RC 2200 RUBBER SEAM COMPOUND RC 2200 is a unique rubber compound that is extremely effective for sealing fasteners, laps and penetrations on various roof surfaces. It is a one- Component product that has excellent adhesion to properly prepared substrates. RC 2200 is thermally stable and resists cracking and peeling due to ozone and ultraviolet exposure. It is typically top-coated with RC 2000 Rubber Roof Coating for maximum weather resistance. RC 2200 has excellent physical properties and reduces costly re-applications. It is available in Brush, Trowel and Spray grade. Type of Resin. . . . . . . . . . . . . . . . . . . .Synthetic Rubber Color . . . . . . . . . . . . . . . . . . . . . . . . . . White Elongation . . . . . . . . (A STM-D-412). . 530% Tensile Strength . . . .(ASTM-D-412). . 1780 PSI Permeance (3 5 mils) (ASTM-E-96) . . 0.148 perms Reduction. . . . . . . . . . . . . . . . . . . . . . None GRADE: BRUSH TROWEL SPRAY Flash Point. . . . . . . 101°F . . . . . . 101°F. . . . . . . 101°F Specific Gravity. . . . 1.05. . . . . . . . 1.07 . . . . . . . . 1.03 Weight (lb./gal.). . . . 8.76 . . . . . . . 8.96 . . . . . . . 8.56 Solids(%/Weight) . . 57±1% . . . . . 63±1%. . . . . . 50±1% Solids(% by Vol.) . . 45±1% . . . . . 51±1%. . . . . . 38±1% Viscosity*. . . . . . . . 12,000 . . . . . . 50,000. . . . . . .5,600 *Centipoise @ 100°F WET ADHESION (ASTM C 794/D 903) Metal . . . . . . . . . . . . Pass EPDM . . . . . . . . . . . . Pass TPO . . . . . . . . . . . . . Pass Hypalon . . . . . . . . . . Pass HANDLING and STORAGE: RC 2200 contains a blend of solvents, which is considered combustible by D.O.T. and O.S.H.A. standards. It should be used and stored away from flames in a well-ventilated area. Avoid prolonged breathing of vapors and prevent contact with eyes. Read all label information and precautions before using. The specifications, properties and performance of materials described herein are based on information believed to be reliable. Unless otherwise expressly provided in written contract, the products discussed are sold without conditions or war ranties, expressed or implied. Product specifications are subject to change without notice. Form:#LC2200-5 Revision:03/07 TYPE F APPLI ATI N: •Metal Buildings and Roofs •Modified and BUR Roofs •Urethane Foam roofs •Single Ply roofs RC 2200 is Miami-Dade Product Control Approved. It is also approved by the State of Florida SURFACE PREPARATION: The surface must be free of any oils, moisture, rust scale, soil or other contaminates that may interfere with good adhesion. Remove any loose material from seams or other surfaces with a wire brush or scraper. Oil and grease should also be removed with solvents or an appropriate detergent cleaner. In many cases high pressure water blast will be sufficient to prepare the surface. APPLICATION TEMPERATURE: For best results, the temperature of the ambient air and the substrate should be within a range of 40°-110°F. Although lower temperatures can be used for brush or trowel applications, it is recommended that the product temperature of the Spray Grade be a minimum of 60°F before applying. APPLICATION METHODS: Depending on the grade selected, RC 2200 can be sprayed, brushed or troweled onto the surface. Apply heavy, uniform coat over fasteners, seams, etc. See Inland Application Bulletins for additional information. www.inlandcoatings.com P.O. Box 247, ADEL, IA 50003 (800)456-8467 FAX: (515)993-4324

RC-2200 Rubber Compound Specification Sheet

Download PDF Report

Upload
roostaman
View
220
Download
0

Embed Size (px)

Citation preview

Page 1: RC-2200 Rubber Compound Specification Sheet

8/8/2019 RC-2200 Rubber Compound Specification Sheet

http://slidepdf.com/reader/full/rc-2200-rubber-compound-specification-sheet 1/1

RC 2200RUBBER SEAM COMPOUND

RC 2200 is a unique rubber compound that isextremely effective for sealing fasteners, laps and

penetrations on various roof surfaces. It is a one-Component product that has excellent adhesion toproperly prepared substrates. RC 2200 isthermally stable and resists cracking and peelingdue to ozone and ultraviolet exposure. It istypically top-coated with RC 2000 Rubber Roof Coating for maximum weather resistance.

RC 2200 has excellent physical properties andreduces costly re-applications. It is available inBrush, Trowel and Spray grade.

Type of Resin. . . . . . . . . . . . . . . . . . . .Synthetic Rubber Color . . . . . . . . . . . . . . . . . . . . . . . . . . WhiteElongation . . . . . . . . (ASTM-D-412). . 530%Tensile Strength . . . .(ASTM-D-412). . 1780 PSIPermeance (35 mils) (ASTM-E-96) . . 0.148 permsReduction. . . . . . . . . . . . . . . . . . . . . . None

GRADE: BRUSH TROWEL SPRAYFlash Point. . . . . . . 101°F . . . . . . 101°F. . . . . . . 101°FSpecific Gravity. . . . 1.05. . . . . . . . 1.07 . . . . . . . . 1.03Weight (lb./gal.). . . . 8.76 . . . . . . . 8.96 . . . . . . . 8.56Solids(%/Weight) . . 57±1% . . . . . 63±1%. . . . . . 50±1%Solids(% by Vol.) . . 45±1% . . . . . 51±1%. . . . . . 38±1%Viscosity*. . . . . . . . 12,000 . . . . . . 50,000. . . . . . .5,600

*Centipoise @ 100°F

WET ADHESION (ASTM C 794/D 903)Metal . . . . . . . . . . . . PassEPDM . . . . . . . . . . . . PassTPO . . . . . . . . . . . . . PassHypalon . . . . . . . . . . Pass

HANDLING and STORAGE:RC 2200 contains a blend of solvents, which isconsidered combustible by D.O.T. and O.S.H.Astandards. It should be used and stored away fromflames in a well-ventilated area. Avoid prolongedbreathing of vapors and prevent contact with eyes.Read all label information and precautions beforeusing.

The specifications, properties and performance of materials describedherein are based on information believed to be reliable. Unlessotherwise expressly provided in written contract, the products discussedare sold without conditions or warranties, expressed or implied. Producspecifications are subject to change without notice.

Form:#LC2200-5 Revision:03/07

TYPE F APPLI ATI N :•Metal Buildings and Roofs•Modified and BUR Roofs•Urethane Foam roofs•Single Ply roofs

RC 2200 is Miami-Dade Product ControlApproved. It is also approved by the State of Florida

SURFACE PREPARATION:The surface must be free of any oils, moisture,rust scale, soil or other contaminates that mayinterfere with good adhesion. Remove any loose

material from seams or other surfaces with a wirebrush or scraper. Oil and grease should also beremoved with solvents or an appropriatedetergent cleaner. In many cases high pressurewater blast will be sufficient to prepare thesurface.

APPLICATION TEMPERATURE:For best results, the temperature of the ambientair and the substrate should be within a range of 40°-110°F. Although lower temperatures can beused for brush or trowel applications, it isrecommended that the product temperature of theSpray Grade be a minimum of 60°F beforeapplying.

APPLICATION METHODS:Depending on the grade selected, RC 2200 canbe sprayed, brushed or troweled onto the surface.Apply heavy, uniform coat over fasteners, seams,etc. See Inland Application Bulletins for additionalinformation.

www.inlandcoatings.comP.O. Box 247, ADEL, IA 50003

(800)456-8467 FAX: (515)993-4324