39BT…021

02-10-00568 sight glass KM…39BT…03102-10-00569 demistor assembly 19..D…11…44202-10-00570 demistor gasket 19DH..11…114602-10-00571 ejector 17EA..013…157202-10-00572 strainer KH…11NG…07002-10-00573 heater box 19DA…11…133202-10-00574 "o" ring KK…71GX…02002-10-00575 pilot light HY…19DA…02402-10-00576 temprature switch HH..16NA…01902-10-00577 ring terminal HY…94TW…33002-10-00578 thermostat terminal HY…85FP…031

02-10-00579 oil heater HT…32ZZ…12102-10-00580 acces opening gasket 19DH…31…1126

GUIDE VANE AND BLADE RING

02-10-00581 blade ring assembly consisting of items 2 thru 9

19DA…31…143

02-10-00582 drive pulley 19..D..21…206302-10-00583 cable assembly 19..D..31…19202-10-00584 bushing KT…53XL…05502-10-00585 pin package

includes: 9 pins; 18 washer; 18 cotter pins

19DA…21….001

COMPRESSOR TRANSMISON ASEMBLY

02-10-00586 bearing asembly 19..D…31….24402-10-00587 bearing assembly 50

hz19..D…31….464

02-10-00588 pinion package 50 hz 19DA.…31…181

02-10-00589 pinion key 19..D…31…1411

02-10-00590 locknut KT..89ZZ…42019 DH 11 THRUST BEARING AND SHAFT ASSEMBLY PACKAGE

02-10-00591 thrust bearing and shaft assembly package

19DH..13…161

19 DH 31 THRUST BEARING AND SHADT ASSEMBLY PACKAGE

02-10-00592 thrust bearing and shaft assembly package

19DH…33…161

LUBRICATION PACKAGE (OIL PUMP ASSEMBLY)

02-10-00593 PUMP AND MOTOR PACKAGE 220-415V;50HZ

19..D…36…841

PURGE ASSEMBLY02-10-00594 PURGE ASSEMBLY 19DG…12…908

CONTROL PANEL02-10-00595 RELAY MODULE

ASSEMBLY 32M..660…004

SPEAR PARTS FOR CARTING HF77 SERIAL NO. C-640-SHF 77-8

item 02-10-00596 Sprocket wheels for

carton transport chain (HS-7.14 Z=48x ½ inch )

02-10-00597 Sprocket wheel for carton transport chain (HS-7.6 Z=48x ½ inch)

02-10-00598 Carton transport chain complete

02-10-00599 Arrow switch B527202-10-00600 Arrow key switch

B7716,B5273x302-10-00601 Door limit switch

B6584 type 2-15GQ 22

02-10-00602 Limit switch type B0726 B2-2RQ77

02-10-00603 Door motor 240v, 50hz. B13574

02-10-00604 Vacuum switch (10-30”HG) B4799

02-10-00605 Vacuum switch (10-15”HG) B4651

02-10-00606 Ledex rotary switch B4296

02-10-00607 Diode b661902-10-00608 E-type temp. switch

30-100oc B6646

Aluminum over printing machine automatic printing machine on aluminum rool sheet width 300 mm and

variable speed up to5000 m/hr. to feed the ink automatic to the ink rool.

02-10-00609 *automatic ink drying unit sfter printing.

02-10-00610 *all part with contact to aluminum rool to be St.-St.

02-10-00611 *the stamping procedure to be done by metal chaigable rooll .*all accessories needed to put the machine in operating.*spare part for two years (list of spare part to mentioned ) .*single printing colour machine *double printing colour machine .coating pan electricaly heated complete trailitional St.-Steel 316 coating pan size 40" finished WT capacity 120 kg with inteval

bevels and all necessary accessories to put the machine in operation ,

02-10-00612 any recommended option allspare parts for two years (list to be attached)

Naenau factory 02-10-00613 WATER BATH.

SINGLE PLACE CIRCULAR,220 MM DIAMETER X 115MM DEEP WITHTWO HEAR RESISTING PLASTIC HANDLEN AND SET OFALUMINIUM RIGS.

ATTEST NO. 1262, 1262P.BIOLOGICAL INDICATOR FOR STEAM STERILIZATION MONITORING

02-10-00614 FREQUENCY RESISTANCE DATA FOR ATTEST FOR STEAM

STERILIZATION.121 C. MORE TIME 15 MIN.

02-10-00615 132 C. MORE TIME 3 MIN.

SOUDOGAZ T 206BUTANE - 190 G.

02-10-00616 Tree-cage animal unit for rabbits comprising aglavanizet iron rack with automatic feeder and

plastic drink king bottle fitted in the door

02-10-00617 Dimension of each cage .500 x 600 x 400 mm

02-10-00618 Gas burner , bunsen , for coal gas .

02-10-00619 Air partical counter consist direct readout of particle size pinter working range with respect partical for 0.5 and 5 mm

02-10-00620 High preasure liquid HP/C Acomplete and modular system of monitors , pump , controller and accessories

02-10-00621 Glass drying oven with forced air circulation for fresh and recircuted air drying temperature abt. 105 c drying

02-10-00622 time 20 to 30 minutes

02-10-00623 Laboratary glass ware washing machine automatic.with 3 rotating spray arms and 2 level washing chamber .

02-10-00624 Plastic welding appara tus foot- operated

02-10-00625 Refrigerated mcubators growth incubater , with heat insulated glass window

02-10-00626 Temp range 0-50 c

02-10-00627 Rabbit cage for testing

02-10-00628 Aspirater bottles tena glass duran capcity 20 litter

02-10-00629 Stainless steel sponge tray for disinfecting shoe - bottom and stripper bripper bottom ( sole)

02-10-00630 Dispossable syring sterilised with out needle size 20 ml .

02-10-00631 Dispossable syring sterilised with out needle size 10 ml .

02-10-00632 Dispossable needle steriliZed size19G

Dispossable needle steriliZed size23G

Dispossable sterilized petridish of clear polystrene with vents complete top dish

diameter 90 mm height 15 mm

SPARE PARTS FOR WELDING MACHINE TYPE Z3BS40supplier : thimonnier S.A tel : (7) 883.55.55

description

02-10-00633 Oscillator tube BR1196

02-10-00634 piston type CPUD-N-32-10-x, ser. No. 87-8256

02-10-00635 piston type CPUD-T-50-165, PF-PM

02-10-00636 piston type CPUD-T-50-130 DPA-12, ser no 88/8687

02-10-00637 piston type CPUD-T-50-325

02-10-00638 base plat L=80.7 cm,width =60.7 cm , thickness= 2 mm

02-10-00639 welding electrodes size 500 ml

02-10-00640 Scrapper holder 02-10-00641 Double -balaancing

holder for scrapper complate with shaft

02-10-00642 Braake for serigraphy machine

02-10-00643 Rubber roller for pulling P.V.c

02-10-00644 scrapper rubber for printing machine

SPARE FOR TUBE WELDING MACHINE Type :M2 –B4 –1Supplier : VIFOR Manufacturer :Thimomer

02-10-00645 Oscillator tube T- 130/1

02-10-00646 Foot switch type 358-945 maxpreslobar

02-10-00647 Air regulator type RFU483 CAMOZZI

02-10-00648 Piston type stroke 02-10-00649 Micro swich 5A250V-

8310102-10-00650 Timer MN2 for

changing polarity type SAIA

02-10-00651 Timer MNI for welding type SAIA

02-10-00652 Electrode (top &Bottom )

02-10-00653 Needle

02-10-00654 Holder from Brass forb needle

02-10-00655 Contractor K3 type CMC MR3 / 56A

SPARE PART FOR BAG WASHING MACHINE TYPE: pharmpack – RIB16H-NR 200SUPPLIER :VIFORManufacturer : pharmapac- Germany

02-10-00656 Motor with gearbox complete

02-10-00657 Carrier disk NO- 18

02-10-00658 DISTRIBUTOR DISK NO –17

02-10-00659 DISK CAM NO- 16

02-10-00660 FLANGE bearing NO – 15

02-10-00661 Supporting ring , top – 51

02-10-00662 Supporting ring bottom 52

02-10-00663 Piston NO- 47

02-10-00664 CASING NO – 46

02-10-00665 CASING NO – 44

02-10-00666 Piston NO –43

02-10-00667 DISTRIBUTOR – CASING NO – 45

02-10-00668 CASING NO – 40

02-10-00669 PISTON NO- 39

02-10-00670 PISTON NO – 38

02-10-00671 PUMP NO – 35

02-10-00672 Solenoid valve NO –61

02-10-00673 Corner valve NO – 62

02-10-00674 FILTER CASING NO –5g

02-10-00675 Flange NO – 20

02-10-00676 Covering disk NO 21

02-10-00677 Arton No- 22

SPARE FOR STOPPERS WASHING MACHINESTYPE : STRUNCK RAND A01 , MACHINE NO – 6181008402 – COM11015119SUPPLIR : VIFOR MANUFACTURER : STRUNCK-GERMANY

sheet No. Order No. Joint 2 2

02-10-00678 Distributor head 2 3

02-10-00679 Distributor 2 4

02-10-00680 Joint 2 5

02-10-00681 Distributor plate 2 6

02-10-00682 Shaft 2 7

02-10-00683 Bearing Disc 2 10

02-10-00684 Cup spring 2 21

02-10-00685 Disk 3 22

02-10-00686 Carrier disk 3 27

02-10-00687 Counter disk 3 28

02-10-00688 Spouting tubes 1 35

02-10-00689 a- shower tubes 8 36

02-10-00690 b- screw socket 8 37

02-10-00691 c- injection nozzle 6 42

02-10-00692 d- splash protection 5 20

02-10-00693 e- splash hood 1 51

02-10-00694 f- filter complete 9 53

02-10-00695 g- filter inset 10 60

02-10-00696 h- filter holder complete type : yy 22 142-30 I- spare part for filter Type : yy22 - 142- 20

02-10-00697 1- hand wheel nut , yy22 14257

02-10-00698 2- connector yy22 142 60

02-10-00699 3- vent relief valve yy30 293 66

02-10-00700 4- o- ring teflon yy22 142 53

02-10-00701 5- enlet flow deflector yy 22 142 05

02-10-00702 6- filter support screen yy40 142 64

02-10-00703 7- hand wheel stud yy22 142 70

SPARE PART FOR SUPER STILL MASCRINI TYPE : FA500 HRSUPPLIER : VIFORMANUFACTURER : STILMAS

Sheet No.

02-10-00704 Floating switch (ie4) sheet 1 -of 1

02-10-00705 Feed water solenoid valve (isi) sheet 1- of 1

02-10-00706 Solenoid valve for heating steam (3si) sheet 1 -of 1

02-10-00707 Steam solenoid for automatic Service (4s1) sheet 1- of 1

02-10-00708 Soty concentrated discharge Electro pump (6M1) sheet 1- of 1

02-10-00709 Distilled water Electro pump (7m2) sheet 1- of 1

02-10-00710 Floating switch (9e3) sheet 1- of 1

02-10-00711 Floating switch (distilled water )7e4 sheet 1- of 1

02-10-00712 Heat exchanger (3) sheet 1- of 1

02-10-00713 Heat exchanger (salty concentrate)3/1 sheet 1- of 1

02-10-00714 Level water indicating glass sheet 1- of 1

02-10-00715 Adjusting cock for running operation 70-71-72 sheet 1- of 1

02-10-00716 Manometer (12) sheet 1- of 1

02-10-00717 Steam trap (15) sheet 1- of 1

02-10-00718 Bearings Nu 2210 for compressor125 FA 350

02-10-00719 Ball bearing 22210 CJ for compressor125 FA 350

02-10-00720 Packing for compressor125 FA 350

02-10-00721 Sealring for compressor125 FA 350

02-10-00722 BroZe compressor complet type : 125 fA350 NO- 7998 R.P.M 890

02-10-00723 Conductivity meter type MRP 20 LC

02-10-00724 Cell Type M 9 / 4 SPARE PART FOR VOLVMENTRIC FILING UNIT TYPE :VIFOR SUPPLIER :VIFOR

sheet No.

02-10-00725 P.C. board for main supply TL3220-211 DIESSEL 009-02-82-011-000

02-10-00726 Setting and adjusting element P.C. board TL 3220-209 –DIESSEl 008-02-82-402-000

02-10-00727 Really P.C.board TL-3220-210 008-02-82-403-000

02-10-00728 Maine fuse NO .(9) 008-06-82-002-000

02-10-00729 Valve fuse NO.(10) 008-06-82-002-000

02-10-00730 Cable for pick-up system NO.-12 008-06-82-002-000

02-10-00731 Pck-up probe 02-10-00732 Cable for main

connection power02-10-00733 Cable for stop key02-10-00734 Emergency stop key

02-10-00735 Solenoid valves ( st. st) complete with coil 24 V a .c

SPARE PART FOR CYLINDRICAL AUTOCLAVESTYPE : VIFOR SUPPLIER : VIFOR ÇSwiss

02-10-00736 Manometer Heretic DRC 100/211.133 DN 100 Stainless steel G ½ “Scale 1 to 3 bar

02-10-00737 Valve Klinger KVD 11 “ PN/6 DN 20

02-10-00738 FILTER SAMSON 2N PN 16 DN 20

02-10-00739 Pressure reducer regulator valve Samson 39.2 PN 16 DN 20 0.1 TO 1.2 bar

02-10-00740 Pneumatic valve Gemini 514 /25 1”

02-10-00741 Safety valve Ramseyer 441 PN 16 DN 25 H4 2 BAR

02-10-00742 Steam trap spirax sacra FT 11 – 4.5 TV DN 40

02-10-00743 Pneumatic valve Gemini 514 /40 1 ½”

02-10-00744 Pressure reducer Norgen 11-824-011-1”

02-10-00745 Pressure reducer with filter and water tap Festo LFR –1/4-5-7-SM

02-10-00746 Check valve Festo H- ¼ “a

02-10-00747 Electro-magnet valve Lucifer 132A 54 24 V DC

02-10-00748 Pressotat Ashcroft 200 mbar to 4.6 bar

02-10-00749 Electro-magnet valve Lucifer 321 K 13 220 V- 50 Hz

02-10-00750 Safety valve kugler 7470 ½ “

02-10-00751 Ciculator Grundfoss up 25 –45 220 V – 50 Hz

02-10-00752 Thermal resistor gauge degussa PT 100 250 mm Special execution

02-10-00753 Contact thermometer Haenni 0 to 120 c0 L= 250 mm 3 meters

02-10-00754 Pressostate Aschcroft - 1 to 2.3 ba

02-10-00755 Micro switch Telemcanique XCK – J562

02-10-00756 Electro – magnet Bachofen GTCA 060X43 A01 24 V DC

02-10-00757 Manometer Haenni DRC 100/211.133 DN 100 Stainless steel G ½” 0-10 ba

02-10-00758 Recorder ELME S-16 with special paper and inked -Ribbon

02-10-00759 Door gasket LD 3961-82/08-11514

02-10-00760 Mechanical shaft seal Type : NO – AR : 96527 NO.CLIENT : 30023 401

SYM : 1158039900 uu50 REF : 876952 NO – NEC OU ART : 7913 243

NORMOPAC33+GRAIN 244 X 14- 47- 26-31- 13

02-10-00761 Garriagas & trys data ( per set ) capacity 380 containers of 500ml . Length 1350 mm.width 1000mm Height 1500 mm

02-10-00762 Charger complete 220/24 V

02-10-00763 Light emitting diode ( LED) for control panal

02-10-00764 Motor type F160 M.4 380V 50 HZ HKW RPM 1460 3PH SPARE PARTS FOR AIR COMPRESSORTYPE : ATLAS COPCO AG 808ESERIAL : ARP 823 38gSupplier : VIFOR Manufacturer:

( Filter element ) For high efficiency liquid and aerosol removal filter

02-10-00765 type PD 300 1202 3569 part No.

02-10-00766 Compressor Element 2989 0012 00

02-10-00767 Bearing 0504 061700

02-10-00768 O – Ring 0663 7154 00

02-10-00769 Gasket 2252 5475 00

02-10-00770 bearIng 0508 2115 01

02-10-00771 gear Wheel 2252 7748 00

02-10-00772 bearing 0508 2158 01

02-10-00773 bearing 0506 5115 00

02-10-00774 Seal ring 1619 5177 00

02-10-00775 gear wheel 2252 7747

02-10-00776 Air Filterelement 1030 0979

02-10-00777 Separator 2252-6313-00

02-10-00778 Gasket 2252 6299 01

02-10-00779 Minimum pressur valve ,complet 2252 7129 80

02-10-00780 cupling element 1619 5242

02-10-00781 fan 2253 4947

02-10-00782 motor 380v 75 kw 1460 RPM 50 HZ 1080 2300- 02

02-10-00783 Atlas copco air dryer type FD230

SPARE PART FOR CHILLERType : pcx – 180 H5

Supplier : vifor Manufacturer : Dunham – Bush LTD Portsmoth hampshire - England

02-10-00784 Oil pump Mod pump: 88 AT 3 Type : 6 MTR :1013 Voit 400 Frg 50 Thermally protector

02-10-00785 Compressor complete with motor

Mod :1615 HHF4 V5 D Serial : 82B 800063 ENE FILE : X4357WP –0128 volt 380 PH 3 Freq.50

02-10-00786 Pilot Expansion – valve

02-10-00787 Pilot Expansion – valve 5H TCLE GT 2271

02-10-00788 Main Expansion - valve POS: 125 H2 GT: 2597 FRQ: 50 Hz Volt : 240 v

SPARE PARTS FOR STEAM BOILERTYPE : VITEX RD – 16

Supplier : VIFORManufacturer : Paul WEBER AG- SWITZER Land Suppliers No.

