RESEARCH PUBLICATIONS -2017

S.

No

.

Names of the

authors Title, Year, Vol, Pages Journal Name

Impact

Factor,

if any

1.

K.Obi Reddy,

C.Uma Maheswari,

M.S.Dhlamini,

B.M.Mothudi,

Jinming Zhang Jun

Zhang, N.Rajini

A.Varada Rajulu

Preparation and characterization of

regenerated cellulose films using

borassus fruit fibers and an ionic liquid,

2017, Vol. 160, 203-211 Carbohydrate

Polymers 4.811

2.

Senthil Muthu

Kumar Thiagamani,

Rajini Nagarajan,

Mohammad Jawaid,

Varadarajulu

Anumakonda,

Suchart Siengchin

Utilization of chemically treated

municipal solid waste (spent coffee

bean powder) as reinforcement in

cellulose matrix for packaging

applications, 2017,

DOI:10.1016/j.wasman.2017.07.035

Waste

Management 4.03

3.

L.Muthulakshmi,

N.Rajini,

A.Varada Rajalu,

S.Siengchin,

T.Kathiresan

Synthesis and characterization of

cellulose/silver nanocomposites from

bioflocculant reducing agent, 2017,

Vol. 103, 1113-1120

International

Journal of

Biological

Macromolecules

3.671

4.

P. Sivaranjana,

E.R.Nagarajan,

N. Rajini,

M. Jawaid,

A.Varada Rajulu

Cellulose nanocomposite films with in

situ generated silver nanoparticles

using Cassia alata leaf extract as a

reducing agent.

DOI:10.1016/j.ijbiomac.2017.02.070

International

Journal of

Biological

Macromolecules

3.671

5.

K. Jayaraman,

I. Gokalp,

S. Jeyakumar

Estimation of synergetic effects of CO2

in high ash coal-char steam

gasification, 2017, Vol. 110, 991-998

Applied

Thermal

Engineering

3.356

6.

S.Thirumalai

Kumaran,

V.Arumuga Prabu,

Yu Zhen,

Ki Moon park,

Ye In Kwak,

Md. Mofizul Islam,

Tae Jo Ko,

Rendi Kurniawan

Measurement of Burr Removal Rate

and Analysis of Machining Parameters

in Ultrasonic Assisted Dry EDM (US-

EDM) for Deburring Drilled Holes in

CFRP Composite, 2017, Vol. 110, 98-

115

Measurement 2.359

7.

P.A. Udaya Kumar,

Ramalingaiah,

B. Suresha,

N. Rajini,

K.G. Satyanarayana

Synergy of Cashew Nut Shell Filler on

Tribological Behaviours of Natural

Fiber Reinforced Epoxy Composite,

2017 (Accepted)

Polymer

composites 2.324

8.

S.Thirumalai

Kumaran,

Tae Jo Ko,

M.Uthayakumar,

M.Adam Khan,

Imran Muhammad

Some experimental investigations on

drilling AA (6351)-SiC-B4C

composite, 2017, Vol. 32, 1557-1564 Materials and

Manufacturing

Processes

2.274

9.

Kalirasu S, Rajini N,

Rajesh S,

J.T.Winowlin

Jappes,

Karuppasamy K

AWJM Performance of Jute/Polyester

Composite using MOORA and

Analytical Models,

DOI:10.1080/10426914.2017.1279314

Materials and

Manufacturing

Process

2.274

10.

Kalirasu. S, Rajini.

N, Rajesh. S,

Suchart Siengchin.

H, Ramaswamy S.N

AWJ Machinability Performance of

CS/UPR Composites with the Effect of

Chemical Treatment,

DOI:10.1080/10426914.2017.1328114

Materials and

Manufacturing

Processes

2.274

11.

M. Adam Khan,

N. Ram Prasad,

S. Navaneetha

Krishnan,

S. Karthic Raja,

J. T. Winowlin

Jappes,

Muthukannan

Duraiselvam

Laser treated austenitic

steel and nickel alloy for human

implants, 2017, Vol. 32, 1635-1641

Materials and

Manufacturing

Processes

2.274

12.

S. P. Jani,

A. Senthil Kumar,

M. Adam Khan,

M. Uthaya Kumar

Machinablity of Hybrid Natural Fibre

Composite with and Without Filler as

Reinforcement,

DOI:10.1080/10426914.2015.1117633

Materials and

Manufacturing

Processes

2.274

13.

Maniram Kumar A,

Rajakarunakaran S,

Arumuga Prabhu V

Application of Fuzzy HEART and

expert elicitation for quantifying

human error probabilities in LPG

refuelling station,

DOI:10.1016/j.jlp.2017.04.021

Journal of Loss

Prevention in

the Process

Industries

1.818

14.

S Rajesh,

M Pethuraj,

S Thirumalai

Kumaran,

M Uthayakumar,

N Rajini

Some studies on drilling of red mud

reinforced aluminium composite, 2017,

Vol. 231 (4) 382-393,

Journal of

Materials:

Design and

Applications

1.625

15.

T.Senthil Muthu

Kumar,N. Rajini,

Huafeng Tian,

A. Varada Rajulu,

J.T.Winowlin

Jappes,

H.Suchart Siengchin

Development and Analysis of

Biodegradable Poly (Propylene

Carbonate)/Tamarind Nut Powder

Composite Films, 2017, Vol. 22 (5),

415-423

International

Journal of

Polymer

Analysis and

Characterization

1.515

16.

L. Muthulakshmi,

H. Nellaiah,

T. Kathiresan,

N. Rajini,

Fenila Christopher

Identification and Production of Bio

flocculants by Enterobacter sp. and

Bacillus sp. and their Characterization

Studies,

DOI:10.1080/10826068.2017.1292287

Preparative

Biochemistry

and

Biotechnology

1.361

17.

V.Arumuga Prabu,

R.Deepak Joel

Johnson,

P.Amuthakkannan,

V.Manikandan

Usage of Industrial Wastes as

Particulate Composite for Environment

Management: Hardness, Tensile and

Impact Studies, 2017, Vol. 5, 1289-

1301

Journal of

Environmental

Chemical

Engineering

1.355

18.

K.Senthilkumar,

I.Siva,

Mohammad Thariq

HameedSultan,

N,Rajini,

Suchart Siengchin,

Mohamad Jawaid,

Ahmad Hamdan

Static and Dynamic Properties of Sisal

Fiber Polyester Composites– Effect of

Inerlamina Fiber Orientation, 2017

(Accepted) Bio Resources 1.324

19.

P Amuthakkannan,

V Manikandan,

M Ayyanar Raja,

S Rajesh

Wear Characterization of

Aluminium/Basalt Fiber Reinforced

Metal Matrix Composites-A Novel

Material,

DOI:10.24874/ti.2017.39.02.09

Tribology in

Industry 1.32

20.

S Karthikeyan,

N Rajini,

M Jawaid,

JT Winowlin Jappes,

MTH Thariq,

Suchart Siengchin,

J Sukumaran

A review on tribological properties of

natural fiber based sustainable hybrid

composite, 2017, Vol.48, 112-121 International

Journal

Engineering

Tribology

1.32

21.

M. T. Sambandam,

N. A. Madlool,

R. Saidur,

D. Devaraj,

S.Rajakarunakaran

Investigation of energy saving

potentials in T-junction and elbow in

compressed air systems,

DOI:10.1007/s12053-016-9493-0

Energy

Efficiency 1.186

22.

T.Senthil Muthu

Kumar,

N. Rajini,

M. Jawaid,

A.Varada Rajulu,

J.T. Winowlin

Jappes

Preparation and Properties of

Cellulose/Tamarind Nut Powder Green

Composites,

DOI:10.1080/15440478.2017.1302386 Journal of

Natural Fibers 0.974

23.

Adam Khan M,

Sundarrajan S,

Natarajan S

Studies on thermally grown oxide as an

interface between plasma-sprayed

coatings and a nickel-based super alloy

substrate, 2017, Vol. 24 (6), 681-690

Journal of

Minerals,

Metallurgy and

Materials

0.943

24. N. C. Brintha,

Shajulin Benedict,

A Bio-Inspired Hybrid Computation

for Managing and Scheduling Virtual

An International

Journal of 0.94

J. T. Winowlin

Jappes

Resources using Cloud Concepts,

DOI:10.18576/amis/110228

Applied

Mathematics &

Information

Sciences

25.

M. Adam Khan,

S. Sundarrajan,

S. Natarajan

Design and statistical analysis of

plasma coatings on super alloy for gas

turbine applications,

DOI:10.1080/09603409.2016.1222051

Materials at

High

Temperatures

0.802

26.

V.Arumuga Prabu,

S.Thirumalai

Kumaran,

M.Uthayakumar,

V.Manikandan

Influence of Redmud Particle

Hybridization in Banana/Sisal and

Sisal/Glass Composites,

DOI:10.1080/02726351.2016.1267284

International

journal of

Particulate

Science and

Technology

0.784

27.

M. Uthayakumar,

K Vinoth Babu,

S.Thirumalai

Kumaran,

S. Suresh Kumar,

J.T. Winowlin

Jappes,

T. P. D. Rajan

A Study on the Machining of Al–SiC

Functionally Graded Metal Matrix

Composite Using Die–Sinking EDM,

DOI:10.1080/02726351.2017.1346020

An International

Journal of

Particulate

Science and

Technology

0.784

28.

