RESUME

----------------Name and Designation: Dr. SATYA PRAKASH SRIVASTAVA

Professor

Date of Birth: 18th FEB. 1954

Address for Communication: Dr.S.P.Srivastava Professor Deptt. Of Electrical Engg. Indian Institute of Technology, Roorkee ROORKEE (India)-247667 e-mail: satyafee @ iitr.ernet.in

satyafee @rediffmail.com Ph no. 01332-285583 (O), 285076 (R) 09411544198 (M)

Educational Qualifications:

B.Tech. I.T.B.H.U.,VARANASI 1976 ELECTRICAL ENGG.

M.Tech. I.T.B.H.U.,VARANASI 1979 ELECTRICAL MACHINES

Ph.D. University of Roorkee 1993 ELECTRICAL ENGG.

Area of Interest:

Electrical Machines & Drive Electrical Machine Design Power Electronics Permanent Magnet Motor Drive Multi phase Induction Motor Drive VSCF generation

High efficiency Induction motor drive

Dissertation Topics:

M.Tech. “Certain investigations on a chopper fed separately excited dc motor”

Ph.D. “Design and performance investigations on static converter fed Synchronous motor Drive”

Experience:

Teach. Asst. M.M.M. Engg.College, Gorakhpur 06.11.78 - 09.05.79 Teach. Asst. --- do ------- 26.07.79 - 13.02.81 Lecturer University of Roorkee 18.02.81 - 29.08.94 (Now I.I.T.Roorkee) Reader/Asst.Prof. ---- do -------- 30.08.94 - 29.04.98

Assoc. Professor --- do ------- 30.04.98 - 05.07.06 Principal KEC Dwarahat (Almora) 06.07.06 - 15.07.07

(During the stay worked as Dean, Faculty of Technology, Kumaon University,Nainital also) Assoc. Professor I.I.T.Roorkee 16.07.07- 14.04.08

Professor -- do -- 15.04.08- contd.Prof.& Head,EE Deptt. --do -- 01.05.14 - contd.

Membership:

Life membership System Society of India

Life membership Indian Society of Continuing Engg. Education

List of Ph.D. Dissertations (Supervised)

1. “Analysis of Multi Phase Induction Machine” by Mr. Vinay Pant,

Co-guide Dr. G.K.Singh, (2001).

2. “Investigation on Permanent Magnet Motor Drive”, by Mr. A.N. Tiwari,

Co-guide Dr. Pramod Agarwal, (2003).

3. “Performance Investigation of SVM based CSI fed Induction Motor Drive” by Parthiban P.

Co-guide Dr. Pramod Agarwal, (2009).

4. “Optimal Design and Control of Three Phase Induction Motor” by Thanga Raj C. Co-guide

Dr. Pramod Agarwal, (2009).

5. "Performance investigation of switched reluctance motor drive" by Jignesh Ashokbhai

Makwana Co-guide Dr. Pramod Agarwal, (2013).

6. "Performance investigation of Low voltage High current power supply" by Rakesh Maurya

Co-guide Dr. Pramod Agarwal, (2014).

7. “Investigation on Sensorless Vector control of MLI fed induction motor”, by Giribabu

Dyanamina, Co-guide Dr.Mukesh Pathak (2014).

List of M.E./ M.Tech. Dissertations (Supervised)

1. Experimental investigations on performance of LCI fed reluctance motor (1988)

2. Development and Performance analysis of improved reluctance motor (1989)

3. Development and performance of microprocessor based starting scheme of LCI fed induction

motor drive (1991)

4. Dynamic analysis of single machine system incorporating power system stabilizer (1992)

5. Investigation on multi-phase chopper fed DC motor drive (1993)

6. Design optimization of inverter fed induction motor (1993)

7. Microcomputer controlled converter fed DC drive (1994)

8. Development and performance investigation of micro-processor based voltage regulator fed

induction motor drive (1995)

