Remora Electrical Limited Mining... · Remora Electrical Ltd was established in 1973 to distribute cable glands, junction boxes & stopping plugs, reducers & adaptors. We are conveniently

Remo

ra El

ectr

ical L

imite

d

CableGland

Terminations

Remora Electrical Ltd was established in 1973 to distribute cable glands, junction boxes & stopping plugs, reducers & adaptors. We are conveniently located close to the M1 near Sheffield, we are the only distributor for CCG products for the mining industry.

Over the last decade we have grown our mining business with the help of the mines & OEMs both in the UK & Europe. We carry comprehensive stocks of ATEX approved mining products. We also stock a range of ATEX certified adaptor plates to enable the direct fitting of our glands into a range of Euro-pean manufactured motors & switchgear along with spigot adaptors.

We also supply a wide range of industrial products suitable for use in the mines - this catalogue is designed for the mining industry & shows the range of products we sell. This is not our full range – if your requirements do not appear in this mining catalogue – give our knowledgeable team a call they will be able to help.

All items from our UK stores are despatched overnight – for next day delivery saving you valuable time and money. If however we need to order on the factory our lead times are based on surprisingly short turn-around.

The factory in South Africa has a wealth of experience working closely within its own mining industry to develop cable glands which are designed and manufactured to withstand the robust environments of the mines.

The simplicity of the ‘Captive Components’ and ‘Built in Seals’ concepts means that no matter where in the world the products are being installed, the simplest of instructions will ensure that all parts have been correctly fitted.

All products are manufactured to ISO 90001-2000 underwritten by Underwriters List (USA). CCG have a ATEX certificate for Group I products ECS06ATEX2044. CCG glands are also approved for Group I applications in South Africa and China as well as for Group II mines in Australia.

Company

Introduction

Contents

Cable Gland Selection 1

Armortex Cable Gland 2

FLP Cable Gland 3

FLP-TR Cable Gland 4

FLP-HOSE Cable Gland 5

Barrier Tex A Cable Gland 6

Barrier Tex F Cable Gland 7

CROCLOCK CR-CB Cable Gland 8

CROCLOCK CR-UB Cable Gland 9

HAS Spigot Adaptor / Reducer 10

HAP1 Motor/Switchgear Reducer 11





Motor/Switchgear Salvage Plate 16

Cable Gland Reducers / Adaptors 17

A2 Industrial Cable Gland 18

CW Industrial Cable Gland 19

IP Plus Industrial Cable Gland 20

Utility Junction Box 21

Handifit Junction Box 22

Cable Gland Accessories 23

Notes Section 24

RemoraElectrical Ltd

Tel +44 (0) 1226 352 000 www.remora.net

Cable Gland Selection

1


We offer cable glands to cover the full range of cables including armoured and non-armoured and applications from general industrial use through increased saftey, flameproof and explosion proof. We have only listed the cable glands specifically designed for the mining applications, a full range is available on request.

Should your cable be filled, mining approved and substantially compact and circular, has extruded bedding and the fillers are non-hygroscopic you may utilise a flame-proof cable gland entry devices, incorporation a sealing ring greater than 20mm as per EN 50018 - 2000 Annex C.

The following cable glands can fulfill this requirement:-

Armoured Cables Non-armoured Cables

ARMORTEX

FLP

FLP-TR

FLP-HOSE

Armoured Cables Non-armoured Cables

BARRIER TEX A

CROCLOCK CR-C

BARRIER TEX F

CROCLOCK CR-U

If your cable does not meet the above specification then barrier type cable glands are available and provide a compound barrier seal around the conductor and an enviromental seal on the outer sheath:-


Do I Need A Barrier Gland ?

Electrical LtdRemoraElectrical Ltd

[email protected] Fax +44 (0)1226 360 510

Standards and CertificationsHazardous Area Classification SANS / SABS IEC Zone 1, 2, 21 and 22 Exd I/IIC, Exe I/IIC and DIP A21CENELEC / ATEX Category 2, Category 3, EExde IIC 2 GD EExd I M2EN50014:1997E DEMKO 01 ATEX 130325XEN50018:2000E EPSILON 06 ATEX 2044EN50019:2000EEN50281-1-1:1999EOperating Temperature -30 to 130 °CAlternative Certification Options Available:-

• South Africa • Chinese

Mining GlandsArmortex

The Armortex Gland is designed with the MAC Multi Armour Captive-Component, providing an armour clamp and earth bond for Steel wire, Braid, Tape & Pliable wire armoured cable. Designed for hazardous area EExde group I (mining) & group IIC (surface) applications suitable for both indoor & outdoor. Seals on both inner and outer sheaths, to IP66/67/68 when fitted with sealing gasket provided.

ARMORTEX EEx de I/IIC I M2 / II 2 GD Cable Gland

2

Gland Code

SizeEntry Thread Cable Details (diameter) Armour

Dia Min-Max

Max Length ‘E’

Hexagonal Details (max)

Metric / NPT ‘C’ ‘D’ Min-Max ‘A’ Max ‘B’ ‘Flats’ ‘Crns’

052200A 00 - M20ss M20 ½ 15 3.0 - 8.0 13.5 0.2-1.25 73 25 28

0522-0A 0 - M20s M20 ½ 15 8.0 - 11.5 16.0 0.2-1.25 73 25 28

052201A 1 - M20 M20 ½ ¾ 15 11.5 - 14.0 19.0 0.2-1.25 78 30 34

052202A 2 - M25 M25 ¾ 1” 15 14.0 - 20.5 26.5 0.2-1.6 85 40 45

052203A 3 - M32 M32 1” 1¼ 15 20.0 - 26.5 33.0 0.2-2.0 95 45 51

052204A 4 - M40 M40 1¼ 1½ 20 26.5 - 32.5 40.5 0.3-2.0 105 55 62

052255A 5 - M50s M50 1½ 2” 20 32.5 - 38.0 46.0 0.4-2.5 108 74 83

052205A 5 - M50 M50 1½ 2” 20 38.0 - 44.5 52.0 0.4-2.5 108 74 83

052265A 6 - M63s M63 2” 2½ 20 44.5 - 50.0 60.0 0.4-2.5 145 82 92

052206A 6 - M63 M63 2” 2½ 20 50.0 - 56.0 67.0 0.4-2.5 145 82 92

052207A 7 - M75 M75 2 ½ 20 56.0 - 65.0 78.0 0.4-2.5 158 96 108

Features and Benefits• Glands available in both brass self colour & brass nickel plated at no extra cost.• No need to change seals or reverse cones or cone rings to accommodate different types of armoured cable.• Captive cone and ring ensure no loose parts during assembly.• Extra long captive explosion proof seal ensures built in safety.• Armour clamp components can be inspected after installation.• Gland can be used on Exd enclosures greater than 2 litres volume. • Complete with orange thread cap / safety gauge for correct gland selection.