S.Thirumalai

Kumaran,

Tae Jo Ko,

M. Uthayakumar,

M. Adam Khan,

Magdalena

Niemczewska-

Wójcik

Surface texturing by dimple formation

in Ti Al Si Zr alloy using μ-EDM,

DOI:10.1007/s41779-017-0095-x Journal of

Australian

Ceramic Society

0.744

29.

S.Rajesh,

M.Purusothaman,

J.Manivannan,

N. Rajini,

M.Uthayakumar,

S.Thirumalaikumara

n

Mechanical and Machinability

characteristics of Al–NiTi composites

reinforced with SiC particulates, 2017,

Vol. 53 (1), 177–185

Journal of

Australian

Ceramic Society

0.744

30.

Ayyanar raja,

P.Amuthakkannan,

V. Manikandan,

S. Rajesh

Wear resistance of Basalt particulates

reinforced stir-cast Al7075 metal

matrix composites, 2017 (Accepted)

Journal of the

Australian

Ceramic Society

0.744

31.

K. Balamurugan,

M. Uthayakumar

S. Sankar

U. S. Hareesh

K. G. K. Warrier

Effect of abrasive waterjet machining

on LaPO4/Y2O3ceramic matrix

composite, DOI: 10.1007/s41779-017-

0142-7.

Journal of the

Australian

Ceramic Society

0.744

32.

T.P. Sathishkumar,

S. Arun Kumar,

P.Navaneethakrishna

n, I. Siva, N. Rajini

Synergy of cashew nut shell filler on

tribological behaviors of natural-fiber-

reinforced epoxy composite,

DOI:10.1515/secm-2016-0243

Science and

engineering

composite

materials

0.542

33.

J Thanikachalam,

P Nagaraj,

T Gopala Krishnan,

M Adam Khan

Investigation of structural integrity and

corrosion behaviour of thermal barrier

coating, 2017, Vol. 55 (1-3), 17-30

International

Journal of

Materials and

Product

Technology

0.45

34.

S Kavitha,

P Venkumar

Ant-based job shop scheduling with

genetic algorithm for make span

minimisation on identical machines,

2017, Vol. 9 (2), 199-206.

International

Journal of

Computer Aided

Engineering and

Technology

Scopus

Indexed

35.

G. Kalusuraman,

I. Siva,

J.T. Winowlin

Jappes,

Sandro Campos

Amico

Effect of starch treatment and

hybridisation on the mechanical

properties of natural fibre composites,

2017, Vol. 9 (2), 261-269.

International

Journal of

Computer Aided

Engineering and

Technology

Scopus

Indexed

36.

K Vinoth Babu,

M Uthayakumar,

JT Winowlin Jappes,

TPD Rajan

Optimization of Drilling Process on Al-

SiC Composite using Grey Relation

Analysis,

DOI:10.4018/IJMMME.2015100102

Materials

Science and

Engineering:

Concepts,

Methodologies,

Tools, and

Applications:

Scopus

Indexed

37.

S Jeyakumar,

V.Venkateshwaran,

N Surjith,

A Karkuvel Raja,

GS Samy

Experimental Investigations on Aft

Ramp Cavities with Fore Wall

Modifications in Scramjet Combustors,

2017, 1203-1212

Fluid Mechanics

and Fluid

Power–

Contemporary

Research

Scopus

Indexed

38.

R. Deepak Joel

Johnson,

V Arumuga Prabu,

P Amuthakkannan,

K Arun Prasath

A Review On Bio composites And Bio

resin Based Composites For Potential

Industrial Applications, 2017, Vol. 48,

112-121

Reviews on

Advanced

Materials

Science

Scopus

Indexed

39.

A Pandian,

A P Veerasimman,

M Vairavan,

C Francisco,

M T H Sultan

A study on the crushing behavior of

basalt fiber reinforced composite

structures, 2016, Vol. 152, 012052

DOI:10.1088/1757-899X/152/1/012052

Materials

Science and

Engineering

Scopus

Indexed

40.

M. Adam Khan,

S Sundarrajan,

S Natarajan

Hot corrosion behaviour of Super 304H

for marine applications at elevated

temperatures, DOI:10.1108/ACMM-

04-2015-1528

Anti-Corrosion

Methods and

Materials,

Scopus

Indexed

41.

S. Muthuvel,

S. Saravana Sankar,

R. Sudhakara

Pandian,

M. Muthukannan

Testing and performance analysis of

micro encapsulated rice bran distilled

fatty acid, Vol. 9 (2),

DOI:10.1504/IJCAET.2017.083389

International

Journal of

Computer Aided

Engineering and

Technology

Scopus

Indexed

42.

G.Poomarimuthuku

mar, I. Siva,

M. Thirukumaran,

J.T. Winowlin

Jappes

A short review on fretting wear

behaviour of Al7075. International

Journal of

Computer Aided

Engineering and

Technology

Scopus

Indexed

43.

K.Mayandi,

N.Rajini,

J.T.Winowlin

Jappes,

Suchart Siengchin.H

Effect of Chemical Treatment on

Tensile and flexural Performance of

Cyperus Pangorei Fibre Reinforced

Polyester Composites, 2017,

(Accepted)

Applied

Mechanics And

Materials

Scopus

Indexed

44.

C.Bennet,

N.Rajini,

J.T.Winowlin

Jappes,

Suchart Siengchin.H

Effect of Curing Temperature on

Mechanical Properties of Sansevieria

Cylindrica Polyester Composites, 2017

(Accepted)

Applied

Mechanics And

Materials

Scopus

Indexed

RESEARCH PUBLICATIONS – 2016

S.

No

Names of the

authors Title, Year, Vol, Pages Journal Name

Impact

Factor, if

any

1.

V. Sadanand,

N. Rajini,

A. Varada Rajulu,

B. Satyanarayana

Preparation of cellulose composites

with in situ generated copper

nanoparticles using leaf extract and

their properties,

2016,DOI:http://dx.doi.org/doi:10.

1016/j.carbpol.2016.04.121

Carbohydrate

Polymers

4.811

2.

L. Muthulakshmi,

N. Rajini,

H. Nellaiah,

T. Kathiresan,

M. Jawaid,

A. Varada Rajalu

Preparation and properties of

cellulose nanocomposite films with

in situ generated copper

nanoparticles using

Terminalia catappa leaf extract,

2016,

DOI:http://dx.doi.org/doi:10.1016/j

.ijbiomac.2016.09.114

International

Journal of

Biological

Macromolecules 3.671

3.

K. Senthil Kumar,

I. Siva, N. Rajini,

J.T. Winowlin

Jappes, S.C.

Amico

Layering pattern effects on

vibrational behavior of coconut

sheath/banana fiber hybrid

composites, 2016, 90, 795–803

Materials and

Design

3.501

4.

S.Karthikeyan,

N.Rajini,

Patrick De Baets,

S. Saravanasankar,

Winowlin

Thangiah, Jacob

Sukumaran

Eco-friendly mono-layered PTFE

blended polymer composites for

dry sliding tribo - systems, 2016,

DOI:http://dx.doi.org/10.1016/j.trib

oint.2016.06.015

Tribiology

International

2.903

5.

M. Chithambara

Thanu,

T. Christopher,

V. Manikandan,

J. Selwin

Rajadurai

Influence of Permacore T-18

Polyester Fibre Stitched around

circular hole in Woven Jute Fibre

Reinforced Composite, 2016 Vol.

VII/Issue II/1321-1325

International

Journal of

Advanced

Engineering

Technology

2.76

6.

S. Suresh Kumar,

M. Uthayakumar,

S.Thirumalai

Kumaran,

P. Parameswaran,

E. Mohandas,

G. Kempulraj,

B.S. Ramesh

Babu, S.A.

Natarajan

Parametric optimization of wire

electrical discharge machining on

aluminium based composites

through grey relational analysis,

2015,

DOI:http://dx.doi.org/10.1016/j.jm

apro.2015.09.011

Journal of

Manufacturing

Processes

2.322

7.

L. Muthulakshmi,

N. Rajini,

H. Nellaiah,

Experimental Investigation of

Cellulose/Silver Nanocomposites

Using In Situ Generation Method,

Journal of

Polymers and the 1.877

T. Kathiresan,

M. Jawaid,

A. Varada Rajulu

2016, DOI: 10.1007/s10924-016-

0871-7

Environment

8.

N Rajini,

JT Winowlin

Jappes,

I Siva,

A Varada Rajulu,

S Rajakarunakaran

Fire and thermal resistance

properties

of chemically treated ligno-

cellulosic coconut fabric–

reinforced polymer eco-nano

composites, 2016, 0(00), 1–21

Journal of

Industrial Textiles

1.750

9.

TP Sathishkumar,

J Naveen,P

Navaneethakrishna

n, S

Satheeshkumar,

N Rajini

Characterization of sisal/cotton

fibre woven mat reinforced

polymer hybrid composites, 2016,

0(00), 1–24

Journal of

Industrial Textiles

1.750

10.

