Regent / 500 / 2500 Series lawn Tractors & Mower Decksdl.owneriq.net/8/8e5ffd24-499a-416c-9d8d-86df1961b1ab.pdf · Parts Manual Rev. 03/2005 Regent / 500 / 2500 Series Lawn Tractors

Parts Manual

Rev. 03/2005

Regent / 500 / 2500Series Lawn Tractors & Mower Decks

TP 400-4201-00-RG-SMA

Mfg. No. Description18HP Product

1694656 Regent, 18HP Hydro1694659 Regent, 18HP Hydro (CE)1694660 518H, 18HP Hydro1694665 2518H, 18HP Hydro1694749 Regent, 18HP Hydro1694750 518H, 18HP Hydro1694751 2518H, 18HP Hydro1694802 Regent, 18HP Hydro (CE)

Mfg. No. DescriptionMower Decks

1693792 38" Mower Deck1693794 38" Mower Deck (CE)1693960 38" Mower Deck1694333 40" Mower Deck1694334 40" Mower Deck (CE)1694377 40" Mower Deck (CE)1693795 44" Mower Deck1693885 44" Mower Deck (CE)1693961 44" Mower Deck

Table Of Contents

Torque Specification Chart ..................................................................... Inside Back Cover

PRODUCT COMPONENTS PAGESFrame Group ........................................................................................................................................................ 4Steering Group ..................................................................................................................................................... 6Engine Group - 18HP Briggs & Stratton .............................................................................................................. 8Engine Group - 18HP Briggs & Stratton .............................................................................................................. 10Engine Group - 18HP Kohler ............................................................................................................................... 14Transmission Group - Tuff Torq K-46AA ............................................................................................................. 18Transmission Group - Tuff Torq K-46Z ................................................................................................................ 22Transmission SERVICE PARTS - Tuff Torq K-46AA .......................................................................................... 24Transmission SERVICE PARTS - Tuff Torq K-46Z ............................................................................................. 28Controls Group ..................................................................................................................................................... 32Electrical Group .................................................................................................................................................... 34Hood, Dash & Fuel Tank Group .......................................................................................................................... 36Seat & Seat Deck Group ...................................................................................................................................... 38Seat Deck Group .................................................................................................................................................. 40Wheels & Tire Group ........................................................................................................................................... 42Decals Group ....................................................................................................................................................... 4438" Mower Deck - Belt, Idler Arm & Hitch Group ................................................................................................. 4638" Mower Deck - Height Adjustment & Roller Bar ............................................................................................. 4838" Mower Deck - Housing, Arbors & Blades Group ........................................................................................... 5240" Mower Deck - Belt, Idler Arm & Hitch Group ................................................................................................. 5640" Mower Deck - Belt, Idler Arm & Hitch Group ................................................................................................. 5840" Mower Deck - Height Adjustment & Roller Bar ............................................................................................. 6040" Mower Deck - Height Adjustment & Roller Bar ............................................................................................. 6440" Mower Deck - Housing, Arbors & Blades ...................................................................................................... 6840" Mower Deck - Housing, Arbors & Blades ...................................................................................................... 7044" Mower Deck - Belt, Idler Arm & Hitch Group ................................................................................................. 7244" Mower Deck - Height Adjustment & Roller Bar ............................................................................................. 7444" Mower Deck - Housing, Arbors & Blades ...................................................................................................... 78

Frame GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Torque to45 ft/lbs(61Nm)

1

4

3

5

9

6

8

21

15

11

1112

1011

13

10

137

16

20

21

19

1918

17

14

2

19

3

986696

The above parts group applies to the following Mfg. Nos.:

2005 4 © Copyright Simplicity Manufacturing, Inc. All Rights Reserved.

1694656 - Regent1694659 - Regent1694660 - 518H1694665 - 2518H1694749 - Regent1694750 - 518H

1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA

PART NO. DESCRIPTIONREF NO QTY.

Frame Group

Footnotes

1 1726966 1 FRAME ASSEMBLY2 1715015 1 PLUG, Hole3 1714418 1 PAD, Footrest RH4 1714417 1 PAD, Footrest LH5 1704351 12 FASTENER, Panel6 1935255 4 NUT, Speed 5/16-187 1719869 1 J HOOK, Hitch8 1930591 4 SCREW, Hex Head Flange Lock, 5/16-18 x 3/49 1723021 1 WRAPPER ASSEMBLY, Hydro

10 1920328 2 CAPSCREW, Hex Head, 1/2-13 x 1/211 1918431 3 WASHER12 1709235 1 SPACER13 1930644 2 NUT, Hex Head, 1/2-1314 1726768 1 CARRIER ASSEMBLY, Hydro15 1717286 1 SPACER16 1717424 1 BAR, Torsion, Hydro17 960681 1 NUT, Hex Toplock Spiralock Flange, 3/8-1618 1924356 1 WASHER19 176440 6 BUSHING20 1719868 1 SPACER21 1960614 1 CAPSCREW, Hex Head, 3/8-16 x 3, G8




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA

Steering GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Torque to28-36 ft/lbs(35-48 Nm)



Torque to17 ft/lbs(23 Nm)

10

21

3

4

5

6

8

15

16

17

18

19

14

21

10

24

25

23

26

27

29

20

32

33

28

13

97

14

25

14

22

10

22

19

10

24

12

11

12

30

31

985576




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA


Steering Group

Footnotes

1 1722738 1 STEERING WHEEL2 1722319 1 CAP3 1714400 1 TUBE4 1960540 1 PIN, Spring5 1723051 1 SHAFT & PINION ASSEMBLY6 1931350 2 CARRIAGE BOLT, 3/8-16 x 17 1703508 1 PLATE, Mounting8 1928352 2 NUT, Hex Head Whiz Lock, 3/8-169 176440 1 BUSHING

10 1960114 5 WASHER11 1919438 1 NUT, Hex Lock, 5/16-1812 1933468 2 WASHER13 1666001 2 BUSHING14 1611710 4 RING, Clipring Extension15 1920415 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/416 1922611 1 WASHER17 1723072 1 STEERING GEAR ASSEMBLY18 1713469 1 LINK, 19.66" Long19 1930645 3 NUT, Hex Flange Lock, 3/8-1620 1931335 1 CARRIAGE BOLT, 5/16-18 x 121 1721472 1 ARM & SPACER ASSEMBLYMY, LH Splined22 1960160 2 WASHER23 1919314 1 PIN, Cotter24 1721542 2 SPINDLE & CUP ASSEMBLY25 1713791 2 SPACER26 1722484 1 ROD27 1721473 1 ARM & SPACER ASSEMBLY, RH28 1664847 1 CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/429 1960268 2 CARRIAGE BOLT, 3/8-16 x 1-1/430 1921221 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/231 1673796 1 SPACER32 1710437 1 SPACER33 1935048 1 NUT, Hex Flange Lock, 5/16-18




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA

Engine Group - 18HP Briggs & StrattonNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Torque to19-23 ft/lbs (26-31) Nm



12

18

2

16

20

21

1110

8

6

4

5

16

19

24

25

28 2726

24

30

31

32

1

33

36

3

15

1413

17

22

17

23

7

9

29

35 34

986684



1694656 - Regent1694660 - 518H1694665 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA


Engine Group - 18HP Briggs & Stratton

Footnotes

1 1726370 1 VALVE-SHUT OFF2 920427 1 LOCKWASHER, External Tooth 3/83 1723213 1 SEAL, Foam4 173206 1 FILTER, Fuel5 960112 2 CLAMP, Hose Type E6 1727209 1 HOSE, 12~ Long7 1933896 1 NUT-HEX LOCK 10-24 W/NYL INSRT NC3B BLK8 1725337 1 KNOB, Slot9 1960393 1 SCREW-PAN HD PHILLIPS#10-24X1.000 BLK

10 1960498 2 CAPSCREW, Hex Washer Head 1/4-14 x 5/811 1727016 1 CABLE, Throttle Control12 * 1 ENGINE-18HP B&S INTEK SINGLE (CE)13 1666269 1 CABLE, Choke, 16~ Long14 * 1 KEY, Hydro Only15 * 1 PULLEY, Hydro Only16 1933263 3 WASHER17 1704419 2 STOP-BELT .213WIRE 3.12 ,0.75 BLK18 1930598 4 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x 1-1/219 1708264 1 WASHER-HEX 0.453ID X 1.500A/F .250TH BLK20 1918199 1 LOCKWASHER, 7/1621 960631 1 CAPSCREW, 7/16-20 x 322 1717664 1 CLUTCH-ELECTRIC REGENT,BROADMOOR OGURA23 925094 1 TIE-SELF LOCKING .184WD 7.31LG BLACK ZY24 1935255 6 NUT, Speed 5/16-1825 1723735 1 DUCT, Muffler26 1930595 2 CAPSCREW, Hex Flange Lock, 5/16-18 x 1-1/427 1705248 2 PIVOT28 1705249 2 SPACER29 1960044 2 WASHER30 1930591 4 CAPSCREW, Hex Flange Lock, 5/16-18 x 3/431 1723086 1 DUCT,Muffler, Upper32 1924856 4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1/233 1927428 2 CAPSCREW, Hex Washer Head, Taptite, 1/4-20 x 3/834 1726978 1 MANIFOLD, Pipe L.H.35 1726978 1 MANIFOLD, Pipe R.H.36 1723448 1 MUFFLER

* See specific Transaxle Drive Groups for pulley part number.

* See your local Briggs & Stratton distributor for parts.



