QUOTATION #M1945-07: HU63A-5X / F30i

HU63A-5X REVISED FINAL CONFIGURATION for:CURTIL NORTH AMERICA LLC

1 ONLY MITSUI SEIKI HIGH PRODUCTION HORIZONTAL MACHINING CENTER MODEL HU63A-5X WITH 31iM FANUC CONTROL(In accordance with our standard terms and conditions)HU63A-5X Base Price, DDP Valencia, CA, U.S. Dollars $

OP100-80 12,000 RPM Spindle (2 speed dual winding motor$ Spindle taper: ISO 7/24 (50 T) with ceramic bearingsSpindle diameter: 100 mm Ø (3.9" Ø)Tool clamp force: 2,500 kgs (5,510 lbs) or moreDual winding built-in AC 30 / 25 kw (40 hp max) motor,

direct (gearless) drive Motor Manufacturer: FANUC Alpha P30 Spindle speed S4 digit direct command : 120 - 12,000 RPM

(Override 50 -120%) Low Range (Winding): 120 - 1,620 RPMHigh Range (Winding): 1,621 - 12,000 RPMSpindle Torque: Max 420 Nm (310 ft-lbs) 350 / 239 Nm

(10 min / cont. rating)Includes OP140-35: 4,000 Kcal chillerSpindle lubrication: Oil & Air lubricationAir requirement: 06 MPa, 1.2 m³/min (80 psi, 42 CFM) Power Required for Machine: AC 200 / 220 V 3 phase,

50 / 60 HZ, 75 KVACharacteristic of acceleration/deceleration of spindle: 13 sec

/ 12,000 RPMTool Change Time:

Tool to Tool: 2.5 secChip to Chip: 6 sec.

OP140-35 Spindle head chiller (4,000 Kcal) $ 400 W-4P pump motor, 600 W-2P compressor motor, and 66 W x 2 fan motor, tank capacity 50 L Cooling capacity: 4,000 Kcal/h (over 12,000 RPM spindle)

OP140-90 Compensation of spindle thermal displacement for stabilizing Z axis growth for spindle over 12,000 RPMspindle growth data is mapped and compensated dynamically during the machining program.Note: Matrix type

MITSUI SEIKI QUOTATION #M1945-07 July 17, 2008

1 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

ST150-05 Spindle power indicator on LCD display

ST150-10 Spindle RPM indicator on LCD display

OP170-10 5-axis rotary / tilt trunion style table.$ Infinite B axis with A axis cradle capable of +20º ~ -110º

range of motion, dual counter balance cylinders andhigh precision digital rotary encoders

ST180-90 X, Y & Z axis Glass Scale feedback for standard stroke machine (X = 35.43", Y = 31.5", X = 31.5)

Positioning accuracy ±0.001 mm (at 20º C)Repeating accuracy ±0.001 mm

ST181-65 X, Y & Z axes Linear scale feedback (Precision Glass Scale)B axis: High Precision rotary digital encoderA axis: Rotary precision scale (Inductosyn scale)

OP212-16 180 tools storage ATC (Single Magazine), random selection $Tool storage capacity: 180 tools (Single Magazine)Tool selection mode: Fixed pot number, bi-directional random

selectionTool shank: 50 T (JIS B6339)Maximum tool length: 450 mm (17.7") (Max. length 450mm

17.7" available W/in tool weight 15 kgs/33 lb.)Maximum tool diameter: 125 mm Ø (5" Ø) Maximum tool diameter w/o adjacent tools: 380 mm Ø

(15" Ø) for T shape 216 mm Ø (8.5" Ø) 216 mm fullcircle cutter

Maximum tool weight: 25 kg. (55 lb.) Maximum moment: 31.4 Nm (3.2 kgm) Tool change time (tool to tool): 2 seconds Tool change time (chip to chip): 15 sec (from stroke center if

rapid traverse is 24 M)

ST230-15 Sub operation box for Automatic Tool Changer(Only equipped for single magazine type ATC)

2 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

ST240-25 Table Pallet Working surface: 630 x 630 mm (24.8" x 24.8")B axis infinite (option): 0.001° (360,000 positions)Table indexing time: 3 sec. / 90°Positioning & clamping method: Circle & diamond shaped pinMax. permissible load on pallet (with A axis Hor.): 700 kg

