Upload
topogigio240
View
120
Download
3
Embed Size (px)
DESCRIPTION
experiments
Citation preview
R E L AY
SELECTION
G U I D E
A m e r i c a n Z e t t l e r , I n c .
R e v i s e d
7 / 2 4 / 0 6
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXIMATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
At rated load unless otherwisespecified
SERIES
2
High Switching Capacity AC and DC coils Three different mountingoptions
Push To Test lever availableon some models
CE marked
Yes
14 Form C
3PDT, 4PDT:5 A at 30 VDC/250 VACDPDT Standard Duty:
7 A at 30 VDC/250 VACDPDT Heavy Duty:
10 A at 30 VDC/ 250 VACSPDT Heavy Duty:
15 A at 30 VDC/250 VAC
5 thru 110 VDC6 thru 240 VAC
DC:6 to 48 VDC: 576 mW
110 VDC: 704 mWAC:
0.768 VA
Contact to coil:1500 Vrms
Between open contacts:1000 Vrms
Contact Set to Contact Set:1000 Vrms
1 x 105 operations
2 x 107 operations
1.10 x 0.85 x 1.38
THT
XX
X
UL/CUR
Relay Selection Guide
0.61
0.43
0.400.84
0.64
0.581.23
0.940.74
High sensitivity Subminiature size Low cost Meets FCC Part 68.302 and 68.304
Yes
1 Form C
Light duty:1 A at 30 VDC
0.5 A at 120 VACHeavy duty:
2 A at 30 VDC1 A at 120 VAC
5 thru 24 VDC
Standard coils:220 mW
Sensitive coils:100 mW
Contact to coil:1250 Vrms
Between open contacts:500 Vrms
Standard duty:5 x 105 at 1 A at 30 VDC or 4 x 105 at 0.5 A at 120 VAC
Heavy duty:2 x 105 at 2 A at 30 VDC or 2 x 105 at 1 A at 120 VAC
1 x 107 operations
0.61 x 0.40 x 0.43
THT
UL/CSA
AZ5
Versatile contact configurations
Wide switching range High sensitivity Long life
Yes
16 Form C
2 A at 26 VDCor 115 VAC
3 A at 28 VDCor 115 VAC
7.5 A at 28 VDCor 115 VAC
5 A at 30 VDCor 120 VAC
3 thru 115 VDC
Standard coils:450 to 850 mWSensitive coils:40 mW per pole
(25 mW per pole available)
Contact to coil:1500 Vrms
Between open contacts:1000 Vrms
Contact Set to Contact Set:1000 Vrms
1 x 108 at 10 mA at 6 VDC1.5 x 106 at 2 A at 28 VDC or
115 VAC2 x 105 at 5 A at 28 VDC or
115 VAC1 x 105 at 7.5 A at 28 VDC or
115 VAC5 x 108 operations
2 pole: 0.94 x 0.74 x 1.234 pole: 1.17 x 0.74 x 1.236 pole: 1.40 x 0.74 x 1.23
THTX
X
UL/CUR
AZ420
High sensitivity (110 mW) Class B (130C) insulationstandard
Class F (155C) insulationavailable
VDE versions available Hermetically sealed versionsavailable
Yes
1 Form A, C
Light duty: 2 A at 28 VDC or 300 VACMedium duty: 6 A at 28 VDC or 300 VACHeavy duty: 10 A at 24 VDC or 250 VAC
5 thru 48 VDC
Standard coils:210 mW
Sensitive coils:140 mW
(110 mW available)
Contact to coil:3000 Vrms
Hermetically sealed:1600 Vrms
Between open contacts:750 VrmsLight Duty:
3 x 105 at 3 A at 120 VACMedium Duty:
1.8 x 105 at 6 A at 120 VACHeavy Duty:
1 x 105 at 10 A at 120 VAC
1 x 108 operations
0.84 x 0.64 x 0.58
THT
UL/CUR/VDE
AZ8
1.10
1.38
0.85
AZ164AZ166
3Relay Selection Guide
1.14 0.51
1.0
High dielectric strength, 5000 Vrms
High switching capacity Class B (130C) insulationstandard
Isolation spacing greaterthan 8 mm
Yes
1 Form A, C
TV5 at 120 VAC10A at 277 VAC or 30 VDC resistive
1/3 HP at 250 VAC1/4 HP at 125 VAC NO
3 thru 110 VDC
257 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 10 A at 240 VAC
1 x 107 operations
1.14 x 0.51 x 1.0
THT
X
UL/CUR/TV
AZ697AZ673
High dielectric strength, 4000 Vrms
Withstands surges up to10,000 volts
High switching capacity inslim package
Yes
1 Form A, C
10 A at 250 VAC10 A at 30 VDC
1/8 HP at 125 VAC1/4 HP at 250 VACTV-5 at 125 VAC
5 thru 48 VDC
Standard coils:300 mW
Sensitive coils:140 mW
Contact to coil:4000 Vrms
Between open contacts:1000 Vrms
Surge contact to coil:10,000 V
1 x 105 at 10 A at 240 VAC
1 x 107 operations
0.97 x 0.41 x 0.99
THT
UL/CUR/TV
0.99
0.970.41 0.51
1.02
1.14
High switching capacity High dielectric strength, 5000 Vrms
Isolation spacing greater than 8 mm
Class B (130C) insulation standard
Yes
2 Form A, C
10 A at 30 VDC or 250 VAC
TV-3 at 125 VAC1/4 HP at 240 VAC1/8 HP at 120 VAC
3 thru 110 VDC
257 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:3000 Vrms
1 x 105 at 10 A at 240 VAC
1 x 107 operations
1.14 x 0.51 x 1.02
THT
X
UL/CUR/TV
AZ733
0.51
1.02
1.14
1.5 mm contact gap High switching capacity High dielectric strength, 5000 Vrms
Isolation spacing greaterthan 8 mm
Class B (130C) insulation standard
Yes
2 Form A
10 A at 250 VAC10 A at 30 VDCTV-3 at 125 VAC
3 thru 60 VDC
450 mW
Contact to coil:5000 Vrms
Between open contacts:3000 Vrms
Contact set to contact set:3000 Vrms
1 x 105 at 10 A at 240 VAC
5 x 105 operations
1.14 x 0.51 x 1.02
THT
X
UL/CUR/TV
AZ733W
0.470.95
0.98
Dielectric strength, 4000 Vrms
5 Amp switching, doublepole contacts
Class B (130C) insulation standard
Yes
2 Form A
5 A at 250 VAC5 A at 30 VDC
TV-3 at 125 VAC
5 thru 48 VDC
300 mW
Contact to coil:4000 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:1000 Vrms
1 x 105 at 5 A at 240 VAC
1 x 107 operations
0.95 x 0.47 x 0.98
THT
UL/CUR
AZ734
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXIMATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
4
0.50
0.62
1.14
High dielectric strength, 5000 Vrms
AC and DC coils Isolation spacing greaterthan 10 mm
Class B (130C) insulation standard
Class F (155C) available
Yes
2 Form A, B, C
10 A at 250 VAC8 A at 277 VAC
1/2 HP at 250 VAC1/4 HP at 125 VAC
5 thru 110 VDC24 thru 230 VAC
190 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:3000 Vrms
1 x 105 at 8 A at 240 VAC
1 x 107 operations
1.14 x 0.50 x 0.62
THT
X
UL/CUR/VDE
AZ743
1.140.50
0.95
High dielectric strength, 5000 Vrms
Isolation spacing greaterthan 8 mm
Class B (130C) insulation standard
Class F (155C) available
No
1 Form A
16 A at 250 VAC20 A at 125 VAC16 A at 30 VDC
5 thru 48 VDC
340 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 16 A at 240 VAC
1 x 107 operations
1.14 x 0.50 x 0.95
THTQuick connect
UL/CUR/TV
0.50
0.62
1.14
High dielectric strength, 5000 Vrms
AC and DC coils Isolation spacing greaterthan 10 mm
Proof tracking index(PTI/CTI) 250
Surpasses requirements ofVDE 0631/0700
Yes
2 Form A, C
8 A at 250 VAC
3 thru 110 VDC12 thru 240 VAC
DC coil: 200 mWAC coil: 0.422 VA
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:2500 Vrms
1 x 105 at 8 A at 240 VAC
3 x 107 operations
1.14 x 0.50 x 0.62
THT
X
UL/CUR/VDE
AZ742 AZ756
0.511.14
1.06
High switching capacity High dielectric strength, 5000 Vrms
Isolation greater than 8 mm Class B (130C) insulation standard
Class F (155C) available
Yes
1 Form A, B, C
20 A at 277 VAC (N.O.)16 A at 240 VAC12 A at 277 VAC1 HP at 240 VACTV8 at 120 VAC20 A at 24 VDC
3 thru 110 VDC
270 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
5 x 104 at 16 A at 240 VAC2 x 104 at 20 A at 277 VAC
5 x 106 operations
1.14 x 0.51 x 1.06
THT
X
UL/CUR/TV
AZ755
5Relay Selection Guide
0.910.49
0.98
20 Amp switching 10 kV surge Class F (155C) insulationstandard
UL, CUR file E44211
Yes
1 Form A
20 A at 250 VAC16 A at 30 VDC
1.5 HP at 250 VAC
5 thru 24 VDC
245 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 20 A at 250 VAC
1 x 107 operations
0.91 x 0.49 x 0.98
THTQuick connect
UL/CUR
0.73 1.22
1.20
20 Amp switching High in-rush capacity Quick-connects for contacts Class B (130C) insulation standard
No
1 Form A
20 A at 220 VAC1.5 HP at 250 VAC
6 thru 48 VDC
441 mW
Contact to coil:2000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 20 A at 220 VAC
1 x 107 operations
1.22 x 0.73 x 1.20
THTQuick connect
UL/CUR
AZ760
1.140.50
0.62
High dielectric strength, 5000 Vrms
AC and DC coils Isolation spacing greaterthan 10 mm
Class B (130C) insulation standard
Class F (155C) available
Yes
1 Form A, B, C
Standard12 A at 277 VAC
Sensitive10 A at 250 VAC
1/2 HP at 250 VAC1/3 HP at 125 VACB300 Pilot DutyR300 Pilot Duty
5 thru 110 VDC24 thru 230 VAC
Standard: 196 mWSensitive: 141 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 12 A at 240 VAC
1 x 107 operations
1.14 x 0.50 x 0.62
THT
X
UL/CUR/VDE
AZ761AZ757
0.52 1.16
0.64