02-10-00789 Spare glasses klinger Gr.VIIA weber

02-10-00790 Set of gasket for Erw 42 weber

02-10-00791 Safety valve type: 431 - 433 DN 25-150 Geber leser

02-10-00792 Gauge Cocks type D8 -65 - 025 klinger

02-10-00793 Reflex Liquid level gauges type KB-D klinger

02-10-00794 Drain Cock ABL klinger

02-10-00795 Flame control box Elco

02-10-00796 TYPE : LAC 3-025 SERIEL :02 220v-240v N-50HZ ts 5sec 3.5 VA

02-10-00797 MOTOR fan 380 v 5.5 kw RPM 2925 50 HZ NO.03499685/LKM-313TO2

FILTERS TO LUWA AIR CONDITIONING SYSTEMS

TYPE : LUWASupplier : VIFOR

Manufactuer : LUWA Swiss

02-10-00798 Pre Filter type FP 85x61

02-10-00799 Pre Filter type FP 85X305X610

02-10-00800 Pre Filter type FP85X610X508

02-10-00801 Hepa filter type RR-S 610X610




02-10-00805 Air filter class 2 15 ½” x24 1/2”X1/8

02-10-00806 a- 3- way mixing valve ( hong well ) type : v5329a nw50

02-10-00807 b- 3- way mixing valve ( hong well ) type : v5329a nw 65

02-10-00808 c- 3- way mixing valve( hong well ) type : v5013 a "1 nd 10

02-10-00809 d- 3- way …. Mixing valve ( hong well ) type : v5013a "1 1/4 nd 10

02-10-00810 e- 3- way mixing valve ( hong well ) type : v5013a " 1/2 nd 10

02-10-00811 f- 3- way mixing valve ( hong well ) type : v5013 a " 3/4 nd 10

02-10-00812 g- electrical valve ( hong well ) type : m7420 a

02-10-00813 h- electrical valve ( hong well ) type : m7421a

02-10-00814 I- electrical valve ( hong well ) type : m6420a

02-10-00815 j- regulating damper ( hong well ) type : sm24 - sr10

02-10-00816 MELTING POINT APPARATUSELECTRICALLY HEATED

TEMPERATURE RANGE UP TO 360 C .AN ANBOTARY SCATE ( 0 - 10 ) .THE HEATING BLOCK IS SURROWDED BY INSULATIONNATURAL TO MINILORS OF HEAT

02-10-00817 PORTABLE CONDUCTIVITY METERRANGE O TO 199.9 MSRESOLUTION 0.1 MSACCURACY : -+ 0.5 c

TEMP RANGE : -10 TO + 105 C . ACCURACY : -+ 0.5 C .with calibration standard

02-10-00818 CHLORIDE ANALYSIS MODERN TYPE RANGE : 10 - 999 MG/L SAMPLE VOLUME500 ML,WITH CHLORIDE STANDARD FOR CALIBRATION.

OVEN ,HIGH TEMPERATURE

02-10-00819 RANGE 50-500 C, CAPACITY 30L.,FEATURES S.S. INTERIORAND ELECTRONIC CONTROL.LARGE AREA GRID SHELVER,CONTROL BY DIRECT READING

THERMOSTATE THO OUTER SHELLS STEAL AND THE INNERIS ALUMINIUM.

02-10-00820 PORTABLE DIGITAL THERMOMETERRANGE: 50 TO + 150 C.,WATER RESISTANT PROPE,DISPLAYCONTROL WITH BATTERY,WITH COLLOIDAL QUAPHITE PACK

THERMOMETER,MERCURY IN GLASS

02-10-00821 RANGE : 10 - 10002-10-00822 10 - 20002-10-00823 10-30002-10-00824 10- 400

02-10-00825 HEAKE FOUR POSITION MAGNATIC STIRRING PLAT FORMOPERATING SPEED,RANGE:0-1100 REV./MIN.,S.S. CASINGALLOW STIRRING OF NOT LESS THAN 4 SAMPLES.

02-10-00826 MAXIMUM THERMOMETER

IT RESEMBLE THE ORDINARY CLINICAL THERMOMETER BUTIT'S TEMP.IS MORE EXTENDED FITSTARTS FROM(70-150).

02-10-000827 HYDROMETER NAFLAC - PATTERNFOR DETERMINATION OF DISSOLVE SOLID IN BOILER ANDSIMILAR WATER ACCORDING TO THE NAFLOC METHOD WITHPOLISHED METOL BULB AND SCALE CALIBRATION 0.998 TO

1.01 IN 0.0002 SUBDIVISION MAXIMUM

02-10-00828 DIGITAL POLARIMETER

02-10-00829 MODER TYPE 360 ANGULAR SCALE SUBDIVIDED INCLUDED SODIUM LAMP 35W .

02-10-00830 VISCOMETER,INCLUDING STIRRING MOTOR AND PADDLE,

TURNTABLE CONTROL AND BOOST HEATERS.VARIABLE AUTO GRANSTORMER,ACCESSORIES.CONTACT THERMOMETER 10- 100 C.

COOLING COIL .COVER FOR TURNTABLE .STOP WATCH .

02-10-00831 DIGITAL TEMPERATURE-MONITOR FOR PYROGEN TEST/WITH

PROBE TYPE A - RK .

RECTAL TEMP. OF RABBET OR ANOTHER ANIMALS.

02-10-00832 STAINLESS STEEL FILTRATIONWITH LID.,FUNNEL CAPACITY 500ML,BASE CLAMP FILTER

DIAMETER47 MM,AND MANIDFOLD( PTFE) GASKET SILICONESEALING RING IN/LID.

02-10-00833 ANALYTICAL BALANCES

AUTOMATIC CALIBRATION,CAPACITY:260 G.,0.1MG SENSITIVITYREADIABILITY: 0.0001 GM.

02-10-00834 MASSES FOR GENERALGENERAL PURPOSE WITH ALUMINIUM FRACTION.

RANGE OF MASS 0.1MG… 100GM IN WOODEN BOX.

02-10-00835 SARTORIUS MEMBRANE filterSPECIAL TYPE FOR MICROBIOLOGICAL CELLULOSE NITRATE,. PORE SIZE 0.45Mm.

02-10-00836 TAPE ADHESIVE INDICATOR 3M .AUTOCLAVE COLOUR CHANGE STERILIZATION TAPE WITH STEAM

SENSITIVE INK IN 55M ROLLS.COLOUR CHANGES FROM WHITE TO

DARK BROWN ON 20 MIN. EXPOSURE AT 121 C.

02-10-00837 THERMOLOG S STEAM STERILIZATION

INDICATOR.

SPARE PART FOR WRAPPING MACHINE TYPE : 010Supplier : viforManufactuer : CAVANA Company Italy

upper –cutting and soldering knif

6

02-10-00838 Printed circuit VAR 1

02-10-00839 Thermo-control TCI Type : AIOLS 0-2 450

8

02-10-00840 FLIP –FLOP 202-10-00841 Lower-cutting and

soldering knife6

02-10-00842 heaters elements for longitudinal sealing

60

02-10-00843 driving box for rack 4

02-10-00844 jaw extractor 402-10-00845 soft anvil for jaw 5 meter02-10-00846 discharge belt 202-10-00847 longitudinal

soldering belt 2

02-10-00848 bronze bush for upper & lower jaws

16

02-10-00849 sensor ( Pr06e T 102)

40

WATER TREATMENT Supplier: VIFOR SA GENEVE Manufacturer: CHRIST Swiss

02-10-00850 SPEAR PARTS FOR SCAVENGER FILTER

02-10-00851 SALT POT ( C1) FOR SCAVENGER Type: CHRIST SCB-50 Q 400mm

02-10-00852 diagram TC1-23-2640 dswitch over valve("1) (B1) diagram TC1-23-2640 d

02-10-00853 softener filter type : CHRIST BS -25 CH

02-10-00854 Salt pot (c2) for softener filter type: BS-25 CH diagram TC1-23-2640 d Q500mm

02-10-00855 switch over valve1 1/2 diagram TC1-23-2640 d

02-10-00856 Resin for neutralizor christ NT-80 type AKDOLIT GRAN I

02-10-00857 Amberlite IRA - 410

02-10-00858 deionizer filter type MAXISTIL , 10 DUPLEX TC1-23-2640 d

02-10-00859 VALVES DN 20 FROM diagram TC1-23-2640 d



SPEAR PARTS FOR SOLUTION PREPERATION

Supplier: VIFOR Manufacturer: Fristam F. Stamp KG(GMGH&CO)2050 HAMBURG 80/ Telex 021 7804

02-10-00862 Pump complete with motor Type : FP 722F

02-10-00863 Mechanical shaft seal complete

02-10-00864 filter holder complete type;YY30 - 293 -16 with spare parts

02-10-00865 a-Vent relief valve cat. No.: YY 30 293 66

02-10-00866 b-hand wheel assembly and lock bolt cat No. : YY 22 293 57

02-10-00867 c-intel flow detector cat. No. : YY30 293 07

Complete project for IVPLANT using P.V.C Bags consist of : produce 4000 000 bag / year atone shaft

02-10-00868 High frequency bag welding machine to weld Lay-flat PVC sheath

and weld tube in the bags. The machine is doing automatically the following operations:- A-printing of the bags by hhot steaming processB-welding of the bags together with the filling tube diameter 6.3*7.9 mm with the possibility to weld 1,2 or 3 filling tubes at the time.

C-sealing of the filling tube(s) necessary for possible long term storage of the bags.D-speration of the bags by hot knnives:

*produce bags of volume ( 100,250,500,1000,2000,3000 Ml) *Capacity : 1200 bags/h*Electric supply : 380 volt. - 50 hertz

3 - phase+neutral +earth maximum power : 25 Kw-60 Amps.*compressed air consumption 30 NM3 /h at 7 bar working pressure controls with PLC over all dimention :

length : 7 mwidth : 3m height : 2.30 m*with suitable carriages containers

02-10-00869 Full automatic stopper washing machine to wash special macrolon stoppers T.N.C.A. with D.W. and filtered compressed air capacity : 2000 stopper/h

02-10-00870 Full automatic bags washing machine to washing machine to wash PVC bags size ( 100 ml to 3000 ml ) with filtered D.W and suuitable pressureto wash bags completely and suction it by foour stage capacity : 2000 bag/h

02-10-00871 fully automatic printing machine to print batch No. man date , Exp.date

on PVC bags capacity for each : not less than 2000 opeartion/h

02-10-00872 full automatic filling sealing machine for PVC bags size (100ml to 3000ml ) machine suitable both to automatic filling and to automatic stopper insertion affer the filling *the plugs are automatically fed and then automatically inserted by special station inside the filling pipe.

*the nozle can be suited for standard 6-8 mm pipe as well as for any

other size of pipe.

*the size of equipment : hight 190mmxwidthh 150 mmxdepth200mmcapacity : 1500-3000 bag/h

02-10-00873 full automatic autoclave measurment : length : 3950 mmdiameter: 1480mmtotal width : 1560 mmheight : 1850 mmcapacity : 760 contanier of 500 ml ( 2 set of carriages)

02-10-00874 carriages and trays data (per set)

capacity : 380 containers of 500 ml

length : 1350 mmwidth :1000 mmheight : 1500 mm

02-10-00875 visual control to check the forign particle using polarized light with twoconveyers belts length of each 12 m.

02-10-00876 fully automatic overwrapping machine to wrap PVC bags size (100 ml to 3000 ml) using P.E. overwrapping .capacity : 70 bag/min.

with two S.S container length 2m x 1.5 m width x 0.5 m height

02-10-00877 automatic cartoning machine to fold carton transport even lower

carton quality dimentions of the carton needed :length 39.5 cm, height 12.5 cm , width 19.0 cm capacity : 2000 box/h

02-10-00878 Scale to check bags weight techincal data :- scale range ( kg) scale division(g) max.100d(kg) 5 2 6

02-10-00879 Scale to raw meterials technical data:- scale range(kg) scale division(g) 400 200

02-10-00890 scale for raw chemical technical data:- scale range (kg) scale division(g) 20 10

02-10-00891 Electrical forklifter capacity :- 2000 kgs

height : 7m

02-10-00892 Manuual forklifter capacity : 2000 kgs

02-10-00893 electrical autonomous floor cleaning machine

02-10-00894 water vacuum cleaner

02-10-00895 plastic carriage containers volume : 80 mmh x 50 mmw x 50 mml

S.S tanks 02-10-00896 a.volume 7000l with

heating coil 02-10-00897 b.volume 7000l with

heating , cooling , coil and mixer with level site

class , with complete filteration and pumping unit.

02-10-00898 Galvanized tanks for raw water capacity : 60 m3 each

02-10-00899 Distillation unit *out put : 2000 l/h

*steam heating *supplies with deionized water *Distilled water for I.v*with PLC control

02-10-00900 Steam boiler with dirator *output : 2000 kgs/h

*maximum pressure 8 bar *with feeding pump and light fuel *dosing unit and other accessories *with PLC control

02-10-00901 Air compressor *output : 25 m3/minut

*maximum pressure 8 kg/cm2*free of oil 100 % * with PLC control

02-10-00902 water tretment containing 2 lines one in operation and the second stand by:-

the line contain 1-filter activated carbon2-scavnger filters

3-softener4-Deionizer5-regeneratioons for above filters automaticlly 6-suitable containers for (salt - Hcl - naaoH )for regeneration of resins.

7-all parts are made of rigid PVC8-all systems controlled by PLC

02-10-00903 Heating Boilerout : 260 KW/hwith circulation pump

02-10-00904 centrifugal Water cooled chiller , Capacity 475 tons. Voltages 380 v, 50 HZ Motor starter chiller Recommended spare parts for 3 years3- All needed accessories .

02-10-00905 chillers specification for each chiller 1- cooling cap acity 600 KW

2- number of compressors3- tupe of copressor screw4- chilled Water in/out 6/12 c5- condenser water in/ out 30/35 c

filters :02-10-00906 a -cellulose

acetatefilters type 293 poresize 1.2mm-25 paper per box

02-10-00907 b-class fibre -perfilter type 257-50 paper perbox /box

02-10-00908 c-cellulose acetate filter type 142 poresize 1.2 mm 50 paper /box

02-10-00909 d-class fiber perfilter type 124-50 paper /box

02-10-00910 e-supper microne -Wynd filter, DPPY 1 microne

02-10-00911 f-pall cartrige filter type MCY 4463 BP poresize 0.45 Mm

02-10-00912 protable conveyer belt drived by electric device with variable speed and

for directional motion for the belt.

02-10-00913 Large wet service unit 850 /900 mm hight x 120mm width x 600mm deep

02-10-00914 upper cup board with gllass doors750mm high x 1170 mm width x 320mm

deep (for1200mm modul)

02-10-00915 under bench trav trolley size 700mm highx1030mm widthx475mm deep(hinged doors optional )

02-10-00916 suitable pressure gauge to indicate positive pressure inside the clean room

INKS 02-10-00917 for DEXTROSE SALINE

(Adult ) k 31

02-10-00918 for maniitol 20% k23

02-10-00919 for maniitol 10% k37

02-10-00920 for DEXTROSE 10% k 10

02-10-00921 for DEXTROSE 50% k 40

02-10-00922 for DEXTROSE SALINE (INFANT ) k 65

02-10-00923 for ringer k 50

02-10-00924 for normal saline k20 white ink pink

Solvents :kvsKVHKDTHANNER

BAGS SERARETING MACHINE TYPE : VIFOR SUPPLIER : VIFOR

02-10-00925 motor with gerbox complete

02-10-00926 sets of S.S Roll complete

02-10-00927 A COMPLETE I.V. SOLUTION PRODUCTION PLANT .PACKING : BOTTLE BAGS MADE FROM EITHER " POLYETHYLENE " OR POLYPROPYLENE " VOLUME : ( 5-50 -100-250-500-1000) ML .

CAPACITY : ( 16,000000) SIXTEEN MILLION BOTTLES OF 500 ML VOL. PER ANNUM .DESCRIPTION :1- MACHINERY : BLOW - FILL & SEAL MEDICAL AUTOMATIC MACHINES ( WITH COMPLETE AUXILLARY EQUIPMENT & MOULDS FOR EACH SIZE ) 2-COMPLETE SOLUTION PREPARATION UNIT

3- COMPLETE STERILIZATION UNIT4- WATER TREATMENT UNIT.5- COMPLETE BIO-AIRCONDITIONING SYSTEM.6- LAMINAR FLOW SYSTEM.7- CLEAN-ROOM EQUIPMENT.8-PACKING MACHINERY & EQUIPMENT.

9- COMPLETE (QUALITY CONTROL & LABORATORY EQUIPMENT & INSTRUMENTS.

10- ACCESSORIES ,EQUIPMENT & UTILITIES FOR STORAGE AND HANDLING.

11- SPARE-PARTS FOR FIVE YEARS OPERATIONS.LIST OF SPARE PART NAME , QUANITY FOR EACH MACHINE SHOULCL BE MENTIONED IN THE OFFER

12- INSTALLATION AND START-UP OF PLANT.

13- WARRANTY PERIOD: (1)ONE YEAR AFTER START-UP.

