Upload
duongkhanh
View
214
Download
0
Embed Size (px)
Citation preview
98
References
[1]. Ahuja I.P.S., and Khamba J.S. (2008), ‘Strategies and success factors for
overcoming challenges in TPM implementation in Indian manufacturing
industry’, Journal of Quality in Maintenance Engineering, Vol.14, No.2,
pp.123–147.
[2]. Aiwina Heng, Sheng Zhang, Andy C.C. Tan and Joseph Mathew (2009),
‘Rotating machinery prognostics: State of the art, challenges and opportunities’,
Mechanical Systems and Signal Processing, Vol.23, No.3, pp.724–739.
[3]. Arsecularatne J.A., Fowle R.F., Mathew P., and Oxley P.L.B. (1996),
‘Prediction of tool life in oblique machining with nose radius tools’, Wear,
Vol.198, No.1–2, pp.220–228.
[4]. Ahmari A.M.A. (2007), ‘Predictive machinability models for a selected hard
material in turning operations’, Journal of Materials Processing Technology,
Vol.190, No.1–3, pp.305–311.
[5]. Alireza Ghasemi, Soumaya Yacout, and M.-Salah Ouali (2010), ‘Evaluating
the Reliability Function and the Mean Residual Life for Equipment w ith
Unobservable States’, IEEE Transactions on Reliability, Vol.59, No.1, pp.45–
54.
[6]. Altab Hossain, Ataur rahman, Mohiuddin A.K.M and Yulfian Aminanda
(2012), ‘Fuzzy logic system for tractive performance prediction of an intelligent
air-cushiontrack vehicle’, International Journal of Aerospace and Mechanical
Engineering, Vol.6, No.1, pp.1–7.
[7]. Al-Habaibeh A., Zorriassatine F., and Gindy N. (2002), ‘Comprehensive
experimental evaluation of a systematic approach for cost effective and rapid
design of condition monitoring systems using Taguchi’s method’, Journal of
Materials Processing Technology, Vol.124, No.3, pp.372–383.
[8]. Ball P.D., Despeisse, Evans S., and Levers A. (2009), ‘Mapping Manufacturing
material, energy and waste process flows’, Proceedings of the 7th global
conference on sustainable manufacturing, Chennai, India.
99
[9]. Baruah P., and Chinnam R.B. (2005), ‘HMM for diagnostics and prognostics in
machining process’, International journal of production research, Vol.43, No.6,
pp.1275–1293.
[10]. Babur Ozcelik and Mahmut Bayramoglu (2006), ‘The statistical modeling of
surface roughness in high-speed flat end milling’, International Journal of
Machine Tools and Manufacture, Vol.46, No.12–13, pp.1395 –1402.
[11]. Bradley D.M., and Gupta R.C. (2003), ‘Limiting behavior of the mean residual
life’, Annals of the Institute of Statistical Mathematics, Vol.55, No.1, pp 217–
226.
[12]. Bom Soon Lee, Han sub Chung, Kim T, Ford F.P and Andersen P.L(1999),
‘Remaining life prediction methods using operating data and knowledge on
mechanisms’, Journal of Nuclear Engineering and Design, Vol.191, No.2,
pp.157-165.
[13]. Bhuie A.K., Ogunseitan O.A., Saphores J-D.M., Shapiro A.A. (2004),
‘Environmental and economic trade-offs in consumer electronic products
recycling: A case study of cell phones and computers’, Proceedings of the
I E E E International Symposium on Electronics and the Environment, pp.74 –
79.
[14]. Cao H-J., Liu F., He Y., and Zhang H. (2002), ‘Study on model set based
process planning strategy for green manufacturing’, Computer Integrated
Manufacturing System ,Vol.8, No. 12, pp.978–982.
[15]. Carnero M.C. (2005), ‘Selection of diagnostic techniques and instrumentation
in a predictive maintenance program. A case study’, Decision Support Systems,
Vol.38, No.4, pp.539–555.
[16]. Chee Keong Tan, Phil Irving and David Mba (2007), ‘A comparative
experimental study on the diagnostic and prognostic capabilities of acoustics
emission, vibration and spectrometric oil analysis for spur gears’, Mechanical
Systems and Signal Processing, Vol.21, No.1, pp. 208–233.
[17]. ChaochaoChen, Bin Zhang, Vachtsevanos G., and Orchard M. (2011),
‘Machine Condition Prediction Based on Adaptive Neuro–Fuzzy and High-
Order Particle Filtering’, IEEE Transations on Industrial Electronics, Vol.58,
No.9, pp.4353–4364.
100
[18]. Chaochao Chen, Bin Zhang and Vachtsevanos G. (2012), ‘Prediction of
Machine Health Condition Using Neuro-Fuzzy and Bayesian Algorithms’, IEEE
Transactions on Instrumentation and Measurement, Vol.61, No.2, pp.297–306.
[19]. Coetzee J.L. (1997), ‘Maintenance’, Hatfield, South Africa: Maintenance
Publishers.
[20]. Carl S., Byington P.E, Mattew J Watson., and Edwards D. (2004), ‘Data -
Driven neural network methodology to remaining life predictions for aircraft
actuator components’, Proceedings of the IEEE Aerospace conference, Vol.6,
pp.3581–3589.
[21]. Choudhury S.K., and Bartarya G. ( 2003), ‘Role of temperature and surface
finish in predicting tool wear using neural network and design of experiment’,
International Journal of Machine Tools & Manufacture, Vol.43, No.7, pp.747–
753.
