THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

DESIGNED & DIMENSIONEDIN MILLIMETERS[INCHES]

DO NOTSCALE FROM

THIS PRINT

OPTIONS

SOLDER COMPOSITION & STYLEROW

-04: 4 ROWS -06: 6 ROWS -08: 8 ROWS (SEE NOTE 11) -10: 10 ROWS (SEE NOTE 11)

-S: .000030" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -L: .000010" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -STL: .000030" SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD ON TAIL (SEE NOTE 19)(ONLY PAIRED WITH -1 SOLDER COMPOSITION & STYLE

PLATING SPECIFICATION

PICK & PLACE OPTION*-K: POLYAMIDE FILM(KAPTON STANDARD WITH OR WITHOUT -K)(SEE SHT 4, FIG. 3)(SEE NOTE 14)

-10, -20, -30, -40, -50 (PER ROW)

No OF POSITIONS

SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XX

-1: 63.0% TIN / 37.0% LEAD CHARGE TAIL (USE SUB-T-1M132-XX.X-STL-1) (ONLY AVAILABLE WITH -STL PALTING)*-2: 95.5% TIN / 3.8% SILVER/ 0.7% COPPER CHARGE TAIL (USE SUB-T-1M71-XX.X-X-X) -3: 95.5% TIN / 3.8% SILVER / 0.7% COPPER CHARGE TAIL (USE SUB-T-1M132-XX.X-X-2)

-GP= GUIDE POST (SEE SHT 3, FIG 2) (ONLY AVAIL. ON -S02.0 LEADSTYLE) (RELEASED ON THE -04, -08 & -10 ROWS) (NOT TOOLED ON -06 ROW) (FOR MATING WITH SEAF8-...-RA-GP ONLY)

C

-S02.0= 2.0mm-S05.0= 5.0mm

LEAD STYLE

-BLANK: TAPE & REEL(SEE NOTE 4 &17)-FR: FULL REEL QTY TAPE & REEL(SEE NOTES 16,17 & 18)

PACKAGING

"A" REF

"B" REF

4.00 .157REF (TYP)

2.00 .079REF (TYP)

"H"REF

"G"REF

0.75 .030(4 PLCS) REF 1.95 (4 PLCS) REF.077

2.90 (4 PLCS) REF.114

"E" EQ. SPCS @ 0.800[.0315]= "F"

0.800 (TYP).0315 "A"

"A""C"

"E"

"E"

PIN A1

PIN H1

CL

C

C

PIN A30

PIN H30

0.100[.0039]

0.800 .0315(TYP) "C" (TYP)

1.02 REF.040

"M" REF

0.70 .028REF

1.00 .039(4 PLCS) REF

0.70 .028 REF

1.27 .050 REF

"D" REF

'B'

'F'

SEAM8-XX-SXX.X-XX-X

C

"L" REFC

1.32 .052REF

1.10 REF.043

1.32 REF.052

"J" REF CL

FIG 1(SEAM8-30-S02.0-XXX-08-X-XX-K SHOWN)

(SOME CENTER FEATURES REMOVED FOR CLARITY)C

C

*= FOR EXISTING CUSTOMERS ONLY

SHEET OF

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN MILLIMETERS[INCHES].

TOLERANCES ARE:

DECIMALS ANGLESX.X: 0.3 [.01] 2 X.XX: 0.13 [.005]X.XXX: 0.051 [.0020]MATERIAL:

0.8MM PITCH TERMINAL ARRAY ASSY

BY:

SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KNOWLDEN 12/29/08 51

SHEET SCALE: 2:1INSULATOR: LCP, COLOR: BLACKTERMINAL: COPPER ALLOYGUIDE POST: BRASS

C:\EnterpriseVault\DWG\MISC\MKTG\SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XX-MKT.slddrw

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

NOTES:

1. REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: -2 SOLDER COMPOSITION = 1.6N [0.36LBS] & -1/-3 SOLDER COMPOSITION = 1.2N [0.27LBS]. 3. DIMENSION TO BE MEASURED IN ALL FOUR CORNERS TO THE STAND-OFFS. 4. TAPE & REEL IS STANDARD PACKAGING. 5. NOTE DELETED. 6. NOTE DELETED. 7. ATTACH LABEL "SEAX-0001" TO EACH TAPE & REEL PACKAGE. 8. MAXIMUM ROW TO ROW VARIATION 0.08 [.003], MEASURED FIRST AND LAST POSITIONS ONLY, ALL ROWS. 9. MINIMUM GUIDE POST PUSH OUT FORCE: 4.0LBS [17.8N] 10. CENTER MACHINE LUGS ON -S02.0 -40, -50 POSITIONS ONLY. 11. -08 & -10 ROWS ARE RELEASED FOR NITROGEN ENVIRONMENT PROCESSING ONLY. NOT RECOMMENDED FOR AIR ONLY PROCESSING. 12. NOTE DELETED. 13. NOTE DELETED. 14. K DOT WILL BE SUPPLIED WHETHER OR NOT -K IS SPECIFIED. 15. MEASURE DIMENSION OFF PEAK OF SOLDER CHARGE END. 16. -STL PLATING AND -GP OPTION ARE NOT STANDARD WITH -FR PACKAGING. 17. ORDERS WILL BE PACKAGED ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM. 18. ATTACH LABEL TO EACH REEL. 19. PART CONFIGURATIONS WITH -STL PLATING AND -GP OPTION NEED TO BE SETUP AS AN ASP DUE TO CHARACTER LIMITATIONS.