(1,540 lb.)Maximum moment (with Axis Vertical): 4000 kg/Cm (289 ft-lbs)

from surfacePallet Clamp Force: 10,000 kg. (22,200 lbs)Surface on pallet: M16 tapped hole, 24 places / 125 mm,

grid hole pattern Height floor to table top (APC Side): 1,470 mm (57.87") Height floor to table top (Machine Side): 1,450 mm (57.08")

ST240-85 Automatic pallet changerNumber of pallet: 2 x (630 X 630 mm) with screw plugs Pallet change style: Front boxer type installed in front

of machinePallet changing time: Approximately 40 seconds Pallet turn on APC: Manual pallet turning device by each 90°NOTE: Pallets will have tapped holes on 100mm centers (instead of 125mm)

OP250-25 Interface link for link to external transfer system (FMS)$

OP250-35 Modification charge for FMS (hardware side)$ Modification for Automatic pallet changer

(w/o pallet turning device) to link with External pallettransfer and storage system for FMS (hardware side)

OP311-30X Coolant shower from ceiling Preparation & Piping only

OP320-90 Spindle through coolant preparation (1,000 psi) (Includes piping, wiring, software & rotary joint, 70 kgf/cm²)

OP325-22 Mist Collector Preparation Only. Includes: Vent Hole in Guarding, wiring, switch and logic.

OP330-15 Work piece cleaning gun (squirt gun type shower nozzle) Note: The tank of coolant system is used for this system

OP335-15 Coolant chiller w/o heater Submersion type coolant chiller unit without heating elementNote: Requires either OP350-75 or OP350-85

3 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

OP340-15 Spin Window (electric type) for high pressure coolant systems

ST350-40 Chip conveyors built-in coil type Built-in chip conveyori) Between saddle and column: Coil type 0.2KW, 15 RPMii) Between saddle and APC: Coil type 0.2KW, 15 RPM

OP370-20 Hydraulic oil chiller 400 W-4P pump motor, 600 W-2P compressor motor Tank capacity: 80 L

OP400-25 RENISHAW OMP-400 type probe with Inspection Plus software OMP-400 Probe UpgradeSystem software consumes 65m of part program memory and

(optical interface with Non-lobing Strain gage technology probe)

Note: OP400.15 requires:High speed skip (F3031-288) Coordinate System Rotation (F3031-129)

OP400-20 ADDITIONAL OMP-400 Type Probe

OP415-05 Ring Gauge Spindle probe calibration gauge

OP420-60 Non contact laser tool setting device Renishaw NC-4 non contact laser tool setting device and

software for use with broken tool detection or tool length, diameter setting, with additional capability for in process tracking of tool condition

OP500-10 Code output *M111 - M117 *4 relays : (Code command/3 sets, Strobe/1 set)

OP500-15 Contact output *M111 - M114 *4 relays

OP500-25 Automatic power breaker (by M30)

OP500-35 Beacon light (3 tier) 3 lights for alarm (red), cycle on (green), & stop (yellow)M00, M01, M02, M30 (Signal light)

4 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

OP500-95 Load monitor function The load of the spindle and the feed axes are displayed andthe control of load detection can be done by the load data onthe load data table.M400, M401 and M402 are used for the command of this function.60 load data tables are prepared and if you need more than 60 load data, the load on any one axis is detected by commanding M402A**B**.The suitable cutting load(% of maximum load) will automaticallybe set on Normal when you select one of the load from No. 1 to No. 60 and press [DECIDE] (during actual machining).Normal + 30% on Warning and Normal + 50 % on Alarm will alsobe set.It is also possible to change the data by manual setting on Normal, Warning and Alarm.

ST500-60 Work lamp

ST500-75 Machine leveling jack bolts and plates

OP500-85 Rigid tap function Synchronized Z Axis feed with spindle speed for

tapping without using tension/compression type tap holder(G84.2, G84.3) For high speed tapping with small tap

ST550-07 Whole machine cover with auto-door and spot light for machines with an APC

F3031-006 FANUC 30i CNC Control

F3031-010 10.4 inch LCD Monitor

F3031-021 3D TOOL COMPENSATION

F3031-023 3RD / 4TH REFERENCE POSITION RETURN: ( G30 P3, G30 P4)

F3031-026 ABSOLUTE / INCREMENTAL COMMAND: ( G90 / G91 )

