--

DrillingFluidsTecnnoloqy. Technical Data

Production Services 405-375-6282 • Kingfisher, OK

RED/STRIPETMMud Lightener

RED/STRIPE is a novel water based mud lightener. It has been specifically designed for use in a concept fortreating various lossed of fluids in water base drilling fluid systems. RED/STRIPE works well in all types of waterbase d~illir:lgfluids.

PRECAUTIONS

• Although RED/STRIPE is formulated for cold weather,precautions should be taken to keep the product fromfreezing. Freezing will not affect the performance ofthe product. If freezing occurs, the product should beallowed to thaw and care taken to make sure the productis well mixed before use.

AVAILABILITY.s>:

• RED/STRIPE is readily available. Local stocks aremaintained in selected areas. Contact your local DrillingFluids Technology, Inc. distributor for specific requirements.

..

Please refer to the MSDS for handling instructions

DFT_DFT Production Services. Recorrunendations given in this bulletin are based on tests believed to be reliable. However, the use of the information is beyond

the control of OFT and no guarantee, expressed or implied is made to the results obtained if not used in accordance with directionsor established safe practice. The buyer must assume all responsibility, induding injury or damage from the misuse of the productsuch, or in combination with other materials. This bulletin is not to be taken as a license 10operate under or recommendation toinfringe any patent.

Cl2003. Drilling Fluids Technology. All rights reserved. 0000.00

DrillingFluidsTechnology. Technica Da ta

Production Services 405-375-6282 • Kingfisher. OK

RED/STRIPETMMud Lightener

RED/STRIPE is a novel water based mud lightener. It has been specifically designed for use in a concept fortreating various lossed of fluids in water base drilling fluid systems. RED/STRIPE works well in all types of waterbase drilling fluids.

APPLICATIONS

• RED/STRIPE Mud Lightener is a multi-componentblend of anionic and non ionic surfactants and con-surfactants in an aqueous solution. RED/STRIPEis designed to:

• Reduced Fluid Density• Reduce Water Usage• Lower Solids Content• Improve Fluid Loss Control• Improve Loss Circulation Control• Reduce Overall Chemical Usage• Reduce Daily Mud Maintenance

Cost By 20-25%

RECOMMENDATIONS

• Initial application should consist of 4 to 6 pails ofRED/STRIPE per 1000 barrels of drilling fluid addedover a full circulation period. A tourly treatment of1-2 pails per 1000 barrels added to the system overa full circulation is normally sufficent to maintaindesirable mud weight.

RED/STRIPE is most effectively applied by pumpinginto the standpipe under pressure with a small positive-displacement chemical pump.

RED/STRIPE can also be added by mixing 1 gallon ofRED/STRIPE to 40-50 gallons of water in a chemicalbarrel and injecting directly into the pump suction. Totalconcentration and maintenance treatments should befollowed as recommended.

RED/STRIPE fluids are designed to create micro-bubbles.However, drilling fluids containing RED/STRIPE exhibitlittle foaming tendencies when the product is usedproperly. Density reduction in surface return fluid isdirectly proportioned to amount being mixed. Very littlefoaming is usually observed in surface pits unless mixinggreat amounts. Mud pumps are generally affected asthey would normally be with an aerated, low-density fluid.

PHYSICAL PROPERTIES

Appearance:

SpecificGravity:

Density:

pH(5% soln. In 3:1 IPA:Water):

Flash Point:Solubility, 10% in Fresh Water:..•

Red, Liquid

1.09

9.1 Ibs/gal

8.513S0F (STC)

Complete

PACKAGING

• RED/STRIPE is packaged in S gallon (18.9 liter) non-returnable pails.

Please refer to the MSDS for handling instructions

DFT_DFT Production Services. Recommendations given in this bulletin are based on tests believed to be reliable. However; the use of the information is beyond

the control of OFT and no guarantee, expressed or implied is made to the results obtained if not used in accordance with directionsor established safe practice. The buyer must assume all responsibility, including injury or damage from the misuse of the productsuch, or in combination with other materials. This bulletin is not to be taken as a license to operate under or recommendation toinfringe any patent.

= 2D03. Dril6ng Fk.Iids Ted'lnology. All rights reserved. 00.00סס

RED STRIPE

MATERIAL SAFETY DATA SHEET

SECTION 1. PRODUCT IDENTIFICATION

PRODUCT NAME: Red Stripe

SUPPLIER: DRILLING FLUIDS TECHNOLOGYP.O. Box 284BOOKER, TEXAS 79005

OFFICE: 806-658-4600

FOR EMERGENCIES CONTACT: INFO TRAC

SECTION II. HAZARDOUS INGREDIENTS

HAZARDOUS COMPONENTS - (CAS Number)Isopropyl Alcohol (67-63-0) 5%Methanol (67-56-1)10%Ethylene Glycol Butyl Ether (111-76-2»20%

NFPA Ratings:

Health: 2Fire: 2React: 00= LEAST to 4= EXTREME

1-800-535-5053

Exposure Limits400 PPM200 PPM25 PPM

SECTION III. PHYSICAUCHEMICAL CHARACTERISTICS

BOILING POINT: NDSPECIFIC GRAVITY (H20=1): .96VAPOR DENSITY (AIR=1): NDSOLUBILITY IN WATER: CompleteAPPEARANCE AND ODOR: Light red liquid.