[22]. Christian N. Madu , Chuhua Kuei , Ifeanyi E Madu , (2002), ‘A hierarchic
metric approach for integration of green issues in manufacturing: a paper
recycling application’, Journal of Environmental Management, Vol.64, No.3,
pp. 261–272.
[23]. Chun-Hsin Wu, Jan-Ming Ho and Lee D.T. (2004), ‘Travel-time prediction
withSupport vector regression’, IEEE Transactions on intelligent
transportation systems, Vol.5, No.4, pp.276–281.
[24]. Chiang Hong and Wei-Chiang (2006), ‘Predicting Engine Reliability by
Support Vector Machines’ International Journal of Advanced Manufacturing
Technology, Vol. 28, Nos. 1-2, pp. 154-161
[25]. Divya Tomar, Ruchi Arya and sonali Agarwal, (2011), ‘Prediction of
profitability of industries using weighted SVR’, International Journal of
Computer Science and Engineering, Vol.3, No.5, pp.1938–1944.
[26]. Diaz N., Helu M., Jayanathan S., Yifen Chen Horvath A., and Dornfeld D.
(2010), ‘Environmental analysis of milling machine tool use in various
manufacturing environments’, Proceedings of the IEEE International
Symposium on Sustainable Systems and Technology, pp.1–6.
101
[27]. Das A.N., and Sarmah S.P. (2010), ‘Preventive replacement models: an
overview and their application in process industries’, European Journal of
Industrial Engineering, Vol.4, No.3, pp.280–307.
[28]. Diego J. Pedregal and Maria Carmen Carnero (2009), ‘Vibration analysis
diagnostics by continuous-time models: A case study’, Reliability Engineering
and System Safety, Vol.94, No.2, pp.244–253.
[29]. Daniel Kirby E., and Joseph C Chen, (2007), ‘Development of a fuzzy-nets-
based surface roughness prediction system in turning operations’, Computers &
Industrial Engineering, Vol.53, No.1, pp. 30–42.
[30]. Enrico Zio and Francesco Di Maio (2010), ‘A data driven fuzzy approach for
predicting the remaining useful life in dynamic failure scenarios of a nuclear
system’, Reliability engineering and system safety, Vol.95, No.1, pp. 49 – 57.
[31]. Erry Yulian T Adesta, Muataz AI Hazza, Muhammad Riza, Delvis Agusman
and Rosehan (2010), ‘Tool life estimation model based on simulated flank wear
during high speed hard turning’, European Journal of Scientific Research,
Vol.39, No. 2, pp. 265–278.
[32]. Fatida Rugrungruang, Sami Kara and Hartmut Kaebernic (2009), ‘An
integrated methodology for assessing physical and technological life of products
for reuse’, International Journal of Sustainable Manufacturing, Vol.1, No.4,
pp.463–490.
[33]. Fatida Rugrungruang (2008), ‘An Integrated Methodology for Assessing
Physical & Technological life of Products for Reuse’, Thesis, University of new
South Wales.
[34]. Fagang Zhao, Jin Chen, Lei Guo and Xinglin Li (2009), ‘Neuro-fuzzy Based
Condition Prediction of Bearing Health’, Journal of Vibration and Control,
Vol.15, No.7, pp.1079–1091.
[35]. Feldmann K and Melzer K (2004), ‘Implementation of E-waste Legislation in
EU Members states,North America and China’, Proceedings of the 11 th
International CIRP life cycle Engineering seminar on Product Life Cycle-
Quality Management, Belgrade,Serbia, pp. 49-56.
102
[36]. Grall A., Bérenguer C., Dieulle L. ( 2002), ‘A condition-based maintenance
policy for stochastically deteriorating systems’, Reliability Engineering &
System Safety, Vol.76, No.2, pp.167–180.
[37]. Griese H., Poetter H., Schischke K., Ness O., and Reichl H. (2004), ‘Reuse
and lifetime extension strategies in the context of technology innovations,
global markets, and environmental legislation’, Proceedings of the IEEE
International Symposium on Electronics and the Environment, pp.173–178.
[38]. Guide V.D.R., Jayaraman V., Linton J.D. (2002), ‘Building contingency
planning for closed-loop supply chains with product recovery’, Journal of
Operations Management, Vol.21, No.3, pp.259–279.
[39]. Grall A., Dieulle L., Berenguer C., and Roussignol M. (2002 b),
‘Continuous-time predictive-maintenance scheduling for a deteriorating system’,
IEEE Transactions on Reliability, Vol.51 , No.2, pp.141–150 .
[40]. Gang Niu and Bo-Suk Yang (2010), ‘Intelligent condition monitoring and
prognostics system based on data-fusion strategy’, Expert Systems with
Applications, Vol.37, No.12, pp.8831–8840.
[41]. Gebraeel N.Z., Lawley M.A., Li R., and Ryan J.K. (2005), ‘Residual-life
distributions from component degradation signals: A Bayesian approach’, IIE
Transactions, Vol.37, No.6, pp. 543–557.
[42]. Gungor.A and Gupta S.M (1999), ‘Issuses in environmentally conscious
manufacturing and product recovery: a survey’, Computers and Industrial
Engineering, Vol.36, No.4, pp.811-853.