F3031-030 ADDITION OF CUSTOM MACRO COMMON VARIABLES 600 Custom Macro option is required

F3031-036 ADDITIONAL WORK PIECE COORDINATE 48

5 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

F3031-038 ADVANCED PREVIEW CONTROL

F3031-042 AI CONTOUR CONTROL II (LOOK AHEAD BLK MAX. 200) Cutting feed interpolation before linear acceleration/deceleration, Auto-corner override, Feed speed clamp bycircular radius, Bell shape acceleration/decelerationbefore look ahead interpolation (Look ahead block ; Max 200)Max 200)

NOTE: AICC must be disabled prior to invoking Macrobased programs

F3031-045 ALARM FOR OVER CURRENT ON SPINDLE LOAD

F3031-048 ALARM HISTORY DISPLAY

F3031-051 AUTOMATIC ACCELERATION / DECELERATION

F3031-054 AUTOMATIC CORNER DECELERATION

F3031-057 AUTOMATIC CORNER OVERRIDE

F3031-060 AUTOMATIC DATA BACKUP

F3031-063 AUTOMATIC REFERENCE POSITION RETURN: G27 (ZERO check), G28 (return to zero), G29 (return from zero)

F3031-066 AUXILIARY FUNCTION (M CODE): 3 DIGITS

F3031-069 AUXILIARY FUNCTION LOCK: NO MOTION ON M, S, T FUNCTIONS

F3031-072 AXIS INTERLOCK

F3031-075 BACKGROUND EDITING (Dynamic graphic, cutter path display, manual guide included)

F3031-078 BACKLASH COMPENSATION: MAX 9999 PULSES on each axis

F3031-081 BELL SHAPED ACCELERATION / DECELERATION BEFORE pre-reading interpolation

F3031-087 BI-DIRECTIONAL PITCH ERROR COMPENSATION

6 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

F3031-089 Block Restart

F3031-093 CANNED CYCLE (G73, G74, G76, G80 -G89)

F3031-096 CANNED CYCLE A AND B: G73 (CHIP BREAK CYCLE) G74 (reverse tapping cycle), G76 (fine boring cycle), G80 - G89, inclusively drilling, boring, tapping, reaming

F3031-105 CIRCULAR INTERPOLATION BY R PROGRAMMING.

F3031-108 CIRCULAR INTERPOLATION: G02 (CW), G03 (CCW)

F3031-114 CLOCK FUNCTION

F3031-123 CONTROL IN / OUT: COMMENT STATEMENTS WITH NC PROGRAM

F3031-129 COORDINATE SYSTEM ROTATION

F3031-144 CUTTER DIA. COMPENSATION C: (G41 / G42)cutter radius compensation, (cross point method), G40 (OFF), G41 (Left ON), G42 (Right ON)

F3031-150 CUTTING FEED OVERRIDE: G63 (IGNORE FEED RATE override and feed hold), 51 ~ 150% (10 STEPS IN 10% INC.)

F3031-153 CUTTING FEED SPEED: F5 DIGIT 1MM/MIN.

F3031-156 CUTTING FEEDRATE CLAMP

F3031-165 DATA PROTECTION KEY (MEMORY PROTECTION KEY)

F3031-171 DATA SERVER FUNCTION Fast DATA SERVER+Fast Ethernet ATA Flash card type ( Includes a 1GB memory card, 100BASE-TX interface for Ethernet)

F3031-174 DECIMAL POINT PROGRAMMING/POCKET CALCULATORtype decimal point programming

F3031-177 DIRECTORY DISPLAY OF DATA CARD FILES

F3031-180 DISPLAY LOCK

7 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

F3031-183 DNC FUNCTION FROM MEMORY CARD

F3031-186 DOOR INTERLOCK ON/OFF KEY

F3031-189 DRY RUN

F3031-192 DWELL: G04 (0.001 ~ 99999.999 SEC)

F3031-195 DYNAMIC FIXTURE OFFSET (MITSUI SEIKI PROPRIETARY)

F3031-196 DUAL FEEDBACK SYSTEM

F3031-198 EMBEDDED PC

F3031-201 EMERGENCY STOP

F3031-204 EXACT STOP CHECK MODE: G61 (POSITIONING MODE excluding positioning mode excluding --***-- servo lag

