residential & small commercial security systems€¦ · Sophisticated levels of security can be found across the Scantronic and i-on range. For example the i-on30EXD – a Grade 2,

EatonSecurity catalogue - Scantronic and i-on products

residential & small commercialsecurity systems

We deliver:• Electrical solutions that use less energy, improve power reliability

and make the places we live and work safer and more comfortable

• Hydraulic and electrical solutions that enable machines to deliver more productivity without wasting power

• Aerospace solutions that make aircraft lighter, safer and less costly to operate, and help airports operate more efficiently

• Vehicle drivetrain and powertrain solutions that deliver more power to cars, trucks and buses, while reducing fuel consumption and emissions

Discover today’s Eaton.

Powering business worldwideAs a global power management company, we help customers worldwide manage the power needed for buildings, aircraft, trucks, cars, machinery and businesses.

Eaton’s innovative technologies help customers manage electrical, hydraulic and mechanical power more reliably, efficiently, safely and sustainably.

We provide integrated solutions that help make energy, in all its forms, more practical and accessible.

With 2013 sales of $22 billion, Eaton has approximately 100,000 employees around the world and sells products in more than 175 countries.

Eaton.com

Energizing a worldthat demands more.

Eaton and Cooper united.

3

IntroductionContents

SCANTRONIC & i-ON CATALOGUE SCAN0615V1

08 Control panels 17 Access control 18 Keypads 20 Expanders

22 Communicators 26 Relay cards 27 Detectors 34 Sounders

36 Transmitters & receivers 40 Keyfobs 41 Installation accessories

About us.Eaton's Securitybusiness offers adiverse productportfolio developedby a team ofexperts whoseknowledge andexperience isunrivalled in theindustry.

Quality, reliability andresilience are designedinto our products fromthe outset.

4

About us

SCANTRONIC & i-ON CATALOGUE SCAN0615V1 5

Technology you can rely on.

Setting the standard

As well as operating to ISO 9001 quality andISO 14001 environmental standards, Eaton’sin-house testing procedures ensure that anyproduct conforms EN50131, PD6662:2010 andBS 8243:2010+A1:2014.

We are also unique in our commitment to havingproducts independently tested, verified andapproved by some of Europe’s most stringentthird-party testing laboratories.

As well as being a member of the British SecurityIndustry Association (BSIA), we are also approvedby the British Standards Institute (BSI).

Built to last

Quality, reliability and resilience are designed intoour products from the outset.

We positively engage with customers to fullyunderstand their specific requirements and developsolutions that meet real-life needs. Prototypes aretested with installers, architects and end users andcomments are fed back to help refine designs.

Scantronic and i-on’s multi-zone hardwired, radio and hybrid intruder systems; digital and voicecommunicators; and detectors are synonymous with quality and suitable for use in domesticenvironments such as homes and multi-occupancy residential buildings.

Sophisticated levels of security can be found across the Scantronic and i-on range. For example thei-on30EXD – a Grade 2, 30 zone control panel with ground-breaking features including semi-automaticaddressing. Our range is now enhanced by a new high-end panel that is able to run 10 bus lines and cansupport 1,000 individual detector zones.

All products within the Scantronic and i-on family use the same peripherals and programming style.

Scantronic and i-on at a glance...

• Independent testing and certification to PD6662:2010

• The ability to accommodate up to 1000 devices

• Push button addressing• Remote security monitoring

• Future developments include integration with advanced building control systems to add security and offer enhanced energy management

• Up to 70 per cent less energy consumption than other systems

• Uses standard bus cable with a high tolerance for daisy chain or star configurations

touchpoint

6

Training

touchpoint helps installers get the best from ourproducts, through access to first-class technicalsupport and product education - in fact weundertake an average 480 hours of installer trainingevery year.

All new products are supported through one daycertified courses, while additional half dayworkshops provide training on specific areas ofinterest.

Technical support

Eaton takes post-sales support very seriously andits telephone-based technical services teamprovides advice on a range of issues.

Comprised of individuals who have themselvesbeen installers, we aim to answer calls within 25 seconds and this is achieved in 95 per cent of all cases.

Troubleshooting is made more effective as an installer can download the profile of the alarm system, email it to the support team, who can then replicate the problem and offer an appropriate solution.

In certain situations, field-based advice is also available to help with installation, commissioning and maintenance issues.

Get more than intruderdetection, expect morewith touchpoint.Get unrivalled technical support, onlinematerials and rewards.



touchpoint

7

Software

Regular software updates allow alarm systems tooperate to the latest performance and regulatory standards. Eaton offer a remote diagnostics andmanagement tool for customer accounts usingPSTN, IP and USB.

It adds features to products that, if not available,would otherwise necessitate the purchase of a new system. This enhances the longevity ofexisting hardware and maximises return oninvestment.

Web browser

Desktop and mobile devices can access this freeservice by using a common web browser such as Mozilla Firefox, Google Chrome, Apple Safari andMicrosoft Internet Explorer.

With IP access, it allows remote access to controlpanels and means that programming based changes to a system can be made withouthaving to attend the site - saving time and money.

touchpoint is free to joinwww.touchpoint-online.com

touchpoints rewards scheme

Not only do members receive technical support,instant access online to product manuals andsoftware, they can earn rewards simply bychoosing touchpoints qualifying products.From gift vouchers to golf clubs and tablets totreatment, there’s something for the family orsomeone special. Simply look out for thetouchpoints sticker.

