Upload
zankar-parikh
View
221
Download
0
Embed Size (px)
Citation preview
7/29/2019 Requriements of Tender
1/6
Standard
BS
Construction1
The cable shall be of the supporllng core system and the supporting core shall b
The three phase conductors shall be of hard drawn stranded compacted alumini
Dl2281 and Dl2282 95mm2
Dl2284 and Dl2285 50mm2
The neutral conductor shall be of aluminium alloy of 54,6 mm2 cross-sectional a
In 5 core cables, tile street lighting ccnductor shall be of hard draw:) stranded c
2
The colours shall be as follows:
2 core cable:
3 core cable:
4 core cable:
Triplex cable:
INSULATION
The cable shall be suitable for operation with a voltage of 1000 V between phasThe insulation shall be of XLPE, black carbon stablished for UV protection.
The neutral conductor shall be identified by one longitudinal rim 0.5 mm x 1.0
TESTS
The cable shall be tested in accordance with E-2 of SASS 1418: Part II for installa
The cable shall be tested in accordance with E-3 of SASS 1418 Part II for installa
Records of routine tests shall be provided by the manufacturer.
DELIVERY
The maximum drum size shall be 2500 diameter, 1500 width.
The maximum weight of cable and drum shall be 5000 kg.
delivery of the items to commence within four (4) weeks after release of a Purchase with thmaximum dimension of cable drums shall be:
2500 mm diameter
1500 mm width
5000 kg weight
Triplex cable shall be supplied 500 m lengths unless otherwise specified.
The outer sheath shall be embossed and or printed with the Power project Logo
INFORMATION TO BE SUBMITTED WITH Tender
Cables shall be stranded copper conductor, of appropriate cross sectional area.
mm2 earth continuity conductor. Insulation shall be 600/1000 V general-purposinsulation and a colour stripe is not adequate.
Underground cables shall be steel wire armoured, bedded and served with blackthe earth conductor between the insulated cores. The PVC outer sheath shall be
7/29/2019 Requriements of Tender
2/6
Outlined drawing
Type tests certificate
Routine tests results to be supplied during delivery showing compliance with ap
Where an equivalent standard(s) is used, a copy of that standard(s) shall be sub
A Sample shall be supplied for inspection before the delivery of the first batch
For first time suppliers to power Corporation, Factory acceptance tests and insp
tests shall be witnessed by the purchaser or by his appointed representative. Norepresentative. No additional charge shall be levied for such tests
7/29/2019 Requriements of Tender
3/6
e the neutral conductor.
m of crosssectional area
rea.
mpacted aluminium of cross-sectional area 25 mm2
s and 600V between phase and an earthed neutral.
m along the surface of the insulation. The phase conductors shall be clearly marked by in
tion under bare overhead high voltage conductors.
ion in locations with a high incidence of lighting.
last delivery made two weeks after commencement of delivery
at intervals of 500mm throughout the length of the cable
he cores of triplex cable shall be 16 mm2 cross section with a 10
grades. Core identification shall be by solid colouring of the
PVC. The cores of triplex cable shall be laid in a flat plane withUV stabilised.
7/29/2019 Requriements of Tender
4/6
ropriate IEC, BS, SABS or equivalent standard
mitted with the tender document
ctions are required before the delivery of the first batch. These
additional charge witnessed by the purchaser or by his appointed
7/29/2019 Requriements of Tender
5/6
ented markings.
7/29/2019 Requriements of Tender
6/6