1694656 - Regent1694660 - 518H1694665 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA






14

21

16

2

3

19

23

24

13

12

10

8

6

7

19

22

27

2831 30

29

27

32

38

43

1

46

41

44

45

4847

4

5

18

17

37

36

3233

34

3940

41

42

15

20

25

20

26

9

11

986770



1694659 - Regent

TP 400-4201-00-RG-SMA



Footnotes

1 1708405 1 VALVE-SHUT OFF2 920427 1 LOCKWASHER, External Tooth 3/83 916950 1 NUT, Hex 3/8-164 1723738 1 SEAL, Foam5 1723213 1 SEAL, Foam6 173206 1 FILTER, Fuel7 960112 2 CLAMP, Hose Type E8 1727209 1 HOSE, 12" Long9 1933896 1 NUT-HEX LOCK 10-24 W/NYL INSRT NC3B BLK

10 1725337 1 KNOB, Slot11 1960393 1 SCREW-PAN HD PHILLIPS#10-24X1.000 BLK12 1960498 2 CAPSCREW, Hex Washer Head 1/4-14 x 5/813 1727018 1 CABLE, Throttle Control14 * 1 ENGINE-18HP B&S INTEK SINGLE (CE)15 1724015 1 CABLE, Choke, 16" Long16 1930598 3 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x 1-1/217 * 1 KEY, Hydro Only18 * 1 PULLEY, Hydro Only19 1933263 3 WASHER20 1704419 2 STOP-BELT .213WIRE 3.12 ,0.75 BLK21 960361 1 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x 222 1708264 1 WASHER-HEX 0.453ID X 1.500A/F .250TH BLK23 1918199 1 LOCKWASHER, 7/1624 960631 1 CAPSCREW, 7/16-20 x 325 1717664 1 CLUTCH-ELECTRIC REGENT,BROADMOOR OGURA26 925094 1 TIE-SELF LOCKING .184WD 7.31LG BLACK ZY27 1935255 4 NUT, Speed 5/16-1828 1723735 1 DUCT, Muffler29 1930595 2 CAPSCREW, Hex Flange Lock, 5/16-18 x 1-1/430 1705248 2 PIVOT31 1705249 2 SPACER32 1723337 1 INSULATION, LH33 1921333 1 CAPSCREW, 5/16-18 X 134 1919381 1 WASHER35 1930591 2 CAPSCREW, Hex Flange Lock, 5/16-18 x 3/436 1723338 1 INSULATION, RH37 1723336 1 INSULATION38 1723086 1 DUCT,Muffler, Upper39 1715509 1 STRAP, Torque40 1919326 1 WASHER41 1917356 3 LOCKWASHER, 5/1642 1917372 1 NUT, Hex 5/16-1843 1924856 4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1/244 1927428 2 CAPSCREW, Hex Washer Head, Taptite, 1/4-20 x 3/8





1694659 - Regent

TP 400-4201-00-RG-SMA






14

21

16

2

3

19

23

24

13

12

10

8

6

7

19

22

27

2831 30

29

27

32

38

43

1

46

41

44

45

4847

4

5

18

17

37

36

3233

34

3940

41

42

15

20

25

20

26

9

11

986770



1694659 - Regent

TP 400-4201-00-RG-SMA



Footnotes

45 1723408 1 MUFFLER46 1936228 2 CAPSCREW, 5/16-18 x 3/4, G847 1720567 1 PIPE, Exhaust48 1650670 1 GASKET





1694659 - Regent

TP 400-4201-00-RG-SMA

Engine Group - 18HP KohlerNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1

2

3

4

5

40

23

17

26

2928

27

2132

34

35

9

8

41

37

2

6

24

38

36

39

14

7

121112

15

16

1313

17

10

21

18

20

2522

31

1719

30

33

42

43

986792



1694749 - Regent1694750 - 518H1694751 - 2518H

TP 400-4201-00-RG-SMA


Engine Group - 18HP Kohler

Footnotes

1 1715585 1 DUCT, Air2 960112 2 CLAMP, Hose Type E3 1718678 1 HOSE, Fuel4 1725337 1 KNOB5 1960498 2 CAPSCREW, Hex Washer Head, 1/4-14 x 5/86 173206 1 FUEL FILTER7 1726795 1 CABLE, Control Throttle, 14"8 920427 1 LOCKWASHER, External Tooth, 3/89 1708405 1 VALVE, Shut Of

10 1933263 2 WASHER, 7/1611 1704419 2 STOP, Belt12 1919381 4 WASHER, 5/1613 1917356 4 LOCKWASHER, 5/1614 1950021 2 CAPSCREW, M08-1.25 x 40MM15 1960405 2 CAPSCREW, M08-1.25 x 30MM16 905100 1 KEY17 1723497 1 PULLEY18 1927428 2 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 3/819 1708264 1 WASHER, Hex, 7/1620 1708537 1 SLEEVE, Clutch Anchor21 1935255 4 NUT, Speed, 5/16-1822 1701011 1 TIE, Wire23 1717664 1 CLUTCH, Electric24 1918199 1 LOCKWASHER, 7/1625 960631 1 CAPSCREW, 7/16-20 x 326 1717993 1 DUCT, Muffler Lower27 1930595 2 CAPSCREW, Hex Head Flange Lock, 5/16-18 x 1-1/428 1705248 2 PIVOT29 1705249 2 SPACER30 1723337 1 INSULATION, LH31 1723336 1 INSULATION, Foam, 6 x 11-3/832 1930591 2 CAPSCREW, Hex Head Flange Lock, 5/16-18 x 3/433 1723338 1 INSULATION, RH34 1717448 1 DUCT, Muffler Upper34 1723085 1 DUCT, Muffler Upper, (Export)35 1924856 4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1/236 1717429 1 MUFFLER (Domestic)36 1723408 1 MUFFLER (Export)37 * 4 NUT38 1717430 1 PIPE, Manifold39 * 1 GASKET40 * 1 ENGINE, 18HP Kohler CV492S41 1723738 1 SEAL, Ring42 1933896 1 NUT, #10-24 Nylon

* See your local Kohler distributor for parts & service.



1694749 - Regent1694750 - 518H1694751 - 2518H

TP 400-4201-00-RG-SMA

Engine Group - 18HP KohlerNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1

2

3

4

5

40

23

17

26

2928

27

2132

34

35

9

8

41

37

2

6

24

38

36

39

14

7

121112

15

16

1313

17

10

21

18

20

2522

31

1719

30

33

42

43

986792



1694749 - Regent1694750 - 518H1694751 - 2518H

TP 400-4201-00-RG-SMA


Engine Group - 18HP Kohler

Footnotes

43 1960393 1 SCREW, #10-24

* See your local Kohler distributor for parts & service.



1694749 - Regent1694750 - 518H1694751 - 2518H

TP 400-4201-00-RG-SMA

Transmission Group - Tuff Torq K-46AANOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Part offrame

45

6

78

4

15

9

14

243

1

43

33

3540

44

26

3634

16

17

42

20

19

2318

17

23

22

21

2121

21

28

31

32

29

30

33

17

10

1112

545

13

27

41

18

2318

37

39

38

25

24

48 46

47

49

986686



1694802 - Regent

TP 400-4201-00-RG-SMA


Transmission Group - Tuff Torq K-46AA

Footnotes

1 1713843 1 KNOB2 1724547 1 ROD3 1918451 2 PIN, Cotter4 1919326 2 WASHER5 1960541 1 SCREW, Hex Washer Head Taptite, 5/16-18 x 3/46 1721007 1 STOP, Bel7 1917372 1 NUT, Hex 5/16-188 1917356 1 LOCKWASHER, 5/169 1721130 1 V-BELT

10 * 1 SNAP RING11 * 1 LOCKWASHER12 * 1 SPLINE COLLAR13 * 1 PULLEY14 * 1 FAN15 1921333 1 CAPSCREW, Hex Head, 5/16-18 x 116 * 3 E RING17 1927557 5 NUT, Hex Flange Whizlock, 5/16-1818 960202 4 WASHER19 1717451 6 SPACER20 1717749 2 KEY21 960551 8 CAPSCREW, Hex Head Taptite, 5/16-18 x 2-1/222 1717427 1 ANCHOR, Torsion Bar LH23 1960585 1 CAPSCREW, Hex Head Flange Whizlock, 5/16-18 x 1-3/424 1724504 1 POD, Control Pod25 1721041 1 SPRING26 1724232 1 LINK, Transmission27 1721021 1 TRANSMISSION ASSEMBLY28 1717428 1 ANCHOR, Torsion Bar RH29 1918448 2 PIN, Cotter30 1720998 1 ROD31 1723497 1 PULLEY & HUB ASSEMBLY32 171241 1 KEY33 1935048 2 NUT, Hex Two Way Lock, 5/16-1834 1921977 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/435 1960268 1 CARRIAGE BOLT, 3/8-16 x 1-1/436 1924356 1 WASHER37 108717 1 SPACER38 1960534 1 WASHER39 1916950 1 NUT, Hex, 3/8-1640 1916965 1 LOCKWASHER, 3/841 1918447 1 PIN, Cotter42 1721005 1 ROD43 1724233 1 LEVER & CLEVIS ASSEMBLY44 1931335 1 CARRIAGE BOLT, 5/16-18 x 1



1694802 - Regent

TP 400-4201-00-RG-SMA

Transmission Group - Tuff Torq K-46AANOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Part offrame

45

6

78

4

15

9

14

243

1

43

33

3540

44

26

3634

16

17

42

20

19

2318

17

23

22

21

2121

21

28

31

32

29

30

33

17

10

1112

545

13

27

41

18

2318

37

39

38

25

24

48 46

47

49

986686



1694802 - Regent

TP 400-4201-00-RG-SMA


Transmission Group - Tuff Torq K-46AA

Footnotes

45 1924359 2 WASHER46 1726750 1 BRACKET, Switch47 1960252 2 CARRIAGE BOLT, 1/4-20 X 5/848 1960694 2 NUT, Flange, Nylon 1/4-2049 1709188 2 PLUG



1694802 - Regent

TP 400-4201-00-RG-SMA

Transmission Group - Tuff Torq K-46ZNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Part offrame

5

34

1 35

1

4

32

1

3536

33

12

3

45

1

11

9

15

16

17

18

23

21

2322

17

26

24

23

2323

23

27

30

31

28

29

17

10

1214

13

25

19

20

2320

6 7

8

986687




1694751 - 2518H

TP 400-4201-00-RG-SMA


Transmission Group - Tuff Torq K-46Z

Footnotes

1 1919326 5 WASHER2 1960541 1 SCREW, Hex Washer Head Taptite, 5/16-18 x 3/43 1721007 1 STOP, Bel4 1917372 2 NUT, Hex 5/16-185 1917356 2 LOCKWASHER, 5/166 1960694 2 NUT, Flange, Nylon 1/4-207 1726488 1 BRACKET, Switch8 1960252 2 CARRIAGE BOLT, 1/4-20 X 5/89 1721130 1 V-BELT

10 * 1 SNAP RING11 1921333 1 CAPSCREW, Hex Head, 5/16-18 x 112 * 1 LOCKWASHER13 * 1 PULLEY14 * 1 SPLINE COLLAR15 * 1 FAN16 * 3 E RING17 1927557 5 NUT, Hex Flange Whizlock, 5/16-1818 1721005 1 ROD19 1918447 1 PIN, Cotter20 960202 4 WASHER21 1717451 6 SPACER22 1717749 2 KEY23 960551 8 CAPSCREW, Hex Head Taptite, 5/16-18 x 2-1/224 1717427 1 ANCHOR, Torsion Bar LH25 1721020 1 TRANSMISSION ASSEMBLY26 1960585 1 CAPSCREW, Hex Head Flange Whizlock, 5/16-18 x 1-3/427 1717428 1 ANCHOR, Torsion Bar RH28 1918448 2 PIN, Cotter29 1720998 1 ROD30 1723497 1 PULLEY & HUB ASSEMBLY31 905100 1 KEY32 1935048 1 NUT, Hex Two Way Lock, 5/16-1833 1721097 1 CONTROL, Rod34 1931335 1 CARRIAGE BOLT, 5/16-18 x 135 1703900 2 SPACER36 1921977 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/4




1694751 - 2518H

TP 400-4201-00-RG-SMA

Transmission SERVICE PARTS - Tuff Torq K-46AANOTE: Unless noted otherwise, use the standard hardware torque specification chart.

