Residential architectural guide - corp...Builders hardware 20-21 Table of ... 6 • Allegion • Architectural guide Convenient. Secure. Stylish. Experience keyless freedom with Schlage

Residential architectural guideRev. 5/15

2 • Allegion • Architectural guide

ElectronicsConnected locks Home automation

Schlage Connect™ 4

Electronic locks Schlage Touch™

deadbolts & locks 5 Keypad locks

FE285 handlesets 6-7

Mechanical locks Schlage deadbolts

& handlesets 8-9 Schlage knobs & levers 10 Schlage decorative collections 11 Schlage J Series 12-13

Multi-family Schlage programmable

electronic deadblt 14 Schlage electronic

interconnected lock 15 Multi-family readers

and credentials 16 Mechanical interconnected

locks 17 Mechanical deadbolts 18-19

Builders hardware 20-21

Table of contents

3

®

Door Preparation

Schlage connected locks use Z-Wave®, a wireless technology that makes your house smarter, safer, and far more convenient. When these locks are paired with a compatible Z-Wave® home automation system, homeowners can remotely control, manage, and monitor access to their home*.

ANSI A156.36-2010 (deadbolt only) BE469NX - Connect™ deadbolt with alarm n Grade 1n Autothrow deadbolt is activated from outside by pressing the

Schlage button n Deadbolt automatically retracted from outside by entering valid

user coden Key can be used to unlock as backup n Built-in Alarm Technology alerts home owners to potential

security threats

BE468NX - Connect™ deadbolt n Grade 2n Autothrow deadbolt is activated from outside by pressing the

Schlage button n Key can be used to unlock as backup

ANSI A156.2-2003 FE599NX - Connected keypad levern Grade 2n Locks manually operated from outside after entering valid user code

ANSI A156.36-2010 BE369NX - Connected keypad deadboltn Grade 2n Locks manually operated from outside after entering valid user code

* Home automation features are dependent upon the system provider Z-Wave is a registered trademark of Zensys Inc, and/or its subsidiaries

Residential electronic deadbolts and locksets

Connected deadbolts & levers

BE469NX Camelot (CAM)


Standard features / configurationsConnect™ deadboltBE469NX

Connected keypad deadbolt BE369NX

Connected keypad lever FE599NX

Certification: ANSI A156.36-2010 Grade 1

ANSI A156.36-2010 Grade 2

ANSI A156.2-2003 Grade 2

Backset: 2 3/8" or 2 3/4" 2 3/8" or 2 3/4" 2 3/8" or 2 3/4"

Strike: 1 1/8" x 2 3/4" round corners, strike reinforcer

1 1/8" x 2 3/4" round corners, strike reinforcer

1 5/8" x 2 1/4" radius corner, full lip, latch strike

Key & cylinder: 1 key, 5-pin, C keyway

2 keys, 5-pin, C keyway

2 keys, 5-pin, C keyway

Door thickness: 1 3/8" to 1 3/4"; thick door kit extends 1 7/8" to 2 1/2"

1 3/8" to 1 3/4" 1 3/8" to 1 3/4"

Product dimensions: (wxhxd)

ext: 3" x 4 3/4" x 1" int: 3" x 8" x 2"

ext: 3 1/8" x 5 1/2" x 2 1/8"int: 3 1/4" x 7 1/2" x 2 1/4"

ext: 6 7/8" x 3" x 2 3/4"int: 3 1/4" x 8 1/4" x 2 3/4"

Communications: 900 MHz (Z-Wave® RF)**

900 MHz (Z-Wave® RF)**

900 MHz (Z-Wave® RF)**

Operating temps: Ext: -35C to 66C Int: -10C to 49C

Ext: -30C to 66C Int: -10C to 49C

Ext: -30C to 66C Int: -10C to 49C

Battery: 4 AA 9V, 3AA 9V, 4AA

Codes: Pre-set, unique 6-digit programming code, 2 pre-set unique 4-digit user codes, 30 user code capacity (4-8 digits)

Pre-set, unique 6-digit programming code, 2 pre-set unique 4-digit user codes, 19 code capacity

Pre-set, unique 6-digit programming code, 2 pre-set unique 4-digit user codes, 19 code capacity

** Z-Wave is a registered trademark of Zensys Inc, and/or its subsidiaries. Warranty: 3 year electronics, limited lifetime mechanical and finish

FE599NX Camelot x Accent Lever

BE469NX Century(CEN)

BE468NX Century(CEN)


Door preparation

FinishesFunction 605 608 609 613 618 619 620 622 625 626 716BE469 Camelot • • • •BE469 Century • • • •BE468 Camelot • • • •BE468 Century • • • •BE369 Camelot • • •FE599 Camelot

x Accent • • •



BE Series Schlage Touch™ non-connected deadbolts

FE Series Schlage Touch™ non-connected levers

BE375 Series Camelot

FE695 Series Camelot x Accent

BE375 Series Century

FE695 Series Camelot x Flair

FE695 Series Century x Broadway

FE695 Series Century x Latitude

FE695 Series Century x Merano

BE-Series Schlage Touch™ deadbolts Finishes availableFunction Style/Design 605 608 609 618 619 625 626 505 716 613 620 621 622BE375 Camelot • • • • • • •BE375 Century • • • • •

FE-Series Schlage Touch™ lever locks Finishes availableFunction Style/Design 605 608 609 618 619 625 626 505 716 613 620 621 622(CAM) Camelot xFE695 Camelot x Accent • • • • • • •FE695 Camelot x Flair • • • • • •(CEN) Century xFE695 Century x Broadway • • • • •FE695 Century x Elan •FE695 Century x Latitude • • • • •FE695 Century x Merano • • • • •

5

With Schlage Touch™, no key means there’s nothing to lose, nothing to fiddle with, and—for intruders—nothing to pick. All in a slim profile that’s every bit as sleek as it is strong

ANSI/BHMA Grade 2 Schlage Touch™ Locks

BE375 – Touchscreen deadboltn Deadbolt retracted by entering valid user code then rotating

outside thumbturn, or by inside thumb turnn Deadbolt thrown by using outside thumbturn after pressing