All dimensions are in mm

Technical DataType Gland Material Seal Material Cable Type Armour Clamping Sealing Area Accessories

ARMORTEXBrass (Self Colour & Nickel Plated)Thermoplastic ElastomerSteel Wire, Braid, Tape, Pliable Wire ArmourMulti Armour Cone and Cone RingInner and outer sheathSpigot flange adaptors, Motor/Switchgear adaptor plate, reducer/adaptor, lock nut, earth tag & shroud


Tel +44 (0) 1226 352 000

Features and Benefits• Glands available in both brass self colour & brass nickel plated at no extra cost.• Two part handling, freely rotating captive cone for earth continuity and armour clamping.• Factory fitted with a specially formulated elastomeric seal provides built-in safety.• Captive cone and ring ensure no loose parts during assembly.• Gland can be used on Exd enclosures greater than 2 litres volume. • Complete with orange thread cap / safety gauge for correct gland selection.

The FLP Gland is designed with the MAC Multi Armour Captive-Component, providing an armour clamp and earth bond for Steel wire, Braid, Tape & Pliable wire armoured cable. Designed for hazardous area EExde group I (mining) & group IIC (surface) applications suitable for indoor use. Seals on inner sheath only, to IP66/67/68 when fitted with sealing gasket provided.

FLP EEx de I/IIC I M2 / II 2 GD Cable Gland

3

Mining GlandsFLP

Gland Code

SizeEntry Thread Cable Details (diameter) Max Length

‘E’


Metric / NPT ‘C’ ‘D’ Min-Max ‘A’ Max ‘B’ ‘Flats’ ‘Crns’

052100A 00 - M20ss M20 ½ 15 3.0 - 8.0 16.0 46 25 28

0521-0A 0 - M20s M20 ½ 15 8.0 - 11.5 16.0 46 25 28

052101A 1 - M20 M20 ½ ¾ 15 11.5 - 14.0 19.0 48 30 34

052102A 2 - M25 M25 ¾ 1” 15 14.0 - 20.5 26.5 60 42 47

052103A 3 - M32 M32 1” 1¼ 15 20.0 - 26.5 33.0 76 47 53

052104A 4 - M40 M40 1¼ 1½ 20 26.5 - 32.5 40.5 84 60 68

052155A 5 - M50s M50 1½ 2” 20 32.5 - 38.0 46.0 90 74 83

052105A 5 - M50 M50 1½ 2” 20 38.0 - 44.5 52.0 90 74 83

052165A 6 - M63s M63 2” 2½ 20 44.5 - 50.0 60.0 96 85 96

052106A 6 - M63 M63 2” 2½ 20 50.0 - 56.0 67.0 96 85 96

052207A 7 - M75 M75 2½ 20 56.0 - 65.0 78.0 105 96 108All dimensions are in mm




FLPBrass (Self Colour & Nickel Plated)Thermoplastic ElastomerSteel Wire, Braid, Tape, Pliable Wire ArmourMulti Armour Cone and Cone RingInner sheathSpigot flange adaptors, Motor/Switchgear adaptor plate, reducer/adaptor, lock nut, earth tag & shroud

www.remora.net


[email protected] Fax +44 (0)1226 360 510 4

Mining GlandsFLP-TR

The FLP-TR Compression Gland is designed for use with unarmoured elastomeric and plastic cables where it is necessary to pro-vide an flameproof seal. Fitted with two specially formulated elastomeric seals. Inner seals on the cable sheath. Harder outer seal grips the cable, giving superior cable retention and IP rating. Seals on the cable outer sheath, to IP66/67/68 when fitted with sealing gasket provided.

FLP-TR EEx de I/IIC I M2 / II 2 GD Cable Gland

Gland Code

SizeEntry Thread Cable Details

(diameter)Min-Max ‘A’

Max Length ‘E’


Metric / NPT ‘C’ ‘D’ ‘Flats’ ‘Crns’

052400A 00 - M20ss M20 ½ 15 3.5 - 8.5 57 25 28

0524-0A 0 - M20s M20 ½ 15 8.0 - 11.5 57 25 28

052401A 1 - M20 M20 ½ ¾ 15 11.5 - 14.0 59 30 34

052402A 2 - M25 M25 ¾ 1” 15 14.0 - 20.5 71 42 47

052403A 3 - M32 M32 1” 1¼ 15 20.0 - 26.5 87 47 53

052404A 4 - M40 M40 1¼ 1½ 20 26.5 - 32.5 96 60 68

052455A 5 - M50s M50 1½ 2” 20 32.5 - 38.0 112 74 83

052405A 5 - M50 M50 1½ 2” 20 38.0 - 44.5 112 74 83

052465A 6 - M63s M63 2” 2½ 20 44.5 - 50.0 124 85 96

052406A 6 - M63 M63 2” 2½ 20 50.0 - 56.0 124 85 96

052407A 7 - M75 M75 2 ½ 20 56.0 - 65.0 134 96 108

Features and Benefits• Glands available in both brass self colour & brass nickel plated at no extra cost.• Fitted with specifically formulated captive elastomeric seals, built-in safety.• No loose parts that can get lost during assembly.• Provided with an extra hard gripper seal to grip cable.• Gland can be used on Exd enclosures greater than 2 litres volume. • Complete with orange thread cap / safety gauge for correct gland selection.