8

Control panels9448


Compatibility

Description

9427EUR-80 Wired keypad

Variants Technical specification

Part No Description

9448EUR-90 7 zone control panel with on-board keypad

9448EUR-95 7 zone control panel with remote 9427 remote keypad

BS8243 compliant No

Maximum zones 6 + 1 E/E

Users 2

Maximum wired keypad 2 (9448-90), 4 (9448-95)

Total number of log events 10

Setting options Part set (1)

Power supply 1 Amp

The 9448EUR-90 and 9448EUR-95 weredesigned to meet basic residential intruderdetection requirements, these are quick to installand simple to use.

Easy to operate, both have full and part setfacilities, the ability to change access codes forimproved security as well as the option toconnect to additional remote keypads forinstallation flexibility.

At a glance...

• Up to six zones of protection plus exit/entry Zone (plus one dedicated entry/exit zone)• Global tamper • Bell, strobe and one programmable output

• Ten event log • Day system status LED • Communication output

8

9

Control panels9651PD

Variants

Part No Description

9651PD-41 8 zone control panel

9651PD-43 8 zone control panel, with built-in prox

The Scantronic 9651 is a Grade 2x fullyprogrammable eight zone control panel, with fulland part-set options. Up to four keypads can beadded to the system, allowing easy operationfrom any location.

When using a 9943 keypad, the 9651 can beeasily set and unset using a proximity tag withoutthe need to remember the access code.

Technical specification

Compatibility

Description

9941EN Wired keypad

9943EN Wired keypad with built-in prox

BS8243 compliant No

Maximum zones 8

Users 50

Maximum wired keypad 4



Power supply 1 Amp


At a glance...

• 350 event log (250 mandatory events and up to 100 non-mandatory events), which is date and time stamped to comply with ABI (Association of British Insurers) requirements

• Compliant to PD6662:2010 at Grade 2x • Simplified user interface and installer menus

10

Control panelsi-on16



Compatibility

Description

KEY-K Series Range of wired keypads, including options with built-in prox and zones

i-KP01 Wired keypad with built-in prox

i-RK01 Radio keypad

Variants

Part No Description

i-on16 16 zone control panel, sold with the KEY-KP01 keypad

i-on16KIT00 Essential kit

i-on16KIT01 Audible kit

i-on16KIT02 Communicating kit

i-on16KIT03 Complete kit

i-on16 is a PD6662:2010 Grade 2 solution,featuring 16 radio zones using Eaton’s Securitybusiness’ proven combined dual diversity+system.

Ideal for residential or small commercialapplications, the i-on16 provides a full professionalsecurity solution with a separate control andkeypad designed to maintain system integrity.

Uses a professional grade 7Ah battery.

BS8243 compliant Yes

Maximum zones 16

Users 16



Digi-modem i-SD01 Plug on


Power supply 1.5 Amp

Built radio Yes

At a glance...

• Sold with KEY-KP01• Built-in radio outputs

• Plug-on footprint for the i-SD01• Four wired outputs (optional clean contact relays i-RC01)

Worth 1,200 touchpoints(see page 7 to find out more)

11

Control panelsi-on30EX

Variants

Part No Description

i-on30EXDKP Compact control panel expandable to 30 zones, with built-in communicator. Sold with the KEY-KP01

i-on30EXDLKP Large control panel expandable to 30 zones, with built-in communicator. Sold with the KEY-KP01

Ideal for smaller PD6662:2010 Grade 2 installations,the i-on30EX range offers advanced flexibility andconfiguration, with ten zones on the control panel,expandable to 30 through wired and radioexpanders over four partitions.

The system can accommodate 50 users, each ableto use a PIN, prox tag and keyfob to set thesystem. The panel will also accept an additionalHold Up Device (HUD) per user.

Available with two sizes of control panel, thesmaller housing is our well established industrystandard which can contain a 7Ah battery, whilstthe larger housing is designed to accommodate a17Ah battery and a broad range of 3rd partycommunication equipment.


Compatibility

Description

EXP-PSU 10 zone intelligent powered expander

EXP-W10 10 zone wired expander

EXP-WCC 10 zone wired expander, full 4 wired CC support

EXP-R10 10 zone radio expander




Maximum zones 30 (10 wired 20 hybrid)

Users 50

Maximum bus devices 10

Plug-by outputs 12


Digi-modem Digi-modem built-in (EXD only)

Setting options Part set (3) or wards (4)

Power supply 1 Amp

Local port USB


At a glance...

• Speech dialler plug-on option• One transistor output• 12 digital plug-by outputs

• Control panel size options• Supports downloader• 10 FSL zones, expandable to 30


12

Control panelsi-on40



Compatibility

Description



i-RK01 Radio keypad

Variants

Part No Description

i-on40 40 zone control panel, sold with the KEY-KP01

i-on40 is a PD6662:2010 Grade 2, hybrid one-boxsolution, featuring 24 radio zones and 16 wiredzones in one compact control panel. Ideal foradvanced residential applications and small tomedium sized commercial projects.

As standard the i-on40 includes a web server thatdelivers a simple, powerful panel interface for set-up, programming and local IP network control.


Built-in web server Yes


Users 50


Plug-by outputs 16


Digi-modem Plug on (i-dig02, i-sd02 or i-gsm02)

Setting options Part set (3) or partitions (4)


Local port USB

At a glance...

• Hybrid panel• Part set and partition mode• Includes web server and supports downloader• Built-in USB port for onsite software upgrades

• Supports full range of i-on communicators• Support for downloader over USB, PSTN and IP• 12 plug-by outputs• Sold with KEY-KP01


13


Variants

Part No Description

i-on50EXDKP Control panel expandable to 50 zones with built-in communicator, sold with the KEY-KP01


Compatibility

Description











Users 100


Plug-by outputs 16


Digi-modem Digi-modem built-in



Local port USB

At a glance...