Schlage button, or by inside thumbturn

FE695 – Touchscreen levern Unlocked by valid user code from outsiden Inside knob or lever always unlockedn Flex Lock: adjust inside thumb turn to keep door locked

or unlocked

Latches and strikesFE Keypad leversLatches16-086 Dual option (round, drive in) STANDARD16-207 Square corner16-211 Triple option (round, square, drive In)16-203 UL Listed square corner with firecup16-204 UL Listed round corner with firecupStrikes10-027 Round corner full lip - STANDARD10-001 Square corner T Strike10-026 Square corner full lip10-058 Circular adjustable10-063 Dual strikes (round & square full lip)10-025 ANSI square corner

BE Keypad deadbolts

Latches12-321 Dual option (round, drive in) STANDARD12-288 Square corner12-287 Triple option (round, square, drive in)12-294 UL Listed square corner with firecup12-397 UL Listed round corner with firecupStrikes10-116 Round corner strike with reinforcer - STANDARD10-092 Round corner full lip strike10-094 Square corner strike with reinforcer

Standard features / configurationsSchlage Touch™ electronic deadbolt BE375

Schlage Touch™ electronic lever FE695

Certification ANSI/BHMA Grade 2 ANSI/BHMA Grade 2

Product dimensions (inches) (w x h x d)

3 x 5.4 x 5.2 3 x 5.4 x 7.9

Weight 3.4 lbs 4.5 lbs

Warranty 3 year electronics, limited lifetime mechanical and finsh

3 year electronics, limited lifetime mechanical and finsh

Battery 9V battery (1) 9V battery (1)

Latch throw 1" 1/2"throw, 7/8" housing diameter

Cylinder None None

Door thickness 1 3/8" to 1 3/4"thick door kit extends1 7/8" to 2 1/2"

1 3/8" to 1 3/4"no thick door kit

Cross bore 2 1/8" 2 1/8"

Latch faceplate size

1" x 2 1/4" Dual Option - Round Corner + Drive-in

1" x 2 1/4" Dual Option - Round Corner + Drive-in

Latch/backset 2 3/8" OR 2 3/4" adjustable 2 3/8" OR 2 3/4" adjustable

Latch faceplate options

Deadbolt latch, round, square & drive-in

Dead latch, round, square & drive-in

Strike 1 1/8" x 2 3/4" round corners, strike reinforce

1 5/8" x 2 1/4", round corner, full lip latch strikes

Keys None None

Codes 2 pre-set unique 4-digit user codes, storage of up to 19 user codes

2 pre-set unique 4-digit user codes, storage of up to 19 user codes

Operating temperatures

Outside lock body (exterior mounted): -35C to 66C Inside lock body (interior mounted): -10C to 50C

Outside lock body (exterior mounted): -35C to 66C Inside lock body (interior mounted): -10C to 50C

Door preparation

®

Door Preparation

BE375 FE695


Convenient. Secure. Stylish.Experience keyless freedom with Schlage keypad locks, revolutionary products that bring security to a new level. Our keypad locks combine the convenience of keyless entry with the superior quality you expect from Schlage.

Security and qualityn Grade 2 ANSI/BHMA certifiedn Patented commercial-grade clutching motor drive; tested to one million cyclesn Vandal-resistant, free-spinning deadbolt turn and clutching

knob/lever designn Code control; 6-digit programming code required to add and delete

user codesn Warning sounds after four incorrect codes entered; keypad disabled

for 30 secondsn Mechanical key override; patent pending

Conveniencen Convenient keyless access; no keys to hide, lose or forgetn Fits standard door prep; no additional mounting holes requiredn Pre-set with random 6-digit programming code and two random

4-digit user codes; no programming requiredn 19-user code capacity; 10,000 user code combinationsn Easily programmed right at the keypad; no need to remove inside

escutcheonn Blue LEDs illuminate the keypad on demand for evening usen Locks can be re-keyed to match existing locks n 9-volt alkaline battery included, low battery warning and average

3-year lifen Easy access to replace batteryn FE595 model with Flex-lock feature easily switches between lock

and passage modesn FE575 model with Auto-lock feature locks automatically


BE and FE Series Keypad deadbolt

BE365 Series Camelot BE365 Series Camelot BE365 Series Camelot BE365 Series Camelot BE365 Series Plymouth

FE285 Series Camelot FE285 Series Plymouth

BE365 Series Plymouth BE365 Series Plymouth

FE285 Series Camelot

®

Door PreparationDoor preparation

Specifications

Applications: Residential single- and multi-family doors

Keying: 5-pin tumbler with two keys per lock; stock locks are keyed 5-pin

Door range: 1 3/8" to 1 3/4" thick (35mm - 44mm) standard; thick door kit available on BE365

Backset: Universal latches and deadbolts fit 2 3/8" (60 mm) or 2 3/4" (70 mm) backsets

Warranty: 3 year electronics, limited lifetime mechanical and finish

FinishesFunction 605 608 609 613 618 619 620 622 625 626 716BE365 Camelot • • • • • • • •BE365 Plymouth • • • • • • • •FE285 Camelot • • • • • • • • •FE285 Plymouth • • • • • • • • •FE285 available in standard handleset and knob and lever finish options, see page 9 & 10.

Use any F series knob or lever based on finish availability.

