Upload
vuongphuc
View
225
Download
0
Embed Size (px)
Citation preview
Reve_Vib_011 VIBRATION SENSOR
The vibration velocity transducers Reve_Vib_011 are intended for continuous monitoring of rotating m a c h i n e r y f o r t r e n d i n g o r s h u t d o w n .
The rugged, shielded and electrically case isolated allows applications under harsh environmental conditions. The sensors provide a filtered and rectified output signal which is compatible with 4-20 mA current loop. Hence it can be directly connected to standard equipment such as PLCs, panel meters or current relays etc. Additional components/ equipment for sensor supply and signal conditioning is not necessary. The sensor can sense frequency ranging from 10 Hz to 1000 Hz.
Sensor having stainless steel (304 grade) housing and hermitically sealed ETFE Cable. With protection IP65 It provides protection against dust and is ingress resistant. It also provides parallel analog through M12 (BNC) connector for analysis purpose. It’s compact Size allows for installation in tight places.
Typical Applications:
Ÿ Vibration measurement in the rugged environments of industrial machinery monitoring. It allows continuos -trending of overall machine vibration.
Ÿ Vibratin monitring of Tables and surfaces.Ÿ Vibration monitoring of Racks and Panels.Ÿ Vehicle vibratin monitoring.
B/190 GIDC Electronic estate sector-25,B/H Madhur dairy
Pin:382024 GandhinagarGujarat India
Contect us :PIN:382024 GandhinagarGujarat India
B/190 GIDC Electronic estatesector-25,B/H Madhur dairy
Web: www.reveautoma�[email protected]
info@reveautoma�on.com
Product Highlight
Ÿ Loop Powered Vibration SensorŸ Robust & compact s.s. (304) body Ÿ Simple to install & operateŸ Easy to integrate with standard controllers & existing control panels. Ÿ High sensitivityŸ Good frequency response Excellent linearityŸ Shielded constructionŸ Analog output at(BNC) M12 for Monitoring & Analysis Ÿ Output:4 to 20 mA.Ÿ Withstand high shock
Features
Ÿ Working Voltage:12V-32V DC Loop Powered Sensor.Ÿ High immunity against Interference.Ÿ Cost Effective.Ÿ Wide dynamic range 10Hz to 1 Khz.Ÿ Stainless steel Case.Ÿ ETFE Cable have higher tensile strength elongation.
Technical Specifications
Opera�ng Temperature 0 to 70 C
Output(Typically) 4 to 20 mA
B/190 GIDC Electronic estate sector-25,B/H Madhur dairy
Pin:382024 GandhinagarGujarat India
Contect us :
Reve_Vib_011 Feature & Highlight
Protec�on Grade
Power(Loop Powered)
Sensi�vity
Frequency Response
Connector Output(Monitoring)
Case Material
Moun�ng
Cable Length
IP 65
12 V. to 32 V.
100m V/g or be�er
10 Hz - 1 Khz
M 12 (BNC)
Stainless steel(304 Grade)
M6 Tapped hole in base of sensor
10 meter
Web: www.reveautoma�[email protected]
info@reveautoma�on.com
PIN:382024 GandhinagarGujarat India
B/190 GIDC Electronic estatesector-25,B/H Madhur dairy
Dimension And Drawing
Wiring Schema�c
DC
PowerSupply
12-32V DC
The machine/ surface on which the sensor is mounted, must be ‘earthed’ properly.It is recommended to connect the -ve terminal of voltage to earth potential to minimize interference.
30 mm
10 mm
80 mm
30 mm
PLC
M 12 (BNC) Connector for Analog ooutput for Vibration Analysis
+
-
M6 stud
Web: www.reveautoma�[email protected]
info@reveautoma�on.com
Earth
Wire ColourLoop +
Loop - Shield
RedBlueBlack
PIN:382024 GandhinagarGujarat India
B/190 GIDC Electronic estatesector-25,B/H Madhur dairy
Red
Blue
Black