• Three panel outputs, including one single clean contact relay on board• 16 digital plug-by outputs• Supports up to 17 Amp battery

• Ten FSL zones on board, expandable to 50• Includes web server and supports downloader• On-board communicator


The i-on50EX range has been designed for mid-sized installations at PD6662:2010 Grade 2 or 3.

The system provides advanced flexibility andconfiguration options, with ten zones on the controlpanel. i-on50EXD can be expanded to 50 hybridzones configured across five partitions.

Up to 100 users are able to use a PIN, prox tag and keyfob to set the system. The control panel willalso accept an additional Hold Up Device (HUD) per user.

The PCB has its own protective packaging. Thismeans that the control panel can be mounted aspart of first fix with the PCB being installed forprogramming and commissioning. As standard thecontrol panel includes a web server that delivers asimple, powerful panel interface for set-up,programming and local IP network control.


14 SCANTRONIC & i-ON CATALOGUE SCAN0615V1



Compatibility

Description








Variants

Part No Description

i-on160EXKP Control panel expandable to 160 zones, sold with the KEY-KP01

i-on160EX has ten zones on board with a totalhybrid zone capacity of 160 zones atPD6662:2010 Grade 2 or 3. The control panelis the second largest in the i-on range and cansupport a variety of battery capacities with amaximum of two 12v 17Ah batteries.

Capable of managing 500 users, each able touse a PIN, prox tag and keyfob to set the system.The panel will also support an individual Hold UpDevice (HUD) for each of the users.

With its built-in webserver this panel is readilyconfigured via a web browser which can be alsoused to programme the fully customisableprogrammable output. In addition the webserverprovides a more flexible management interfacevia mainstream web browsers.




Users 500


Plug-by outputs 16


Digi-modem Plug-on (i-dig02, i-sd02 or i-gsm02)


Power supply 3 Amp

Local port USB

At a glance...

• Webserver built-in • ARD fully supports remote servicing • Upload/Download compatible • Can accommodate two 17 Amp batteries

• Three outputs (one clean contact relay, two transistorised)• 16 communication outputs• Ten FSL zones, expandable to 160


15SCANTRONIC & i-ON CATALOGUE SCAN0615V1


Variants

Part No Description

i-on1000EXKP Control panel expandable to 1000 zones, sold with the KEY-KP01

With all the functionality and robustness of the i-onproduct lines; scaled to 1,000 zones, 1,000 users,including 1,000 outputs and with 1,000 meters ofcable per bus, the i-on1000EX meets and surpassesthe most demanding security specifications.

System outputs are fully customisable using theenhanced web browser interface either directlyonto the panel or over a local network connection.The large metal box can accommodate up to two12v 17Ah batteries.

Ideal for replacing large systems in Schools,Colleges, Universities, Hospitals or largecommercial buildings.


Compatibility

Description







i-KP01 Wired keypad, with built-in prox



Maximum zones 1000 (1000 hybrid)

Users 1000


Plug-by outputs 16

Total number of log events 6,500

Setting options Partitions (50)

Power supply 3 Amp

Local port USB

At a glance...

• 10 buses • 50 wards• 5,000 mandatory log events• Grade 3

• 1,000 zones• 1,000 users• 1,000 outputs (wired or radio)• 250 bus devices (25 per bus)


Selecting the right i-on16 kit has never been easier

NEW KITS

Worth

1,200 touchpoints!

Product Code

i-on16 control panel

Keypad (KEY-KPZ01)

x3 Radio pet tolerant PIRs (XCELRPT)

Radio door contact (734r)

x5 Prox tags (PROXTAGPK5)

Two-way radio sounder (760es)

Two-way key fob (FOB-2W-4B)

Speech dialler (i-SD01)

Wired pet tolerant PIR (XCELWPT)

Wired door contact (WDC01)

Essentials

(i-on16KIT00)

•

•

•

•

•

Audible

(i-on16KIT01)

•

•

•

•

•

•

Communicating

(i-on16KIT02)

•

•

•

•

•

•

•

•

•

Complete

(i-on16KIT03)

•

•

•

•

•

•

•

•

•

•

Se

nitcleSe

ng the

00 ,220

112

th rrth

oorWWohpcchuucoou

0 t to

niinpooi

h

ight irhas n

-oight iveehas n

1n-or ve

g 6

s!nttsiin

!s

b

eaene

eris ea

oduct CodePr

i-on16 contr

ypadeK

x3 Radio pet t

Radio door contact

x5 Pr

o-wwTTw

oduct Code

ol paneli-on16 contr

ypad 1) (KEY-KPZ0

ant PIRsolerx3 Radio pet t CELRPT) (X

Radio door contact (734r)

x tagsox5 Pr GPK5)AXTTAO (PR

adio soundery rao-w 60es) (7

CELRPT)

60es)

Essentials

0)T06KI(i-on1

•

•

•

•

•

(i-on1

udibleA

1)T06KI(i-on1

•

•

•

•

•

•

Communicating

T02)6KI(i-on1

•

•

•

•

•

eComplet

T03)6KI(i-on1

•

•

•

•

•

•

woTTwo

Speec

ed pet tWir

ed door contactWir

y r (7

b foey kway-wo (FOB-2W-4B)

r Speec 1) (i-SD0h dialler

ant PIRolered pet t W CELLWPT) (X

ed door contact 1) (WDC0

60es)

(FOB-2W-4B)

WPT)

•

•

•

•

•

•

•

•

NEWKITS

or an re looking fou�Whether y

Communicating or Complete alarm y business has s Securit�stem, Eatonsy

the essentials to the solution with its globally relied on Scantronic i-on1of kits.

udible, Aor an

Communicating or Complete alarm y business has

the essentials to the solution with its 6 range globally relied on Scantronic i-on1

htouc points or a limited time onlyailable on qualifying products fv are ah.touck wwwhecc point-online to see what the latest qualifying kit is.