SEAL SIDE; OUTER

PLATE OF SMALLER INNER DIA.SHOULD CONTACT PISTONS.

THICKER PLATE

1721021



1694802 - Regent

TP 400-4201-00-RG-SMA


Transmission SERVICE PARTS - Tuff Torq K-46AA

Footnotes

1 1724316 2 SNAP RING2 1724312 2 SPLINE COLLAR3 1724315 1 LOCKWASHER4 1724313 1 PULLEY5 1724314 1 FAN6 1718076 3 RING7 1724291 1 PUMP SHAFT8 1724283 1 SEAL9 1708650 1 RING, Snap

10 1708673 1 BEARING11 1724282 1 SEALING CAP12 1724279 2 MAGNET13 1724280 1 HOLDER, Magnet14 1718052 1 VENT VALVE15 1724310 1 PIN16 1724306 1 ARM, Brake17 1724311 2 PIN, Spring18 1708690 2 "O" RING19 1724308 1 RETURN SPRING20 1720814 2 BUSHING21 1718111 2 SEAL22 1724307 1 SHAFT, Brake23 1724305 1 SHOE, Brake24 1724309 1 ACTUATOR, Brake25 1724285 1 CENTER CASE26 1718070 1 PIN27 1720805 3 BOLT28 1718071 1 FILTER29 1718084 1 WASHER30 1724292 1 CYLINDER BLOCK31 1718078 1 BEARING32 1718077 1 HOUSING33 1724293 1 SHAFT MOTOR34 1708672 1 RING, SNAP35 1718083 1 BEARING36 1724294 1 MOTOR GEAR37 1720439 2 WASHER38 1724301 1 REDUCTION GEAR39 1724299 1 COLLAR, Fina40 1724302 1 FINAL PINION41 1724300 1 REDUCTION SHAFT42 1724303 1 AXLE SHAFT43 1718110 2 BUSHING44 1718112 2 THRUST WASHER



1694802 - Regent

TP 400-4201-00-RG-SMA

Transmission SERVICE PARTS - Tuff Torq K-46AANOTE: Unless noted otherwise, use the standard hardware torque specification chart.

SEAL SIDE; OUTER


THICKER PLATE

1721021



1694802 - Regent

TP 400-4201-00-RG-SMA


Transmission SERVICE PARTS - Tuff Torq K-46AA

Footnotes

45 1718113 2 RING46 1724297 2 DIFFERNIAL PINION47 1724298 1 FINAL GEAR48 1724304 1 AXLE SHAFT R49 1707789 14 SCREW, Tapping50 1724323 2 WASHER, Seal51 1724324 2 SCREW, Cap52 1724284 2 TAPPING SCREW53 1724278 1 LOWER HOUSING54 1724287 2 IDS SPRING55 1724288 2 BALL56 1724286 2 IDS VALVE57 1724296 1 SPRING PIN58 1724295 1 CONTROL ARM59 1708684 2 SPRING60 1724289 1 CYLINDER BLOCK61 1724290 1 SPRING, Pump62 1718088 1 THRUST PLATE63 1718086 1 BEARING64 1718087 1 THRUST PLATE65 1720426 1 SWASH PLATE66 1718089 2 THRUST METAL67 1718061 1 RING68 1720427 1 PLUG69 1724318 1 OIL SEAL70 1724317 1 UPPER HOUSING71 1724281 1 SHAFT, Bypass72 1708691 2 "O" RING73 1707839 1 SPRING PIN74 1720421 1 PIN75 1720418 1 LEVER76 1724319 1 CONTROL SHAFT77 1720432 2 WASHER78 1724320 2 FRICTION PLATE79 1724321 1 CONTROL LEVER80 1718100 1 PIN, Roll81 1720422 1 STUD BOLT82 1720429 1 COLLAR83 1720430 1 SPRING, Friction84 1720431 1 WASHER85 1720437 1 LOCK NUT



1694802 - Regent

TP 400-4201-00-RG-SMA

Transmission SERVICE PARTS - Tuff Torq K-46ZNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

SEAL SIDE; OUTER


THICKER PLATE

1721020




1694751 - 2518H

TP 400-4201-00-RG-SMA


Transmission SERVICE PARTS - Tuff Torq K-46Z

Footnotes

1 1724316 1 SNAP RING2 1724313 1 PULLEY D3 1724315 1 LOCK WASHER4 1724312 2 SPLINE COLLAR5 1724314 1 FAN6 1718076 3 RING E 157 1724291 1 PUMP SHAFT8 1724283 1 SEAL TC 1535079 1708650 1 RING, SNAP C 35

10 1718083 1 BEARING 6202C311 1724282 1 SEALING CAP 3012 1724279 2 K50 MAGNET13 1724280 1 HOLDER MAGNET14 1718052 1 VENT VALVE 1515 1724310 1 PIN 5*3216 1724306 1 ARM BRAKE17 1724311 2 PIN SPRING 4*1618 1708690 2 O-RING 1A P1219 1724308 1 RETURN SPRING B20 1720814 2 BUSHING 19.0521 1718111 2 SEAL 19*32*822 1724307 1 SHAFT BRAKE23 1724305 1 SHOE BRAKE24 1724309 1 ACTUATOR BRAKE25 1724351 1 CENTER CASE E CMP26 1718070 1 PIN 3*9.827 1720805 3 BOLT 10*7528 1718071 1 FILTER K50 SNP29 1718084 1 WASHER 12*24*130 1724292 1 CYLINDER BLOCK31 1718078 1 BEARING 5110632 1718077 1 HOUSING33 1724293 1 SHAFT MOTOR34 1708672 1 RING, SNAP S 1535 1718083 1 BEARING 6202C3U36 1724294 1 MOTOR GEAR37 1720439 2 WASHER 12*32*3.238 1724301 1 REDUCTION GEAR39 1724299 1 COLLAR, FINAL P40 1724302 1 FINAL PINION41 1724300 1 REDUCTION SHAFT42 1724303 1 AXLE SHAFT L43 1718110 2 BUSHING44 1718112 2 THRUST WASHER




1694751 - 2518H

TP 400-4201-00-RG-SMA

Transmission SERVICE PARTS - Tuff Torq K-46ZNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

SEAL SIDE; OUTER


THICKER PLATE

1721020




1694751 - 2518H

TP 400-4201-00-RG-SMA


Transmission SERVICE PARTS - Tuff Torq K-46Z

Footnotes

45 1718113 2 RING 1746 1724297 2 DIFF PINION47 1724298 1 FINAL GEAR48 1724304 1 AXLE SHAFT R49 1707789 14 SCREW, TAPPING 8*3050 1724323 2 WASHER, SEAL 851 1724324 2 SCREW, CAP 8*1252 1724284 2 TAPPING SCREW 8*5553 1724278 1 LOWER HOUSING54 1724287 2 IDS SPRING55 1724288 2 BALL 3/1656 1724286 2 IDS VALVE 1.057 1724311 1 SPRING PIN 6.0A*3658 1724349 1 COTTER PIN59 1724343 1 CONTROL SHAFT60 1724345 1 SP (TORSION61 1724346 1 CONTROL ARM E62 1724348 1 JERKY PLATE63 1724344 1 FULCRUM (ECCENTRICIT64 1724289 1 CYLINDER BLOCK65 1724290 1 SPRING (PUMP)66 1718088 1 THRUST PLATE67 1718086 1 BEARING K8110568 1718087 1 THRUST PLATE69 1720426 1 SWASH PLATE CMP.70 1718089 2 THRUST METAL71 1718061 1 RING 1072 1708684 1 SPRING 2573 1724318 1 OIL SEAL 16*22*0374 1724317 1 UPPER HOUSING75 1707879 2 O-RING 1A P1476 1708689 1 WASHER, 1277 1708692 1 NUT 1278 1718100 1 PIN, ROLL 6*4079 1724347 1 CONTROL LEVER80 1720418 1 LEVER BYPASS81 1720421 1 PIN 3.0A*2082 1707839 1 SPRING PIN 3*1683 1708691 2 O-RING 1A P10A84 1724281 1 SHAFT (BYPASS)




1694751 - 2518H

TP 400-4201-00-RG-SMA

Controls GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Connect to Top of Frame

Connect toLanced Notchin Top of Frame

SeeTransmission

GroupPart ofFrame

1

2

14

13

12

11

23

24

19

25

6

26

27

22

10

9

876

5

4

3

30

29

28

34

33

32

31

27

26

18

16 151719

20

19

21

2415

985945




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA


Controls Group

Footnotes

1 1713855 1 KNOB2 1714385 1 ROD, Parking Brake3 165068 1 SPRING, Extension4 1717439 1 LEVER, Parking5 1921319 1 WASHER, 1/46 1663114 2 BUSHING, 21/32, Nylon7 1931355 1 CARRIAGE BOLT, 3/8-16 x 2-1/48 1717438 1 ARM, Idler9 1721133 1 PULLEY, Backside, Idler, 3-1/4 OD

10 1719590 1 SPRING, Extension11 1717440 1 ROD, Brake12 1717728 1 GUIDE BELT & STUD ASSEMBLY13 1703900 1 SPACER14 1935048 1 NUT, Hex Flange, 5/16-1815 1919438 5 NUT, Hex Lock, 5/16-1816 1919381 1 WASHER, 5/1617 1705249 1 SPACER18 1708360 1 SPRING, Compression19 1924940 3 WASHER, 5/1620 1667811 1 SPACER21 1721276 1 STOP, Belt22 1928352 1 NUT, Hex Head Whiz Lock, 3/8-1623 1921971 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/424 1916965 1 LOCKWASHER, 3/825 1721134 1 PULLEY, Idler, 3 OD26 1918451 2 PIN, Cotter, 1/8 X 3/427 1919326 2 WASHER, 5/1628 1931333 4 CARRIAGE BOLT, 5/16-18 x 3/429 1713784 1 CLAMP30 1717115 1 ROD, Clutch31 1715835 1 PAD, Reverse Pedal32 1704849 1 PAD, Brake Pedal33 1720004 1 FOOT PEDAL & BRAKE ARM ASSEMBLY34 1721577 1 PAD, Forward Pedal




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA

Electrical GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

UNDER HOOD

ToHeadlights

PTOSwitch

N.O.(Black)

N.C.(Gray)