Technical DataType Gland Material Seal Material Cable Type Sealing Area Accessories



FLP-TRBrass (Self Colour & Nickel Plated)Thermoplastic ElastomerUnarmoured TRSOuter sheathSpigot flange adaptors, Motor/Switchgear adaptor plate, reducer/adaptor, lock nut, earth tag & shroud



Features and Benefits• Glands available in both brass self colour & brass nickel plated at no extra cost.• Factory fitted with a specially formulated elastomeric seal provides built-in safety.• Complete with spigot to attach a hose for cable protection.• Gland can be used on Exd enclosures greater than 2 litres volume. • Complete with orange thread cap / safety gauge for correct gland selection.

The FLP-HOSE Compression Gland is designed for use with unarmoured elastomeric and plastic cables where it is necessary to provide an flameproof seal. The male spigot allows protective hose to be secured at the back of the gland. Seals on the outer sheath of the cable, to IP66/67/68 when fitted with sealing gasket provided.

FLP-HOSE EEx de I/IIC I M2 / II 2 GD Cable Gland

Mining GlandsFLP-HOSE

Gland Code

SizeEntry Thread Cable Details

Min-Max ‘A’

To Suit Hose Size

‘B’


Metric / NPT ‘C’ ‘D’ ‘Flats’ ‘Crns’

0527-0A 0 - M20s M20 ½ 15 8.0 - 11.5 ½” - 13mm 25 28

052701A 1 - M20 M20 ½ ¾ 15 11.5 - 14.0 ¾” - 19mm 30 34

052702A 2 - M25 M25 ¾ 1” 15 14.0 - 20.5 1” - 25mm 42 47

052703A 3 - M32 M32 1” 1¼ 15 20.0 - 26.5 1¼” - 32mm 47 53

052704A 4 - M40 M40 1¼ 1½ 20 26.5 - 32.5 1½” - 38mm 60 68

052765A 5 - M50s M50 1½ 2 20 32.5 - 38.0 1¾” - 45mm 74 83

052705A 5 - M50 M50 1½ 2 20 38.0 - 44.5 2” - 50mm 74 83

052765A 6 - M63s M63 2 2½ 20 44.5 - 50.0 2¼” - 57mm 85 96

052706A 6 - M63 M63 2 2½ 20 50.0 - 56.0 2½” - 63mm 85 96

052707A 7 - M75 M75 2½ 3 20 56.0 - 68.0 3” - 76mm 96 108





FLP-HOSEBrass (Self Colour & Nickel Plated)Thermoplastic ElastomerUnarmoured TRSOuter sheathSpigot flange adaptors, Motor/Switchgear adaptor plate, reducer/adaptor, lock nut, earth tag & shroud



Standards and CertificationsHazardous Area Classification IEC Zone 1, 2, 21 and 22 Exd I/IIC, Exe I/IIC Extd, A21CENELEC / ATEX Category 2, Category 3, EExde IIC 2GD

EN60079-0:2006 SIRA 09ATEX1044XEN60079-1:2004 EN60079-7:2003EN61241-0:2006EN61241-1:2004

Operating Temperature -20 to 80 °C

6

Mining GlandsBarrier Tex A

The Barrier Tex A Gland is designed with the MAC Multi Armour Captive-Component, providing an armour clamp and earth bond for Steel wire, Braid, Tape & Pliable wire armoured cable. Providing a flameproof compound barrier seal over the inner cores of the cable, an outer IP seal over the outer sheath of the cable and an armour clamp by means of a cone and cone ring. Seals to IP66/68 when fitted with sealing gasket provided.

Barrier Tex A Exd I/IIC, Exe I/II, I M2/II 2GD, Ex tD Cable Gland

Gland Code

Size

Entry ThreadMinimum

Installation Torgue

Compound Seal RangeMinimumArmour

Wire

Hexagonal AcrossFlatsMetric / NPT

Max Dia Over

Cores

Max No of Cores

Overall Cable Dia (Min/Max)

052500A 00 - M20ss M20 ½ 25 9 6 8.0-13.5 0.9 24

0525-0A 0 - M20s M20 ½ 25 9 6 11.5-16.0 0.9 24

052501A 1 - M20 M20 ½ ¾ 28 11 10 14.5-21.0 0.9 24

052502A 2 - M25 M25 ¾ 1” 36 16 20 20.5-27.0 1.25 33

052503A 3 - M32 M32 1” 1¼ 44 22 40 26.5-33.5 1.25 47

052504A 4 - M40 M40 1¼ 1½ 52 27 60 33.0-43.0 1.6 58

052505A 5 - M50 M50 2” 65 37 80 42.5-52.5 2.0 63

052506A 6 - M63 M63 2½ 85 48 100 52.5-65.5 2.5 73

Features and Benefits• Glands available in both brass self colour & brass nickel plated at no extra cost.• No need to change seals or reverse cones or cone rings to accommodate different types of armoured cable.• Armour clamp components can be inspected after installation.• Gland can be used on Exd enclosures greater than 2 litres volume.



BARRIER TEX ABrass (Self Colour & Nickel Plated)Thermoplastic Elastomer (Outer Seal)Steel Wire, Braid, Tape, Pliable Wire ArmourMulti Armour Cone and Cone RingInner and outer sheathSpigot flange adaptors, Motor/Switchgear adaptor plate, reducer/adaptor, lock nut, earth tag & shroud


Tel +44 (0) 1226 352 000

BARRIER TEX FBrass (Self Colour & Nickel Plated)Thermoplastic Elastomer (Outer Seal)UnarmouredInner and outer sheathSpigot flange adaptors, Motor/Switchgear adaptor plate, reducer/adaptor, lock nut, earth tag & shroud

www.remora.net

The Barrier Tex F Gland is designed for use with unarmoured elastomeric and plastic cables where it is necessary to provide an flameproof seal. Barrier Tex F provides a flameproof compound barrier seal over the inner cores of the cable and an outer IP gripper seal. Harder outer seal grips the cable, giving superior cable retention and IP rating. Seals on the cable outer sheath, to IP66/68 when fitted with sealing gasket provided.