F3031-207 EXACT STOP MODE: (G62)

F3031-210 EXACT STOP: (G09) NON-MODAL

F3031-222 EXTENDED PART PROGRAM EDITING

F3031-234 EXTERNAL WORK NUMBER SEARCH

F3031-243 FEED HOLD

F3031-246 FEED OVERRIDE CANCEL: G64 (CONTINUOUS MOTION MODE INCLUDING SERVO LAG)

F3031-249 FEED RATE CLAMP BY CIRCULAR RADIUS

F3031-252 FEED RATE OVERRIDE ON/OFF: M36 (ON), M37 (OFF)

F3031-255 FEED-FORWARD CONTROL

F3031-256 FEED PER REVOLUTION

8 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

F3031-264 FOCUS II / ETHERNET FOCUS II / ETHERNET includes:Ethernet Function Fast Eithernet Function PVB Fast Ethernet / Data ServerFocus II Windows Drivers and LibraryOperator's Manual for Fast Ethernet

F3031-267 FOLLOW-UP: CURRENT POSITION MONITORING AT emergency stop or servo alarm status

F3031-270 GRAPHIC DISPLAY

F3031-273 HANDLE FEED: X, Y, Z, A AND B AXIS, SELECTABLE Resolution switch in X1, X10, X100

F3031-279 HELICAL INTERPOLATION

F3031-285 HELP FUNCTION

F3031-288 HIGH SPEED SKIP

F3031-303 INCH / METRIC CONVERSION

F3031-312 INITIAL POINT / R POINT RETURN IN CANNED CYCLE: G98 (initial point return), G99 (R point return)

F3031-315 INPUT / OUTPUT THROUGH MEMORY CARD

F3031-318 INPUT CODE: EIA RS-244-B/ISO-840 (Automatic recognition)

F3031-330 INTERPOLATION UNIT: 0.0005 MM (0.00002") 0.0005º

F3031-333 INTERRUPTION TYPE CUSTOM MACRO (CUSTOM MACRO REQ'D)

F3031-336 INVERSE TIME FEED

F3031-348 LABEL SKIP

F3031-351 LCD UNIT 2 SET CONNECTION

F3031-354 LEVEL UP HRV CONTROL

9 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

F3031-357 LINEAR ACCELERATION / DECELERATION BEFORE cutting feed interpolation

F3031-360 LINEAR INTERPOLATION: ( G01 )

F3031-363 LINEAR RAPID ACCEL / DECEL BEFORE INTERPOLATION

F3031-366 LOAD METER DISPLAY (OPERATING MONITOR SCREEN)

F3031-369 LOCAL COORDINATE SETTING: ( G52 )

F3031-372 LOOK AHEAD ACCELERATION / DECELERATION

F3031-378 MACHINE LOCK

F3031-393 MANUAL CONTINUOUS FEED (JOG FEED): X, Y, Z, A and B axis Selectable, Rapid, High, Medium, Low

F3031-399 MANUAL FEED SELECT: RAPID/HIGH/MEDIUM/LOW/Handle/ Ref Z (zero return)

F3031-408 MANUAL REFERENCE POSITION RETURN

F3031-411 MAX. COMMAND VALUE: +/- 99999.999 MM, +/- 99999.999º

F3031-414 MDI FUNCTION

F3031-417 MINIMUM INPUT VALUE: 0.001 MM (0.00004"), 0.001º

F3031-420 MIRROR IMAGE: ANY AXIS

F3031-423 MODE SELECT: MANUAL / MDI / TAPE / MEMORY / EDIT

F3031-426 MODEM CARD CONTROL

F3031-429 MULTI AXES SIMULTANEOUS CONTROL

F3031-432 MULTI BUFFER REGISTER (5 BLOCKS)

F3031-441 MULTI-LANGUAGE DISPLAY (JAPANESE OR ENGLISH)

F3031-447 NANO INTERPOLATION

10 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

F3031-456 NUMBER OF REGISTERED PROGRAMS EXPANSION 1 (MAX 1000) 64K=120 PCS, 128K=250 PCS, 256Kk=500 PCS,512K=1000 PCS

F3031-465 OPERATION HISTORY DISPLAY

F3031-468 OPERATION PANEL (10.4 LCD COLOR DISPLAY) with PC type key arrangement

F3031-471 OPTIONAL BLOCK SKIP (9 SETS)