K Vinoth Babu,

JT Winowlin

Jappes,

TPD Rajan,

M Uthayakumar

Dry sliding wear studies on SiC

reinforced functionally graded

aluminium matrix composites,

2014, 0(0), 1–8

Journal of

Materials Design

and Applications 1.625

11. S

S. Richard,

J. Selwin

Rajadurai,

V. Manikandan

Effects of particle loading and

particle size on tribological

properties of biochar particulate

reinforced polymer composites,

2015, DOI::10.1115/1.4033131

Journal of

Tribology

1.521

12.

K. Mayandi,

N. Rajini,

P. Pitchipoo,

J. T. Winowlin

Jappes,

A . Varada Rajulu

Extraction and Characterization of

New Natural Lingo-Cellulosic

Fiber Cyperus Pangorei, 2015,

DOI:

10.1080/1023666X.2016.1132064

International

Journal of Polymer

Analysis and

Characterization 1.515

13.

V. Sadanand,

N. Rajini,

B. Satyanarayana,

A. Varada Rajulu

Preparation and Properties of

Cellulose/Silver Nanoparticle

Composites with in situ Generated

Silver Nanoparticles using

Ocimum sanctum Leaf Extract,

2016, DOI:

10.1080/1023666X.2016.1161100

International

Journal of Polymer

Analysis and

Characterization 1.515

14.

S. Richard,

J. Selwin

Rajadurai,

V. Manikandan

Influence of Particle Size and

Particle Loading on Mechanical

and Dielectric Properties of

Biochar Particulate Reinforced

Polymer Nanocomposites,

2016,DOI:10.1080/1023666X.2016

.1168602

International

Journal of Polymer

Analysis and

Characterization 1.515

15.

K. Mayandi,

N. Rajini,

P. Pitchipoo,

J.T. Winowlin

Jappes,

Properties of Untreated and

Chemically Treated Cissus

Quadrangularis Natural Fibers and

Their Composites With Polyester

as the Matrix, 2016, DOI

Polymer

Engineering &

Science

1.449

A. Varada Rajulu 10.1002/pc.24011

16.

M. Uthayakumar,

M. Adam Khan,

S. Thirumalai

Kumaran,

Adam Slota,

Jerzy Zajac

Machinability of Nickel Based

Superalloy by Abrasive Water Jet

Machining, 2016, DOI:

10.1080/10426914.2015.1103859

Materials and

Manufacturing

Processes

1.419

17.

B. Muralidharan,

H. Chelladurai,

Praveen Singh,

Mukesh Kumar

Roy

Single Spark Analysis of Electro-

Discharge Deposition (EDD)

Process,

2015,DOI:10.1080/10426914.2015

.1127936

Materials and

Manufacturing

Processes 1.419

18.

S. P. Jani,

A. Senthil Kumar,

M. Adam Khan,

M. Uthaya Kumar

Machinability of hybrid natural

fibre composite with and without

filler as

Reinforcement, 2015, DOI:

10.1080/10426914.2015.1117633

Materials and

Manufacturing

Processes 1.419

19.

V. Arumuga

Prabu,

S. Thirumalai

Kumaran,

M. Uthayakumar

Performance Evaluation of

Abrasive Water Jet Machining on

Banana Fiber Reinforced Polyester

Composite,

2016,DOI:10.1080/15440478.2016

.1212768

Journal of Natural

Fibers

0.974

20.

N.C. Brintha,

Shajulin Benedict,

J.T.Winowlin

Jappes

A Bio-Inspired Hybrid

Computation for Managing and

Scheduling Virtual Resources

using Cloud Concepts, 2017, 11,

No. 2, 565-572

Applied

Mathematics &

Information

Sciences

0.94

21.

P. Rajesh Kanna,

M.

Sivasubramanian,

P. Maheandera

Prabu,

M. Uthayakumar

Numerical Simulation of Steady

Flow and Forced Convection Heat

Transfer from Two Offset Square

Cylinders Placed in a Channel,

2015, DOI:10.1007/s13369-016-

2311-3

Arabian Journal for

Science and

Engineering 0.865

22.

S. Thirumalai

Kumaran,

M. Uthayakumar,

Adam Slota,

S. Aravindan,

Jerzy Zajac

Machining Behavior of AA6351-

SiC-B4C Hybrid Composites

Fabricated by Stir Casting Method,

2015, DOI:

10.1080/02726351.2015.1093050

Particulate Science

and Technology

0.784

23.

G. Kalusuraman,

I. Siva,

J.T. Winowlin

Jappes,

S. Anand Kumar

Effects of fiber surface

modification on the friction

coefficient of luffa fiber/polyester

composites under dry sliding

condition, 2016, DOI:

10.1515/polyeng-2015-0316.

Journal of Polymer

Engineering

0.658

24.

M. Edwin

Sahayaraj,

J.T. Winowlin

Jappes,

I. Siva,

N. Rajini

Investigation on corrosion

performance of multilayer Ni-

P/TiO 2 composite coating on

steel, 2014, DOI: 10.1515/secm-

2014-0134

Science and

Engineering of

Composite

Materials

0.480

25.

S. Jeyakumar,

Shan M. Assis,

K. Jayaraman

Effect of Axisymmetric Aft Wall

Angle Cavity in Supersonic Flow

Field, 2016, DOI:10.1515/tjj-2016-

0027

International

Journal of Turbo &

Jet-Engines

0.470

26.

S Jeyakumar,

Shan M Assis,

K Jayaraman

Experimental study on the

characteristics of axisymmetric

cavity actuated supersonic flow,

2016, 0(0), 1–8

Journal of

Aerospace

Engineering 0.454

27.

S Jeyakumar,

K Jayaraman

Effect of finite width cavity in

axisymmetric supersonic flow

field, 2016, 0(0), 1–5

Journal of

Aerospace

Engineering

0.454

28.

D. Chellaganesh,

M. Adam Khan,

J. T. Winowlin

Jappes,

S.

Sathiyanarayanan

Cyclic Oxidation and Hot

Corrosion Behavior of Nickel–

Iron-Based Superalloy, 2016,

DOI:10.1515/htmp-2016-0130

High Temperature

Materials and

Processes 0.312

29.

S Jeyakumar,

K Arun Yuvaraj,

K Jayaraman,

F Cardona,

M T H Sultan

Effect of cavity fore wall

modifications in supersonic flow

Materials Science and Engineering

2016, 152, 012002

Materials Science

and Engineering Scopus

Indexed

30.

K Senthilkumar,

I Siva,

J T Winowlin

Jappes,

S C Amico,

F Cardona,

M T H Sultan

Effect of inter-laminar fibre

orientation on the tensile properties

of sisal fibre reinforced polyester

composites, 2016, 152, 012055

Materials Science

and Engineering

Scopus

Indexed

31.

R Shanmugavel,

M Jayamani,

R Nagarajan,

S Irullappasamy,

F Cardona,

M T H Sultan

Processing and characterization of

redmud reinforced polypropylene

composites, 2016, 152, 012053

Materials Science

and Engineering

Scopus

Indexed

32.

M Rajesh,

Jeyaraj

Pitchaimani,

N Rajini

Free Vibration Characteristics of

Banana/Sisal Natural Fibers

Reinforced Hybrid Polymer

Composite Beam, 2016, 144, 1055

– 1059

Procedia

Engineering Scopus

Indexed

33.

S. Bathrinath,

S. Saravanasankar,

S. G.

Combined-objective optimization

in identical parallel machine

scheduling problem using PSO,

ARPN Journal of

Engineering and

Applied Sciences

Scopus

Indexed

Ponnambalam 2016, Vol. 11, No. 12

34.

Jijo James,

P. Kasinatha

Pandian,

K. Deepika,

J. Manikanda

Venkatesh,

V. Manikandan,

P. Manikumaran

Cement Stabilized Soil Blocks

Admixed with Sugarcane Bagasse

Ash, Volume 2016, Article ID

7940239, 9pages

http://dx.doi.org/10.1155/2016/794

0239

Journal of

Engineering

Scopus

Indexed

35.

V. Manikandan,

S. Richard,

M. Chithambara

Thanu,

J. Selwin

Rajadurai

Effect of Fly Ash as filler on

mechanical & frictional properties

of Jute Fiber Reinforced

Composite, 2015, Volume:

02,Issue: 07.

International

Research Journal of

Engineering and

Technology

Scopus

Indexed

36.

S. Suresh Kumar,

M. Uthayakumar,

S. Thirumalai

Kumaran,

P. Parameswaran,

E. Mohandas

Electrical discharge machining of

Al (6351) alloy: role of electrode

shape, 2016, Vol. 53, No. 1,

International

Journal of

Materials and

Product

Technology,

Scopus

Indexed

37.

P. Pitchipoo,

D.S. Vincent,

N. Rajini,

S.

Rajakarunakaran

Fuzzy Analytical Hierarchy

Process Based Optimization of

Rear View Mirror Design

Parameters for Blind Spots

Reduction in Heavy Transport

Vehicles, 2015, 7(4), 136-140

International

Journal of

Vehicle Structures

& Systems

Scopus

Indexed

38.

A. Maniram

Kumar,

S.

