View
215
Download
0
Tags:
Embed Size (px)
DESCRIPTION
vibration and structural isolation construction/industrial products
Citation preview
vibration and structural isolationconstruction/industrial products
Technical data for Regufoam®
• 150 • 220
• 300• 400
• 510• 680
2
Applications General M&E Plant ACU’s Refrigeration equipment Pumps Lift motors General workshop machineryGeneratorsBoilers PressesGuillotinesMilling machines
IndustrialInertia plinthsMachinery mounting pads/strips Foundation isolation Mass spring systemsPlant rooms
Structural engineeringIsolation of steel structures Structural bearings Resilient seatings Stairs and landings
Infrastructure Road construction Bridge constructionRail and tunnel construction
Construction Building isolationFoundation isolationStructural isolationFloating floors
Regufoam® 150
Regufoam® 220
Regufoam® 300
Regufoam® 400
Regufoam® 510
Regufoam® 680
Product range
3
Regufoam® is manufactured from polyurethanefoam and is primarily used for the isolation ofnoise and vibration in building structures andpermanent way systems. It is available in sixdifferent densities and colour coded for easeof identification. Designed to be flexible, thematerial provides a solution that canovercome the full range of anti-vibrationchallenges in the construction industry.
Regufoam® offers very high levels ofvibration isolation and noise attenuation andhas been specifically designed to isolatestructures from ground borne noise andvibration. It also has excellent resilience withminimal creep characteristics. All Regufoam®
products have been independently tested atthe University of Dresden.
Regufoam® can also be used in the followingindustries:
• Mechanical engineering
• Heating and ventilation
• Industrial
• Road, rail and tunnel construction
• Shipbuilding
• Automotive
Load Ranges
150 220 300 400 510 680
Regufoam®
0.400
0.200
0.100
0.050
0.025
0.010
0.000
Load range (N/mm
2 )
Construction / IndustrialNoise and vibration isolation
Regufoam® grades
4
1 Load Deflection
Load range (N/mm
2 )
Deflection (mm)Samples: 300mm x 300mm, 3rd load cycle, between flat platesLoad rate: 0.02 MPa/min, ambient temperature* When calculating specifics, please do not base calculations using the dynamic load range.
0.0200
0.0175
0.0150
0.0125
0.0100
0.0075
0.0050
0.0025
0.0000
12mm
50mm
25mm
0 1 2 3 4 5 6 7 8 9 10 11 12
Regufoam® 150
Load Ranges
150 220 300 400 510 680
Regufoam® 1500.400
0.200
0.100
0.050
0.025
0.010
0.000
Load range (N/mm
2 )
Regufoam® grades
37mm
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Dynamic load
range*
Static load range
5
The diagram refers to a structure consisting of a rigid base and an elastic layer of Regufoam® 150.
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency (Hz)
Disturbing frequency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
Regufoam® 150Load range (N/mm
2 )
0.0200
0.0175
0.0150
0.0125
0.0100
0.0075
0.0050
0.0025
0.0000
50mm25mm
12mm
Natural frequency (Hz)
3 Natural Frequency
Regufoam® 150
Parameter: Power transmission loss (dB), isolation factor in %
Dynamic load
range
Static load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
37mm
6
Specific load (N/mm2)
Elastic modulus (N/mm
2 )
40 Hz
5 Hz
static
Static modulus of elasticity: Tangential modulus from the deflection curvesDynamic modulus: samples 300mm x 300mm x 25mmSinusoidal excitation, amplitude +/- 0.25mm
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.000.000 0.005 0.010 0.015 0.020
4 Modulus of Elasticity
Regufoam® 150
5 Dynamic Stiffness
Dynamic stiffness (N/mm
3 )
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0.000
14
12
10
8
6
4
2
0
Permanent load (N/mm2)
40 Hz
5 Hz
static
Samples: 300mm x 300mm x 25mmDIN 53513
0.000 0.005 0.010 0.015 0.020
Dynamic stiffness (MN/m
3 )
Regufoam® 150
10 Hz
10 Hz
Static load range Dynamic load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
7
Technical InformationDensity DIN 53420 ca. 150 Kg/m3
Beddings module DIN 18134 0.0038 N/mm3 Measured at a maximum continuous load of 0.01 N/mm2 and a material thickness of 25mm.