F3031-477 ORIGIN

F3031-480 PART PROGRAM EDITING

F3031-498 PART PROGRAM STORAGE 4MB (10,240 M)

F3031-504 PART PROGRAM VERIFY

F3031-507 PART PROGRAM STORAGE SIZE 160M (64KBYTE)

F3031-510 PARTS COUNT DISPLAY

F3031-513 PLANE SELECTION: G17 (X-Y), G18 (X-Z), G19 (Y-Z)

F3031-525 POSITIONING: ( G00 )

F3031-528 PROGRAM DIRECTORY BY GROUP: SAME GROUP OF programs will be listed on CRT

F3031-531 PROGRAM DIRECTORY: ALL REGISTERED PROGRAM numbers and names will be listed on CRT

F3031-534 PROGRAM EDITING AND EXECUTION THROUGH MEMORY card

F3031-537 PROGRAM NUMBER AND NAME: 2 - 09999 (4 DIGITS) UP TO16 digits letters for program name

F3031-540 PROGRAM NUMBER SEARCH

F3031-543 PROGRAM PROTECT

F3031-546 PROGRAM RESTART

11 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

F3031-549 PROGRAMMABLE DATA INPUT: ( G10 ) (TOOL OFFSETS, work offsets can be changed by program)

F3031-555 PROGRAMMABLE PARAMETER INPUT: (G10 L50)

F3031-561 RAPID TRAVERSE BELL-SHAPED ACCELERATION /DECELERATION

F3031-564 RAPID TRAVERSE OVERRIDE; 0, 2, 15, 50, 100%

F3031-570 READER/PUNCHER INTERFACE (2CH)

F3031-573 REFERENCE POSITION RETURN CHECK: (G29) (RETURN FROM ZERO)

F3031-576 REGISTERABLE PROGRAMS: 63

F3031-600 SCREEN HARD COPY

F3031-603 SECOND REFERENCE POINT RETURN: (G30)

F3031-606 SELF-DIAGNOSIS: SERVO SYSTEM ALARMS, FEEDBACK system alarm, NC alarms, PC alarms, NC status I/O signal, status ladder diagram are shown on CRT

F3031-609 SEQUENCE # COMPARISON & STOP

F3031-612 SEQUENCE NUMBER SEARCH

F3031-615 SEQUENCE NUMBER: N1 - N99999 (5 DIGITS)

F3031-618 SERVO WAVEFORM DISPLAY

F3031-621 SIMULTANEOUS EDITING OF TWO PROGRAMS

F3031-624 SINGLE BLOCK

F3031-627 SINGLE DIRECTION POSITIONING

F3031-633 SKIP FUNCTION: (G31)

F3031-639 SPINDLE CONTROL: ON / OFF, CW/CCW

F3031-642 SPINDLE FUNCTION (S CODE): 5 DIGIT (DIRECT COMMAND)

12 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

F3031-645 SPINDLE SPEED OVERRIDE: 50 - 150% (10 steps in 10% inc.)

F3031-648 STATUS DISPLAY FUNCTION

F3031-654 STORED PITCH ERROR COMPENSATION: UP TO 128 points on each axis, Max +/- 7 pulses x 100

F3031-657 STORED STROKE CHECK 1

F3031-666 SUBPROGRAM: M98, M99 (UP TO 4 LEVELS OF nesting and 10000 times repeat) Up to 9000 subprogram

F3031-669 TANGENTIAL SPEED CONSTANT CONTROL

F3031-672 TAPE FORMAT FOR FS15

F3031-675 TAPPING MODE: G63 (IGNORE FEED RATE OVERRIDE and feed hold)

F3031-682 TOOL FUNCTION (T CODE): 8 DIGITS (TOOL NO)

F3031-687 TOOL LENGTH OFFSET: G43 (+), G44 (-), G49 (OFF)

F3031-720 TOOL OFFSET MEMORY A: 99 SETS (H, D 3 DIGITS) OFFSET VALUE ±999.999

F3031-726 TOOL OFFSET MEMORY C (GEOMETRY / WEAR & LENGTH / WEAR MEMORY)

F3031-744 TOOL OFFSET PAIRS 999-PAIRS

F3031-762 WORK COORDINATE SYSTEM CHANGE: G92

F3031-765 WORK COORDINATE SET: (G54 ~ G59)

