7/28/2019 Reqd Data - Bridge Load Tests

1/1

9948 - Deign Department

STANDARD LIST OF DATA REQUIRED FOR DESIGNS

Unit to be Designed :- Load Test on the Bridge Girder

Required data :-

1) Pier Numbers between which span is to be tested : (exact location)Relevant Drawing Numbers (for super / sub structure) :

Relevant Design document (for super / sub structure) :

Name of the Designer (Consultant) :

Name of the Proof checking Agency :

2) Details of Bridge Super Structure : Span of Girder m (C/C of bearings)

Distance between piers m (C/C span 'L' )

Number of Lanes m

Width of Deck m

Depth of Girder m

Camber / Gradient (if any)

Cross section Type (Box, 'I', Voided, Slab)

Type of Loads (Rail / Road)

Steel / RCC / PSC

Age of Girder to be tested (New / Old)

3) Load-Test Set up :- Governing Load case Nos.

Loading by Static Platform - or - Trucks

Make and Dimensions of Truck planned (including Axel Loads) (Empty & Full)

Method Statement of Loading / Unloading

Method of Calibration / Agency to estimate deflection

4) Safe Bearing Capacity of the Soil - : T/sqm

Depth at which SBC is available below Ground level m

Depth of Ground water Table below FGL. m

5) Site Conditions - Type of Service below the Deck (Rail / Road / Water etc.)

Depth of Water, velocity etc. (if any) m

Clear Height available below soffit m (to estimate staging)

6) Material Availability : New

Old / available (Give Details)

7) Any relevant Information available :

8) Design / Details Required by what date :

L

Depth of Water

(If Any)

W

D

H

Typical Elevation Schematic Section

Provide more details if

available;

or any contractual

specifications related to

load-test etc.