7

BE Series and FE Series residential keypad deadbolts and locksets

Keypad entry lock

FE595 Series Camelot x Accent lever

FE575 Series Camelot x Accent lever

FE575 Series Plymouth x Elan lever

FE595 Series Camelot x Georgian knob

FE595 Series Plymouth x Plymouth knob

FE575 Series Plymouth x Plymouth Knob

FE595 Series Plymouth x Flair lever

FE595 - Keypad Entry with Flex-Lockn Flex-locking, switch between unlocked or automatic

re-lockingn Unlocked by valid user code from outsiden Inside knob or lever always unlockedn Key can be used to unlock as back-up

FE575 - Keypad Entry with Auto-Lock n Auto-locking, automatically re-locks after 5 secondsn Unlocked by valid user code from outsiden Inside knob or lever always unlockedn Key can be used to unlock as back-up

General: n Minimum 5 1/2" (140mm) center-to-center distance between

cross bore holesn 9-volt battery included with average three-year battery lifen Silicone rubber, wear-resistant buttons with LED backlightn ANSI A 156.5-2001 Grade 2 auxiliary locks, ANSI A 156.2-2003

bored locks and latchesn FCC Part 15n CE markn BE365 and FE285 available UL Listed (box pack only)

FinishesBE and FE Series 605 608 609 613 618 619 620 622 625 626 716BE365 Camelot • • • • • • • •BE365 Plymouth • • • • • • • •FE595 Camelot

x Accent • • • • • • • •FE595 Camelot

x Georgian • • •FE595 Plymouth

x Flair • • • • • • • •FE595 Plymouth

x Plymouth •FE575 Camelot

x Accent • • • • • • • •FE575 Plymouth

x Flair • • • • • • • •FE575 Plymouth

x Elan •FE575 Plymouth

x Jazz •FE575 Plymouth

x Plymouth •

Standard features / configurationsWarranty Limited lifetime mechanical and finish warranty,

3 year electronics warranty

Keypad lock latch 1" x 2 1/4" (25mm x 57mm) latch with radius corner faceplate, 7/8" (22mm) housing diameter, 1/2" (13mm) throw spring latch with square corner and circular drive-in faceplates

Keypad deadbolt latch 1" x 2 1/4" (25mm x 57mm) radius corner faceplate, 1" (25mm) housing diameter, requires 1" (25mm) edge bore, 1" (25mm) throw with square corner and circular drive-in faceplates

Latch strikes 1 5/8" x 2 1/4" (41mm x 57mm), square and radius corner, full lip

Deadbolt strike 2 3/4" (70mm), round corner, latch strike, metal strike reinforcer

Cylinder 5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD)


B Series mechanical deadbolts

B60, B62R SeriesGrade 1 for high-traffic residential or commercial use.Shown: B60 single cylinder

Standard features n Extra security with a full 1" (25mm) throw deadbolt with a

concealed hardened steel roller to prevent cutting or sawing the boltn 5-minute, 3-step installationn Anti-pick shield protects against hammer and crow bar attacksn Available in single and double cylindern Available with full-sized interchangeable core (B60R, B62R)n Limited lifetime mechanical and finish

Finishes

Series 505 605 606 608 609 612 613 618 619 620 621 622 625 626 643/716US3 US4 US5 US10 US10B US15 US15A US17A US19 US26 US26D US11

B60 • • • • • • • • • • • • 716

B62R • • • • • • 716

Specifications

Certifications Exceeds ANSI/BHMA certified A156.5 - 2001, Grade 1, UL Listed for 3-hour fire door (Grade 2 with FSIC)

Applications Medium-traffic deadbolt, Grade 1 residential or commercial, exterior, new construction and retrofit applications

Deadbolt 1" x 2 1/4" (25mm x 57mm), square and round corner faceplate included, 1" (25mm) housing diameter, 1" (25mm) throw

= Medium-traffic applications

= BHMA certified

= ANSI tested = Helps meet LEED certification

= High-traffic applications

= UL and/or cUL Listed

®


9

Residential F Series handlesets

716 Aged bronze

608 Satin brass

620 Antique pewter

625 Bright chrome

622 Matte black

621 Distressed nickel

626 Satin chrome

505/605 Bright brass

618 Polished nickel

619 Satin nickel

613 Oil rubbed bronze

609 Antique brass

Residential lock finishes

1"25�mm

*4" minimum�102mm1"�dia.

25�mm

5-1/2" center to center is ideal prep*

Door preparation

Two piece handleset

Addison PlymouthGreenwich WakefieldCamelot CenturyBrookshire

Finishes

Handlesets 605 608 609 613 618 619 620 621 622 625 626 716Addison • • • • • • • •Brookshire • • • • •Camelot • • • • • • • • •Century • • • • • • • •Greenwich • • • • • •Plymouth • • • • • • • • •Wakefield • • • • • • • • • •

= Helps meet LEED certification

Standard featuresn Grade 1 highest residesntial security ratingn Limited lifetime mechanical and finish warranyn Finishes on latches, strikes, and screws match finish

on grip handlesetn Adjustable throughbolt can move up and down

1-1/2" to fit a variety of pre-existing holes


Residential F Series knobs & levers

Standard featuresn Limited lifetime mechanical and finish warrantyn Field-reversible levers on privacy, passage and keyed functionsn Key-removable outside knobs or levers for easy cylinder

re place mentn Meets 400,000 cycle ANSI Grade 2 requirementsn Concealed screws on Andover and Greyson style roses

Latches and strikesLatches: 1" x 2 1/4" (25mm x 57mm), 1/2" (13mm) throw standard. Dual option faceplates, including 1 1/8" (29mm) round corner and circular drive-in, are standard for passage and privacy functions. Square corner faceplates available.

Strikes: Full lip, 1/4" (6mm) radius corner, 1 5/8" x 2 1/4" (41mm x 57mm), 1 1/8" (29mm) lip, #10-027, standard. Optional strikes: full lip; square corner; circular drive-in, ANSI 1 1/4" x 4 7/8" (32mm x 124mm), 1 3/16" (30mm) lip. UL Listed locks are fur nished with #10-001 T strike, 1 1/8" x 2 3/4" (29mm x 70mm), 1 1/8" (29mm) lip (also available with standard product).

2-1/4"57 mm

4-1/16"104 mm

2-3/4"70 mm

AvantiAccent ElanAvila CallingtonBroadway ChampagneBirmingham

Specifications

Applications Residential single-family and multi-family use

Certifications ANSI A156.2, 1996, Series 4000 Grade 2. UL Listed locks for 3-hour fire doors are furnished with #10-001 T strike, 1 1/8" x 2 3/4" (29mm x 70mm), 1 1/8 (29mm) lip (also available with standard product). Assembled to order when specified with “F” suffix. Example: F5IF

Exposed trim Levers are plated to match finishes indicated.