9. Experimental investigation on a two step regulator fed 1-phase induction motor drive (1995)

10. Performance Investigations on Variable speed constant frequency generator (2003)

11. Performance investigation on 8031 based switched reluctance motor drive (1996)

12. Experimental investigation on microprocessor based VSCF generator (1996)

13. Investigation on PWM rectifier fed DC motor drive (1997)

14. Analysis of alternator with twin three phase displaced stator windings (1997)

15. Investigation on PWM converter fed DC drive in regenerating mode (1997)

16. Performance investigation on non sinusoidal supply fed induction motor drive (2000)

17. Experimental Investigations of Three level PWM Converter (2004)

18. Analysis of permanent magnet synchronous motor drive (2000)

19. Performance investigation of a CSI fed induction motor drive for traction application (2001)

20. Performance evaluation of neuro- controller for brush less DC motor drive (2001)

21. Performance investigation of an automatic voltage regulator using an AC chopper (2001)

22. Fault diagnosis of induction motor using current signature (2002)

23. Analysis of VSCF power conversion scheme using brush less DC generator (2002)

24. Performance Investigations of Wind Energy Conversion System (2004)

25. Performance Investigation on a multilevel converter with high input power factor (2005)

26. Modeling and Analysis of CSI fed drive using field orientation control (2005)

27. Modeling and Simulation of self excited generator with Voltage regulator (2006)

28. Stability analysis of multi level inverter fed Induction motor drive (2006)

29. Design Improvement of Induction Motor for Adjustable speed Drive (2008)

30. Performance Investigation of reduced loss CSI fed Induction motor Drive (2008)

31. Analysis of permanent magnet synchronous motor drive (2009)

32. Simulation of SVM based VSI fed induction motor drive (2009)

33. Performance analysis of VSCF generating system (2009)

34. Analysis of doubly fed Induction generator(2010)

35. Performance Evaluation of closed loop DC motor drive(2010)

36. Analysis of Vector controlled Induction motor Drive(2010)

37. Performance evaluation of energy efficient control of VSI fed induction motor drive (2011)

38. Performance evaluation of indirect vector controlled induction motor drive (2011)

39. Performance evaluation of sensor less control of SRM drive (2011)

40. Performance investigation of DSP based self controlled PMSM drive (2012)

41. Performance evaluation of 3-phase 4-switch inverter fed brushless dc motor drive (2012)

42. Modeling, simulation and Performance analysis of vector controlled induction motor drive (2012)

43. Efficiency optimization of induction motor drive using loss model control (2012)

44. Voltage regulation using static synchronous compensator (2012)

45. Modeling and simulation and Performance analysis of vector controlled induction motor drive

(2012)

46. Modeling and simulation of vector controlled induction motor drive (2013)

47. Modeling and simulation of PMBLDC motor drive (2013)

48. Modeling and simulation of Soft Switched Cascaded bidirectional Buck Boost converter(2013)

49. Analysis of Z - source Inverter (2013)

50. Analysis of SVPWM Z - source Inverter (2013)

51. Analysis and performance evaluation of space vector PWM controlled low switching frequency

voltage source inverter (2014)

52. Design and performance evaluation of Matrix converter for induction motor drive (2014)

53. Performance investigation of doubly fed induction generator (2014)

54. Performance investigation of UPQC (2014)

55. Performance analysis of Z source inverter(2014)

56. Modeling and simulation of switched reluctance motor drive (2014)

List of B.Tech. Project(supervised)

1. Design and development of 3-phase reluctance motor (1980-81)

2. Design and fabrication of 1-phase high frequency inverter (1984-85)

3. Design and fabrication of 3-phase controlled converter (1984-85)

4. Development of switched reluctance motor (1985-86)

5. Closed loop control of dc drive using 3-phase converter (1985-86)

6. Microprocessor based control of switched reluctance motor (1986-87)

7. Development of various configuration of converter for dc motor speed control (1987-88)

8. Design and development of AC chopper (1988-89)

9. Closed loop speed control of dc motor using Ward-Leonard system (1989-90)

10. Design & fabrication of microprocessor based data acquisition system for induction motor

performance (1990-91)

11. Design & fabrication of digital dc motor speed control system (1990-91)

12. Design & fabrication of 1-phase converter fed dc motor drive (1993-94)

13. Development of 1-phase converter for dc motor drive (1994-95)

14. Development of 3-phase solid state AC regulator (1994-95)

15. Design & fabrication of a 1-phase two step AC regulator (1995-96)

16. Design & development of micro-controller based step up chopper fed battery operated

vehicle drive (1995-96)

17. Development of two step regulator for 1-phase induction motor drive (1996-97)

18. Design & development of solid state voltage regulator for wind driven dc generator

(1997-98)

19. Development of improved voltage regulator (1997-98)

20. Development of software for induction machine analysis (1998-99)

21. Design & development of 1-phase voltage controller with low reactive power consumption

(1998-99)

22. Simulation of fuzzy controlled dc drive (2003-04)

23. Dynamic analysis of multi machine power system with FACT devices (2003-04)

24. Closed loop control of dc motor drive (2004-05)

25. Development of spherical stepper motor (SURA project 2005-06)

26. Simulation, Design and Fabrication of a single phase to three phase converter

(SURA project 2005-06)

27. Performance Investigation of microcontroller based induction motor drive (2007-08)

28. Development of DSP based Vector controlled induction motor drive (2007-08)

29. Estimation of Residual life of Transformers (2009-10)30. Simulation of Grid Connected Wind Energy Conversion System (2009-10)31. AC voltage regulator(minor) (2010-11)32. Development of 1-phase AC chopper(minor) (2010-11)33. Step up chopper for battery vehicles (major& minor) (2010-11)34. 1-phase multi level high power factor rectifier (minor) (2010-11)35. FPGA based 1-phase multi level high power factor rectifier (major) (2010-11)36. Fabrication and testing of single phase boost converter(major) (2012 - 13)37. Comparison of direct torque control and vector control of induction motor drive(major) (2012 - 13)38. Design and analysis of Boost converter with motor load (minor) (2013-14)39. Development of Boost converter (major) (2013-14)

List of Publications

International Journal:

1. Bhim Singh, S.P.Srivastava, Govind Mohan, "Improvement in design for optimal steady

state performance of poly phase reluctance motor", Electric Machines & Power system

(USA), Vol. 14 No. 1, 1988, pp 17-31

2. Bhim Singh, S.P.Srivastava, S. K. Baral, "Load commutated inverter fed Variable speed

reluctance motor drive", Electric Machine & power system (USA), Vol. 18, No. 3, 1990, pp

277-288

3. Bhim Singh, Man Mohan & S. P. Srivastava, "Experimental Investigations on Starting of

Inverter fed cage motor ", Journal of Electric Machines & Power System (USA), Vol. 23,

No. 2, March/April 1995, pp 119-140

4. S. P. Srivastava, Bhim Singh, V.K. Verma, "Steady state analysis of self Controlled

synchronous motor drive", Electric machine and Power system Research, Vol. EPS 036/3,

1996, pp 107-117

5. A. N. Tewari, Pramod Agarwal, S.P.Srivastava," Modified hysteresis controlled PWM

rectifier", IEE Proc. Power Appl., Vol. 150, No. 4, July 2003, pp 389-396 6. S.P.Srivastava,” Design of controller for inverter fed synchronous motor drive”,