F3031-771 Z AXIS COMMAND NEGLECT

13 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

ADDITIONAL SAFETY OPTIONS

SP-3029 French / English Caution Plates

ADDITIONAL PERFORMANCE OPTIONS

X-3002 100 PSI Air thru spindle and tool holder

X-3009 250 Hour Capacity Lubrication System

X-3017 High Intensity, Low Heat Worklamps

X-3019.1 Isolation Transformer 480 / 220 VAC, 3Ph, 60Hz

X-5051 CE-Mark Electrical & Safety package HARDWARE & SOFTWARE & CERTIFICATION

X-9500.4 One complete "Everest" Coolant Flow Monitoring System, with 2 Pressure Switch, and all required mounting hardware, plumbing, and integration for TWO (2) CIRCUITS ONLY for flow monitoring of external flood coolant manifolds, Includes Custom Logic modifications.

X-9500.5 One Pressure Switch for coolant through spindle to monitor mimimum pressure setting is present. Actual pressure measurement not available.Includes logic, wiring and integration.

X-9600 Custom Software & Logic for data collection from Load Monitor & Coolant Flow Monitor systems (similar to what is installed at Curtil SA)

X-9800 Tool ID Reader head (1) (Balluff) installed at Tool Load Station (1) including logic & software on machine, MOA modifications, Integration with FastemsNote: Tool ID Reader location inside ATC door at load station tool pot.

X-9898 Two (2) each LOSMA Darwin 2000M Mist Collectors complete with: • “Guard” model 20A • “Clipper” model 20.13 All Ducting, and interface to machine. Installation at Customer Site.

14 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

X-9899 Hakusan special chip handling system (Rear Discharge) Dual conveyor: hinge pan over scraper with

rotating drum filter for fine swarf filtration. (70 µm)Includes 2500 liter (660 US gal) tank, quick disconnect

piping wiring and 1200 mm exit conveyorDual "ROSEDALE" Bag Filters for Oil Based Coolant, with manual By-Pass valve for easy maintenance

Coolant Pumps:a) M-52 High Pressure Coolant Shower from Ceiling with pump rating: Outlet pressure of pump: 5 bar (70 psi) Outlet volume: 90 L/min. (~23 GPM)b) M-51 High Pressure Through Spindle with pump rating: Outlet pressure of pump: 70 bar (1000 psi) Outlet volume: 70 L/min. (~18 GPM) 5 separate pressure settings by M-code commandc) High Pressure Flood with pump rating: Outlet pressure of pump: 5 bar (70 psi) Outlet volume: 70 L/min. (~18 GPM)

SUB-TOTAL LIST PRICE: ONE (1) HU63A-5X EQUIPMENT CONFIGURATION

SUB-TOTAL NET PRICE: HU63A-5X EQUIPMENT CONFIGURATION 1,254,430.50$

SPECIAL OPTIONS NOT SUBJECT TO DISCOUNT

X-9900 SKF-Vogel Lubri-Lean VARIO MQL system (Minimum Quantity Lubrication) Oil Mist thru spindle system for machining

15 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

SERVICES

WTY EQUIPMENT WARRANTY EXTENSIONS

WTY-01 12 Month Machine Warranty, 24 Month CNC Warranty(Parts & Labor)

WTY-02 24 Month Machine Warranty, 24 Month CNC Warranty (Parts & Labor)

SH-1 Shipping cost from Port of Entry to customer plant Note: Shipping cost is to customer location, alongsidecustomer loading dock. Shipping cost is dependent on customer location, and selected Port of Entry, as well as final equipment configuration.

GRAND TOTAL NET PRICE: 1,278,955.50$ HU63A-5X EQUIPMENT CONFIGURATION & SERVICES

16 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

GENERAL NOTES:

PRICES: Prices are quoted in U.S. Dollars.

DELIVERY: Factory Acceptance time for Serial # 714 is quoted as January 8 2009 based on receipt of customer formal REVISED purchase order by July 21, 2008.

Delivery to Valencia, CA for Serial # 714 is quoted as March 5 2009 based on receipt of customer formal REVISED purchase order by July 21, 2008.

Final Acceptance (at customer site) for Serial # 714 is quoted as April 24 2009 based on receipt of customer formal REVISED purchase order by July 21, 2008.