Rajakarunakaran,

V. Arumuga Prabu

Human Reliability Analysis by

Cognitive Approach for Unloading

Process in an ALDS (Auto LPG

Dispensing Station), 2015, Vol

8(26), DOI:

10.17485/ijst/2015/v8i26/80993,

Indian Journal of

Science and

Technology, Scopus

Indexed

39.

Rajesh

Shanmugavel,

Thirumalai

Kumaran

Sundaresan,

Uthayakumar

Marimuthu,

Pethuraj

Manickaraj

Process Optimization and Wear

Behavior of Red Mud Reinforced

Aluminum Composites, Volume

2016, Article ID 9082593, 7 pages

DOI:http://dx.doi.org/10.1155/201

6/9082593

Advances in

Tribology

Scopus

Indexed

40.

S. P. Prasanna,

Dr. N. Bose

Reduction of NOx using Selective

Catalytic Reduction in a Bio-

Fuelled C.I Engine, 2016, Vol. 5,

Issue7,

DOI:10.15680/IJIRSET.2016.0507

123

International

Journal of

Innovative

Research in

Science,

Engineering and

Technology

Scopus

Indexed

41.

V.Manikandan,

P.

Amuthakkannan,

V. Arumuga Prabu

Review on Natural Fiber

Composites: Banana/Hemp Fiber

and Its Hybrid Composites, 2015,

Vol. 1: Issue 2

International

Journal of

Composite

Material and

Matrices

Scopus

Indexed

42.

P. Gurusamy

Pandian,

S. Saravanasankar,

Dr. S.

N.Ramasamy,

Dr. V.

Manikandan

Prediction of Dust Level in Indian

Textile Industries and its Impact on

Human Health, 2016, Volume 2

Issue 5

International

Journal of

Scientific Research

in Science,

Engineering and

Technology.

Scopus

Indexed

RESEARCH PUBLICATIONS-2015

S.

No Names of the authors Title, year, vol, pages Journal Name

Impact

factor, if

any

43.

P.Ganesan,

S.Rajakarunakaran,

M.Thirugnanasamban

dam,

D.Devaraj.

Artificial neural network model to

predict the diesel electric generator

performance and exhaust emissions,

83 (2015) 115e124

Energy 4.844

44.

A.Alavudeen,

N.Rajini,

S.Karthikeyan,

M.Thiruchitrambalam,

N.Venkateshwaren.

Mechanical properties of banana/kenaf

fiber-reinforced hybrid polyester

composites: Effect of woven fabric

and random orientation,

http://dx.doi.org/10.1016/j.matdes.201

4.10.067

Materials &

Design 3.501

45.

V.S.Srinivasan,

N.Rajini,

A.Alavudeen,

V.Arumuga Prabu.

Dynamic mechanical and thermo-

gravimetric analysis of Sansevieria

cylindrica/polyester composite: Effect

of fiber length, fiber loading and

chemical treatment, 69 (2015) 76–86

Composites Part

B: Engineering 2.983

46.

M.Adam Khan.

Electrochemical polarisation studies

on plasma-sprayed nickel-based

superalloy, DOI 10.1007/s00339-015-

9291-0.

Applied Physics

A: Material

Science and

Processing

1.704

47.

P.Balamurugan,

M.Uthayakumar.

Influence of Process Parameters on

Cu–Fly Ash Composite by Powder

Metallurgy Technique, DOI:

10.1080/10426914.2014.984220

Materials and

Manufacturing

Processes

1.629

48.

S.Kalirasu,

N.Rajini,

J.T.W.Jappes,

M.Uthayakumar,

S.Rajesh.

Mechanical and machining

performance of glass and coconut

sheath fibre polyester composites

using AWJM, DOI:

10.1177/0731684415574870

Journal of

Reinforced

Plastics and

Composites

1.503

49.

C.Bennet,

N.Rajini,

J.T.W.Jappes, I.Siva,

V.S.Sreenivasan,

S.C.Amico.

Effect of the stacking sequence on

vibrational behavior of Sansevieria

cylindrica/coconut sheath polyester

hybrid composites, DOI:

10.1177/0731684415570683

Journal of

Reinforced

Plastics and

Composites

1.503

50.

K.Mayandi, N.Rajini,

P.Pitchipoo,

V.S.Sreenivasan,

J.T.Winowlin Jappes,

A.Alavudeen.

A comparative study on

characterisations of

Cissusquadrangularis and Phoenix

reclinata natural fibres, DOI:

10.1177/0731684415570045.

Journal of

Reinforced

Plastics and

Composites

1.503

51.

P.Ganesan,

S.Rajakarunakaran,

M.T.Sambandam,

D.Devaraj.

Specific energy consumption and CO2

emission analysis in a textile industry,

(2015) 12, 685–693

International

Journal of Green

Energy

1.215

52.

M.AdamKhan,

S.Sundarrajan,

M.Duraiselvam,

S.Natarajan, A.Senthil

Kumar.

Sliding wear behaviour of plasma

sprayed coatings on nickel based

superalloy.

Surface

Engineering 1.197

53.

S.Bathrinath,

S.Saravanasankar,

SS.Mahapatra,

ManasRanjan Singh

and SG.Ponnambalam.

An improved meta-heuristic approach

for solving identical parallel processor

scheduling problem, DOI:

10.1177/0954405414564410

Journal of

Engineering

Manufacture

0.954

54.

S.Muthuvel,

S.Saravanasankar,

R.Sudhakarapandian,

M. Muthukannan.

Passive Cooling by Phase Change

Material Usage in Construction, DOI:

10.1177/0143624414556123

Building

Services

Engineering

Research And

Technology

0.82

55.

S.ThirumalaiKumaran,

M.Uthayakumar,

S.Aravindan,

S.Rajesh.

Dry sliding wear behavior of SiC and

B4C-reinforced AA6351 metal matrix

composite produced by stir casting

process,

DOI: 10.1177/1464420715579302

Journal of

Materials

Design and

Applications.

0.672

56.

S.Rajesh, M.Pethuraj,

S.Thirumalai

Kumaran,

M.Uthayakumar,

N.Rajini.

Some studies on drilling of red mud

reinforced aluminum composite,

DOI: 10.1177/1464420715598173

Journal of

Materials:

Design and

Applications

0.672

57.

C.Bennet, N.Rajini,

I.Siva,

W.Jappes,J.Thangiah,

S.C.Amico.

Effect of curing temperature and

layering pattern on performance

studies: a novel hybrid composite,

2015; 35(2): 127–134

Journal of

Polymer

Engineering

0.645

58.

M.Sivasubramania,

P.Rajesh Kanna,

S.Rajesh,

M.Uthayakumar.

Experimental Investigation on Heat

Transfer Enhancement from a Channel

with Square Blocks and Identification

of Most Influencing Parameters using

Taguchi Approach.

Journal of

Mechanical

Engineering

Science

0.56

59.

M.Muthukannan,

P.Rajeshkanna,

S.Jeyakumar,

Ankitbajpai.

Flow field and heat transfer

characteristics investigation of a

confined laminar slot air jet on a solid

block, ISSN 1735-3645.

Journal of

Applied Fluid

Mechanics

0.5

60.

Ayyanar

Athijayamani,

Balasubramaniam

Stalin, Susaiyappan

Sidhardhan, Azeez

Batcha Alavudeen.

Mechanical properties of uni-

directional aligned bagasse

fibers/vinyl ester composite,

DOI: 10.1515/polyeng-2014-0325,

Journal of

Polymer

Engineering

0.465

61.

M.Sivasubramania,

P. Rajesh Kanna,

M. Uthayakumar,

Experimental Investigation on Heat

Transfer Enhancement from a Channel

Mounted with Staggered Blocks|,

Arabian Journal

for Science and

Engineering

0.367

P. Ganesan. (2015) 40:1123–1139

62.

S.ThmalaiKumaran,

M.Uthayakumar,

A.Slota, J.Zajac.

Application of Grey relational analysis

in high speed machining of AA

(6351)-SiC-B4C hybrid composite,

Vol. 51, No. 1, 2015

International

Journal of

Materials and

Product

Technology

0.261

63.

P.Amuthakkannan,

V.Manikandan,

M.Uthayakumar.

Analysis of Delamination in Drilling

of Basalt Fiber Reinforced Polymer

Composites,

24 (2015) 1-8.

Materials

Physics and

Mechanics

Scopus

Indexed

64.

S.Bathrinath,

S.Saravanasankar,

S.G.Ponnambalam,

I.Jerinleno.

Multi-Objective Optimization in

Identical Parallel Machine Scheduling

Problem using NSGA-II, SSN 0973-

4562 Volume 10, Number 6 (2015)

International

Journal of

Applied

Engineering

Research

Scopus

Indexed

65.

S.ThirumalaiKumaran,

M.Uthayakumar,

V.S.KiranKumar,

A.Meenatchi

Sundaram,

E.Milton Rajaselvam.

Parametric Optimization of AWJM in

AA6351-SiC-B4C Hybrid Composite

Using Grey Relational Analysis, Vols

766-767 (2015) pp 38-43

Applied

Mechanics and

Materials

Scopus

Indexed

66.

S.ThirumalaiKumaran,

M.Uthayakumar,

P.Mathiyazhagan,

K.Krishna Kumar,

P.Muthu Kumar.