14- TRAINING ON OPERATION AND MAINTENANCE AT BUYER'S SITE FOR ONE MONTH.15- TRAINING OF(SIX)PERSONS FOR A PERIOD OF TWO WEEKS AT MANUFACTURER'S SITE.

THE SUPPLIER WILL BEAR TRAVELLING,MISSING&ACCOMODATION EXPENSES.16- DOCUMENTS:TWO SETS OF ENGLISH MANUAL OPERATION AND MAINTENANCE.

CIVIL,MECHANICAL & ELECTRICAL DRAWINGS OF THE PLANT.

17- OIL,LUBRICANTS AND SPECIAL TOOLS.P.S. : 1. EACH ITEM HAD TO BEST REGARDS QUOTED AND PRICED CLEARLY.

2. THE PRICES CIF BAGHDAD.3. ANY OPTIONAL OFFER COULD BEST REGARDS QUOTED SEPARATELY.4. COUNTRY OF ORIGIN: EUROPE.

Thevmal print machine on p.v.c bag with ripon

baghdad plant02-10-00928 Heating Busnes No. of Holes 27

/o of Holes 10/10 No. of Raws 3

02-10-00929 Constsicition Busnes

No. of Holes 3 /o of Holes S-6-8/10 No. of Raws 1

02-10-00930 Burner HOLDER Assembly 516



Outerdin mm

Length fused ends mm


10.75 -+ 0.13

1500

02-10-00934 Burner HOLDER Assembly 514 ET

10.75 -+ 0.13

1500


12.75 -+ 0.13

1500

02-10-00936 RC.E. 21 Assembiy for Ampule / cut

12.75 -+ 0.13

1500

17.75 -+ 0.15

1500

TUBING OF BOROSILICATE GLASS , LENGTH APP . 1.5 M

17.75 -+ 0.15

1500

out side dia . In mm

wall thickness . In mm

02-10-00937 4+- 0.3 0.8 +-0.102-10-00938 5+- 0.3 0.8 +-0.102-10-00939 6 +- 0.3 1.0+- 0.102-10-00940 6 +- 0.3 1.5 +- 0.202-10-00941 7 +- 0.3 1.0 +- 0.102-10-00942 7 +- 0.3 1.5 +- 0.202-10-00943 8 +- 0.3 1.0 +- 0.102-10-00944 8 +- 0.3 105 +- 0.202-10-00945 9 +- 0.3 1.0 +- 0.102-10-00946 9 +- 0.3 1.5 +- 0.202-10-00947 10 +-0.3 1.0 +- 0.102-10-00948 10 +- 0.3 1.5 +- 0.2 02-10-00949 10 +- 0.3 202 +- 0.2 02-10-00950 11 +- 0.3 1.0 +-0.102-10-00951 11 +- 0.3 105 +- 0.202-10-00952 11 +- 0.3 2.2 +- 0.202-10-00953 12 +- 0.3 1.2 +- 0.1 02-10-00954 12 +- 0.3 1.5 +- 0.202-10-00955 12 +- 0.3 2.2 +- 0.202-10-00956 13 +- 0.3 1.0 +- 0.102-10-00957 13 +- 0.3 1.5 +- 0.202-10-00958 13 +- 0.3 2.2 +- 0.202-10-00959 14 +- 0.3 1.0 +- 0.1 02-10-00960 14 +- 0.3 1.5 +- 0.202-10-00961 14 +- 0.3 2.2 +- 0.202-10-00962 15 +- 0.3 1.2 +- 0.102-10-00963 15 +- 0.3 1.4 +- 0.2 02-10-00964 15 +- 0.3 2.5 +- 0.2 02-10-00965 16 +- 0.3 1.2 +- 0.1

02-10-00966 16 +- 0.3 1.8 +- 0.202-10-00967 16 +- 0.3 2.5 +- 0.202-10-00968 17 +- 0.63 102 +- 0.102-10-00969 17 +- 0.3 1.8 +- 0.202-10-00970 17 +- 0.3 2.5 +- 0.202-10-00971 18 +- 0.3 1.2 +- 0.102-10-00972 18 +- 0.3 1.8 +- 0.202-10-00973 18 +- 0.3 2.5 +- 0.202-10-00974 19 +- 0.3 1.2 +- 0.102-10-00975 19 +- 0.3 1.8 +- 0.202-10-00976 19 +- 0.3 2.5 +- 0.202-10-00977 20 +- 0.4 1.2 +- 0.102-10-00978 20 +- 0.4 1.8 +- 0.202-10-00979 20 +- 0.4 2.5 +- 0.302-10-00980 22 +- 0.4 1.2 +- 0.102-10-00981 22 +- 0.4 1.4 +- 0.202-10-00982 22 +- 0.4 2.5 +- 0.302-10-00983 24 +- 0.4 1.2 +- 0.102-10-00984 14 +- 0.4 1.8 +- 0.202-10-00985 24 +- 0.4 2.0 +- 0.202-10-00986 26 +- 0.4 1.4 +- 0.202-10-00987 26 +- 0.4 2.0 +- 0.202-10-00988 28 +- 0.4 1.4 +- 0.202-10-00989 28 +- 0.4 2.0 +- 0.202-10-00990 28 +- 0.4 2.8 +- 0.302-10-00991 30 +- 0.7 1.4 +- 0.202-10-00992 30 +- 0.7 2.0 +- 0.202-10-00993 30 +- 0.7 2.8 +- 0.302-10-00994 32 +- 0.7 1.4 +- 0.202-10-00995 32 +- 0.7 2.0 +- 0.202-10-00996 32 +- 0.7 2.8 +- 0.302-10-00997 34 +- 0.7 1.4 +- 0.202-10-00998 34 +- 0.7 2.0 +- 0.202-10-00999 34 +- 0.7 2.8 +-0.302-10-01000 36 +- 0.7 1.4 +- 0.202-10-01001 36 +- 0.7 2.0 +- 0.202-10-01002 36 +- 0.7 2.8 +- 0.302-10-01003 38 +- 0.7 1.4 +- 0.202-10-01004 38 +- 0.7 2.0 +- 0.202-10-01005 38 +- 0.7 2.8 +- 0.302-10-01006 40 +- 1.0 1.6 +- 0.202-10-01007 40 +- 1.0 2.3 +- 0.302-10-01008 40 +- 1.0 3.2 +- 0.402-10-01009 42 +- 1.0 1.6 +- 0.202-10-01010 42 +- 1.0 2.3 +- 0.302-10-01011 42 +- 1.0 3.2 +- 0.402-10-01012 44 +- 1.0 106 +- 0.202-10-01013 44 +- 1.0 2.3 +- 0.302-10-01014 44 +- 1.0 3.2 +- 0.402-10-01015 46 +- 1.0 1.6 +- 0.202-10-01016 46 +- 1.0 2.3 +- 0.302-10-01017 46 +- 1.0 3.2 +- 0.402-10-01018 21 +- 0.4 1.8 +- 0.202-10-01019 21 +- 0.4 2.5 +- 0.302-10-01020 21 +- 0.4 1.2 +- 0.102-10-01021 23 +- 0.4 1.4 +- 0.2

02-10-01022 23 +- 0.4 2.5 +- 0.302-10-01023 25 +- 0.4 1.4 +- 0.202-10-01024 25 +- 0.4 2.0 +- 0.202-10-01025 25 +- 0.4 2.8 +- 0.302-10-01026 27 +- 0.4 1.4 +- 0.202-10-01027 27 +- 0.4 2.0 +- 0.302-10-01028 27 +- 0.4 2.8 +- 0.302-10-01029 29 +- 0.4 1.4 +- 0.202-10-01030 29 +- 0.4 2.0 +- 0.302-10-01031 29 +- 0.4 2.8 +- 0.302-10-01032 31 +- 0.7 1.8 +- 0.202-10-01033 31 +- 0.7 2.8 +- 0.302-10-01034 33 +- 0.7 1.8 +- 0.202-10-01035 33 +- 0.7 2.8 +- 0.302-10-01036 35 +- 0.7 1.8 +- 0.202-10-01037 35 +- 0.7 2.8 +- 0.3 02-10-01038 37 +- 0.7 1.4 +- 0.202-10-01039 37 +- 0.7 2.8 +- 0.302-10-01040 39 +- 0.7 1.8 +- 0.202-10-01041 39 +- 0.7 2.8 +- 0.302-10-01042 41 +- 1.0 2.0 +- 0.302-10-01043 43 +- 1.0 2.0 +- 0.302-10-01044 45 +- 1.0 2.0 +- 0.302-10-01045 47 +- 1.0 2.0 +- 0.302-10-01046 49 +- 1.0 2.0 +- 0.302-10-01047 48 +- 1.0 1.6 +- 0.202-10-01048 48 +- 1.0 2.3 +- 0.302-10-01049 48 +- 1.0 3.2 +- 0.402-10-01050 50 +- 1.0 1.8 +- 0.202-10-01051 50 +- 1.0 2.5 +- 0.3

02-10-01052 50 +- 1.0 3.5 +- 0.4

02-10-01053 52 +- 1.0 1.8 +- 0.2

02-10-01054 52 +- 1.0 2.5 +- 0.3

02-10-01055 52 +- 1.0 3.5 +- 0.4

02-10-01056 54 +- 1.0 1.8 +- 0.2

02-10-01057 54 +- 1.0 2.5 +- 0.3

02-10-01058 54 +- 1.0 3.5 +- 0.4

02-10-01059 56 +- 1.0 1.8 +- 0.2

02-10-01060 56 +- 1.0 2.5 +- 0.3

02-10-01061 56 +- 1.0 3.5 +- 0.4

02-10-01062 58 +- 1.0 1.8 +- 0.2

02-10-01063 58 +- 1.0 2.5 +- 0.3

02-10-01064 58 +- 1.0 3.5 +- 0.4

02-10-01065 60 +- 1.5 2.2 +- 0.3

02-10-01066 60 +- 1.5 3.2 +- 0.4

02-10-01067 60 +- 1.5 4.2 +- 0.5

02-10-01068 65 +- 1.5 2.2 +- 0.3

02-10-01069 65 +- 1.5 3.2 +- 0.4

02-10-01070 65 +- 1.5 4.2 +- 0.5

02-10-01071 70 +- 1.5 2.2 +- 0.3

02-10-01072 70 +- 1.5 3.2 +- 0.4

02-10-01073 75 + 1.5 2.2 +- 0.3

02-10-01074 75 + 1.5 3.2 +- 0.4

02-10-01075 80 +- 108 2.5 +- 0.3

02-10-01076 80 +- 1.8 3.5 +- 0.4

02-10-01077 85 +- 1.8 2.5 +- 0.3

02-10-01078 85 +- 1.8 3.5 +- 0.4

02-10-01079 90 +-1.8 2.5 +- 0.4

02-10-01080 90 +-1.8 3.5 +- 0.4

02-10-01081 95 +- 1.8 2.5 +- 0.3

02-10-01082 95 +- 1.8 3.5 +- 0.4

02-10-01083 100 +- 1.8 2.5 +- 0.3

02-10-01084 100 +- 1.8 3.5 +- 0.4

02-10-01085 105 +- 1.8 2.5 +- 0.3

02-10-01086 105 +- 1.8 3.5 +- 0.4

02-10-01087 110 +- 1.8 2.5 +- 0.3

02-10-01088 110 +- 1.8 3.5 +- 0.4

02-10-01089 115 +- 1.8 2.5 +- 0.3

02-10-01090 115 +- 1.8 3.5 +- 0.4

02-10-01091 120 +- 1.8 2.5 +- 0.3

02-10-01092 120 +- 1.8 3.5 +- 0.4

02-10-01093 125 +- 1.8 2.5 +- 0.3

02-10-01094 125 +- 1.8 3.5 +- 0.4

02-10-01095 130 +- 108 2.5 +- 0.3

02-10-01096 130 +- 1.8 3.5 +- 0.4

02-10-01097 135 +- 1.8 2.5 +- 0.3

02-10-01098 135 +- 1.8 3.5 +- 0.4

02-10-01099 140 +- 1.8 2.5 +- 0.3

02-10-01100 140 +- 1.8 3.5 +- 0.4

02-10-01101 145 +- 1.8 2.5 +- 0.3

02-10-01102 145 +- 1.8 3.5 +- 0.4

02-10-01103 150+-2.0 3.5 +- 0.4

02-10-01104 150+-2.0 4.2 +- 0.502-10-01105 155+-2.0 3.5 +- 0.402-10-01106 155+-2.0 4.2 +- 0.502-10-01107 160+-2.0 3.5 +- 0.402-10-01108 160+-2.0 4.2 +- 0.502-10-01109 165+-2.0 3.5 +- 0.402-10-01110 165+-2.0 4.2 +- 0.502-10-01111 170+-2.0 3.5 +- 0.402-10-01112 170+-2.0 4.2 +- 0.502-10-01113 175+-2.0 3.5 +- 0.402-10-01114 175+-2.0 4.2 +- 0.502-10-01115 180+-2.0 3.5 +- 0.402-10-01116 180+-2.0 4.2 +- 0.502-10-01117 185+-2.0 3.5 +- 0.402-10-01118 185+-2.0 4.2 +- 0.502-10-01119 190+-2.0 3.5 +- 0.402-10-01120 190+-2.0 4.2 +- 0.502-10-01121 195+-2.0 3.5 +- 0.402-10-01122 195+-2.0 4.2 +- 0.502-10-01123 200+-2.0 3.5 +- 0.402-10-01124 200+-2.0 4.2 +- 0.502-10-01125 225+-2.0 3.5 +- 0.402-10-01126 225+-2.0 4.2 +- 0.502-10-01127 250+-2.0 3.5 +- 0.402-10-01128 250+-2.0 4.2 +- 0.502-10-01129 275+-2.0 3.5 +- 0.402-10-01130 275+-2.0 4.2 +- 0.502-10-01131 300+-2.0 4.0 +- 0.5

02-10-01132 capillary tubing mad of borosilicatc glass leng. App 1.5 m outside dia in mm inside dia in mm

02-10-01133 5 +- 0.4 0.6+- 0.102-10-01134 6 +- 0.4 1.7+- 0.202-10-01135 6 +- 0.4 2.2+- 0.202-10-01136 7 +- 0.4 0.8+- 0.102-10-01137 7 +- 0.4 1.2+- 0.202-10-01138 7 +- 0.4 1.7+- 0.202-10-01139 7 +- 0.4 2.2+- 0.202-10-01140 7 +- 0.4 2.7+- 0.202-10-01141 8 +- 0.4 1.7+- 0.202-10-01142 8 +- 0.4 2.2+- 0.202-10-01143 8 +- 0.4 2.7+- 0.202-10-01144 8 +- 0.4 3.0+- 0.202-10-01145 9 +- 0.4 1.7+- 0.202-10-01146 9 +- 0.4 2.7+- 0.202-10-01147 9 +- 0.4 3.0+- 0.202-10-01148 Rod made of

borosilicate Glass leng.app . 1.5 m outside dia in mm4 +- 0.4

02-10-01149 5 +- 0.402-10-01150 6 +- 0.402-10-01151 7 +- 0.402-10-01152 8 +- 0.402-10-01153 9+- 0.402-10-01154 10 +- 0.402-10-01155 12 +- 0.402-10-01156 13 +- 0.402-10-01157 14 +- 0.602-10-01158 16 +- 0.602-10-01159 18 +- 0.802-10-01160 20 +- 0.8 02-10-01161 22 +- 1.0 02-10-01162 24 +- 1.002-10-01163 26 +- 1.0

volumetric flasks , with edium - wide neck and one ring - mark ,borosilicate

glass, with blau brand blue grad nationcapacity ml stopper size ns

02-10-01164 10 7\1602-10-01165 20 10\1902-10-01166 25 10\1902-10-01167 50 12\2102-10-01168 100 12\2102-10-01169 200 14\23

02-10-01170 250 14\2302-10-01171 500 19\2602-10-01172 1000 24\2902-10-01173 2000 29\3202-10-01174 3000 29\3202-10-01175 5000 34\35