Features and Benefits• Glands available in both brass self colour & brass nickel plated at no extra cost.• No loose parts that can get lost during assembly.• Gland can be used on Exd enclosures greater than 2 litres volume. • Complete with orange thread cap / safety gauge for correct gland selection.

Barrier Tex F Exd I/IIC, Exe I/II, I M2/II 2GD, Ex tD Cable Gland

7

Mining GlandsBarrier Tex F

Gland Code

Size

Entry Thread Minimum Installation

Torgue

Compound Seal Range Hexagonal AcrossFlatsMetric NPT

Max Dia Over Cores

Max No. of Cores

Overall Cable Dia ( Min-Max)

052600A 00 - M20ss M20 ½ 35 8 6 5.0-8.0 25

0526-0A 0 - M20s M20 ½ 35 9 6 8.0-11.0 25

052601A 1 - M20 M20 ½ ¾ 50 11 10 11.0-15.5 28

052602A 2 - M25 M25 ¾ 1” 50 16 20 15.0-20.5 36

052603A 3 - M32 M32 1” 1¼ 70 22 40 20.0-26.5 44

052604A 4 - M40 M40 1¼ 1½ 87 27 60 26.0-34.5 52

052655A 5 - M50s M50 2” 110 35 80 32.5-38.0 65

052605A 5 - M50 M50 2” 110 37 80 38.0-44.5 65

052666A 6 - M63s M63 2½ 120 45 100 44.5-50.0 85

052606A 6 - M63 M63 2½ 120 48 100 50.0-56.0 85



Standards and CertificationsHazardous Area Classification IEC Zone 1, 2, 21 and 22 Exd I/IIC, Exe I/IIC Extd, A21CENELEC / ATEX Category 2, Category 3, EExde IIC 2 GD

EN60079-0:2006 SIRA 09ATEX1044XEN60079-1:2004 EN60079-7:2003EN61241-0:2006EN61241-1:2004

Operating Temperature -20 to 80 °C



Mining GlandsCROCLOCK CR-CB

The CROCLOCK CR-CB type gland provides a Flameproof EExd compound filled barrier, a seal on the outer sheath, a universal armour clamp for armoured, screened or braided cable and an entry thread seal. The armour clamp provides an eletrical bond between the cable armour, screen or braid and the gland. CROCLOCK CR-CB type glands maintain EExd Flameproof method of explosion protection; IP66, 68 to 100 meters and is deluge resistant.

CROCLOCK CR-CB Exd I/IIC, Exe II, I M2/II 2GD Cable Gland

Gland Code

Entry Thread Gland Seal Range

ArmourAcceptance

RangeMetric NPTEntry

Length

Cable Inner Sheath/Cores Cable Outer Sheath

Max No. Cores

Max Over

Cores

Max Inner

Sheath

Standard

Min Max

Reduced Bore

Min Max

CR-CB/16/M16 M16 ½ or ¾ 16 7 9.0 11.7 9.0 13.5 6.7 10.3 0.15 - 1.25

CR-CB/20S/M20 M20s ½ or ¾ 16 8 10.4 11.7 11.5 16.0 9.4 12.5 0.15 - 1.25

CR-CB/20/M20 M20 ½ or ¾ 16 14 12.5 14.0 15.5 21.1 12.0 17.6 0.15 - 1.25

CR-CB/25/M25 M25 ¾ or 1 16 25 17.8 20.0 20.3 27.4 16.8 23.9 0.15 - 1.60

CR-CB/32/M32 M32 1 or 1¼ 16 50 23.5 26.3 26.7 34.0 23.2 30.5 0.15 - 2.00

CR-CB/40/M40 M40 1¼ or 1½ 16 80 28.8 32.2 33.0 40.6 28.6 36.2 0.20 - 2.00

CR-CB/50S/M50 M50s 2 16 100 34.2 38.2 39.4 46.7 34.8 42.4 0.20 - 2.50

CR-CB/50/M50 M50 2 16 100 39.4 44.1 45.7 53.2 41.1 48.5 0.20 - 2.50

CR-CB/63S/M63 M63s 2½ 19 120 44.8 50.1 52.1 59.5 47.5 54.8 0.30 - 2.50

CR-CB/63/M63 M63 2½ 19 120 50.0 56.0 58.4 65.8 53.8 61.2 0.30 - 2.50

CR-CB/75S/M75 M75s 3 19 140 55.4 62.0 64.8 72.2 60.2 68.0 0.30 - 2.50

CR-CB/75/M75 M75 3 19 140 60.8 68.0 71.1 78.0 66.5 73.4 0.30 - 2.50

CR-CB/80/M80 M80 3 or 3½ 25 160 64.4 72.0 77.0 84.0 - - 0.45 - 3.15

CR-CB/85/M85 M85 3 or 3½ 25 180 69.8 78.0 79.6 90.0 75.0 85.4 0.45 - 3.15

CR-CB/90/M90 M90 3½ or 4 25 200 75.1 84.0 88.0 96.0 - - 0.45 - 3.15

CR-CB/100/M100 M100 3½ or 4 25 220 80.5 90.0 92.0 102.0 87.4 97.4 0.45 - 3.15

Features and Benefits• Glands available in both brass self colour & brass nickel plated.• Gland can be used on Exd enclosures greater than 2 liters volume.