Keying 5-pin tumbler C keyway with two keys. All F51A functions offer interior emergency exit feature.

Door range 1 3/8" to 1 3/4" (35mm to 44mm) standard.

Backset Fits either 2 3/8" (60mm) or 2 3/4" (70mm) backset.


Flair ManhattanJazz Latitude Sacramento St. AnnesMerano

2-5/8"66 mm

4"102 mm

2-3/4"70 mm

Plymouth

2-5/16"59 mm

2-3/32"53 mm

2-3/4"70 mm

Georgian

2-5/16"59 mm

2-3/32"53 mm

2-3/4"70 mm

OrbitBell Bowery SienaAndover

2-11/32"60 mm

2-1/8"54 mm

2-3/4"70 mm

11

Residential decorative trim

Decorative CollectionsOur exceptional collections are just the beginning of the expanded choices available both now and in the future — paired with lever and knob designs and finishes in a generous number of combinations to meet the style and security needs of this demanding market:

n Inspired design collections ranging from traditional to contemporaryn Numerous distinctive finishes to choose fromn Pair with your choice of complementing Schlage handlesetsn Solid die-cast construction for durability

Brookshire collection

Addison collection

Camelot collection

Wakefield collection

Century collection

Greenwich collection

Andover collection*

1"25 mm

Door Preparation

*Features concealed screws

Finishes

Knobs 605 608 609 613 618 619 620 621 622 625 626 716Andover • • • • • • • • Bell • • •Bowery • • • • • •Georgian • • • • • • • •Orbit • • • • • • •Plymouth • • • • • • • • •Siena • • • • • • • • •LeversAccent • • • • • • • • • • • •Avanti • • • • • • •Avila • • • • •Birmingham • • •Broadway • • • • •Callington • • • • • • • • • Champagne • • • • • • • • Elan • • • • • Flair • • • • • • • •Jazz • • • •Latitude • • • • • •Manhattan • • • •Merano • • • • •Sacramento • • • • • St. Annes • • • • • • • •

Knobs and levers - Decorative Collection

605 608 609 613 618 619 620 621 622 625 626 716Addison • • • • • • • •Andover • • • • • • • • •Brookshire • • • • •Camelot • • • • • • • • • •Century • • • • • •Greenwich • • • • •Greyson • • • • • •Wakefield • • • • • • • • • •

Deadbolts - Decorative Collection

505 605 608 609 613 618 619 620 621 622 625 626 716Addison • • • • • • •Brookshire • • •Camelot • • • • • • Century • • • • • •Greenwich • • • • •Wakefield • • • • • • • •


Greyson collection*

4"102 mm

2-27/32"72 mm

1-5/8"41 mm

2-3/4"69 mm

23/32"18mm

3/4"19 mm

4-13/16"107 mm

2-15/16"74 mm

4-23/32"120 mm

2-13/16"71 mm

1-19/32"40 mm

4-1/8"105 mm

2-13/16"71 mm

1-19/32"40 mm

3-3/4"95 mm

2-13/16"71 mm

1-3/32"28 mm

2-23/32"69 mm

23/32"18mm

4"102 mm

2-27/32"72 mm

1-19/32"41 mm


Residential J Series

Grade 3 Handleset/deadbolt designs

JD60 JD Series single cylinder

Barcelona

11-7/8"302 mm

2-7/16"62 mm

11-7/8"302 mm

2-7/16"62 mm

Paris

JD80 JD Series one-sided deadbolt

JD81 JD Series one-sided deadbolt w/ exterior plate

Latches and strikesLatches: 1" x 2 1/4" (25 mm x 57 mm), 1/2" (13 mm) throw standard. Dual option faceplates including 1 1/8" (29 mm) round corner and circular drive-in are standard for passage and privacy functions. Keyed functions also come with 1 1/8" (29 mm) square corner faceplates standard, in addition to round corner and circular drive-in. 1 1/18" (29 mm) faceplate adaptors available.

Strikes: Full lip, 1 5/8" x 2 1/4" (41mm x 57mm), 1 1/8" (29mm) lip, #10-026, standard. Optional strikes: full lip, 1/4" (6mm) radius round corner; circular drive-in, ANSI 1 1/4" x 4 7/8" (32mm x 124mm), 1 3/16" (30mm) lip. UL Listed locks are fur nished with #10-001 T strike, 1 1/8" x 2 3/4" (29mm x 70mm), 1 1/8" (29mm) lip (also available with standard product).

2-1/8"54 mm

1"25 mm

1" dia.25 mm

2-3/8"60 mm

2-1/4"57 mm

1-1/8"29�mm

1"�dia. 25mm2 holes

5-1/2" 140mm

Finishes

Handlesets 605 608 609 618 619 620 622 625 630 716Barcelona • • • • • • •Paris • • • • • •DeadboltsJD60 • • • • • • •JD80 • • • • •JD81 • • • •*Discontinued; available while supplies last

Door preparation

Handleset specifications


Certifications ANSI A156.5, 2001, Grade 3.

Exposed trim Handlesets are zinc-based; plated to match finishes indicated.

Keying Schlage C keyway with two brass keys. Locks are keyed 5-pin.

Door Range 1 3/8" to 1 3/4" (35mm to 44mm) standard.

Backset Universal latch standard, fits either 2 3/8" (60mm) or 2 3/4" (70mm) backsets.

Warranty Limited lifetime mechanical warranty, five-year finish warranty.

UL Listing Single cylinder deadbolt/handleset available with UL Listing - box pack only.

Deadbolt specifications


Certification ANSI A156.5, 2001 Grade 3.

Exposed trim Wrought brass or bronze.

Keying Schlage C keyway with two brass keys. Locks are keyed 5-pin.


Backset Universal latch standard, fits either 2 3/8" (60mm) or 2 3/4" (70mm) backsets.

Warranty Limited lifetime mechanical warranty, five-year finish warranty.

UL Listing Single cylinder deadbolt product available with UL Listing - box pack only.


See templates.

