Resource RFB Series - Platt Electric SupplyWiremold open inserts sold separately. Additional configurations available. Please consult your Wiremold Field Sales Representative for more

Resource RFB™ SeriesRecessed Floor Boxes

Recessed Floor Boxes for Wood & Concrete Floors

The RFB Series of Floor Box from Wiremold/Legrand areversatile activation solutions that provide power,communication and/or Audio Visual services to openspace areas or directly to workstations. RFB Series Floor Boxesare now available with the new FloorPort™ Activation Covers.This new series of cover incorporates TopGuard™ protection toprevent water, dirt, and debris from entering the power and communication devicecompartments. FloorPort Activation Covers areUL Listed to U.S. and Canadian safetystandards for tile, terrazzo, carpet, and woodfloors. The RFB Series has many uniqueapplications, some of which include schools,financial institutions, commercial officebuildings, and residences.

RFB2, RFB4 & RFB6 Features & Benefits■ Independent wiring compartments

allow capacity for up to six duplexreceptacles and/or communicationservices. Reduces overall cost byproviding for most cablingrequirements.

■ The RFB4 has three versions forvarious applications. A cast ironversion to meet on grade requirements,a steel version to reduce installation cost on above grade floors, and ashallow steel version that providesflexibility with varying concrete depths.

■ Fully adjustable before and after the concrete pour. Labor savings by adapting to various pour depths and conditions.

■ Range of conduit sizes. Allows formost conduit schemes, even feedthrough capability, which saves time and money during installation.

■ Shallow version allows pass-aroundtunneling. Flexibility in design to haveadjacent compartments wired together.

■ Redesigned FloorPort ActivationCovers. Provides TopGuard protectionfrom water, dirt and debris and providesadded strength and durability. Nowavailable in brushed aluminum andplated brass finishes for better aesthetics.

■ Wide variety of mounting brackets.Can adapt to most power andcommunication needs. Reduces overall life cycle cost.

■ UL Listed to U.S. and Canadiansafety standards for tile, terrazzo,and the future UL requirement underUL514A and UL514C for the scrubwater exclusion test for carpet andwood floors.

■ Datacom connectivity options.Accepts industry standard andproprietary devices from a wide range of manufacturers to provide a seamlessand aesthetically pleasing interface forvoice, data, audio, and videoapplications at the point-of-use. A wideselection of data and bezel options areavailable for use with Ortronics®

TracJack™ and Series II devices.

RFB2, RFB6 Additional Features & Benefits

■ The new RFB2 & RFB6 SeriesFloor Box can be installed inboth concrete and wood floorapplications. Provides the firstrecessed wood floor box for both commercial and residentialapplications.

■ New lightweight “slab-on-grade”version. Special fusion-bondedepoxy corrosion resistant paintfinish allows for slab-on-grade use without the weight of cast iron material.

■ The new RFB2 & RFB6 SeriesFloor Box accepts the Floorport™Activation Covers. Allows aconsistent aesthetic finish for the RFB4, RFB2 & RFB6 SeriesRecessed Floor Boxes.

RFB4 Series Floor Boxes

with FloorPortActivation Covers.

RFB2 Series Floor Boxeswith FloorPort

Activation Covers.

ED771R14 – Updated October 2008 – For latest specs visit www.wiremold.com

Protection from water,dirt, and debris.

RFB6 Series Floor Boxes with FloorPortActivation Covers.

2

Catalog No./Item Description/Specifications

RFB2 Two-Compartment Box – For use in either concrete or wood floors. Fully adjustable with tunnel compartment.Supplied with one (1) duplex receptacle, mounting plate, and one (1) communication mounting plate (RFB22AB).Other device plates sold separately.

RFB2-SS Two-Compartment Shallow Stamped Steel Floor Box –For use in either concrete or wood floors. Fullyadjustable with tunnel compartment. Supplied with one (1) duplex receptacle, mounting plate, and one (1)communication mounting plate (RFB22AB). Other device plates sold separately.