.yailabilitvSubject to a

chout.ww.ww ntipo on-

,or a limited time only-online to see what the latest qualifying kit is.

com.enilon16



Compatibility

Description

i-on16 16 zone control panel

i-on30EX 30 zone control panel





Variants

Part No Description

ACC-AX300 Controller and power supply

ACC-AX300MP-B Controller and power supply with the addition of 2 black mini readers and 10 proximity cards

The AX300 is a standalone or networkable unitfor access control and environmental monitoring.It includes a power supply as standard with anoptional battery providing back up power in theevent of a mains fail.

The AX300 has the ability to connect to a PC overa TCP network connection for quick updates of theindividual controllers.

Reader connections 2

Door contact input 2

Request to exit 2

Breakglass 2

Lock outputs 2

Inputs 2

Relay outputs 2

Breakglass outputs 2

Volt free relay 1

Sounder output 1

Beacon output 1

Auxiliary equipment output 1

Smart sensor ports 6

Fire input 1

Ethernet RJ45 10 MBs connection for communication to control PC

Tamper Built-in

Size W x H x D (mm) 300 x 260 x 70

At a glance...

• Supports 4,000 cards• 128 time zones• 4,000 transactions

Access controlAX300

18

Keypadsi-KP01 & i-RK01



Compatibility

Description







Variants

Part No Description


i-RK01 Radio keypad

The i-KP01 is a wired keypad with large LCDdisplay and built-in dedicated, compliant HUAfunction. Navigation and text input is a similaruser experience to mobile phones, enabling theinstaller and user to scroll through easy to followmenus.

The radio option, the i-RK01, is powered by threealkaline AA batteries, or can be attached to anexternal DC power supply. Designed to be anadditional keypad, the radio feature means it canbe flexible in its location. No display providessimple set and unset.

i-KP01 i-RK01

EN50131-1 Grade Grade 2 or 3 Grade 2

Environmental class Class 2 Class 2

Dimensions H x W x D (mm) 115 x 56 x 34 115 x 56 x 34

Keypad weight (kg) 0.32 0.32

Proximity tag differs 4,294,967,296 4,294,967,296

Operating frequency NA 868.6625MHz Narrowband

Transmitter range NA Up to 200m range in free space conditions

Battery NA 3 x AA Alkaline 1.5V

At a glance...

• Illuminated buttons• ABCD LEDs• Specified HUA buttons

i-KP01

• Simple red/green indicator• Built-in piezo sounder for the locate a bus device feature and exit/entry tones on wired only

*i-RK01 requires an expander to be compatible with the i-onEX range

19

KeypadsKEY-K Series

Variants

Part No Description

KEY-K01 Wired keypad only

KEY-KP01 Wired keypad with built-in prox

KEY-KPZ01 Wired keypad, with built-in prox and two zones on board

KEY-EP External proximity reader

Small and discreet keypad with three functionalvariants, providing a consistent appearancethroughout the property when different keypadspecifications are required.

The prox enabled keypads also have connectionsfor an external prox reader, in addition to the built-ininternal prox. With the KEY-KPZ01 there are twozones on board for added installation flexibility.


Compatibility

Description







KEY-K01 KEY-KP01 KEY-KPZ01

EN50131-1 Grade Grade 3 Grade 3 Grade 3

Zones 0 0 2

Built-in prox No Yes Yes

Dimensions H x W x D (mm) 128 x 128 x 29 128 x 128 x 29 128 x 128 x 29

Weight (kg) 0.2 0.2 0.2

KEY-EP compatible No Yes Yes


At a glance...

• Programmable brightness and volume levels• Built-in piezo sounder for the locate a bus device feature and exit/entry tones on wired only• Specified HUA buttons

KEY-KP01 and KEY-KPZ01

• Works with the KEY-EP external proximity reader• Custom output (KEY-KPZ01)

20

ExpandersEXP-R10 & EXP-R30



Compatibility

Description







Variants

Part No Description



The EXP-R10 and EXP-R30 are designed for Grade2 installations, as part of PD6662:2010 theseexpanders can provide radio HUA functionality inGrade 3 installations. These radio expanders workwith the latest i-onEX and Menvier intruderdetection systems.

Uniquely, the EXP-R10 and EXP-R30 provide radiooutputs which can be used to trigger remoteequipment for example gates at the end of adrive, or lights across yard or garden.

Additionally these expanders support RadioGrid Roaming where expanders are combinedto create a single, virtual radio grid. Allowingthe transmissions of enabled devices to beprocessed regardless of their location withinthe grid’s range.

All intelligent expanders, with full diagnosticsand fault reporting via the bus. A built-in piezosounder responds to the locate a bus devicefeature.

Compliance EN50131

PD6662:2010 Grade Grade 2

Environmental Class Class 2

Power consumption 40ma

Dimensions H x W x D (mm) 230 x 144 x 44

At a glance...

• One button push for semi-auto addressing for speed and device numbering integrity

• Green heartbeat LED diagnostics tool• 16ohm speaker connection

21

ExpandersEXP-PSU & EXP-W10

Variants

Part No Description


EXP-W10 10 zone wired expander, full 4 wired CC support

The EXP-PSU and EXP-W10 are designed andapproved to be used as part of a Security Grade 2or 3 system.

Remote intelligent expanders, they are intended forwired alarm systems with i-onEX and currentMenvier range of control panels at the heart of thesystem. Providing installation flexibility; with tenzones on board and suitable for a range of FSLvalues, two wire CC and four wire CC compatibility.

