Upload
rebecca-fea
View
228
Download
4
Tags:
Embed Size (px)
DESCRIPTION
Â
Citation preview
Born in Vimercate (MB) 1991
Email: [email protected] [email protected]: +44 7583 136934 +44 1685 552008Address: 11 Margaret St. Aberaman Aberdare CF44 6SF
Rebecca Rhiannon Fea
CURRICULUM VITAEEducation2005-2010 Liceo Scientifico A. Banfi con
Sperimentazione PNI
2011-2013 Cardiff Metropolitan University - BSc(Hons) Architectural Design and Technology
2013-2014 Erasmus Student - VIA University College Horsens- Architectural Technology and Construc-tion Management
2014-2015 Cardiff Metropolitan University - BSc(Hons) Architectural Design and Tech-nology
Technical SkillsAutoCad 2DSketchUpRevitAdobe PhotoshopAdobe IllustratorMicrosoft Office
Language SkillsEnglishItalianSpanish
Born in Vimercate (MB) 1991
Email: [email protected] [email protected]: +44 7583 136934 +44 1685 552008Address: 11 Margaret St. Aberaman Aberdare CF44 6SF
Rebecca Rhiannon Fea
Student Member of the Chartered Institute of Archtectural Technologists (CIAT)
CURRICULUM VITAEEducation
Technical Skills Language Skills
Hand Drawings
Projects
Live-Work Space Exhibition Space Factory-Office Space Pen-Y-Fan Visitor Centre
Social Residence Boller Castle Renovation
Work in progress Cardiff Bay Arts Centre
Sketch of the bronze statue made by the Italian painter and sculptor Andrea del Verrocchio. Made between 1473 and 1745 the statue was represented by me in 2009 as part of my art module to demonstrate sketching skills and ability to reproduce shadows and contrast.
DAVID
Vimercate 2009
size: 500x700mm
The sketches represent a balcony on the facade of one of the Cardiff University buildings and an eaves detail on Windsor Place. Belonging to the work done in my first year at Cardiff Metropolitan University, these pencil sketches were aimed at repre-senting the variety of architectural features that characterises Cardiff.
DETAILS OF CARDIFF
Cardiff 2011
size: 210x280mm
CAIROLIVE-WORK SPACELocated in the centre of the renowned city of Cairo the design merges two aspects of life usually separated. The space is subdivided in three areas designated for private family use, guest entertainment and work. The separation is influenced by the local tradition of not allowing strangers in the more private areas of the house; but the more modern approach to this design does not seclude people within four walls. The open plan area on the ground floor maintains in fact privacy by allowing people to catch glimpses of the other rooms without opening completely to them.
PORTFOLIOARCHITECTURERebecca Rhiannon
Fea
Cardiff 2011
LIVE-WORK SPACE VIEWS
CONCEPT
Cardiff 2011
Decoration pattern found on every day items belonging to Mediterranean populations .
Division of Spaces
Mashrabiya and Ventilation
Public
Private
Private
Erasmus Student - VIA University College Horsens- Architectural Technology and Construc-tion Management
Cardiff Metropolitan University - BSc(Hons) Architectural Design and Tech-nology
Technical SkillsAutoCad 2DSketchUpRevitAdobe PhotoshopAdobe IllustratorMicrosoft Office
Language SkillsEnglishItalianSpanish
Thermal MassThe location’s climate sets the perfect scenario to benefit from the energy created by thermal mass: all solid walls consisting of rendered hollow-core clay blocks are therefore positioned South.
Technical Skills Language SkillsEnglishItalianSpanish
EXHIBITION SPACEA design kept as simple as possible not to compete with the complexity of the art pieces. Bare materials such as concrete and steel arranged to create simple shapes make a perfect host for the art of Chris Natrop. The young Los Angeles based artist focuses his inspiration in creating large drawings, paper cut-outs and installations.