RFB2-OG Two-Compartment Box – For use On Grade. Fullyadjustable with tunnel compartment. Supplied with one (1) duplex receptacle, mounting plate, and one (1)communication mounting plate (RFB22AB). Other deviceplates sold separately.

RFB2 Series Multiservice Steel Recessed Floor Box Ordering Information

NOTE: RFB2-OG for on-grade applications is paintedwith a fusion-bonded epoxy designed for use onmetal reinforcement bar and related accessoriesbefore encapsulating in concrete.

Compartment Capacities/Knockout Locations & Sizes

6 1/2"[165mm] 13 1/8"[333mm]

3 7/16"[87mm]

6 1/2"[165mm] 13 1/8"[333mm]

2 5/8"[67mm]

6 1/2"[165mm] 13 1/8"

[333mm]

3 7/16"[87mm]

RFB2 & RFB2-OG RFB2-SSPower or Data

50.2 cu. in. [822.6 ml]Each Side

Power or Data 38.0 cu. in. [622.7 ml]

Each Side

Side KO –1 1/4"

[32mm]

Side KO –1"

[25mm]

Side KO –1 1/4"

[32mm]

Side KO –3/4"

[19.1mm]

Side KO –3/4"

[19.1mm]

Side KO –3/4"

[19.1mm]

Bottom KO –1/2"

[12.7mm]

Bottom KO –1/2"

[12.7mm]

Bottom KO– 3/4"

[19.1mm]

Bottom KO –3/4"

[19.1mm]

Bottom KO –1/2"

[12.7mm]

Bottom KO –3/4"

[19.1mm]

Side KO –3/4"

[19.1mm]

Side KO –1 1/4"

[32mm]

Side KO –1"

[25mm]

Side KO –1 1/4"

[32mm]

Side KO –3/4"

[19.1mm]

Side KO –3/4"

[19.1mm]

Side KO –3/4"

[19.1mm]

Side KO – 3/4"

[19.1mm]

Top View Top View

Side KO –3/4"

[19.1mm]

Side KO –3/4"

[19.1mm]

Bottom KO –1/2"

[12.7mm]

Bottom KO –3/4"

[19.1mm]

Side KO –3/4"

[19.1mm]

Side KO –3/4"

[19.1mm]


RFB2DP Internal Duplex ReceptacleBracket – Accepts standard 15 Amp & 20 Amp Duplex Receptacles.

RFB2B Internal Blank Bracket – Plate used to close off unused Gangs.

RFB2GFI Internal GFI or Decorator Style Receptacle Opening – Acceptsstandard GFCI or Decorator Style Receptacles.

RFB22AB Internal Communication Bracket – Includes two (2) bezels to accept Wiremold Open Systemcommunication inserts (soldseparately).

3


RFB2RT Internal Communication Bracket– Includes one (2) bezel to acceptOrtronics® TracJack devices, and one (2) bezel to accept OrtronicsSeries II devices (sold separately).

RFB2EXT Internal Audio Video Bracket – Accepts Extron Electronics MAAP Series devices (sold separately).

NOTE: For RFB2 Series Floor Boxes only.






RFB2 Series Multiservice Steel Recessed Floor Box Accessories

4


RFB4 Four-Compartment Combination Box – 12 3/4" L x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fullyadjustable with tunnel compartment and two receptacle brackets. Tunneling from end power compartment to end power compartment only. Communication brackets not included. See “Accessories”.

RFB4-4DB Four-Compartment Box – Includes four duplex receptaclebrackets. 12 3/4" L x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fully adjustable. Tunneling from adjacent oropposite compartments only, (not cross compartments).Tunneling can be set to feed all four compartments from one conduit in a single-service application.