High dielectric strength, 5000 Vrms
AC and DC coils Isolation spacing greaterthan 10 mm
Class B (130C) insulation standard
Class F (155C) available
Yes
1 Form A, B ,C
16 A at 277 VAC1 HP at 250 VAC
1/2 HP at 125 VACTV-5 at 125 VAC
(1 Form A)B300 Pilot DutyR300 Pilot Duty
5 thru 110 VDC24 thru 230 VAC
196 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 16 A at 240 VAC
1 x 107 operations
1.16 x 0.52 x 0.64
THT
X
UL/CUR/VDE
AZ762
NEW
AZ762F
0.63
1.240.59
High temperature operation125C
Dielectric strength 5000Vrms
Class F (155C) standard 20 Amp switching Low profile Quick connects(0.618)
Yes
1 Form A, B
20 A at 277 VAC18 A at 250 VAC16 A at 250 VAC12 A at 400 VAC
5 thru 60 VDC
196mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 20 A at 277 VAC
1 x 107 operations
1.24 x 0.59 x 0.63
THT
UL/CUR/VDE
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXIMATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
6
0.400.72
0.59
Small footprint Low cost 10 Amp switching capacity
Yes
1 Form A, C
10 A at 120 VAC10 A at 28 VDC
3 thru 24 VDC
253 mW
Contact to coil:2500 Vrms
Between open contacts:1000 Vrms
1 x 105 at 10 A at 120 VAC
1 x 107 operations
0.72 x 0.40 x 0.59
THT
UL/CUR
AZ765
0.50
0.62
1.14
High dielectric strength, 5000 Vrms
AC and DC coils Isolation spacing greaterthan 10 mm
Proof tracking index(PTI/CTI) 250
Surpasses requirements ofVDE 0631/0700
Yes
1 Form A, C
16 A at 250 VAC
DC coils: 3 thru 110 VDCAC coils: 12 thru 240 VAC
DC coils: 200 mWAC coils: 0.422 VA
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 16 A at 240 VAC
3 x 107 operations
1.14 x 0.50 x 0.62
THT
X
UL/CUR/VDE
AZ764
0.720.41 0.60
Low seated height Low cost Class B (130C) insulation standard
13.5 Amp switching capacity
Yes
1 Form A
13.5 A at 125 VAC10 A at 30 VDC or
277 VAC12 A at 125 VACTV5 at 120 VAC
1/4 HP at 125 / 250 VAC
3 thru 24 VDC
253 mW
Contact to coil:2500 Vrms
Between open contacts:1000 Vrms
1 x 105 at 12 A at 125 VAC
1 x 107 operations
0.72 x 0.60 x 0.41
THT
UL/CUR
AZ766
0.501.14
0.62
High dielectric strength,5000 Vrms
AC and DC coils Isolation spacing greaterthan 10 mm
Proof tracking index(PTI/CTI) 250
Surpasses requirements ofVDE 0631/0700
Yes
1 Form A, C
12 A at 250 VAC
DC coils: 3 thru 110 VDCAC coils: 12 thru 240 VAC
DC coils: 200 mWAC coils: 0.422 VA
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 12 A at 240 VAC
3 x 107 operations
1.14 x 0.50 x 0.62
THT
X
UL/CUR/VDE
AZ763
25 Amp switching 80 Amp inrush currentQuick connect and PCBterminals
Flux tight construction Class B (130C) insulation standard
10 kV surge
No
1 Form A
25 A at 277 VAC1 HP at 120 VAC2 HP at 240 VAC
5 thru 48 VDC
441 mW
Contact to coil:4500 Vrms
Between open contacts:1500 Vrms
Contact to coil surge:10,000 V
1 x 105 at 25 A at 277 VAC
2 x 106 operations
QC: 1.20 x 0.63 x 0.93PCB: 1.20 x 0.63 x 1.04
THT
Quick connect
UL/CUR/TV
0.93
1.201.20
0.63
1.04
AZ769
7
Relay Selection Guide
Small footprint 5 kV dielectric strength,10 kV surge
Class B (130C) insulation standard
8 mm creepage and clearance
Yes
1 Form A, C
1 Form A (N.O.):5 A at 250 VAC
5 A 30 VDC1/8 HP, 125 / 250 VAC
3 A at 250 VAC, 0.4 PF
1 Form C:3 A at 250 VAC3 A at 30 VDC
3 thru 48 VDC
Standard: 253 mWSensitive: 113 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 5 A at 240 VAC
1 x 106 operations
0.70 x 0.41 x 0.49
THT
UL/CUR/VDE
0.70
0.49
0.41
AZ770 AZ830-4P/AZ830P-4P 4 Pole single side stable and two coil bistable (latching version)
Meets FCC Part 68.302 &68.304
Bifurcated contacts Low profile DIP package High sensitivity (100 MW)
Yes
4 Form C
1 A at 30 VDC0.5 A at 120 VAC
5 thru 48 VDC
Standard coil: 200 mW (single side stable)
Standard coil: 180 mW(bistable)
Sensitive coil: 100 mW (single side stableSensitive coil: 90 mW(bistable)
Contact to coil:1500 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:1500 Vrms
5 x 105 at 2 A at 30 VDC2 x 105 at 0.5 A at 120 VAC
1 x 108 operations
1.39 x 0.39 x 0.39
THT
UL/CSA
1.390.39
0.39
0.420.39
Low profile for compactboard spacing
DC coils to 48 VDC Single and dual coil latchingversions
Meets FCC Part 68.302 &304
High switching capacity, 60 W, 250 VA
Yes
2 Form C
2 A at 30 VDC2 A at 125 VAC
AZ832: 3 thru 48 VDCAZ832P: 2.25 thru 24 VDC
AZ832: 96 mWAZ832P: 128 mW
Contact to coil:1500 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:1000 Vrms
1 x 105 at 2 A at 30 VDC or 1 A at 125 VAC
2 x 106 at 1 A 30 VDC or 0.5 A at 125 VAC
2 x 107 operations
0.80 X 0.39 X 0.42
THT
UL/CUR
AZ832/AZ832P
0.740.42
0.61
Small footprint Low cost Class B (130C) insulation standard
10 Amp switching capacity
Yes
1 Form A, C
1 Form A:5 A at 30 VDC/250 VAC
10 A at 125 VAC10 A LRA/1.5 A FLA
at 120 VAC1 Form C:
3 A at 30 VDC or250 VAC
3 thru 48 VDC
Standard: 253 mWSensitive: 113 mW
Contact to coil:2500 Vrms
Between open contacts:1000 Vrms
1 x 105 at 5 A at 240 VAC
1 x 107 operations
0.74 x 0.42 x 0.61
THT
UL/CUR
AZ767
0.80
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXIMATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
8
0.550.35
0.20
AZ850/AZ851 Bistable (latching) versionsavailable
Microminiature size Meets FCC Part 68.302 High sensitivity (79 mW) Stable contact resistancefor low level signal switching
All plastics meet UL94 V-0,30 min. oxygen index
Yes
2 Form C
1 A at 30 VDC0.5 A at 125 VAC
3 thru 48 VDC
Single Side Stable:79-169 mW
Bistable (latching)Single Coil: 56-84 mW
Bistable (latching)Two Coil:113-169mW
Contact to coil:1000 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:1000 Vrms
1 x 105 at 0.5 A at 125 VAC2 x 105 at 1.0 A at 30 VDC
1 x 108 operations
AZ850: 0.55 x 0.35 x 0.20AZ851: 0.56 x 0.37 x 0.24
THT/SMT
UL/CUR
0.42
0.21
0.28
AZ852/AZ853 Microminiature size Meets FCC Part 68.302 High sensitivity (79 mW) Stable contact resistancefor low level signal switching
All plastics meet UL94 V-0,30 min. oxygen index
Bistable (latching) versionsavailable
Yes
2 Form C
2.0 A at 30 VDC0.5 A at 125 VAC0.3 A at 110 VDC
1.5 thru 24 VDC
79 mW (3-12 VDC)130 mW (24 VDC)
Contact to coil:1500 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:1000 Vrms
1 x 105 at 0.5 A at 125 VDC2 x 105 at 1.0 A at 30 VDC
1 x 108 operations
AZ852: 0.42 x 0.28 x 0.21AZ853: 0.42 x 0.35 x 0.22
THT/SMT
UL/CSA
0.80 0.21
0.50
AZ920 Slim SIP package High sensitivity (58 mW) Class B (130C) insulation standard
Class F (155C) available Up to 5 Amp switching ina compact size
Yes
1 Form A
5 A at 30 VDCor 250 VAC
5 thru 24 VDC
5-18 Volt coils: 58 mW24 Volt coils: 88 mW
Contact to coil:2500 Vrms
Between open contacts:1000 Vrms
1 x 105 at 5 A, 30 VDC Res.
2 x 107 operations
0.80 x 0.21 x 0.50
THT
UL/CUR/TV
0.79
0.49
0.43
Dielectric Strength 3000Vrms
8 Amp switching Class B (130C) insulationstandard
Class F (155C) insulationavailable
Single & Dual coil latchingversions available
Yes
1 Form A, B2 Form A
Form A:8 A at 250 VAC5 A at 30 VDC
Form C:5 A at 250 VAC
5 A 30 VDC
3 thru 24 VDC
192 mW
Contact to coil:3000 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:2000 Vrms
1 x 105 at 8 A at 250 VDC
1 x 107 operations
0.79 x 0.43 x 0.49
THT
UL/CUR
AZ881
AZ940
9
Relay Selection Guide
0.89
0.83
0.91
Two separate relays inone package
Extremely quiet operation Vibration and shock resistant Up to 20 Amp switching ina compact size
ISO/TS 16949, ISO14000
Yes
2X 1 Form C
25 A / 20 A Make/Break2X 1 Form C:
25 A at 20 VDC
12 VDC
203 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
2 x 105 at 20 A at 14 VDC
1 x 107 operations
0.89 x 0.91 x 0.83
THT
AZ935
0.700.38
0.53
AZ934 Two separate relays inone package
Quiet operation Vibration and shock resistant Up to 20 Amp switching ina compact size
ISO/TS 16949, ISO14000
Yes
1 Form C2X 1 Form C
25 A / 20 A Make/Break 1 Form C:
20 A at 14 VDC2X 1 Form C:20 A at 14 VDC
12 VDC
203 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
2 x 105 at 20 A, 14 VDC Res.
