Embed Size (px)
Citation preview
Re-tuning: HUMAX Freeview Recorders
This guide can be used to help you re-tune any of the following products with the remote control below:
1) Press the Menu button
* Make sure your box is on and press 80 for the BBC News channel
2) Use the down arrow button to select Installation on the fourth line of the menu and press OK
button
3) Press the zero key four times or enter your own passcode if you have
changed it and press OK button
4) Select Default Setting on the fourth line of the menu and press OK button
5) Don’t worry! Using the arrow
buttons select Yes and press OK button
12 Steps(Steps 1-5)
Page 1 of 3
Manufacturer Helpline: 0844 669 8800 email: [email protected]
Digital television recorders: PVR-9200T, PVR-9150T, PVR-9300T
The message ‘All setting values will be returned to the initial values’ will appear
Re-tuning: HUMAX Freeview Recorders 12 Steps(Steps 6-10)
Page 2 of 3
Manufacturer Helpline: 0844 669 8800 email: [email protected]
7) An initialising message will appear
No action required
9) A searching screen will appear
No action required
6) Press the zero key four times or enter your own passcode if you have changed it
and press OK button
8) A loading screen will appear
No action required
10) When the search has completed select Save and press OK
Re-tuning: HUMAX Freeview Recorders 12 Steps(Steps 11-12)
Page 3 of 3
Manufacturer Helpline: 0844 669 8800 email: [email protected]
12) BBC1 will automatically play out
No action required
11) Saving screen
No action required
You have completed the procedure and can continue viewing the digital channels.