Compression Set DIN 53572 2.50 % Measured 30 minutes after decompressionwith 50% deformation/23ºC after 70 hrs.
Tensile Strength DIN 53571 0.42 N/mm2 Minimum
Elongation at break DIN 53571 270 % Minimum
Tear-Resistance DIN 53515 2.65 N/mm Minimum
Mechanical Loss Factor DIN 53513 0.25 – –
Static Modulus Similar to 0.025-0.16 N/mm2 Tangential modulus see fig. 4of Elasticity EN 826
Dynamic Modulus DIN 53513 0.11-0.32 N/mm2 Depending on load and frequency, see fig. 4of Elasticity
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Relative deflection (% of thickness)
Loading time (hrs)
0.01 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
Regufoam® 15050
40
30
20
10
0
Technical DataPermanent static load range: 0 to 0.010 N/mm2
Permanent and variable loads/operating load ranges: 0 to 0.015 N/mm2
Rare and short-term loads/load parts: up to 0.50 N/mm2
Physical PropertiesRoll dimensions*: 5m x 1.5m Standard thickness: 12mm & 25mm Material basis: Cellular Polyurethane (PUR)Mixed cell structureColour: beige
* Also available in bespoke dimensions and as moulded items
8
1 Load Deflection
Load range (N/mm
2 )
Deflection (mm)
Samples: 300mm x 300mm, 3rd load cycle, between flat platesLoad rate: 0.05 MPa/min, ambient temperature* When calculating specifics, please do not base calculations using the dynamic load range.
0.050
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0.000
25mm12mm
37mm
50mm
Regufoam® 220
0 1 2 3 4 5 6 7 8 9 10 11 12
Load Ranges
150 220 300 400 510 680
Regufoam® 2200.400
0.200
0.100
0.050
0.025
0.010
0.000
Load range (N/mm
2 )
Regufoam® grades
Dynamic
load range*
Static load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
9
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing frequency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Load range (N/mm
2 )
0.050
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0.000
37mm
50mm25mm
12mm
Natural frequency (Hz)
The diagram refers to a structure consisting of a rigid base and an elastic layer of Regufoam® 220.
3 Natural Frequency
Regufoam® 220
2 Vibration Isolation
Regufoam® 220
Dynamic
load range
Static load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
10
Specific load (N/mm2)
Elastic modulus (N/mm
2 )
40 Hz
10 Hz
5 Hz
static
Static modulus of elasticity: Tangential modulus from the deflection curvesDynamic modulus: samples 300mm x 300mm x 25mmSinusoidal excitation, amplitude +/- 0.25mm
1.00
0.75
0.50
0.25
0.000.00 0.01 0.02 0.03 0.04 0.05
4 Modulus of Elasticity
Regufoam® 220
5 Dynamic Stiffness
Dynamic stiffness (N/mm
3 )
0.030
0.025
0.020
0.015
0.010
0.005
0.000
30
25
20
15
10
5
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 25mmDIN 53513
0.000 0.010 0.020 0.030 0.040 0.050
Dynamic stiffness (MN/m
3 )
Regufoam® 220
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamicload range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
11
Relative deflection (% of thickness)
Loading time (hrs)
0.025 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
Regufoam® 22050
40
30
20
10
0
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical InformationDensity DIN 53420 ca. 220 Kg/m3
Beddings module DIN 18134 0.011 N/mm3 Measured at a maximum continuous load of 0.0025 N/mm2 and a material thickness of 25mm.
Compression Set DIN 53572 <4.0 % Measured 30 minutes after decompression with 50% deformation/23ºC after 70 hrs.