1 x 107 operations
1 Form C:0.70x 0.38 x 0.53
2 Form C:0.70x 0.67x 0.53
THT
0.610.62
High switching capacity, 10 Amps
4 kV dielectric strength SPST and SPDT versionsavailable
High sensitivity (113 mW)
Yes
1 Form A,C
Form A10 A at 277 VAC5 A at 30 VDC
Form C3 A at 30 VDC / 250 VAC
3 thru 24 VDC
Standard: 253 mWSensitive: 113 mW
Contact to coil:4000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 10 A at 120 VAC
1 x 107 operations
0.81 x 0.42 x 0.62
THT
0.810.81 0.28
0.60
Extremely small footprint 3 Amp switching inminiature size
High dielectric strength,4000 Vrms
High sensitivity (113 mW)
Yes
1 Form A
3 A at 250 VAC 3 A at 30 VDC
1/10 HP at 250 VAC
4.5 thru 24 VDC
113 mW
Contact to coil:4000 Vrms
Between open contacts:750 Vrms
1 x 105 at 3 A at 30 VDCor 250 VAC
5 x 106 operations
0.81x 0.28 x 0.60
THT
UL/CUR
AZ939
0.890.65
0.66
High switching capacity Extremely low cost Class B (130C) insulation standard
Class F (155C) available High dielectric strength
Yes
1 Form A, C
16 A at 250 VAC12 A at 28 VDC or 277 VAC
1/3 HP at 125 VAC2 A at 240 VAC Pilot Duty
3 thru 48 VDC
230 mW
Contact to coil:1750 Vrms
Between open contacts:1000 Vrms
1 x 105 at 10 A at 277 VAC
1 x 107 operations
0.89 x 0.65 x 0.66
THT
UL/CUR
AZ942
UL/CUR/VDE
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXIMATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
10
0.75 0.61
0.62
Low seated height Low cost TV-5 rating Class B (130C) insulation standard
Class F (155C) available Surface Mount available
Yes
1 Form A, C
Form A15 A at 125 VAC10 A at 277 VAC
TV-5 120 VAC1/2 HP at 125 VAC
Form C10 A at 277 VAC
1/2 HP at 125 VAC125 VA at 120 VAC Pilot Duty
5 thru 48 VDC
203 mW
Contact to coil:1500 Vrms
Between open contacts:1000 Vrm
1 x 105 at 10 A at 277 VAC
1 x 107 operations
0.75 x 0.61 x 0.62
THT
UL/CUR/TV
AZ943
0.870.64
0.65
Extremely low cost High switching capacity Class B (130C) insulation standard
Class F (155C) available DC coils to 48 VDC Meets IEEE 587 6 kV lightning surge
Yes
1 Form A, C
Form A10 A at 28 VDC10 A at 277 VAC
Form C7 A at 28 VDC
12 A at 125 VAC
3 thru 48 VDC
230 mW
Contact to coil:3000 Vrms
Between open contacts:1000 Vrms
Contact to Coil Surge:6 kV
1 x 105 at 10 A at 277 VAC
1 x 107 operations
0.87 x 0.64 x 0.65
THT
UL/CUR
AZ942H
0.76
0.61
High performance Low seated height 6 kV surge withstand Flux tight and sealed versionsavailable
Class B insulation (130 C)standard, Class F (155C)available
UL, CUR file E43203
Yes
1 Form A, C
10 A at 120VAC10 A at 24 VDC10 A at 250 VAC15 A at 120 VAC15 A at 24 VDC
5 thru 48
203 mW
Contact to coil:3000 Vrms
Between open contacts:1000 Vrms
1 x 105 at 10 A 120 VAC
1 x 106 operations
0.76 x 0.62 x 0.61
THT
UL/CUR
AZ943H
NEW
0.620.89
0.650.66
High switching capacity, 20 Amps
Extremely cost effective DC coils to 24 VDC For automotive use Class F (155C) standard QS9000, ISO9001, ISO14001 SAE J2544 tested
Yes
1 Form A, C
20 A at 14 VDC
6 thru 24 VDC
220 mW
Contact to coil:1500 Vrms
Between open contacts:1000 Vrms
1 x 105 at 20 A at 14 VDC
1 x 107 operations
0.89 x 0.65 x 0.66
THT
AZ942A
0.49
0.39
0.30
Subminiature size Designed for compact highdensity mounting
High sensitivity (96 mW) Meets FCC Part 68.302 &68.304
Yes
1 Form C
1 A at 30 VDC0.5 A at 125 VAC0.3 A at 60 VDC
1.5 thru 24 VDC
Standard: 128 mWSensitive: 96 mW
Contact to coil:1250 Vrms
Between open contacts:400 Vrms
1 x 105 at 0.5A at 120 VAC
1 x 107 operations
0.49 x 0.30 x 0.39
THT
UL/CUR
AZ957
0.41
0.81
0.81
Subminiature size Designed for compact highdensity mounting
High sensitivity (129 mW) Withstands 4 kV surge Class B (130C) insulation standard
Yes
1 Form A, C
Form A5 A at 250 VAC3 A at 30 VDC
Form C5 A/3 A at 250 VAC5 A/3 A at 30 VDC
3 thru 48 VDC
Standard: 176 mWSensitive: 129 mW
Contact to coil:2000 Vrms
Between open contacts:1000 Vrms
Contact to coil surge:4000 V
1 x 105 at 5 A at 240 VAC
1 x 107 operations
0.81 x 0.41 x 0.81
THT
UL/CUR
AZ961
0.42
0.47
0.62
Subminiature size for high density packaging
High sensitivity (114 mW) Coils to 24 VDC Extremely low cost 5 or 6 pin PC layout Class B (130C) and Class F(155C) available
Yes
1 Form C
2 A at 125 VAC1 A at 30 VDC
3 thru 24 VDC
Standard: 114 mW
Contact to coil:1250 Vrms
Between open contacts:750 Vrms
1 x 105 at 2 A at 120 VAC
1 x 107 operations
0.62 x 0.42 x 0.47
THT
UL/CUR
AZ954 Subminiature size Coils up to 48 VDC Extremely low cost
Yes
2 Form C
6 A at 30 VDC5 A at 277 VAC6 A at 125 VAC
3 thru 48 VDC
384 mW
Contact to coil:1000 Vrms
Between open contacts:750 Vrms
Contact set to contact set:1000 Vrms
1 x 105 at 5 A at 277 VAC
2 x 107 operations
0.85 x 0.63 x 0.65
THT
UL/CUR
AZ946
0.65
0.630.85
11
Relay Selection GuideNEW
High Performance Low seated height Flux tight version Class B insulation (130C) Class F insulation (155C)UL, CUR file E43203
Yes1 Form A, C
Form A15 A at 125 VAC10 A at 277 VAC
TV-5 120 VAC125 VA at 120 VAC
Form C10 A at 277 VAC
1/2 HP at 125 VAC125 VA at 120 VAC
5 thru 48
203 mW
Contact to coil:1500 Vrms
Between open contacts:1000 Vrms
1 x 105 at 10 A 277 VAC
1 x 107 operations
0.76 x 0.62 x 0.61
SMT
UL/CUR
AZ943S
0.610.76
0.62
AZ975/AZ976
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXMIATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
12
0.700.780.60
0.71
0.63 0.63
20 A switching in compact size
Small footprint Open, covered or sealed Six different contact arrangements available
Vibration and shock resistant ISO/TS 16949, ISO14000 SAE J2544 tested
Yes
1 Form A, B, C, U, V, W
Form A20 A at 14 VDC15 A at 13 VDC
6, 12, 24 VDC
514 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 12 A at 14 VDC
1 x 107 operations
AZ975:0.52 x 0.63 x 0.71
AZ976:0.70 x 0.60 x 0.78
THT
AZ977 Up to 20 Amp switchingcapability
Coils to 24 VDC Class F insulation systemstandard
Vibration and shock resistant Cost effective
No
1 Form A, C
20 A at 14 VDC
6 thru 24 VDC
Standard: 534 mWSensitive: 421 mW
Contact to coil:1000 VDC
Between open contacts:500 VDC
1 x 105 at 20 A 14 at VAC
1 x 106 operations
.906 x .610 x 1.02
X
X
0.91 0.61
1.02
AZ979 80 Amp contact rating -Super ISO
High operating temperature(85C)
Quick connect terminals QS 9000, ISO9001, ISO14000 Tested in accordance withSAEJ2544
Yes1 Form A, B, C
Form A80 A at 14 VDC
Form B, C60 A at 14 VDC
6 thru 24 VDC
760 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 80 A 14 VDC
1 x 107 operations
1.173 x 1.315 x 1.614
X
X
X
1.62 1.32
0.98
Mini-ISO 40 A contact rating Quick connect terminals Metal or plastic mountingbracket options
Shrouded models Resistor or diode parallel tocoil available
ISO/TS 16949, ISO14000 SAE J2544 tested
Yes
1 Form A, C
Form A40 A at 14 VDC
Form C 40/30 A at 14 VDC
6, 12, 24 VDC
680 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 40 A at 14 VDC
1 x 107 operations
AZ973:1.03 x 1.03 x 0.93
AZ974:1.00 x 1.00 x 1.00
THT
Quick-Connects X
X
1.030.93
1.03
AZ973/AZ974
1.001.00
1.00
13
Relay Selection Guide
AZ986
1.0
1.12 1.12
280-ISO Up to 20 A switching in acompact size
Small footprintShroud model Vibration and shock resistant
Designed for high in-rushapplications (120 A)
No
1 Form A, C
Form A20 A at 14 VDC
Form C20/10 A at 14 VDC
6, 12 and 24 VDC
534 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 20 A at 14 VDC
1 x 106 operations
0.91 x 0.61 x 1.01
THT
AZ984
0.61
1.01
0.91
80 Amp contact rating High momentary current(500 A)
High operating temperature (85 C)
