Brought to you by the Energys Group

Energys GroupSave It Easy® has rapidly become the retrofit solution of choice forenergy management professionals and it is not hard to see why. Since2006, our patented technology has saved our customers over 95,000tonnes of carbon, not to mention over £40 million of savings on theircombined electricity bills.

Save It Easy® was launched as a result of our consultancy experiencein advising clients on lighting energy savings. Save It Easy® is now amainstay of our business activities with over one million units soldand over 1,000 end users ranging from SMEs to schools, militaryestablishments and retail outlets.

Our business is constantly evolving and we are committed to providinglow carbon retrofit solutions. We now supply other retrofit productsfrom LED lights to boiler management systems and controls. We alsoprovide a carbon-cutting sound investigation service to expertlyidentify compressed air or pressurised gas leaks.

www.saveiteasy.co.uk

3 37-65% energy savings3 Lower lighting costs3 Reduced carbon footprint3 Rapid payback3 Better light quality3 No disruption of supply wiring3 Easy funding options3 Over a million units in use

Save It Easy® Retrofit Lighting Upgrades

How ‘Save It Easy®’ Units WorkRetrofit Save It Easy® conversion units simply plug into existingconventionally ballasted luminaires, transforming them electronicallyto high frequency ballasted fitments of correct type and size to acceptmodern high-efficiency tri-phosphor T5 and T8 tubes.

• Minimise installation work

• Exploit latest lamp technology

• Generate major energy, cost and carbon savings

• Fit all luminaire sizes

• Conforms to all relevant European and International technicaland safety standards.

• Rated at 50,000 hours

• Energy savings up to 65%

With over a million units sold and installed in schools, hospitals, offices etc.this diverse and proven technology can not only reduce your lighting costsbut also reduce disruption time and maintenance costs.

With a wide range of ‘Save It Easy®’ units available it is easy to choosethe right adapter to maximize your savings or increase your light outputdepending on your application.

Before After Savings

Length Application Existing LampTotal

WattageNew Lamp

TotalWattage

Watts Carbon %

2ft (590mm) Maximise savings T8 18W 27W T5 8.5W 11W 16W 22KgCO2 59%

2ft (590mm) Maximise savings T12 20W 31W T5 8.5W 11W 20W 28KgCO2 65%

2ft (590mm) Increase light output T8 18W 27W T5 14W 16W 11W 15KgCO2 41%

2ft (590mm) Increase light output T12 20W 31W T5 14W 16W 15W 20KgCO2 48%

4ft (1200mm) Maximise savings T8 36W 46W T5 21W 24W 22W 29KgCO2 48%

4ft (1200mm) Maximise savings T12 40W 50W T5 21W 24W 26W 35KgCO2 52%

4ft (1200mm) Match light output T8 36W 46W T5 24W 28W 18W 24KgCO2 39%

4ft (1200mm) Match light output T12 40W 50W T5 24W 28W 22W 29KgCO2 44%

5ft (1500mm) Maximise savings T8 58W 71W T5 28W 31W 40W 53KgCO2 56%

5ft (1500mm) Maximise savings T12 65W 78W T5 28W 31W 47W 63KgCO2 60%

5ft (1500mm) Match light output T8 58W 71W T5 32.5W 36W 35W 47KgCO2 49%

5ft (1500mm) Match light output T12 65W 78W T5 32.5W 36W 42W 58KgCO2 54%

5ft (1500mm) Increase light output T8 58W 71W T5 35W 39W 32W 43KgCO2 45%

5ft (1500mm) Increase light output T12 65W 78W T5 35W 39W 39W 52KgCO2 50%

6ft (1800mm) Match light output T8 70W 84W T5 48W 52W 32W 45KgCO2 38%

6ft (1800mm) Match light output T12 75W 95W T5 49W 52W 43W 60KgCO2 45%

8ft (2400mm) Match light output T12 125W 175W T8 70W 77W 98W 137KgCO2 56%

Isolate power, remove starterand T8 lamp and recycle

Fix Save It Easy® to T5 lampand install all components

Before. T8 with switchstartballast consuming a total of 27W

After. Saving 16W with no flickerlight and lower maintenance

‘Save It Easy®’ Linear Fluorescents Savings

Brought to you by the Energys Group

www.saveiteasy.co.uk

Before After Savings

Product Type Application Existing LampTotal

WattageNew Lamp

TotalWattage

Watts Carbon %

2D Maximise savings 2D 28W 34W LED 12W 12W 22W 30KgCO2 65%

GU10/MR16 Maximise savings GU10 50W 50W LED 5W 5W 45W 62KgCO2 90%

PL Maximise savings PL 14W 14W LED 5W 5W 9W 13KgCO2 64%

LED Upgrade SolutionsThe Energys Group has also looked into other energy efficientlighting solutions for existing fittings:

LED Replacement for 2D Lamps• Replaces your 2D CFLs existing fitting with LED Replacements

for a 2D lamp

• Wattage is reduced from 33W to 12W

• Last typically 6 times longer or even more in high switchingenvironments

• Simple to retrofit in both switchstart or high frequency fittings

• Available as an emergency version or a complete new fitting

‘Save It Easy®’ LED lamps – GU10/MR16• Existing halogen fittings can be replace with LED GU10 or MR16

• Achieve 90% energy savings or up to 45W per lamp

• Simple lamp replacement

‘Save It Easy®’ LED PL Lamp• Replacement for 2 pin PL G24 lamps

• Reduce the wattage from 14W to 5W

• Last 6 times longer

2D Before

2LED After

GU10

MR16

PL lamp

‘Save It Easy®’ LED Savings

Brought to you by the Energys Group

Other Energy Saving Devices by the Energys Group Dynamic Burner Management Unit – Designed to cut your gas costs up to 30% and reduce the time your boiler will burn gaswithout affecting the temperature of your building, giving your boiler more intelligence.

Power Optimisation – This device fits between the electricity supply and lighting distribution board. Through a combination ofVoltage Optimisation, Power Factor Correction and Harmonic Filtration, the consumption and cost of electricity is typically reducedbetween 20% and 40%.

Compresses Air and other gases (Sound Survey) – This service will detect leaks despite high ambient noise levels and will enablesavings of £700 per 3mm hole.

Standards and LegalitiesIt is very important to us that Save It Easy® fully conforms to all relevant European and International technical and safety standards.Please see our website www.saveiteasy.co.uk for our full EN accreditations list.

InstallationInstalling Save It Easy® is a simple task providing our instructions – which are available on our www.saveiteasy.co.uk – are followed.We can provide on-site training for your fitters as well as a commissioning service to ensure correct installation and project sign-off.

Energys can provide a complete turnkey service from survey, energy calculation through to a quality service using our own fitters.Alternatively, we can signpost you to our nationwide network of approved installation partners.

www.saveiteasy.co.uk

Please visit our website www.saveiteasy.co.uk for further information on installation, case studies, funding and more.

Energys Group, 8 Jayes Courtyard, Jayes Park, Ockley, Surrey RH5 5RR

e-mail: info@energysgroup.com Tel: 01306 621546 Fax: 01306 621525

Warranty• Rated at 50,000 hours

• Tube life of over 20,000 hours depending on switching cycle

• Save It Easy® units are backed by a two year full replacement warrantyagainst operational failure or manufacturing fault of ballast and of tube