3 7/16"[87mm]

RFB4 Series Multiservice Steel Recessed Floor Box Ordering Information

RFB4 Series Compartment Capacities and Knockout Locations and Sizes

FOR RFB4

1"[25mm]

1"[25mm]

1"[25mm]

1 1/4"[32mm]

1 1/4"[32mm]

1 1/4"[32mm]

1 1/4"[32mm]

1 1/4"[32mm]

1/2"[12.7mm]

3/4"[19.1mm]

3/4"[19.1mm]

3/4"[19.1mm]

3/4"[19.1mm]

3/4"[19.1mm]

3/4"[19.1mm]

1 1/4"[32mm]

Power or Data32.3 cu in.[529 ml]

Power or Data (RFB4* Data Only) 16.4 cu in. [269 ml]

Power or Data (RFB4* Data Only) 16.4 cu in. [269 ml]

Feed Through in This Direction Only.


No feed through to opposite data compartment on RFB4. Indicates Bottom KO.

10"[254mm]

12 3/4"[324mm]

NOTE: All boxes and activations are sold separately.

10"[254mm]

5 7/8"[149mm]

4 3/4"[121mm]

12 3/4"[254mm] 3 7/16"[87mm]

NOTE: Only for use in concrete floors.


5


RFB-B Internal Blank Bracket – Powercompartments only. Used to closeoff unused gangs.

NOTE: For RFB4 only.

RFB-DR Internal Duplex Bracket – Acceptsstandard 15 Amp & 20 Amp Duplex Receptacles.


RFB-GFI Internal GFI Bracket – Acceptsstandard GFCI or Decorator StyleReceptacles.• Wiremold open inserts,

sold separately.


RFB4-LPB Communication Bracket – Activate™ low profile bezel included. Wiremold open inserts sold separately.


RFB4-LPBS2 Communication Bracket – Ortronics Series II Low profile bezel included.


DTB-2-2AB Communication Bracket – Two 2A size Activate bezelsincluded. Wiremold open inserts,sold separately.


DTB-2-2RT Communication Bracket – Ortronics AB2TJ TracJack and ABS2 Series II bezels included.



DTB-2-4TKO Communication Bracket – Four RJ keystone opening knockouts. Use as blank plate or for up to four RJ openings.

NOTE: For RFB4 only. Opening dimension is 9/16" x 3/4" [14.3mm x 19.1mm].

DTB-2-DT Communication Bracket – With IBM Type II opening (devices not included).


DTB-2-SD Communication Bracket – With duplex opening (devices not included).


RFB-WTB Conversion Kit – To convert the RFB4 Box to a RFB4-4DB Box.

WTB-2-AB Communication Bracket – One 2A size Activate bezel included. Wiremold open inserts sold separately.

NOTE: For use with the RFB4-4DB.

WTB-2-RT Communication Bracket – Ortronics AB2TJ TracJack and ABS2 Series II bezels included.

NOTE: For use with the RFB4-4DB.

Additional configurations available. Please consult yourWiremold Field Sales Representative for more information.


6


CILT-2-RT Communication Bracket – Ortronics AB2TJ TracJack and ABS2 Series II bezels included.

CILT-4TKO Communication Bracket – Four RJ opening knockouts. Use as blank plate or for up to four RJ openings.

NOTE: Opening dimension is 9/16" x 3/4" [14.3mm x 19.1mm].


RFB4-CI-1 Four-Compartment Cast Iron Box – 14 1/2" L x 11 7/8" W x 3 7/16" D [368mm x 302mm x 87mm]. Fully adjustable with tunnel compartment and two receptacle brackets. Feed through from adjacent oropposite compartments only, (not cross compartments).Communication brackets not included. See “Accessories”.


RFB4 Series Multiservice Cast Iron Recessed Floor Box Ordering Information



RFB4 Series Compartment Capacities and Knockout Locations and Sizes

For RFB4-CI-1

Power or Data27.0 cu in. [443 ml]

Power or Data27.0 cu in. [443 ml]


CIHT-D Internal Duplex ReceptacleBracket – Accepts standard 15 Amp & 20 Amp Duplex Receptacles.