ToChargingCircuit To

Fuel ShutoffMagneto To

Engine GND

FromBatteryNegative

UNDER FRAME

PedalSwitches

UNDER SEAT DECK

ToStarter

ToEngine GND

ToStarter

FromSolenoid

1

11

10

9

8

13

14

2

34

16

1715 23

25

23

2221

20

19

26 27

31

30

28 29

35

37

6

5

3

33

39

40

33

18

18

24

12

32

36

22

7

4

1

2

38

41

986692



1694656 - Regent1694660 - 518H1694665 - 2518H1694749 - Regent1694750 - 518H1694751 - 2518H

1694802 - Regent

TP 400-4201-00-RG-SMA


Electrical Group

Footnotes

1 1719837 1 WIRE ASSEMBLY (G & H/C)1 1726624 1 WIRE ASSEMBLY (Hydro)1 1727759 1 WIRE ASSEMBLY (H/C w/Elec Clutch)2 1715014 1 TUBE, Shrink3 1960294 1 NUT, Hex Flange, Whiz Lock, 1/4-204 1676123 1 SWITCH, Neutral Safety5 122023 1 COVER, Terminal6 172434 1 CLIP, Tinnerman7 960658 2 CAPSCREW, Round Head, Phillips, #4 - 40 x 3/48 1960547 1 LOCKWASHER, Internal Tooth, 5/89 101025 3 WASHER, 5/8

10 1717549 1 NUT, Hex, Flange, 5/8-3211 1717550 1 COVER, Ignition12 1686734 1 SWITCH, Ignition, 6-Pole (Includes Ref. 8, 9, 10, 11 & 13)13 1717163 1 IGNITION KEY (Set of 2)14 1718981 1 SWITCH, Seat15 1665237 1 WIRE ASSEMBLY16 1665238 1 CIRCUIT BREAKER17 1927429 2 CAPSCREW, Taptite Hex Washer Head, 1/4-20 x 5/818 1703484 1 CABLE, # 6 x 42-1/2 long (Solenoid to Starter)19 1686981 1 SOLENOID20 916622 2 NUT, Hex, 1/4-2021 916964 2 LOCKWASHER, 1/422 920426 2 LOCKWASHER, External Tooth, 5/1623 1716549 1 CABLE, # 6 x 10 Long, with 2 Ring Terminals24 1677296 1 BOOT, Insulator25 1920263 2 NUT, Hex, 5/16-24 NF26 921319 2 WASHER, Plain, 1/427 923341 2 CAPSCREW, Hex Head, 1/4-20 x 3/428 1919326 1 WASHER, Plain, 5/1629 1919438 1 NUT, Hex Nylon Lock, 5/16-1830 1723048 1 ROD, Battery Hold Down31 1921332 1 CAPSCREW, Hex Head, 5/16-18 x 3/432 1685215 1 BATTERY33 1723109 1 CABLE, # 6 x 52-1/2 long (Battery to Ground)34 1701011 1 TIE-SELF LOCKING (Qty 2 on Gear Models)35 1720510 1 HARNESS, Wiring36 934683 2 CLIP, Wire37 1717050 1 SWITCH, Neutral Start38 1726556 1 MODULE, No-Mow39 1720411 1 SWITCH, Pedal, N.O., Black40 1720401 1 SWITCH, Pedal, N.C., Gray41 1704379 1 SWITCH



1694656 - Regent1694660 - 518H1694665 - 2518H1694749 - Regent1694750 - 518H1694751 - 2518H

1694802 - Regent

TP 400-4201-00-RG-SMA

Hood, Dash & Fuel Tank GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Panel, Right Side

Panel, Left Side

1

2

3

4

56

714

15

18

2122

23

24

2526

8

28

2927

1618

31

30

31

25

26

19

10

98

11

1212

13

10

32

10

16

17

20

21

986688




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA


Hood, Dash & Fuel Tank Group

Footnotes

1 1674792 1 ELBOW2 1726400 1 BUSHING3 1726636 1 TANK, Fuel4 1714020 1 CAP, Fuel Tank5 1715044 1 STRAP6 1704351 1 FASTENER, Panel7 1919438 2 NUT, Hex Lock, 5/16-188 1921319 A/R WASHER, 1/4 (2 used for Hood, A/R for Bulkhead)9 1726965 1 BULKHEAD & TUBE ASSEMBLY, Electric PTO9 1726785 1 BULKHEAD & TUBE ASSEMBLY, Manual PTO

10 1960368 6 NUT, Speed11 1722737 4 SCREW, Hex Washer Head Taptite, 1/4-20 x 1/212 1925003 4 SCREW, Hex Washer Head Taptite, 1/4-20 x 1/213 176440 1 BUSHING14 1661348 2 MOLDING15 1726924 1 DASHBOARD16 1710703 2 SPACER17 1922837 2 CAPSCREW, Hex Head, 1/4 - 20 x 1-1/218 1719484 1 PANEL, Hood, LH19 1719485 1 PANEL, Hood, RH20 1714353 1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 22, 23, 24 & 25)21 1714787 2 SOCKET, Light22 1714786 1 BEZEL, Housing23 1677371 2 BULB, #115624 1714785 1 LENS, Headlight25 1920397 6 NUT, Hex Lock, 1/4-2026 1714352 1 GRILLE27 1714875 2 HINGE28 1704626 2 SPACER29 1704628 2 PIN, Quick30 1960295 6 CAPSCREW, Hex Head Flange Lock, 1/4-20 x 5/831 1719483 1 HOOD-REGENT w/LOUVERS (ORANGE)32 1727005 1 DUCT, Cooling




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA

Seat & Seat Deck GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

See Electrical Group

1

7

8

10

9

68

11 853

3

82

83

84

86

812

813

8282

986393



1694660 - 518H1694665 - 2518H

TP 400-4201-00-RG-SMA


Seat & Seat Deck Group

Footnotes

1 1725486 1 SEAT2 1919381 2 WASHER3 1716654 4 CARRIAGE BOLT, 5/16-18 x 3/44 1960486 2 SCREW, Flat Head, 5/16-18 x 1-1/45 1708360 2 SPRING, Compression6 1931277 6 NUT, Hex Head Whiz Lock, 5/16-187 1713758 2 BAR8 1930591 6 CAPSCREW, Hex Head Whiz Lock Flange, 5/16-18 x 3/49 1714317 1 DECK, Seat

10 1935255 2 NUT, Speed 5/16-1811 1670578 1 KNOB12 1725533 1 SUPPORT & PIN ASSEMBLY13 1725530 1 CLAMP & SCREW ASSEMBLY



1694660 - 518H1694665 - 2518H

TP 400-4201-00-RG-SMA

Seat Deck GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1

19

9

7

10

8

8

12

11

78

13

17

14

15

2

3

4

5

6

2

3

4

6

20

24

21

25

23

26

16

18

22

986394



1694656 - Regent1694659 - Regent1694749 - Regent1694750 - 518H1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA


Seat Deck Group

Footnotes

1 1725486 1 SEAT ASSEMBLY2 1919438 2 NUT, Hex Nylon Lock, 5/16-183 1709256 2 WASHER,5/164 1704728 2 SPRING, Seat5 1715768 1 PLATE, Spring Support6 1931333 2 CARRIAGE BOLT, 5/16-18 x 3/47 1931277 6 NUT, Hex Flange Whiz-Lock, 5/16-188 1930591 8 CAPSCREW, Hex Head Whiz Lock, 5/16-18 x 3/49 1718985 1 PAN, Seat

10 1713758 2 BAR, Seat Pivot11 1714317 1 SEAT DECK, Orange11 41714317 1 SEAT DECK, Red12 1935255 2 SPEED NUT, Tinnerman Lug Type, 5/16-1813 1960086 3 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 5/814 1708008 1 CLAMP, Wire (Middle Bolt Only)15 1919326 3 WASHER, 5/1616 1960027 3 WASHER, Plain17 1666697 3 SPACER18 1661348 2 EDGING, 3"19 1716654 4 BOLT, Shoulder, 5/16-18 x 3/420 1714318 2 SIDE PANEL, Seat Slide21 1725527 1 SLIDE, Seat22 1725526 1 PlATE, Seat Rear23 1715047 1 CAP, Seat Adjust24 1713597 1 LEVER, Seat Latch25 159106 1 SPRING, Extension26 * 1 CONTROL POD

* See Electrical Group for number.



1694656 - Regent1694659 - Regent1694749 - Regent1694750 - 518H1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA

Wheels & Tire GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1

2

5

985867W




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA


Wheels & Tire Group

Footnotes

1 1719450 2 WHEEL & TIRE ASSEMBLY, Rear 18 x 8-1/2-81 1716131 2 WHEEL & TIRE ASSEMBLY, Rear 20 x 8-82 1726303 2 WHEEL & TIRE ASSEMBLY, Front 15 x 6-62 1726302 2 WHEEL & TIRE ASSEMBLY, Front 15 x 6-1/2-63 1960160 4 WASHER, 3/44 1722675 4 CAP, Hub5 960202 4 WASHER, 3/46 927794 4 E RING




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA

Decals GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

STOP ENGINE.MOTOR STOPPEN.MOTOR ANHALTEN.STOP MOTOR.ARRETER LE MOTEUR.FERMARE MOTORE.

PUSHDUWENSCHIEBENSKUBPOUSSERSPINGERE

DRIVERIJDEN FAHRENKØRCONDUIREGUIDARE

DO NOT TOW!NIET SLEPEN!NICHT SCHLEPPEN!IKKE BUGSERE!NE PAS REMORQUER!NON TRAINARE!

THROTTLEChoke

Fast

Sl ow

To Start Engine

When Operator Leaves Seat

Traction Control

• Seat m ust be occupied, gr ound speed cont r ol in neut r al, PTO m ust be of f , and clut ch/ br ake pedal depr essed.

• Put gr ound speed cont r ol in neut r al, t ur n PTO of f , and set par king br ake.

• To st op t r act or m ot ion, f ully depr ess c lut ch/ br ake pedal.• On hydr ost at ic dr ive t r act or s, m ovem ent of t r act ion f r om neut r al, in eit her dir ect ion, incr eases gr ound speed.

Cl ut ch/ Br ake Pedal• Depr ess clut ch/ br ake pedal t o slow or st op t r act or mot ion.To SET P ar ki ng Br ake• Depr ess clut ch/ br ake pedal and pull knob UP.To RELEASE Par ki ng Br ake • Depr ess clut ch/ br ake pedal and push knob DOW N.

I gni t i on Sw i t chPTO Lever

Di sengage Engage

To Operate PTO C lutch• The oper at or m ust be in seat .• To engage PTO push PTO Lever f or war d.• To disengage PTO pull PTO Lever r ear war d.