International Journal of Power & Energy System, Vol.28,Number 3, 2008, page 305-314

7. C.Thanga Raj, S.P.Srivastava, P.Agarwal,” Differential Evolution based optimal control of

Induction motor serving to Textile industry”, IAENG International Journal of computer

science, Vol.35,Issue2, June 2008, page 201-208

8. P.Parthiban, P.Agarwal,S.P.Srivastava,”Control of current source converter using space

vector modulation”, IETECH journal of Electrical Analysis, Vol.2,No.2,2008, pp.083-086

9. C.Thanga Raj, S.P.Srivastava, P.Agarwal “Particle Swarm optimized Design of poly

phase induction motor with the consideration of unbalanced supply voltages”, Int. Journal

of Mathematical modeling, simulation and applications, Vol.1, No.3, 2008, pp.339-350, IK

international publishers

10. C.Thanga Raj, S.P.Srivastava, P.Agarwal,” Energy efficient control of three phase

induction motor- A review “, Int. journal of computer and electrical engg.,IJCEE, Vol.1,

No.1, April 2009, pp 61-70, IACSIT Singapore

11. C.Thanga Raj, S.P.Srivastava, P.Agarwal,”Partical Swarm and Fuzzy logic based optimal

energy conrol of induction motor for a mine hoast load diagram”, Int. Journal of computer

science , Vol.36,No. 1, 2009, pp.17-25

12. C.Thanga Raj, S.P.Srivastava, P.Agarwal,”Realization of Partical Swarm Optimized

design of induction motor via SPEED/PC-IMD”, Int. Journal Engineering letters, Vol.16,

No.4, 2008, pp. 486-492

13. C.Thanga Raj, S.P.Srivastava, P.Agarwal,”Induction motor design with limited harmonic

currents using Partical Swarm Optimization”, Int. Journal of Electrical systems Science and

Engineering, Vol.1, No.3, 2008, pp.201-207

14. A. N. Tewari, Pramod Agarwal, S.P.Srivastava,”Performance Investigation of modified

hysteresis controller with the permanent magnet synchronous motor drive”, IET Electr.

Power Appl.,Vol. 4, Iss.2, pp. 101-108, 2010

15. Rakesh Maurya, S.P. Srivastava and Pramod Agarwal,” Design & Implementation of

Transformer-Less Multi Output DC Power Supply”, International Review of Electrical Engineering

(I.R.E.E.), Vol. 6, n.7, pp. 2910-2919, Nov- Dec 2011.

16. J. A. Makwana, Ambarish Mishra, Pramod Agarwal and S.P. Srivastava, " Implementation of Low Cost Switched Reluctance Motor Drive using RT Lab", International Journal of Engineering Science & Advanced Technology, Vol-02 ISS-04,pp- 772-780, Jul-Aug 2012

17. Ambarisha Mishra , Pramod Agarwal, S.P.Srivastava “Brief Analysis and Field Oriented Control of Permanent Magnet Synchronous Motor Drive,” Vivechan International Journal of Research vol.3, pp. 53-69, 2012.

18. Ambarisha Mishra , Pramod Agarwal, S.P.Srivastava “A comprehensive analysis and implementation of vector control of permanent magnet synchronous motor,” International Journal of Power and Energy Conversion,2014,Vol 5, No 1,pp1-23

19. Giribabu.D, S.P.Srivastava and M.K.Pathak,"Rotor flux based MRAS for three level inverter fed induction motor drive using fuzzy logic controller", Int. Journal of Power Electronics, Vol 4, No 5, 2012, pp 463-478

20. Giribabu.D, S.P.Srivastava and M.K.Pathak," Speed sensorless Vector control induction motor drive with new integration algorthm for rotor flux based MRAS", accepted for publ., International Review of Electrical Engineering (I.R.E.E.), Jan2013

21. Maurya R, S.P. Srivastava and Pramod Agarwal," Symmetrical and asymmetrical controlled three-phase high frequency isolated DC DCconverter, Int.J.ElectricalPower & EnergySystems (Elsevier) , Vol.52, pp132-142,2013

22. Rakesh Maurya, S.P. Srivastava and Pramod Agarwal,” Multiphase High frequency Isolated DC - DC converter for industrial applications", International Journal of Emerging Powersystems, vol.15, Issue 1, pp 35-43, ISSN(print) 2194 - 5756, DOI: 10.1515 / ijeeps- 2013-0146, Jan.2014.

23. Rakesh Maurya, S.P. Srivastava and Pramod Agarwal," Design & Implementation ofThree phase resonant DC-DEC power converterfor low voltage high current Applications", Electric power componants and Systems, Taylor & Francis (Accepted)

24. Anil Chandrakanth S, Thanga Raj Chelliah, S.P. Srivastava, "Efficiency Determination of Induction Motor and its Sensitivity Analysis towards Parameter Variation," Int. Journal of Artificial Intelligence and Soft Computing, Vol 4,No 2-3/2014, pp144 - 163, ISSN(print) 1755 - 4950, DOI: 10.1504 / IJAISC 2014.062826

25. Jignesh A. Makwana, Pramod Agarwal and S.P Srivastava, "Design and Development of openloop CGSM for SR motor", JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH. - Vol 72(05), pp316-322, May 2013

