THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

DO NOTSCALE FROM

THIS PRINT

ERM5-XXX-XX.X-X-DV-XX-X-XRNo OF POSITIONS

(PER ROW) -005, -010, -020, -030, -040, -050,-060, -070, -075

LEAD STYLE-02.0 = 2MM-04.0 = 4MM-05.0 = 5MM

PLATING SPECIFICATION(VALUES GIVEN ARE IN MICRO-INCHES)-L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -S: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL

ROW SPECIFICATION-DV: DOUBLE VERTICAL

OPTIONS -FL: FRICTION LOCK (NOT AVAILABLE WITH -WT, ONLY AVAILABLE UP TO 30 POSITIONS) (FOR MATING WITH ERF5-XXX-XX.X-X-DV-FL)-WT: WELD TAB (NOT AVAILABLE WITH -FL) (FOR MATING WITH ERF5-XXX-XX.X-X-DV-WT) -L: LATCH (NOT AVAILABLE WITH -FL OR -WT OPTIONS) (ONLY AVAILABLE WITH -020, -030, & -040 POSITIONS AND 02.0 & 05.0 LEAD STYLES)

TAPE & REEL (SEE NOTES 4, 5 &6)-TR: TAPE & REEL-FR: FULL REEL QTY TAPE & REEL

PICK & PLACE OPTION-K: POLYIMIDE FILM PAD (SEE NOTE 6) (NOT AVAILABLE FOR -005 POSITION)-P: PICK AND PLACE PAD (PPP-08 ONLY AVAILABLE FOR -020 THRU -075 POSITIONS) (PPP-89 ONLY AVAILABLE FOR -005 AND -010 POSITIONS)

"C" REF

1.32 .052REF

"A"

"A"

ERM5-XXX-XX.X-DV(SEE TABLE 2)

"A" REF

4.95 .195REF

0.50 .020 (TYP)(TOL NON-ACCUM) "B"

01

02

59

60C

C

CL

CL

"D"REF

1.00 REF.039

"B" 0.50 (TYP).020

(TOL NON-ACCUM) 'B'CL

CL

CC

2.55+-0.070.10 .100+

-.003.004

3.80±0.20 .149±.008

"E" REF (SEE TABLE 6, SHT 3)

"F"(SEE TABLE 6, SHT 3)

"S" REF(SEE TABLE 6, SHT 3)

SECTION "A"-"A"SCALE 8 : 1

C

T-1M59-XX.X-X(SEE TABLE 2)

C

CLC

C

SEE TABLE 4

1.32 REF.052

1.10 .043REF

DETAIL 'B'SCALE 4 : 1

C

FIG 1ERM5-030-02.0-X-DV-XX-XR SHOWN

DESIGNED AND DIMENSIONEDIN MILLIMETERS [INCHES]

SHEET OF

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN MILLIMETERS [INCHES].TOLERANCES ARE:DECIMALS ANGLESX.X: 0.3 [.01] 2X.XX: 0.13 [.005]X.XXX: 0.050 [.0020]MATERIAL:

.5MM EDGE RATE TERMINAL ASSEMBLY

BY:ERM5-XXX-XX.X-X-DV-XX-X-XR

DWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

DAVID W 4/30/2008 41

SHEET SCALE: 3:1

INSULATOR: LCP, COLOR: BLACKTERMINAL: BeCu OR PHOS BRONZE

F:\DWG\MISC\MKTG\ERM5-XXX-XX.X-X-DV-XX-X-XR-MKT.SLDDRW

NOTES:1. REPRESENTS A CRITICAL DIMENSION.2. MAXIMUM BURR ALLOWANCE: 0.038[.0015]3. MINIMUM PUSHOUT FORCE: 1.6 N [.36 LB.] MINIMUM WELD TAB PUSHOUT FORCE, -04.0 & -05.0 LEAD STYLES: 2.25 N [.51 LB]. -02.0 LEAD STYLE: 1.45 N [.33 LB].4. ORDERS WILL BE PACKAGED ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM.5. ATTACH LABEL TO EACH REEL.6. LEAD STYLE -02.0 WITH -K-TR OPTIONS AVAILABLE TO EXISTING CUSTOMERS ONLY.