MELTING POINT: NDVAPOR PRESSUR]E: NDEVAPORATION RATE (BuAC=1): NDpH: 6.5

SECTION IV. FIRE AND EXPLOSION DATA

FLASH POINT (METHOD): 105°F (TCC)FLAMMABLE LIMITS (% BY VOLUME IN AIR): NDEXTINGUISHING MEDIA: Water fog, Dry powder, or Carbon diOXiI·e.SPECIAL FIRE FIGHTING PROCEDURES: Approach fire from upwind side. Avoidbreathing smoke, fumes, mist, or vapors on the downwind sid L Firefighters wearprotective clothing and self contained breathing apparatus. .

UNUSUAL FIRE AND EXPLOSION HAZARDS: Heating may cause pressure buildupand possible rupture of the container

Page 1

RED STRIPE

SECTION V. REACTIVITY INFORMATION

STABILITY: Product is stable.MATERIALS TO AVOID: Heat.HAZARDOUS DECOMPOSITION OR BYPRODUCTS: May produce hazardous fumesor hazardous decomposition products.HAZARDOUS POLMERIZATION: Will not occur ISECTION VI. HEALTH HAZARD DATA

ROUTES OF ENTRY

INHALATION? Yes - IrritantEYES? Yes - IrritantSKIN ABSORPTION? Possible - IrritantINGESTION? Yes - Irritant

HEALTH HAZARDS

ACUTE: The health and safety characteristics of this product are not fully known. Thisproduct contains methanol therefore, we advise that it be handled and managed as ahazardous substance.

CHRONIC: No chronic effects, either systemic or local are known.

SIGNS AND SYMPTOMS OF EXPOSURE: Ingestion may cause irritation to themembranes or the mouth, throat and gastrointestinal tract. Nausea, vomiting, cramps,and diarrhea may occur. Skin absorption may cause moderate irritation. Inhalation ofthe vapors may cause headache, nausea, and other symptoms for the exposure toisopropanol and methanol. Inhalation of mists or sprays may result in nonspecificirritation to the upper respiratory tract. Contact with skin may caUSE.~mild irritation.

FIRST AID PROCEDURES

EYE CONTACT: Flush eyes with large amounts of water. Do not\try to neutralize withchemical agents. Get medical attention. ..SKIN CONTACT: Flush with water or soap and water for 15 minutes or until all traceshave been removed. Seek medical attention if symptoms develop and persist.

INGESTION: DO NOT induce vomiting, get immediate medical attention.

INHALATION: Remove victim to fresh air and, if needed, immediately begin artificialrespiration. Give oxygen if breathing is labored. Get emergency medical help. Contacta physician immediately.

Page 2

RED STRIPE

SECTION VII. SPILL CONTROL MEASURES

SPILL OR LEAK PROCEDURES: Eliminate all ignition sources. Wear suitableprotective equipment. Small spills, pick up with absorbent media. Store asHAZARDOUS waste. Large spills, contain with dikes, pick up with vacuum truck. Pickup remaining liquids with absorbent material. Handle as HAZARDOUS waste. Notifyproper local, state, and federal agencies.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Store in a COOl,ventilated area, away from ignition sources. Ground all equipment to prevent buildup ofstatic charge. Treat every drum as if it was full.

OTHER PRECAUTIONS: Clean up leaks/spills immediately to prevent soil or watercontamination.

SECTION VIII. SPECIAL PROTECTION INFORMATION I

RESPIRATORY PROTECTION: Not normally needed under proper conditions of useand storage.

VENTILATION: LOCAL EXHAUST - RecommendedSPECIAL - Not NecessaryMECHANICAL - Recommended, if indoors.OTHER - Not Necessary

PROTECTIVE GLOVES: Butyl or neoprene rubber.

EYE PROTECTION: Chemical goggles or full face shield.

OTHER PROTECTIVE EQUIPMENT: Boots, aprons, drench showers, eye wash asneeded for protection against spills and/or splashes.

WORK HYGIENIC PRACTICES: Avoid contact with skin, eyes and clothing. Afterhandling this product, wash hands before eating, drinking, or smoking. If contactoccurs, remove contaminated clothing. If needed, take first aid action shown on sectionVI. Launder contaminated clothing before reuse.

SECTION IX. TRANSPORTATION INFORMATION

Flammable liquids, n.o.s., 3, UN1993, PGII(contains methanol)

Emergency Response Guide #128

Page 3

ill..., i .•.

RED STRIPE

SECTION X. REGULATORYTOXIC SUBSTANCES CONTROL ACT (TSCA): 40 CFR 710 sources of the rawmaterials used in this mixture assure that all chemical ingredients present are incompliance with Sect. 8(b) Chemical Substance Inventory, or are otherwise incompliance with TSCA.

FOOTNOTES:

NA-Not applicable, NE-Date not established, CS-Cancer Suspect Agent,OX-Oxidizer, ND-No data, Cor-Corrosive, CALC-Calculated, EST-Estimated,STEL-Short Time Exposure Limit, TLV-Threshold Limit Value,PEL-Permissible Exposure Limit, TWA-Time Weighted Average, 8 hours,HMIS-Hazardous Material Identification System,PPI-Personal Protection Index

The data represented is true and correct to the best of our knowledge and belief,however, neither seller nor preparer makes any warranties, express or implied,concerning the information presented. The user is cautioned to perform his/her ownhazard evaluation and to rely upon his/her own determination .

< Page 4

..