Round bottom flasks , medium neck , borosilicate glass with standard

ground joint capacity ml socket size ns

total heigt mm 02-10-01176 10 14\23

6002-10-01177 25 14\23

7502-10-01178 25 19\26

7502-10-01179 50 14\23

10502-10-01180 50 19\26

10502-10-01181 50 24\29

10502-10-01182 50 29\32

10502-10-01183 100 14\23

11502-10-01184 100 19\26

11502-10-01185 100 24\29

11502-10-01186 100 29\32

11502-10-01187 250 14\23

14502-10-01188 250 19\26

14502-10-01189 250 24\29

14502-10-01190 250 29\32

14502-10-01191 250 34\35

14502-10-01192 500 14\23

17502-10-01193 500 19\26

17502-10-01194 500 24\29

17502-10-01195 500 29\32

175

02-10-01196 500 34\35 175

02-10-01197 1000 24\29 210

02-10-01198 1000 29\32 210

02-10-01199 1000 34\35 210

02-10-01200 1000 45\40 210

02-10-01201 2000 24\29 260

02-10-01202 2000 29\32 260

02-10-01203 2000 34\35 260

02-10-01204 2000 45\40 260

02-10-01205 4000 29\32 315

02-10-01206 4000 34\35 315

02-10-01207 4000 45\40 315

02-10-01208 6000 29\32 355

02-10-01209 6000 34\35 355

02-10-01210 6000 45\40 355

02-10-01211 10 000 29\32 420

02-10-01212 10 000 45\40 420

02-10-01213 20 000 45\40 515

flasks , erlenmeyer , narrow neck borosili catc glass, gradnated

capacity ml outside dia neck/flask height mm

02-10-01214 25 22\42mm 70

02-10-01215 50 22\51mm 85

02-10-01216 100 22\64mm 105

02-10-01217 200 34\79mm 131

02-10-01218 250 34\85mm 140

02-10-01219 300 34\87mm 156

02-10-01220 500 34\105mm 175

02-10-01221 1000 42\131mm 220

02-10-01222 2000 50\166mm 280

02-10-01223 3000 50\187mm 310

02-10-01224 5000 48\220mm 365

flasks ,kjeldahl, borosili catc glass

capacity ml outside dia neck/flask height mm

02-10-01225 50 22\51 200

02-10-01226 100 22\60 200

02-10-01227 250 34\81 270

02-10-01228 500 34\101 300

02-10-01229 750 34\115 340

02-10-01230 1000 34\126 350

plain -end ground joints, full length , borosilicate glass

joint size sockets& conse NS

outer dia of tube in mm socket /cone total length in mm

02-10-01231 5\20 7\4 120

02-10-01232 7\25 11\6 120

02-10-01233 10\30 13\9 120

02-10-01234 12\32 16\11 120

02-10-01235 14\35 19\13 120

02-10-01236 19\38 22\17 120

02-10-01237 24\40 29\22 135

02-10-01238 29\42 33\26 135

02-10-01239 34\45 39\32 140

02-10-01240 40\38 45\36 145

02-10-01241 45\50 48\40 145

all sizes for socket joint and cone joint

plain -end spherical joints, borosilicate glassjoint bore size cup& ball S-mm

outer dia of tube in mm total length in mm

02-10-01242 13--2 8 120

02-10-01243 13--5 8 120

02-10-01244 19--9 13 120

02-10-01245 29--15 19 130

02-10-01246 35--24 28 130

02-10-01247 40--25 30 130

02-10-01248 41--25 30 130

02-10-01249 51--30 36 140

02-10-01250 64--40 48 150

all sizes forcup joint and ball joint STOP COCK STRAIGHT BOR , WITH INTER CHANGEABLE SOLID GLASS PLUG , BOROSILICATE GLASS

BORE DIA MM OLUG CONE NS With thread with retaining clevice

02-10-01251 1.5 12.502-10-01252 2.5 12.502-10-01253 2.5 14.502-10-01254 4 14.502-10-01255 4 18.8

with rubber cap retaining device

02-10-01256 6 21.5

02-10-01257 8 2402-10-01258 10 29.2

STOPCOCKS , STRAIGHT BORE WITH INTER CHANG EABLE PTFE PLUG BOROSILICATE GLASS WITH THREACL WITH RETAINING CLEVICE BORE DIA MM PLUG CONE NS

02-10-01259 1.5 12.502-10-01260 2.5 12.502-10-01261 2.5 14.502-10-01262 4 14.502-10-01263 4 18.802-10-01264 6 21.502-10-01265 8 2402-10-01266 10 29.2

STOPCOCKS- 3WAY , T - BORE WITH Interchaneable solid glass plug borosilicate glass

bore dia. Mm plug cone NS 02-10-01267 with thread with

retaining device 1.5

14.5

02-10-01268 2.5 18.802-10-01269 with rubber cap

retaining device 4.0

24

02-10-01270 6 29.2ditto , whith capillary side arms and thread with retaing device

02-10-01271 1.5 14.502-10-01272 2.5 18.8

ditto , with interchange able PTFE PLUG

02-10-01273 WITH Thread with retaining device 1.5

14.5

02-10-01274 2.5 18.802-10-01275 4 2402-10-01276 6 29.2

DITTO , with CAPILLARY side arms

02-10-01277 1.5 14.502-10-01278 2.5 18.8

stopcock , straight bore , with

capillary side arms , with

interchangeable solid glassplug

, borosilicate glass with thread with retaining device

02-10-01279 1.5 12.502-10-01280 2.5 12.5

Ditto with interchange able PTFE plug bore dia mm plngcone NS

02-10-01281 1.5 12.502-10-01282 2.5 12.502-10-01283 2.5 14.5

STOPCOCK , Z- WAY OBLIQUE BORE , WITH

INTERCHANGE ABLE SOLID GLASS PLUG BOROSILI CATE GLASS WITH RUBBER CAP AS RETINING CLEVICE BORE DIA MM PLUG CONE NS

02-10-01284 2.5 14.502-10-01285 4 18.8

DITTO , WITH CAPILLARY SIDE ARMS

02-10-01286 2.5 14.5

DITTO , WITH INTERCHANGE ABLE DTFG PLUG WITH THREACL WITH RETAINING DEVICE

02-10-01287 2.5 14.502-10-01288 4 18.8

DITTO , WITH CAPILLARY SIDE ARMS

02-10-01289 2.5 14.5

02-10-01290 STOP COCK FOR BURETTE , STRAIGHT WITH INTERCHANGE ABLE GLASS PLUG BORE 1.5 MM OUTER DIA OF TUBE 9 MM , NS 12.5 PLUG WITH THREACL AND FLETIBLE O- RING RETAINING DEVICE , BOROSILICATE GLASS

CUITURE TUBES , WITH AIR - TIGHT PLASTIC SCREW - CAPS , STERILITABLE

HEAVY - WALLED BOROSILICATE GLASS OUT SIDE DIA MM LENGTH MM

02-10-01291 12 15002-10-01292 14 15002-10-01293 16 15002-10-01294 18 15002-10-01295 20 15002-10-01296 22 15002-10-01297 14 15002-10-01298 26 15002-10-01299 28 15002-10-01300 30 15002-10-01301 32 18002-10-01302 34 18002-10-01303 36 18002-10-01304 38 18002-10-01305 40 180

forked clamp , stainless steel , for spherical joinfs

size spherical joints

02-10-01306 1302-10-01307 1902-10-01308 2902-10-01309 3502-10-01310 4002-10-01311 4102-10-01312 5102-10-01313 64

needle valves , one - way straight - connecting , borosilicate glass, with tefloninserts . For vacuum liquids and gases

max.opening outer dia . Of limbs

02-10-01314 2.5 mm 8 mm02-10-01315 4 mm 10 mm02-10-01316 6 mm 12 mm02-10-01317 ditto, with

capillary limbs, maximum opining 2.5 mm , outer dia of limbs 9 mm.needle valves , one - way angle -type borosilicate glass, with PTFE spindle

inserts . For vacuum liquids and gases

max.opening outer dia . Of limbs

02-10-01318 2.5 mm 8 mm02-10-01319 4 mm 10 mm02-10-01320 6 mm 12 mm

dr. boy Gmbh Injection Moulding M/C BOY 22S MACH NO. 20358 TYPE ; BOY 22SLIST OF SPEAR PARTS

DESCRIPTION PART NO.02-10-01321 LOGIC BOARD LP 104 962618102-10-01322 Amplifier board

AV1029626191

02-10-01323 Timer unit ZB100 962607702-10-01324 Timer set - up

module SB 10 Z 9626076

02-10-01325 Limit Switch 962802302-10-01326 Limit Switch 960302002-10-01327 Safety strip for

power driven 9603033

02-10-01328 Safety Limit Switch 9603076

02-10-01329 Limit Switch 962800402-10-01330 Temperature Sensor 9610008

02-10-01331 Relay 960605102-10-01332 Plastic Cylinder 28

mm1519671

02-10-01333 Nozzle heater band 732200302-10-01334 Adapter Heater Band 7322002

02-10-01335 Thermocouple Extension

9631011

02-10-01336 Heating Zone E841527754

9660005

02-10-01337 Solenoid Valve 962413602-10-01338 Solenoid Valve 962409702-10-01339 Solenoid Valve 962415602-10-01340 Solenoid Valve 962410502-10-01341 Solenoid Valve 962409302-10-01342 Logic Element 920808202-10-01343 Logic Element 920805302-10-01344 pressure Relief

Valve 9201039

02-10-01345 pressure Limiting Valve

9201038

02-10-01346 pressure control Valve

9201041

02-10-01347 O-ring 900202002-10-01348 O-ring 900206802-10-01349 O-ring 900210202-10-01350 O-ring 900210902-10-01351 O-ring 900211102-10-01352 O-ring 900211802-10-01353 O-ring 900212202-10-01354 O-ring 900214402-10-01355 O-ring 900216502-10-01356 O-ring 900215902-10-01357 O-ring 900216302-10-01358 O-ring 900301202-10-01359 O-ring 901100502-10-01360 O-ring 901100602-10-01361 O-ring 901100902-10-01362 O-ring 901102202-10-01363 O-ring 901103802-10-01364 Bearing 151406302-10-01365 Bearing 151405302-10-01366 Nozzle 1501473

INJECTION- BLOW MOULDING MACHINE MACHINE TYPE MODEL : REV 100 MACHINE SERIAL NO . : 125/95 MANUFACTURE YEAR

DESCRIPTION ITEM NO.

02-10-01367 PLASTICIZATION CYLINDER RESISTANCES O 95X95 WATT 1000

100/4

02-10-01368 HEATER BAND SUPPORTING HOT RUNNER O 95X30 WATT 400

100/5

02-10-01369 CARTRIDGE RESISTANCES C.C O 12.7X230 WATT 500

100/6

02-10-01370 SOLENOID ELECTRO - VALVE DN 10 TYPE K 16-2-115 V

100/7

02-10-01371 SOLENOID DISTRIBUTORS DN6 TYPE KVM 35- H-349- 115 V

100/8

02-10-01372 PRESSURE CONTROL DISTRIBUTOR TYPE 4D01- 35-207-03-02

100/9

02-10-01373 PRESSURE REGULATOR RE 2 V-3- V302

100/10

02-10-01374 DISCHARGE PRESSURE VALVE OF CYLINDERS TYPE C 4 V-9- B8 P

100/11

02-10-01375 AIR VAL VE TYPE BOSCH ISO-1- S12 VITED 820-024-028

100/12

02-10-01376 SET SPECIAL O RINGS VATION FOR REVOL VER- PLATES- MANDRELS

100/18

02-10-01377 SET NORMAL O RINGS FOR CYLINDERS

100/19

02-10-01378 EST POL YPAC SEALS FOR PISTONS AND CYLINDERS

100/20

02-10-01379 THERMOCOUPLES FOR CYLENDER AND DISTRIBUTOR

100/21

02-10-01380 MODULE INPUT 6ES 5421

100/28

02-10-01381 MODULE OUT PUT 6 ES 5450

100/29

02-10-01382 TIMER TYPE GEFRAN TVDNA

100/31

02-10-01383 THERMOREGULATOR GEFRAN TYPE RA-81

100/32

02-10-01384 REMOTE CONTROL SWITCH ( RESISTANCES ) TYPE 3 TB-4010- OAG1-V110-50-60HZ

100/36

02-10-01385 REMOTE CONTROL SWITCH ( PUMP START )16A TYPE 3 TB-4212- OAG1-V110-50-60HZ

100/37

02-10-01386 REMOTE CONTROL SWITCH ( PUMP )32A TYPE 3 TB-4417- OAGI--50-60HZ

100/38

02-10-01387 THERMAL TYPE 3 UA-5200-2C- 16-25 AMP

100/39

02-10-01388 TIMER 7 PU- 6020- 7 HJ-20-110V-2-20 SEC

100/40

OTHERS :02-10-01389 COPMPLETE

PLASTIOZATION SCREW O 40

02-10-01390 MANDREL FOR BABY BOTTLES 250 ML

UNKNOWN ITEM NO. SUITABLE FOR THIS M/C (REV. 100/90)

02-10-01391 CAVITY FOR BABY BOTTLES 250 ML SPARE PART for Air Separation plant Gox 100 Linde job No.1410 1751 Lind Code;Dabbash 1-Unit type ; E270 -13.5 - SEZ-SSDenomination ORDER-NO.

02-10-01392 SCREW Compressor with all ball

N17975

02-10-01393 bcaring as spare part

02-10-01394 Housing flange K31660;0002-10-01395 coupling K32349;0002-10-01396 Lock washer N1794602-10-01397 Electric motor type

KA4355S-4 250 KW 1845 rpm

02-10-01398 Separator cartridge N16533

02-10-01399 Minimum pressure valve

N14530

02-10-01400 Blower N1749002-10-01401 Oil filter cartridge N16013

2- Oil Removing Filters of Molecular Sieve Station Type RO 400

Denomination ORDER-NO.02-10-01402 CARTRIDGE filter

model RC400 pl 1261

02-10-01403 Electric heater EH1

02-10-01404 Molecular Sieve TYPE 13X 1.6

02-10-01405 Solenoid valve / specification 2 - 2

2324620 1601

way valve / 220 V. 9 KW

02-10-01406 3- Expansion Turbine Type ETF 10 N 4 S

Linde job NO. 15080/670PLANT CODE: LA/6X ONP 100

02-10-01407 4-Oil pump : Minimum discharge capacity ( 90) 1/min

only geared pump 10 bar 5-Low Temperature Reciprocation pump Type KP3L -36 V

02-10-01408 PISTON ROD 02-10-01409 CYLINDER02-10-01410 PISTON RING02-10-01411 EXPANDER RING 02-10-01412 GUIDE RING 02-10-01413 SEALING RING 02-10-01414 SUPPORTING RING 02-10-01415 CALMPING RING02-10-01416 PACKING RING

6-LOW Temperature Reciprocation pump type KP2L -22/65 V

02-10-01417 PISTON ROD 28040402-10-01418 CYLINDER 28041302-10-01419 PISTON 28042302-10-01420 SECTION VALVE GUIDE 280437

02-10-01421 SECTION VALVE GUIDE 280439

02-10-01422 PISTON RING 28050602-10-01423 PISTON RING 22 250898

02-10-01424 EXPANDER RING 18 25092002-10-01425 GUIDE RING 22 * 17

* 1096947

SPARE PARTS FOR ROTORGRAE MACHINE S.N. : 8Y 187 , 33 Y 179

Description 02-10-01426 5/16 inch Tubing

Nut 02-10-01427 5/16 inch

Tubingsleeve 02-10-01428 5/16 inch Dia .

Copper pipe 02-10-01429 wormshaft 02-10-01430 Oil flinger 02-10-01431 wormshaft L. H.

End cap ( pUlley sidel

02-10-01432 Simplbelt vee - Belt 20/ 1120

02-10-01433 Driven pully 02-10-01434 simplabelt vari -

speed pulley 02-10-01435 speed Adjasting

screw 02-10-01436 worm shaft R.H.

End cap ( pump side )

02-10-01437 8G SUDDO pump 02-10-01438 5/ 16 INCH DIA

Nylon Tube 02-10-01439 Rotor Drive shaft

02-10-01440 Dua/ Lip oil seal

02-10-01441 Hopper locating Ring

02-10-01442 BEARINGHousing 02-10-01443 Skf 6011 RS1 Ball

Bearing 02-10-01444 OSCillating

Bracket 02-10-01445 Distance piece on

worm shaft 02-10-01446 31 T worm wheel 02-10-01447 shims for wheel

shaft 02-10-01448 5/16inch Bsw x 2

inch skt. Hd cap screw

02-10-01449 Crankshaft

02-10-01450 R.H. SCREEN Roller Assembly

02-10-01451 L.H. Screen Roller Assembly

02-10-01452 3/8 inch Dia . Nylon Tube

02-10-01453 3/8inch Tubing NuT

02-10-01454 3/32 HNCH Dia x 5/16 inch GROOVED PIN

02-10-01455 8 DP Rack 02-10-01456 Mesh 802-10-01457 Mesh 10 02-10-01458 Mesh 12 02-10-01459 Mesh 14 02-10-01460 Mesh 16

SPARE PARTS FOR AEROMATIC STR - 100 COM .- NO. 9510, NO. 11691 , NO. 7353 Description 3 Phase Motor

Pneumatic cylinder

02-10-01461 Nylon bearing 02-10-01462 2 Piece Nylon

damp 02-10-01463 Rubber ring for

flap 02-10-01464 Sleeve coupling 02-10-01465 set of inlet air

filters 02-10-01466 filtre champer

gasket 02-10-01467 frame gasket 02-10-01468 Rubber clqmper

for product container

02-10-01469 PULLEY 02-10-01470 Pneumatic lift

gasket 02-10-01471 wire rope for

filter susp ension

02-10-01472 Bracket for filter susp ension

02-10-01473 Rubber bumper 02-10-01474 plug coupling 02-10-01475 FILTter frame 02-10-01476 Exhaustair filter

02-10-01477 winch

02-10-01478 Timer 02-10-01479 Push button on 02-10-01480 Push button off 02-10-01481 Drying air

thermometer 02-10-01482 Exit air ther

mometer 02-10-01483 safety valve 02-10-01484 pressure gauge ,

atomizing air 02-10-01485 Caster wheels 02-10-01486 Solenoid valve

SPARE PART FOR ( RUSSELL ) MODEL / 804 UNIT NO. / 1694 , UNIT NO. / 1693 DRG . NO. DESCRIPTION

02-10-01487 B13200 FLYWHEEL HOUSING 02-10-01488 C 13204 FLEXIBLE COUPLNG

02-10-01489 H 2036 2 DH MOToR D90LD FRAME STD

02-10-01490 C 13147 COMP. RUBBER BUSH

02-10-01491 D 13213 RUBBER BUFFER ASSY

02-10-01492 C 1053 ST . ST. SHALLOW FUNNEL

02-10-01493 C 664 FLYWHEEL SHAFT 02-10-01494 B 1533 FIYWHEEL 02-10-01495 C14273 TOGGLE CLIP 02-10-01496 H 1012 30 M BALL BEARING ( 30