13

Seville Solstice

Standard featuresn Limited lifetime mechanical warranty, five-year finish warrantyn Schlage C keyways can be keyed to Schlage locks for one-key convenience

Latches and strikesLatches: 1" x 2 1/4" (25 mm x 57 mm), 1/2" (13 mm) throw standard. Dual option faceplates, including 1 1/8" (29 mm) round corner and circular drive-in, are standard for passage and privacy functions. Keyed functions also come with 1 1/8" (29 mm) square corner faceplates standard, in addition to round corner and circular drive-in. 1 1/8" (29 mm) faceplate adaptors available.

Strikes: Full lip, 1 5/8" x 2 1/4" (41mm x 57mm), 1 1/8" (29mm) lip, #10-026, standard. Optional strikes: full lip, 1/4" (6mm) radius round corner; circular drive-in, ANSI 1 1/4" x 4 7/8" (32mm x 124mm), 1 3/16" (30mm) lip. UL Listed locks are fur nished with #10-001 T strike,1 1/8" x 2 3/4" (29mm x 70mm), 1 1/8" (29mm) lip (also available with standard product).

LaSalle 2-7/8"73 mm

4"102 mm

2-5/8"67 mm

Byron

2-5/8"67 mm

2"51 mm

2-1/2"63 mm Corona

2-7/15"63 mm

2"51 mm

2-5/8"67 mm

Dover

4-3/8"111 mm

2-7/8"73 mm

2-5/8"67 mm

Dover, Marin and Torino lever designs are non-handed. LaSalle and Seville are reversible.

Marin Torino2-7/8"73 mm

4"102 mm

2-5/8"67 mm

4"102 mm

2-5/8"67 mm

2-3/8"60 mm

Stratus2-5/16"59 mm

2-3/16"56 mm

2-3/4"70 mm

Door preparation

2-1/8"54 mm

1"25 mm

2-1/4"57 mm

2-3/8"60 mm

1" dia.25 mm

See templates.

Residential J Series

Grade 3 Knob/lever designs

Finishes

Knobs 605 609 619 620 625 626 630 716Byron • • •Corona • • • • • • •Stratus • • • • • •Dover • l •LeversLaSalle • • • •Marin • •Torino • • • l • • •Seville • • • • •Solstice • • • •l Discontinued; available while supplies last

Specifications


Certifications ANSI A156.2, 1996, Series 4000 Grade 3.

Exposed trim Levers are zinc-based; plated to match finishes indicated. Knobs are brass or stainless steel; plated to match finishes indicated.

Keying 5-pin tumbler Schlage C keyway with two brass keys.


Backset Universal latch standard, fits either 2 3/8" (60mm) or 2 3/4"(70mm) backsets.

UL listing Knobs/levers available with UL listing. Box pack only.



Multi-family programmable electronic deadbolt

BE367 Series Camelot

BE367 Series Plymouth

Specifications

Latch 1" x 2 1/4" (25mm x 57mm) radius corner faceplate; 1" (25mm) housing diameter requires 1" (25mm) edge bore; 1" (25mm) throw with Triple Option™ square corner, radius corner and circular drive-in faceplates

Strikes 1 1/8" x 2 3/4" (29mm x 70mm), square corner, strike reinforcer

Backset Adjustable backset, fits 2 3/8" to 2 3/4" (60mm - 70mm) backsets

Cylinder 5-pin, keyed 5-pin, C keyway, keyed different (KD)

Door range 1 3/8" to 1 3/4" (35mm - 44mm), thick door kit available for up to 2 1/2" (64mm)

Keys 5-pin, C-section

Hole distance Minimum 5 1/2" (140mm) center-to-center distance between cross bore holes

Battery 9-volt battery included

Construction All-metal chassis and escutcheons

Button Silicone rubber, wear-resistant with LED backlight

Certifications Available 3 hr. and 20 min. UL Listed; A 156.5-2001 Grade 2 auxiliary locks or Grade 2 ANSI/BHMA certified; FCC Part 15; CE mark

Benefitsn Eliminates deadbolt replacement and re-keying costsn Reduces key management costsn Prevents unauthorized key duplicationn Improves building securityn Increases property valuen Potential new revenue streams

Standard featuresn Time and date controlled accessn Easy to install – fits on standard residential door prepsn Vandal resistant free-spinning deadbolt turnn Up to 500 usersn Audit trail reports up to 1,000 eventsn Battery powered – no wiring requiredn Average 3-year battery lifen Low battery warningn iButton credential required (sold separately)n Hidden back-up mechanical key override

Door preparation

2-1/8"54 mm

1"25 mm

2-1/4"57 mm

2-3/8"60 mm

1" dia.25 mm

Finishes

716 Aged bronze

620 Antique pewter

625 Bright chrome

626 Satin chrome


619 Satin nickel

613 Oil rubbed bronze

609 Antique brass

15

Multi-family electronic interconnect lock

FE210 F Camelot

Specifications

ANSI/BHMA Grade 2 certified

UL rating UL 3-hour rating available

Latch UL latch comes with 1" x 2 1/4" square and round corner face plans (square corner standard, round corner included in package. 1" edge bore required

Strikes 1 1/8" x 2 3/4" square corner deadbolt strikes and 2 1/4" x 1 5/8" square corner full lip latch strikes reinforcer. Dust box not included.

Backset Adjustable backset, fits 2 3/8" or 2 3/4" backsets

Levers All lever trim is non-handed and field reversible

Stile width Minimum 4 1/2" for 2 3/8" backset, minimum 5" stile for 2 3/4"

Return to door Saturn (SAT) and Neptune (NEP) are return to door code compliant

Cylinder 5-pin solid brass, layered 5-pin, C keyway, keyed different (KD)

Keys 5-pin, C section

Door range 1 3/8" to 1 3/4" standard. 1 3/4" to 2 optional. Must be specified.