ISO/TS 16949, ISO14000 SAE J2544 tested
Yes
1 Form A, B, C
Form A80 A at 14 VDC
Form B, C60 A at 14 VDC
6 thru 24 VDC
760 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 80 A at 14 VDC
1 x 107 operations
1.14 x 1.14 x 1.10
THT
AZ983
1.14
1.10
1.14
AZ980 80 Amp contact rating -Super ISO
High momentary carry cur-rent (500A)
Quick connect terminals High operating temperature(85 C)
Tested in accordance withSAEJ2544
Yes
1 Form A, B, C
Form A80 A at 14VDC
Form B, C60A at 14 VDC
6 thru 24 VDC
760 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 80 A 14 VDC
1 x 107 operations
1.17 x 1.17 x 0.98
Quick Connect
X
1.171.17
280-ISO 40 Amp contact rating High operating temperature Quick connect terminals Vibration and shock resistant Shrouded weatherproofcover available
Resistor or diode parallel tocoil available
Yes
1 Form A, C
Form A40 A at 14 VDC
Form C 30 A at 14 VDC
6, 12 and 24 VDC
580 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 40 A at 14 VDC
1 x 107 operations
1.12 x 1.12 x 1.0
X
X
Up to 30 A switching in acompact size
Cost effective Vibration and shock resistant Designed for high in-rushapplications
ISO/TS 16949, ISO14000 SAE J2544 testedDual versions available
Yes
1 Form A, C2 Form A, C
30 A at 16 VDC
10, 12, and 24 VDC
187 mW
Contact to coil:500 VDC
Between open contacts:500 VDC
3 x 105 at 20 A at 14 VDC
1 x 106 operations
0.48 x 0.52 x 0.40
THT
AZ987
0.520.400.48
0.98
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXMIATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
14
Micro-ISO Up to 30 A Switching in acompact size
Cost effective Vibration and shock resistant Designed for high in-rushapplications
ISO/TS 16949, ISO14000 SAE J2544 tested Dual versions available
Yes
1 Form A, C
Form A30 A at 12 VDC
Form C20 A (N.O.)/10 A (N.C.) at 12 VDC
12 and 24 VDC
Standard: 576 mWSensitive: 418 mW
Contact to coil:500 VRMS
Between open contacts:500 VRMS
1 x 105 at 20 A at 12 VDC
1 x 107 operations
0.91 x 0.61 x 0.99
THTX
AZ988
0.99
0.910.61
NEW
1.200.62
0.97
Low cost per switched watt UL 873 spacing Class B (130C) insulation standard
Class F (155C) insulationavailable
30 A Form C rating Coils to 110 VDC
No
1 Form A, B, C
40 A at 250 VAC (N.O.)30 A at 240 VAC1 HP at 125 VAC2 HP at 240 VAC
5 thru 110 VDC
500 mW
Contact to coil:2500 Vrms
Between open contacts:1500 Vrms
1 x 105 at 30 A at 120 VAC
1 x 107 operations
1.20 x 0.97 x 0.62
THT
Quick-Connects - AZ2120
UL/CUR/VDE
AZ2110/AZ2120 Low cost per switched watt UL 873 spacing Class B (130C) insulation standard
Class F (155C) insulationavailable
30 A Form C rating Coils to 110 VDC
Yes
1 Form A, B, C
40 A at 250 VAC (N.O.)30 A at 240 VAC1 HP at 125 VAC2 HP at 240 VAC
5 thru 110 VDC
500 mW
Contact to coil:2500 Vrms
Between open contacts:1500 Vrms
1 x 105 at 30 A at 120 VAC
1 x 107 operations
1.27 x 1.09 x 1.10
THT
UL/CUR/VDE
AZ2100
1.27
1.101.09
Up to 25 A Switching in acompact size
Cost effective Single and dual (twin) relay Vibration and shock resistant Epoxy sealed for automaticwave soldering
ISO/TS 16949, ISO14000 SAE J2544 tested
Yes
1 Form C2 Form C
25 A at 16 VDCLocked Motor
12 VDC
230 mW
Contact to coil:500 VAC
Between open contacts:500 VAC
1 x 105 at 25 A at 14 VDCLocked Motor
1 x 106 operations
0.56 x 0.29 x 0 .540.56 x 0.56 x 0.54 (Dual)
THT
AZ989
0.55
0.620.570.560.29
0.54
15
Relay Selection Guide
1.98
0.751.08
AZ2280 Quick connects for coil &contacts
AC and DC coils available Coils to 277 VAC Class F (155C) standard
Yes
1 Form A, B, C
Form A: 30 A at 277 VAC2 HP at 250 VAC1 HP at 125 VAC
Form B: 15 A at 277 VAC10 A at 28 VDC
Form C: 30/20 A (N.O./N.C.)at 277 VAC
20/10 A (N.O./N.C.) at 28 VDC
5 thru 110 VDC12 thru 277 VAC
DC: 500 mWAC: 1.4 VA
Contact to coil:2500 Vrms
Between open contacts:1500 Vrms
1 x 105 at 30 A at 120 VAC
1 x 107 operations
1.98 x 1.08 x 1.09
Quick-ConnectsX
UL/CUR
1.28
1.10
1.08
AZ2270 Quick connect leads for con-tacts
AC and DC coils available Coils to 277 VAC High dielectric strengthversions available (4000 Vrms)
Class F (155C) standardYes
1 Form A, B, C
Form A: 30 A at 277 VAC2 HP at 250 VAC1 HP at 125 VAC
Form B: 15 A at 277 VAC10 A at 28 VDC
Form C: 30/20 A (N.O./N.C.)at 277 VAC
20/10 A (N.O./N.C.) at 28 VDC
5 thru 110 VDC12 thru 277 VAC
DC: 590 mWAC: 1.3 VA
Contact to coil:2500 Vrms
High Strength version:4000 Vrms
Between open contacts:1500 Vrms
1 x 105 at 30 A at 120 VAC
1 x 107 operations
1.28 x 1.08 x 1.10
THT
Quick-Connects
X
UL/CUR
AZ2200
1.25
0.751.06
Low cost per switched watt UL 873 spacing Class B (130C) insulation standard
Class F (155C) insulationavailable
30 A Form C rating Coils to 110 VDC
Yes
1 Form A, B, C
40 A at 250 VAC (N.O.)30 A at 277 VAC1 HP at 125 VAC2 HP at 240 VAC
5 thru 110 VDC
500 mW
Contact to coil:2500 Vrms
Between open contacts:1500 Vrms
1 x 105 at 30 A at 120 VAC
1 x 107 operations
1.25 x 1.06 x 0.75
THT
UL/CUR/VDE
AZ2150 Quick connect leads for con-tacts
AC and DC coils available Epoxy sealed versions avail-able
UL Class F (155 C) stan-dard
UL, CUR file E44211
Yes
1 Form A, B, C
30 A at 277 VAC 2 HP at 250 VAC1 HP at 125 VAC
20/60 (FLA/LRA)at 277 VAC
5 thru 48 VDC12 thru 277 VAC
DC:500 mWAC: 1.4 VA
Contact to coil:2500Vrms
Between open contacts:1500 Vrms
1 x 105 at 30 A at 120 VAC
1 x 107 operations
1.27 x 1.08 x 1.09
THT
UL/CUR
1.27 1.08
1.09 0.75
1.89
1.22
Low cost 30 Amp switching 144 Amp inrush current Quick connect terminals Creepage distance morethen 8 mm
UL, CUR file E44211
No
1 Form A
Form A: 30 A at 250 VAC2 HP 125/250 VACTV-15 at 120 VAC
3 thru 60 VDC
588 mW
Contact to coil:4000 Vrms
Between open contacts1200 Vrms
1 x 105 at 30 A 240 VAC
1 x 107 operations
1.40 x 1.30 x 0.25
Quick-ConnectsX
UL/CUR
AZ2310
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXMIATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
16
NEW
1.88
2.370.57
100 Amps switching Heavy loads to 24000 VA 4 kV dielectric Meets 8 mm creepage Mechanical position indicatorwhich may be also used formanual operation or to actuate a micro-switch
Latching
No
1 Form A
96 A at 250 VAC
6, 12 and 24 VDC
Single Coil: 1.44 WDual Coil: 2.88 W
Contact to coil:4000 Vrms
Between open contacts:2000 Vrms
1 x 105 at 50 A 250 VAC
1 x 106 operations
2.37 x 0.57 x 1.88
AZ2510
1.32
1.99
1.85
High in-rush capability Quick-connects Class B (130C) insulationstandard
Screw terminal available Standard (2.4 mm) and widecontact gap (3.0 mm) available
AC and DC coils available Class F (155C) insulationavailable
No
1 Form X (SPST)2 Form X (DPST)30 A at 277 VAC
1.5 HP at 120 VAC3 HP at 240 VACTV-10 at 120 VAC
3 thru 200 VDC6 thru 240 VAC
DC: 1.08 WAC: 1.2 VA
Contact to coil:4000 Vrms
Between open contacts:2000 Vrms
1 x 105 at 30 A 120 VAC
1 x 106 operations
AZ2700: 1.99 x 1.32 x 1.85AZ2701: 2.07 x 1.32 x 2.09AZ2702: 2.03 x 1.37 x 1.42AZ2703: 2.03 x 1.37 x 1.42
AZ2704 x 1.99 x 1.32 x 1.42THT
Quick-ConnectsX
UL/CUR/TV
AZ2700AZ2705
0.641.51
1.20
Heavy loads to 15000 VA 4 kV dielectric 60 Amp switching Epoxy sealed constructionavailable
Latching
Yes
1 Form A
60 A at 250 VAC
5 thru 48 VDC
Single coil: 486 mWDual coil: 980 mW
Contact to coil:4000 Vrms
Between open contacts:1500 Vrms
1 x 105 at 40 A at 250 VAC
1 x 106 operations
1.51 x 0.64 x 1.20
THT (coil only)
UL/CUR
AZ2501AZ2500 Low cost 50 Amp switching Heavy loads to 13850 VA 4 kV dielectric Manual switch available Epoxy sealed versionavailable