CONCEPT SimplicityCardiff 2011
FACTORY-OFFICE SPACEThe steel framed building is kept pretty simple for what con-cerns its structure but it is brought to life by the addition of a light cladding facade designed to hide the monotonous ap-pearance of the roof and to give movement to the facade.The constant movement of light reflected by the cladding gives a different appearance to the factory each time of the day and the glazed wall which opens to the main reception hall gives lightness to the otherwise heavy wall and makes the factory look overall more approachable.
Cardiff 2012
SVP1
FW3
SW3
SW2
A
1
2
3
4
5
RE
REIL 99.401CL 99.850
IL 98.858CL 99.850
IL 98.134CL 99.850
CLADDING DETAIL
SITE PLAN
PEN-Y-FANVISITOR CENTRE
Set in the middle of stunning views offered by the surrounding hills, the visitors centre faces Pen-y-Fan, the highest peak in Wales. The building sits between the main road cutting through the National Park and a slope leading to the stream at the feet of Pen-y-Fan. The visitor centre offers changing facilities for bikers and hikers at the lower level, where the building links with the path to the top of the peak. On the upper level other facilities can be found: an educational area designed for groups of young pupils to learn about the site and a cafe’ area provided with a small kitchen to accommodate visitors on their trip.Both in summer and winter there is the possibility to make the most of the views from the inside of the large glazing areas or from the balcony facing the peak.
BRECON BEACONSNATIONAL PARK
CONCEPT
Cardiff 2013
FRAMETimber
The timber of which the structure will be comprised will be sources from the exist-ing site which is at the moment partly covered by a plantation of Conifers.
East eaves detail
West eaves detail
Valley detail
PEN-Y-FANVISITOR CENTRE
SOCIAL RESIDENCEHORSENSSituated on one of the main roads leading into the town of Horsens, Sonderbrogade offers an interesting plot surrounded by traditional brick buildings and Sonderbro Kirke. The prob-lems created by the proximity of a big road are solved by the subdivision of the plot in three main areas running along the site and providing more and more privacy as the residents walk towards the back of the plot itself, designed as private amusement area for the residents. Moreover, this area is kept more quiet by its position behind the buildings which partially absorb noise coming from the road.Traditional elements such as bricks constitute a feature of the building that was intended to fit with the surroundings provid-ing innovative features at the same time. Integration with the site was also the main stream followed for the layout of the plot, which maintains the paths leading to the residences situated below the plot itself.
Horsens 2013
PEN-Y-FANVISITOR CENTRE
CONCEPT
Sound Privacy
Site preservation
SOCIAL RESIDENCEHORSENS
Horsens 2013
200x200x4mm ceramic tilesapplied on floor incl. showercubicle.
30mm flexible mortar joint.
Polyethylene DPM appliedon top of floor screedoverlapping at least 100mmwith DPM on wall.
20mm concrete screedapplied after installation ofshower drain.
60mm reinforced concreteslab; 6mm round steel meshlaid in grid of 100x100mm.
60mm rigid insulation cut incorrespondence of positionof shower drain forsupporting structure.
Adjustable stainless steel squareshower drain suitable for floorswith DPM; installed at right heighton stainless steel holders fixed totimber plates.
10mm step down intoshower cubicle.
430
6060
270
SCALE 1:20
150mm cast in situ smoothconcrete wall finished with paint.
Laminated timber floor laid ontimer joists supported by rubberwedges with 50mm soft insulationin cavity.
Flexible joint abovenon-loadbearingpartition wall.
BATHROOMLIVINGROOM
Polyethylene DPM appliedon top of floor screedoverlapping at least 100mmwith DPM on wall.
20mm concrete screedapplied after installation ofshower drain.
60mm reinforced concreteslab; 6mm round steel meshlaid in grid of 100x100mm.
300x300mm water resistanttiles fixed on stainless steelgrid hung 250mm fromconcrete slab.
270x1200mm hollow coreconcrete slab.
200x200x4mm ceramic tilesapplied on floor.
60mm rigid insulation.
SCALE 1:20
283
1320
800
560
700
920
380
160
300x300mm waterresistant tiles fixedon stainless steelgrid hung onconcreteslab.
Wall lights installedat specified heightfrom cabinetsurface.(
White ceramicround profiled sinkwith stainless steeldiffuser.