[43]. Haitao Liao, Wenbiao Zhao and Huairui Guo (2006), ‘Predicting remaining
useful life of an individual unit using proportional hazards model and logistic
regression model’, Proceedings of IEEE Reliability and maintenance
symposium, pp.127–132.
[44]. Herzog M.A., Marwala T., and Heyns P.S., (2009), ‘Machine and component
residual life estimation through the application of neural networks’, Reliability
Engineering and System Safety, Vol.94, No.2, pp.479–489.
[45]. Hua Liu , Weiping Chen , Zhixin Kang , Tungwai Ngai , and Yuanyuan Li
(2005), ‘Fuzzy Multiple Attribute Decision Making for Evaluating Aggregate
103
Risk in Green Manufacturing’, Tsinghua Science & Technology,Vol.10, No.5,
pp.627–632.
[46]. Hongzhou Wang (2002), ‘A survey of maintenance policies of deteriorating
systems’, European Journal of Operational Research, Vol.139, No.3, pp.469–
489.
[47]. Huang S.N., Tan K.K., and Lee T.H. (2007), ‘Automated Fault Detection and
Diagnosis in Mechanical Systems’, IEEE Transactions on Systems, Man, and
Cybernetics, Part C: Applications and Reviews, Vol.37, No.6, pp.1360–1364.
[48]. Hong Thom Pham and Bo-Suk Yang (2010), ‘Estimation and forecasting of
machine health condition using ARMA/GARCH model’, Mechanical Systems
and Signal Processing, Vol. 24, No.2, pp.546–558.
[49]. Inman D.J., Farrar C.R., and Lopes V. (2005), Damage prognosis - For
aerospace, civil and mechanical systems, John Wiley & Sons.
[50]. Iman Attarzadeh and Siew Hock Ow (2010), ‘A Novel Algorithmic Cost
Estimation Model Based on Soft Computing Technique’, International Journal
of Computer Science, Vol.6, No.2, pp.117–125.
[51]. ISO 3685 (1993), ‘Tool life testing with single point turning tools’, 2nd
edition,
International Organization for Standards, Geneva.
[52]. Jack pouchet (2010), ‘Reuse IT to promote sustainability, efficiency’, Energy
and environmental news for business, news letter,
www.environmentalleader.com .
[53]. Jay L. Devore. (2008), ‘Probability and Statistics for Engineers’, Cengage
Learning.
[54]. Jaharah A Ghani, Fifdaus Mohamad Hamzah, Mohd. Nizam Ab. Rahman and
Baba Md. Deros (2006), ‘The reliability of tool life prediction model in end
milling’, Journal Mekanikal, Vol.21, pp.65–71.
[55]. Jaklistsch F. (1983), ‘Metal cutting Technology’, Valeron, Berkly.
104
[56]. Jardine A.K.S and Banjevic(2006), ‘A review on machinery diagnostics and
prognostics implementing condition-based maintenance’, Mechanical Systems
and Signal Processing , Vol.20 , No.7, pp. 1483–1510.
[57]. Jihong Yan, Dingguo Hua and Xing wang (2011), ‘Sustainable manufacturing
oriented prognosis for facility reuse’, Key engineering materials, Vol.450,
pp.437–440.
[58]. Jiri Vass, Robert B Randall, Sami Kara and Hartmut Kaebernick (2010),
‘Vibration based approach to life time prediction of electric motors for reuse’,
International Journal of Sustainable Manufacturing, Vol.2, No.1, pp.2–29.
[59]. Jiju Antony, Raj bardhan Anand,Maneesh Kumar and Tiwari M.K. (2006),
‘Multiple response optimization using Taguchi methodology and nero-fuzzy
based model’, Journal of Manufacturing Technology Management, Vol.17,
No.7, pp. 908–925.
[60]. Jutta Gutberlet (2000), ‘Sustainability: a new paradigm for industrial
production’, International Journal of Sustainability in Higher Education, Vol.1,
No.3, pp.225–236.
[61]. Jiang and Zhigang (2006), ‘A vector projection method to evaluating machine
tool alternatives for green manufacturing’, Proceedings of the International
Conference on Technology and Innovation, pp.640–643.
[62]. Jay Lee, Jun Ni, Dragan Djurdjanovic, Hai Qiu and Haitao Liao, (2006),
‘Intelligent prognostics tools and e-maintenance’, Computers in Industry,
Vol.57, No.6, pp.476– 489.
[63]. Jae Hong Suh, Soundar R.T. Kumara and Shreesh P. Mysore ( 1999),
‘Machinery Fault Diagnosis and Prognosis: Application of Advanced Signal
Processing Techniques’, CIRP Annals - Manufacturing Technology, Vol.48,
No.1, pp. 317–320.
[64]. Jihong Yan and Jay Lee (2007), ‘A Hybrid Method for On-line Performance
Assessment and Life Prediction in Drilling Operations’, Proceedings of the
IEEE International Conference on Automation and Logistics, Jinan, pp.2500–
2505.
105
[65]. Jihong Yan, Muammer Koç and Jay Lee (2004), ‘A prognostic algorithm for
machine performance assessment and its application’, Production Planning &
Control: The Management of Operations , Vol.15, No. 8, pp.796–801.
[66]. Jesuthanam C.P., Kumanan S., and Asokan P. (2007), ‘Surface roughness
prediction using hybrid neural networks’, Machining Science and Technology:
An International Journal , Vol. 11, No.2, pp.271–286.