CIH/LT-B Internal Blank Bracket – Used toclose off unused Gangs.

CIHT-GFI Internal GFI Device Bracket – Accepts standard GFCI or Decorator Style Receptacles.

CILT-2AB Communication Bracket – Two 2A Activate bezels included. Wiremold open inserts sold separately.

Additional configurations available. Please consult your WiremoldField Sales Representative for more information.

11 7/8"[302mm]

5 1/8"[130mm]

14 1/2"[368mm]

5 1/8"[130mm] 3 7/16"

[87mm]

1"[25mm]

1"[25mm]

1"[25mm]

1"[25mm]

1 1/4"[32mm]

1 1/4"[32mm]

1 1/4"[32mm]

1 1/4"[32mm]

RFB4 Series Multiservice Cast Iron Floor Box Accessories


7


RFB-2AB-SS Internal Bracket – Two activate, bezels included. Wiremold open inserts sold separately.

RFB-2-SSRT Communication Bracket – Ortronics AB2TJ TracJack and ABS2 Series II bezels included.

RFB-4TKO-SS Internal Bracket – Four RJ Keystone opening knockouts. Use as blank plateor for up to four RJ openings.

NOTE: Opening dimension is 9/16" x 3/4" [14.3mm x 19.1mm].


RFB-B-SS Internal Blank Bracket – Used toclose off unused Gangs.

• Wiremold en inserts, sold separately.

RFB-RB-SS Internal Duplex Receptacle Bracket – Acceptsstandard 15 Amp & 20 Amp Duplex Receptacles.

RFB-GFI-SS Internal GFI Receptacle Bracket – Accepts standard GFCI & Decorator style Receptacles.


RFB4-SS Four-Compartment Shallow Stamped Steel Box – 13 5/8" L x 10" W x 2 7/16" D [346mm x 254mm x 62mm].Fully adjustable with tunnel compartment and two receptacle brackets. Feed through tunneling to adjacent compartments only. Tunneling can be set to feed all four compartmentsfrom one conduit in a single-service application.Communication brackets not included. See “Accessories”.


RFB4 Series Multiservice Shallow Steel Recessed Floor Box Ordering Information

10"[254mm]

13 5/8"[346mm]

5 7/8"[149mm]

4 3/4"[121mm]

2 7/16"[62mm]

RFB4 Series Compartment Capacities/Knockout Locations & Sizes

Power or Data15.7 cu. in.[257 ml]




FOR RFB4-SS

1"[25mm]

1"[25mm]

1"[25mm]

1"[25mm]

1/2"[12.7mm] 1/2"[12.7mm]

3/4"[19.1mm]

3/4"[19.1mm]

3/4"[19.1mm]

3/4"[19.1mm]

3/4"[19.1mm]

3/4"[19.1mm]

1" [25mm]

1"[25mm]

1"[25mm]

1"[25mm]

Additional configurations available. Please consult yourWiremold Field Sales Representative for more information.

Indicates Bottom KO

RFB4 Series Multiservice Shallow Steel Floor Box Accessories


8

RFB6 Series Multiservice Steel Recessed Floor Box Ordering InformationCatalog No./Item Description/Specifications

RFB6 Six-Compartment Box – For use in either concrete orwood floors. Fully adjustable with tunnel compartment.Supplied with two (2) duplex mounting plates, two (2)communication mounting plates (RFB62A), and (2) blankmounting plates. Other plates sold separately.

RFB6-OG Six-Compartment Box – For use in either concrete or wood floors. Fully adjustable with tunnel compartment.Supplied with two (2) duplex mounting plates, two (2)communication mounting plates (RFB62A), and (2) blankmounting plates. Other plates sold separately.