Effect of Abrasive Grain Size of the

AWJM Performance on AA (6351)-

SiC-B4C Hybrid Composite, Vols

766-767 (2015) pp 324-329

Applied

Mechanics and

Materials

Scopus

Indexed

67.

S.Kalirasu, N.Rajini,

M.Subbiah, Suraj

sampatrao

suryavanshi, C.Suren.

Analysis of kerf formation in basalt

fibre reinforced polyester by using co2

laser machining, ISSN 0973-4562

Vol. 10 No.2 (2015) pp. 1586-1589

International

Journal of

Applied

Engineering

Research

Scopus

Indexed

68.

S.Kalirasu, N.Rajini,

S.Rajesh, A.Mothilal,

R.Jegadeesan.

Optimization of Abrasive Water Jet

Machining (AWJM) Parameters for

Jute/Polyester Composites Using

Taguchi Method, ISSN 0973-4562

Vol. 10 No.57 (2015)

International

Journal of

Applied

Engineering

Research

Scopus

Indexed

69.

S.Kalirasu, N.Rajini,

S.Rajesh,

A.Muthukumar,

S.Jeyaram baskar,

R. John peter durairaj.

An investigation on Kerf Geometry

for Abrasive Waterjet Cutting of Jute

Fibre Reinforced Polyester

Composite, ISSN 0973-4562 Vol. 10

No.57 (2015).

International

Journal of

Applied

Engineering

Research

Scopus

Indexed

70.

S.Kalirasu, N.Rajini,

S.Rajesh, V.Gurusami

pandian.,

K.Muthumariappan,

M.Nagaraj.

Effect of Feed Rate on Abrasive

Waterjet Cutting of Glass Fibre

Reinforce Polyester Composite, ISSN

0973-4562 Vol. 10 No.57 (2015)

International

Journal of

Applied

Engineering

Research

Scopus

Indexed

71. S.Kalirasu, N.Rajini,

N.Bharath sagar,

Studies of Abrasive Water Jet

Machining (AWJM) Parameters on

Applied

Mechanics and

Scopus

Indexed

D.Mahesh kumar,

A.Gomathi sankar.

Banana/Polyester Composites Using

Robust Design Concept, Vol. 787

(2015) pp 573-577.

Materials

72.

C. Bennet, I. Siva,

J.T. Winowlin Jappes,

N. Rajini.

Effect of process parameters in

chemical modifications on mechanical

properties of Sansevieria

cylindrica/polyester composite using

Taguchi technique, Vol. 7, No. 1,

2015.

International

journal of

Computer Aided

Engineering and

Technology

Scopus

Indexed

73.

K.Mayandi, N.Rajini,

P.Pitchipoo,

V.Arumugaprabhu,

P.K.Vishnudev,

M.Vetrivel,

K. Vignesh.

Effect of Alkali Treatment on Tensile

and Physicochemical Characterization

of Cissus quadrangularis fiber, Vols.

813-814 (2015) pp 172-178

Applied

Mechanics and

Materials

Scopus

Indexed

74.

K.Senthilkumar,

I.Siva, J.T.Winowlin

Jappes,

M.Vikneshwararaj,

P.Karthick,

P.Devakumar.

Influence of orientation on tensile and

flexural properties of sisal fiber

polyester composite,

ISSN: 0974-2115

Journal of

Chemical and

Pharmaceutical

Sciences

Scopus

Indexed

75.

V.ArumugaPrabu,

V.Manikandan,

R.Venkatesh,

P.Vignesh, S.Vignesh,

K. Siva Sankar,

P. Sripathy,

E. Subburaj.

Influence of redmud filler on palmyra

fruit and palmyra fiber waste

reinforced polyester composite:

hardness, tensile and impact studies,

24 (2015) 41-49

Materials

Physics and

Mechanics

Scopus

Indexed

76.

M.Sivasubramania,

P.RajeshKanna,

M.Muthukannan

M.Uthayakumar.

Experimental Investigation on Flow

Through a Confined Rectangular

Channel Mounted With Square

Blocks, Vol. 10, No. 2 (2015) 212 –

223.

Journal of

Engineering

Science and

Technology

Scopus

Indexed

77.

P.RajeshKannaa,

M.Sivasubramanian,

M.Uthayakumar.

Numerical Investigation of Forced

Convection Conjugate Heat Transfer

from Offset Square Cylinders Placed

in a Confined Channel Covered by

Solid Wall, Vols. 813-814 (2015) pp

729-735.

Heat Transfer -

Asian Research

Scopus

Indexed

78.

P.MaheanderaPrabuM.

SivasubramanianP.Raj

eshKanna,

M.Uthayakumar,

K.P.Padmanaban.

Numerical Investigation of Forced

Convection Heat Transfer from offset

Square Cylinders Placed in a Three

Dimensional Confined Channel.

Applied

Mechanics and

Materials

Scopus

Indexed

79.

K.Jayakrishnaa,

S.Vinodha, S.Anisha.

A Graph Theory approach to measure

the performance of sustainability

enablers in a manufacturing

organization,

http://dx.doi.org/10.1080/19397038.20

15.1050970

International

Journal of

Sustainable

Engineering,

Taylor

and

Francis

80.

K.Mayandi, N.Rajini,

P.Pitchipoo,

J.T.Winowlin Jappes,

I.Siva.

Mechanical performance of Cissus

quadrangularis/polyester composite, 4

(2015) 222–232

Materials Today

Communication

s

Elsvier

81.

M.Muthukanna,

P.Rajesh Kanna,

S.Jeyakumar, J.Y.Raja

Shangaravel, S.Raghu,

K.Rajesh.

Numerical Investigation on

Visualizations of Confined Air Flow

in a Slot Jet inside a Rectangular

Channel, Vols. 813-814 (2015) pp

736-741

Applied

Mechanics and

Materials

Scopus

Indexed

RESEARCH PUBLICATIONS-2014

S.

N

o

Names of the

authors Title, year, vol, pages Journal Name

Impact

factor, if

any

1.

V.Arumuga Prabu,

M.Uthayakumar,

V.Manikandan,

N.Rajini,

P.Jeyaraj.

Influence of redmud on the

mechanical, damping and

chemical resistance properties of

banana/polyester hybrid

composites, 64 (2014) 270–279.

Materials and

Design 3.501

2.

S.Suresh Kumar,

M.Uthayakumar,

S.ThirmalaiKumara

n, P.Parameswaran.

Electrical Discharge Machining

of Al (6351)-SiC-B4C Hybrid

Composite, 29: 1395–1400,

2014.

Materials

and Manufacturing

Processes

1.629

3.

M.E.Sahayaraj,

J.T.W.Jappes,

I.Siva,

M.S.S.Saravanan.

A comparative corrosion study of

electroless Ni-P coatings treated

by microwave and conventional

furnace annealing, 2014; 32(1-2):

43–49.

Corrosion Reviews 1.526

4.

K.Senthil Kumar,

I.Siva, N.Rajini,

P.Jeyaraj,

J.T.W.Jappes.

Tensile, impact, and vibration

properties of coconut sheath/sisal

hybrid composites: Effect of

stacking sequence, DOI:

10.1177/0731684414546782.

Journal of

Reinforced Plastics

and Composites.

1.503

5.

S.Rajesh,

S.Rajakarunakaran,

R.Sudhkarapandian.

Optimization of the red mud-

aluminum composite in the

turning process by the Grey

relational analysis with entropy,

DOI:

10.1177/0021998313494914.

Journal of

Composite

Materials

1.173

6.

S.ThirumalaiKumar

an,

M.Uthayakumar.

Investigation on the dry sliding

friction and wear behavior of

AA6351-SiC-B4C hybrid metal

matrix composites, 2014, Vol.

228(3) 332–338.

Journal of

Engineering

Tribology

0.916

7.

N.Rajini,

J.T.Winowlin

Jappes, B.Suresha,

S.Rajakarunakaran,

I.Siva,

N.Azhagesan.

Effect of organically modified

montmorillonite clay on wear

behavior of naturally woven

coconut sheath/polyester

composite, 2014, Vol. 228(5)

483–497.

Journal of

Engineering

Tribology

0.916

8.

K.VinothBabu,

J.T. Winowlin

Jappes, T.P.D.

Rajan,

M.Uthayakumar.

Dry sliding wear studies on SiC

reinforced functionally graded

aluminium matrix composites,

DOI:

10.1177/1464420714556665

Journal of

Materials Design

and Applications

0.672

9.

P.Pitchipoo,

D.S.Vincent,

N.Rajini,

S.Rajakarunakaran.

COPRAS Decision Model to

Optimize Blind Spot in Heavy

Vehicles: A Comparative

Perspective, 97 ( 2014 ) 1049 –

1059.

Procedia

Engineering 0.629

10.

M.Muthukannan,

P.Rajesh Kanna,

Ankit Bajpai,

S.Jeyakumar.

Numerical Investigation on the

Fluid Flow Characteristics of a

Laminar Slot Jet on Solid Block

Mounted on a Horizontal

Surface, (2014) 39:8077–8098.

Arabian Journal for

Science and

Engineering

0.367

11.