[67]. Jones B., Jenkinson I., Yang Z., and Wang J. (2010), ‘The use of Bayesian
network modelling for maintenance planning in a manufacturing industry’,
Reliability Engineering and System Safety, Vol.95, No.3, pp.267–277.
[68]. Kanari N., Pineau J-L., and Shallari S. (2003), ‘End-of-life vehicle recycling
in the European Union’, Journal of the Minerals, Metals and Materials
Society,Vol.55, No.5, pp.15-19.
[69]. Kara S., and Li W. (2011), ‘Unit process energy consumption models for
material removal processes’, CIRP Annals - Manufacturing Technology,
Vol.60, No.1, pp.37–40.
[70]. Kara S., Mazhar MI., Kaebernick H and Ahmed H. (2005), ‘Determining the
reuse potential of components based on life cycle data’, Annals of the CIRP,
Vol. 54,No.1, pp. 154-161.
[71]. Kyoung-Jae Kim (2003), ‘Financial time series forecasting using support
vector machines’, Neurocomputing, Vol.55, No.(1–2), pp.307–319.
[72]. Krishnan N., and Sheng P.S. (2000), ‘Environmental versus Conventional
Planning for Machined Components’, CIRP Annals - Manufacturing
Technology, Vol.49, No.1, pp.363–366.
[73]. Klausner M., Grimm W., a n d Hendrickson M.C. (1998), ‘Reuse of
electric motors in consumer products’, Journal of Industrial Ecology, Vol.2,
No.2, pp.89–102.
[74]. Kaebernick H., Anityasari M., and Kara S. (2002), ‘A Technical and
economic model for end-of-life options of industrial products’, International
Journal of Environment and Sustainable Development, Vol.1, No.2, pp. 171–
183.
106
[75]. Kaiser K.A., and Gebraeel N.Z. (2009), ‘Predictive Maintenance Management
Using Sensor-Based Degradation Models’, IEEE Transactions on Systems, Man
and Cybernetics, Part A: Systems and Humans, Vol.39, No.4, pp.840–849.
[76]. Kocijan J., and Tanko V. (2011), ‘Prognosis of gear health using Gaussian
process model’, Proceedings of the IEEE International Conference on
Computer as a Tool, pp.1–4.
[77]. Lajis M.A., Mustafizul Karim A.N., Nurul Amin A.K.M., Hafiz A.M.K., and
Turnad L.G. (2008), ‘Prediction of tool life in end milling of hardened steel
AISID2’, European Journal of Scientific Research, Vol.4, pp.592–602.
[78]. Levitin G. (2005), ‘Universal generating function in reliability analysis and
optimization’, London, Springer-Verlag.
[79]. Lee K.C., Ho S.J., and Ho S.Y. (2005), ‘Accurate estimation of surface
roughness from Texture features of the surface image using an adaptive nero-
fuzzy inference system’, Precision Engineering, Vol.29, No.1, pp. 95–100.
[80]. Lee J. (1997), ‘Strategy and challenges on remote diagnostics and maintenance
for manufacturing equipment’, Annual Proceedings of Reliability and
Maintainability Symposium, Virginia, pp.368–370.
[81]. Li C.J., and Lee H. (2005), ‘Gear fatigue crack prognosis using embedded
model, gear dynamic model and fracture mechanics’, Mechanical Systems and
signal Processing, Vol.19, No.4, pp.836–846.
[82]. Liao H.T., Elsayed E.A., and Chan L.Y. (2006), ‘Maintenance of continuously
monitored degrading systems’, European Journal of Operational Research,
Vol.175, No.2, pp.821–835.
[83]. Lim J., and Park D.H. (1995), ‘Trend change in mean residual life’, IEEE
Transactions on Reliability, Vol.44, No.2, pp.291–296.
[84]. Liang F., Xu M., and Shun Q. (2000), ‘Competitive supervised learning
algorithms in machine condition monitoring’, International Journal of
COMADEM, Vol.3, No.1, pp.39–46.
[85]. Liu E., and Du Zhang (2002), ‘Diagnosis of component failures in the Space
Shuttle main engines using Bayesian belief networks: a feasibility study’,
107
Proceedings of the 14th IEEE International Conference on Tools with Artificial
Intelligence, Boston, pp.181–188.
[86]. Marksberry P.W., and Jawahir I.S. (2008), ‘A comprehensive tool-wear/tool-
life performance model in the evaluation of NDM (near dry machining) for
sustainable manufacturing’, International Journal of Machine Tools and
Manufacture, Vol.48, No.7-8, pp.878– 886.
[87]. Maria Anityasari and Hartmut Kaebernick (2008), ‘A concept of reliability
evaluation for reuse and remanufacturing’, International Journal of Sustainable
Manufacturing, Vol.1, No.1, pp.3–17.
[88]. Maity K.P., Swain P.K. (2008), ‘An experimental investigation of hot
machining to predict tool life’, Journal of materials processing technology,
Vol.198, No.3, pp.344– 349.
[89]. Ming-Yi You and Guang Meng, (2011), ‘Updated proportional hazards model
for equipment residual life prediction’, International Journal of Quality and
Reliability Management, Vol.28, No.7, pp.781–795.
[90]. Mazhar M.I., Kara S., and Kaebernick H. (2007), ‘Remaining life estimation
of used components in consumer products: Life cycle data analysis by Weibull
and artificial neural networks’, Journal of operations Management, Vol.25,
No.6, pp.1184–1193.