Reduce your maintenance times with the devicelocate feature, using on board piezo sounders.Whilst benefitting from full diagnostics and faultreporting via the bus.

Transistorised outputs are provided as standard onthe EXP-W10.


Compatibility

Description







EXP-PSU EXP-W10

PD66620:2010 Grade Grade 3 Grade 3

Environmental Class Class 2 Class 2

Dimensions H x W x D (mm) 427 x 400 x 101 230 x 144 x 44

At a glance...

EXP-PSU additional features:• 3 Amp power supply• Dedicated in and out bus connections• Supports up to two independent charging circuits for mixed battery sizes to a maximum of two x 17Ah batteries • 16 plug-by outputs for local connection of a communications device


• One button push for semi-auto addressing ensuring a unique device address and speeding up installation • Green heartbeat LED diagnostics tool• 16ohm speaker connection• EXP-W10 includes a mounting for clean contact relay board (i-RC01)

22

CommunicatorsSD1 & TSD2


Compatibility

Description

All current Eaton security control panels

Variants

Part No Description

SD1 Stand-alone speech dialler via PSTN, up to four recipients

TSD2 Stand-alone speech dialler via PSTN, up to ten recipients

The SD1 and TSD2 are stand-alone speechdiallers designed to complement any system thatrequires alerts of changes in system conditions.The TSD2 is also capable of temperaturemonitoring.

Messages are sent over standard PSTN line,using personalised voice messages to betransmitted to up to four (SD1) or ten (TSD2)recipients.

The TSD2 also has built-in programmable outputswhich can be operated remotely over PSTN. Andits integrated microphone and speaker adds tothe ability to listen in and speak to the siteremotely.

Both are complete units, with keypad and displayfor programming and set up.

Stand-alone speech diallers that can complement any system requiring alerts of changes in systemconditions. The TSD2 is also capable of temperature monitoring.

SD1 TSD2

Inputs 4 4

Number of contacts 4 10

Listen in/talk back No Yes

SMS over PSTN No Yes

Temperature sensor No Yes


At a glance... At a glance...

SD1• Uses PSTN • Up to four recipients

TSD2• PSTN• Up to ten recipients• Built-in programmable outputs• Built-in microphone and speaker remote site monitoring and communication

23

CommunicatorsSD3 & SD-GSM



Compatibility

Description


Variants

Part No Description

SD3 Stand-alone speech dialler, via PSTN and GSM

SD-GSM Stand-alone speech dialler, via GSM

Stand-alone speech diallers that cancomplement any system requiring alerts ofchanges in system conditions, includingtemperature monitoring. All messages are sentover GSM enabling SMS and speech messages,or standard PSTN line (SD3 only).

Personalised voice messages can be transmittedto up to ten recipients. A complete unit, withkeypad and display for programming and set up.With built-in programmable outputs which canbe operated remotely over PSTN or GSM.

The integrated microphone and speaker adds tothe ability to listen in and speak to the siteremotely.

SD3 SD-GSM

Inputs 8 8

Number of contacts 10 10

Listen in/talk back Yes Yes

SMS over PSTN Yes Yes

Speech over PSTN Yes No

Temperature sensor Yes Yes

At a glance... At a glance...

SD-GSM• GSM• Up to ten recipients• Built-in programmable outputs• Built-in microphone and speaker remote site monitoring and communication

SD3• PSTN • GSM• Up to ten recipients• Built-in programmable outputs• Built-in microphone and speaker remote site monitoring and communication

24

Communicatorsi-GSM02, i-SD01, i-SD02 & i-DIG02



Compatibility

Description

i-on16 16 zone control panel (i-SD01 only, not compatible with any other control panel)






Variants

Part No Description

i-SD01 Plug-on digital communicator by recorded message and SMS via PSTN

i-GSM02 Plug-on digital communicator by recorded message and SMS via GSM

i-SD02 Plug-on digital communicator by recorded message and SMS via PSTN

i-DIG02 Plug-on digital communicator by SMS via PSTN

Multi-function, plug-on communicators for thei-on and Menvier range. Providing ARC reportingand SMS all over standard PSTN or GSM. ARCreporting supports multiple formats including;fast format, contactID, SIA levels 1, 2 and 3.SMS provides up to four contacts with a varietyof status messages.

The i-SD01, i-SD02 and i-GSM02 speech diallersallow personalised voice messages to betransmitted to up to four recipients.

i-SD01 i-GSM02 i-SD02 i-DIG02

Number of messages 4 4 4 4

Number of contacts 4 4 4 4

Speech and SMS over PSTN Yes No Yes No

Speech and SMS over GSM No Yes No No

Downloader modem No Yes Yes Yes

ADSL01 connections Yes No Yes Yes

At a glance...

• i-GSM02 provides speech messages via GSM• i-SD01 and i-SD02 provides speech messages via PSTN

• i-DIG02 uses SMS only• i-SD01 compatible with the i-on16 only

i-GSM02

i-SD02

i-DIG02

25

Communicators8400

Variants

Part No Description

8400UK-21 Eight optional channels connected via standard screw terminals tagged ST1 to ST8

8400UK-21-24 As above, with 24 volts

The 8400 is a wired, auto-dialling digitalcommunicator, capable of being programmed tosupport monitored installations that require a policeresponse.


Compatibility

Description







Wired inputs 8

Plug on inputs 0

No. of relay contacts 2

Plug on Molex inputs No


At a glance...

• Three telephone number capability • Uses reprogrammable NVM chip

• BABT approved

26

Relay cards8600 & i-RC01



Compatibility

Description

768 & 769 8-32 channel narrow band receivers



Variants

Part No Description

8600EUR-00 Eight relay output card

i-RC01 Four relay output card

The 8600 relay expansion card is designed to fit arange of Eaton security equipment convertingtransistorised inputs to clean contact relay inputs.This card contains eight relays, each with its owndedicated input.

