-
Low Noise Rapid Dryer
RD
Finishing
RD-E-052012.indd 3 5/9/12 10:55 AM
-
Main Functions
2
“Type P” RD Dryer
RDLow Noise Rapid Dryer
Short process timeNo dead time during the reversal of air
circulation direction. It shortens the required process time.
Even drying and minimum damage to most delicate yarnTwin
direction circulation without dead time increases number of
circulation and improves drying quality throughout the process
material.
Low noise operationSpecially selected radial blower keeping
noise level down to minimum 88 dBA (at 1m distance).
Optional Dual Blower configurationDual blower configuration is
suitable for drying of beams. The two blowers are controlled to run
either in series or in parallel to provide the needed air property
for different drying stages of yarn.
The RD low noise rapid dryer is a perfect
companion to FONG’S package dyeing
machine. It is also compatible to major
modules of carriers available in the market.
It provides energy efficiency, time saving and
even drying of yarn after the dyeing process.
RD-E-052012.indd 4 5/9/12 10:55 AM
-
“Type B” RD Dryer
Standard Features
• The kier cover is accurately counterbalanced for easy and safe
operation.
• Flow reversal valves can be operated both manually or
automatically in order to regulate air flow path either outside in
or inside out.
• The radial blower ensures hot air penetrates the packages and
circulates in a closed circuit to influence rapid drying.
• The heating system is equipped with temperature controller,
control valves and steam trap.
• The cooling system is equipped with temperature controller and
control valves.
• The separator is equipped with draining and pressurizing
device.
• Kier, kier cover, main pressurized system and heating/cooling
system are made of 316Ti/ 316L/ 1.4571/ 1.4404 stainless steel.
Options
• Intermediate air receiver with air/water separating
accessories.
• Dual blower configuration, replacing single blower.
Specifications
3
“Type B” are applicable for the drying of beams and packages or
processed material with high density. Models other than those shown
in the table are available upon request.
Model TypeNorminal capacity
(kg)
Norminal power (kW)
Dimensions (mm)
L W H1 H2
RD-85 P 194.4 75 4100 3150 2650 4800
RD-120 P 388.8 132 4500 3500 2750 4900
RD-145 P 583.2 200 4750 3900 2900 5000
RD-166 P 745.2 250 6300 4500 3600 5700
RD-205 P 1166.4 200 × 2 6700 6000 3400 5550
RD-85 B 194.4 37 × 2 4400 3800 3700 6540
RD-120 B 388.8 90 × 2 5050 5100 4060 6960
RD-145 B 583.2 110 × 2 6150 5300 4080 6970
RD-166 B 745.2 132 × 2 6500 5800 4400 7270
RD-E-052012.indd 5 5/9/12 10:55 AM
-
Low Noise Rapid Dryer
RD
Finishing
* FC program controller refers to the latest version in the
series.
Microprocessor based FC Series program controller * provides
cost-effective and high
performance dye cycle control facility.
Comprehensive control management is achievable by integrating
individual FC Series
program controller with the central computer system
is developed by FONG’S to program and monitor a number of linked
machines.
FC Series Program Controller* For The Dyehouse Network Advanced
Control System
Fuzzy Logic Temperature ControlUnique Fuzzy Logic Temperature
Control technology, temperature control can be confined down to
±0.3°C.
Actual temperature repeats set temperature
Accurate temperature control
Conventional PI Control Temp ± 1°C Fuzzy Control Temp ±
0.3°C
We reserve the rights to make changes and improvements to any of
the products described in this document without prior
notice.Details in this document are provided for information
only.
Fong’s National Engineering Co., Ltd.8/F., 22–28 Cheung Tat
Road, Tsing Yi, Hong Kong Tel: + 852 2497 3300 Fax: + 852 2432 2552
E-mail: [email protected] Website: www.fongs.com
Sales Enquiry Tel: + 86 755 8473 6288 Ext. 183 Fax: + 86 755
8473 6808 E-mail: [email protected]
Technical Services Tel: + 86 755 8473 6288 Ext. 234 Fax: + 86
755 8473 7972 E-mail: [email protected]
Fong’s National Engineering (Shenzhen) Co., Ltd. 17-19, Lixin
Road, Danzhutou Industrial Zone, Nanwan Sub-District, Longgang
District, Shenzhen, Guangdong, PRC. Postal Code: 518114 Tel: + 86
755 8473 6288 Fax: + 86 755 8473 6154
Logistics Tel: + 86 755 8473 6288 Ext. 399 Fax: + 86 755 8473
6808 E-mail: [email protected]
Parts Tel: + 86 755 8473 6288 Ext. 169 Fax: + 86 755 8473 6691
E-mail: [email protected]
FONG’S EUROPE GMBHMilchgrundstraße 32, 74523 Schwäbisch Hall,
Germany Tel: + 49 791 403 0 Fax: + 49 791 403 166 E-mail:
[email protected] Website: www.fongs.eu
RD
-E-0
5201
2
RD-E-052012.indd 2 5/9/12 10:55 AM