MM . X 72 MM. X 19 MM . )

02-10-01497 H 1500 160 X RUBBER TYRED WHEEL

SPARE PARTS FOR DIOSNA - MIXER P 600 238 - 058

02-10-01498 ASSEMBIY GROUP DRWG. NO. Pos

DESIGNATION ORDER DESIGNATION

02-10-01499 V- belt - 5 drive , a 238 - 16

Narrow v- belt( I SET ) SPB X LW 2500

02-10-01500 DRIVE 4

PRESSUER RING C 238 - 25 - 04

02-10-01501 KS 2378- 21 13

WORM GEAR CHVW 250 , I= 10

02-10-01502 31 O- RING OR 160 - 5

02-10-01503 34 RADIAL SEALING 180 diameter / 210 X 15 MT 03

02-10-01504 33 o- RING OR 315 -4

02-10-01505 32 o - RING OR 150- 5

02-10-01506 LID 30

SEALING 10X10X 3280 SILICONE

02-10-01507 KS 2651 - 51 31

SEALING 10X10X 480 SILICONE

02-10-01508 SAFETGLID 23 238- 67

SINGle THRUST BALL BEARING 51 104

02-10-01509 27 STRIPPER AS 32 - 45 - 4/ 8

02-10-01510 OUTLET B 250-61 18

STRIPPER SLEEVE 206- 64.09 TEFLON

PNEUMATIC CYLINCLER DF 100 -200 . SI , 53 CONSISTING OF : ACCording tp as 974

02-10-01511 C ROOVED RING N 32-22( 32X48X8)

02-10-01512 PISTON Guide ring p 6D 100

02-10-01513 LIP RING P 42 100 /88X 8,5

02-10-01514 34 o- RING OR 32x3

02-10-01515 ouTLET B 250-61 32

Stripper 225 - 62.30 Teflon

02-10-01516 33 Sealing 10x10x850

02-10-01517 39 Single thrust ball bearing 51104

02-10-01518 43 Stripper As 32x45x4/8

02-10-01519 Pneumatic a 225- 82 50

Servicing unit frc- 1/4s

02-10-01520 45 magnet valve 25 507.08.0771

02-10-01521 52 comperssed air FILTER AND REDUCER LFRN- 1/4 .B

02-10-01522 44 PRESSARE SWITCH 085/680

02-10-01523 47 Check valve R- 1/4

02-10-01524 CUTER 238 - 95 27

O- ring OR 74-4

02-10-01525 28 O- ring OR 55-4

02-10-01526 29 O- ring OR 36-4

02-10-01527 30 RADIAL SEALING B1 42/55/7

02-10-01528 FILTER A 238-55 7

O- ring OR 135X6

02-10-01529 8 FILTER LOSE O/ 125 X 410 Dralon -T- silk

code No.item name & specifaction

descrption Qty.

02-10-01530 ý1 ) UV-VIS spectrophotometer. With Hardwareý

10

ýA: SpecificationýýWave length ýýrange ý190-1100 nm

ýSpectral band ý2 nmýWave length ýýdisplay

ýReadable to 0.1 ýýnm

ýWave length ýýsetting

ý0.1 nm ýýincrements ( ýý1nm increments ýýfor wave length ýýslewing )

ýWave length ýýaccuracy

/-ý+ 0.3 nm ( ýýAutomatic wave ýýlength ýýcorrection )ý

ýWave length ýýrepeatability

/-ý+ 0.1 nmý

ýWave length ýýslew rate

ýAbout 6000 nm ýý/ min

ýWave length ýýspeed scanning

ýAbout 3200 nm ýý/ min . to about ýý160nm / min

ýDate bunching ýýinterval

ýAutomatic ýýselection of 2,1, ýý0.5,0.2,0.1 nm

ýLamp ýýinterchange ýýwave length

ý295 ~ 364 nm ( ýý340 – 8 nm )

ýStray light ýLess than 0.05 ýý% ( at 220 nm ýýand 340 nm )

ýPhoto metric ýýsystem

ýDouble beam ýýoptics

ýPhoto metric ýýrange

ýAbsor bance : ýý0.5 ~ 3.999 AbýTrans mittance : ýý0.0- 300 %sý

ýPhoto metric ýýAccuracy

ý+ 0.004 Abs . at ýý1 Abs ( Tested ýýwith NIST 930 ýýD ýý- filter ) ýý+ 0.002 Abs . at ýý0.5 Abs

ýPhoto metric ýýrepraducibillity

ý+ 0.002 Abs . at ýý1 Absýý+ 0.001 Abs . at ýý0.5 Abs

ýBasline stability ýLess than- + ýý0.001 Abs / ýýhourý

ýBasline flatness /-ý+ 0.002 AbsýBasline ýýcorrection

ýAuto matic with computer memory in two stages of coarse and ýýfineý

ýLight source ý50 w halogen ýýlamp ( 2000 hrs ýýlife ) and ýýdeterium lamp

ýMono ýýchromator ýAberration ýýcorrected ýýconcave blazed ýýhologrephic ýýgrating

ýDetector ýSilicon photo ýýdiode

ýPower ýýrequirements

ý100,120,220,24ýý0,VAC,50/60 ýýHz,160 VA

ýB ) Accessories ýý1-color plotterýý2-screen copy printerýý3-Recorder ý

02-10-01531 ý2- In Fra- Red spectrophotometer ý

5

ý (Fourier Transform infrared spectrophotometer)ý

ýA) Specificationsý

ý*interferometer ý ýMichelson type with 30 degree incidence angle dynamic Alignment .ý sealed ýýand desiccated

ý � Optical system ý ýSingle beam opticsý

ý � Beam splitterý ýGermanium coated KBr plateý

ý � Light soursý ýCeramicýý � Detector ý ýTemperature

controlled high sensitivity detector (DLAGS Detector) ýý# Above 2600 :1 (KRS-5plate ,4cm –1 , for 4 seconds , 2200 cm-1ý

ý � S / N ý ýP- P)ýýThe formula determining the 1 minute S/N from the 4 seconds S/N

accordance ýýwith theory is as follows : ýý (1minute S/N ) = ( 4 seconds S/N)X3.87 using thisýý formula gives of 3200x3.87 =12384ý

ý# Above 3200:1(KBr plate 4 cm –1, for 4 seconds, arround 2200 cm –1) ý

ý( 1 minute S/N obtained by above formula is 12390:1)ýý standard in Europe ýý7800 cm –1 ~350 cm –1 ý

ý � Wave Number range ý

ý0.5,1,2,4.8,16cm-1 / 1,2,4,8,16 cm –1ý

ý � Resolution ý ý3 steps : 2.8 mm/sec , 5mm /sec , 9mm /secý

ý � Mirror speedý ýby He- Ne 7 laserý

ý � Data samplingý ýw200 x D230 mm x H 170mmý

ý � Sample compartmentýý � Data processingý

ý Function ý

ýArithmetic calculation , peak pick, spectrum ýýSubtraction,smoothing , basline correction ,data cut ýý,data correction , normalize , kubelka-munk conversion, ýýkramers – koring analysis , ATR correction,fourier ýýTransform , derivatives , transmittance – absrobance ýýconversio , peak area integration , peak ratio ýýcalculation ,emission correction

, deconvolution, , ýýquantitation , multilinear regression guntitation

ýý,spectrum search , JCAMP conversion ,ASCII ý

ý*optional programsý ýconversion , logarithmic conversion,wave length wave ýýnumber conversion , shift ,along x axisýýPLS quntitation , curve fitting , maping ýýprogram,macroprogram(BASIC)ý

ý � Validation programs ý

ýProvided as standard .ýýThe polystyrene auto-shutter for use in full automatic ýýmode is provided as an optionýýTemperature : 15C0to 40 C 0 , Humidity below 70 % ý

ý ý ýAC 100V/120V /220V /230V/240V,50/60Hz,160VAý

ý � Operation conditions ýý � Required power sourceýý B)Accessoriesýý1) Screen copy printerýý2) Recorderýý3) Automatic sample ýýchanger for ýýtransmission ýýmeasurement ýý(measures 18 samples ýýusing KBr pellets ýýmethod,

0r Nujo1 ýýmethod)02-10-01532 ý3)ION

chromatography system( comprehensive anion

2

analysis ýýand simultian eous determination of mono valent and divalent ýýcations in many matrices ) with its columns ýýConsist of :-ýý*Comprises pump ý

ý*Detector ( 10N chromatography)ýý � Sepration center and novel supperessor ( ion ýýchromatography sepration center- tow channels)ýý*sepration center and novel supperessor ( ýýIONchromatography sepration center – tow channels ) ýý*Auto sampeler for up 128 samplesý

ý*the evalution system allows easy and dependable ýýintegration and storage of chromatograms on apc basis ýýA) Accessoriesýý � Dialysis unit for ION chromatography analysis of ýýdifficult samplesý

ý � Electro chemical detector for ION ýýchromatogrophy and HPLCý

ý � 20 Different type of columnýý � recorder

02-10-01533 ý4) High Performance Liquid Chromatograph ( HPLC )ý

10

ý � LC Micro – volume ýýplunger solvent delivery ýýunit for semi – micro LC ýý � UV-Vis detector 190-600 ýýnm / 900 nmýý � System controllerýý � Refractiv index dectertorýý � Dual plunger solvent ýýdelivery unit for routine ýýuseýý � Photodiode array detector ýý190-800 nmýý � Auto – injectorý

ý � Spector fluor metric ýýdetectorýý � Colum oven from ( ýýambient + 10 c0 ) – 80 c0ýýFrom ( ambient – 10 c0 )- ýý80 c0ýý � Colum oven from ( ýýambient – 15 c0 )- 80 c0 ýý � Resevoir Trayýý � Conductivity detectorýý � On-line degasser with 2 or ýý4 channelýý � Low pressure gradient ýýunitýý � Series valves ý

ý - Reservoir ýýselectionýý - Flow channel ýýselectionýý - Column ýýSwitchingý

ý - Reservoir ýýselection with ýýrinsing pumpýý � Electro chemical detectorýý � Work station systemýý � Auto sampler ýýB ) Accessories :-ý1- All its accessories and ýýcolumnsýý2- Recorder

02-10-01534 ý5- Capillary Gas Chromatograghý

5

ýColumn oven :-1- inner volumeý

ý280wx 280 ýýhx184Dmýým , 14.4 ýýlitersý

ý 2- temperature rangeý

ý( Ambicnt ýý+4C ) ~ ýý450 C ( 1C ýýIncrement ýýSetting) - ýý90C ~ 450 ýýC with ýýoptional ýýcryogenic ýýwork ýýattachment ý

ý ýý-+ 1% of ýýthe set ýýtemp in ýýkelvin unit ýý( temp. ýýcalibration ýýin 0.01 C ýýincrementsýý)ýýLess than 2 ýýC along ýýa200mm ýýdia.circleý

ý 3- Temperature accuracyý

ý0.01C /Cý

ý 4-ýýTemperature ýýnon ýýuniformityý

ý 5-Temperature variation ýýcoefficientý

ýDouble ýýprotection ýýone freely ýýset below ýý450C and ýýthe other ýýfixed at ýý470C ý

ý 6-over heat protection ý

ý5 ( cooling ýýstep is ýýneeded)~ ýýsteps

ý 7-number ýý 8- programming rate setting :ýý n 1000/min in /c/min-stepsýýInjection port : 1-three independently lemp. ý

ýControlled injector units are neededý

ý 2-Temperature range ý

ý~450 C (1C increment setting )ý

ý 3-injection port unitý

ýsplit /splitless injection unit as standard .direct injection ýýunit . on column/ý

ýPTVC/ programmable temperature vaporizer) injection ýýunitý

ý 4-over heat protection ý

ýDouble protection ..one freely set below 450C and the ýýother fixed at 470 Cý

ýAuxiliary heated zones ý

ýOne temperature controlled heated zone ,besides those ýýfor injection ports and detectors+ four temperatures ýýcontrolled heated zonesý

ýFlow control unit : 1-Advanced flow ýýcontroller (AFC)ý

ý *Split /Split Less Modý

ý *Direct injection modeý

ý � High pressure high-flow rate ýýAFCýý 2-Manual flow controllerýý (CFC) ýþ þý*Equipped with aprimary ýýpressure controller and asecondray ýýpr

essure controller ý

ý3-Advanced pressure controller ýý(APC) ý

ýDetector : ýý1-FID ýýdetector ý

ý ýý2-TCD ýýdetector ý

ý ýý3-ECD ýýdetectorý

ý ýý4-FPD ýýdetectorý

ý ýý5- FTD or ýýNPD or ýýTSD ýýDetector

ýDisplay ýý:- ýý1- ýýBýýaýýclýýitýýe ýýLýýCýýD ýý, ýý1ýý6 ýýCýýhýýaýýrýýaýýctýýeýýrs ýý2 ýýLýýinýýesý

ý ýý2- Display ýýitems :- ý

ýTemp . itimes , pressures , and ather parametersý

ý

ýPower rquirements :ý

ý100,115,220,230 or 240 VAC,50/60Hz 1800 VAý

ý B- ýýAýýcýýcýýesýýsýýorýýieýýs ýý 1- ýýWork ýýstation ýýsystem ýýwith ýýRecorýýder ýý ýý( PC ýýwork ýýstation ýýfor G.C ýý)ýý 2- ýýPyrolyzeýýrýý 3- ýýPaked ýýcolumn ýýlnert ýýinorganiýýc gas ý

ý ýýanalysis ýýsystemý

ý 4- ýýAuto ýýinjector ýýand auto ýýSamplerýý 5- ýýHead ýýspace ýýsamplerýý 6- 20 ýýdifferent ýýTypes of ýýcolumns

02-10-01535 ý6 ) Flame photo meter , Digital Model ý

6

ýA ) Specificationsý ý Na equal or less than 0.2 PPMý

ý* Limit of Detection ý

ý K equal or less than 0.2 PPMýý Li equal or less than 0.25 PPMýý Ca equal or less than 15 PPMýý Ba equal or less than 30 PPM

≤≤

≤

≤

≤

ý Reproducibilityý ý< 1% cofficient of variation for 20 consecutiv ýýsample of 10 PPM Na set to read 50.0ý

ýLinearity ýBetter than 2% when concentration of 3 ppm Na ýýand K and 5 ppm Li are set to read 100ý

ýSpecificityý ýInterference from Na , K , Li equal in concemtration to ýýtest element will be less than 0.5 %ý

ýRecorder out putý ýNominal 1V for areading of 100ý

ýServicesý ýFue propane , butane , natural gas or L.P.GýýAir Moisture and oil free 6 liters / minute at 97 kpa ýý14 psiý

ýPower requirementsý ý90 – 125 Vor 190 – 250 V,50/60 Hz , 13 Wý

ý B ) Accessories and spare partsýý1- Air copressor , oil freeýý2- Pure air fillterýý3- Minor spares Kitýý4- Calcium filterý

ý5- Barium filterýý6- Lithium filterý

ý7- Natural gas regulaterýý8- Water separaterý

ý9- Dust coverý 10- Cleaning solution

ýC ) Reogents – Industrial / standards :ý

ýK 1000 ppm ,Li 1000 ppm , Ba 3000 ppm , Na ýý1000 ppm , Ca 1000 ppmý

ý D ) Flame testingý

ý1- Blowpipe bent plated brass , ýýapproximately 200 mm longýý2- Charcol blocks : For blowpipe analysis . ýýApproximately 100 X 25 X 25 mmýý3- Glasses 75X50 mm , cobalt blue , for ýýdetection of patassium in the presence ýýof sodium etcýý4- Rods silica plain , 75 mm long X 1mm ýýdia meterýý5- Wire platinum length 38 mm ,dia meter ýý0.376 mm fused into glass handle with ýý75 mm long

02-10-01536 ý7 ) Potentiometric Titrator ý

6

ý Compact titralor for dynamic and monotonic titrations with

automatic equivalance point deter mination ýýas well as end point titration . and PK value deter minations with electrods , titration stand , magnatic ýýstirrer , printer , sample changer ý

ý B) Accessories :-ý All its Accessoriesý

02-10-01537 ý8 ) Karl – Fischer Titrator for water Determination : ( Volumetric )ý

6

ý1- Compact KF titrator for fast and accurate water determinations .Titration stop either by means ýýof deloy time or by drift criterion . soft ware – controlled polarizer for bi voltametry

and bi – ýýamperometry Backlit LCD screen .ýý2- Titration stand with stirrer and pump , compact titration stand with magnatic stirrer and pump ýýfor addition of solrvents and for siphoning of titration vessel contentýý3- Printerýý4- KF Drying oven

ý B ) Accessories :- ýý All its Accessories

02-10-01538 ý9)PH- Meter . or PH/Ion –Meterý

20

ýA ) Specificationsý

ýRangeý ý-1.999 to + 19.999 PH ýý-1999.9m V to +1999.9 mvý

ý0.001to 199999 ppmýý- 9.9 to 120C

ýResolution ý ý0.01 PH and 0.001 PH ýý0.1 Mvýý0.01 /0.01 and 0.1 ppmýý0.1 C

ýAccuracyý ý+- 0.002 PH ýý+- 0.1mv (+799.9), + 0.2mvýý+- 0.5% ( fs) ppmýý+- 0.5 C