RFB6 Series Compartment Capacities/Knockout Locations & Sizes

14"[355mm]

14 5/8"[371mm]

3 1/4"[82.55mm]

ABA B

A

A = Side KO 1 1/4" [32mm]B = Side KO 1" [25mm]C = Side KO 3/4" [19.1mm]

C

C

A

ABA B

ABA B

CompartmentC

CompartmentD

B

CompartmentC

ABA B

A = Bottom KO 1 1/4" [32mm]B = Bottom KO 3/4" [19.1mm]

CompartmentC

CompartmentD

B

CompartmentC

A

C

C

A

14"[355mm]

14 5/8"[371mm]

3 1/4"[82.55mm]

Feed through is accomplished through removable plugs.

Side Knockout Locations Bottom Knockout LocationsCompartment Wire and Communication Compacities

C = Power or Data 52 in3 [852ml]D = Power or Data 23 in3 [376ml]

KNOCKOUTS COMPARTMENT CAPACITIESKNOCKOUTS

9


RFB6DP Internal Duplex ReceptacleBracket – Accepts standard 15 Amp & 20 Amp Duplex Receptacles.

RFB6B Internal Blank Bracket – Used to close off unused Gangs.

RFB6GFI Internal GFI or Decorator Style Receptacle Opening – Acceptsstandard GFCI & Decorator Style Receptacles.

RFB6S1 Internal Single Receptacle Bracket – Receptacle opening 1 3/8" [35mm].

RFB6S2 Internal Single Receptacle Bracket – Receptacle opening 1 9/16" [40mm].


RFB6RT Internal Communication Bracket– Includes one (1) bezel to acceptOrtronics® TracJack devices, and one (1) bezel to accept OrtronicsSeries II devices (sold separately).

RFB6EXT Internal Audio Video Bracket – Accepts Extron Electronics MAAP Series devices (sold separately).

RFB62A Internal Communication Bracket – Includes two (2) bezels to accept Wiremold Open System communicationinserts (sold separately).

NOTE: For RFB6 SeriesFloor Boxes Only.









10


S38CCTCAL Flanged Cover Assemblies – S38CCTCBS Available in die-cast aluminum S38CCTCBK assembly with brushed aluminum

finish (AL), die-cast zinc assemblywith plated brass finish (BS), anddie-cast zinc with painted black finish (BK). Insert area in lid allowsfor carpet or tile cutouts to matchfinished floor.

S38PPTCAL Flanged Partition Feed Cover S38PPTCBS Assemblies – Available in die-cast S38PPTCBK aluminum assembly with brushed

aluminum finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Provided with one 1" trade size screw plug for power or communications type cabling, and one combination 1 1/4" and 2" trade size screw plug for communications type cabling. Allows for feeding of both power and communication cabling.

S38BBTCAL Flanged Cover Assemblies – S38BBTCBS Available in die-cast aluminum S38BBTCBK assembly with brushed aluminum

finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Lid area is flush with the finished floor, no cutouts provided.


S40CCTCAL Flanged Cover Assemblies – S40CCTCBS Available in die-cast aluminum S40CCTCBK assembly with brushed aluminum


S40BBTCAL Flanged Cover Assemblies – S40BBTCBS Available in die-cast aluminum S40BBTCBK assembly with brushed aluminum


NOTE: New FloorPort covers and flanges are now supplied with abrushed aluminum (AL) or plated brass (BS) finish replacingthe painted finishes on the old version.

FloorPort Flanged Cover Assemblies for RFB2, RFB4 & RFB6 Series Floor Boxes

6 9/16"[167mm]

7 3/4"[197mm]

6 9/16"[167mm]

7 3/4"[197mm]

6 9/16"[167mm]

7 3/4"[197mm]

6 9/16"[167mm]

7 3/4"[197mm]

Release Latch – Tabless Version

6 9/16"[167mm]

7 3/4"[197mm]

Release Latch – Tabless Version

NOTE: Not for use with RFB6 Series Floor Boxes.