Tensile Strength DIN 53571 0.56 N/mm2 Minimum
Elongation at break DIN 53571 260 % Minimum
Tear-Resistance DIN 53515 3.38 N/mm Minimum
Mechanical Loss Factor DIN 53513 0.20 – –
Static Modulus Similar to 0.05-0.38 N/mm2 Tangential modulus see fig. 4of Elasticity EN 826
Dynamic Modulus DIN 53513 0.30-0.69 N/mm2 Depending on load and frequency, see fig. 4of Elasticity
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical DataPermanent static load range: 0 to 0.025 N/mm2
Permanent and variable loads/operating load ranges: 0 to 0.035 N/mm2
Rare and short-term loads/load parts: up to 1.0 N/mm2
Physical PropertiesRoll dimensions*: 5m x 1.5m Standard thickness: 12mm & 25mm Material basis: Cellular Polyurethane (PUR)Mixed cell structureColour: purple
* Also available in bespoke dimensions and as moulded items
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
12
1 Load Deflection
Load range (N/mm
2 )
Samples: 300mm x 300mm, 3rd load cycle, between flat platesLoad rate: 0.1 MPa/min, ambient temperature* When calculating specifics, please do not base calculations using the dynamic load range.
Deflection (mm)
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
50mm
37mm
Regufoam® 300
0 1 2 3 4 5 6 7 8 9 10 11 12
Load Ranges
150 220 300 400 510 680
Regufoam® 3000.400
0.200
0.100
0.050
0.025
0.010
0.000
Load range (N/mm
2 )
Regufoam® grades
25mm12mm
Dynamic
load range*
Static load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
13
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing frequency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
Regufoam® 300Load range (N/mm
2 )
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
25mm12mm
Natural frequency (Hz)
The diagram refers to a structure consisting of a rigid base and an elastic layer of Regufoam® 300.
3 Natural Frequency
Regufoam® 300
Dynamic load range
Static load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
50mm
37mm
14
Specific load (N/mm2)
Elastic modulus (N/mm
2 )
40 Hz
10 Hz
5 Hz
static
Static modulus of elasticity: Tangential modulus from the deflection curvesDynamic modulus: samples 300mm x 300mm x 25mmSinusoidal excitation, amplitude +/- 0.25mm
1.5
1.0
0.5
0.00.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
4 Modulus of Elasticity
Regufoam® 300
5 Dynamic Stiffness
Dynamic stiffness (N/mm
3 )
0.06
0.05
0.04
0.03
0.02
0.01
0.00
60
50
40
30
20
10
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 25mmDIN 53513
0.00 0.02 0.04 0.05 0.06 0.08 0.10
Dynamic stiffness (MN/m
3 )
Regufoam® 300
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
15
Relative deflection (% of thickness)
Loading time (hrs)
0.05 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep TestRegufoam® 300
50
40
30
20
10
0
Technical InformationDensity DIN 53420 ca. 300 Kg/m3
Beddings module DIN 18134 0.025 N/mm3 Measured at a maximum continuous load of 0.05 N/mm2 and a material thickness of 25mm.
Compression Set DIN 53572 2.20 % Measured 30 minutes after decompressionwith 50% deformation/23ºC after 70 hrs
Tensile Strength DIN 53571 0.78 N/mm2 Minimum
Elongation at break DIN 53571 240 % Minimum
Tear-Resistance DIN 53515 4.85 N/mm Minimum
Mechanical Loss Factor DIN 53513 0.14 – –
Static Modulus Similar to 0.14-0.75 N/mm2 Tangential modulus see fig. 4of Elasticity EN 826
Dynamic Modulus DIN 53513 0.60-1.30 N/mm2 Depending on load and frequency, see fig. 4of Elasticity
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical DataPermanent static load range: 0 to 0.05 N/mm2
Permanent and variable loads/operating load ranges: 0 to 0.08 N/mm2
Rare and short-term loads/load parts: up to 2 N/mm2
Physical PropertiesRoll dimensions*: 5m x 1.5m Standard thickness: 12mm & 25mm Material basis: Cellular Polyurethane (PUR)Mixed cell structureColour: turquoise
* Also available in bespoke dimensions and as moulded items
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
16
1 Load Deflection
Load range (N/mm
2 )
Deflection (mm)
Samples: 300mm x 300mm, 3rd load cycle, between flat platesLoad rate: 0.2 MPa/min, ambient temperature* When calculating specifics, please do not base calculations using the dynamic load range.