Center to center Fits 4" or 5 1/2" center to center door preps

Battery 9V battery included

Credential Deadbolt is operated using iButton credential (sold separately)

Benefitsn Eliminates deadbolt replacement and re-keying costsn Reduces key management costsn Prevents unauthorized key duplicationn Improves building securityn Increases property valuen Potential new revenue streams

Standard featuresn Interconnect mechanism is adjustablen Lever trim is non-handed and field reversiblen Grade 2 n UL 3-hour rating available n Time and date controlled accessn Easy to install – fits on standard residential door prepsn Vandal resistant free-spinning deadbolt turnn Up to 500 usersn Audit trail reports up to 1,000 eventsn Battery powered – no wiring requiredn Average 3-year battery lifen Low battery warningn iButton credential required (sold separately)n Hidden back-up mechanical key override

Door preparation

2-1/8"54 mm

1"25 mm

2-1/4"57 mm

2-3/8"60 mm

1" dia.25 mm

Finishes

716 Aged bronze

625 Bright chrome

626 Satin chrome


619 Satin nickel

609 Antique brass


Credential readersn Accommodates interior, exterior, metal and metal installation environmentsn Recognizes most proximity credentials, magnetic stripe, proximity, and smart credentials including

aptiQ MIFARE Classic and MIFARE DESFire EV1 credentialsn FIPS 201-1 compliantn NFC compatiblen Quick-connect wiring harness for easy installationn Simple wiring - color scheme is identical to most readersn Easy-to-install mounting bracketn Tri-state LEDn Wiegand outputn Multiple reader cover color optionsn Limited lifetime warranty

Credentialsn User/resident credentials • Over three billion code combinations • Cannot be duplicatedn Programming credentials • Required for lock programmingn Construction credentials • Used during construction; operates all electronic locks that

haven’t been programmedn Vendor credentials • Used to allow temporary access to employees and vendors in

conjunction with the Schlage vendor access management system software with Schlage access software

IBF-110n Proximity Keyfob

• 125 KHz proximity technologyn iButton

• Durable stainless-steel packaging

• U nique factory programmed 64-bit registration number

• Momentary contact initiates identification

• Data transfer rate of up to 16.3kbps

IBF-120n Proximity Keyfob

• 125 KHz proximity technologyn iButton

• The iButton credential is a read-write credential

• When used with a preferred third-party software provider, the Schlage Programmable Electronic Deadbolt (BE367) and Schlage Electronic Interconnect Lock (FE210) are non-touring capable with the iButton credential

• Durable stainless-steel packaging

• Unique factory programmed 64-bit registration number

• Momentary contact initiates identification

• Data transfer rate of up to 16.3kbps

Multi-family readers and credentialsAll the tools you need to manage every opening in your building.

17

Mechanical interconnected locks

The CS210F mechanical interconnected locks provide panic-free, single motion egress and comply with the requirements of the National Fire Protection Association (NFPA) codes and local building codes.

To meet the demands of residents, the mechanical interconnect is available with several new features:n Both the CS210F accept a variety of commercial and all

residential levers, to provide never before available suiting options for our Schlage interconnected product line

n Available in split lever designs and finishesn Select levers are code-compliant with return to door

requirements and meet ADA requirementsn The interconnect mechanism is adjustable to 4 and 5 1/2 door

preparationsn Available with removable core and restricted keywaysn I/C core availabilityn Limited lifetime mechanical warranty

CS210-B500 CS210-B60 Interior Camelot

Interior Plymouth

Benefitsn Single motion egress meets life and safety code requirementsn Ideal for both new constuction and

renovation/aftermarket projectsn Easy to install, fits standard door preparations

Marketsn Apartment communitiesn Assisted living communitiesn Student housingn Light commercialn Single family condominiums and town homes

Finishes

Specifications

ANSI/BHMA Grade 2 certified

UL rating UL 3-hour rating is standard

Latch UL latch comes with 1" x 2 1/4" square and round corner face plans (square corner standard, round courner included in package. 1" edge bore required.

Strikes 1 1/8" x 2 3/4" square corner deadbolt strikes and 2 1/4" x 1 5/8" square corner full lip latch strikes reinforcer. Dust box not included.

Backset Adjustable backset, fits 2 3/8" or 2 3/4" backsets

Levers All lever trim is non-handed and field reversible

Stile width Minimum 4 1/2" for 2 3/8" backset, minimum 5" stile for 2 3/4"

Return to door Saturn (SAT) and Neptune (NEP) lever styles are return to door code compliant

RS210F cylinder 5-pin solid brass, layered 5-pin, C keyway, keyed different (KD)

CS210F cylinder 6-pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD), Keys are 6-pin, Everest S123 section.

Keys 5-pin, C section

Door range 1 3/8" to 1 3/4" standard. 1 3/4" to 2 optional. Must be specified

Center to center Fits 4" or 5 1/2" center to center door preps

Door preparation

2-1/8"54 mm

1"25 mm

2-1/4"57 mm

2-3/8"60 mm

1" dia.25 mm

716/643e Aged bronze

625 Bright chrome

626 Satin chrome


619 Satin nickel

609 Antique brass


B Series mechanical deadboltsB60 SeriesGrade 1 for high-traffic residential or commercial use.

B60R6 SeriesGrade 2 for medium-traffic commercial and residential use.

Shown: B60 single cylinder

Standard features n Extra security with a full 1" (25mm) throw deadbolt with a

concealed hardened steel roller to prevent cutting or sawing the boltn 5-minute, 3-step installationn Anti-pick shield protects against hammer and crow bar attacksn Available in single and double cylindern Available with full-sized interchangeable core (B60R, B62R)n Limited lifetime mechanical and finish

Standard features n Interchangeable core allows for quicker rekeying in

multi-family applications

n ANSI/BHMA Grade 2 Product Performance

n Increased latch/bolt size offers maximum kick-in resistance

n 3 piece assembly

n Temporary construction cores may be ordered with full size interchangeable core locks, mortise cylinders and rim cylinders

Finishes

Series 505 605 606 608 609 612 613 618 619 620 621 622 625 626 643/716US3 US4 US5 US10 US10B US14 US15 US15A US17A US19 US26 US26D US11