UL, CUR file pending
Yes
1 Form A, C
50 A at 277 VAC5 HP at 240 VAC20 A at 240 VAC
6 thru 48 VDC
Single coil: .96 WDual coil: 1.9 W
Contact to coil:4000 Vrms
Between open contacts:1500 Vrms
1 x 105 at 40 A at 250 VAC
1 x 106 operations
1.51 x 0.64 x 1.20
THT
UL/CUR
1.55
1.20
0.61
17
Relay Selection Guide
High Sensitivity, 120 mW Proof tracking index(PTI/CTI) 250
Dielectric strength 5000Vrms
10 Amp switching capability UL, CUR file E43203VDE file 40010953
Yes
1 Form A 1 Form C 2 Form C
10 A at 250 VAC10 A 30 VDC
5 A at 250 VAC
5 thru 60 VDC
120 mW
Contact to coil:5000 Vrms
Between open contacts:1500 Vrms
Contact set to contact set:2500 Vrms
1 x 105 at 8 A at 250 VAC
3 x 107 operations
1.12 x 0.39 x 0.49
THT
UL/CUR/VDE
0.39
0.49
1.12
AZ6962
1.13
0.490.41
10 Amp switching capability High sensitivity, 120 mWpickup
Dielectric strength 5000Vrms
Class B (130C) insulationstandard, Class F available
Isolation spacing greaterthan 8 mm
Yes
1 Form A, C
10 A at 250 VAC8 A at 30 VDCB300 Pilot DutyR300 Pilot Duty
1/4 HP at 125 VAC1/2 HP at 250VAC
5 thru 60 VDC
120 mW
Contact to coil:5000 Vrms
Between open contacts:1000 Vrms
3 x 105 at 8 A at 240 VAC
1 x 107 operations
1.13 x 0.41 x 0.49
THT
UL/CUR/VDE
AZ6961
2.69
1.49
1.36
30 Amp switching capability DPST-N.O. and DPDT configuration
Meets 8 mm creepage, 4000 Vrms dielectric
Class F (155C) insulationstandard
Yes
2 Form A, C
30 A at 277 VAC (N.O.)1 HP at 120 VAC (N.O.)
2.5 HP at 240 VAC (N.O.)3 A at 277 VAC (N.C.)
6 thru 110 VDC12 thru 277 VAC
DC: 925 mWAC: 2.6 VA
Contact to coil:4000 Vrms
Between open contacts:1500 Vrms
Contact set to contact set:2000 Vrms
1 x 105 at 30 A at 120 VAC
5 x 107 operations
AZ2800:2.69 x 1.36 x 1.49
AZ2850:2.06 x 1.36 x 1.20
THT (AZ2850)Quick-Connects: AZ2800
AZ2800
UL/CUR
AZ2800/AZ2850 AZ6951
0.69
0.48
0.25
Small footprint utilizing only0.18 sq inch
High sensitivity Epoxy sealed for automaticwave soldering & cleaning
Thin vertical profile only0.25 wide
UL/CUR File E43203
Yes
1 Form A
5 A at 30 VDC resistive5 A at 250 VAC general use
5 thru 24 VDC
100 mW
Contact to coil:3000 Vrms
Between open contacts:750 Vrms
1 x 105 at 5 A at30 VDC or 250 VAC
2 x 107 operations
0.69 x 0.25 x 0.48
THT
UL/CUR
0.39
0.45
0.80
Low profile Bifurcated contacts Meets FCC Part 68.302 &68.304
Fits standard 16-Pin IC socket
Ultra-sensitive, 84 mW pickup
High switching capacityYes
2 Form C
2 A at 30 VDC1 A 125 VAC
3 thru 48 VDC
Standard: 180 mWSensitive: 100 mW
Ultra-sensitive: 84 mW
Contact to coil: 1500 VrmsBetween open contacts:
1000 VrmsContact set to contact set:
1500 Vrms
1 x 105 at 2 A at 30 VDC
1 x 107 operations
0.80 x 0.39 x 0.45
THT
UL/CUR
AZ8222
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXMIATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
18
0.61
0.55
0.48
0.60
0.83 0.63
0.80
AZ9321 High performance Low seated height Flux tight and sealed versions available
Class B (130C) insulationstandard
Yes
1 Form A, C
Medium duty:10 A at 24 VDC or 120 VAC
Heavy duty:15 A at 24 VDC10 A at 250 VAC15 A at 120 VAC
5 thru 48 VDC
203 mW
Contact to coil:1500 Vrms
(6kV version) 3000 VrmsAcross contacts:
1000 Vrms
1 x 105 at 10 A at 120 VAC
1 x 106 operations
0.76 x 0.61 x 0.60
THT
UL/CUR
AZ9431 High performance 6 kV lightning surgewithstand
Flux tight and sealedversions available
Class F insulation systemstandard
UL, CUR file E44211
Yes
1 Form A, C
20 A at 125 VAC17 A at 277 VAC1HP at 250 VAC1HP at 125 VACTV-8 at 125 VAC
5 thru 48 VDC
203 mW
Contact to coil:3000 Vrms
Between open contacts:1000 Vrms
5 x 104 at 20 A at 120 VAC
1 x 107 operations
0.83 X 0.63 X 0.80
THT
UL/CUR
NEW
Subminiature size High in-rush capability 25 A switching in compact size
High operating temperature 0.3 mm contact gap ISO/TS 16949, ISO14000 Tested in accordance withSAE J2544
Yes
1 Form C
20 A at 14 VDC(motor make)
4 A at 14 VDC(motor break)
6 thru 24 VDC
222 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 25 A at 14 VDC
1 x 106 operations
0.61 x 0.48 x 0.55
THT
AZ9471
0.76 0.610.30
0.36
0.59
AZ8462 Microminiature size Meets FCC Part 68.302 &68.304
Meets Bellcore 2.5 kV surge test
Low profile DIP package Bifurcated contacts High sensitivity (79 mW) Bistable (latching) versionsavailable
Yes
2 Form C
2.0 A at 30 VDC0.5 A at 125 VAC
1.5 thru 48 VDC (AZ8462)
79 mW (3-24 VDC)152mW (48VDC)
Contact to coil:1500 Vrms
Between open contacts:1000 Vrms
Contact set to contact set:1000 Vrms
1 x 105 at 0.5 A at 125 VAC2 x 105 at 1.0 A at 30 VDC
1 x 108 operations
0.59 X 0.30 X 0.36 (AZ8462)
THT/SMT
UL/CUR
19
Relay Selection GuideNEW
0.60
0.80
0.60
10 A switching in miniature size
Epoxy sealed version available
Creepage/Clearance4mm/3mm
Class F (155C) insulationstandard
Yes
1 Form A, C
Form A10 A at 250 VAC
Form C10 A/4 A at 250 VAC
5 thru 36 VDC
200 mW
Contact to coil:2500 Vrms
Between open contacts:1000 Vrms
5 x 104 at 10 A at 250 VAC
5 x 106 operations
0.60 x 0.60 x 0.80
THT
UL/CUR
AZ9621
1.040.91
0.880.72
0.75
0.87
Cost effective High in-rush capability Open or sealed versionsavailable
US & European footprints Coils to 24 VDC ISO/TS 16949, ISO14000 Tested in accordance withSAE J2544
Yes
1 Form A, C
45 A at 14 VDC
6, 9,12, 24 VDC
Standard coil:484-573 mW
Sensitive Coil:675 mW
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 40 A at 14 VDC
5 x 106 operations
Open (AZ9701):0.91 x 0.75 x 0.72Sealed (AZ9711):1.04 x 0.87 x 0.88
THT
UL/CUR
AZ9701/AZ9711AZ9481F
NEW
High power switching(4000 VA)
High sensitivity, 128 mWpickup
DC coils up to 48 VDC Low profile (less than .5height)
UL file E43203
Yes
1 Form A, C
Form A10 A at 250 VAC10 A at 30 VDC16A at 125VAC
Form C10/6 A (N.O./N.C.) at 250 VAC10/6 A (N.O./N.C.) at 30 VDC
T Version - 5
5 thru 48 VDC
128 mW
Contact to coil:2500 Vrms
Between open contacts:1000 Vrms
1 x 105 at 10 A at 250 VAC
1 x 107 operations
0.89 x 0.65 x 0.45
THT
UL/CUR/TV
AZ9481
0.890.65
0.45
Super-ISO 70 Amp contact rating (SuperISO)
High momentary carry cur-rent (500 A)
ISO/TS 16949, ISO14000 Tested in accordance withSAE J2544
Yes
1 Form A
70 A at 14 VDC
6, 12, 24
0.68 W
Contact to coil:500 Vrms
Between open contacts:500 Vrms
1 x 105 at 70 A at 14 VDC
1 x 107 operations
1.03 x1.03 x.980
Quick Connects
X
X
1.03
0.98
1.03
AZ9801
NEW
Quick connect and PCterminals
High power switching (4000VA)
High sensitivity, 128 mWpickup
UL file E43203, TVR50053055
Yes
1 Form A
10 A at 250 VAC 10 A at 30 VDC16 A at 125 VAC10 A at 30 VDC
16 A at 250 VAC8 A at 250 VAC10 A at 30 VDC
5 thru 48 VDC
128 mW
Contact to coil:2500 Vrms
Between open contacts:1000 Vrms
1 x 105 at 10 A at 250 VAC
1 x 107 operations
1.11 x 0.90 x 1.11
THT
Quick Connects
UL/CUR/TV
1.11
1.11
0.90
0.26
0.79
0.95
Photo isolation 600V blocking voltage Both Zero Voltage andphase controllable RandomSwitching versions
High Surge Capability
Yes
4 thru 28.8 VDC
15 mA
1.0 VDC
50 to 250 VAC
2 A
30 A
15 mA
1.5 mA
47 to 70 Hz
2000 Vrms
1000 megohms min.at 500 VDC
-30C (-22F) to 80C (176F)
0.95 x 0.26 x 0.79
THT
UL/CUR
SGC-4F Photo isolation 800V blocking voltage Both Zero Voltage andphase controllable RandomSwitching versions
High Surge Capability Built-in Snubber Triac Output Circuitry
Yes
3 VDC max.
15 mA
1.0 VDC
Type 24: 48 to 240 VACType 38: 48 to 380 VAC
40 A
400 A
0.1 mA
3 mA to 10 mA
47 to 70 Hz
4000 Vrms
1000 megohms min.at 500 VDC
-30C (-22F) to 80C (176F)
2.30 x 1.80 x 0.90
UL/CUR
SGX-1505FB
1.80
2.30
0.90
Plug-in / solder terminals High switching capacity AC and DC coils Unique Armature stop,maintains adjustment
Class F Insulation UL, CUR file E44211
No
13 A at 120 VAC13 A at 277 VAC 3 A at 600 VAC
1/3 HP at 120 VAC1/2 HP at 277 VAC
10 A at 28 VDC1HP at 277 VAC
3/4 HP at 600 VacB600 Pilot Duty
12 thru 240 VAC12 thru 110 VDC
DC : 675 mWAC:1.6 VA
Contact to coil:2200 Vrms
Between open contacts:800 Vrms
Contacts set to contact set:2200 Vrms
1 x 105 at rated load
1 x 107 operations
2.90 x1.50 x 2.20
X
UL/CUR
FEATURES
EPOXY SEALED
COIL VOLTAGES
COIL POWER AT PICKUPVOLTAGE(typical)
DIELECTRICSTRENGTH(at sea level for 1 min.)