REVISION AJ

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

0.54 REF.021

1.33+-0.150.08 .052+

-.006.003 (TYP)

"V" REF(SEE TABLE 2)

0.23 .009 REF

0.94+-0.050.16 .037+

-.002.006 (TYP)

C

C

C

SOLDER CHARGE

SUB-T-1M71-XX.X-X-X

SECTION "A"-"A"SCALE 8:1

(VIEW ROTATED 90 CW)

-2 SOLDER COMPOSITION & STYLESEAM8 BUILT WITH SUB-T-1M71-XX.X-X-X

(SEE TABLE 2)

0.13±0.08 .005±.003(SEE NOTES 3 & 15)

0.05 .002 REF (TYP)

DETAIL 'B'SCALE 8 : 1

C

C

0.15 [.006]

1.33+-0.150.08 .052+

-.006.003 (TYP)

"V" REF(SEE TABLE 2)

0.54 .021 REF

0.23 .009 REF

0.94+-0.050.16 .037+

-.002.006 (TYP)

SECTION "E"-"E"SCALE 8:1

(VIEW ROTATED 90 cw)

SUB-T-1M132-XX.X-XXX-X

SOLDER CHARGE

C

C

C

-1 & -3 SOLDER COMPOSITION AND STYLESEAM8 BUILT WITH SUB-T-1M132-XX.X-XXX-X

(SEE TABLE 2)

0.13±0.08 .005±.003(SEE NOTES 3 & 15)

0.05 .002 REF (TYP)

DETAIL 'F'SCALE 8 : 1

C

C

0.15 [.006]

SHEET OF

0.8MM PITCH TERMINAL ARRAY ASSY

BY:

SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KNOWLDEN 12/29/08 52

SHEET SCALE: 2:1

REVISION AJ

C:\EnterpriseVault\DWG\MISC\MKTG\SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XX-MKT.slddrw

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

"A" REF.(SEE SHEET 1, TABLE 3)

"G" REF(SEE SHEET 1, TABLE 4)

"T"REF

"U" REF

SEAM8-XX-S02.0-XX-GP

FIG 2-GP (GUIDE POST OPTION)

(SEAM8-XX-S02.0-XXX-XX-XXX-GP-K SHOWN)(SOME CENTER FEATURES REMOVED FOR CLARITY)

10.00 .394 REF

1.27 .050 REF

1.78 .070 REF (TYP)

1.8°MAX SWAY

(EITHER DIRECTION)

WT-86-01-T(SEE NOTE 9)

"S"

6.40 .252 REF (TYP)

1.50±0.13 .059±.005 (TYP)

"S"

C

C

C

0.10 MAX.004(MEASURE FROM BEAM EDGES)

'D'

DETAIL "C" SCALE 35 : 1

C DETAIL 'D' SCALE 100 : 1

MEASUREMENTS TAKEN FROM BEAM EDGE

SHEET OF

0.8MM PITCH TERMINAL ARRAY ASSY

BY:

SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KNOWLDEN 12/29/08 53

SHEET SCALE: 2:1

REVISION AJ

C:\EnterpriseVault\DWG\MISC\MKTG\SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XX-MKT.slddrw

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

"A" REF(SEE SHEET 1, TABLE 3)

"G"REF

(SEE SHEET 1, TABLE 4)

"P" "N" 0.51[.020]

'E'

FIG 3-K POLYIMIDE PAD

(SEAM8-XX-S02.0-XXX-XX-X-K SHOWN)(SOME CENTER FEATURES REMOVED FOR CLARITY)

C

C

0.13 PAD REF.005

"R"(TOP OF PADTO BOTTOMOF STANDOFF)

"A" REF(SEE SHEET 1, TABLE 3)

1.50 .059 REF

2.50 .098 REF

SEE NOTE 10

SEE NOTE 10

"S" 0.51 [.020]

DETAIL 'E' SCALE 12 : 1

FIG 4(SEAM8-50-S02.0-XXX-10-X-XX-K SHOWN)

(SOME CENTER FEATURES REMOVED FOR CLARITY)

= FOR 10 POSITION ONLY, "P" = 8.25 [0.325], "S" = 1.025 [0.040]

= FOR 10 POSITION ONLY USE K-DOT-.325-.450-.005

SHEET OF

0.8MM PITCH TERMINAL ARRAY ASSY

BY:

SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KNOWLDEN 12/29/08 54

SHEET SCALE: 2:1

REVISION AJ

C:\EnterpriseVault\DWG\MISC\MKTG\SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XX-MKT.slddrw

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

"A" REF(SEE SHEET 1, TABLE 3)

"G" REF(SEE TBL 4, SHT 1)

"L" REF(SEE TBL 5, SHT 1)

"A" REF(SEE SHEET 1, TABLE 3)

"G" REF(SEE TBL 4, SHT 1)

"L"(SEE TBL 5, SHT 1)

REF

FIG 5(SEAM8-30-S05.0-XXX-04-X-XX-K SHOWN)

(SOME CENTER FEATURES REMOVED FOR CLARITY)

FIG 6(SEAM8-30-S02.0-XXX-06-X-XX-K SHOWN)

(SOME CENTER FEATURES REMOVED FOR CLARITY)

SHEET OF

0.8MM PITCH TERMINAL ARRAY ASSY

BY:

SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KNOWLDEN 12/29/08 55

SHEET SCALE: 2:1

REVISION AJ

C:\EnterpriseVault\DWG\MISC\MKTG\SEAM8-XX-SXX.X-XXX-XX-X-XX-X-XX-MKT.slddrw

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322