Cut t i ng H ei ght

Adj ust m entMower DOW N

Mower UP

2

3

4

13

116 5

3

13

4

9

10

10

5

21

5

12

8

7

1

5

6

4

4

4

14

14

985867D




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA


Decals Group

Footnotes

1 1719635 1 DECAL, Transmission Release Valve2 1708927 1 DECAL, USA Logo3 1725157 1 DECAL, Drive Belts, Mower Blades4 1726985 1 DECAL, Operating Instructions (DOM)(Simplicity)4 1727829 1 DECAL, Operating Instructions (CE)(Simplicity)4 1726988 1 DECAL, Operating Instructions (CE)(Simplicity)4 1726987 1 DECAL, Operating Instructions (CE)(Simplicity)4 1719519 1 DECAL, Operating Instructions (AGCO)4 1720625 1 DECAL, Operating Instructions (CE) (AGCO)4 1720944 1 DECAL, Operating Instructions (AGCO)4 1716530 1 DECAL, Operating Instructions (AGCO)4 1722814 1 DECAL, Operating Instructions (AGCO)4 1723731 1 DECAL, Operating Instructions (AGCO)4 1726986 1 DECAL, Operating Instructions (AGCO)5 1722551 3 DECAL, Simplicity6 1720454 1 DECAL, Touch up Paint (Simplicity, AGCO)6 1725072 1 DECAL, Touch up Paint (Massey)7 1713054 1 DECAL, Patent8 1719776 1 DECAL, PTO Control9 1722772 1 DECAL, Regent

10 1722779 1 DECAL, 18HP (Simplicity)10 1722548 1 DECAL, 15HP (AGCO)10 1722549 1 DECAL, 16HP (AGCO)10 1722550 1 DECAL, 17HP (AGCO)10 1727218 1 DECAL, 518 (AGCO)10 1727219 1 DECAL, 2518 (Massey)11 1719517 1 DECAL, Stripe L.H. (Simplicity)11 1722557 1 DECAL, Stripe L.H. (AGCO)11 1720515 1 DECAL, Stripe L.H. (Massey)12 1719516 1 DECAL, Stripe R.H. (Simplicity)12 1722558 1 DECAL, Stripe R.H. (AGCO)12 1720516 1 DECAL, Stripe R.H. (Massey)13 1717692 1 DECAL, Simplicity, Icon13 1708926 2 DECAL, AGCO13 1714363 2 DECAL, Massey Ferguson14 1722720 2 DECAL, 515 (AGCO)14 1722722 2 DECAL, 516 (AGCO)14 1722724 2 DECAL, 517 (AGCO)

- 1666816 0 GREASE, Multi Purpose- 1663553 0 LUBRICANT, Anti Seize- 1666820 0 OIL, 10W-30




1694751 - 2518H1694802 - Regent

TP 400-4201-00-RG-SMA

38" Mower Deck - Belt, Idler Arm & Hitch GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Hook Spring (Ref 24)here when assembled.

Hook Spring (Ref 9)to capscrew & nutwhen assembled.

Insert MustFace Out

1

2

3

4 5

6

7

8

9

10

14

11

1213

1516

27

1718

19

21

22

23

24

26

2

12

11

1

2

25

20

985293



1693792 - 38" Mower1693794 - 38" Mower1693960 - 38" Mower

TP 400-4201-00-RG-SMA


38" Mower Deck - Belt, Idler Arm & Hitch Group

Footnotes

1 1928957 2 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 G82 1922755 4 WASHER, Plain, 3/83 1677135 1 GUARD, Spring4 1666294 1 SPACER5 1685150 1 PULLEY ASSEMBLY KIT, (Includes Ref. No. 4)6 1665835 1 GRIP, Lever7 1916965 1 LOCKWASHER, 3/88 1916950 1 NUT, Hex, 3/8-169 1715435 1 SPRING, Idler Arm

10 1919439 1 NUT, ESNA Hex Lock, 3/8-1611 1924356 2 WASHER , 3/812 1663114 2 BUSHING, 5/8, Nylon13 912808 1 FITTING, Grease14 * 1 CLUTCH LEVER ASSEMBLY, See Ref. No. 2515 1657242 1 SPACER16 1960339 1 NUT, Hex Flange Lock, 3/8-1617 1924940 2 WASHER, Plain, 3/818 157081 2 SPACER19 1921968 2 CAPSCREW, Hex Head, 3/8-16 x 1-3/820 1713561 1 HITCH21 1713578 1 ROD, Mower Hitch22 1715759 1 ROD, Latch23 1960519 1 NUT, Push, 1/224 156302 1 SPRING, Hitch Release25 1704520 1 CLUTCH LEVER ASSEMBLY w/ BUSHINGS, (Includes Ref. Nos. 12, 13, and 14)26 1716854 1 V-BELT, Arbor Drive27 960641 2 NUT, Hex Lock Aluminum Insert, 3/8-16

* Not Serviced Separately.




TP 400-4201-00-RG-SMA

38" Mower Deck - Height Adjustment & Roller BarNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Note: Apply Locktite380 in Hole prior toassembling on rod. Insert Must

Face Out

44

3840

54

53

1

23 4

5

6

74

9

10

11 12

13

1617 20

18

21

24

2223

2526

55

28

27

29 30

2944 31

38

3940

8

41

33342043

44434343

4546

47

42

25

35

35

37

34

33

32

36

14

15

56

19

4849

5052

51

50

35

85777AA




TP 400-4201-00-RG-SMA


38" Mower Deck - Height Adjustment & Roller Bar

Footnotes

1 1664847 3 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/42 1714910 1 BRACKET, Upstop3 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/44 1960044 8 WASHER, 5/165 1960074 1 CLIP, Spring6 1714529 1 ROD, Transport7 1710703 2 SPACER8 1960027 2 WASHER, 1/29 1923362 2 NUT, Hex Lock, 5/16-18

10 1720372 1 U-BRACKET11 1960655 1 CARRIAGE BOLT, 5/16-18 x 1-1/412 1717297 1 ARM, Rear13 1924856 2 CAPSCREW, Hex Head, Taptite, 5/16-18 x 1/214 1721635 1 BRACKET, Decal15 1720919 1 DECAL, Height16 1721634 1 ROD, Latch17 1931350 1 CARRIAGE BOLT, 3/8-16 x 118 1724493 1 ROCKER ARM ASSEMBLY19 1920397 1 NUT, Hex Lock, 1/4-2020 1919439 2 NUT, HEx Lock ESNA, 3/8-1621 1665374 1 STRAP22 1714879 1 ECCENTRIC23 1924874 1 WASHER, Flat, 5/1624 1930601 2 CAPSCREW, Taptite Hex Washer Head, 5/61-18 x 7/825 960643 3 NUT, Hex, Flange Collar Lock, 5/16-1826 960641 2 NUT, Hex Lock, Aluminum Insert, 3/8-1627 1960594 1 CAPSCREW, Hex Head Taptite, 5/16 x 7/828 1704082 1 NUT, Adjuster29 1960236 4 SPACER30 1719846 1 BAR, Roller, Support31 1921333 2 CAPSCREW, Hex Head, 5/16-18 x 132 1960373 2 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 133 1960520 2 PUSHNUT, 5/8"34 1717675 2 ROLLER, End35 1924366 3 WASHER, 5/836 1668513 8 ROLLER37 1719905 1 SHAFT ASSEMBLY38 1960288 2 PIN39 1960221 2 CLIP, Hair40 1714760 2 GAUGE WHEEL41 158399 2 E-RING, 1/242 1714878 2 ARM ASSEMBLY, Adjustable43 1924940 4 WASHER, Flat, 3/844 1611705 1 SPACER




TP 400-4201-00-RG-SMA


Note: Apply Locktite380 in Hole prior toassembling on rod. Insert Must

Face Out

44

3840

54

53

1

23 4

5

6

74

9

10

11 12

13

1617 20

18

21

24

2223

2526

55

28

27

29 30

2944 31

38

3940

8

41

33342043

44434343

4546

47

42

25

35

35

37

34

33

32

36

14

15

56

19

4849

5052

51

50

35

85777AA




TP 400-4201-00-RG-SMA



Footnotes

45 1715024 1 SPACER46 1923701 1 CAPSCREW, Hex Head, 3/8-16 x 247 1721081 1 ARM, Pitch48 1720599 1 LATCH49 1921159 1 CAPSCREW, Hex, 1/4-20 x 2-1/450 1918265 2 WASHER51 1723321 1 SPRING, Compression52 1960674 1 PUSH NUT, 1/453 1713995 1 GRIP54 1723124 1 BUTTON55 1721620 1 HANDLE ASSEMBLY56 1931352 1 CARRIAGE BOLT, 3/8-16 x 1-1/2




TP 400-4201-00-RG-SMA

38" Mower Deck - Housing, Arbors & Blades GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Viewed From Bottom

Torque to50-70 ft/lbs

ExportOnly

Note: 2 for Export1 for Domestic

Torque to 45-55 ft. lbs.

10

22

8

11

1223

4

5

6

778

9

10

1213

15

16

1717

1818

1919

22

23

24

2223

24

2526

2727,14

28

29

3030

3233

31

34

35

11

9

77

6

36

3534

5

37

38

1513 1

2021

29

39393939

25252516

25

25

3939

2525

4043

42

42

41

30

30

985780




TP 400-4201-00-RG-SMA


38" Mower Deck - Housing, Arbors & Blades Group

Footnotes

1 1714419 2 NUT, Hex, Flange, 9/16-82 1713675 4 WASHER, Belleville3 1720387 1 PULLEY, LH, 4" OD4 1917372 1 NUT, Hex, 5/16-185 1713616 2 HUB6 1713199 2 COVER, Arbor Housing7 1705897 4 BEARING8 1713204 2 SPACER9 1707335 2 GASKET, Foam

10 1713338 2 ARBOR HOUSING ASSEMBLY (Includes Fitting Ref. No. 11)11 1704314 2 FITTING, Grease12 1714321 1 STOP, Belt, LH13 1927557 4 NUT, Hex, Whiz Lock, 5/16-1814 1931320 2 CARRIAGE BOLT, 1/4-20 x 1-1/4, (CE)15 1924940 4 WASHER, Flat, 3/816 960678 1 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1-3/417 1713619 2 WASHER18 1713612 2 SHAFT, Arbor19 1713196 2 SHIELD, Grass, Lower20 1704856 1 BLADE, Mower, 16-1/821 1704101 1 BLADE, Mower, 22-1/422 1713089 2 WASHER, Hex23 1656916 2 WASHER, Spring24 923471 2 CAPSCREW, Hex Head, 7/16-14 x -1/425 1664847 7 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/426 1686826 1 MOWER DECK HOUSING, 38", Orange26 41686826 1 MOWER DECK HOUSING, 38", Red26 61686826 1 MOWER DECK HOUSING, 38", Black27 1931318 2 CARRIAGE BOLT, 1/4-20 x 7/827 1931320 2 CARRIAGE BOLT, 1/4-20 x 1-1/4, (6 Total for CE)28 1705449 1 DEFLECTOR, Plastic29 1960518 2 NUT, Push On30 1960353 6 CARRIAGE BOLT, 1/4-20 x 1-1/4, (CE)31 1704873 1 CLAMP32 1919326 1 WASHER, Plain, 5/1633 1723938 1 SPRING34 1916964 2 LOCKWASHER, 1/435 1916622 2 NUT, Hex, 1/4-2036 1706709 1 ROD, Deflector, Front37 1720388 1 PULLEY, RH, 5-1/4OD38 1714322 1 STOP, Belt, RH39 1960373 4 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 140 1705115 2 PLUG, Plastic41 1721143 1 COVER ASSEMBLY, LH, (CE)




TP 400-4201-00-RG-SMA

38" Mower Deck - Housing, Arbors & Blades GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Viewed From Bottom

Torque to50-70 ft/lbs

ExportOnly

Note: 2 for Export1 for Domestic

Torque to 45-55 ft. lbs.