The i-RC01 relay card is used with i-on16, i-on40,EXP-W10 and EXP-WCC to convert the four onboard transistorised outputs to clean contactrelays. The relay card uses screw-free mountingsspecifically designed into these products for thispurpose.

8600 i-RC01

No. of relay contacts 8 4

Interface cable Yes Yes

Power consumption 19ma per relay 20ma per relay

At a glance...

• Rated at 1Amp• Supplied with three ready-terminated connecting cables

• Can be fitted to both wired and radio control panels• Plug-on cables available

27

Detectors734

Variants

Part No Description

734rEUR-00 Radio door contact, CC white

734rEUR-05 As above, in brown

734rEUR-01 Radio door contact, FSL white


DET-RDCS See DET-RDCS for more details (page 24)

Grade 2, radio door contact with configurablesecond radio channel. For use with HUA (PA), doorcontact, key switch or other voltage free device.

Compact unit with replaceable CR2 lithium battery.


Compatibility

Description

762 2 channel narrow band receiver




734rEUR-00 734rEUR-01

Detection coverage 10mm 10mm

Second zone Yes Yes

Wired input type CC FSL

Wireless frequency 868.6625 MHz 868.6625 MHz

Batteries 3V CR2 3V CR2


At a glance...

• Choice of finishes for installation on wood and pvc• Independently certified to EN50131

• Flexible installation choices • Compatible with EXP-R10 and EXP-R30

28

Detectors738 & DET-RDCS



Compatibility

Description


768 & 769 8-32 channel narrow band receiver



BAT02 Pack of 100 batteries

Variants

Part No Description

738rEUR-00 Radio shock detector in white


DET-RDCS Radio shock detector and magnetic contact

DET-RDCS-B As above, in brown

Compact radio shock detector using proven,configurable and patented sensing technology. For door and window installations, it’s available ina white or brown housing.

The DET-RDCS has dual functionality as bothshock detector and magnetic contact.

738 DET-RDCS

Adjustable detection Yes Yescoverage

Dual detection No Yes

Detection coverage Adjustable shock Adjustable shock detection detection

Wireless frequency 868.6625 MHz 868.6625 MHz

Batteries 3V CR2 3V CR2

At a glance...

• Configurable LED indication• Adjustable Sensitivity

• Compatible with EXP-R10 & EXP-R30

29

Detectors739

Variants

Part No Description

739rEUR-00 Radio break glass detector

739rEUR-50 As above, with tamper switch

Radio break glass detector designed with proven,pattern recognition technology.

Suitable for use in quiet environments for360 degree acoustic detection.


Compatibility

Description





Detection coverage 6m by 360 degree

Wireless frequency 868.6625 MHz

Batteries 3V CR2


At a glance...

• Lithium i-on battery• 868mhz frequency

• Range up to 6m

30

DetectorsXCEL PIR Series



Compatibility

Description


768 & 769 8-32 channel narrow band receiver




Variants

Part No Description

XCELW Wired PIR

XCELR Radio PIR

XCELWPT Wired, pet tolerant PIR

XCELRPT Radio, pet tolerant PIR

XCEL series of detectors use a single housingdesign across the range. Whether wired or radio,standard or pet tolerant, these PIRs provide aconsistent appearance throughout theinstallation.

The XCEL PIRs have a specially designedspherical lens that generates five layered beams,combined with a dual element sensor to deliversuperior detection and catch performance. ThePIRs are certified to all EN50131 standards, withthe radio technology field proven over manyyears.

XCELW XCELWPT XCELR XCELRPT

Detection coverage (m) 9 9 9 9

Pet tolerant No Yes No Yes

Wireless frequency N/A N/A 868.6625 MHz 868.6625 MHz

Batteries N/A N/A 2 x AA 2 x AA

At a glance...

• Radio variants use two standard AA Alkaline batteries available from any retailer

• Battery life 36 months• Carry one detector for all compatible installations

31

DetectorsDET-RWATER & DET-RARB

Variants

Part No Description

DET-RWATER Radio water detector

DET-RARB Radio assistance required button

The fully supervised radio water detector, theDET-RWATER, will signal the control panel ifpresence of water at the specific location.A combination of radio functionality and a 1mcable to the detection head means true flexibilityfor most interior environments includingbasements or adjacent to washing machines.

With an estimated 9.7 billion litresof water lost through domesticwater leaks eachyear alone early detectionis vital in order to preventcostly and, in some cases,irreparable damage. Theuse of DET-RWATER willhelp reduce thefinancial andenvironmentalimpact of water leaks.

Radio Assistance Required Button signals therequest for local assistance through the use of justa single button. Suitable for doctor's surgeries,shops, schools, workshops, cash offices and manyother similar applications.

Designed to be either wall or desk mounted, theDET-RARB can be learned to EXP-R10 and EXP-R30.The panels can be programmed to activate a rangeof outputs.


Compatibility

Description



DET-RWATER

Alarm notification Adjustable on dry/on wet


Batteries 3V CR2


At a glance...

• Adjustable dry/wet water detector• 1m cable

32

DetectorsDET-RSMOKE



Compatibility

Description





Variants

Part No Description

DET-RSMOKE Radio smoke detector

The DET-RSMOKE is an optical radio smokedetector designed to work with Eaton’s Securitybusiness’ range of radio and hybrid controlpanels.

Providing a flexible solution to smoke detection,it has its own built-in sounder for local alarmsand can be programmed to trigger control panelsounders.