Factory Acceptance time for Serial # 715 is quoted as January 30 2009 based on receipt of customer formal REVISED purchase order by July 21, 2008.

Delivery to Valencia, CA for Serial # 715 is quoted as March 30 2009 based on receipt of customer formal REVISED purchase order by July 21, 2008.

Final Acceptance (at customer site) for Serial # 715 is quoted as June 3 2009 based on receipt of customer formal REVISED purchase order by July 21, 2008.

INCOTERMS: DDP: Curtil North America LLC, Valencia, CA, DUTY PAIDNOTE 1: No element of local state taxes are included.NOTE 2: Local transport for Port of Long Beach, CA has been quoted

as a line item in this quotation.

PAYMENT TERMS: 40% Payment due August 29, 2009 latest.60% Payment due October 30, 2009 latest.NOTE: Final acceptance conditions to be agreed upon prior to order placement.

WARRANTY: Mitsui Seiki NEW MACHINE WARRANTY will apply.Mitsui Seiki 5-YEAR ACCURACY GUARANTEE will apply.Mitsui Seiki 95% UPTIME GUARANTEE will apply.

TRAINING: Complete, machine specific, Operation, Programming, and Maintenance training is included. This is a comprehensive trainingprogram. Detailed discussion is required to be certain that all training is suitable for customer personnel. Application training is alsoavailable to further enhance customer capability to realize maximummachine performance. Duration of training will be determined afterdiscussion with our customer. Our intention is to be certain our customers are very comfortable with their new investment.

17 MITSUI SEIKI

QUOTATION #M1945-07: HU63A-5X / F30i

SERVICE: Mitsui Seiki will provide qualified after installation service to customer with the following response time commitment:*Telephone service response within 3 hours of receipt of

request for service during normal working hours (8:30 AM ~5:30 PM Eastern or Pacific Time)

*Qualified Mitsui Seiki Service Engineer will be enroute to customer site within 24 hours of Mitsui Seiki & Customer mutual determination that On Site Service is required (following telephone service call)

*Any parts required wil be shipped by fastest route possible after determinationof actual parts needed (usually via overnight courier)(Mitsui Seiki maintains an extensive parts inventory in North America)

18 MITSUI SEIKI

3955

LS1

3271

183203000

450

6500 8500

App

rox.

111

00

5 Modules6 Pallet Places In Module30 Pallets Places In SystemMax Load 1100 kgMax Load Dimensions 900*1250*900 mm (X*Y*Z)Max Swing Diameter 1000 mm

TB: M

C1

TB: M

C2

Power Supply400VAC3x63A

Compressed Air6 bar

Machine: Mitsui Seiki HU63A-5x _180

SURFACESNOT STATED

CHECKED

/SHEETDRAWING NO.

DESIGNED

DESCRIPTION

MODEL

BELONGS TO

WEIGHT

SCALE

CF

A3

REV

Fastems1:100

1 2

MATERIAL

F520216_02_FPM_v20

REVISION REVISION DESCRIPTION DESIGNED CHECKED

TOLERANCES-YLEISTOLERANSSITMACHINED DIN 7168 MIDDLEWELDED SFS-EN ISO 13920-BWELD QUALITY LEVEL/HITSAUSLUOKKA EN 25817 C

FPM1100L2 F520216_02_FPM_v20

13.6.2008 ali-kippari_janne

3271

3955

18320

5 Modules6 Pallet Places In Module30 Pallets Places In SystemMax Load 1100 kgMax Load Dimensions 900*1250*900 mm (X*Y*Z)Max Swing Diameter 1000 mm

SURFACESNOT STATED

CHECKED

/SHEETDRAWING NO.

DESIGNED

DESCRIPTION

MODEL

BELONGS TO

WEIGHT

SCALE

CF

A3

REV

Fastems2007-02-06

2007-02-06

HALKOLA 1:80

HALKOLA T2 2

MATERIAL

F520216_02_FPM_v20

REVISION REVISION DESCRIPTION DESIGNED CHECKED

TOLERANCES-YLEISTOLERANSSITMACHINED DIN 7168 MIDDLEWELDED SFS-EN ISO 13920-BWELD QUALITY LEVEL/HITSAUSLUOKKA EN 25817 C

FPM1100L2 F520216_02_FPM_v20