ýTemp.compen staion ý

ýAuto or manual from –9.9 to 120 C – All metersý

ýCalibration ý ý1 or 2 point calibration with 6 ýýmemorised PH buffeuesrs and 5 ýýmemonsed Ion buffers val

ýCalibration storoge GLP

ýýEPROM storge of calibration data and data – All meters

ýPower supply ýý50-60H2 –12 volt power adaptor supplied

ýOut put ýýRs232 Serial interface

ýMemoryý ýý8000 samples

ýB) Accessories ýý1) BNC refillable glass bodied PH electrode ýý2) RS 232 Comms lead and software ý

ý3) RS 232 comms lead and soft ware ý

ý(9 pin female to 9 pin male )ý

ý( 25 pin female to 25 pin male)ý

02-10-01539 ý10- Chloride Meters ( Clinical and Industrial models )ý

4

ý1- Range ýý10 to 999 mg / l cl

ý2- Reproducibility ý+- 3 mg / liter

ý3- Linearity /+-ýý3 mg / liter or + 1% ( which is greater ) over the total ýýrange

ý4- Sample volum ,ml ýý500

ý5- Power Supply ýý110 – 120 v and 230 v,50 –60 Hz 12w

ýB) Accessories ýý1- 200 mg /L standardý2- silver anodes pack of 3ý3- silver electrodes ,one cathode and two ýýelectrodes ý4- vial of electrode polish ý5- Acid buffer 500 mlý6- Gelatin ,30mlý7- Stirrer bars , pack of 10

02-10-01540 ý11- Conductivity Meter ý

4

ý 1- Display ranges ( with cell k=1.0ý

ý4 digit LCD ý

ý MS 0- 199.9ýý 0-19.9ýý MS 0- 1999ýý0- 199.9ýý CO - 50 TO + 150.0C0 ý

ý2- Temperature compensation , c0

ýýAutomatic or manual ( 0-70 )

ý3- Freez display option

ýýYes

ý4- Temp . coefficient

ýý0 to +5 .00 ( x 0.1 ) % / C0

ý5- Cell constant ýý0.05 – 19.99ý6- Accuracy ( electrical )

ýý< 0.5 %

ý7-Out put ýýRs 232 ý8- Temp . probe ýýTPA 100

platinum resitance . user correction ýýup to -+ 2.0 c0

ý9- Electrical supply

ýý110- 230 V,50 – 60 HZ , 6 w max

ýB – Accessories ýýAll its Accessories

02-10-01541 ý12- Melting Point apparatus with CCTV Cmer a kit ý

6

ý 1- Temprature range c0

ýýNot less than 400 c

ý 2- Resolution c ýý0.1ý3- Measuring accuracy

ýýUp to 100c +- 0.3 cýýUp to 250c +- 0.5cýýUp to 400c +- 0.8c

ý5- Heating times 50c to 350 c

ýý+- min approx

ý6-Cooling time 350 c to 50c

ýý10 min approx

ý7- Data out put ýýRs 232 cý8- power supply ýý220 v , 50-60Hz

, 200 W

02-10-01542 ý13-Muffle Furnaces ý

10

ý Max temp. c ýý1600 c

ý Volume liters ýý15 Lý Electrical supply

ýý415 v ,50 – 60 Hz 3 phase

02-10-01543 14- Oven ý 15ýRange ýý50-500 CýCapicity ýý30 literýFeatures s.s interior and electronic control

ýý

ýLarge area grid shelver , control by direct reading thermostate ,the outer shells steal and the ýýinner is Aluminium

ýý

02-10-01544 ý15- Portable Digital Thermometer ý

10

ýA) Specificationý Range - 50 c to + 150 c water resistant propeý Display control with battry , with colloidal quaphite pack

02-10-01545 ý16- Thermometer mercury in glassý

10

ý Range 10- 100 c , 10-200 c , 10-300c ,10-400cý

of each

02-10-01546 ý17 – Maximum Thermometerý

30

ý* 1T resemble the ordinary clinical ther mometer but its temp . is more extended fitstarts frome ( 70 – 150 ) cý* 1T resist high temp . and breaking during sterilization and shaking

during entering the auto claveý* The maximum temp . that is reach remain stable with out shaking

ý* The numbers marked on the ther mometer must be stable to the high temp

ý* The level of mercury must be continous with out any cutting

02-10-01547 ý18 ) Hydro meter Nafloc – Patterný

10

ý For deter mination of dissolved solid in boiler and similar water

according to the nafloc method with ýýpolished metal bulb and scale calibration 0.998 to 1.01 in 0.0002 . subdivison maximum

diameter 41 mm , ýýlength 280 mmý

02-10-01548 ý19 ) Maximum and Minimum thermometer ý

10

ýWall mounting mercury in – glass ther mometer , with two markers , mounted on adual scale – 30 to 150 ýýC x 1 C and 20 to 120 X 2 Fý

ý Designed for horizantal mounting and reset by swivelling the frame to the vertical position . overall length ýý235 mm , in plasti frame with instructioný

02-10-01549 20 ) Membrance ý 1000ý * Special type for microbiologicalý * Pore size 0.45 mý * Cellulose nitrate with black ground

02-10-01550 ý21 ) Polarimeter : ( Automatic precision polarmeter with ýýoptical null principle by rotatio

10

of the analyzer automatic ýýgain control )ý

ý* Radiation : HG-High-Pressure lamp ,Na spectral ýýlampý

ý* Spectral lines :Selectable from instrument keypad :

ýýNa 589nm , Hg 578nm , Hg 546nm , Hg 436nm , Hg ýý365nm , four spare position for additional optional ýýfilters

ý* Apertures :Selectable apertures for standard cells and ýýmicrocells ýý* Detector : Photo multi plier 1P 28 Aý

ý* Polarizer and analyzer : UV-transmitting colcite ýýGlan prismsý

ý*Rotary range: ý+- 850ý*Balancing speed : ýý1.3 0 /s at 50

Hz ,1.5 0/S at 60 Hz

ý* Accuracy ýý+- 0.0020 for rotation<- 10,+-0.2% for rotations>ý 10

ý*Repraducibility ýýBetter than 0.002 ( for zero and rotational reading)

ý*internal angular resolution

ýý1x10-40

ý* integration times ýý0.1s,0.2s,0.5s, ,1s,5s,10s,20s,and 100s.

ý* Autozero setting ýýElectronically from instrument keypad at any desired ýýpostion in the rotatory range

ý* User interaction ýý* User interaction : menu –driven from integrated ýýtouch keys ( multilingual)

ý* display ýý* display : vacuume fluorescence disply , two lines ýýwith 20 characetrs each.

ý* format of results ýý* format of results : selectable from instrument key ýýpad , any ular rotation , specific rotation , molar ýýrotation international sugar scale , as well as user – ýýdefined factor and offset

ý* Printer out put ýý* Printer out put : standard parallel printer port ( ýýcentronics port)

ý* data input ýý* data input : inpuit port for intermec 9720 barcode ýýreader and /or standard PC/AT kepboard

ý* communications ýý* communications : RS-232C serial ýýinterface , selectable bau

. d rate and communecation ýýparameters range, out put voltage 0 to 10mv , 100 ýýmv and /v

ýAralog output : ýý � Aralog output : digital –to – analog converion ýýof angular rotation for the connection of ýýchartrecordsrecording rangesýý+-50 , +-5 ,+-0.05 , resolution 0.1 % of range ý

ýwideh, cyelic repeatability in all ranges +ýý50, + 5 , + 0.05

ý , resolution 0.1 % of range width , ýýcycl ic repeataability in all ý

ý* External “Ready”: ý

ýRelay contact closure ( normally open) ,signal floating ýýmaximim load 110v ,0.3 A A C, actvated by print ýýsignal ,selectable delay and duration

ý* External autozero :

ýýExternal activation of autozero function , TTL siignal ýý, low acttive

,or contact closure , duration 100 ms ýýminiumum

ý* temp sensor : ýýPT- 100 temp. sensor for sample cells , temp .range ýý– 23C to + 198C

ý*Power supply : ýý90 to 132 VAC or 190 to 264VAC , 50+-0.5 Hz or ýý60+-0.5Hz ,200 VA

ýB) Accessionsý 1) recorderý 2) printer

02-10-01551 ý22- Coulter Counter ( Partical analysis system )ý

6

ý* Direct read out of paricle size

ýý

ý* Total count of large partical with repact of size given

ýý

ý* Printer woeking range with respect partical for 2 – 25

ýý

ý* Thrie shdel : ýý0- 99.9 0 division

ý*Timer range ýý10ms –655sec

02-10-01552 ý 23) Viscometerý 5

ý � Stirring motor and paddleýý � Turntable controlýý � Boost heatersýývariable autogransformerýB) Accessoriesý � contoct thermometerý

10-100C

ý � Colling Coilýý � Cover For Turn tableýý � Stope Watch

02-10-01553 ý24) Dissolved Oxygen meter ý

24

ýD02 range ýý0 to 1.99 %ýResolution ýý1 %ýAccuracy ýý+- 2% 10C Of

calibration temp

ýTemp. ýý- 10 to + 60 C ýResolution ýý0.1 C ýAccuracy ýý+- 0.5 C

02-10-01554 ý25) Stoinless steel filtration ý

10

ýWith lid funnel capacity 500 ml base clamp, filter diameter 50 mmý and ýýmainfold PTFE ,Gasket Silicon sealing ring in /id

ý26) Masses for Generalý

2 set

02-10-01555 ý* General purpose with aluminium fraction ýý ýýý* Range of mass ýý0.1 mg .. 100gm

ý* In wooden box ýý

02-10-01556 ý27) Tape Ahesive Indicator 3M :-ý

250 rol

ýAuto clve color change sterilization tape with steam sensitive

ink in 55m rolls color changes ýýfrom white to dark brown

, on 20 min . exposure at 121 C ý

02-10-01557 ý28) Atomic Absorption spectrophotometersý

4

ý* optics ýýDouble beam ( chopper mirror)

ý* Monochromator : ýýabration corrected czerny- turner ýýmonochmator Halographic gratingýý( 1.600 lines /mm)

ý* wave length range ýý190-900 nm auto mated wavelength ýýselection

ý* slit ýý0.2 nm , 0.7nm manual setting

ý* Backgrownd correction

ýýD2 - Lamp method

ý* Lamp . Turret ýý2-Lamps simultaneously lit ( manual ýýturret)

ý* Lamp mode ýýEmission , non- BGC, BGC-D2

ý* Frequancy ýý100 H zý* Nebulizer ýýNebulizer

integrated impact bead and jackt ýýtip pt/ ir capilary

ý* champer ýýPoly propyleneý* Burner ýýFixed back /

forward postion and burner ýýhight ( simply switching of Air/ C2H2 and ýýN2O /C2H2 burner)ýýTitanium 10 Cm slot barner ( optional high ýýtemp . burner )ý

ý* Gas control ýýManual setting of flow rateýýAutomatic Air/ N2O switching system

ý* safty : ýýgas pressure monitoring to prevent ýýflashbackýýAutomatic flame monitoringýýSafty inter lock for misuse of burner ýýAutomatic flame extinguish when power ýýfailure

ý* lgnition : ýý Push ignition button

ý* soft ware : soft ware based on MS- Windows TM

ýý

ý* power supply : ýýAc 220 v,230v,50/60Hz, 300Va

ý* Ambient temp . and humidity range

ýýTemp. 10~35 C 0Humidity 45 ~80% (less ýýthan 70% when tem

p. is greator then 30C )

ý*Standard accessories ý

ýBurner Head of 10 cm slot Nebulizer ýýassembly. Deuterium Lamp drain tube ýý.teflon tube for sample suction .Hose ýýassembly for C2H2 ,hose band ,

RS-232C ýýconnection ýýAssemply for air . hose assemply ýýTO C2 H2 , HOSE BAND ,ýýRS – 232 connection .ýý cable ( 9P-9P) Ac cable for 220,230vý

ýB) Other Accessoriesýý � auto samplerýý � recorder .ýý � Hydride vapor Generatorýý � Mercury vaporizer unitýý � High temp Burner headýý � All perdic HCL with its st solutionýý � Drain separator ýý � Compressed gas Regulator for C2H2ý

ý � Compressed gas regulator for N2Oý

02-10-01558 Ambulance with the following specification :- *Truck according to years 2001-2002 specification models with petrol engine water - cooled

*Emergency waening system supplied ( siren with speaker and beacon). * Air conditioning (cooling and heating).

* Gearbox (5) speed manual. * Details of standard medical equipment:- 1. Oxygen bottles 500 litter capacity within the left wall cabinetry.

2. Spare oxygen bottles 500 litter capacity in storage cabin. 3. Plastic Nasal canulas – adult. 4. Oxygen catheters , two of each no. 10F 5. Mouth – to – mouth ventilation mask, sussex, air way (with long & short air way ). 6. Port able oxygen kit complete with regulator and supplies.

7. First aid kit contents.

A box is be provided containing the following:-

* Twenty pre-localized pads.* Twelve compressive bandages.

* Four 10 cm elastic strips.* Six gauze bandeaus, three of 75mm and three of 150mm. * Twenty gauze pads 10cm by 10cm, individually wrapped.* Two 5cm anti-allergic rolls of adhesive tape. * Fifteen tongue depressors individually wrapped. * One 100 ml bottle containing chlorexidine base disinfectant. 8. York II stretcher trolley complete with mattress, cover, locking device & quick release patient restraints.

9. Wheel stretcher with adjustable back aand foot rests with side handles,

complete with mattress and cover.

10. Oxygen masks, one for each adult child and infant.* Necded optional medical equipment.* All needed catalogues in English.

* Spare parts for 3 years.* Aside door : side door at right side.

* Back doors: two panel doors open able to the sides.

02-10-01559 Plastic Bottle: 3 unit Fully automatic injection -stretch -blow moulding machine for production of (PET) bottles with the

following capacity:-

Volume of the bottle: 1-125 Ml 2-150 Ml 3-300 Ml 4-1000 Mlcapacity : 1-25 Million / years

2-10 Million /years

3-3 Million/years 4-2 Million /years *All needed optional and aaccessories equipment

to put the machine on production.*The voltage for the machine must be

3 pH,380 V,50hZ+N+E*Loadless testing saftey prevention measuers instruction and saftey plates.

*spare parts for 2 years *Aletter of guarantee for a period of 12 months.

*Break down prices for (supplied machine , errection

and commissioning ,maintenance,installation, induestrial

services inside the rooms (cables,chilled water pipes,compressed air pipe…Etc.)and training for technical of medical staff.*All needed catalogues and operating manuals in

English must be sent with the offers.

*All needed information ,specification for the said machine and equipment.*Raw materials for production for six monthes

02-10-01560 Set of 10 cavittes injection and blowing moldes for

2 sets

production of prefforms and bottles with the following specification :- a-Injection mould . b-conditioning group.

c-Stretching group. d-Blowing mould.

spare parts for 2 years

02-10-01561 set of mould suitable to produce bottles

2 set

size 300 ml and 1000 ml for production of preforms and

bottles with the following specification and capacites:-A- injection mould.

b- conditioning groupc- stretching group

d- blowing mould.capacity 2. 300ml 3million lyears

02-10-01562 line for PET loading and Dehuumidifying with the following

3 line

specification:- A)Dehumidifier:- *capacity 50 kg/hr *Air delivery 270 Mc/h *Dew point -50 C *Installed powers 25,5 Kw *To be feeded withh chilled water.

B)Insulated hopper.

*Capacity 250 Litter *Inox steel C)Automaatic hopper loader *Vacuum loading

*installed power 1,5 Kw.

02-10-01563 Line for high pressure air 40 BAR -480Nmc/h

1 line

with the following :-

A)oil free compresser: *Inlet air pressure atmospheric *Max delivers pressure 40 bar *Flow rateat 40 bar 480 Nmc/hr *Installed power 120 Kw.B)water cooler with circulating unit

C)final cooler for compressed air.D)2000 litters air tank with safety valve E)compressed air dryerF)final fillter

02-10-01564 Mould /conditioning temperature

3

regulator with the fiollowing specification:*Range of use 40-120 C*heating power 6 Kw*cooling power 14.000 Kcol/hr.to be feeded with chilled water

02-10-01565 Mould AREA air conditiones, chemical adsorption device ,

3

Fiber glass rotor with silicagel :-* proscess air flow rate 270 mc/hr* cooling powers 3800 frig/hr* Installed power 3.1 kw .

* to be feeded with chilled water .

02-10-01566 Closed loop water chiller .

1 unit

*condensation without water consumption*Reciprocation pistons and orbiting spiral compressor.

*thermally insulated tank included .

*complete with electric board and control in struments.* Refrigerant cycle gas (any kind exepl- R22 )*nominal refrigerant power 130,000 - 135.000 frig/hr

*outlet water temperature 12C’

installed power 58 kw .complete qualty control Eqmipment and all auxiliarys equipment .complete warkshope

packing & packaging

Capsules Capsule Type Snap fit Capsule

02-10-01567 Empty gelatin capsule size 0 printed .

500 m

02-10-01568 Empty gelatin capsule size 1 printed

500.000.000 cap

02-10-01569 Empty qelatin capsule size 2 printed .

50 000 000 cap

N.B/ 1-5000 Capsules sample of each size is required for evaluation2- For exact color & printing sample will be sent to the buyer upon it’s request .

3-Capsules to be protected by paper / polyethlene bags packed in a strong double corrugated carton .inner sides lined with trays of styropore foam , outer sudes wall laminated with wax lamination .4-Shipment and transportation should be effected in refrigerated trucks ,to insure safe arrival and quality .