Electrical
Mechanical
APPROXMIATESIZE IN INCHESL X W X H
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
Form
Ratings(Resistive)
CONT
ACTS
TYPI
CAL
LIFE
TERM
INAL
S
Relay Selection Guide
At rated load unless otherwisespecified
SERIES
20
Photo isolation Up to 800V blocking voltage LED status indicator Both Zero Voltage andphase controllableSwitching versions
High Surge Capability Built-in Snubber Triac Output Circuitry
Yes
3 thru 32 VDC
35 mA at 32 VDC
1.0 VDC
36 to 440 VAC
25 A
250A
0.1 mA
3 mA to 10 mA
47 to 70 Hz
4000 Vrms
1000 megohms min.at 500 VDC
-30C (-22F) to 80C (176F)
4.14 x 2.96 x 1.19
UL/CUR
SG-24F
4.141.19
2.96
NEW
AZKUP
2.20
1.50 1.37
1-3 Form C
FEATURES
EPOXY SEALED
Turn on Voltage
Current
Turn off Voltage
Voltage Range
Maximum Current
Maximum Inrush
Min. Load Current
Leakage Current
Frequency Range
INPU
TO
UTPU
T
DIELECTRICSTRENGTH(at sea level for 1min.)
INSULATIONRESISTANCE
AMBIENTOPERATINGTEMPERATURE
PCSolder/Plug-inBracket Mount
Socket
APPROVAL
APPROXMIATESIZE IN INCHESL X W X H
ELECTROMECHANICAL RELAYS
AZ880 10A Latching
AZPRD 50 A 1 & 2 PoleAZ2250 30 A with 600 mW
XMC0 Contactors (50-60 Amp) TS Series Thermistors / Temp. SensorsZCS1-70/71-120 High Current SolenoidsZCPR Potential Motor Start Relays
21
Relay Selection Guide
Other Products
Upcoming New Products
22
Relay Footprints
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
AZ5
AZ8
.70.42
.18.39
.56
.16 .52
.41
.52
.66
.26
.66.41
.16.52
.17.16
.41.66
1CT & 2CT
2C
3C 4C
AZ164
AZ164-AZ168
.458
.458
.458
.543
2 POLE
.406
4 POLE
.406
.106
6 POLE
.406
.106
.106.543
.543
AZ420
.70.42
.18.39
.56
.16 .52
.41
.52
.66
.26
.66.41
.16.52
.17.16
.41.66
1CT & 2CT
2C
3C 4C
23
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
.197.590 .197
.295
AZ742
.197.787
.295
AZ733W
.590 .197
.295
AZ734
AZ743
.197.590 .197
.295
AZ755
.299
.787.138
AZ756
D
VERSION[3.5].138
5 x .051[1.3]
.295[7.5]
OMIT FORFORM A .138
[16.5].650
C
[3.5]
AZ673
.138.138.649
.295
AZ697
.197.197
.590
.295
AZ733
Relay Footprints
.197.590 .197
.295
.070 .143
.465
.855
AZ760
.024[0.60]
.295[7.50]
[17.20]
AZ757
24
Relay Footprints
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
.400
.465
.139
AZ766
.300
.055.055
.051
.494FORM C
FORM A
AZ765
.197.590
.197
.295
AZ764AZ762
[5.0].197
[5.0].197
[15.0].591
[2.5].098
[0.8]2X .032
[1.3]
[2.5].098
[7.5]
6X .050
.295
AZ761
[7.6].299
.101[2.56]
.260[6.6]
[5.0].197
[5.0].197
[3.5].138
[1.3]
[6.6].260
[20.0].787
[1.3]5X .051
[20.0].787
[7.6].299
[3.5].138
5.0mm SPACING FORM "C"
3.5mm SPACING FORM "C"
[2.5].098
[2.5].098
[7.5].295
[7.5].295
.098[2.5]
.098[2.5]
[2.5].098
[1.3]
[5.0].197
5 x .051
.787[20.0]
.197[5.0]
[1.3]5 x .051
5 x .051[1.3]
.098[2.5]
[5.0].197
[5.0].197
[3.5].138
[20.0].787
[20.0].787
[7.5].295
[3.5].138
1 FORM C5.0mm RIGHT SPACING
AZ763R
1 FORM C5.0mm LEFT SPACING
AZ763L
AZ763
1 FORM C3.5mm SPACING
*
*
*
* Not used on 1 Form A relay
AZ763
AZ762F
4-.059[1.50]
.197[5.00]
1.280[32.50]
.295[7.50]
2-.051[1.30]
.098[2.50].098[2.50]
25
Relay Footprints
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
.441
.059
.300
.100
AZ767
.30[7.6]
.50[12.7]
.1[2.54]
.06[1.5]
.30[7.6]
.60[15.24]
.157[4]
.25[6.35]
Type 2
Type 1
AZ770
.748
.240
1.087
.866
.150
.472
AZ769
AZ830-4POLE
AZ832
AZ832P
.26
10x.04
10x.12
8x.10
AZ851
AZ850
AZ852THT
SMT
SMTss
0.2[5.08
0.13[3.2] 0.09[2.2] 0.09[2.2]
0.13[3.2] 0.09[2.2] 0.09[2.2]
0.26[6.64]
0.03[0.8]
0.24[6.14]
0.09[2.2]0.09[2.2]
.100[2.56]
.08[2.08]
0.13[3.2]
0.03[0.8][0 8
26
AZ940
.472.236
.078.480
AZ942H
.480.078
.236.472
AZ942/AZ942A
AZ939
.185[4.7]
4- .043[1.1]
.276[7.0]
.453[11.5]
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
Relay Footprints
.098 [2.5]
.086 [2.2]
.246 [6.25]
.541 [13.75]
.148 [3.75]
.11 [2.8]
.246 [6.25]
.098 [2.5]
.541 [13.75]
.148 [3.75]
.148 [3.75]
.148 [3.75] .11
[2.8]
.087 [2.2]
AZ934
.665
3 x .148
.148
.738
.226
.148
AZ935
AZ920
0.1[2.54]
0.3[7.62]
0.3[7.62]
0.1[2.54]
0.4[10.16]
0.2[5.08]
Standard
AZ853
.125[3.2]
.125[3.2]
.3[7.6].09[2.2][
8-.124[3.1]
8-.031[0.8]
.21[5.3]
.3[7.6].125[3.2] [2.2]
8-.03[0.8]
8-.09[2.25]
.125[3.2] .09[2.2]
.175[4.45]
THT
SMTss
SMT
.3[7.6]
.400[10.16]
.300[7.62]
.300[7.62]
4-.047[1.20]
.400[10.16]
.300[7.62]
.300[7.62]
6-.047[1.20]
Single side stable & 1 coil latching
-1A -1 AB
2 coil latching-1 A -2A, -1 AB
.100[25.4]
.300[7.62]
.300[7.62]
.300[7.62]
6-[.047][1.20]
.100[25.4]
.300[7.62]
.300[7.62]
.300[7.62]
8-[.047][1.20]
Viewed Toward Terminals
AZ881
K Version
27
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
Relay FootprintsAZ957
AZ954
.20.40
.15
.15
.20
.10
AZ946
AZ943/AZ943H
AZ943SAZ973
.315
.39
.665
5x.248
AZ961
AZ975/AZ976
0.047[1.20]
0.056[1.42]
1 4 2
5
3 6
7
1 4 2
5
3
7
6
0.200[5.08]
0.350[8.89]
0.150[3.81]
0.200[5.08]
0.033[0.85]
0.073[1.85]
0.150[3.81]
0.350[8.89]
0.200[5.08]
0.200[5.08]
7-0.051[1.30]
7-0.051[1.30]
0.071[1.80]
0.094[2.40]
.559[14.20]
5X.051[1.30]
.236[6.00]
.472[12.00]
.480[12.20]
.134[3.40] .059[1.49]
VIEWED TOWARD TERMINALS
.059[1.50]
.236[6.00]
.472[12.00]
5X.197[5.00]
.606[15.40] 5X.079
[2.00]
.100[2.54]
.200[5.08]
.300[7.62]
6x.039[1.0]
87 85
86
1A
30
87A
30
86
1C
87 85
.665
[16.9]
.330
[8.4] .705
[17.9]
.665
[16.9]
.705
[17.9]
.330
[8.4]
.315
[8]
.080
[2].080
[2]
.333
[8.45].333
[8.45]
AZ974
28
AZ987
5X.110.008[2.80.2]
5X.031[0.8 ] +0.2
-0.1
+.008-.004
.319.008[8.10.2]
.638.008[16.20.2]
.307[7.8]
AZ986
0.502-.020
.118[3.00]
4-.067[1.7]
.315[8.00]
.764[19.4] 0,079
[2,00].276[7.00]
.315[8.00]
4-.087[1.10]
.402[10.20]
.142[3.60]
.118[3.00]
.020[0.50]
.283[7.20]
.024[0.60]
.053[1.35]
.276[7.00].315[8.00]
.020[0.50]
.118[3.00]
FORM A,CSINGLE
FORM A,C TWIN
2-.067[1.7] .071[1.80]
2-.071[1.80] 4-.087
[1.10]
4-.067[1.7]
Relay Footprints
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
AZ984
AZ983
AZ980
30
87A85.705[17.9]
86
87
.661[16.8]
[8.3].327
[7.9].311
FORM C VERSION SHOWNVIEWED TOWARD TERMINALS
[3.5].137
[10.6].418
[3.8]2 x .150
[7.6]2 x .300
[ 1.93 .076]2 x .076 .003
[8.5].335
[17.0].669
[9.9].390
[ 2.18 .076]9 x .086 .003
[8.4].331
[8.0].315
AZ979
Form A
Form C
1.173MAX[29.8]
.311[7.9]
1.173MAX[29.8]
.327[8.3]
.705[17.9]
.661[16.8]
1.173MAX[29.8]
1.173MAX[29.8]
.327[8.3]
.705[17.9]
.661[16.8]
30
85 8887
87
30
85 88
87
AZ977
[4.5].177
[9.0].354
[14.1].554 [2.6]
.099
[8.0].315
87
30
85
86
87a
42
5 3
*
3X.083[2.10]
.276[7.00]
.315[8.00]
2X.098[2.50]
5X.031[0.80]
.354[9.00] .177
[4.50]
29
Relay Footprints
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
AZ2100
.157[4.0]
.189[4.8]
.031[0.8]
2-.020x.012[0.5x0.3]
3-.047x.012[1.2x0.3]
.331[8.4]
.189[4.8]
.134[3.4]
.189[4.8]
.031[0.8]
4-.012x.020[0.3x1.2]
6-.047x.012[1.2x0.3]
BOTTOM VIEW
.331[8.4]
.157[4.0]
AZ2110
.081 .003(2.06 .076)
.900(22.84)
.300(7.6)
.400(10.2).150(3.81).550(13.96)
.700(17.77)
.043 .003(1.09 .076)
DIA (3 PLACES)
DIA
Viewed toward terminals
.30
.70.40.20
.50.10
.10
.15
Form C
AZ988
AZ2150
AZ2200
.70
.30
.10
.15
.40.20
.50
.10
Form C
C1/C2
C3
AZ989
Form C
30
Relay Footprints
.8508[21.59]
.100[2.54]
.110[2.80]
.751[19.08]
.751[19.08]
1.00 [25.4]
.110
[25.4]1.00
.200
[5.08]
1.00[25.4]
.100
[21.59].850
.110[2.80]
.751 [19.08]
AZ2500P1-1
AZ2500P1-2 "K"
AZ2500P2
AZ2500
AZ2510
.197[5.00]
3X.039[1.00]
.197[5.00]
3X.028[0.70]
0.329 [8.36]
0.571 [14.50]
.44.56
.44
.56
.70
.70
1.44
1.44
2.36
2.36
AZ2700
AZ2501
.167
[4.3]
.472
[12.0]
1.083
[27.5]
.266
[6.8]
.376
[9.6]
.295
[7.5
].1
32[3
.35]
4
32
5
6
.394
[10.