Standards and CertificationsHazardous Area Classification SIRA 03ATEX1479X Gas Group I, IIC, IIB, IIACENELEC / ATEX Mining equipment Group I M2EN50014:1998 Enclosure Volume - Any EN50018:2000 Internal Ignition Source - YesEN50281-1-1:1999E Zone 1 or 2, 21 & 22IEC 60079-0 (2006-06) IEC 60079-1 (2001-02)Operating Temperature -60 to 85 °CAlternative Certification Options Available:-

• Gost • CSA • IECEx

CROCLOCK CR-CBBrass (Self Colour & Nickel Plated)LSOH SiliconeSteel Wire, Braid, Tape, Pliable Wire ArmourInner and outer sheathSpigot flange adaptors, Motor/Switchgear adaptor plate, reducer/adaptor, lock nut, earth tag & shroud



Tel +44 (0) 1226 352 000

Standards and CertificationsHazardous Area Classification SIRA 03ATEX1479X Gas Group I, IIC, IIB, IIACENELEC / ATEX Mining equipment Group I M2EN50014:1998 Enclosure Volume - Any EN50018:2000 Zone 1 or 2, 21 & 22EN50281-1-1:1999EIEC 60079-0 (2006-06) IEC 60079-1 (2001-02)Operating Temperature -60 to 85 °CAlternative Certification Options Available:-

• Gost • CSA • IECEx

www.remora.net

Gland Code

Entry Thread Gland Seal Range

Metric NPT ‘C’Entry

Length

Cable Inner Sheath/Cores Cable Outer Sheath

Max No. Cores

Max Over Cores

Max Inner Sheath

Standard

Min Max

CR-UB/16/M16 M16 ½ or ¾ 16 7 8.4 8.4 3.4 8.4

CR-UB/20S/M20 M20s ½ or ¾ 16 8 10.4 11.7 4.8 11.7

CR-UB/20/M20 M20 ½ or ¾ 16 14 12.5 14.0 9.5 14.0

CR-UB/25/M25 M25 ¾ or 1 16 25 17.8 20.0 11.7 20.0

CR-UB/32/M32 M32 1 or 1¼ 16 50 23.5 26.3 18.1 26.3

CR-UB/40/M40 M40 1¼ or 1½ 16 80 28.8 32.2 22.6 32.2

CR-UB/50S/M50 M50s 2 16 100 34.2 38.2 28.2 38.2

CR-UB/50/M50 M50 2 16 100 39.4 44.1 33.1 33.1

CR-UB/63S/M63 M63s 2½ 19 120 44.8 50.1 39.3 50.1

CR-UB/63/M63 M63 2½ 19 120 50.0 56.0 46.7 56.0

CR-UB/75S/M75 M75s 3 19 140 55.4 62.0 52.3 62.0

CR-UB/75/M75 M75 3 19 140 60.8 68.0 58.0 68.0

CR-UB/80/M80 M80 3 or 3½ 25 160 64.4 72.0 61.9 72.0

CR-UB/85/M85 M85 3 or 3½ 25 180 69.8 78.0 69.1 78.0

CR-UB/90/M90 M90 3½ or 4 25 200 75.1 84.0 74.1 84.0

CR-UB/100/M100 M100 3½ or 4 25 220 80.5 90.0 81.8 90.0

Features and Benefits• Glands available in both brass self colour & brass nickel plated.• Gland can be used on Exd enclosures greater than 2 liters volume.


CROCLOCK CR-UBBrass (Self Colour & Nickel Plated)LSOH SiliconeUnarmouredInner and outer sheathSpigot flange adaptors, Motor/Switchgear adaptor plate, reducer/adaptor, lock nut, earth tag & shroud


The CROCLOCK CR-UB type gland provides a Flameproof EExd compound filled barrier, a secondary weather seal on the outer sheath and an entry thread seal. CROCLOCK CR-UB type glands maintain Flameproof EExd integrity on unarmoured cable types and IP protection to IP66, 68 to 100 meters and is deluge resistant.

CROCLOCK CR-UB Exd I/IIC, Exe II, I M2/II 2GD Cable Gland

9

Mining GlandsCROCLOCK CR-UB



Spigot Adaptor/Reducers HAS

The HAS Type Spigot Adaptor/Reducers are intended for mounting to flameproof enclosure without compromising the explosion protection provided by the enclosure, in accordance with relevant codes of practice. The enclosure has minimum spigot bore length of 12.5mm. The Adaptor/Reducers are designed to convert the aperture of the associated enclosure into a metric female thread form. The Adaptor consists of an elliptical metallic plate that has a female metric thread form at one end for the connection of Group 1 certified cable glands, at the other end there is a turned cylindrical spigot for insertion into the associated equipment spigot bore. The elliptical portion of the Adaptor has two, counter bored fixing holes for use with cap head screws to secure the Adaptor to the enclosure. Armortex, FLP, FLP-TR & FLP Hose range of cable glands can be used in conjunction with the HAS Adaptor/Reducers.

SPIGOT HAS IM2 Ex d I/II 2G Ex d IIB Adaptor/Reducers

Spigot Code

Dimension Metric Thread Sizes Available ‘*’Fixing Size‘A’ Spigot

Size‘B’ ‘C’ M20 M25 M32 M40 M50 M63

HAS0 / * 19.05 14.0 44.5 Y - - - - - M6

HAS1 / * 25.4 20.0 57.15 Y Y Y - - - M6

HAS2 / * 31.75 26.3 69.85 Y Y Y - - - M8

HAS3 / * 38.1 32.2 82.55 Y Y Y Y - - M8

HAS4 / * 50.8 44.1 95.25 Y Y Y Y Y - M10

HAS5 / * 63.5 56.0 114.3 Y Y Y Y Y Y M10


Technical DataType Material

Standards and CertificationsHazardous Area Classification CE IM2 Ex d I / II 2G Ex d IIB

Sira 06ATEX1149U

HASBrass Bright Zinc plated Gold Passivation.

Note: * is replaced by the applicable spigot & required thread size: e.g. HAS1 / 25.4 / M32

The HAS Spigot Adaptors are available without thread entries, thus becoming blanking devices, the thread size ‘*’ is just omitted from the part code. e.g. HAS1 / 25.4



The HAP Reducer Plate is intended for mounting to a flameproof enclosure without compromising the explosion protection provided by the motor/switchgear/enclosure. The HAP Reducer is used to convert an existing cable entry aperture of the associated enclosure into a metric female thread form. The Reducer comprises a rectangular metallic plate with four, counter-bored, fixing holes for used with cap head screws. One recessed or fully threaded bore for the connection of a suitable certified cable gland is centrally located. Armortex, FLP, FLP-TR & FLP Hose range of cable glands can be used in conjunction with the HAP Reducer Plate.