Wall mountedradiator fixed atillustratedheight.
Mosaic tiles usedalso on outside ofwall definingcubicle.
270
200200200
CW HW
EV IVHH HC
RPSP
WM
Water pipes
Sewer pipes
Heating pipes
Ventilation pipes
Shower detail
Partition wall detail
Services shaft section
Pipes layout planSCALE 1:50
SCALE 1:50
Dating back to the 14th Century, Boller Castle is one of the pieces of history belonging to the small town of Horsens, Den-mark. Now in disuse the listed building offers vast spaces both internally and externally with big rooms and a park lead-ing to the fjord in which the town is situated.The proposal includes the reconstruction in cortene steel and glass of the three towers where originally positioned; and the transformation of the internal spaces in a gallery, five luxury residences, a restaurant/bar and offices.
HORSENSBOLLER CASTLE RENOVATION
Horsens 2014
GALLERY
5 LUXURY RESIDENCES
OFFICES
RESTAURANT
BAR
HORSENSBOLLER CASTLE RENOVATION SPACE Ground Floor PlanHorsens 2014
Bar Area
SCALE 1:10
36x48mm batten at 245mm centres
30x48mm counterbatten at 245mm centres
0.75mm thick roof underlay (breathable)
0.75mm thick breathable membrane fixed with adhevise tape
12.5mm thick gypsum fibreboard fixed with 3.9x30mm screws (13 screws per m2 for walls/30 screws per m2 for ceilings); straight edges in corre-spondence of walls.
25x195mm timber profile bolted to existing rafter.For information about bolts see other drawings.
275mm cellulose insulation between rafters
paintable elastic sealant
original ridge laid on new lime based mortar.
roof underlay joining and overlapped by ulterior layer in correspondence of joint (MIN. 100mm).
roof plywood 15x1200x2400mm
95x22mm timber planks at 300mm centres
galvanised flat head nails/counter-sunk screws 2.5 times the panel’s thickness. (For spacing and quantities see plywood installation drawing)
Ridge detail
36x48mm batten at 245mm centres
30x48mm counterbatten at 245mm centres
0.75mm thick roof underlay (breathable)
0.75mm thick breathable membrane fixed with adhesive tape
12.5mm thick gypsum fibreboard fixed with 3.9x30mm screws (13 screws per m2 for walls/30 screws per m2 for ceilings); straight edges in corre-spondence of walls.
25x195mm timber profile bolted to existing rafter.For information about bolts ‘eaves detail’
275mm cellulose insulation between rafters
95x22mm timber planks at 300mm centres galvanised flat head nails/counter-
sunk screws 2.5 times the panel’s thickness. (For spacing and quantities see plywood installation drawing)
150x80mm plank for support of plywood boards in top flashing section; boards’ edge must be towards support
MIN. 400
MIN. 300
precompressed impregnated foam seal; install to bottom and let expand up; use wood shims to hold seal in place until it expands; make sure 3mm extra seal are left to ensure water tight seal at intersection
roof membrane continuing until support plank; overlapped by another layer of membrane in correspondence of joint (MIN. 100mm); overlapped by treated copper flashing.
copper flashings in correspondence of last tile must be joint wit seam as shown .SCALE 1:10
Valley detail
Roof light detail
CARDIFF BAYARTS CENTRE
Cardiff 2015
The new Arts Centre will be a high quality multi-purpose building providing facilities not yet available in the proximity and therefore offering the public a wider range of entertainement in the develop-ing area. The new building will be located in Cardiff Bay, on the plot available between the KPMG building and the Atradius building on Britannia Quay. The centre will spread the dynamic feel already perceptible in the waterfront area to the side facing Roath Basin, until now used mainly as office location.
Facilities incorporated in the building include a small theatre designed for small school performances, dance rooms, music room, two exhibition areas, a cafe’ serving also small meals and refreshments, two areas designated to teaching and a small instal-lation workshop.All rooms are provided with high sound insulating glass as they will all be ‘open’ to the public dwelling in other spaces and could cause considerable noise levels.