0.200
0.175
0.150
0.125
0.100
0.075
0.050
0.025
0.000
12mm 25mm
37mm
50mm
0 1 2 3 4 5 6 7 8 9 10 11 12
Regufoam® 400
Load Ranges
150 220 300 400 510 680
Regufoam® 4000.400
0.200
0.100
0.050
0.025
0.010
0.000
Load range (N/mm
2 )
Regufoam® grades
Dynamic
load range*
Static load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
17
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing frequency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
Regufoam® 400Load range (N/mm
2 )
0.200
0.175
0.150
0.125
0.100
0.075
0.050
0.025
0.000
50mm
12mm
25mm
37mm
Natural frequency (Hz)
The diagram refers to a structure consisting of a rigid base and an elastic layer of Regufoam® 400.
3 Natural Frequency
Regufoam® 400
Dynamic load
range
Static load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
18
Specific load (N/mm2)
Elastic modulus (N/mm
2 )
40 Hz
5 Hz
static
Static modulus of elasticity: Tangential modulus from the deflection curvesDynamic modulus: samples 250mm x 250mm x 25mmSinusoidal excitation, amplitude +/- 0.25mm
3.0
2.5
2.0
1.5
1.0
0.5
0.00.00 0.05 0.10 0.15 0.20
4 Modulus of Elasticity
Regufoam® 400
5 Dynamic Stiffness
Dynamic stiffness (N/mm
3 )
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
200
180
160
140
120
100
80
60
40
20
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 25mmDIN 53513
0.00 0.05 0.10 0.15 0.20
Regufoam® 400
Dynamic stiffness (MN/m
3 )
10 Hz
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
19
Relative deflection (% of thickness)
Loading time (hrs)
0.1 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
Regufoam® 4006
5
4
3
2
1
0
Technical InformationDensity DIN 53420 ca. 400 Kg/m3
Beddings module DIN 18134 0.037 N/mm3 Measured at a maximum continuous load of 0.10 N/mm2 and a material thickness of 25mm.
Compression Set DIN 53572 2.40 % Measured 30 minutes after decompressionwith 50% deformation/23ºC after 70 hrs.
Tensile Strength DIN 53571 1.30 N/mm2 Minimum
Elongation at break DIN 53571 290 % Minimum
Tear-Resistance DIN 53515 7.38 N/mm Minimum
Mechanical Loss Factor DIN 53513 0.10 – –
Static Modulus Similar to 0.39-1.27 N/mm2 Tangential modulus see fig. 4of Elasticity EN 826
Dynamic Modulus DIN 53513 1.07-1.80 N/mm2 Depending on load and frequency, see fig. 4of Elasticity
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical DataPermanent static load range: 0 to 0.10 N/mm2
Permanent and variable loads/operating load ranges: 0 to 0.15 N/mm2
Rare and short-term loads/load parts: up to 3.0 N/mm2
Physical PropertiesRoll dimensions*: 5m x 1.5m Standard thickness: 12mm & 25mm Material basis: Cellular Polyurethane (PUR)Mixed cell structureColour: brick-red
* Also available in bespoke dimensions and as moulded items
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
20
Load range (N/mm
2 )
Deflection (mm)Samples: 300mm x 300mm, 3rd load cycle, between flat platesLoad rate: 0.5 MPa/min, ambient temperature* When calculating specifics, please do not base calculations using the dynamic load range.
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.000 1 2 3 4 5 6 7 8 9 10 11 12
12mm 25mm
37mm
50mm
Load Ranges
150 220 300 400 510 680
Regufoam® 5100.400
0.200
0.100
0.050
0.025
0.010
0.000
Load range (N/mm
2 )
Regufoam® grades
1 Load DeflectionRegufoam® 510
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Dynamic
load range*
Static load range
21
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing frequency (Hz)
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Load range (N/mm
2 )
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
12mm
25mm
50mm
37mm
Natural frequency (Hz)
The diagram refers to a structure consisting of a rigid base and an elastic layer of Regufoam® 510.