B60 • • • • • • • • • • • • 716

B250 • • • • • • •B60R6 • • • 716

Specifications

Certifications Exceeds ANSI/BHMA certified A156.5 - 2001, Grade 1, UL Listed for 3-hour fire door (Grade 2 with FSIC)

Applications Medium-traffic deadbolt, Grade 1 residential or commercial, exterior, new construction and retrofit applications


Specifications

Certifications ANSI/BHMA A156.36, 2010, Grade 2

Applications Multi-family doors


B250 SeriesGrade 2 for medium-traffic commercial and residential use.Shown: B250PD deadlatch

Standard featuresn Ideally suited for pool, condominium gates and utility panelsn Concealed wood frame reinforcer protects from kick-in attacksn Holdback feature keeps the deadlatch in a retracted positionn Available in single and double cylindern Limited lifetime mechanical and finish

Specifications

Applications High-traffic deadlatch, Grade 2 commercial exterior, new construction and retrofit applications

Deadbolt 1 1/8" x 2 1/4" (29mm x 57mm), square corner faceplate, 1" (25mm) housing diameter, 9/16" (14mm) throw

Standard strike 1 1/8" x 2 3/4"(29mm x 70mm), square corner, box


= BHMA certified

= Antimicrobial coating available on select finishes




®


19

B Series mechanical deadboltsB500 SeriesGrade 2 for medium-traffic commercial and residential use.Shown: B560P single cylinder

Standard featuresn Higher security - 10 percent larger diameter deadbolt

n Tougher performance - seamless steel construction from beginning of latch to back of bolt

n Installation versatility - adjustable backset with lock-in-place helix design

n Available in single and double cylinder†

n Limited lifetime mechanical and finish

Finishes

Series 505 605 606 608 609 612 613 618 619 620 621 622 625 626 643/716US3 US4 US5 US10 US10B US14 US15 US15A US17A US19 US26 US26D US11

B500 • • • • • • • • 643

B600 • • • • • • • • 643

B600, B700, B800 SeriesGrade 1 for high-traffic commercial use.Shown: B660P single cylinder

Standard featuresn Solid brass or bronze rotating trim ringsn Hardened steel balls protect mounting bolts from drill attackn Available in single and double cylinder†

n Limited lifetime mechanical and finish

Specifications

Applications High traffic deadbolt, Grade 1 commercial exterior, new construction and retrofit applications

Deadbolt 1 1/8" x 2 1/4" (29mm x 57mm), square corner faceplate, 1" (25mm) housing diameter, 1" (25mm) throw

Standard strike 1 1/8" x 2 3/4" (29mm x 70mm), square corner, box

Specifications

Applications High-traffic deadlatch, Grade 2 commercial exterior, new construction and retrofit applications

Deadlatch 1 1/8" x 2 1/4" (29mm x 57mm), square corner faceplate, 1" (25mm) housing diameter, 9/16" (14mm) throw

Standard strike 1 1/8" x 2 3/4"(29mm x 70mm), square corner, box†Patented Primus® XP high security cylinders available.


= BHMA certified

= Antimicrobial coating available on select finishes




®



Builders hardware

Interior hardware

61 Solid door stopn Made from aluminum or brassn Projection: 3 3/16" on aluminum unitsn Finishes: A3, A5, A15, A14, A26D, A716, A-W,

US3, US5, US15, US26, US26D, US716

63 Flex door stop n Made from steeln Projection: 3"n Finishes: F3, F5, F15, F26D, F716,

US3, US5, US15, US26D, US716

Exterior hardware

U700 Eye viewern 120° angle of viewn For doors 1 3/8" to 2 1/16" thickn UL Listed for use on fire door assemblies rated at 90 minutesn Finishes: B4, B26D, B10B, US4, US26D, US10B

U698 Eye viewern 190° angle of viewn For doors 1 3/8" to 2 1/8" thickn U698 is UL Listed for use on fire door assemblies rated at

90 minutesn Finishes: B3, B26, B10B, US3, US26, US10B

601/620 Mail slotsn 11" x 2" openingn Finishes: B3, B5, 626, B15, B26, B716, PA28,

US3, US5, US26D, US15, US26, US716, US28

8400 — Residential grade kick platesn .037 gauge

Finishes SizesPA3 6" x 30", 6" x 34", 8" x 34"

PA619 6" x 30", 6" x 34", 8" x 34"

PA28 6" x 30", 6" x 34", 8" x 34"

PA716 6" x 30", 6" x 34", 8" x 34"

221 Flush pulln Made from wrought brassn Inside cup diameter: 2 1/8"; overall diameter:

2 7/16" depth: 7/16"n Finishes: B3, B716, B5, B14, B15,

US3, US716 US5, US14, US15

262 and 265 manual flush boltn Made from solid brassn Dimension: 6" x 3/4"n Finishes: B3, B5, B26, B26D, B716, US3, US5,

US26, US26D, US716

21

Builders hardware

059 Hand rail bracketn Made from aluminumn Base: 2 1/4" x 1 3/8"n Finishes: A3, A5, A14, A15,

A26D, A716, US3, US5, US15, US26, US26D, US716

59 Hand rail bracketn Made from aluminumn Brass base: 2 15/16" x 1 1/2"n Finishes: A3, A5, A14, A15,

A26D, A716, US3, US5, US15, US26, US26D, US716

436 Floor door stopn Made from brass or aluminumn Oval 1 3/4" x 2"n Finishes: B3, B5, B15, B26,

B26D, B716, PA3, PA5, PA14, PA15, PA92, PA716, US3, US5, US15, US26, US26D, US716

70 Hinge pin door stopn Made from aluminumn Removable bushings

accommodate 1/4" to 5/16" diameter hinge pins

n Finishes: A3, A5, A15, A26, A26D, A716, AW, US3, US5, US15, US26, US26D, US716

349 Ball catchn Made from wrought brassn Face plate: 2 1/8" x 1"n Strike: 2 1/8" x 1 3/8"n Finishes: B3, B5, B15, B26,

B26D, B716, US3, US5, US15, US26, US26D, US716

347 Ball catchn Made from wrought brassn Face plate: 2 1/8" x 1"n Strike: 2 1/8" x 1 1/16"n Finishes: B3, B5, B15, B26,

B26D, B716, US3, US5, US15, US26, US26D, US716

WS407CVX Wall guardn Made from wrought brassn Convex rubber bumpern Finishes: US3, US4, US5,