[91]. Maria Del Carmen Carnero Moya (2007), ‘Model for the Selection of
Predictive Maintenance Techniques’, Information Systems and Operational
Research, Vol.45, No.2, pp.83–94.
[92]. Marek Balazinski, Ernest Czogala, Krzysztof Jemielniak and Jacek Leski
(2002), ‘Tool condition monitoring using artificial intelligence methods’,
Engineering Applications of Artificial Intelligence, Vol.15, No.1, pp.73–80.
[93]. Maropoulos P.G., and Alamin B. (1996), ‘Integrated tool life prediction and
management for an intelligent tool selection system’, Journal of Materials
Processing Technology, Vol.61, No.1–2, pp.225–230.
[94]. Mangun D., Thurston D.L. (2002), ‘Incorporating component reuse,
108
remanufacture, and recycle into product portfolio design’, IEEE Transactions on
Engineering Management, Vol.49, No.4, pp.479–490.
[95]. Ming-Yi You, and Guang Meng (2011 a), ‘Updated proportional hazards
model for equipment residual life prediction’, International Journal of Quality
& Reliability Management, Vol.28, No.7, pp.781–795.
[96]. Ming-Yi You, and Guang Meng, (2011 b), ‘A generalized similarity measure
for similarity-based residual life prediction’, Journal of Process Mechanical
Engineering, Vol.225, No.3, pp.151–160.
[97]. Morgan I., Honghai Liu., Tormos B., and Sala A. (2010), ‘Detection and
Diagnosis of Incipient Faults in Heavy-Duty Diesel Engines’, IEEE
Transactions on Industrial Electronics, , Vol.57, No.10, pp.3522–3532.
[98]. Macin V., Tormos B., Sala A., and Ramirez J. ( 2006), ‘Fuzzy logic-based
expert system for diesel engine oil analysis diagnosis’, Non-Destructive Testing
and Condition Monitoring, Vol.48, No.8, pp.462–469.
[99]. Mathew S., Rodgers P., Eveloy V., Vichare N., and Pecht M. (2006), ‘A
Methodology for Assessing the Remaining Life of Electronic Products’,
International Journal of Performability Engineering , Vol.2, No.4, pp.383–395.
[100]. Marjan Golob and Boris Tovornik (2008), ‘Input–output modelling with
decomposed neuro-fuzzy ARX model’, Neurocomputing, Vol.71, No.4–6,
pp.875–884.
[101]. Matías J.M., Rivas T., Martín J.E., and Taboada J. (2008), ‘A machine
learning methodology for the analysis of workplace accidents’, International
Journal of Computer Mathematics , Vol.85, No.3–4, pp.559–578.
[102]. Nagi Gebraeel, Mark Lawley, Liu .R and Vijay Prameswaran. (2004),
‘Residual life predictions from vibration based degradation signals: A neural
network approach’, IEEE transactions on industrial electronics, Vol.51, No.3,
pp.694–700.
[103]. Nagpal G.R. (2002), ‘Tool Engineering and Design’, Khanna Publishers.
109
[104]. Nguyen T., and Nadipuram Prasad (2000), ‘Fuzzy modeling and control –
selected works of M.Sageno’, CRC Press, New York, pp.17–145.
[105]. Nancy Diaz, Seungchun Choi, Moneer Helu, Yifen Chen,Stephen Jayanathan
and Yusuke Yasui (2010), ‘Machine Tool Design and Operation Strategies for
Green Manufacturing’, Proceedings of the 4th CIRP International Conference
on High performance Cutting, pp.1–6. Springer.
[106]. Nancy Diaz., Ecena redelsheimer and david Dornfeld (2011), ‘Energy
consumption for characterization and reduction strategies for milling machine
tools use’, Globalized solutions for sustainability in manufacturing, pp.263–267,
Springer.
[107]. Om Prakash Yadav, Nanua Singh, Ratna Babu Chinnam and Parveen S.Goel
(2003), ‘A fuzzy logic based approach to reliability improvement estimation
during product development, Reliability Engineering and System Safety, Vol.80,
No.1, pp.63–74.
[108]. Orchard M.E., and Vachtsevanos G.J. (2007), ‘A particle filtering-based
framework for real-time fault diagnosis and failure prognosis in a turbine
engine’, Proceedings of the Mediterranean Conference on Control and
Automation, pp.1– 6.
[109]. Otilia Elena Dragomir, Rafael Gouriveau, Nourredine Zerhouni (2008),
‘Adaptive Neuro-Fuzzy Inference System for midterm prognostic error
stabilization’, International Journal of Computers, Communications & Control,
Vol.3, pp.271–276.
[110]. Pijnenburg M. (1991), ‘Additive hazards models in repairable systems
reliability’, Reliability Engineering and System Safety, Vol.31, No.3, pp.369–
390.
[111]. Phillip J Ross. (2005), Taguchi Techniques for quality Engineering, Tata
McGraw Hill.
110
[112]. Ping Yi Chao and Yeong Dong Hwang (1997), ‘An improvement neural
network model for the prediction of cutting tool life’, Journal of Intelligent
Manufacturing, Vol.8, No.2, pp.107–115.
[113]. Ping He, Guang Fu Liu, and Dan Zhou (2012), ‘A Decision-Making Model
of Energy-Saving Design and a Case Study’, Journal of Applied Mechanics and
Materials, Vol.130–134, pp. 1586–1589.
