Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
You will need:
General workshop tools
Sponge
Glue provided
REPLACEMENT SEAT
COVER KIT (TD5
ONLY) ILLUSTRATED FITTING MANUAL
2
Thank you for purchasing the Replacement Seat Cover Kit. Please read these
instructions carefully before commencing work.
You can fit Masai Seat Covers to your Defender in just a few hours.
Before commencing, remove the old seat covers carefully without damaging the
foam material from the seats. Do not remove headrest covers! Try the new
seat covers on to your seats to ensure that you are happy with the shape and
fit. Turn the seat covers inside out and prepare to begin fitting.
REPLACEMENT SEAT
COVER KIT
Your kit includes:
Appropriate seat covers
Adhesive
3
1. Apply the glue at the whole length of the
existing green strips on the back of the seat
covers.
2. Leave to dry, at least 80% dry when the
glue will not stick to your hand when
touched.
5. Wrap the seat cover onto the car seat.
Press on to the glue applied area to ensure a
firm bonding and the shape would be formed
nicely.
6. Repeat the steps on the lower car seat
portion and headrest. Note that it is not nec-
essary to remove the existing cover from the
headrest before applying your new one.
3. Apply the glue on the foam of the seat
area, which is to be attached to the green
strips on the seat covers. Leave to dry as per
the seat cover portion.
4. When glue on both surfaces does not feel
sticky, carefully line both portions together as
accurately as possible and attach. The adhe-
sion should now be firm by now.
Customer Feedback
Your feedback is very important to us.
We would love to hear any suggestions or recommendations you may
have about the Masai product range. If you have any feedback you think
may help us improve the services or products we offer, then please use
the details found at the bottom of this page to contact us.
Thank you for choosing Masai.