1

Regenerating Plastics to Power & Hydrogen

David Ryan CEO

R&D at University of Chester – lab and 1tpd test rig

Modular build – minimum construction 25 and 40 tonne daily capacities Minimum land take and locally permitted

DMG® Plastics Regeneration PHE 8 years into technology development Designed for any waste plastic Using non-recyclable plastics to produce

Hydrogen and power generation through ACT, controlled for target product

~25 Tonnes

~6,000 HGV milesFCEV

Private Wire or grid

Heat

~1 tonneHydrogen

Local supply

~ 1 Truck LoadMix of Plastics,

fines & contaminated

~3,000 homes

~50MWhElectricity

Heat or Cooling for industry

HEAT

Power Generation

Engine

Hydrogen Extraction

ELECTRICITY

Safety Vent

Solid Residues

Liquid Residues

Heating Gas(Start-up Only)Natural Gas

Cleaned Exhaust Gases

HYDROGEN

Oxidising Agent

Feedstock

Typical licensed application to developers and partners

DMG® Technology Equipment is modular, already used in

similar service - Operating parameters for hydrogen or power

Long range – 300 mile for HGV Less environmental footprint than batteries DMG® can provide hydrogen at fleet base

for return to base vehicles

Why Hydrogen? DMG® Technology a step on the roadmap to

hydrogen economy Hydrogen Fuel Cell Electric Vehicles are here-

zero emissions at exhaust

Technology Design now complete Operations controlled for either

power generation or Power and hydrogen generation

Gas at similar energy to natural gas Cleaned emissions fully compliant to IED Design subject to successful DNV-GL

Technology Assessment

Process Ready for Customer Use

Typical Feedstock Typical Generated Gas

Protos strategic energy hub at the core of the Northern Powerhouse

Licensing model for monetisatation Agreements for power and plastics in place

Planning and permit and FEED to follow next month

Planning permission expected in September EY exploring pipeline of project funding for UK

First Application

DMG® Plastics Regeneration Powerhouse DMG® process regenerates non-recylable mixed &

contaminated plastics with minimum land take, simplepermitting

Technology at an exciting stage, In UK partnering & co-locatedwith existing waste management services, Peel & other landdevelopers active

Actively seeking engagement of international partners in roll out Licensing model to be applied to international opportunities e.g.

South East Asian waste is c14% plastic as opposed to 4% in UK Enabling easily executed, lower cost waste plastic processing Profitable for both Developers and co-located waste hosts

AIM listing ticker : PHE DavidRyan@powerhousegroup.co.uk