3 Natural Frequency
Regufoam® 510
2 Vibration Isolation
Regufoam® 510
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Dynamic
load range
Static load range
22
Specific load (N/mm2)
Elastic modulus (N/mm
2 )40 Hz
10 Hz
5 Hz
static
Static modulus of elasticity: Tangential modulus from the deflection curvesDynamic modulus: samples 300mm x 300mm x 25mmSinusoidal excitation, amplitude +/- 0.25mm
5
4
3
2
1
00.00 0.1 0.2 0.3 0.4 0.5
4 Modulus of Elasticity
Regufoam® 510
5 Dynamic Stiffness
Dynamic stiffness (N/mm
3 )
0.22
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
220
200
180
160
140
120
100
80
60
40
20
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 25mmDIN 53513
0.00 0.10 0.20 0.30 0.40 0.50
Dynamic stiffness (MN/m
3 )
Regufoam® 510
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
23
Relative deflection (% of thickness)
Loading time (hrs)
0.2 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
Regufoam® 51050
40
30
20
10
0
Technical InformationDensity DIN 53420 ca. 510 Kg/m3
Beddings module DIN 18134 0.072 N/mm3 Measured at a maximum continuous load of 0.20 N/mm2 and a material thickness of 25mm.
Compression Set DIN 53572 2.80 % Measured 30 minutes after decompressionwith 50% deformation/23ºC after 70 hrs.
Tensile Strength DIN 53571 1.50 N/mm2 Minimum
Elongation at break DIN 53571 260 % Minimum
Tear-Resistance DIN 53515 8.28 N/mm Minimum
Mechanical Loss Factor DIN 53513 0.10 – –
Static Modulus Similar to 1.49-2.25 N/mm2 Tangential modulus see fig. 4of Elasticity EN 826
Dynamic Modulus DIN 53513 2.63-3.35 N/mm2 Depending on load and frequency, see fig. 4of Elasticity
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical DataPermanent static load range: 0 to 0.2 N/mm2
Permanent and variable loads/operating load ranges: 0 to 0.3 N/mm2
Rare and short-term loads/load parts: up to 4.0 N/mm2
Physical PropertiesRoll dimensions*: 5m x 1.5m Standard thickness: 12mm & 25mm Material basis: Cellular Polyurethane (PUR)Mixed cell structureColour: orange
* Also available in bespoke dimensions and as moulded items
24
Load range (N/mm
2 )
Deflection (mm)Samples: 250mm x 250mm, 3rd load cycle, between flat platesLoad rate: 0.8 MPa/min, ambient temperature* When calculating specifics, please do not base calculations using the dynamic load range.
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.00 1 2 3 4 5 6 7 8 9 10 11 12
12mm 25mm
37mm
50mm
1 Load DeflectionRegufoam® 680
Load Ranges
150 220 300 400 510 680
Regufoam® 6800.400
0.200
0.100
0.050
0.025
0.010
0.000
Load range (N/mm
2 )
Regufoam® grades
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Dynamic
load range*
Static load range
25
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing frequency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
Regufoam® 680Load range (N/mm
2 )
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
The diagram refers to a structure consisting of a rigid base and an elastic layer of Regufoam® 680.