Using Eaton’s Security business’ proven leadingradio technology the device is compatible withi-on, new Menvier and our legacy 868 systems.Installers can utilise the full range ofcommunications options across the panel ranges.

The DET-RSMOKE is ideal for use in a range ofpremises but it is not designed to substituteEN54 Systems.

Detection type Optical

Sounder level 85db at 3m

Test function Yes


Batteries 3 x AA Alkaline

At a glance...

• Independently certified to EN14604• Uses AA alkaline batteries

• Twist and lock installation for easy fitting and removal

33

DetectorsM12

Variants

Part No Description

M12 Four-in-one fire detector

Four-in-one fire detector for almost all conditionsincluding rapid rises in temperature, slow burningand smouldering fires.

The detector incorporates optical and heatdetection technology as well as recognising andcompensating for gradual build-up of dust.


Compatibility

Description







Detection type Optical and heat

Visual indicator LED

Test function Yes

Alarm contact Normally closed

Power consumption 0.5ma


At a glance...

• Four programmable separate detection capabilities within one unit

• Can be programmed to activate at 60°C or 77°C reducing the potential for false alarms

34

Sounders760ES



Compatibility

Description



Variants

Part No Description

760ES Radio external sounder

Grade 2, radio external sounder with built-instrobe.

The advanced electronics and design allow foralkaline or lithium batteries to be fitted and stillprovides up to 15 minute sounder run time, peractivation.

Adjustable screw holes enable levelling withoutre-drilling to make installation simple on anyexternal wall.

Front tamper Yes

Rear tamper Yes

Sounder level 105db at 1m

Cut off timer Selectable 5 secs, 3 mins, 15 mins


Battery packs 2 x 3V Alkaline or 1 x 7.2V Lithium

At a glance...

• Built-in spirit level • Alkaline or lithium battery pack options• Quiet installation mode

• High power LED strobe • 105 dB(A)@1m sound output

35

Sounders9040

Variants

Part No Description

09040UK-00 16ohm extension speaker in tampered housing

16ohm extension speaker in tampered housing.

The 9040 is designed to emit all system tonesincluding entry and exit tones, alarm and faultconditions.

Compatibility

Description

All current Eaton security control panels and expanders


36

Transmitters and receivers701 & 702


Compatibility

Description



Please note: This product is not approved for generating a policeresponse under BS8243:2010

Variants

Part No Description

701rEUR-50 Long range neck pendant transmitter

701rEUR-60 Short range pocket transmitter

702rEUR-00 Watch/pendant transmitter

These wearable devices are narrow band868MHz radio transmitters and can be used totrigger outputs on any of the compatiblereceivers.

The devices are powered by a non-replaceablelithium battery technology, which is designed togive typically three years of life if used twice perday.

For a full list of receivers these will work withplease refer to the compatibility section.

At a glance...

• Long and short range options• Watch and pendent variants

• Typically three years battery life

701

702

37

Transmitters and receivers703

Variants

Part No Description

703rEUR-00 Four channel radio transmitter

The 703 is a four channel radio transmitter that canbe used in conjunction with any wired detector ordevice to provide a radio solution when wiring isnot possible.

Includes four wired inputs that can be connectedto many building management systems (BMS) toindicate alarm sensor activation. Offering a varietyapplications by transmitting signals to any of ourcurrent radio receivers.


Compatibility

Description





Channels 1, 2 or 4 (mode selectable)

Inputs 2 x double pole or 4 x single pole

Programming display Seven-segment LED

Power consumption 15mA


Battery (optional) 2 x AA


At a glance...

• Back up battery• Four wired inputs

• CC or FSL mode• Operates with AA Alkaline batteries

38

Transmitters and receivers705, 706, 710 & 726


Compatibility

Description





Variants

Part No Description

705rEUR-00 Double push lock, belt mounted, secondary programmable channel

706rEUR-00 Double push lock, belt mounted, secondary tilt sensor (‘man down’) channel

710rEUR-00 Belt/pendant mount, replaceable lithium battery, single channel radio HUA

726rEUR-50 Double push lock, belt mounted, single channel radio HUA, long range

726rEUR-60 As above, short range with built in aerial

The range of transmitters have a double pushradio channel for HUA. Powered by lithium batterytechnology, for a longer working life cycle.

The 705 gives you the flexibility of a secondaryprogrammable channel whilst the 706 has a built-in tilt sensor for ‘man down’.

710 is a single channel HUA radio device withbelt/pendant mounting options and replaceablebattery with extended radio range.

The 726 a long range, single channel radio HUAdevice with belt clip.

At a glance...

• Proven design evolved over three generations of radio technology• Device of choice for safety conscious environments

705

710

• Choice of devices to meet user specific needs• Compatible with EXP-R10 and EXP-R30

39

Transmitters and receivers762, 768 & 769

Variants

Part No Description

762rEUR-00 Two channel radio receiver

768rEUR-50 Eight channel radio receivers, expandable to 32 channels with the 769r

769rEUR-50 Eight channel expander for use with the 768r

This highly flexible range of receivers can be usedas a stand-alone unit or linked to other systems toprovide radio integration.

Applications include signalling the opening orclosing of doors or windows and the remotelyswitching of connected devices such as lights,doors and machines.

Includes two relay outputs that can be connectedto many building management systems (BMS) toindicate alarm sensor activation.

Compatibility

Description



792, 794 & 797 External aerials

8600 Relay card for use with 768 and 769

All current Eaton security transmitters


At a glance...