0]
1
.109[2.77]
3x.073
[1.86]
3x.041
[1.04]
Suffix K only
AZ2310
[43.5]1.713
[4.5]2 x .177
2x.14
1.71
AZ2280
.701[17.8]
.551[14.0]
.150[3.8]
.606[15.4]
.906[23.0]
.098[2.5]
2X.032[0.81]
2X.062[1.57]
2X.025SQ[0.64SQ]
.045SQ[1.14SQ]
AZ2270
31
Relay Footprints
.56
.44.56
.44
1.57
.75
.75
1.57
AZ2702
.18
2.35
AZ2800
.75
1.57
.75
1.57
.44.57
.44
.57
AZ2703
1.44
1.44
.70
.57.44 .44
.57
.70
AZ2701
1.44
1.44
.70
.57
.44.57
.44
.70
AZ2704
2.362[60]
AZ2705
.08
1.00
.271.21
.31
.43
.20
.20
.20AZ2850 AZ2850
32
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
Relay Footprints
.23
6[6.
0].23
6[6.
0] .079[2.0]
.480[12.2]
5-.051 [1.3].23
6[6.
0].23
6[6.
0] .079[2.0]
.480[12.2]
4-.051 [1.3]
1A 1C
AZ9321
AZ8222
0.300[7.62]
0.047[1.2]
0.300[7.62]
0.500[12.7]
0.700[17.78]
8X0.035 [ 0.9]
AZ8461
.100[2.54]
.100[2.54]
.59[15.0]
.30[7.5]
.043[1.1] .200[5.08]
.200[5.08]
.046[1.16]
8-.031[0.8]
AZ6962
[3.2].126
.050 [1.3]
[ 1.3]
.298 [7.56]
.744 [18.9]
.116 [2.95]
.198 [5.04]
4 x .051
.126[3.2]
.870 [22.1][ 1.3]
5 x .051
[1.3].050
[1.57].062
[7.56].298
1 FORM A
1 FORM C
VIEWED TOWARD TERMINALS
[3.2].126 .126
[3.2]
[ 1.3]8 x .051
[1.3].050
[1.57].062
[7.56].298
2 FORM C
.744 [18.9]
AZ6961
.870[22.1]
FORM C
FORM A
.744[18.9]
.298[7.56]
4x.051[1.3]
.298[7.56]
5x.051[1.3]
.126[3.2]
.062[1.57]
.126[3.2]
.050[1.3]
.116[2.95]
.198[5.04]
.050[1.3]
0.2
[5.08
]
0.1
[2.54]
0.044
[1.13]
0.3
[7.62]
0.2
[5.08]
AZ6951
.200[5.08]
.200[5.08] .100[2.54]
.100[2.54].200[5.08]
.200[5.08]
SINGLE SIDE STABLE & 1 COIL LATCHING
2 COIL LATCHING
8-0.039[1.00]
10-0.039[1.00]
2 COIL LATCHING
.100[2.54]
SINGLE SIDE STABLE & 1 COIL LATCHING
.100[2.54].200[5.08]
.200[5.08]
.283[7.19]
.283[7.19]
.122[3.11]
.039[1.00]
.039[1.00]
0.122[3.11]
PC Board Layout (SMT type)PC Board Layout (DIP type)
AZ8462
33
Note: All un dimensioned footprints are on .100 grid. All footprints are viewed toward terminals.
Relay Footprints
3.614
1.874
SG-24F
[4.35].171
.056 [1.42]
[1.0]4 x .039
4 x .039 [1.0]
.171 [4.35]
[1.42].056
TERMINAL STYLE "T"
TERMINAL STYLE "M"
SGC-4F
1.870[47.5]
SGX-1505FB
AZ9431
12.00
[14.20]
.480
.559
[12.20]
.236[6.0]
.134[3.40]
.059[1.49]
.472
.40.20
.40
.10
AZ9471
.701[17.8]
0.5[12.7]
0.4[10.2]
0.3[7.62]
.701[17.8]
0.4[10.2]
2-.036[0.9]
2-.036[0.9]
3-.052[1.3]
2-.052[1.3]
0.5[12.7]
FORM A FORM C
AZ9481
3 Yoke Term.
.586[14.88].176[4.47]
.147[3.73]
.268[6.81]
.467[11.87]
.161[4.08].483[12.28]
.148 [3.75]
.211[5.35]
.092[2.33]
.092[2.33]
.211[5.35]
.586[14.88].134[3.4]
.147[3.73].213[5.4]
.467[11.87] .148 [3.75]
.483[12.28]
.161[4.08]
AZ9711
AZ9701/AZ9711
AZ9801
30
85.705[17.9] 86
87
.661[16.8]
[8.3].327
AZKUP
.098[2.5]
.197[5.0]
.197[5.0].
.049[1.25]
.246[6.25]
.197[5.0]
0.295[7.5]
AZ9621
2-.036 [0.9]
.701[17.8]
.561[14.3]
.039[1.0] .071[1.8]
.197[5.0]
.634[16.1]
AZ9481F
34
NAIS (Aromat) ZettlerALD AZ939
CB 40 amp AZ973/AZ974CM AZ988
CT5 AZ934/AZ935DS2 AZ830/AZ832
DS2 Latching AZ830P/AZ832PDS2Y AZ830/AZ832
DS4 AZ830 4-PoleHD AZ955/AZ957HL AZ164/AZ165/
AZ166K 2-Pole AZ420/AZ428K 4-Pole AZ421/AZ429K 6-Pole AZ431/AZ439
KE AZ2428/AZ2429JE-X AZ991JJM AZ9471JM AZ760JR AZ725/AZ755JS AZ942/AZ943
JSM AZ942AJT AZ2100/AZ2200
JTN AZ2110/AZ2210JTN AZ2150/AZ2250
JTN1 AZ2270JV AZ9481
JW1 AZ692/AZ697/AZ761
JW2 AZ732/AZ733/AZ743
LA AZ734LD AZ939LK AZ672/AZ673PA AZ920TQ AZ847/AZ850TW AZ833/AZ8461TX AZ833/AZ8461
Bosch Zettler0 332 AZ988
C P Clare ZettlerLM AZ8222LM AZ830/AZ832LX AZ830P/AZ832PLQ AZ847/AZ850
Crydom ZettlerD53 SG-24F
Fujitsu-Takamisawa Zettler
A AZ847/AZ850BA AZ833/AZ8461
FBR10 AZ833/AZ8461FBR160 AZ942/AZ943
JS AZ6962 FBR210 AZ5X/AZ5Y/
AZ951/AZ952/AZ954X/AZ954Y
FBR240 AZ8222FBR51 AZ9471
Fujitsu-Takamisawa Zettler (cont.)
FBR610 K AZ725/AZ755/AZ762
FBR610 AZ692/AZ697/AZ761
FBR620 AZ732/AZ733/AZ743
FRL AZ9711FTR-F1 AZ743FTR-H1 AZ761FTR-P2 AZ934/AZ935
JS AZ696/AZ6961/AZ6962
LZ AZ8MZ AZ951/AZ954XNA AZ8461/AZ833NY AZ920RA AZ8222/AZ832
RA4 AZ830 4-PoleRY AZ8222/AZ832SY AZ955/AZ957VB AZ732/AZ733/
AZ743VH AZ760VS AZ692/AZ761/
AZ697VSB AZ755/AZ762
Guardian Zettler1390 AC/DC AZ165
1390P AC/DC AZ1641390F AC/DC AZ166
1495 AZ82221505 AZ5Y/AZ952/
AZ954Y1540 AC AZ1651545 DC AZ164
1555 AZ4201575 AZ942/AZ943
1655/1655S AZ692/AZ697/AZ761
1655/1655S AZ732/AZ733/AZ743
167 AZ81690 AC/DC AZ165
1690F AC/DC AZ166
Hasco Zettler2KLT AZ945
BAS-111 AZ952/AZ954YBAS-511 AZ952
CAR AZ973CAS212 AZ8222
HAS-115 AZ8222HAS-211 AZ952HAS-212 AZ8222/AZ830HAT-901 AZ2150/AZ2151HAT-904 AZ2800/AZ2850
HBS AZ957HPR AZ940KLT AZ943
KSD AZ946MHR AZ9481SLT AZ9471
Hasco Zettler (cont.)