[114]. Parkinson G.H.J., Thompson G. (2003), ‘Analysing and taxonomy of
remanufacturing industry practice’, Proceedings of the I MECH E Part B
Journal of Engineering Manufacture, Vol.217, No.3, pp.275–280.
[115]. Paya B.A., Esat I.I., and Badi M.N. (1997), ‘Artificial neural network based
fault diagnostics of rotating machinery using wavelet transforms as a
preprocessor’, Mechanical Systems and Signal Processing, Vol.11, No.5,
pp.751–765.
[116]. Przekop L.A and Kerr S(2004), ‘Life cycle tools for future product
sustainability’, Proceedings of the IEEE International symposium on Electronics
and the environment, pp.23-26.
[117]. Rajesh Kumar Bhushan (2013), ‘Optimization of cutting parameters for
minimizing power consumption and maximizing tool life during machining of
Al alloy SiC particle composites’, Journal of Cleaner production, Vol.39,
pp.242–254.
[118]. Rommert Dekker (1996), ‘Applications of maintenance optimization models:
a review and analysis’, Reliability Engineering & System Safety, Vol.51, No.3,
pp.229–240.
[119]. Sahin Y.(2009), ‘Comparison of tool life between ceramic and cubic boron
nitride (CBN) cutting tools when machining hardened steels’, Journal of
Materials Processing Technology, Vol.209, No.7, pp.3478–3489.
[120]. Salat R., and Osowski S. (2004), ‘Accurate fault location in the power
transmission line using support vector machine approach, IEEE Transactions
on Power Systems, Vol.19, No.2, pp.879–886.
111
[121]. Satchidanananda Mishra, Michale Pect, Ted Smith, Ian McNee and Roger
Harris (2002), ‘Remaining life prediction of electronic products using life
consumption monitoring approach’, European Microelectronics Packing and
Interconnection Symposium, Cracow, Poland, pp.136–142.
[122]. Siddiqui M.M., and Caglar M. (1994), ‘Residual Lifetime Distribution and its
Applications’, Microelectronics Reliability, Vol.34, No.2, pp.211–227.
[123]. Sidda Reddy B., Suresh Kumar J., Vijaya Kumar Reddy and Padmanabhan
G. (2009), ‘Application of soft computing for the prediction of warpage of
plastic injection molded parts’, Journal of Engineering science and Technology
review, Vol.2, No.1, pp.52–62.
[124]. Saha B., Goebel K., Poll S., and Christophersen J. (2009), ‘Prognostics
methods for battery health monitoring using a Bayesian framewor’, IEEE
Transactions on Instrumentation and measurement, Vol.58, No.2, pp.291–296.
[125]. Schneider E.L, Kindlein Jr. W., Souza S., and Malfatti C.F. (2009),
‘Assessment and reuse of secondary batteries cells’, Journal of Power Sources,
Vol.189, No.2, pp.1264–1269.
[126]. Srinivas J., Rama Kotaiah. (2005), ‘Tool wear monitoring with indirect
methods’, Manufacturing Technology Today, Vol.4, pp.7–9.
[127]. Shaw M.C. (1991), ‘Metal Cutting Princlpes’, Oxford, NY.
[128]. Sheng P., Srinivasan M., and Kobayashi S. (1995), ‘Multi-objective process
planning in environmentally conscious manufacturing: a feature-based
approach’, CIRP Annals - Manufacturing Technology, Vol.44, No.1, pp.433–
437.
[129]. Sivarao (2009), ‘Mamdani fuzzy inference system modeling to predict
surface roughnes in laser machining’, International Journal of Intelligent
Information Technology Application, Vol.2, No.1, pp.12–18.
112
[130]. Sikorska J.Z., Hodkiewicz M., and Ma L. (2011), ‘Prognostic modeling
options for Remaining useful life estimation by industry’, Mechanical Systems
and Signal Processing, Vol.25, No.5, pp.1803–1836.
[131]. Sathiyasekar K., Thyagarajah K., and Krishnan A. (2011), ‘Nero fuzzy based
predict the insulation quality of high voltage rotating machine’, Expert Systems
with Applications, Vol.38, No.1, pp.1066–1072.
[132]. Sivarao, Castillo and Taufik (2009), ‘Machining quality predictions:
comparative analysis of neural net work and fuzzy logic’, International Journal
of Electrical & Computer Sciences, Vol.9, No.9, pp.451–456.
[133]. Smola A.J., and Scholkopf B. (1998), ‘A tutorial on support vector
regression’, NeuroCOLT2 Technical report series, NC2-TR-1998-030, ESPRIT
Working Group in Neural and Computational Learning.
[134]. Smita B Brunnermeier and Mark A Cohen (2003), ‘Determinants of
environmental innovation in US manufacturing industries’, Journal of
Environmental Economics and Management, Vol.45, No.2, pp. 278–293.
[135]. Samanta B., and Al-balushi K.R. (2003), ‘Artificial neural network based
fault diagnostics of rolling element bearings using time-domain features’,
Mechanical Systems and Signal Processing, Vol.17, No.2, pp.317–328.
[136]. Satish B., and Sarma N.D.R. (2005), ‘A fuzzy BP approach for diagnosis and
prognosis of bearing faults in induction motors’, Proceedings of the IEEE
Conference on Power Engineering Society General Meeting, Vol.3, pp.2291–
2294.