Plate CodeDimension Metric Thread Sizes Available ‘*’ Fixing

Size‘A’ ‘B’ ‘C’ ‘D’ M25 M32

HAP1 / * 62 100 32 70 Y Y - - - - M6

Reducer Plate HAP1 IM2 Ex d I/II 2G Ex d IIB

Motor/SwitchgearReducer Plate HAP1


HAP1Mild Steel Bright Zinc plated Gold Passivation.


11

Note: * is replaced by the applicable thread size: e.g. HAP1 / M32

The HAP Reducers are available without thread female entries, thus becoming blanking

devices, the thread size ‘*’ is just omitted from the part code.


Sira 06ATEX1149U



The HAP Reducer Plate is intended for mounting to a flameproof enclosure without compromising the explosion protection provided by the motor/switchgear/enclosure. The HAP Reducer is used to convert an existing cable entry aperture of the associated enclosure into a metric female thread form. The Reducer comprises a rectangular metallic plate with four, counter-bored, fixing holes for used with cap head screws. One recessed or fully threaded bore for the connection of a suitable certified cable gland is centrally located. Armortex, FLP, FLP-TR & FLP Hose range of cable glands can be used in conjunction with the HAP Reducer Plate.




12

Motor/Switchgear Reducer Plate HAP2






Size‘A’ ‘B’ ‘C’ ‘D’ M25 M32 M40 M50 M63 M75

HAP2 / * 95 142 65 112 Y Y Y Y Y Y M8


Sira 06ATEX1149U






13

The HAP Reducer Plate is intended for mounting to a flameproof enclosure without compromising the explosion protection provided by the motor/switchgear/enclosure. The HAP Reducer is used to convert an existing cable entry aperture of the associated enclosure into a metric female thread form. The Reducer comprises a rectangular metallic plate with four, counter-bored, fixing holes for used with cap head screws. One recessed or fully threaded bore for the connection of a suitable certified cable gland is centrally located.Armortex, FLP, FLP-TR & FLP Hose range of cable glands can be used in conjunction with the HAP Reducer Plate.







Size‘A’ ‘B’ ‘C’ ‘D’ M25 M32 M40 M50 M63 M75

HAP3 / * 120 147 85 112 Y Y Y Y Y Y M10


Sira 06ATEX1149U






14








Size‘A’ ‘B’ ‘C’ ‘D’ M25 M32 M40 M50 M63 M75

HAP4 / * 100 100 57 76 Y Y Y Y Y - M10


Sira 06ATEX1149U






15








Size‘A’ ‘B’ ‘C’ ‘D’ M25 M32 M40 M50 M63 M75 M80 M85

HAP5 / * 118 168 83 133 Y Y Y Y Y Y Y Y M12


Sira 06ATEX1149U



Plate CodeDimension Fixing

Size‘A’ ‘B’ ‘C’ ‘D’

MSP1 62 100 32 70 M6

MSP2 95 142 65 112 M8

MSP3 120 147 85 112 M10

MSP4 100 100 57 76 M10

MSP5 118 168 83 133 M12

16

Motor/Switchgear Salvage Plate

The HAP Salvage Plate is designed for the protection of motors and switchgear in storage, transite or salvage operations. The plate is fitted using the supplied silicone protection lubricant and uses the original cable entry fixing studs. the fitting of the plate offers protection to the flameproof surfaces and provents ingress of dust and water to the equipment.

Salvage Plate MSP NON-FLP



MSPNylon 6

Standards and Certifications

For industrial None-FLP use only



ThreadMale Female

Male Thread Length

ReducerCode

ThreadMale Female

Male Thread Length

AdaptorCode

M20 M16 15 RM20M16E-UN M16 M20 15 AM16M20E-UN







M50 M20 15 RM50M20E-UN

M50 M25 15 RM50M25E-UN

M50 M32 15 RM50M32E-UN

M50 M40 15 RM50M40E-UN

M63 M32 15 RM63M32E-UN

M63 M40 15 RM63M40E-UN

M63 M50 15 RM63M50E-UN

M75 M63 15 RM75M63E-UN

Reducers/Adaptors & Stopping Plugs

Metric Reducers & Adaptors are designed to effectively reduce or adapt dissimilar thread sizes. Manufactured from high quality brass, suitable for Zone 1 & 2 Hazardous area installations EExde Group I (mining) & Group II (surface).High IP protection obtained to IP66/67/68 when fitted with sealing gasket provided.

Metric-Metric Reducers/Adaptors & Stopping Plugs EExde I/IIC

Standards and CertificationsHazardous Area Classification SANS / SABS IEC Zone 1, 2, 21 and 22 Exd I/IIC, Exe I/IIC and DIPCENELEC / ATEX Category 2, Category 3, EExde IIC 2 GD I M2EN50014:1997E DEMKO 01 ATEX 130325XEN50018:2000E EPSILON 06 ATEX 2044EN50019:2000EEN50281-1-1:1999E

Alternative Certification Options Available:-


Reducer Adaptor

ThreadSize

Male Thread Length

Stopper Code

M16 15 353016-UN

M20 15 353020-UN

M25 15 353025-UN

M32 15 353032-UN

M40 15 353040-UN

M50 15 353050-UN

M63 15 353063-UN

M75 15 353075-UN

Stopping Plug


17



Gland Code


‘C’


Diameter ‘N’ Length ‘D’ Min-Max ‘A’ ‘Flats’ ‘Crns’

053500 00 - M20ss M20 10 3.0 - 8.0 20 24 27

0535-0 0 - M20s M20 10 7.0 - 11.0 20 24 27

053501 1 - M20 M20 10 11.0 - 15.5 24 27 31

053502 2 - M25 M25 10 15.0 - 20.5 25 35 40

053503 3 - M32 M32 10 20.0 - 26.5 30 42 48

053504 4 - M40 M40 10 26.0 - 34.5 30 52 60

053505 5 - M50 M50 10 34.0 - 44.5 42 65 75

053506 6 - M63 M63 10 44.0 - 57.0 48 82 94

053507 7 - M75 M75 20 56.0 - 68.0 55 96 110

053508 8 - M80 M80 20 65.0 - 74.0 55 96 110

053509 9 - M90 M90 20 73.0 - 82.0 60 110 125

053510 10 - M100 M100 20 81.0 - 92.0 70 * *

053511 11 - M110 M110 20 91.0 - 102.0 70 * *

053512 12 - M120 M120 20 102.0 - 110.0 * * *

053513 13 - M130 M130 20 110.0 - 120.0 * * *

Industrial Glands A2

Features and Benefits• For indoor / outdoor use.• Seals on cable sheath to IP68.• Wide sealing range.• Precision manufactured from high quality Nickel plated brass.