Oral Drops02-10-01570 1-Glass bottle

droppers ,15 ml round amber bakelite

15.000.000

18 mm, (drawing no .SDI-18) Art no 73413 .

02-10-01571 2-Internal plastic droppers art .no B 1810-1

15.000.000

02-10-01572 3-White Bakelite cap (Art no . Li810)

15.000.000

Specifications:GlGlass bottles to be from glass type III

GlGlass bottles should meet the limit test of alkalinity (Analytical certificate is required).3-Transmission of light & chemical resistance of amber glass bottles & specifications to be according to USPXXI.4-Bottles :Finish 17.4 mm, capacity 15 ml ,weight 31-35 gm body diameter 27.8(+0.5, - 0.5 )mm

5-Bottles to be arranged as 195(13x15)pcs/pack ,6 packs/layer 18 ,layers / palette ,(21060 pcs /pal)packs with finish upside down .

6-Palette :dimensions 1200/800 , height 1400 mm weight 690 kg.

7- Covering : 10 pcs pads in between each 2 layers

1195x795( dimensions 9 pcs trays with 1195x795x100 mm in dimensions arranged on the bottom, then on

the 3,5,7,9,11,13,15,18, layer .Totally covered by double plastic foil 2120/1900/0.25

Shrink wrapped & stripped, labels with all in formationsTo be stacked on outer sides.Plastic dropper & Bakelite cap:Each kind to be packed in a well closed nylon sac of 1000 pcs & each 2 saces packed in a strong worthy export corrugated card board carton in non return shrink warp palette,with large outer labels on cartons& palettes with all in formations & quantities inside .

02-10-01573 Glass Bottle Dropper 10.000.000

Glass bottle droppers 15 ml , round ,amber finish 18 mm(drawing no . 7B809)

Specifications:1-Glass bottles to be from glass type III2-Glass bottles should meet the limit test of alkalinity (Analytical certificate is required).3-Transmission of light & chemical resistance of amber

glass bottles & specifications to be according to USPXXI.

4- Bottles :Finish 19.4 mm, capacity 15 ml ,weight 19-21 gm

body diameter 26-27 mm height 56.7 – 57.7mm .5-Bottles to be arranged as 221 pcs/pack (13x17) , 6 packs /layer ,19layers/palette (25194 pcs/pal)packs

with the finish upside down .6-Palette: dimensions 1200/800 , height 1320 mm weight 550 kg.7- Covering : 10 pcs pads in between each 2 layers with

dimensions 1195x795 mm 10 pcs trays with 1195x100 mm dimensions arranged

in the bottom, then on the 3,5,7,9,11,13,15,17,19 layer .Totally covered by double plastic foil 2120/1900/0.25

Shrink warped & stripped , labels contains all the In formations To be stacked on outer sides.

02-10-01574 Un graduated glass dropper , composed of glass tube ,

25.000.000 unit

Black butyl rubber leucolene teat, black Bakelite cap.18mm & must be assembled

1-Glass dropper to be from glass type III2-Glass droppers to fit with glass bottle dropper 15 ml

finish 18 mm ( drawing no. SDI-19 – improved ) .3- Enclosed samples of glass droppers to be supplied

accordingly .4-To be packed in a well closed nylon sac of 1000 pcs &

each 2 saces packed in a strong worthy export corrugated card board carton in non return shrink warp palette , with

large outer labels on cartons & palettes Contained all in formations with quantities inside .

02-10-01575 Eye drop glass bottles

25.000.000 unit

Glass bottles dropper 12 ml round amber ( drawing no.SDI – 22 N)

Specification :1-Glass bottles to be from glass type III2-Transmission of light & chemical resistance of amber

glass bottles &all other specifications to be according to

USPXXI.

3-Bottles : Finish 17.05 mm, capacity 12ml ,weight, 23-25 gm ,body dimensions 24.5-25.5 mm height:

60.5-61.5 mm4-Bottles to be arranged as 255 pcs/pack (15x17) , 6 packs /layer ,18 layers/palette (27540 pcs /pal) packs with the finish upside down .5-Palette: dimensions 1200/800 , height 1360 mm weight 700 kg

6- Covering : 10 pcs pads in between each 2 layers with

dimensions 1195x795 mm, 9 trays with 1195x795x130

mm dimensions covering outer sides of the palette .

Totally covered by double foil 2200/1900/0.25 Shrink warped & stripped ,labels contains all the in formations To be Stacked on the outer sides.

02-10-01576 Un graduated glass dropper for 12 ml glass bottle dropper , composed of

10.000.000

Un graduated white bent glass Enclosed samples of 100 sampled glass bottle with

Droppers is required . Samples of 200 sampled glass droppers is required

For evaluation . To be packed in a well closed nylon sac of 1000 pcs & each 2 saces packed in a strong worthy export

corrugated card board carton in non return shrink

warp palette , with large in non return shrink warp Palette , with large outer labels on cartons & palettes Contained all in formations with quantities inside.

02-10-01577 ALUMINIUN\M TUBES 10.000.000 tubeA-Aluminum tubes 13.5x70 mm cylindrical printed in Two colors internally lacquered with plastic

Ophthalmic nozzle pick & membrane orifice with ring

For (Pfizer type)Specifications:1-The tubes must contains gasket ring made of latex 7 mm wide & should be fixed in side the tube approx

2mm (+1,-1 mm) from the tube end & should have

a constant thickness of 0.02 – 0.025 mm

2-The specification of Alum .tube & internal lacquer to be

according to British standard ,analytical certificate is required .3-Tubes to be packed by I,W,K,A Cartooning machines

type carton KKI.

4-Tubes to be packed in corrugated cartons without

divisions of 250 pcs/each & repacked in wooden cases

with outer side printed with all in formations & quantity in side, Inner sides carton dimensions : (length 293 x width 148 x height105mm)5-In addition assembled thin carton divisions is needed & to be used inside the above cartons for packing 200 tubes of the finished product , the division are with the following dimensions: a- Partition with 15 slots size 290 x 65 mm

b- Partition with 9 slots size 140 x 65 mm .Each 19 partitions of size (140 x 65 mm) & 9 PartitionsOf size (290 x 65mm) to be assembled together in one division ( set) .

6- Packing:- Each 100 sets (assembled divisions) to be packed in a worthy export strong corrugated carton &

Palletized , large in formation lable on the carton outer Side is needed .

02-10-01578 B-Aluminum tubes 19x100 mm cylindrical printed in

30.000.000 tube

Two colors internally lacquered for skin oint. & creams (medical) use with orifice membrane & white caps with punctured thorn .Specifications& packing :1-The tubes must contains gasket ring made of latex 7 mm wide & should be fixed in side the tube approx

2mm (+1,-1 mm) from the tube end & should have a constant thickness of 0.02 – 0.025 mm

2-The specification of Alum .tube & internal lacquer to be

according to British standard ,analytical certificate is required .3-Tubes to be packed by I,W,K,A Cartooning machines type carton KKI.

4-Tubes to be packed in corrugated cartons approx. dimensions :

(length 315 x width 250 x height125mm)

using divisions in between alum.tubes for separation & repacked in wooden cases ,All necessary in formations & quantity to be printed on cartons & the box in oute sides .

02-10-01579 C- Aluminum tubes 22x115 mm cylindrical printed in Two Color

25.000.000 tube

Internally lacquered for skin Oint . & creams (medical use) with orifice membrane & white cap with punctured thornSpecifications & packing :1-The tubes must contains gasket ring made of latex

7 mm wide & should be fixed in side the tube approx

2mm (+1,-1 mm) from the tube end & should have a constant thickness of 0.02 – 0.025 mm2-The specification of Alum .tube & internal lacquer to be according

to British standard ,analytical certificate is required .

3-Tubes to be packed by I,W,K,A Cartooning machines type carton KKI.

4-Tubes to be packed in corrugated cartons approx. dimensions :

(length 315 x width 260 x height125mm)

using divisions in between alum.tubes for separation & repacked in wooden cases ,All necessary in formations

& quantity to be printed on cartons & the box in outer sides .

02-10-01580 Glass bottles 125ml finish 28mm round amber

50.000.000 bottle

Specifications: 1-Glass bottles to be from glass type III .2-Glass bottles should meet the limit test of alkalinity

(Analytical certificate is required).3-Transmission of light of amber glass bottles should be

according to USPXXI. Bottle Packing : to be arranged as 63 pcs/pack(7x9) 6 packs/layer. 9 layers /pal (3402 pcs/pal), packs with

the finish up side down in separately shrink wrapped quantities . Palette size 1200/800 mm , height : 1330 mm Weight : 375/ 410 kg . 5-Covering One pad on bottom with 1195x795x795 mm dimensions , 9 trays on all layers covering outer sides

of the palette with 1195x795x100 mm dimensions . Totally covered by double plastic 2400/1900/0.25 Shrink warped & stripped , labels contains all the in

Formations To be stacked on the outer sides.Glass bottles 125 ml , finish marked to 100 C.C 28 mm , round , amber.

20.000.000

Specifications: 1-Glass bottles to be from glass type III round amber .

2-Glass bottles should meet the limit test of alkalinity (Analytical certificate is required).3-Transmission of light & chemical resistance of amber glass. glass bottles should be according to USPXXI.

4-Glass bottles to be packed with finish up side down in a separately shrink warped quantities, arranged in Layers separated totally by pads & trays covered in Between layers & the outer sides on totally nylon Shrink wrapped palette5- Glass bottle to be marked to 100 c.c for suspension .

6- labels contains all above information to be stacked on

VIALS Glass bottles, 10ml vials , white , round finish 20mm ,used for packing Antibiotic powders.

Specifications & Packing :-

02-10-01581 A-Glass bottles to be packed in corrugated trays of 240pcs

20.000.000 vials

& arranged in layers totally covered with the outer palette .sides by corrugated trays on a totally double layer polyethylene of 0.4 mm thickness shrink wrapped palette . - Large outer labels printed with all above in formation to be stacked on palette .

75.000.000 P c s .

02-10-01582 B-Glass bottles(vials) are used for packing antibiotic Powders made from glass type III which should meet the Limit test of alkalinity & chemical resistance of glasses

According to USPXXI( analytical certificates is required) - Samples of 200 G.B is required for evaluation .Aluminum Sealing

02-10-01583 A-Aluminum Cap pilfer proof ,28 mm , whit color printed

20.000.000 Pcs

In One color according to DIN 60945 (28x18mm)Specifications:Thickness of alum .cap to be 0.23 mmThe points between caps & it’s ends must be proper to open the cap easily after closing

according to the standard torque force for each .3-The pad to be 2.4 mm thickness & well fitted to the caps

To ensure no separation .

02-10-01584 B-Aluminum caps for antibiotic vials ,high 8 mm

20.000.000 Pcs

,thickness 0.22 mm(-0.2 , +0.2 mm) diameter 20 mm

(Group 13 DIN 266-BM2-13) - Samples of 5000 pcs is required for evaluation

Self Adhesive labels

02-10-01585 1- Pharmaceutical labels printed in two colors 70gm of self

30.000.000 Pcs

adhesive roll size 40 x 80 mm to be used on nor print machine . the distance between each 2 successive labels is 2.5mm Each roll contains 9000-10000 labels . Foil direction (foil winding ) is anti –wise direction . Roll core diameter is 70-75 mm One roll sample is need .

02-10-01586 2- Pharmaceutical labels printed in two colors on self

75.000.000 Pcs

adhesive paper roll size 22 x 52 mm to be used in C.E.

King machine model collimate 70.

the distance between each 2 successive labels is 2.5mm Each roll contains 9000- 9500 labels . Labels to be suitable for sticking on siliconized outer Surface treated glass bottles . One roll sample for evaluation is need .

Label reel to be used for self

adhesive Automatic labeling m/cs ‘ Neri machines ‘ the distance between each 2 successive labels is 3mm label dimensions = 80 mm long x 40mm height reel max .diameter = 250-300mm reel core diameter = 70-75 mm

fail un winding to be clock wise direction .

labels to be from out side of the foil reel and in the position.

- One roll sample is need

Special inks to print over p.v.c

bags (According to 1.C.I, Bermann cod No.)

02-10-01587 Red K20 100 liter02-10-01588 Green K40 100 liter02-10-01589 Blue K31 100 liter02-10-01590 Black K65 50 liter02-10-01591 Yellow K10 25 liter02-10-01592 Terriquaze

K3435 liter

02-10-01593 Violet K37 10 liter02-10-01594 Marrone K23 10 liter

02-10-01595 Brown K50 25 liter02-10-01596 Gray 25 liter02-10-01597 Pink 15 liter02-10-01598 White 75 liter02-10-01599 13-Orange K15 15 liter02-10-01600 ink for printing

machince - special - stempel r 9

20 liter

Solvent for the inks above

02-10-01601 1- Solvent KVS 500 liter02-10-01602 2- SOLVENT KVB 100 LITER02-10-01603 3- Solvent KD 50 liter

Glue02-10-01604 1- Strunck –col –S 3000 KG 02-10-01605 2-Strunck –col-N 20 000 KG

Flex graphic 02-10-01606 (thermal resistant

ink)25 liter

02-10-01607 blue color 25 liter02-10-01608 Black color 25 liter

02-10-01609 Red color 300 liter02-10-01610 Solvent for the flex

graphic ink 300 liter

Non Toxic p.v.c sheath

02-10-01611 105 / 0.35 mm 200 Ton weight of roll 14 – 15 kgCore diameter 110 mm

Acceptable foreign particle seen under polarized light 3% max

02-10-01612 P.V.C tube 10 Ton 6.3 – 7.9 mmweight of roll 4-5 kg Core diameter 170-180 mm

02-10-01613 Stopper for I.V solution bag special macrolon stopper

8.000.000

T.N.C.A 500 pcs or 1000 / sealed P.E bag 5-10 bags in carton box .

PACKAGING REQUIERMENTS & SPECIFICATIONS

ALUMINIUM FOILHARD TEMPER,PLAIN, SILVER ALUMINIUM FOILS FOR PHARMACEUTICAL PACKAGING (CAP& TABLET) . 20-25 MICRON THICKNESS , DULL FOIL SIDE COLOURLESS UNPRINTED, LAMINATED

WITH 30 gm/m2 P.V.D.C , REEL DIAMETER 70-75 MM

02-10-01614 A- WIDTH 230 MM 500.000meter02-10-01615 B- WIDTH 198 MM 1 250.000meter02-10-01616 C- WIDTH 135 MM 100.000meter02-10-01617 D- WIDTH 150 MM 100.000meter02-10-01618 E- WIDTH 189 MM 2 000.000meter02-10-01619 F- WIDTH 205 MM 2.500.000meter02-10-01620 g- WIDTH 157 MM 2 500.000METER02-10-01621 H- WIDTH 165 MM 2.500.000METER02-10-01622 I- WIDTH 221 MM 1.250.000METER

02-10-01623 J- WIDTH 130 MM 3.000.000METERN.B./ IT IS NECESSARY TO INDICATE :SPECIFICATION OF THE ALUM FOIL (PLAIN).

KIND AND QUANTITIES (WT/M2) AND CONSTITUENT OF THE LACQURED METRIAL USED WITH ALL TECHNICAL DATA INCLUDING THE RECOMMENDED SEALING TEMPAND THE

STORAGE CONDITIONS AND SHELF LIFE .

3- APPROVAL FOR ITS USED IN THE PHARMACEUTICAL PRODUCT’S.4-ONE ROLL SAMPLE IS REQUIRED FOR EVALUATION .5- EACH ROLL TO BE WARPPED WITH SACK POLYETHYLENE ANDTO BE PACKED IN ASTRONG WOODEN CASES WITH WOODEN BAR INSIDE OF EACH 2 ABOVE REEL .

P.V.C. RI RIGID P.V.C SHEETS PLAIN TRANSPERANT , COLOURLESS THER-/MOFORMABLE FOR BLISTER OF PHARMACEUTICAL PRODUCTS LAMINATED WITH PVDC 40 gm/m2 SUITABLE

FOR SEALING AGAINST LACQUERED ALUM .FOIL, THICKNESS 250 MICRON , CORE DIAMETER 70-75 MM :

02-10-01624 A- WIDTH 240 MM 500000 METER

02-10-01625 B-WIDTH 208 MM 600000 METER 2-RIGID P.V.C SHEETS, PLAIN , TRANSPERANT COLOURLESS THERMOFORMABLE FOR BLISTER OF PHARMACEUTICAL PRODUCTS (CAPSULES ,TAB & COATED TAB) SUITABLE FOR SEALING AGAINT

LACQUERED ALUMINIUM FOIL, CORE DIAMETER 75-76 MM ,

MAX OUTER DIAMETER 400 MM ,250 MICRON THICKNESS :-

02-10-01626 WIDTH 207 MM 2500000 meter

02-10-01627 WIDTH 191 MM 2000000 meter

02-10-01628 WIDTH 159 MM 2000 000meter

02-10-01629 WIDTH 167 MM 2500000 meter

02-10-01630 WIDTH 223 MM 2500000 meter

02-10-01631 WIDTH 159 MM ORANGE COLOUER.

25 000 meter

02-10-01632 WIDTH 159 MM Whit opic

25 000 meter

02-10-01633 WIDTH 251MM 400 Miron thichness

150 000 meter

02-10-01634 3- RIGID P.V.C sheets plain , white colour

500000 meter

thicknes 0.4 mm ,width 130 mm core diameter 70 mm max . out side reel diameter 400 mm

( container for vials ) N.B/ ONE SAMPLE ROLL IS NEEDED FOR EVALUATION .PACKING/ REEL TO BE WRAPPED WITH BLACK

POLYETHYLENE &TO BE PACKED IN ASTRONG WOODEN CASES OF 8 REEL WITH A WOODEN BAR INSIDE THE CORES OF EACH 2 ABOVE REEL .