M.Edwin Sahayaraj,

J.T.Winowlin

Jappes, I.Siva and

N.Rajini.

Investigation on corrosion

performance of multilayer Ni-

P/TiO2 composite coating on

steel, Vol. 8, 195–200, 2013.

Science and

Engineering of

Composite

Materials.

0.287

12.

I.Siva,

J.T.W Jappes,

Z.Szakal,

J.Sukumaran.

Alkali treatment and its effect on

tribological properties of

natrually woven coconut sheath

polyester composite.

International

Journal Sustainable

Construction &

Design

0.129

13.

P.Amuthakkannan,

V.Manikandan,

M.Uthayakumar.

Mechanical Properties of Basalt

and Glass Fiber Reinforced

Polymer Hybrid Composites,

Vol. 9, 1–6, 2014

Journal of

Advanced

Microscopy

Research

Scopus

Indexed

14.

V.Arumuga prabu,

M.Uthayakumar,

V.Manikandan,

N.Rajini.

Effect of Redmud on Dry Sliding

Wear Behaviour of Polymer

Matrix Composites: Taguchi

Approach, Vol. 9, 34–38, 2014

Journal of

Advanced

Microscopy

Research

Scopus

Indexed

15.

M.Uthayakumar

V.Arumuga prabu,

V.Manikandan.

Effect of Redmud Particulates on

Mechanical Properties of BFRP

Composites, Vol. 27, No. 11,

(November 2014) 1741-1750

Journal of

Engineering

Transactions B:

Applications

Scopus

Indexed

16.

V.Arumuga Prabu,

V.Manikandan,

M.Uthayakumar.

Tribology Studies and

Microscopic Analysis of

Polyester-Based Red Mud

Polymer Composites, Vol. 9,

306–311, 2014

Journal of

Advanced

Microscopy

Research

Scopus

Indexed

17.

S.ThirumalaiKumar

an,

M.Uthayakumar,

S.Aravindan.

Analysis of dry sliding friction

and wear behaviour of AA6351-

SiC-B4C composites using grey

relational analysis, 2014, VOL 8,

NO 4, 187-193.

Tribology-

Materials, Surfaces

and interfaces

Scopus

Indexed

18. S.ThirumalaiKumar

an,

Investigation on the machining

studies of AA6351-SiC-B4C

International

Journal of

Scopus

Indexed

M.Uthayakumar.

hybrid metal matrix composites,

Vol. 15, Nos. 3/4, 2014

Machining and

Machinability

19.

S.Suresh Kumar,

M.Uthayakumar,

S.ThirumalaiKumar

an,

P.Parameswaran,

E.Mohandas.

Electrical Discharge Machining

of Al (6351)-5% SiC-10% B4C

hybrid composite: A Grey

Relational approach, Volume

2014, Article ID 426718, 7

pages.

Modelling and

Simulation in

Engineering

Scopus

Indexed

20.

M.E.Sahayaraj,

J.T.Jappes, I.Siva.

Effect of Heat Treatment

Temperature on the Corrosion

Performance of Electroless Ni–

P/Ni–P–TiO2 Deposits on

Carbon Steel, Vol. 9, 1–6, 2014.

Journal of

Advanced

Microscopy

Research

Scopus

Indexed

21.

K.Senthil Kumar,

I.Siva,

N.Rajini,

S.Jeyaraj.

Effect of Fiber Length and

Weight Percentage on

Mechanical Properties of Short

Sisal/Polyester Composite, Vol.

7, No. 1, 2015.

Journal of

Computer Aided

Engineering and

Technology

Scopus

Indexed

22.

C.Bennet,

N.Rajini,

J.T. Winowlin

Jappes,

A.Venkatesh,

S.Harinarayanan,

G.Vinothkumar.

Effect of Lamina Fiber

Orientation on Tensile and Free

Vibration (by Impulse Hammer

Technique) Properties of

Coconut Sheath/Sansevieria

cylindrica Hybrid Composites,

Vols. 984-985 (2014) pp 172-177

Journal of

Advanced

Materials Research

Scopus

Indexed

23.

S.Muthuvel,

S.Saravanasankar,

R.Sudhakarapandia

n, M. Muthukannan.

Numerical and Experimental

Analysis on Inorganic Phase

Change Material Usage in

Construction, (October–

December 2014) 95(4):231–238

Journal of the

Institution of

Engineers

Scopus

Indexed

24.

S.Muthuvel,

S.Saravanasankar,

R.Sudhakarapandia

n, M. Muthukannan.

Testing and performance analysis

of micro encapsulated rice bran

distilled fatty acid

Computer Aided

Engineering and

Technology

Scopus

Indexed

25.

P.Balamurugan,

M.Uthayakumar,

Wear Studies on SiC and Fly Ash

Reinforced Copper Based

Composites by Grey Relational

Analysis, Vols. 984-985 (2014)

pp 304-312

Advanced

Materials Research

Scopus

Indexed

26.

S.Bathrinath,

S.Saravanasankar,

S.G.Ponnambalam,

I.Jerinleno,

VNS-Based Heuristic for

Identical Parallel Machine

Scheduling Problem, DOI

10.1007/978-81-322-2126-5_74.

Advances in

Intelligent Systems

and Computing

Scopus

Indexed

27.

M.Sivasubramanian

, R.Madhukkhiran,

P.Rajesh Kanna,

P.Manikumar,

M.Uthayakumar,

Numerical Investigation on

Laminar Flow Through a

Channel with Staggered Square

Blocks, 978-1-4799-3975-

6/14/$31.00 ©2014 IEEE

IEEE Scopus

Indexed

RESEARCH PUBLICATIONS-2013

S.

No

.

Names of the

authors Title, year, vol, pages Journal Name

Impact

factor, if

any

1

K.Senthil Kumar,

I.Siva, P.Jeyaraj,

J.T.Winowlin Jappes

S.C. Amico,

N.Rajini.

Synergy of fiber length and content on

free vibration and damping behaviour

of natural fiber reinforced polyester

composite beams, 56 (2014) 379–386

Materials and

Design 3.501

2

M.Uthayakumar,

S.Aravindan ,

K.Rajkumar.

Wear performance of Al-SiC-B4C

hybrid composites under dry sliding

conditions, 47 (2013) 456–464

Materials and

Design 3.501

3

N.Rajini,

J.T.Winowlin Jappes,

S.Rajakarunakaran,

P.Jeyaraj,

C.Bennet.

Effect of MMT Nanoclay on

Temperature Dependence Mechanical

Properties of Naturally Woven

Coconut Sheath/ Polyester composite,

32(11) 811–822

Journal of

reinforced

Plastics and

Composites

1.188

4

T.P.Sathishkumar,

P.Navaneethakrishn

an

S.Shankar,

R.Rajasekar, and

N.Rajini.

Characterization of natural fiber and

composites – A review, 32(19) 1457–

1476

Journal of

Reinforced

Plastics and

Composites

1.188

5

N.Rajini,

J.T.Winowlin Jappes,

S.Rajakarunakaran,

C.Bennet.

Effect of Chemical Modifications and

MMT nanoclay addition on Transport

Phenomena of Naturally Woven

Coconut Sheath/ Polyester

Nanocomposite, Vol. 31, No. 8,

(2013), 1074−1086

Chinese Journal

of Polymer

Science

1.835

6

G.Manikandan,

M.Uthayakumar

S.Aravindan.

Machining and Simulation studies of

bimetallic pistons, (2013) 66:711–720

International

Journal of

Advanced

Manufacturing

Technology

1.779

7

N.Rajini,

J.T.Winowlin

Jappes,

S.Rajakarunakaran,

M.Prabhu,

C Bennet.

Influence of MMT Nanoclay on

Impedance Spectroscopy Analysis of

Naturally Woven Coconut Sheath /

Polyester Hybrid composite. DOI:

10.1002/APP.39149, 3746-3756.

Journal of

Applied Polymer

Science

1.600

8

S.Rajesh,

S.Rajakarunakaran,

R.Sudhkarapandian.

Optimization of the Red Mud -

Aluminum Composite in the Turning

Process by the Grey Relational

Analysis with Entropy, DOI:

10.1177/0021998313494914

Journal of

Composite

Material

1.257

9

N.Rajini,

J.T.Winowlin Jappes,

S.Rajakarunakaran,

P.Jeyaraj.

Dynamic Mechanical Analysis and

Free vibration behavior in Chemical

Modifications of Naturally woven

coconut sheath/MMT clay reinforced

Journal of

Composite

Materials

1.257

hybrid polymer Composite, 47(24)

3105–3121

10

N.Rajini,

J.T.Winowlin Jappes,

B.Suresha,

S.Rajakarunakaran,

I.Siva,

N.Azhagesan.

Effect of organically modified

montmorillonite clay on wear behavior

of naturally woven coconut sheath /

polyester reinforced composite, 2014,

Vol. 228(5) 483–497

Journal of

Engineering

Tribology

0.916

11

S. Thirumalai

Kumaran,

M. Uthayakumar.

Investigation on the dry sliding friction

and wear behavior of AA6351-SiC-

B4C

hybrid metal matrix composites, DOI:

10.1177/1350650113508103

Journal of

Engineering

Tribology

0.916

12

V.Arumugaprabu,

V.Manikandan,

M.Uthayakumar.