26. Panda, A.; Pathak, M.K.; Srivastava, S.P.,"Fuzzy intelligent controller for the maximum power point tracking of a photo voltic module at varrying atmospheric condition", Journal of Energy Technologies and policy, Vol 1, no. 2, pp 18 - 27, 2011, ISSN(Online) 2225 - 0573

27. Panda, A.; Pathak, M.K.; Srivastava, S.P.," Solar direct torque controlled induction motor drive for industial applications", International Journal of Renewable Energy Research, Vol 3, no.4, pp 794 - 802, 2013, ISSN(Online) 1309 - 0127(in Scopus)

28. Panda, A.; Pathak, M.K.; Srivastava, S.P.," A single phase photovoltaic Inverter control for grid connected system", Accepted with minor revision in Journal of Electric power components and systems, Taylor and Francis (SCI)

National Journal:

29. S.P.Srivastava, V.K.Verma, Bhim Singh, "Performance analysis of load commutated

inverter fed syn. Motor drive", JIE(India), Vol. 73, part EL-5, Dec 1992, pp 289-293

30. Bhim Singh , Man Mohan, S. P. Srivastava, "Microcomputer controlled Starting scheme

for load commutated inverter fed cage induction motor drive", JIE (India), Vol. 76, May

1995, pp 23-28

31. Bhim Singh , Man Mohan, S. P. Srivastava," Microprocessor based starting and speed

control of DC link commutated inverter fed cage motor drive", IETE Tech. Review, Vol. 12

No. 2, 1995, pp 107-117

32. C.Thanga Raj, P.Agarwal, S.P.Srivastava, “Indian Standard IS 325: A review”,

Engineering Advances ISSN 0971-2968, High Tech Publications, Mumbai, Vol.19,No.4,

April 2007, pp. 24-32

33. Pramod Agarwal, S.P.Srivastava, “ Implementation of Multilevel PWM Inverter

using PC”, JIE(India), Vol. 88, September 2007, pp. 52-57

34. C.Thanga Raj, S.P.Srivastava, P.Agarwal,”Situation analysis- Industrial applications for

induction motor”, Electrical India,March 2008,pp. 70-73

35. P.Parthiban, P.Agarwal, S.P.Srivastava,”Duty ratio based space vector modulation for

Current Source Inverter fed Induction Motor drive”, i-manager’s journal on Electrical

Engineering, Vol.1, No.4, April - June 2008, pp.51-56

36. C.Thanga Raj, P.Agarwal, S.P.Srivastava ,“Deviation in the performance of a three phase

induction motor under different unbalanced phase voltages with same unbalanced factor”,

Journal of Electrical Engineering, Vol.1, No.3, Jan. 2008, pp. 7 - 12

37. C.Thanga Raj, S.P.Srivastava, P.Agarwal , “Optimal design of poly phase induction motor

using Improved Particle Swarm Optimization”, Journal of Electrical Engineering, Vol.1,

No.4, April 2008, pp. 45 – 50

38. C.Thanga Raj, S.P.Srivastava, P.Agarwal, “ Improving energy efficiency in partial loaded induction motor – using power electronics controller” , Journal on Engineering and Technology, Vol.1, No.2, 2006, pp 13-17

39. Jignesh A. Makwana, Pramod Agarwal and S.P Srivastava, "Design and Development of openloop CGSM for SR motor", JOURNAL OF SCIENTIFIC AND INDUSTRIAL RESEARCH. - Vol 72(05), pp316-322, May 2013

40. Rakesh Maurya, S.P. Srivastava, Pramod Agarwal, “Multi-phase High Frequency Isolated DC-DC

Converter for Industrial Applications,”  International Journal of Emerging Electric Power

Systems. Volume 15, Issue 1, pp. 35–43, ISSN (Print) 2194-5756, DOI: 10.1515/ijeeps-2013-

0146, January 2014

41. Rakesh Maurya, S.P. Srivastava, Pramod Agarwal, “Design and Implementation of Three-Phase

Resonant DC-DC Power Converter for Low Voltage High Current Applications,” Electric Power

Components and Systems, Taylor& Francis, (Accepted).

Discussion:42. S.N.Singh, S.P.Srivastava, Discussion on “Analysis of AC chopper fed dc series motor”,

JIE(India), Vol 60 Pt EL 1,Aug.1979, pp 21-22, paper by Krishnamurthy, G.K. Dubey,

G.N.Revankar published in IE(India) , Vol 59, Pt - EL 1, Aug. 1978, p 1

International Conferences:

43. G. K. Singh, S.P.Srivastava, "Analysis of syn. Alternator for arbitrary Displacement

between multiple winding sets", International Conf. On computer applications in Electrical

Engg.- Recent advances, Sept. 1997

44. Amar Nath Tewari, Pramod Agarwal, S.P.Srivastava, "Analysis and Simulation of PWM

boost rectifier", International conf. On computer Application in Electrical Engg. - Recent

advances, Feb. 2002, pp 347-359

45. S.P.Srivastava, Pramod Agarwal, K.V.V.Suresh, “Simulation study on variable speed

Wind energy conversion system using MATLAB/ Simulink”, First International Conf. On

Renewable Energy, 6-8, Oct. 2004, organized by CBIP & NPTI at New Delhi, PG-112-124

46. D.Chaitanya, Agarwal.P, Srivastava. S.P., “Modelling simulation and analysis of induction

motor drive using field oriented control”, International conf. On Computer application in

Electrical Engineering – Recent advances CERA-05, held at IIT Roorkee, 29th Sept. – 1st

Oct.2005

47. P.Parthiban, P.Agarwal,S.P.Srivastava, “ A simplified Space-Vector Modulated Control

Scheme for CSI fed IM Drive”, 3D-21,IEEE International Conf. Power Electronics, Electric