A2 Compression Cable Gland

Technical DataType Gland Material Seal Material

Cable Type Sealing Area Accessories


BS6121 Part 1 1989 SGS 1542\97153SANS / SABS 1213 787\80054\D586 IP Protection IP66/68

EN50014:1997E -30 °C to +130 °C

A2Brass (Nickel Plated)Thermoplastic Elastomer (Silicone on request)UnarmouredOuter sheathReducer/adaptor, lock nut & shroud

The A2 Compression Gland is designed for use with unarmoured, elastomeric and plastic cable for both indoor & out-door applications. Seals on the cable sheath, to IP68 if fitted with a sealing gasket.


Note: Sizes M110 to M130 are of round slotted material, for use with ‘C’ spanner. Please contact us for dimentions



Gland Code


‘E’


Diameter ‘N’ Length ‘D’ Min-Max ‘A’ Min-Max ‘B’ ‘Flats’ ‘Crns’

051200 00 - M20ss M20 10 3.0 - 8.0 8.0 - 13.5 41 24 27

0512-0 0 - M20s M20 10 8.0 - 12.0 11.5 - 16.0 43 24 27

051201 1 - M20 M20 10 11.0 - 15.5 14.5 - 21.0 47 27 31

051202 2 - M25 M25 10 15.0 - 20.5 20.5 - 27.0 56 35 40

051203 3 - M32 M32 10 20.0 - 26.5 26.5 - 33.5 57 42 48

051204 4 - M40 M40 15 26.0 - 34.5 33.0 - 43.0 68 52 60

051205 5 - M50 M50 15 34.0 - 44.5 42.5 - 52.5 72 65 75

051206 6 - M63 M63 15 44.0 - 57.0 52.0 - 65.5 89 80 90

051207 7 - M75 M75 15 56.0 - 68.0 65.0 - 78.0 97 96 110

051208 8 - M80 M80 20 68.0 - 74.0 77.5 - 82.0 98 100 115

051209 9 - M90 M90 20 74.0 - 82.0 81.0 - 91.0 123 110 125

051210 10 - M100 M100 20 82.0 - 93.0 90.0 - 101.0 * * *

Industrial GlandsCW

The CW Gland is designed for Steel Wire Armoured cables for general indoor/outdoor use where a seal on the outer sheath is required to obtain an IP rating. The gland features two piece handling, no loose parts & freely rotating captive cone, providing an armour clamp and earth bond without twisting the steel wire armouring. Seals on the cable sheath, to IP66 if fitted with a sealing gasket.

CW Captive Cone Gland

Features and Benefits• For outdoor use.• No loose parts that can get lost during assembly.• Freely rotating captive cone, providing an armour clamp and earth bond without twisting the steel wire armouring.• Provides a seal on the outer sheath of the cable to IP66.• Precision manufactured from high quality Nickel plated brass.


Technical DataType Gland Material Seal Material Cable TypeArmour Clamping Sealing Area Accessories


BS6121 Part 1 1989 SGS 3641\99369SANS / SABS 1213 787\K757 IP Protection IP66

EN50014:1997E -30 °C to +130 °C

CWBrass (Nickel Plated)Thermoplastic ElastomerSteel Wire Armour / Aluminium ArmourCaptive Rotating ConeOuter sheathReducer/adaptor, lock nut, earth tag & shroud

Note: Sizes M100 and above are of round slotted material, for use with ‘C’ spanner. Please contact us for dimentions

19



BW Corrosion GuardBrass (Nickel Plated)Glass Reinforced Polyester Compound / PBTThermoplastic ElastomerSteel Wire ArmourOuter sheath and total enclosure of glandReducer/adaptor, lock nut & earth tag.

Industrial GlandsIP Corrosion Guard

Features and Benefits• For use in highly corrosive or wet locations.• Specially formulated IP Plus seals, seals on inner sheath of the cable.• The screw-on Corrosion Guard is manufactured from non-corrosion material to protect the steel wire armour and metal part of the gland.• Corrosion Guard screws onto the gland body and seals over the outer sheath of the cable giving an IP 66/67/68 seal.• Wide sealing range.• Precision manufactured from high quality Nickel plated brass & non-corrosive Glass Reinforced Polyester Compound corrosion guard.

IP Plus Corrosion Guard Cable Gland

Technical DataType Gland MaterialCorrosion Guard

Seal Material Cable Type Sealing Area Accessories


BS6121 Part 1 1989 SGS 3641\99367SANS / SABS 1213 787\85772K756 IP Protection IP66/68

EN50014:1997E -30 °C to +130 °C

The IP Plus Corrosion Guard Gland is designed for use with Steel Wire Armoured (SWA) cable. It provides an IP68 moisture proof seal on the outer sheath of the cable making the gland suitable for use in highly corrosive and wet loca-tions. The screw-on Corrosion Guard is manufactured from non-corrosive material to protect the steel wire armour and metal parts of the gland.