11

Guide Form Specs CAD Drawings Available

I M P O R T A N T !The above kits must be used with the appropriateRFB style partition feed boxes in order to separatepower and communication services, and to secure

the cover when using multiple services.


RFBKIT Barrier Kit – Used to separatepower and communication wires in partition feed covers. Suppliedwith base and three extensions to adjust to cover height. For use on RFB2, RFB4, RFB2-SS,RFB2-OG, and RFB4-SS FloorBoxes. Kits are sold separately.

RFBCIKIT Barrier Kit – Used to separatepower and communication wires in partition feed covers. Suppliedwith base and three extensions to adjust to cover height. For use on RFB4-CI Floor Boxes only. Kits are sold separately.

FloorPort Partition Feed Barrier Kits

Maximum LoadCatalog Numbers in Pounds

S38CCTCAL, S40CCTCAL 1000S38CCTCBS, S40CCTCBS 1000S38CCTCBK, S40CCTCBK 1000S38BBTCAL, S40BBTCAL 750S38BBTCBS, S40BBTCBS 750S38BBTCBK, S40BBTCBK 750S38PPTCAL 750S38PPTCBS 1000S38PPTCBK 1000S39CCTCAL 1000S39CCTCBS 1000S39CCTCBK 1000S39BBTCAL 750S39BBTCBS 750S39BBTCBK 750S39PPTCAL 750S39PPTCBS 750S39PPTCBK 750

Static Load Capacities for FloorPort Cover Assemblies

Note: Load applied through a 2" [51mm] mandrel incenter of service fitting.

Note: Loads listed above are static loads only and donot pertain to rolling loads. Load ratings havebeen reduced due to material change from die-cast zinc to aluminum.


S39CCTCAL Flangeless Cover Assemblies – S39CCTCBS Available in die-cast aluminum S39CCTCBK assembly with brushed aluminum


S39PPTCAL Flangeless Partition Feed Cover S39PPTCBS Assemblies – Available in die-cast S39PPTCBK aluminum assembly with brushed

aluminum finish (AL), die-cast zinc assembly with plated brass finish (BS), and die-cast zinc with painted black finish (BK). Provided with one 1" trade size screw plug for power or communications type cabling, and one combination 1 1/4" and 2" trade size screw plug for communications type cabling. Allows for feeding of both power and communication cabling.


S39BBTCAL Flangeless Cover Assemblies – S39BBTCBS Available in die-cast aluminum S39BBTCBK assembly with brushed aluminum


NOTE: New FloorPort covers and flanges are now supplied with abrushed aluminum (AL) or plated brass (BS) finish replacingthe painted finishes on the old version.

FloorPort Flangeless Cover Assemblies for RFB2, RFB4 & RFB6 Series Floor Boxes

5 9/16"[142mm]

6 3/4"[171mm]

5 9/16"[142mm]

6 3/4"[171mm]

5 9/16"[142mm]

6 3/4"[171mm]

NOTE: Not for use with RFB6 Series Floor Boxes.

Wiremold / LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251Canada:570 Applewood Crescent • Vaughan, Ontario L4K 4B41-800-723-5175 • FAX 905-738-9721

ED771R14 – Updated October 2008 – For latest specs visit www.wiremold.com© Copyright 2008 Wiremold / Legrand All Rights Reserved

Notes

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 244 /GrayImageMinResolutionPolicy /Warning /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /Warning /DownsampleMonoImages false /MonoImageDownsampleType /Average /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly true /PDFXNoTrimBoxError false /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox false /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > > /FormElements true /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MarksOffset 10.800000 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /UseName /PageMarksFile /RomanDefault /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice

Documents

Resource RFB Series - Platt Electric SupplyWiremold open inserts sold separately. Additional configurations available. Please consult your Wiremold Field Sales Representative for more