Drive and Energy System, PEDES-2006, held at IIT Delhi on 12-15 Dec. 2006 Digital

Object Identifier 10.1109PEDES 2006 344224, also recommended for publication in IEEE Trans. on Industry Applications

48. C.Thanga Raj, P.Agarwal, S.P.Srivastava,” Performance Analysis of a Three-phase

Squirrel –Cage Induction Motor under Unbalanced Sinusoidal and Non-Sinusoidal Supply

Voltages’, 1C-02,IEEE International Conf. Power Electronics, Electric Drive and Energy

System, PEDES-2006, held at IIT Delhi on 12-15 Dec. 2006 pp1-4,Digital Object Identifier

10.1109PEDES 2006 344353

49. C.Thanga Raj, P.Agarwal, S.P.Srivastava ,“Deviation in the performance of a three phase

induction motor under different unbalanced phase voltages with same unbalanced factor”,

International conf. on recent advancement and applications of computer in electrical

engineering, March 24-25, 2007 proc. (IEEE) , Engineering College Bikaner (India)

50. C.Thanga Raj, P.Agarwal, S.P.Srivastava, “ Particle Swarm optimized induction motor for

a textile mill load diagram”, IET- UK International conf.proc. on ICTES, Dr. MGR

University Chanai, 20 – 22 Dec. 2007,pp. 379-383 also recommended for publication in IETECH journal on advanced computation.

51. C.Thanga Raj, S.P.Srivastava, P.Agarwal, “ Cost minimization and its realization on

induction motor design via SPEED/PC – IMD”, IEEE Int. conf. INDICON – 08, IIT Kanpur,

Dec.11 – 13,2008, pp 46-50

52. C.Thanga Raj, S.P.Srivastava, P.Agarwal,” Realization of PSO based induction motor

design via SPEED/PC – IMD”, IEEE Int. conf. ICACC – 2009, Riverview Hotel, Singapore,

Jan. 20 – 22, 2009,pp 65-69

53. P.Parthiban, P.Agarwal,S.P.Srivastava,” space vector modulation for current source

rectifier”, International conf. on Power Electronics, drives and Power systems, POWER

COIN-2008, March,20 -21, 2008,SCT,Salem (TN, India)

54. T. R.Chelliah, J.G.Yadava,S.P.Srivastava, P.Agarwal,” Optimal energy control of induction

motor by Hybridization of Loss model controller based on Particle Swarm Optimization and

search controller”, Int. national Symposium on Biologically inspired computing and

application, Dec. 21-22,2009, Siksha O Anusandan University,Bhubnaswer(Also Apeared

in 2009 World Congress on nature and Biologically inspired computing (NaBIC 2009)

pp.1178-1183 Digital Object Identifier 978-1-4244-5612-3/09/$26.00@2009IEEE

55. G. Durgasukumar, M. K. Pathak, S. P. Srivastava “Performance evaluation of multi-level

inverter fed induction motor drive,” Proceedings of International Conference on Electrical

Power & Energy Systems, MANIT Bhopal, Vol. 1, pp. 689-696, August 26 -28, 2010

56. Maurya R., Agarwal P.,Srivastava S.P.,” Performance investigation of multiphase

converter for low voltage high current applications”, IEEE Int. conf. on Computer science

and Automation Engineering (CSAE), 2011,10-12 June 2011Shanghai (China), pp 211-

216 Digital Object Identifier: 10.1109/CSAE.2011.

http:// ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5953206

57. Maurya R., Agarwal P.and Srivastava S.P., "Performance investigation of Multipulse Converter

for Low Voltage High Current applications," IEEE International Conference on Computer Science

and Automation Engineering (CSAE), vol.1, pp.211-216, Shanghai, 10-12, June 2011.

58. Maurya Rakesh, Srivastava S.P., Agarwal P., “A Comparative Study of Symmetrical and

Asymmetrical Controlled High Frequency Isolated Multi-phase DC-DC Converter”, accepted for

publishing in 7th International Conference on Industrial and Information Systems (ICIIS), Indian

Institute of Technology Chennai, India,06-09 August 2012.

59. Jignesh A. Makwana, Pramod Agarwal, Member, IEEE and S.P. Srivastava, “Novel simulation approach to analyses the performance of in-wheel SRM for an electrical vehicle” Energy, Automation, and Signal (ICEAS), 2011 IEEE International Conference on, pp; 187 – 191, 2011. Status- Published

60. Jignesh A. Makwana, Pramod Agarwal and S.P. Srivastava, “ANN Based Sensorless Rotor Position Estimation for the Switched Reluctance Motor”, 2nd IEEE International Conference on Current Trends in Technology, Dec 2011. Status- Published

61. Jignesh A. Makwana, Ambarish Mishra, Pramod Agarwal and S.P. Srivastava, “Sensorless

Control of Switched Reluctance Motor Drive: An Analytical Method”, IEEE – International

Conference on Advances in Engineering, Science and Management March 2012.

62. A. Mishra, J. A. Makwana, P. Agarwal, and S. P. Srivastava, "Modeling and implementation of vector control for PM synchronous motor drive," in IEEE-International Conference on Advances in Engineering, Science and Management (ICAESM), 2012, pp. 582-585.

63. Ambarisha Mishra, Jignesh A. Makwana, Pramod Agarwal, and S.P. Srivastava “Mathematical Modeling and Fuzzy Based Speed Control of Permanent Magnet Synchronous Motor Drive,” The 7th IEEE Conference on Industrial Electronics and Applications (ICIEA 2012) Singapore, 2012 (accepted and presented).