10

22

8

11

1223

4

5

6

778

9

10

1213

15

16

1717

1818

1919

22

23

24

2223

24

2526

2727,14

28

29

3030

3233

31

34

35

11

9

77

6

36

3534

5

37

38

1513 1

2021

29

39393939

25252516

25

25

3939

2525

4043

42

42

41

30

30

985780




TP 400-4201-00-RG-SMA


38" Mower Deck - Housing, Arbors & Blades Group

Footnotes

42 1664847 3 CARRIAGE BOLT, 1/4-20 x 1-1/4, (CE)43 1721142 1 COVER ASSEMBLY, RH, (CE)




TP 400-4201-00-RG-SMA


2

2

17

17

10

30

29

10

35

34

3332

31

10 30

2928

27

26

24

23

22 21

20

1918

17

16

15

14

13

12

1110

9

8

7

6

4

3

21

5

36

252

To Slot "A"

To Slot "B"

Slot "B"

Slot "A"

Insert MustFace Out

85688AA



1694377 - 40" Mower

TP 400-4201-00-RG-SMA



Footnotes

1 1919439 1 NUT, Hex Lock Esna Light, 3/8-162 1924940 5 WASHER, 3/83 1721710 1 PULLEY, Idler4 1721532 1 V-BELT, Arbor Drive5 1722175 1 BELT GUIDE6 1960534 2 WASHER, 3/87 1720598 1 ARM ASSEMBLY, Idler with Bushings & Fitting8 1960315 1 CARRIAGE BOLT, 3/8-16 x 29 1928957 1 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 G8

10 1922755 6 WASHER, 3/811 1715435 1 SPRING, Extension, Idler Arm12 1657242 1 SPACER, Hardened13 1719965 1 GRIP, Black Vinyl for Handle14 1922130 1 CAPSCREW, Hex Head, 3/8-16 x 2-1/415 1723952 1 PULLEY16 1667812 1 SPACER17 1928352 4 NUT, Hex Flange Whiz Lock, Large, 3/8-1618 1921969 2 CAPSCREW, Hex Head, 3/8-16 x 1-1/219 172329 2 SPACER20 1713578 1 ROD, Mower Hitch21 156302 1 SPRING, Extension, Hitch Release22 1715759 1 ROD, Latch23 1720044 1 HITCH, Mower24 1960519 1 NUT, Push25 960641 2 NUT, Hex Lock ALUM Insert, 3/8-1626 1721425 1 WASHER & NUT ASSEMBLY, 3/8 x 1-1/227 1674671 1 SPRING, Extension28 1719923 1 ARM, Idler29 1719221 2 HUB30 1719562 2 PULLEY, Idler, 22 Teeth31 1923701 1 CAPSCREW, Hex Head, 3/8-16 x 232 1930601 1 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1/233 1666697 1 SPACER34 1921971 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/435 1721118 1 BELT, Timing36 1722182 1 BELT GUIDE



1694377 - 40" Mower

TP 400-4201-00-RG-SMA


To Slot "A"

To Slot "B"

Slot "B"

Slot "A"

Insert MustFace Out

2

2

17

17

10

30

29

10

35

31

3332

31

10 30

2928

27

26

24

23

22 21

20

1918

17

16

15

14

13

12

1110

9

8

7

6

4

3

21

5

34

252

986249



1694333 - 40" Mower1694334 - 40" Mower

TP 400-4201-00-RG-SMA



Footnotes

1 1919439 1 NUT, Hex Lock Esna Light, 3/8-162 1924940 6 WASHER, 3/83 1721710 1 PULLEY, Idler4 1721532 1 V-BELT, Arbor Drive5 1722175 1 BELT GUIDE6 1960534 2 WASHER, 3/87 1724835 1 ARM ASSEMBLY, Idler with Bushings & Fitting, 38 Tooth8 1960315 1 CARRIAGE BOLT, 3/8-16 x 29 1928957 1 CAPSCREW, Hex Head, 3/8-16 x 2-3/4 G8

10 1922755 6 WASHER, 3/811 1715435 1 SPRING, Extension, Idler Arm12 1657242 1 SPACER, Hardened13 1719965 1 GRIP, Black Vinyl for Handle14 1922130 1 CAPSCREW, Hex Head, 3/8-16 x 2-1/415 1723952 1 PULLEY16 1667812 1 SPACER17 1928352 4 NUT, Hex Flange Whiz Lock, Large, 3/8-1618 1921968 2 CAPSCREW, Hex Head, 3/8-16 x 1-3/819 172329 2 SPACER20 1713578 1 ROD, Mower Hitch21 156302 1 SPRING, Extension, Hitch Release22 1715759 1 ROD, Latch23 1720044 1 HITCH, Mower24 1960519 1 NUT, Push25 960641 2 NUT, Hex Lock Aluminum Insert, 3/8-1626 1721425 1 WASHER & NUT ASSEMBLY, 3/8 x 1-1/227 1674671 1 SPRING, Extension28 1719923 1 ARM, Idler29 1719221 2 HUB30 1724802 2 PULLEY, Idler31 1923701 2 CAPSCREW, Hex Head, 3/8-16 x 232 1930601 1 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1/233 1666697 1 SPACER34 1722182 1 BELT GUIDE35 1724625 1 BELT, Timing, 38 Tooth



1694333 - 40" Mower1694334 - 40" Mower

TP 400-4201-00-RG-SMA


Apply Locktite380 in hole prior

to assembly.

From"A"

To "A"

To HandleAssy

Insert MustFace Out

44

3840

31

163 2

19

40

2829

61

60

58

59

57

56

5554

53

52

51

50

49

48

47

46

21

7

4544

43

42

39

5

7

162

3 21

38

37 36 35

3433

32

30

23

23

27

26

25

24

23222019

18

172

16

15

14

13

12

11

10

9

8

6

54

3

2

1

4145

62

7

7

7

6363

28

29

31

85689AA



1694377 - 40" Mower

TP 400-4201-00-RG-SMA



Footnotes

1 1921333 2 CAPSCREW, Hex Head, 5/16-18 x 12 1960044 5 WASHER, 5/163 1960236 4 SPACER4 1720693 1 SHAFT & BAR ASSEMBLY, 40" Roller5 1717675 4 ROLLER6 1668513 6 ROLLER7 1924366 14 WASHER, 5/88 1676652 1 SPACER9 1714529 1 ROD, Transport

10 1960074 1 CLIP, Hair Pin11 1720372 1 U-BRACKET12 1923362 2 NUT, Hex Centerlock 5/16-1813 1710703 2 SPACER14 1960044 4 WASHER, 5/1615 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/416 1960373 3 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 117 1666697 1 SPACER18 108512 1 PIVOT, 3/4 Hex19 1924940 2 WASHER, 3/820 1918447 1 PIN, Cotter21 1723409 1 BRACKET, Adjusting22 1931335 2 CARRIAGE BOLT, 5/16-18 x 123 960643 5 NUT, Hex Flange Lock, 5/16-1824 1960223 1 CARRIAGE BOLT, 5/16-18 x 1-1/425 1717145 1 ARM, 1 1/426 1714879 1 CAM, Eccentric 1 1/8 Hex27 1924874 1 WASHER, 5/1628 960643 5 NUT, Hex Collar Lock, 5/16-1829 1704351 2 FASTENER, Panel30 1720692 1 SHAFT ASSEMBLY, Rocker31 1960594 3 CAPSCREW, Hex Head, Taptite 5/16-18 x 7/832 1721852 1 UPSTOP33 1664847 8 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/434 1665374 3 STRAP, Roller Support35 1960520 1 NUT, Push 5/836 1719846 1 BAR, Roller37 960641 1 NUT, Hex Aluminum Lock, 3/8-1638 1706644 1 SPACER39 1930651 1 NUT, Hex Centerlock 3/8-1640 1720931 1 BRACKET, Height of Cut41 1720919 1 DECAL, Height of Cut42 1719261 1 ROD, Adjustment43 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/444 1706645 1 TRUNNION, Rod



1694377 - 40" Mower

TP 400-4201-00-RG-SMA



to assembly.

From"A"

To "A"

To HandleAssy

Insert MustFace Out

44

3840

31

163 2

19

40

2829

61

60

58

59

57

56

5554

53

52

51

50

49

48

47

46

21

7

4544

43

42

39

5

7

162

3 21

38

37 36 35

3433

32

30

23

23

27

26

25

24

23222019

18

172

16

15

14

13

12

11

10

9

8

6

54

3

2

1

4145

62

7

7

7

6363

28

29

31

85689AA



1694377 - 40" Mower

TP 400-4201-00-RG-SMA



Footnotes

45 1915726 2 NUT, Hex, 5/8-1146 118053 1 PIN47 1960074 1 CLIP, Hair Pin, 1/8 x 148 1917421 1 NUT, Hex Jam 3/8-1649 1960601 1 NUT, Hex Flange, 3/8-1650 108241 1 GUIDE ASSEMBLY, Rod51 1720704 1 ROD & WASHER ASSEMBLY, Adjust Handle52 1651820 1 GRIP, Black Vinyl For Rod53 1920397 1 NUT, Hex Lock Esna Light, 1/4-2054 1720599 1 LATCH, 5/16 WIRE55 1921159 1 CAPSCREW, Hex Head, 1/4-20 x 2-1/456 1721257 1 ROD, Latch57 1720695 1 HANDLE ASSEMBLY, Lift58 1676526 1 SPRING, Compression59 1918265 2 WASHER, 5/1660 1713995 1 GRIP, Black Soft for Rod61 1723124 1 BUTTON, Black Nylon for Rod62 1960674 1 PUSH NUT, 1/4



1694377 - 40" Mower

TP 400-4201-00-RG-SMA



to assembly.