US10, US10B, US14, US15, US26, US26D, US28, US32D

WS407CCV Wall guardn Made from wrought brassn Concave rubber bumpern Finishes: US3, US4, US5, US10,

US10B, US14, US15, US26, US26D, US28, US32D

990 Sliding door pulln Made from aluminum or steeln Doors 1 3/8" to 1 1/2"n Size 1 3/4" x 2 1/4"n Finishes: A3, A5, A15, A14, A92,

A-716, F3, F5, F14, F92, F-716, US3, US5, US15, US26, US26D, US716

481 Door guard chainn Made from brass or steeln Meets design requirements

of ANSI/BHMA A156.16n Finishes: brass F26, F26D,

F716, US3, US5, US15, US26, US26D, US716

07 Window lockn Made from solid brass or

aluminumn Base: 15/16" x 2 9/16"n Strike: 5/8" x 2 9/16"n Finishes: aluminum-A3, A5, A14,

A15, A92, AW, US3, US5, US15, US26, US26D, US716

026 Bar window liftn Made from aluminumn Base: 1 1/8" x 4"n Finishes: B10B, B14, B15,

aluminum-A3, A5, A14, A92, A5, A-716, US3, US5, US15, US26, US26D, US716

991 Sliding door lockn Made from aluminum or steeln Doors: 1 3/8" to 1 1/2"n Size: 1 3/4" x 2 1/4"n Strike: 1" x 2 1/4"n Finishes: A3, A5, A15, A14, A92,

A-716, F3, F5, F14, F92, F-716, , US3, US5, US15, US26, US26D, US716

580 Ceiling hookn Made from aluminumn Base: 7/8" x 1 15/16, 2 1/4"

projectionn Finishes: A3, A5, A14, A15,

A26, A26D, A716, US3, US5, US15, US26, US26D, US716

581 Single wardrobe hookn Made from aluminumn Base: 1 1/4" x 1/8", 1 5/8"



582 Double wardrobe hookn Made from aluminumn Base: 1 1/16" x 1 1/4, 1 3/32"




IVES finish ANSI/BHMA US Number Finish description Base materialA3 666 US3 Bright brass, clear coat AluminumA5 US5 Satin brass, blackened, satin relieved AluminumA10 668 US10 Satin bronze, clear coat AluminumA10B 703 US10B Dark bronze, oil rubbed AluminumA14 669 US14 Bright nickel, clear coat AluminumA15 670 US15 Satin nickel, clear coat AluminumA19 671 US19 Flat black coated AluminumA26 672 US26 Bright chrome AluminumA26D 702 US26D Satin chrome AluminumA716 Aged bronze AluminumA92 673 Aluminum clear coat AluminumA-Almond Almond AluminumA-BLK Black AluminumA-W White AluminumPA28 628 US28 Satin aluminum, clear anodized AluminumB3 605 US3 Bright brass, clear coat Brass/bronzeB4 606 US4 Satin brass, clear coat Brass/bronzeB5 609 US5 Satin brass, blackened, satin relieved Brass/bronzeB9 611 US9 Bright bronze, clear coat Brass/bronzeB10 612 US10 Satin bronze, clear coat Brass/bronzeB10B 613 US10B Dark bronze, oil rubbed Brass/bronze

614 US10A Satin bronze, relieved, clear coated Brass/bronze616 US11 Satin bronze, blackened, clear coated Brass/bronze

B14 618 US14 Bright nickel, clear coatB15 619 US15 Satin nickel, clear coat Brass/bronzeB15A 620 US15A Satin nickel, blackened, satin relieved Brass/bronzeB26 625 US26 Bright chrome Brass/bronzeB26D 626 US26D Satin chrome Brass/bronzeB716 Aged bronze Brass/bronzeF2C 603 US2C Zink plated SteelF3 632 US3 Bright brass, clear coat SteelF4 633 US4 Satin brass, clear coat SteelF5 638 US5 Satin brass, blackened, satin relieved SteelF10 639 US10 Satin bronze, clear coat SteelF10B 640 US10B Dark bronze, oil rubbed Steel

641 US10A Oxidized satin bronze, relieved, clear coated Steel643 US11 Satin bronze, blackened, relieved, clear coated Steel

F14 645 US14 Bright nickel, clear coat SteelF15 646 US15 Satin nickel, clear coated SteelF26 651 US26 Bright chrome SteelF26D 652 US26D Satin chrome Steel

664 US27 Satin aluminum, clear anodized aluminum AluminumF716 Aged bronze SteelF-W White SteelSP4 Dull brass painted AllSP10 691 Dull bronze painted AllSP28 689 Aluminum painted AllSP313 695 Dark bronze painted AllSPBLK 622 Flat black AllUSP 600 USP Primed for paint AllUS32 629 US32 Bright stainless steel Stainless steelUS32D 630 US32D Satin stainless steel Stainless steelUS32D 654 Satin stainless steel Stainless steelZ605 US26 Bright chrome ZincZ609 US5 Satin brass, blackened, satin relieved ZincZ613 US10B Dark bronze, oil rubbed ZincZ619 US15 Bright brass, clear coated ZincZ625 US26 Bright chrome ZincZ716 Aged bronze ZincZ-W White ZincBLK Black Rubber or plasticWHT White Rubber or plasticGRY Grey RubberTAN Tan RubberBRN Brown Rubber

Key to finishes

23

Schlage® makes distinctive door hardware designed not just to match your personal style, but to

welcome you home.

Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises 27 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com

About Allegion

© 2014 Allegion MR-5015, Rev 5/15schlage.com

Documents

Residential architectural guide - corp...Builders hardware 20-21 Table of ... 6 • Allegion • Architectural guide Convenient. Secure. Stylish. Experience keyless freedom with Schlage