64. Navneet Kumar, C. Thanga Raj, T. Radha, S.P. Srivastava, Economic Analysis of Induction Motor for a Mine Hoist Load Diagram,” World Congress on ICT, Uni. Of Mumbai, IEEE Computer Society Press, 2011, pp. 1310-1315. [Ei Compendex and ISTP Indexed]

65. Giribabu.D, S.P.Srivastava and M.K.Pathak, “Rotor Flux Based MRAS for Sensorless Operation

of Three Level Inverter fed Induction Motor,” in Proc. of IEEE SCEECS, MANIT Bhopal, Feb 29 th-

Mar 1st2012, pp. 1-4.

66. Giribabu.D, S.P.Srivastava and M.K.Pathak, “Modelling of Neural Network Based Rotor Flux

MRAS Speed Observer for Induction Motor Drive,” in Proc. of IEEE ICIIS, IIT Chennai, Aug 6th -9th

2012, pp. 1-6.

67. Tejne k.Sachin, Srivastava S.P.,” Comparative performance analysis of vector controlled

induction motor drive for neural controller and DSP implemented PI controller”, IEEE international

conf on comm..systems and network technologies (CSNT),11-13 May 2012,Rajkot(India), pp 274-

281, Digital object identifier 10.1109/CSNT.2012.67

68. Navneet Kumar, C. Thanga Raj, S.P. Srivastava "Energy Conservation Study on Induction

Motors Using MATLAB/Simulink for Enhancing Electric Machinery Courses," in Proc. IEEE Int.

Conf. Teaching, Assessment and Learning for Engineering 2012, The Hong Kong poly. University,

pp. 520-525, 2012.[ieeexplore, EI Compendex and ISTP Indexed]

69. Thanga Raj C., Navneet Kumar, S.P. Srivastava," Dynamic performance improvement of

induction motor under energy optimal control", 12th WSEAS Int. conf. on Apllication of Electrical

Engineering (AEE'13), Cambridge, MA, USA.Jan 13 - Feb1,2013, pp44 - 49, also awarded best

paper of conference

70. Thanga Raj Chelliah, Navneet Kumar, S.P. Srivastava, “Dynamic Performance Improvement of

Induction Motor Under Energy Optimal Control”, in Proc. Recent Advances in Electrical and

Computer Engineering, USA, pp. 44-49, 2013.

71. Navneet Kumar, C. Thanga Raj, S.P. Srivastava "Energy Conservation Study on Induction Motors

Using MATLAB/Simulink for Enhancing Electric Machinery Courses," in Proc. IEEE Int. Conf.

Teaching, Assessment and Learning for Engineering, The Hong Kong poly. University, pp. 520-

525, 2012.

72. Anil Chandrakanth, Navneet Kumar, C. Thanga Raj, S.P. Srivastava, "Sensitivity Analysis of

Model-Based Controller Applied to Loss Minimization of Induction Motor",  in Proc. IEEE Fifth India

International Conference on Power Electronics, Delhi Technological University, 2012.

73. Navneet Kumar, C. Thanga Raj, S.P. Srivastava, "Voltage Sag Effects on Energy-Optimal

Controlled Induction Motor With Time-Varying loads",  in Proc. IEEE International Conference on

Power Electronics, Drives and Energy Systems (PEDES-2012), CPRI Bangalore, India, 2012.

74. Navneet Kumar, Thanga Raj Chelliah, Radha Thangaraj, S.P. Srivastava, “Economical analysis

of induction motor for a mine hoist load diagram,” in Proc. IEEE Conf. Information and

Communication Technologies, pp. 1310-1315, 2011.

75. Rakesh Maurya, S.P. Srivastava, Pramod Agarwal, “Multi-phase High Frequency Isolated DC-DC

Converter for Industrial Applications" 5th International Conference on Computer Applications in

Electrical Engineering: Recent Advances (CERA-13), October 3-5,2013, at I.I.T. Roorkee, India.

76. Rakesh Maurya, S.P. Srivastava and Pramod Agarwal, “High Frequency Isolated LLC DC-DC

Resonant Converter for Low Voltage High Current Applications” has been accepted for publishing

in proceeding of IEEE International Conference on Power Electronics, Drives and Energy Systems

(PEDES 2012), Dec 16-19,2012, at I.I.Sc Bangalore, INDIA.

77. Maurya R., Srivastava S.P., Agarwal P., "A comparative study of symmetrical and asymmetrical

controlled high frequency isolated multi-phase DC-DC converter," 7th IEEE International

Conference on Industrial and Information Systems (ICIIS), 2012 , pp.1-6, 6-9 Aug. 2012 at I.I.T.

Madras, INDIA.

78. Maurya R., Agarwal P.and Srivastava S.P., "Performance investigation of Multipulse Converter

for Low Voltage High Current applications," IEEE International Conference on Computer Science

and Automation Engineering (CSAE), vol.1, pp.211-216, 10-12, June 2011at Shanghai, CHINA.

79. Kumar, Jayendra, R. S. Anand, and S. P. Srivastava. "Multi-Class welding flaws classification using texture feature for radiographic images." International Conference on  Advances in Electrical Engineering (ICAEE-2014), VIT University Vellore, january 9-11, pp. 1-4. IEEE, 2014.

80. Kumar, Jayendra, R. S. Anand, and S. P. Srivastava. "Flaws classification using ANN for radiographic weld images." International Conference on Signal Processing and Integrated Networks (SPIN- 2014), Amity University, Noida, February 20-21,  pp. 145-150. IEEE, 2014.