[137]. Shunfeng Cheng and Pecht M. (2009), ‘A fusion prognostics method for
remaining useful life prediction of electronic products’, Proceedings of the IEEE
International Conference on Automation Science and Engineering, pp.102–107.
[138]. Shangguan D (2004), ‘ Environmental leadership in electronic
manufacturing: lead-free and beyond’, Proceedings of the IEEE international
symposium on Electronics and the Environment, pp 33-39.
[139]. Tan X.C., Liu F., Cao H.J., and Zhang H. (2002), ‘A decision-making
framework model of cutting fluid selection for green manufacturing and a case
113
study’, Journal of Materials Processing Technology, Vol.129, No.1-3, pp.467–
470.
[140]. Tan X.C., Liu F., and Li C. (2008), ‘A decision-making framework model of
cutting tool selection for green manufacturing and its application’, Journal of
Advanced Manufacturing Systems, Vol.7, No.2, pp.257–260.
[141]. Tang L.C., Lu Y., and Chew E.P. (1999), ‘Mean residual life of lifetime
distributions’, IEEE Transactions on Reliability, Vol.48, No.1, pp.73–78.
[142]. Takata S., Kimura F., Van Houten F.J.A.M., Westkämper E., Shpitalni M.,
Ceglarek D., and Jay Lee. (2004), ‘Maintenance: Changing Role in Life Cycle
Management’, CIRP Annals - Manufacturing Technology, Vol.53, No.2,
pp.643–655.
[143]. Thukaram D., Khincha H.P., and Vijaynarasimha H.P. (2005), ‘Artificial
neural network and support machine approach for locating faults in radial
distributionsystems’, IEEE Transactions on Power delivery, Vol.20, No.2,
pp.710–721.
[144]. Tugrul Ozel and Yigit Karpat (2005), ‘Predictive modeling of surface
roughness and tool wear in hard turning using regression and neural networks’,
International Journal of Machine Tools and Manufacture, Vol.45, No.4–5,
pp.467–479.
[145]. Tugrul Ozel, Yigit Karpat, Luís Figueira and Paulo Davim J. (2007),
‘Modelling of surface finish and tool flank wear in turning of AISI D2 steel with
ceramic wiper inserts’, Journal of Materials Processing Technology, Vol.189,
No.1–3, pp.192–198.
[146]. Ulas Caydas and Sami Ekici (2012), ‘Support vector machines models for
surface roughness prediction in CNC turning of AISI 304 austenitic stainless
steel’, Journal of intelligent manufacturing, Vol.23, No.3, pp.639–650.
[147]. Uluyol O., Kyusung Kim and Nwadiogbu E.O. (2006), ‘Synergistic use of
soft computing technologies for fault detection in gas turbine engines’, IEEE
Transactions on Systems, Man, and Cybernetics, Part C: Applications and
Reviews, Vol.36, No.4, pp.476–484.
114
[148]. Vachtsevanos G., Lewis F.L., Roemer M., Hess A., and Wu B. (2006),
Intelligent fault diagnosis and prognosis for engineering systems, Wiley, NY.
[149]. Van Tung Tran, Bo-Suk Yang, Myung-Suck Oh and Andy Chit Chiow Tan,
(2008), ‘Machine condition prognosis based on regression trees and one-step-
ahead prediction’, Mechanical Systems and Signal Processing, Vol.22, No.5,
pp.1179–1193.
[150]. Vapnik V. (1995), The nature of statistical learning theory, Berlin
Heidelberg, New York, Springer-Verlag.
[151]. Vapnik V., Golowich S., and Smola A. (1997), ‘Support vector method for
function approximation regression estimation and signal processing’,
Proceedings of the 1996 Neural Information Processing Systems Conference
NIPS 1996, CO, USA, MIT Press, Cambridge, pp.281–287.
[152]. Virk S.M., Muhammad A., and Martinez-Enriquez A.M. (2008), ‘Fault
Prediction Using Artificial Neural Network and Fuzzy Logic’, Proceedings of
the Seventh Mexican International Conference on Artificial Intelligence,
Atizapan de Zaragoza, pp.149–54.
[153]. Wang W., and Zhang W. (2005), ‘A model to predict the residual life of
aircraft engines based upon oil analysis data’, Naval Research Logistics,Vol.52,
No.3, pp.276–284.
[154]. Wen-Hsien Ho, Jinn-Tsong Tsai, Bor-Tsuen Lin and Jyh-Horng Chou
(2009), ‘
Adaptive network-based fuzzy inference system for prediction of
surface roughness in end milling process using hybrid Taguchi-genetic learning
algorithm’, Expert Systems with Applications, Vol.36, No.2, pp. 3216–3222.
[155]. Wang Zhaoqiang , Hu Changhua , Wang Wenbin , Si Xiaosheng , Zhou
Zhijie (2012), ‘An off-online fuzzy modelling method for fault prognosis with
an application’, Proceedings of the IEEE Conference on Prognostics and System
Health Management (PHM), Beijing, China, pp.1–7.
[156]. Witten I.H., and Frank E. (2000), ‘Data Mining: Practical Machine Learning
Tools and Techniques with Java Implementations’, Morgan Kaufmann
Publishers, SanFrancisco, CA.