( GLASS TUBES SPECIFICATENS )

1- Glass tube ( class ) in compliance with ( DIN ) speceficatien NO. 58377 to produce a medical class Ampouies .

2-This Tube is closed fram both sides but there is a small opening a side ( clia .1.8mm ) at the upper for air exit the tube length is apprx . 1500 mm .

3-Each 300 tubes paclked togathes in a tigtly covesd with P.E. Thicknek 0.1 mm 4-Each 54 packages paeked togathes ( capacity 300 tubes in pallett its base consins of ( 6) packages height of ( 9) packages and put on awoodem base this pallet is covered with (p.e.) firstly thickness

( 0.2mm ) then covered with hard cartoon ( beublu carrugated ) then to be cavered with athick p.e. ( thichnes 0.2 mm ) ( 6) packages height of ( 9) packages and put on awoodem base this pallet is covered with (p.e.) firstly thickness

( 0.2mm ) then covered with hard cartoon ( beublu carrugated ) then to be cavered with athick p.e. ( thichnes 0.2 mm ) 5-To put a thick castoon ( double cossugated ) hougentaly between the packages of pailet for sakty avoied bsakage / bseakage .

Des. Colour Length fused ends mm Outerdin mm Wall –Thick ness mm

02-10-01635 Class Tube Class ( 1 ) Amber 1500 10.75 -+ 0.13 0.50 -+ 0.02

114000

02-10-01636 Class Tube Class ( 1 ) Trans parent colour less)) 1500 10.75 -+ 0.13 0.50 -+ 0.02

114000


38000


38000


16000


16000

premould P.V.C sheets printed in one colour for suppositories .

02-10-01641 A. printed 2 gm supp.

500 000 meter

(Trade Name ) on each supp.( composition ) between two supp.printed colour : panton

02-10-01642 B. printed 1 gm supp.

500 000 meter

(Trade Name ) on each supp.( composition ) between two supp.printed colour : panton

P.V.C PREMOULD SHEET FOR SUPPOSITORY 1 GM

Specification :-1. P.v.c fda grade

2. I.R test to be pass.3. Width of promould sheet 42.7 mm 4. Outer real diameter mao 50 cm .

5. White opaque colour .6. Each meter should contains 56-57 covities N.B: Suppository filling M/C Dott. Bonapace and co. Milano/ITALY CONDITIONS :-1. Analytical certificate from the suppliers must be submitted and saniticated by high authorities .2. Marks . Manuf. , Batch No. to be mentioned .Storage condition :-

Temp. N.M.T. 45 C Humidity N.M.T. 65 R.H

P.V.C PREMOULD SHEET FOR SUPPOSITORY 2 GM

Specification :-1. P.v.c fda grade

2. I.R test to be pass.3. Width of promould sheet 52.0 mm 4. Outer real diameter mao 50 cm .

5. White opaque colour .6. Each meter should contains 56-57 covities N.B: Suppository filling M/C Dott. Bonapace and co. Milano/ITALY CONDITIONS :-

1. Analytical certificate from the suppliers must be submitted andSIGNEDby high authorities .2. Marks . Manuf. , Batch No. to be mentioned .Storage condition :-

Temp. N.M.T. 45 C Humidity N.M.T. 65 R.H

02-10-01643 Foil for oral rehydration solt

1 000 000 meter

printed foil used for pharmaceutical preperations of oral rehydration salt made of paper 40g/Aluminium 9 micron (24g)polyethylene 40 g/m2 - widith 322 mm - core diameter 76mm - max . Outer diameter 250 mm

GLASS BOTTLES Glass bottles 8.5 ml round amber ( drawing no. SDI 1) suitable for tablet packing with corrosponding plastic typepilfer proof ( cap to cap ) O 24 MM

02-10-01644 1. Pilferproof ( cap to cap ) O 24 mm

500 000

02-10-01645 2. Glass bottles 0.5 ml

500 000

Specifications :-

1. Glass type III round ambe .2. Should meet the limit test of alkalinity ( analytical certifcate is required ) .3. Light transmission of amber glass bottls should be according to USPXXI

Packaging :- Each about 200 G.B. shrinked with nylon and these arranged into pallet of dimension about

120 x80 x80 cm which is also shrinked nylon .

GLASS BOTTLES

02-10-01646 1. Glass bottles 150 ml , finish 40 mm , round , amber ( drawing NO.SDI -8 )

3 500 000

02-10-01647 2. Glass bottles 60 ml , finish 18 mm , round , WHITE ( drawing NO.14 )

250 000

Specifications :-1. Glass BOTTLES TO BE FROM glass type III 2. Should meet the limit test of alkalinity ( analytical certifcate is required ) .3. Light transmission of amber glass bottls should be according to USPXXI including the chemical resistance

of amber glass bottls .4-All dimensions per each to be according to the attached refered drawing .

5- specification of P.V.C attach .Packaging :- 1. Glass bottles to be packed with finish up side down in aseperatly shrink wrapped quantities ,

arranged in layers soperated totally by pads & trays covered in between layers & the quter sides on totally nylon shrink wrapped pallette . 2. Lables contanins all above information to be sticked on .

GIUE02-10-01648 strunck - Col - S 3000 kg

02-10-01649 strunck - Col - N 20 000 kg

FIEXOGRAPHIC ( thermai resistant

ink ) 02-10-01650 Blue colour 25 liter02-10-01651 Black colour 25 liter02-10-01652 Red colour 25 liter02-10-01653 Solvent for the

felexographic ink 300 liter

Ampoules lables ( Automatic labelling maching ) HAPA 411 ( Heat seal paper )

02-10-01654 Quality : Thermo - Sensitive PBL3

300 000 meter

55 Nr. Kromekote Weight : paper 78 g / m2 Emulsion 18 g/m2 + - 0.5 g Totally : 96 g/m2

Size : Narrow roll width 32 + - 0.2 mm core diameter 76 mm outer diameter max. 380 mm length of roll max. 1000 m Splices spots : max l per roll please mention specification of your splices material & guarantee packing .

02-10-01655 low Density polyethylen

24.5TON

Grades :- BASF / 2425K ALCODTA/ 063 CODTI / 4050 DOW CHEMICALS / 5585 Epurpose: for injection molding of cap,screw caps and flat discof baby feeding bottles.

02-10-01656 medium viscosity improved mold release grade to be

55.5TON

manfuctured in compliance with food additive regulations

goverening poly carbonate resins for food contact applications=21CFR,177,1580and 21 CFR 010,2010purpose: to produce baby bottles

02-10-01657 liquid silicone rubber

13TON

Grades :- SILASTIO 595 HC A+Bpurpose: to produce teats of baby feeding bottles

ALUMINUM CAN 19ml. Aluminum can suitable for Inhalation product .

02-10-01658 Wall thickness - 0.41 + - 0.05mm

2 000 000

Height - 58.80-59.31 mmDiameter - 22.10 - 22.20 mmNeck bead diameter - 19.86 -20.06 mm Neck ID - 16.57 - 16.76 MM Aluminum grade - 5052

02-10-01659 METERED DOSE VALVE 63 mcl . Metered dose valve suitable for HFA propellant

20 mm crimp on 2 000 000Stem diameter - 3.16 mm All component used should be approved pharmaceutical grade

02-10-01660 ACTUATOR 2 000 000Polypropylene made ,Glaxo, type actuator with cap Orifice diameter - 0.45 mm

02-10-01661 SECONDERY PACKAGING MATERIAL

100 000

CARTONMade of boxboard: 320gms.Dimension : Height -100mm Width - 50 mm Breath - 35 mmThree colour printing

02-10-01662 DIRECTION CIRCULAR 2 000 000Printed on apaper in three colour printing Dimension : Width - 240 mm Height - 115 mm six vertical folds

three horizontal folds

Raw Material for Vet. Drugs

02-10-01663 1)Tylosin tartrate U. S. P23, BP98, BP Vet. 93 95-105% 2500002-10-01664 2) Neomycin sulphate (W. S. P.) U. S. P23, BP98, BP Vet. 93 95-110% 1000002-10-01665 3) Oxytetracyclin (HCL) W.S.P. U. S. P23, BP98, BP Vet. 93 90-115% 500002-10-01666 4) Ampicilin trihydrate W.S.P. U. S. P23, BP98, BP Vet. 93 90-110% 500002-10-01667 5) Amoxycillin trihydrate W.S.P. U. S. P23, BP98, BP Vet. 93 NLT. 92% 400002-10-01668 6) Sulfa merazin U. S. P23, BP98, BP Vet. 93 92.5-101% 100002-10-01669 7)Flumequin (W.S.P.) U. S. P23, BP98, BP Vet. 93 --- 5000 Kg02-10-01670 8) Amprolium HCL (W.S.P.) U. S. P23, BP98, BP Vet. 93 97.5-101% 10000 Kg02-10-01671 9) Trimethoprim U. S. P23, BP98, BP Vet. 93 92-107% 300002-10-01672 10) Sulfadiazine U. S. P23, BP98, BP Vet. 93 92.5-107% 1000002-10-01673 11) Vit. A acetate 500000 (I.U) (W.S.P.)U. S. P23, BP98, BP Vet. 93 NLT. 500000 I.U 400002-10-01674 12) Vit. D3 (W.S.P.) 40000000 I.U orU. S. P23, BP98, BP Vet. 93 NLT. 500000 I.U 15002-10-01675 13) Vit. D3 500000 I.U U. S. P23, BP98, BP Vet. 93 NLT. 500000 I.U 2500 Kg02-10-01676 14) Vit. E adsorbate 33% U. S. P23, BP98, BP Vet. 93 0.5 million I.U 1000002-10-01677 15) Vit. E adsorbate 50% U. S. P23, BP98, BP Vet. 93 0.5 million I.U 5000 Kg02-10-01678 16) Vit. C (W.S.P.) U. S. P23, BP98, BP Vet. 93 ---- 10000 Kg02-10-01679 17) Vit. B1 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98-101% 50002-10-01680 18) Vit. B2 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98-101% 40002-10-01681 19) Nicotin amide (W.S.P.) U. S. P23, BP98, BP Vet. 93 99-101% 30002-10-01682 20) Vit. B12 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98-101% 1002-10-01683 21) Vit. B6 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98-101% 10002-10-01684 22) Vit. K3 (W.S.P.) U. S. P23, BP98, BP Vet. 93 98.5-101% 50002-10-01685 23) Folic acid U. S. P23, BP98, BP Vet. 93 98-101% 50 Kg02-10-01686 24) Manganese sulphate (W.S.P.)U. S. P23, BP98, BP Vet. 93 NLT. 98% 50002-10-01687 25) Ferrous sulphate (W.S.P.) U. S. P23, BP98, BP Vet. 93 99.5-104.5% 500 Kg02-10-01688 26) Zinc sulphate (W.S.P.) U. S. P23, BP98, BP Vet. 93 99-104% 50002-10-01689 27) Sod. C. M. C U. S. P23, BP98, BP Vet. 93 6.5-9.5% 30002-10-01690 28) Cal. Diphosphate U. S. P23, BP98, BP Vet. 93 Assay BBC63 400 Kg02-10-01691 29) Copper sulphate (W.S.P.) U. S. P23, BP98, BP Vet. 93 NLT. 98% 200 Kg

02-10-01692 30) Cal. Carbonate U. S. P23, BP98, BP Vet. 93 --- 400002-10-01693 31) Malt. Diastase U. S. P23, BP98, BP Vet. 93 --- 10002-10-01694 32) Mag. Glycero phosphate U. S. P23, BP98, BP Vet. 93 Assay BBC63 20002-10-01695 33) Cal. Glycero phosphate U. S. P23, BP98, BP Vet. 93 Assay BBC63 50002-10-01696 34) Sod. Glycero phosphate U. S. P23, BP98, BP Vet. 93 Assay BBC63 25002-10-01697 35) Sod. E. D. T. A U. S. P23, BP98, BP Vet. 93 98.5-101% 150 Kg02-10-01698 36) Sod. Benzoate U. S. P23, BP98, BP Vet. 93 99-100.5% 20002-10-01699 37) Sod. Citrate U. S. P23, BP98, BP Vet. 93 99-101% 300 Kg02-10-01700 38) Sod. Bicarbonate U. S. P23, BP98, BP Vet. 93 --- 600002-10-01701

39) Pot. Iodide U. S. P23, BP98, BP Vet. 93

Qty. test 98.5% of Ca.

Carbonate 100 Kg02-10-01702 40) Magnesium sulphate U. S. P23, BP98, BP Vet. 93 --- 1000 Kg02-10-01703 41) Methyl paraben U. S. P23, BP98, BP Vet. 93 99.5-110% 50002-10-01704 42) Propyl paraben U. S. P23, BP98, BP Vet. 93 99.5-110% 25002-10-01705

43) Lactose U. S. P23, BP98, BP Vet. 93Qty.

Identification 19 100000 Kg02-10-01706

44) Yeast extract U. S. P23, BP98, BP Vet. 93Qty. Yeast

(reagent test) 50002-10-01707

45) Glucose – mono hydrate U. S. P23, BP98, BP Vet. 93Qty.

Identification 19 200000 Kg02-10-01708 46) P. V. P U. S. P23, BP98, BP Vet. 93 11.5-12.5% 500 Kg02-10-01709 47) Aerosil U. S. P23, BP98, BP Vet. 93 97-108% 1500 Kg02-10-01710 48) Xanthane U. S. P23, BP98, BP Vet. 93 4.5-5% 250 Kg02-10-01711 49) Citric acid U. S. P23, BP98, BP Vet. 93 99.5-105% 1000 Kg02-10-01712 50) Gentamycin sulphate U. S. P23, BP98, BP Vet. 93 99.5-105% 100002-10-01713 51) Colistin sulphate U. S. P23, BP98, BP Vet. 93 95-105% 100002-10-01714 52) Oxyfendazole BP Vet. 85 97-100.5% 100002-10-01715 53) Doxycyclin HCL U. S. P23, BP98, BP Vet. 93 98-110% 200002-10-01716 54) Chlorotetracycline U. S. P23, BP98, BP Vet. 93 98-110% 100002-10-01717 55) Norofloxacine U. S. P23, BP98, BP Vet. 93 95-105% 100002-10-01718 56) Enrofloxacine U. S. P23, BP98, BP Vet. 93 95-105% 1000 Kg02-10-01719 57) Albendazole U. S. P23, BP98, BP Vet. 93 98-101% 50002-10-01720 58) Furaltadone Hcl U. S. P23, BP98, BP Vet. 93 98-101% 300002-10-01721 59) Furazolidone Hcl U. S. P23, BP98, BP Vet. 93 95-105% 200002-10-01722 60) Streptomycin sulphate U. S. P23, BP98, BP Vet. 93 95-105% 50002-10-01723 61) Chloromphenicol base U. S. P23, BP98, BP Vet. 93 95-105% 1000002-10-01724 62) Benzathin Penicillin U. S. P23, BP98, BP Vet. 93 95-105% 100 Kg02-10-01725 63) Hydrocortisone Acetate U. S. P23, BP98, BP Vet. 93 95-105% 2502-10-01726 64) Betamethason sod. PhosphateU. S. P23, BP98, BP Vet. 93 95-105% 5002-10-01727 65) Magnesium stearate U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01728 66) Cetrimide U. S. P23, BP98, BP Vet. 93 95-105% 50002-10-01729 67) Methyl salicylate U. S. P23, BP98, BP Vet. 93 95-105% 500 Kg02-10-01730 68) Menthol U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01731 69) Iodine U. S. P23, BP98, BP Vet. 93 95-105% 2502-10-01732 70) Chlorohexidine gluconate U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01733 71) Phenol U. S. P23, BP98, BP Vet. 93 95-105% 15002-10-01734 72) Dimethicon U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01735 73) Nystatin U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01736 74) Cloxacillin sod. U. S. P23, BP98, BP Vet. 93 95-105% 10002-10-01737 75) Chlorocresol U. S. P23, BP98, BP Vet. 93 95-105% 2502-10-01738 76) Liquid Paraffin U. S. P23, BP98, BP Vet. 93 95-105% 1000 Kg02-10-01739 77) White soft paraffin U. S. P23, BP98, BP Vet. 93 95-105% 1000 Kg02-10-01740 78) Gelatin U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01741 79) Gglyecerin U. S. P23, BP98, BP Vet. 93 95-105% 1000 Kg02-10-01742 80) Sod.hydroxide U. S. P23, BP98, BP Vet. 93 95-105% 200 Kg02-10-01743 81) Pipernoil butoxide U. S. P23, BP98, BP Vet. 93 95-105% 100

02-10-01744 82) Cetostearyl alcohol U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01745 83) Lanoline U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01746 84) Turpantine Oil U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01747 85) PePPermint Oil U. S. P23, BP98, BP Vet. 93 95-105% 5002-10-01748 86) Tween 80 U. S. P23, BP98, BP Vet. 93 95-105% 50002-10-01749 87) Hard paraffine U. S. P23, BP98, BP Vet. 93 95-105% 25002-10-01750

Alcohol cetosteryl USP 23 50000 Kg

Documents

RAW MATERIALS SPECIFICATIONS DESCRIPTION PACKAGING