81. Panda, A.; Pathak, M.K.; Srivastava, S.P., "An improved power converter for standalone Photovoltaic system," Annual IEEE India Conference (INDICON), pp.1-6, 13-15 Dec. 2013.(Organized by IIT Bombay)

82. Panda, A.; Pathak, M.K.; Srivastava, S.P., "Grid tie inverter control for rooftop photovoltaic system," IEEE Fifth Power India Conference, pp.1-6, 19-22 Dec. 2012.

National Conferences:

83. S.P. Srivastava, V.K. Verma, Bhim Singh, "Steady state analysis of commutatorless DC

motor", 13th National system Conf., Dec 1989, IIT, Kharagpur (India), pp 122-125

84. S.P. Srivastava, V.K. Verma, Bhim Singh, "A novel technique for starting of self controlled

synchronous motor drive", National conf. In new strategies for Indus. Process

instrumentation & control, University of Jodhpur (India) March 1990

85. Bhim Singh, S.P.Srivastava, Govind Mohan, "Investigations on development and optimum

rating of three phase reluctance motor, "14th NSC-1990, March 1991 AMU, Aligarh pp

d3/1-d3/06

86. Bhim Singh, S. P. Srivastava, Govind Mohan, "Effect of voltage and load Variations on the

performance of three phase reluctance motor", National conf. On rotating machines,

Proc. Of ELROMA-92, Bombay Jan. 1992, pp VA 52-VA-60

87. Vinay Pant, G.K.Singh, S.P.Srivastava, " Improved reliability and High power rating in AC

drive by means of phase redundancy", NPSC 98, Oct. 1998, pp 590-594

88. Amar Nath Tewari, Pramod Agarwal, S.P.Srivastava, "Controller Algorithm for PMSM

drive', National seminar on Soft computing & its Engg. Application, MBM Engg. College,

Jodhpur, Feb. 2002, Vol. 1, pp 242-248

89. K.A. Rafe, S. P. Gupta, S.P.Srivastava, "Experimental Investigation on two step regulator

fed single phase induction motor fan drive", National conference on modern trends in high

voltage and power system Engineering, Jabalpur (July 7-8, 2003), pp 36-40

90. S.P.Srivastava, Pramod Agarwal, K.V.V.Suresh, “ Wind Energy Conversion Systems”, All

India Seminar on Energy and Environment, Feb. 28-29, 2004,organized by IE(I) at

Dehradun, pp. 319- 331

91. S.N.Singh, S.P.Srivastava, Pramod Agarwal, “ Steady state analysis of grid connected

commutatorless dc generator”, 13th NPSC held at IIT Madras, 27 th – 30 th Dec.

2004,pp.166-171

92. P.Parthiban, Pramod Agarwal and S.P.Srivastava.”Field oriented control of Induction

motor using current source inverter with trapezoidal modulation”, Second National conf.

on Cutting Edge Technologies in Power Electronics & industrial Drive (PCID-2006),March

24-25,2006, pp 352-355, Organized by Bannari Inst. Of Tech., Sathya mangalam

93. Rakesh Maurya, S.P.Srivastava,” Wind Energy In India:Present and Future”,Proceedings

of the 11th National Conference on Recent Developments in Mechanical Engineering,

MED TIET,Patiala, Nov. 10-11 , 2006,pp. 402-407.

94. Rakesh Maurya, S.P.Srivastava,”Performance Investigations of Grid connected AC-DC-

AC power converter for variable speed Wind Energy”, 1st Northern Region

Conference,CET IFTM Moradabad, 19-20 Aug.2006

95. S.P.Srivastava, Pramod Agarwal and Shanti Swaroop D.,” Analysis of voltage control of a

self excited Induction generator using a current controlled voltage source Inverter (CC-

VSI)”, NPSC-2006, 26-29 Dec.2006 held at IIT Roorkee

96. Rakesh Maurya, S.R.Arya,S.P.Srivastava,” Analysis of grid connected power converter for

variable speed wind energy conversion”,31st NSC-2007, MIT Manipal PP 147

97. P.Parthiban, P.Agarwal,S.P.Srivastava, “A Simplified space vector modulation for CSI fed

indirect field oriented control IM drive”, Proc.of third National Conf.- PCID 2007, Deptt. Of

EEE, Bannari Inst. Of Tech., Sathya mangalam , Feb.16-17,2007, pp.93-96.

98. S. Anil Chandrakanth , Thanga Raj Chelliah, S. P. Srivastava and Radha Thangaraj, “In-situ Efficiency Determination of Induction. Motor through Parameter Estimation,” Proc. Advances in Intelligent and Soft Computing (SOCPROS), 2012, IIT Roorkee, Volume 130, 2012, pp. 689-700. [Springerlink indexed]

99. Giribabu.D, S.P.Srivastava and M.K.Pathak, “Fuzzy Logic Based MRAS for Speed

Sensorless Operation of Induction Motor Drive,” in NPEC, BESUS Kolkata, Dec 19th-22nd

2011, pp. 1-6.