115
[157]. Wei- Chiang Hong and Ping-Feng pai (2006), ‘Predicting engine reliability
by support vector Machines’, International Journal of Advanced Manufacturing
Technology, Vol.28, No.1–2, pp.154–161.
[158]. Wenjia Xu and Wenbin Wang (2012), ‘An adaptive gamma process based
model for residual useful life prediction’, Proceedings of the IEEE Conference
on Prognostics and System Health Management (PHM), Bejing, pp.1–4.
[159]. Wahyu Caesarendra, Achmad Widodo and Bo-Suk Yang (2010),
‘Application of relevance vector machine and logistic regression for machine
degradation assessment’, Mechanical Systems and Signal Processing, Vol.24,
No.4, pp.1161–1171.
[160]. Wahyu Caesarendra, Achmad Widodo and Bo-Suk Yang (2011),
‘Combination of probability approach and support vector machine towards
machine health prognostics’, Probabilistic Engineering Mechanics, Vol.26,
No.2, pp.165–173.
[161]. Xiao-Sheng Si, Chang-Hua Hu, Jian-Bo Yang, and Zhi-Jie Zhou (2011a), ‘A
New Prediction Model Based on Belief Rule Base for System's Behavior
Prediction’, IEEE Transactions on Fuzzy Systems, Vol.19, No.4, pp.636–651.
[162]. Xiao Sheng Si, Wenbin Wang, Chang_Hua Hu and Dong-Hua Zhou (2011
b), ‘Remaining useful life estimation- A review on the statistical data driven
approaches’, European Journal of Operational Research, Vol.213, No.1, pp.1–
14.
[163]. Xiaoh Wang (2009), ‘Intelligent modeling and predicting surface roughness
in end milling’, Proceedings of the fifth IEEE international conference on
Natural Computation, Tianjin, pp. 521–525.
[164]. Xiaojun Zhou, Lifeng Xi and Jay Lee (2007), ‘Reliability-centered predictive
maintenance scheduling for a continuously monitored system subject to
degradation’, Reliability Engineering and System Safety, Vol.92, No.4, pp.530 –
534.
[165]. Xu K, Xie M, Tang L.C., and Ho S.L. (2003), ‘Application of neural
networks in forecasting engine systems reliability’, Applied Soft Computing,
Vol.2, No.4, pp.255– 268.
116
[166]. Yanbin Du, Huajun Cao, and Xian Chen, and Bentao Wang (2013), ‘Reuse-
oriented redesign method of used products based on axiomatic design theory and
QFD’, Journal of Cleaner production, Vol.39, pp.79–86.
[167]. Yinhui Ao and George Qiao (2010), ‘Prognostics for drilling process with
wavelet packet decomposition’, International Journal of Advanced
Manufacturing Technology, Vol.50, No.4, pp.47–52.
[168]. Yang Xiang, Chenwen Ye and Deborah Ann Stacey (2002), ‘Application of
Bayesian Networks to Shopping Assistance’, Advances in Artificial Intelligence,
Lecture Notes in Computer Science, Vol.2338, pp.344–348.
[169]. Yong-min Yang, Zhe-xue Ge and Yong-cheng Xu (2008), ‘Fault Diagnosis
of Complex Systems Based on Multi-sensor and Multi-domain Knowledge
Information Fusion’, Proceedings of the IEEE International Conference on
Networking, Sensing and Control, pp.1065–1069.
[170]. Yasmine rosunally, Stoyan stoyanov, Chris bailey, Peter mason, Sheelagh
campbell, George monger and Iian bell (2010), ‘Bayesian Networks for
Predicting Remaining Life’, International Journal of Performability
Engineering, Vol.6, No.5, pp.499–512.
[171]. Yue Jiao, Shuting Lei, Pei Z.J., and Lee. E.S. (2004), ‘Fuzzy adaptive
networks in machining process modeling: surface roughness prediction for
turning operations’, International Journal of Machine Tools and Manufacture,
Vol.44, No.15, pp.1643–1651.
[172]. Zuperl Uros, Cus Franc and Kiker Edi (2009), ‘Adaptive network based
inference system for estimation of flank wear in end-milling’, Journal of
Materials Processing Technology, Vol.209, No.3, pp.1504–1511.
[173]. Zhao F, Chen J and Xu W (2008), ‘Condition prediction based on wavelet
packet transform and least squares support vector machine methods’,
Proceedings of the IMech E, Part E:J.Process Mechanical Engineering,
Vol.223, pp.71–79.
[174]. Zhang J. H. R. (2004), ‘A new algorithm of improving fault location based
on SVM’, Proceedings of the Eighth IEE International Conference on
Development in Power system Protection, Vol.1, pp.204–207.
117
[175]. Zhigang Tian (2009), ‘An artificial neural network method for remaining
useful life prediction of equipment subject to condition monitoring’,
International Journal of ManufacturingTechnology,
www.springerlink.com/openurl.asp/DOI 10.1007/s10845-009-0356-9.
[176]. Zhigang Tian, Lorna Wong and Nima Safaei (2010), ‘A neural network
approach for remaining useful life prediction utilizing both failure and
suspension histories’, Mechanical systems and Signal Processing, Vol.24, No.5,
pp.1542–1555.
[177]. Zhu J.Y., and Deshmukh A. (2003), ‘Application of Bayesian decision
networks to life cycle engineering in Green design and manufacturing’,
Engineering Applications of Artificial Intelligence, Vol.16, No.2, pp.91–103.