3 Natural Frequency
Regufoam® 680
12mm
25mm
37mm
50mm
Natural frequency (Hz)
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Dynamic
load range
Static load range
26
Specific load (N/mm2)
Elastic modulus (N/mm
2 )40 Hz
5 Hz
static
Static modulus of elasticity: Tangential modulus from the deflection curvesDynamic modulus: samples 250mm x 250mm x 25mmSinusoidal excitation, amplitude +/- 0.25mm
9
8
7
6
5
4
3
2
1
00.0 0.2 0.4 0.6 0.8
4 Modulus of Elasticity
Regufoam® 680
10 Hz
5 Dynamic Stiffness
Dynamic stiffness (N/mm
3 )
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
400
350
300
250
200
150
100
50
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 250mm x 250mm x 25mmDIN 53513
0.00 0.20 0.40 0.60 0.80
Dynamic stiffness (MN/m
3 )
Regufoam® 680
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
Tested by the University of Dresden, Institute for Structural Dynamics, test certificate no. 32/02, April 2002
Static load range Dynamic load range
27
Relative deflection (% of thickness)
Loading time (hrs)
0.4 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
Regufoam® 68050
40
30
20
10
0
Technical InformationDensity DIN 53420 ca. 680 Kg/m3
Beddings module DIN 18134 0.327 N/mm3 Measured at a maximum continuous load of 0.40 N/mm2 and a material thickness of 25mm.
Compression Set DIN 53572 2.90 % Measured 30 minutes after decompressionwith 50% deformation/23ºC after 70 hrs.
Tensile Strength DIN 53571 2.47 N/mm2 Minimum
Elongation at break DIN 53571 310 % Minimum
Tear-Resistance DIN 53515 14.4 N/mm Minimum
Mechanical Loss Factor DIN 53513 0.08 – –
Static Modulus Similar to 3.0-3.9 N/mm2 Tangential modulus see fig. 4of Elasticity EN 826
Dynamic Modulus DIN 53513 4.80-5.60 N/mm2 Depending on load and frequency, see fig. 4of Elasticity
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical DataPermanent static load range: 0 to 0.4 N/mm2
Permanent and variable loads/operating load ranges: 0 to 0.6 N/mm2
Rare and short-term loads/load parts: up to 5.0 N/mm2
Physical PropertiesRoll dimensions*: 5m x 1.5m Standard thickness: 12mm & 25mm Material basis: Cellular Polyurethane (PUR)Mixed cell structureColour: brown
* Also available in bespoke dimensions and as moulded items
Construction Building isolation Foundation isolation Structural isolationResilient seatingsFloating floorsStairs and landings
Industrial Inertia plinthsMachinery mounting pads/stripsMachine foundationsMass spring systems Plant roomsGeneral workshop machinery
General M&E plant ACU’s Refrigeration equipment Pumps Lift motors GeneratorsBoilersPressesGuillotinesMilling machines
InfrastructureRail and tunnel construction Road and bridge construction
Also in the RAME anti-vibration portfolio:Regupol®
Regupol Acoustics Middle East (RAME) is the Middle East arm of market-leadingRegupol® manufacturer, BSW. Providing exclusive access to the full range of Regupol®
and Regufoam® high performance anti-vibration systems, RAME is setting the standard forvibration control in the Middle East.
From specification through to project completion, RAME has a fully trained technical team ableto provide free advice and on-site support as well as guidance during installation. This combined
product and service offering has led to Regupol® being used on a number of high profile projects,including Dubai Healthcare City and the Marina Hotel, Abu Dhabi. For further information and advice,
please contact the RAME technical sales team.
Regupol® products are high performing yet cost effective anti-vibration materials. With ahigh load bearing capacity and excellent damping properties, Regupol® maintains itsperformance over a long lifespan. Manufactured from polyurethane bound rubbergranulate, all Regupol® materials are fully recyclable.
A wide choice of Regupol® grades are available, which includes products with a loadbearing range up to and including 1.5N/mm2. The selection of Regupol® materials willdepend on a number of factors, including load, area and natural frequency. Supplied ineasy to lay rolls or individually cut pads/strips, Regupol® is quick and easy to install.
Regupol Acoustics Middle East FZEP.O. Box 125279, Dubai, UAE
Phone: +971-4-3233493Fax: +971-4-3406295
[email protected] and BSW product portfolio certified by DIN EN ISO 9001 DIN EN ISO 14001 OHSAS 18001
Regupol® and Regufoam® are official trademarks of BSW
www.regupolacousticsmiddleeast.com