List of Paper (Communicated)1. A. N. Tewari, Pramod Agrawal, S.P. Srivastava, "Implementation of Modified Hysteresis

current control for PMSM drive", IEE proc. Electric power Application

2. A. N. Tewari, Pramod Agrawal, S.P. Srivastava, “Performance comparison of PMSM

drive with optimal PI gains and optimal Fuzzy – PI input scale factor”, IEE proc. Electric

power Application

3. C.Thanga Raj, P.Agarwal, S.P.Srivastava, “Particle Swarm optimized operating cost of

induction motor drive for variable load and speed applications”, Journal of Electrical

System, Algeria

4. C.Thanga Raj, P.Agarwal, S.P.Srivastava, “ Application of different evolution in the

economics of induction motor serving in textile industry”, International Journal of Computer

Science (IAENG Publ.HongKong)

5. Rakesh Maurya, S.P. Srivastava, Pramod Agarwal, “Performance Investigations of Isolated DC -DC C onverter with Multi-Phase Rectification suitable for Industrial Applications,” IET Electric Power Applications (under review).

6. Rakesh Maurya, S.P. Srivastava, Pramod Agarwal, “Modelling and Simulation of Inter-connected

DC-DC Converter Modules for High Current Applications,” IET Power Electronics (under review).

Sponsored Project (Completed)

1. High performance induction motor drive AICTE, as Co- Investigator

2. Performance analysis of six phase syn. Machine with AC & DC stator connections for

economic and effective AC-DC supply with improved reliability, CSIR , as Co- Investigator

3. Microcomputer controlled CSI FED Induction Motor Drive for Traction Application

AICTE, as Co- Investigator

4. CAD and Analysis of Optimum Converter-motor pair for a syn. Drive based on effective

harmonic utilization UGC, as Co- Investigator

5. Modernization of Electrical Machine Laboratory, Under MODROB,MHRD scheme, as Co-

Investigator

Testing/ Consultancy Project (Completed)

1. Testing of different type of Motors

2. " On construction technology " at Center for cont. Education under SWALAL YOJANA,

U. P. Govt.

3. Design & Standarisation of Technical Specification in respect of Distribution Transformer

UPSEB, Lucknow

4. Technical safety audit for rope way at Chandidevi, Usha Breco Ltd. Sahibabad, Ghaziabad

5. Safety inspection Mussurie Ropeway, Massurie

Course Conducted1. Short term course on , " Modern trend of power electronics and electric drive" Under QIP from 30

June-4 July, 2003

Subjects Taught:U.G.Level:1. DC Machine and Transformer

2. Induction Machine

3. Synchronous Machine

4. Electrical Machine Design

5. Electro Mechanical Energy Conversion

6. Electric Traction Utilization

7. Electrical Science

8. Electrical Technology

9. Electric Drive

10. Power Electronics

P. G. Level:1. Asynchronous Machine and Transformer

2. Electric Drive

3. Auxiliary Power Apparatus

4. CAD of Power Apparatus

5. Power electronics

6. Selected topics in Machines and Transformer

7. Analysis of Electrical Machine

Course/ Syllabus DevelopedP. G. Level:1. CAD of Power Apparatus

2. Selected topics in machines and transformer

3. Special Machine

4. Analysis of Electrical Machine

5. Electric Drive I & II

U.G. Level:1. DC Machine and Transformer

2. Induction and Synchronous Machine

3. Power Electronics

4. Electrical Technology

5. CAD of Power Apparatus

6. Electric Drive

7. Electric Traction Utilization

Administrative ResponsibilitiesInstitute Level:1. Asst. Warden, Jawahar Bhawan 1982-1985

2. Astt. Warden, Azad Bhawan 1988-90

3. Warden, Azad Bhawan 1990-91

4. Co-coordinator Pre Data entry 1996 & 97

5. Part time Faculty (Dy. Coordinator) C.C.E. 1994-98

6. Chief Warden, Rajendra Bhawan April 1998-Dec. 2002

7. Dy. Chief Advisor (Finance) Hobbies Club May 2000- Apl 2006.

8. Member (Senate) 2001-05

9. Member (Academic council) 1990-92

10. Member (Board of UG Studies) 2007 - 08

12. Member (Board of Academic Research) Jan.2009 - contd.

13. Chief Advisor Sports Sept 2008 – Dec.2009

14. Member coordinating Committee (IIT.Himanchal Pradesh) 2009 - 2010

15. Assoc. Dean Student Welfare (Discipline) Jan 2009 – Dec2010

16. Co-Coordinator, Cognizance-2010

17. Member, Institute Hospital Advisory Committee

18. Convener, Institute Anti Ragging Flying Squad Committee Jan 2009 - Dec.201019. Member, Vigilance Committee ,IIT Roorkee Jan 2009 - Dec.2012

20. Member, Security Committee ,IIT Roorkee Jan 2009 - Decf.2010

21. Member, Institute Commercial Establishment committee, Jan 2009 – Dec.201222. Assoc. Dean Student Welfare (Mess) Jan 2010 – March 13

23. Coordinator, Cognizance-2013

Departmental Level1. OC Store 1990-94 and

2007 -2009

2. OC Time Table (UG & PG) 1990-94

3. OC Maintenance 1990-94

4. OC Machine Lab Continuing

5. OC B. Tech. Project 2000-2003

6. Faculty Adviser INFLUX/ COGNIZANCE 1999-2003

7. Treasurer CERA-01 Feb.2002

8. Member DUGS 2004- 2008

9. Chaiman,DRC Jan. 2009 – July2011.

July 2013 - May2014

10. Convener CERA-09 Feb.2010

11. OC CAD Lab July 2011 – cont.

12. Chaiman,FPSC July2011.- cont.

13. Coordinator,ACCTRIES-2014 Feb 17,18,2014

Outside Institute Level:1. Member BOS, UTU Dehradun2. Mentor, TEQIP II Project, MNIT, Bhopal3. Mentor, TEQIP II Project, Thaper University, Patiala4. Mentor, TEQIP II Project, NITTR,Chandigarh