Effect of red mud on the mechanical

properties of banana/ polyester

composites using design of

experiments”, Proceedings of the

Institution of Mechanical Engineers,

Vol. 8, 195–200, 2013

Journal of

Materials: Design

and Applications

0.746

13 K.Mayandi,

P.Jeyaraj.

Bending, buckling and free vibration

characteristics of FG-CNT-reinforced

polymer composite beam under non-

uniform thermal load, DOI:

10.1177/1464420713493720

Journal of

Materials Design

and Applications

0.746

14

P.Amuthakkannan.

V.Manikandan.

J.T.Winowlin

Jappes.

M.Uthayakumar.

Hybridization effect on mechanical

properties of short basalt / jute fibre

reinforced polyester composites, 2013;

20(4): 343–350

Science and

Engineering of

composite

Materials

0.579

15

I.Siva,

J.T.W Jappes,

P.Pitchipoo,

S.C.Amico,

E.R.Nagarajan,

N.Azhagesan.

Gray optimization of process

parameters of surface modification of

coconut sheath reinforced polymer

composites, 2013; 33(7): 665–672

Journal of

Polymer

Engineering

0.465

16

P.Amuthakkannan,

V.Manikandan,

J.TWinowlin

Jappes,

M.Uthayakumar

Influence of the moulding pressure and

fibre percentages on the mechanical

properties of the basalt fibre reinforced

polymer matrix composites, Vol. 8, 1–

7, 2014

Journal of

Advanced

Microscopy

Research

Scopus

Indexed

17

P. Amuthakkannan.

V.Manikandan.

JT.Winowlin

Jappes.

M.Uthayakumar.

Effect of fibre length and fibre content

on mechanical properties of short

basalt fibre reinforced polymer matrix

composites, 16 (2013) 107-117

Journal of

Materials Physics

and Mechanics

Scopus

Indexed

18

M.Uthayakumar,

S.ThirumalaiKumara

n

S. Aravindan.

Dry Sliding Friction and Wear Studies

of Fly Ash Reinforced AA-6351 Metal

Matrix Composites, Volume 2013,

Article ID 365602, 6 pages

Advances in

Tribology

Scopus

Indexed

19 S.Rajesh, MOORA-Based Tribological Studies Advances in Scopus

S. Rajakarunakaran,

R.Suthakarapandian

P.Pitchipoo.

on Red Mud Reinforced Aluminum

Metal Matrix Composites, Volume

2013, Article ID 213914, 8 pages

Tribology Indexed

20

P.Ganesan,

S.Rajakarunakaran,

M.T.Sambandam,

D.Devaraj.

Estimation of energy and carbon

saving potential in industrial lighting

system, Vol. 768 (2013) pp 272-279

Advanced

Materials

Research

Scopus

Indexed

21

V.Arumugaprabu,

V.Manikandan,

M.Uthayakumar.

Effect of red mud on the mechanical

performance of Sisal and pineapple

fibre reinforced composites, 227(2)

143–155

Journal of

Advanced

Microscopy

Research

Scopus

Indexed

22

S.Bathrinath,

S.Saravanasankar,

S.G.Ponnambalam,

B.K.V.Kannan.

Bi-objective optimization in Identical

Parallel Machine Scheduling Problem,

SEMCCO 2013, Part I, LNCS 8297,

pp. 377–388, 2013.

Journal of

Advanced

Microscopy

Research

Scopus

Indexed

23

V.Narasiman,

S.Jeyakumar,

M.Mani.

Optimizing the compression ratio of

diesel fuelled C.I Engine in sardine oil

ethyl ester. Volume 7, Number 3

(2013), pp 463-467.

International

Review of

Mechanical

Engineering

Scopus

Indexed

24 P. Jeyaraj,

I. Rajkumar.

Static Behavior of FG-CNT Polymer

Nano Composite Plate Under Elevated

Non-Uniform Temperature Fields, 64 (

2013 ) 825 – 834

Procedia

Engineering Elsevier

RESEARCH PUBLICATIONS-2012

S.N

o.

Names of the

authors Title, year, vol, pages Journal Name

Impact

factor, if

any

1.

P.Amuthakkannan,

V.Manikandan,

J.T.Winowlin

Jappes,

Suresh Kumar.

Investigation of the Effect of

Surface Modifications on the

Mechanical Properties of Basalt

Fibre Reinforced Polymer

Composites. 43 (2012) 812–818

Journal of

Composite Part:

B.

2.983

2.

R.Saidur,

M.T.Sambandam,

M.Hasanuzzaman,

D.Devaraj,

S.Rajakarunakaran

M.D.Islam.

An energy flow analysis in a

paper-based industry,

DOI 10.1007/s10098-012-0462-9

Clean

Technologies and

Environmental

Policy.

1.93

3.

S.Rajesh,

D.Devaraj ,

R.Sudhakara

Pandian,

S.Rajakarunakaran

Multi response optimization of

machining parameters of Red mud

based aluminium metal matrix

composite in turning process,

(2013) 67:811–821

International

journal of

Advanced

manufacturing

technology

1.779

4.

M.Victor Raj,

S.Saravanasankar,

S.G.Ponnambalam.

Particle Swarm optimization

algorithm to maximise assembly

efficiency, (2012) 59:719–736

International

Journal of

advanced

Manufacturing

technology

1.779

5.

N.Rajini,

J.T.Winowlin

Jappes,

S.Rajakarunakaran

I.Siva.

Tensile and Flexural Properties of

MMT clay/ Polyester nano

composite using Robust design

concepts, Vol. 2 (2012) pp 87-101

Nano Hybrids. 1.644

6.

M.Uthayakumar,

G.Prabhaharan

S.Aravindan,

J.V.Sivaprasad.

Influence of cutting force on

bimetallic piston machining by

CBN tool, 27: 1078–1083, 2012

Journal of

Material and

Manufacturing

Process

1.629

7.

J.T.Winowlin

Jappes,

I.Siva

N.Rajini.

Fractography Analysis of

Naturally Woven Coconut Sheath

Reinforced Polyester Composite:

A Novel Reinforcement, 51: 419–

424, 2012

Polymer –

Plastics

Technology and

Engineering

1.481

8. .

P. Pitchipoo,

P. Venkumar,

S.Rajakarunakaran

A distinct model for evaluation

and selection of supplier for an

electro plating industry, Vol. 50,

No. 16, 15 August 2012, 4635–

4648

International

Journal of

Production

Research

1.477

9.

N Rajini,

JT Winowlin

Jappes,

Dynamic mechanical analysis and

free vibration behavior in

chemical modifications of coconut

Journal of

Composite

materials

1.257

S.Rajakarunakara,

P.Jeyaraj

sheath/nano-clay reinforced

hybrid polyester composite,

47(24) 3105–3121

10.

S. Anand,

S.Saravanasankar,

P. Subbaraj

A multiobjective optimization tool

for very large scale integrated

Nonslicing floorplanning, DOI:

10.1002/cta.829

International

journal of circuit

theory and

applications

1.254

11.

R.Saidur,

M.T.Sambandam,

M.Hasanuzzaman,

D.Devaraj,

S.Rajakarunakaran

.

An analysis of actual energy

savings in an Indian cement

Industry through energy efficiency

index, 9: 829–840, 2012

International

Journal of Green

Energy.

1.215

12.

N.Rajini,

J.T.Winowlin

Jappes,

S.Rajakarunakaran

P.Jeyaraj

Mechanical and Free Vibration

Properties of MMT clay dispersed

with Naturally Woven Coconut

Sheath Composite, 31(20) 1364–

1376

Journal of

reinforced

Plastics and

Composites

1.188

13.

P.Amuthakkannan,

V.Manikandan,

J. T. Winowlin

Jappes,

M. Uthayakumar

Influence of stacking sequence on

mechanical properties of

Blast/Jute fibre reinforced

polymer hybrid composites, 2012;

32: 547–554

Journal of

polymer

engineering

0.465

14.

N.Rajini,

J.T.Winowlin

Jappes,

S.Rajakarunakaran

I.Siva.

“Effect of Processing Variables on

the Mechanical Properties of

Montmorillonite Clay/Unsaturated

Polyester Nanocomposite Using

Taguchi based Grey Relational

Analysis, 2012; 32: 555–566

Journal of

Polymer

Engineering

0.465

15.

Jerin Leno,

S.Saravanasankar

S.G.Ponnambalam.

Integrated Layout Design

Approach for Cellular

Manufacturing System

Environment, 12(23), 2411-2417.

Journal of

Applied Sciences

Scopus

Indexed

16.

S.Rajesh,

S.Rajakarunakara,

R.Sudhakara

Pandian.

Modeling and Optimization of

Sliding Specific Wear and

Coefficient of Friction of

Aluminium Based Red Mud Metal

Matrix Composite Using Taguchi

Method and Response Surface

Methodology, 15 (2012) 150-166

Materials Physics

and Mechanics

Scopus

Indexed

17.

V. Arumuga

Prabu,

V.Manikandan,

M.Uthayakumar,

S.Kalirasu

Investigations on the mechanical

properties of red mud filled sisal

and banana fiber reinforced

polyester composites, 15 (2012)

173-179

Materials Physics

and Mechanics

Scopus

Indexed

18.