• Built-in LEDs and sounder• Compatible i-on and current Menvier radio outputs


762 768 769

Channels 2 8 8

Devices per channel 4 4 4

Alarm outputs 2 Relay contacts 2 Relay contacts 2 Relay contacts

LED indicators 8 16 16

Programming display Two x seven-segment LED Two x seven-segment LED Two x seven-segment LED

Power consumption 55mA 55mA 55mA

Wireless frequency 868.6625 MHz 868.6625 MHz 868.6625 MHz

Internal aerial Yes Yes No

762

768

• Internal and external aerials to increase radio range• Allows radio contacts/PIR/shock sensors to be added without extra cabling

40

Keyfobsi-FB01 & FOB-2W-4B


Compatibility

Description



Variants

Part No Description

i-FB01 Keyfob

FOB-2W-4B Two-way keyfob

The PD6662:2010 compliant two-way keyfob(FOB-2W-4B) and one-way keyfob (i-FB01) bothenable the user to remotely unset/set thesystem. The two-way keyfob provides feedbackon system status and confirms that the systemhas been set upon exit whilst the two-way keyfobcan be programmed to be used as a panic button

Both are designed to fit comfortably in yourpocket or on a key ring.

Compatible with all current Eaton security controlpanels.

At a glance...

• Long-life lithium battery• Two-way keyfob provides system status• Replaceable battery

• Enhanced transmission range (FOB-2W-4B)• Configurable set/unset• Learnt to user profile not radio zones

i-FB01

FOB-2W-4B


42

Installation accessoriesMISC-SHFPK5


At a glance...

• Clip-on hinge for easy removal during maintenance • Tie wrap anchor points for cable management

• Hinged attachment for straight forward access to the main panel PCB

Variants

Part No Description

MISC-SHFPK5 Pack of five accessory shelves

Compatibility

Description

i-on30EXDL 30 zone control panel




This product speeds the secure installation of 3rdparty equipment, especially communicators,inside our medium and large metal end stations.Saving time and simplifying the installation.

In addition the design of this productaccommodates our EXP-W10 and EXP-WCC PCB.Where a wired expander may have been fittedalongside the control panel, a cleaner, fasterinstallation can be achieved by putting theexpander PCB inside the end station. Avoidingthe need for additional cabling and drilling.

Straight forward to fit it has flexible means ofattachment by either using the mounting holes orself-adhesive strips, already included in the box.

43

Installation accessoriesDET-RSURV01


Variants

Part No Description

DET-RSURV01 Radio test meter including demonstration case

This simple to use radio site survey tool effectivelyidentifies the optimum location for radio devices.

By evaluating the radio signal strength beforeinstallation the success of a radio system is greatlyincreased, reducing the number of return visits andre-installs due to the premises not being suitablefor radio devices or the radio devices being installedin an unsuitable location.

The hand held device operates with a one-buttonpush and the simple red/green indicator meanstraining is not necessarily required. An additionalnumerical display within the receiver housing offersan accurate measure of radio signal strength, ifrequired.

Contained within a professional, protective casewith optional space for other productdemonstration and literature.

Compatibility

At a glance...

• Uses easily replaceable and cost-effective AA batteries • One person operation• Optional PSU

• Straight-forward to use with a one-button push• Simple red/green indicator means training is not necessary


Receiver

Operating frequency 868.6625 MHz

External supply 9V to 16VDC


Batteries 4 x AA alkaline

Transmitter


Batteries 3V CR 1/3N

All current i-on and Menvier radio products

44

Service products


Service product Upgrade

65EN Menvier40 or i-on50EX or i-on50EXD660UK-00 SD1713r XCELRPT714r XCELR85EN Menvier100 or i-on160EX9056UK-21 08400UK-2195EN Menvier300 or Menvier10009651UK 9651PD9751EN Menvier30 or i-on30EXD or i-on409752EN Menvier30 or i-on30EXD or i-on409853EN Menvier40 or i-on50EX or i-on50EXD9951EN & 9953EN KEY-K Series9954EN EXP-W10 OR EXP-WCCM2000 Menvier300 or Menvier1000M550 Menvier30 or Menvier40M600 Menvier30 or Menvier40M800 Menvier40MRNODE EXP-R10 or EXP-R30MSPSU EXP-PSURFX08/16 EXP-R10 or EXP-R30TS2500 Menvier1000 or i-on1000EX

Before a product is made obsolete a limited supplyof product is available for security system servicingand maintenance.

Below is a full list of service products available forreplacement only and its full system upgrade.

Notes

45

Get in touch


Sales

t: 01594 545 454f: 01594 545 455e: [email protected]

Technical services and support

t: 01594 541 978e: [email protected]

Marketing

t: 01594 541 977e: [email protected]

Warranty replacements

Warranty is covered for two years from the dateof manufacture. In the event you wish to returna product considered faulty, please call technicalservices and support to validate your product isstill within warranty, and agree there’s a fault.

They’ll then issue a TSR (technical servicereference) number to provide when returning theproduct to a distributor.

Follow us @securitytp

Please note that the content of this brochure was correct at the time of print and whilst care has been taken to ensure its accuracy, Eaton cannot control the distributionof older copies. Please check www.touchpoint-online.com for up to date information.

46

Notes


47

Notes


© 2015 EatonAll Rights ReservedPub Reference: SCAN0615V1 www.eaton.eu

EatonElectrical Sector EMEARoute de la Longeraie 71110 Morges, Switzerland

Eaton SecurityJephson CourtTancred CloseQueenswayRoyal Leamington SpaWarwickshireCV31 3RZ

Tel: +44 (0)1594 545 400Fax: +44 (0)1594 545 401Web: www.touchpoint-online.com

Documents

residential & small commercial security systems€¦ · Sophisticated levels of security can be found across the Scantronic and i-on range. For example the i-on30EXD – a Grade 2,