Gland Code


‘E’Maximum

Diameter ‘F’Diameter ‘N’ Length ‘D’ Min-Max ‘A’ Min-Max ‘B’

054600 00 - M20ss M20 10 3.0 - 8.0 8.0 - 13.5 53 35

0546-0 0 - M20s M20 10 7.0 - 12.0 11.5 - 16.0 53 35

054601 1 - M20 M20 10 9.0 - 15.5 14.5 - 21.0 56 36

054602 2 - M25 M25 10 14.0 - 20.5 20.5 - 27.0 60 46

054603 3 - M32 M32 10 19.0 - 26.5 26.5 - 33.5 66 53

054604 4 - M40 M40 15 26.0 - 34.5 33.0 - 43.0 78 68

054605 5 - M50 M50 15 34.0 - 44.5 42.5 - 52.5 87 84

054606 6 - M63 M63 15 44.0 - 57.0 52.0 - 65.5 110 110

054607 7 - M75 M75 15 56.0 - 68.0 65.0 - 78.0 118 124

20



The Utility Box is a general purpose junction box suitable for all surface applications. It is manufactured from impact, corrosion and UV resistant glass reinforced polyester compound and provides 1,2,3 or 4 way versatility. Srew on lid provides ease of installation and when locked with the special locking key prvents unauthories tampering.

Utility Box IP68


Box Code Gland SizeEntry Thread

‘A’Clear Inside Height ‘B’

Clear Inside Distance ‘C’

Distance of Fix-ing Holes ‘D’

Earth Rail Fixing Holes ‘E’

102101 1 - M20 M20x1.5 49 80 122 75

102102 2 - M25 M25x1.5 53 110 158 86

4 W

AY

Material: UV Resistant Glass Reinforced Polyester CompoundIP Ratings: IP66/67/68Standard: SABS 2333 / IEC 600529

21

Junction Boxes

Features and Benefits• Connection box for industrial applications.• Manufactured from impact corrosion and UV resistant glass reinforced polyester compound.• Screw on lid provides ease of installation locked with a special locking key prevents unauthorised tampering and ease of installation.• No exposed metal parts.• Dust and water proof to IP68.• One box offers 1, 2, 3 or 4 way versatility• 4 blanking plugs provided.• No drilling or tapping of cable entries required.• Internal earth continuity ring and earth stud provided.• Mounting studs provided for DIN rail if using terminal blocks.

Junction Box Accessories Terminal assemblies are available supplied & fitted ready for installation. Full terminal option list is available on request.

Anti-tamper special locking key - prevents unauthorised entry



Junction Boxes






0650-0 0 - M20s M20x1.5 52 71 77 65

065001 1 - M20 M20x1.5 58 89 90 80

065002 2 - M25 M25x1.5 67 107 107 98

065003 3 - M32 M32x1.5 105 165 167 140

4 W

AY






0651-0 0 - M20s M20x1.5 52 61 107 65

065101 1 - M20 M20x1.5 58 81 127 80

065102 2 - M25 M25x1.5 67 91 150 98

065103 3 - M32 M32x1.5 105 152 235 140

Y B

OX

Material: UV Resistant Glass Reinforced Polyester CompoundIP Ratings: IP66/67/68Standard: SABS 2333 / IEC 600529


22

Handi-Fit Box IP68

The Handifit Box is a general purpose junction box suitable for all surface applications. It is manufactured from impact, corrosion and UV resistant glass reinforced polyester compound and provides 1,2,3 or 4 way versatility. Srew on lid provides ease of installation and when locked with the special locking key prvents unauthories tampering.

Features and Benefits• Connection box for industrial applications.• Manufactured from impact corrosion and UV resistant glass reinforced polyester compound.• Screw on lid provides ease of installation locked with a special locking key prevents unauthorised tampering and ease of installation.• No exposed metal parts.• Dust and water proof to IP68.• One box offers 1, 2, 3 or 4 way versatility• 4 blanking plugs provided.• No drilling or tapping of cable entries required.• Internal earth continuity ring and earth stud provided.• Mounting studs provided for DIN rail if using terminal blocks.


Tel +44 (0) 1226 352 000 www.remora.net23

SizeNickel Plated

CodeUnplated

Code

16 - M16 BLN16 UBLN16

1 - M20 BLN1 UBLN1

2 - M25 BLN2 UBLN2

3 - M32 BLN3 UBLN3

4 - M40 BLN4 UBLN4

5 - M50 BLN5 UBLN5

6 - M63 BLN6 UBLN6

7- M75 BLN7 UBLN7

SizeNickel Plated

CodeUnplated

Code

16 - M16 NPET16 ET16

1 - M20 NPET1 ET1

2 - M25 NPET2 ET2

3 - M32 NPET3 ET3

4 - M40 NPET4 ET4

5 - M50 NPET5 ET5

6 - M63 NPET6 ET6

7- M75 NPET7 ET7

Size Washer Code

16 - M16 805516

1 - M20 805520

2 - M25 805525

3 - M32 805532

4 - M40 805540

5 - M50 805550

6 - M63 805563

7- M75 805575

Size Washer Code

16 - M16 M16WSER

1 - M20 M20WSER

2 - M25 M25WSER

3 - M32 M32WSER

4 - M40 M40WSER

5 - M50 M50WSER

6 - M63 M63WSER

7- M75 M75WSER

Size Shroud Code

0 - M20s (Long Body) SR0

0 - M20s (Short Body) SF0

1 - M20 SF1

2 - M25 SF2

3 - M32 SF3

4 - M40 SF4

5 - M50 SF5

6 - M63 SF6

7- M75 SF7

Plastic Sealing Washers Serrated Washers BZP

Brass Lock Nuts Brass Earth Tags

Cable Gland Accessories

PVC Gland Shrouds Gland Spanners

Size Shroud Code

0 - M20s SPANNER-20S

1 - M20 SPANNER-20

2 - M25 SPANNER-25

3 - M32 SPANNER-32

4 - M40 SPANNER-40

5 - M50 SPANNER-50

6 - M63 SPANNER-63

7- M75 SPANNER-75

Electrical Ltd

Fax +44 (0)1226 360 510


Notes

[email protected] 24

Unit 8a Shortwood Business Park Hoyland S74 9LH

Tel: +44 (0) 1226 352 000Fax: +44 (0) 1226 360 510

email: [email protected] NO: MC#0.16

Documents

Remora Electrical Limited Mining... · Remora Electrical Ltd was established in 1973 to distribute cable glands, junction boxes & stopping plugs, reducers & adaptors. We are conveniently