V.Arumugaprabu,

V.Manikandan,

M.Uthayakumar.

Friction and dry sliding wear

behavior of redmud filled banana

fibre reinforced unsaturated

polyester composites using

Taguchi approach, 15 (2012) 34-

Materials Physics

and Mechanics

Scopus

Indexed

45

19.

V.Arumugaprabu,

M.Uthayakumar,

V.Manikandan.

Investigation of the Mechanical

Properties on Redmud filled

polyester banana composites using

grey relational technique, 14

(2012) 57-63

Materials Physics

and Mechanics

Scopus

Indexed

20.

V.Narasiman,

S.Jeyakumar,

M.Mani

Effect of performance and

emission characteristics on methyl

esters of sardine oil fuelled in

diesel engine with various blends.

Volume 2, Number 1, pp 17-26.

International

journal of

Mechanical

Engineering

Research and

Development

Scopus

Indexed

21.

V.Narasiman,

S.Jeyakumar,

M.Mani,

K.Rajkumar.

Impact of combustion on ignition

delay and heat release curve of a

single cylinder diesel engine using

sardine oil as a methyl ester,

volume 3, Issue 3, pp150-157.

International

journal of

mechanical

engineering and

technology

Scopus

Indexed

RESEARCH PUBLICATIONS-2011

S.N

o.

Names of the

authors Title, year, vol, pages Journal Name

Impact

factor, if

any

1.

M.Thirugnanasamban

dam,

M. Hasanuzzaman,

R.Saidur, M.B.Ali,

S.Rajakarunakaran,

D. Devaraj,

N.A Rahim.

Analysis of electrical motors load

factors and energy savings in an

Indian cement industry, 36 (2011)

4307e4314

International

Journal of Energy 4.844

2.

N.Venkateshwaran,

A.ElayaPerumal,

A.Alavudeen,

M.Thiruchitrambalam

.

Mechanical and Water Absorption

Behavior of Banana/Sisal

Reinforced Hybrid Composites, 32

(2011) 4017–4021

Materials &

Design 3.501

3.

A.Alavudeen,

M.Thiruchitrambalam

, A.Atijayamani,

A.Elayaperumal,

N.Venkateshwaran.

Improving Mechanical Properties of

Eco-Friendly Polymer Hybrid

Composites, Vol. 7, No. 2, March

2011, pp.172-178.

International

Journal of

Performability

Engineering

2.668

4.

A.Sivasamy,

P.RajeshKanna,

V.Selladurai.

Jet Impingement cooling of a

horizontal surface in an unconfined

porous medium: mixed convection

regime, 54 (2011) 4127–4134

International

Journal of Heat

and

International

Mass Transfer,

2.383

5.

A.Athijayamani,

M.Thiruchitrambalam

,

J.T.Winowlin Jappes,

A.Alavudeen.

Effect of Fiber Content on

Mechanical Properties of Short

Roselle and Sisal Fiber Hybrid

Polyester Composite, Volume 1,

Issue 6, pp.58-62.

International

Journal of

Computer

Applications in

Technology

1.997

6. J.T.Winowlin Jappes,

I. Siva.

Studies on the Influence of Silane

Treatment on Mechanical Properties

of Coconut Sheath Reinforced

Polyester Composite, 50: 1600–

1605, 2011

Polymer-Plastics

Technology and

Engineering

1.481

7.

M.Victor Raj,

S.Saravanasankar,

S. G. Ponnambalam.

Maximising manufacturing system

efficiency for multi-characteristics

linear assembly by using particle

swarn optimisation in batch selective

assembly, Vol. 49, No. 21, 1

November 2011, 6491–6516

International

Journal of

production

research

1.477

8.

M.Victor Raj, S.

Saravanasankar,

S.G. Ponnambalam.

Genetic algorithm to optimize

manufacturing system efficiency in

batch selective assembly, (2011)

57:795–810.

International

Journal of

advanced

Manufacturing

technology,

1.46

9.

M.VictorRaj,

S. Saravanasankar,

S.G.Ponnambalam.

Optimisation of assembly tolerance

variation and manufacturing systems

efficiency by using genetic

algorithm in batch selective

assembly, (2011) 55:1193–1208

International

Journal of

advanced

Manufacturing

technology

1.46

10. M.VictorRaj,

S.Saravanasankar,

S.G. Ponnambalam.

Minimising clearance variation and

surplus parts in multiple

characteristics radial assembly

through batch selective assembly,

(2011) 57:1199–1222.

International

Journal of

advanced

Manufacturing

technology

1.46

11.

P.Paul Pandian,

S.Saravanasankar,

S.G.Ponnambalam,

S.Badrinth.

Secondary Population

implementation in multi-objective

evolutionary algorithm for

scheduling of FMS, (2011) 57:1143–

1154.

International

Journal of

advanced

Manufacturing

technology

1.46

12. I.Siva,

J.T.Winowlin Jappes.

Investigation on Coir

Sheath/Polyester Composites: Effect

of Moisture on Wear Properties.

Vol. 2, No 1, pp. 73-82.

International

Journal of

Advanced

Manufacturing

Systems

1.458

13. S.Anand,

S.Saravanasankar,

P.Subbaraj.

Customized Simulated Annealing

Based Decision Algorithms for

combinatorial Optimization in VLSI

Floor planning problems, (2012)

52:667–689

International,

Computational

Optimization and

Applications

1.317

14. S.Anand,

S.Saravanasankar,

P. Subbaraj.

A Multi-Objective Optimization tool

for VLSI Non-Slicing Floor

Planning, DOI: 10.1002/cta.829

International

journal of circuit

theory and

applications

1.254

15. A.Alavudeen,,

M.Thiruchitrambalam

, A.Athijayamani.

Clutch Plate Using Woven Hybrid

Composite Materials, Vol. 15(4), pp.

229-234.

International

Mater Res Innov 0.830

16.

I.JerinLeno,

S.Saravanasankar,

M.VictorRaj,

S.G.Ponnambalam.

Bi-criteria optimization in integrated

layout design of cellular

manufacturing systems using a

genetic algorithm, SEMCCO 2011,

Part I, LNCS 7076, pp. 323–331.

International

Lecture Notes in

Computer

Science

0.302

17. P.Pitchipoo,

P.Venkumar,

S.Rajakarunakaran

A Hierarchical Decision Support

System for Supplier Selection in

Process Industry, DOI:

AA112011001

International

Journal of

Automation and

Autonomous

System

0.134

18.

A.Alavudeen,

M.Thiruchitrambalam

, J.T.Winowlin

Jappes,

A.Athijayamani.

Investigation on the Effect of

Alkaline Treatment on Mechanical

Properties of Banana Fiber Polymer

Composite. Vol. 3, Nos. 5/6, pp.434-

442, 2011.

International

Journal of

Computer

Applications in

Technology

Scopus

indexed

19. N.Venkateshwaran,

A.Elayaperumal,

Review of Artificial Neural Network

and Taguchi Application in polymer

Reviews on adv

anced materials

Scopus

indexed

A.Alavudeen,

M.Thiruchitrambalam

.

matrix composites, 29 (2011) 100-

103

science

20.

A.Alavudeen,

M.Thiruchitrambalam

, N.Venkateshwaran,

A.Athijayamani.

Review of Natural Fiber Woven

Composite, 27 (2011) 146-150

Reviews on adv

anced materials

science

Scopus

indexed

21. P.Venkumar,

K.Chandra Sekar.

Design of Cellular Manufacturing

System Using Genetic Algorithm.

DOI: 10.4018/978-1-61350-047-

7.ch006

International

Journal of

Emerging

Technology in

Mechanical

Engg.

Scopus

indexed

22. M.Victor Raj,

S.Saravanasankar,

S.G.Ponnambalam.

Ant colony optimization to improve

precision of complex assembly,

CSIE 2011, Part I, CCIS 152, pp.

86–93.

Communications

in Computer and

Information

Science

Scopus

indexed

23.

M.Victor Raj,

S.Saravanasankar,

S.G.Ponnambalam.

A new approach to nullify surplus

parts in selective assembly, 2011

Vol.3, No.5/6 > pp.492 503

International

Journal of

computer aided

engineering and

technology

Scopus

indexed

24. I.Siva,

J.T.Winowlin Jappes.

Investigation on the Effect of

Hybridization and weathering

behavior of Natural Fiber Polymer

Composites, Vol. 3, Nos. 5/6, 2011

International

Journal of

Computer Aided

Engineering and

Technology

Scopus

Indexed

25. P.Pitchipoo,

P.Venkumar,

S.Rajakarunakaran.

Grey Decision Model for Supplier

Selection in Process Industry. Vol. 1,

No. 1-2, pp. 61-66.

International

Journal of

Operations

Systems and

Human Resource

Management

Scopus

Indexed

26.

P.Pitchipoo,

P.Venkumar,

K.Muthugurupackiam

S. Rajakarunakaran.

Modelling and Development of

Decision Model for Supplier

Selection in Process Industry, Vol. 3,

No 5/6, pp. 504-516.

International

Journal of

Computer Aided

Engineering and

Technology

Scopus

Indexed