From"A"

To "A"

To HandleAssy

Insert MustFace Out

44

3840

31

163 2

19

40

2859

61

60

58

57

56

5554

53

52

51

50

49

48

1

46

21

7

4544

43

42

39

5

7

162

3 215

38

37 36 35

3433

32

30

23

23

27

26

25

24

23222019

18

172

16

15

14

13

12

11

10

9

8

6

54

3

2

15

4145

62

7

7

7

2347

28

29

31

986266



1694333 - 40" Mower1694334 - 40" Mower

TP 400-4201-00-RG-SMA



Footnotes

1 1918452 2 CLIP, Hair Pin, 1/8 x 12 1960044 5 WASHER, 5/163 1960236 4 SPACER4 1720693 1 SHAFT & BAR ASSEMBLY, 40" Roller5 1717675 4 ROLLER6 1668513 6 ROLLER7 1924366 14 WASHER, 5/88 1676652 1 SPACER9 1714529 1 ROD, Transport

10 1960074 1 CLIP, Hair Pin11 1720372 1 U-BRACKET12 1923362 2 NUT, Hex Centerlock 5/16-1813 1710703 2 SPACER14 1960044 4 WASHER, 5/1615 1921977 7 CAPSCREW, Hex Head, 5/16-18 x 1-1/416 1960373 3 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 117 1666697 1 SPACER18 108512 1 PIVOT, 3/4 Hex19 1924940 2 WASHER, 3/820 1918447 1 PIN, Cotter21 1723409 1 BRACKET, Adjusting22 1931335 2 CARRIAGE BOLT, 5/16-18 x 123 1960643 5 NUT, Hex Flange Lock, 5/16-1824 1960655 1 CARRIAGE BOLT, 5/16-18 x 1-1/425 1717145 1 ARM, 1 1/426 1714879 1 CAM, Eccentric 1 1/8 Hex27 1924874 1 WASHER, 5/1628 1917356 2 LOCKWASHER, 5/1629 1704351 2 FASTENER, Panel30 1724459 1 SHAFT ASSEMBLY, Rocker31 1960594 3 CAPSCREW, Hex Head, Taptite 5/16-18 x 7/832 1721852 1 UPSTOP33 1664847 8 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/434 1665374 3 STRAP, Roller Support35 1960520 1 NUT, Push 5/836 1719846 1 BAR, Roller37 960641 1 NUT, Hex Aluminum Lock, 3/8-1638 1706644 1 SPACER39 1930651 1 NUT, Hex Centerlock 3/8-1640 1720931 1 BRACKET, Height of Cut41 1720919 1 DECAL, Height of Cut42 1719261 1 ROD, Adjustment43 1922606 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/444 1706645 1 TRUNNION, Rod



1694333 - 40" Mower1694334 - 40" Mower

TP 400-4201-00-RG-SMA



to assembly.

From"A"

To "A"

To HandleAssy

Insert MustFace Out

44

3840

31

163 2

19

40

2859

61

60

58

57

56

5554

53

52

51

50

49

48

1

46

21

7

4544

43

42

39

5

7

162

3 215

38

37 36 35

3433

32

30

23

23

27

26

25

24

23222019

18

172

16

15

14

13

12

11

10

9

8

6

54

3

2

15

4145

62

7

7

7

2347

28

29

31

986266



1694333 - 40" Mower1694334 - 40" Mower

TP 400-4201-00-RG-SMA



Footnotes

45 1915726 2 NUT, Hex, 5/8-1146 118053 1 PIN47 1935048 1 NUT, Hex Flange Lock, 5/16-1848 1917421 1 NUT, Hex Jam 3/8-1649 1960601 1 NUT, Hex Flange, 3/8-1650 108241 1 GUIDE ASSEMBLY, Rod51 1720704 1 ROD & WASHER ASSEMBLY, Adjust Handle52 1651820 1 GRIP, Black Vinyl For Rod53 1920397 1 NUT, Hex Lock Esna Light, 1/4-2054 1720599 1 LATCH, 5/16 WIRE55 1921159 1 CAPSCREW, Hex Head, 1/4-20 x 2-1/456 1721257 1 ROD, Latch57 1720695 1 HANDLE ASSEMBLY, Lift58 1723321 1 SPRING, Compression59 1917372 2 NUT, Hex, 5/16-1860 1713995 1 GRIP, Black Soft for Rod61 1723124 1 BUTTON, Black Nylon for Rod62 1960674 1 PUSH NUT, 1/4



1694333 - 40" Mower1694334 - 40" Mower

TP 400-4201-00-RG-SMA

40" Mower Deck - Housing, Arbors & BladesNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

Torque to 45-55 ft.lbs. (61-75 Nm)

3

32

1

25

41

40

39

38

3736

3534

33

32313029

28

27

2423

22

20

19

17

2624

2322

21

3320

19

17

1615

14

1312

11

10

9

8

7

6

5

4

18

18

85687AA



1694377 - 40" Mower

TP 400-4201-00-RG-SMA


40" Mower Deck - Housing, Arbors & Blades

Footnotes

1 930584 1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G82 1933263 1 WASHER, 7/163 1656916 4 WASHER, Spring4 960644 1 CAPSCREW, Hex Head, 7/16-14 x 4-1/2 G85 1713091 1 PULLEY6 1719870 1 HUB7 1719766 2 SPROCKET & FLANGE ASSEMBLY, Riveted8 1657969 2 SHIELD, Arbor Bearing, Upper9 1655729 2 HOUSING, Arbor Top

10 1707335 2 GASKET, Foam Poly11 1722396 2 ARBOR SHAFT & BEARINGS ASSEMBLY12 1703273 2 HOUSING, Arbor Bottom with Lube Fitting13 1924856 6 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1/214 1721254 1 COVER, Arbor, LH15 1686805 1 HOUSING ASSEMBLY, 40", Orange15 41686805 1 HOUSING ASSEMBLY, 40", Red15 61686805 1 HOUSING ASSEMBLY, 40", Black16 1719624 1 BLADE, Mower, LH17 1722258 2 PIN, Blade18 1677274 2 ADAPTOR, Arbor19 1722257 2 WASHER, Spline20 927120 2 CAPSCREW, Hex Head, 7/16-14 x 2-1/4 G821 1664847 12 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/422 1700230 2 WASHER, Shim23 1700229 2 SHIELD, Arbor Bearing, Lower24 1655777 2 ADAPTER, Blade25 1720600 1 DEFLECTOR, Discharge26 1719623 1 BLADE, Mower, RH27 1931335 1 CARRIAGE BOLT, 5/16-18 x 128 1931318 1 CARRIAGE BOLT, 1/4-20 x 7/829 1960518 1 NUT, Push30 1960353 2 WASHER, 1/431 1704873 1 CLAMP32 1916964 1 LOCKWASHER, Spring 1/433 1916622 1 NUT, Hex 1/4-2034 1719597 1 DOOR, Mulching, Black Plastic35 1705080 1 SPRING, Torsion36 1719617 1 ROD, Pivot37 1917372 1 NUT, Hex 5/16-1838 1917356 1 LOCKWASHER, Spring 5/1639 1919381 1 WASHER, 5/1640 1933988 1 NUT, Push41 1721255 1 COVER, Arbor, RH



1694377 - 40" Mower

TP 400-4201-00-RG-SMA


Torque to 45-55 ft.lbs. (61-75 Nm)


3

32

1

25

41

40

39

38

3736

3534

33

32313029

28

27

2423

22

20

19

17

2624

2322

21

3320

19

17

1615

14

1312

11

10

9

8

7

6

5

4

18

18

986243



1694333 - 40" Mower1694334 - 40" Mower

TP 400-4201-00-RG-SMA



Footnotes

1 1930584 1 CAPSCREW, Hex Head, 7/16-14 x 2-3/4 G82 1933263 1 WASHER, 7/163 1656916 4 WASHER, Spring4 960644 1 CAPSCREW, Hex Head, 7/16-14 x 4-1/2 G85 1713091 1 PULLEY6 1719870 1 HUB7 1724453 2 SPROCKET & FLANGE ASSEMBLY, Riveted, 38 Tooth8 1657969 2 SHIELD, Arbor Bearing, Upper9 1655729 2 HOUSING, Arbor Top

10 1707335 2 GASKET, Foam Poly11 1722396 2 ARBOR SHAFT & BEARINGS ASSEMBLY12 1703273 2 HOUSING, Arbor Bottom with Lube Fitting13 1664847 6 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/414 1721254 1 COVER, Arbor, LH15 1686976 1 HOUSING ASSEMBLY, 40", Orange15 41686976 1 HOUSING ASSEMBLY, 40", Red16 1719624 1 BLADE, Mower, LH17 1722258 2 PIN, Blade18 1677274 2 ADAPTOR, Arbor19 1722257 2 WASHER, Spline20 927120 2 CAPSCREW, Hex Head, 7/16-14 x 2-1/4 G821 1960373 12 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 122 1700230 2 WASHER, Shim23 1700229 2 SHIELD, Arbor Bearing, Lower24 1655777 2 ADAPTER, Blade25 1720600 1 DEFLECTOR, Discharge26 1719623 1 BLADE, Mower, RH27 1931335 1 CARRIAGE BOLT, 5/16-18 x 128 1931318 1 CARRIAGE BOLT, 1/4-20 x 7/829 1960518 1 NUT, Push30 1960353 2 WASHER, 1/431 1704873 1 CLAMP32 1916964 1 LOCKWASHER, Spring 1/433 1916622 1 NUT, Hex 1/4-2034 1719597 1 DOOR, Mulching, Black Plastic35 1723938 1 SPRING, Torsion36 1719617 1 ROD, Pivot37 1917372 1 NUT, Hex 5/16-1838 1917356 1 LOCKWASHER, Spring 5/1639 1919381 1 WASHER, 5/1640 1933988 1 NUT, Push41 1724601 1 COVER, Arbor, RH



1694333 - 40" Mower1694334 - 40" Mower

TP 400-4201-00-RG-SMA


To Slot "A"

Slot "A"

Arbor Drive•Pulley



Engine•Pulley Tensioning

Idler Pulley

Hook Spring (Ref 25)here when assembled.