SSD AZ8SSR SGC-4F
T AZ850/AZ850P
Idec ZettlerRW AZ830/AZ832RG AZ692/AZ2692/
AZ697/AZ761RCN AZ942/AZ943
RT AZ420
Magnecraft(MSD) ZettlerClass 67 AZ420/AZ421/
AZ431Class 76 AZ692/AZ697Class 76 AZ732/AZ733Class 76 AZ725/AZ755Class 78 AZ164/AZ165Class 90 AZ2110/AZ2120/
AZ2150Class 91 AZ2100/AZ2280
Class 178 AZ942/AZ943Class 272 AZ8222Class 232 AZ5Y/AZ952/
AZ954YClass 232 AZ5X/AZ951/
AZ954XClass 270 AZ942/AZ943Class 277 AZ692/AZ697Class 277 AZ732/AZ733Class 277 AZ725/AZ755Class 281 AZ164/AZ165Class 283 AZKUP
Mid-Tex (CII) Zettler157 AZKUP
MQP AZ847/AZ850MN AZ833/AZ8461MD AZ8222190 AZ8222327 AZ830/AZ832327 AZ830P AZ832P191 AZ955/AZ957MS AZ5Y/AZ952/
AZ954Y410 AZ420500 AZ766501 AZ765496 AZ942/AZ943596 AZ943597 AZ932498 AZ725/AZ755/
AZ762491 AZ2100/AZ2120/
AZ2280590 AZ2110/AZ2150V4 AZ973
AZ942AVM AZ975/AZ976156 AZ164/AZ165/
AZ166
Mid-Tex (CII) Zettler (cont.)
158 AZ164/AZ165/AZ166
258 AZ164/AZ165/AZ166
NEC ZettlerEA2 Z847/AZ7850EB2 Z848/AZ851EC2 AZ833/AZ8461EE2 AZ833/AZ849
MR301 AZ942/AZ942A/ AZ943/AZ9431
MR31 AZ942/AZ943/AZ9431
MR602 AZ8222MR602 AZ830/
AZ832MR602 AZ830P/AZ832PMR604 AZ830 4 POLEMR612 AZ830/AZ831/
AZ832MR612 AZ830P/AZ832P MR614 AZ830 4 POLEMR62 AZ8222MR62 AZ830AZ832
MR622 AZ830/AZ832MR71 AZ692/AZ2692/
AZ697/AZ761MR72 AZ732/AZ2732/
AZ733/AZ743
Omron ZettlerG2E AZ5Y/AZ952/
AZ954YG2L AZ693/AZ2693G2R AZ692/AZ2692/
AZ697/AZ723/AZ732/AZ2732/AZ733/AZ743/AZ761/AZ763/AZ764
G2V AZ8222G4K AZ8G4S AZ942/AZ943/
AZ9431G5C AZ9481G5L AZ942/AZ943/
AZ9431G5N AZ939
G5PA-2 AZ734G5V-1 AZ955/AZ957G5V-2 AZ8222
G6A AZ830/AZ832G6A AZ830P/
AZ832PG6A AZ830 4 POLEG6D AZ6951G6R AZ696/AZ6961G7G AZ2100G7L AZ2700G8H AZ988G8J AZ974
Suggested EquivalentsAmerican Zettler, Inc. offers this list of suggested equivalents by its own and other relay manufacturers part numbers as a guideline for possible inter-changeability. Because critical parameters such as coil resistance, must operate voltage, terminal footprint, etc. may differ slightly, a detailed compari-son between data sheets should be done before selecting a particular relay as an exact cross reference. Due to rapid addition, deletion, and revisionof its own and competitive relays, American Zettler, Inc. cannot guarantee the total accuracy of this list. Questionable interchangeability of productsshould be referred to American Zettler, Inc. for clarification.
35
Suggested EquivalentsOmron Zettler
(cont.)G8N AZ989G8P AZ2110/
AZ2111/AZ2150/AZ2151
G8W AZ986LC AZ942/AZ943/
AZ9431LY AZ164/AZ165/
AZ166MHS AZ420/AZ421/
AZ428/AZ429MHQ AZ2428/
AZ2429
OEG ZettlerOUA/OUAT AZ951/AZ954X
OUAZ AZ951/AZ954XORZ AZ820/AZ8222ORZ AZ830/AZ832
OUDT/OUDTM AZ8/AZ8AOUDE AZ8/AZ8A
SRU/SRUT AZ942/AZ943/AZ9431
ORW AZ942/AZ943/AZ9431
ORA AZ991OMI/OMIH AZ692/AZ2692/
AZ697/AZ761OMI/OMIH AZ732/AZ2732/
AZ733/AZ743OSA AZ673/AZ734
SRET AZ164/AZ165/AZ166
SRW AZ943OZ AZ762
OZF AZ756OMIT AZ692/AZ2692/
AZ697/AZ761OJ/OJE AZ767/AZ770
PCD AZ948
Schrack ZettlerRP AZ692/AZ2692/
AZ697/AZ723/AZ732/AZ2732/AZ733/AZ743/AZ761/AZ763/AZ764
RS AZ8222RS AZ830/AZ832RS AZ830P/
AZ832PRT AZ743/AZ761/
AZ762RY AZ696/AZ6961/
AZ6962TD AZ2110/
AZ2111/AZ2150/AZ2151
TE AZ2100/AZ2280
TF AZ942/AZ943/AZ9431
TN AZ942/AZ943/AZ9431
TP AZ8/AZ8AZD AZ2110/
Schrack Zettler (cont.)AZ2111/AZ2150/AZ2151
ZF AZ942/AZ943/AZ9431
ZK AZ420/AZ421/AZ428/AZ429/AZ431/AZ439
ZL AZ420/AZ421/AZ428/AZ429/AZ431/AZ439
Song Chuan Zettler792 AZ973
792H AZ973793 AZ697/AZ733/
AZ755801H/A AZ943
812H AZ943812HM AZ943
821 AZ760822E AZ97011/
AZ9711832 AZ2110/
AZ2150833H AZ943
834 AZ766835 AZ767841 AZ2702842 AZ954Y
842A AZ954X845 AZ743/AZ761/
AZ762SCLB/SCLD AZ164/AZ165
SCLA AZ164/AZ165SCL/SCL-1 AZ164/AZ165
Taiko ZettlerTB1 AZ989
Teleme- canique Zettler
DR AZ8222DRS AZ830/AZ832T154 AZ420/AZ421/
AZ428/AZ429/AZ431/AZ439
T163 AZ420/AZ421/AZ428/AZ429/AZ431/AZ439
Texcell ZettlerCN AZ734
Tyco (P&B) ZettlerK10 AZ164/AZ165/
AZ166KUP AZKUP
PB AZ9621RKA/RKS AZ692/AZ2692/
AZ697/AZ725/AZ755/AZ761/AZ762
T75 6962PCD AZ9481
RKA/RKSAZ732/AZ2732/AZ733/AZ743
R10 AZ420/AZ421/
Tyco (P& B) Zettler (cont.)AZ428/AZ429/AZ431/AZ439
R10R AZ2428/AZ2429
RT AZ743/AZ761/AZ762
SSRT SGX-1505FBTB1 AZ989T70 AZ942/AZ943/
AZ9431T7C AZ942/AZ943/
AZ9431T7N AZ942/AZ943/
AZ9431T72 AZ942/AZ943/
AZ9431T72J/T72K/T72M AZ942A
T73 AZ8/AZ8AT75 AZ696T77 AZ767
T77V/T773 AZ770T81 AZ5X/AZ951/
AZ954XT82 AZ8222T83 AZ830/AZ832T84 AZ830 4-PoleT85 AZ8222T90 AZ2110/
AZ2111/AZ2150/AZ2151
T91 AZ2100/AZ2101/AZ2200
T9A AZ2100/AZ2150/AZ2270/AZ2280
T92 AZ2800/AZ2850
V23026 AZ956/AZ956PV23042 AZ832V23086 AZ989V23086 AZ987V23079 AZ833/AZ8461V23105 AZ8222V23106 AZ847/AZ850
VF4 AZ973/AZ974VF7 AZ983
VF28 AZ986VFM AZ988VKM AZ975/AZ976VKP AZ9701/
AZ9711VM AZ984
Point your browser to http://www.azettler.com
XIAMEN ZETTLER ELECTRONICS CO., Ltd.6/F Yingfeng BuildingNo. 48-50 Huli AvenueXiamen 361006, ChinaTel: 86-592-5654-798FAX: 86-592-5654-955E-Mail: [email protected]
ZETTLER ELECTRONICS (HK)LIMITEDRoom 211, Hewlett Centre52-54 Hoi Yuen RoadKwun Tong, Hong KongTel: 86-852-2375-1288FAX: 86-852-2375-7433E-Mail: [email protected]
ZETTLER ELECTRONICS GmbhGERMANYJunkersstrasse 3D-82178 PuchheimGermanyTel: 49-89-80097170FAX: 49-89-80097200E-mail: [email protected]
AMERICAN ZETTLER, INC.75 ColumbiaAliso Viejo, California 92656U.S.A.Tel: 949-831-5000FAX: 949-831-8642E-Mail: [email protected]
It is here that you will find:
Complete data sheets for all the relays you see in this selector guide. These data sheets are in Adobe Acrobat PDF format. Thismeans you can download and print at 600 dpi for crystal clear copy.
Autocad drawing files (in both Autocad and DXF format) of each relays footprint and terminal layout so you can simply drop thedrawing into your PCB layout drawing.
Downloadable UL Component Recognition Cards (yellow cards) for relays approved by UL.
Full up-to-date listing of all our Sales Representatives and Distributors and the ability to check distributor stock.
Forms for requesting catalogs, data sheets and application information as well as a sign-up form for American Zettlers e-mailnewsletter.
INTERNATIONAL OFFICES
Printed 6/06 - 2M
ZETTLER ELECTRONICS SHANGHAIRoom 2107, Xinda BuildingNo.322 Xianxia RoadShanghai, ChinaTel: 86-21-6278-5776FAX: 86-21-6278-5773E-mail: [email protected]