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

REVISION AG

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

3° MAX SWAY

IN PROCESS 1CUT T-1M59-XX.X-X TERMINAL COMBS

(ALL TAILS SAME DIRECTION)

C

0.33 .013(TYP)

"T"

C

"J" REFCL

0.30 .012REF

"Q" REF(SEE TABLE 7)

"K"

ERM5-XXX-XX.X-DV-FL(SEE TABLE 8)

(SEE TABLE 6, SHT 3)"M"

0.50 REF.020

0.50 .020WT-36-XX-T(SEE TABLE 8)

C

FIG 4(ERM5-030-02.0-X-DV-WT-XR SHOWN)

(SAME AS FIG 3)(NOT AVAILABLE WITH -FL)

ERM5-XXX-XX.X-DV-FL(SEE TABLE 8)

"L"

FIG 3(ERM5-030-02.0-X-DV-FL-XR SHOWN)(SAME AS FIG 1 EXCEPT AS SHOWN)

(NOT AVAILABLE WITH -WT, ONLY AVAILABLE UP TO 30 POSITIONS)

SHEET OF

.5MM EDGE RATE TERMINAL ASSEMBLY

BY:ERM5-XXX-XX.X-X-DV-XX-X-XR

DWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

DAVID W 4/30/2008 42

SHEET SCALE: 3:1

REVISION AG

F:\DWG\MISC\MKTG\ERM5-XXX-XX.X-X-DV-XX-X-XR-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

0.70±0.50 .028±.020

6.35 .250 REF

"N"

C7.62 .300 REF

"P" 0.50[.020]C

FIG 5-P OPTION

(PPP-08 ONLY AVAILABLE FOR -020 THRU -075 POSITIONS)(ERM5-030-02.0-X-DV-P-XR SHOWN)

PPP-083.50 REF.138

"H" 0.50[.020]C

FIG 2-K OPTION

(USE K-DOT-.138-.250-.005)(ERM5-030-02.0-X-DV-K SHOWN)

0.73±0.50 .029±.020

"G"

C

3.50 .138 REF

"R"±0.50[.020]

PPP-89FIG 6

-P OPTION(PPP-89 ONLY AVAILABLE FOR -005 AND -010 POSITIONS)

(ERM5-010-02.0-X-DV-P-XR SHOWN)(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 5)

C

SHEET OF

.5MM EDGE RATE TERMINAL ASSEMBLY

BY:

ERM5-XXX-XX.X-X-DV-XX-X-XRDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

DAVID W 4/30/2008 43

SHEET SCALE: 3:1

REVISION AG

F:\DWG\MISC\MKTG\ERM5-XXX-XX.X-X-DV-XX-X-XR-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

"V" REF

"W"±0.10[.004] 0.50 .020 REF

"C"

"C"WT-124-XX-T

ERM5-XXX-XX.X-DV-L

"U" REF

"X" REF 1.30 .051 REF

0.64 .025 REF

1.42 .056

1.84 .072 REF

SECTION "C"-"C"

FIG 7(ERM5-030-02.0-X-DV-L-XR SHOWN)(SAME AS FIG 1 EXCEPT AS SHOWN)

SHEET OF

.5MM EDGE RATE TERMINAL ASSEMBLY

BY:

ERM5-XXX-XX.X-X-DV-XX-X-XRDWG. NO.

DESCRIPTION:

DAVID W 4/30/2008 44F:\DWG\MISC\MKTG\ERM5-XXX-XX.X-X-DV-XX-X-XR-MKT.SLDDRW

REVISION AG

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

SHEET SCALE: 3:1

DO NOT SCALE DRAWING