Insert MustFace Out

23

4

5

67

8

910

11

12

13

14

1

15

133

17

18

19

2021

22

23

24

173

19

1616

985348




TP 400-4201-00-RG-SMA



Footnotes

1 1718017 1 V-BELT, Arbor Drive2 1921972 1 CAPSCREW, Hex Head, 3/8-16 x 2-1/23 1924940 3 WASHER, 3/84 171247 1 PULLEY ASSEMBLY, 5 OD5 1667812 1 SPACER6 1665835 1 GRIP, Lever7 1718020 1 ARM, Idler8 1916965 1 LOCKWASHER, Spring, 3/89 1916950 1 NUT, Hex, 3/8-16

10 1930645 1 NUT, Hex Flange Lock, 3/8-1611 1715772 1 SPRING, Idler Arm12 1960339 1 NUT, Hex, Center Lock, 3/8-1613 1924356 2 WASHER, 3/814 1714255 1 SPACER, Idler Arm15 1922605 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/416 1921968 2 CAPSCREW, Hex Head, 3/8-16 x 1-3/817 157081 2 SPACER18 1919384 1 WASHER, 3/819 960641 2 NUT, Hex Lock Aluminum Insert, 3/8-1620 1713578 1 ROD, Mower Hitch21 1715759 1 ROD, Latch22 1713561 1 HITCH23 1960519 1 NUT, Push, 1/224 156302 1 SPRING, Hitch Release




TP 400-4201-00-RG-SMA


Note: Apply Locktite380 in Hole prior toassembeling on rod

Insert MustFace Out

Insert MustFace Out

Lower holewith swing

away rollers

44

3840

1 2

34

58

4

9

6

7

1011

12

13 14

27

25

51

1

20

2122

18

26 4

23

24 25

27

17

27

19

28

32

30

31

34353638

3940

4142

43

44

1745

4647

45

4849

50

4545

304

34

3536

3636

37

36

37

29

29

3636

33

15

16

52

53

54

5556545758

59

37

85778AA




TP 400-4201-00-RG-SMA



Footnotes

1 1960541 2 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/42 1716555 1 BRACKET, Upstop3 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/44 1960044 8 WASHER, 5/165 1720372 1 BRACKET, U6 1960074 1 CLIP, Spring7 1714529 1 ROD, Transport8 1710703 2 SPACER9 1923362 2 NUT, Hex Lock, 5/16-18

10 1717145 1 ARM, Rear11 1960655 1 CARRIAGE BOLT, 5/16-18 x 1-1/412 1721552 1 QUADRANT, 44"13 1720919 1 DECAL, Height14 1721635 1 BRACKET, Decal15 1924856 2 CAPSCREW, Hex Head, Taptite, 5/16-18 x 1/216 1931350 1 CARRIAGE BOLT, 3/8-16 x 117 960641 2 NUT, Hex Lock, Aluminum Insert, 3/818 1960594 1 CAPSCREW, Hex Head Taptite, 5/16-18 x 7/819 1704082 1 NUT, Adjuster20 1721634 1 ROD, Latch21 1919439 1 NUT, Hex Lock, ESNA, 3/8-1622 1724549 1 ARM ASSEMBLY, Rocker23 1665374 2 STRAP24 1714879 1 ECCENTRIC25 1924874 1 WASHER, 5/1626 1664847 6 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/427 960643 2 NUT, Hex Flange Collar Lock, 5/16-1828 1931352 1 CARRIAGE BOLT, 3/8-16 x 1-1/229 1709195 2 SPACER, 1-1/4 x 5/830 1960236 4 SPACER31 1921333 2 CAPSCREW, Hex Head, 5/16-18 x 132 1960373 4 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 133 1719907 1 SHAFT ASSEMBLY34 1960520 2 PUSHNUT, 5/835 1717675 2 ROLLER, End36 1924366 7 WASHER, 5/837 1668513 9 ROLLER38 1719846 1 BAR, Roller, Support39 1960288 2 PIN40 1960221 2 CLIP, Hair Pin41 1714760 3 WHEEL, Gauge42 1960027 2 WASHER, 1/243 158399 2 "E"-RING, 1/244 1714878 2 ARM ASSEMBLY, Adjustable




TP 400-4201-00-RG-SMA


Note: Apply Locktite380 in Hole prior toassembeling on rod

Insert MustFace Out

Insert MustFace Out

Lower holewith swing

away rollers

44

3840

1 2

34

58

4

9

6

7

1011

12

13 14

27

25

51

1

20

2122

18

26 4

23

24 25

27

17

27

19

28

32

30

31

34353638

3940

4142

43

44

1745

4647

45

4849

50

4545

304

34

3536

3636

37

36

37

29

29

3636

33

15

16

52

53

54

5556545758

59

37

85778AA




TP 400-4201-00-RG-SMA



Footnotes

45 1924940 4 WASHER, 3/846 1611705 1 SPACER47 1718019 1 ARM, Pitch48 1667812 1 SPACER49 1923701 1 CAPSCREW, Hex Head, 3/8-16 x 250 1921332 1 CAPSCREW, Hex Head, 5/16-18 x 3/451 1920397 1 NUT, Hex Lock ESNA, 1/4-2052 1720599 1 LATCH53 1921159 1 CAPSCREW, Hex Head, 1/4-20 x 2-1/454 1918265 2 WASHER, 5/1655 1723321 1 SPRING, Compression56 1960674 1 PUSH NUT57 1713995 1 GRIP, Lift Lever58 1723124 1 BUTTON59 1721620 1 HANDLE ASSEMBLY




TP 400-4201-00-RG-SMA


Torque nuts to 50-70 ft. lbs.

Apply gasketformer to thissurface if foamgasket (Ref. 10)is not used.

Torque screws to 45-55 ft. lbs.

Plug holesoutside foot restas required

Plug holesoutside foot restas required

1

22

3

4

5

6

7

8

9

10

11

12

13

14

14

15

16

17

18

19

20

21

23

24

1425

26

2728

2930

31

32 33

34

35 3231

27

25

3 37

22

36

39

38

42

41

40

85346AA




TP 400-4201-00-RG-SMA



Footnotes

1 1714419 3 NUT, Hex, Flange, 9/16-82 1713675 6 WASHER, Belleville3 1713161 2 PULLEY, RH Arbor & LH Arbor, 41/24 1713616 1 HUB, Adapter, LH5 1655729 3 COVER, Arbor Housing6 108202 3 BEARING, Upper7 1715724 3 SPACER, Sleeve, Upper Bearing8 1715723 3 SPACER, Arbor, Internal9 1705897 3 BEARING, Lower

10 1707335 3 GASKET, Foam11 1713338 3 ARBOR HOUSING ASSEMBLY (Includes Fitting Ref. No. 12)12 1704314 3 FITTING, Grease13 1720560 1 COVER, Arbor LH14 1664847 28 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/415 1713619 3 WASHER, Cup, 23/3216 1713612 1 SHAFT, Arbor LH17 1713196 3 SHIELD, Grass, Lower18 1704100 3 BLADE, Mower, 16-1/819 1713089 3 WASHER, Hex20 1656916 3 WASHER, Spring21 923471 3 CAPSCREW, Hex, Head, 7/16-14 x 1-1/422 1713609 1 SHAFT, Arbor (RH)23 41686816 1 HOUSING ASSEMBLY, Red23 1686816 1 HOUSING ASSEMBLY, Orange23 61686816 1 HOUSING ASSEMBLY, Black24 1715673 1 COVER, Arbor (RH)25 1931318 2 CARRIAGE BOLT, 1/4-20 x 7/826 1960518 2 NUT, Push27 1960353 2 WASHER, Plain, 1/428 1704873 1 CLAMP29 1919326 1 WASHER, Plain, 5/1630 1705080 1 SPRING, Deflector Retaining31 1916964 2 LOCKWASHER, 1/432 1916622 2 NUT, Hex, 1/4-2033 1706709 1 ROD, Deflector, Front34 1705115 1 * PLUG, Hole35 1705449 1 DEFLECTOR, Plastic36 1713613 1 HUB, Pulley, RH37 1718021 1 PULLEY, Arbor (Center)38 1713614 1 HUB, Pulley (Center)39 1713610 1 SHAFT, Arbor (Center)40 1924856 3 * CAPSCERW, Hex Head, Taptite, 5/16-18 x 1/241 1931277 3 * NUT, Hex Whiz Lock, 5/16-1842 1723323 1 CAP, Spring End

* Plug holes outside footrest as required




TP 400-4201-00-RG-SMA

Torque Specification ChartFOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

HardwareGrade

SAE Grade 2 SAE Grade 5 SAE Grade 8

Size Of in/lbs in/lbs in/lbsHardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 19 2.1 30 3.4 41 4.68-36 20 2.3 31 3.5 43 4.910-24 27 3.1 43 4.9 60 6.810-32 31 3.5 49 5.5 68 7.71/4-20 66 7.6 8 10.9 12 16.31/4-28 76 8.6 10 13.6 14 19.05/16-18 11 15.0 17 23.1 25 34.05/16-24 12 16.3 19 25.8 27 34.03/8-16 20 27.2 30 40.8 45 61.23/8-24 23 31.3 35 47.6 50 68.07/16-14 30 40.8 50 68.0 70 95.27/16-20 35 47.6 55 74.8 80 108.81/2-13 50 68.0 75 102.0 110 149.61/2-20 55 74.8 90 122.4 120 163.29/16-12 65 88.4 110 149.6 150 204.09/16-18 75 102.0 120 163.2 170 231.25/8-11 90 122.4 150 204.0 220 299.25/8-18 100 136 180 244.8 240 326.43/4-10 160 217.6 260 353.6 386 525.03/4-16 180 244.8 300 408.0 420 571.27/8-9 140 190.4 400 544.0 600 816.07/8-14 155 210.8 440 598.4 660 897.61-8 220 299.2 580 788.8 900 1,244.01-12 240 326.4 640 870.4 1,000 1,360.0

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

NOTES1. These torque values are to be used for all hardware

excluding: locknuts, self-tapping screws, thread formingscrews, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:a. for prevailing torque locknuts - use 65% of grade 5

torques.b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.3. Unless otherwise noted on assembly drawings, all torque

values must meet this specification.

Hardware Identification & Torque SpecificationsCommon Hardware Types

Screw, 1/2 x 2

BodyDiameter

BodyLength

InsideDiameter

Nut, 1/2”

NoMarks

3/8” Bolt or NutWrench—9/16”

3/8


5/16


1/4


1/2DIA.

7/16DIA.

7/16” Bolt or NutWrench (Bolt)—5/8”

Wrench (Nut)—11/16”

Wrench & Fastener Size Guide

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is theNominal size, meaning the inside diameter is 1/2 inch; if asecond number is present it represent the threads per inch

When bolt or capscrew is identified as 1/2 - 16 x 2”, thismeans the Nominal size, or body diameter is 1/2 inch; thesecond number represents the threads per inch (16 in thisexample, and the final number is the body length of thebolt or screw (in this example 2 inches long).

The guides and ruler furnished below are designed tohelp you select the appropriate hardware and tools.

01/4

3/41/2

11/4

3/41/2

21/4

3/41/2

31/4

3/41/2

4

500 N. Spring Street / PO Box 997Port Washington, WI 53074-0997 USA

www.simplicitymfg.com

MANUFACTURING, INC.© Copyright Simplicity Manufacturing, Inc.All Rights Reserved. Printed In USA.

2005

Documents

Regent / 500 / 2500 Series lawn Tractors & Mower Decksdl.owneriq.net/8/8e5ffd24-499a-416c-9d8d-86df1961b1ab.pdf · Parts Manual Rev. 03/2005 Regent / 500 / 2500 Series Lawn Tractors