REVISION HISTORY

REV DESCRIPTION DATE APPROVED

TITLE

SIZE CustomerDWG NO

REV

SCALE SHEET

Finish #4 B

Estate Elite BI with Insulated Jacket Clearances

- Engineering Release 03/20/2018 Todd Stone

37 Adams Blvd., Brantford, Ontario, N3S 7V8P: (519) 751-1800 www.crownverity.com

1:10 1 of 3

--Crown Verity

K Factor

Weight (Kg)

Gauge

N/A

N/A

N/A

DRAWN BY: Todd StoneMaterial SS 304 03/20/2018

Dimensions are in inchesLinear Tolerance: +/- .015Bend Tolerance: +/- .020Angular Tolerance: +/- 0.5Radial Tolerance: +/-.005

Copyright 2018 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.

39.421EE36 Shown

For EE24 Dimension is 27.421For EE30 Dimension is 33.421For EE48 Dimension is 52.821

13.827

19.391

24.165

Dimensions shown are actual dimensions. Please refer to theinstallation manual for additional clearances and clearances

to combustibles

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

TITLE

SIZE CustomerDWG NO

REV

SCALE SHEET

Finish #4 B

Estate Elite BI with Insulated Jacket Clearances

- Engineering Release 03/20/2018 Todd Stone

37 Adams Blvd., Brantford, Ontario, N3S 7V8P: (519) 751-1800 www.crownverity.com

1:10 2 of 3

--Crown Verity

K Factor

Weight (Kg)

Gauge

N/A

N/A

N/A

DRAWN BY: Todd StoneMaterial SS 304 03/20/2018

Dimensions are in inchesLinear Tolerance: +/- .015Bend Tolerance: +/- .020Angular Tolerance: +/- 0.5Radial Tolerance: +/-.005

Copyright 2018 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.

25.052

.449

Dimensions shown are actual dimensions. Please refer to theinstallation manual for additional clearances and clearances

to combustibles

REVISION HISTORY

REV DESCRIPTION DATE APPROVED

TITLE

SIZE CustomerDWG NO

REV

SCALE SHEET

Finish #4 B

Estate Elite BI with Insulated Jacket Clearances

- Engineering Release 03/20/2018 Todd Stone

37 Adams Blvd., Brantford, Ontario, N3S 7V8P: (519) 751-1800 www.crownverity.com

1:5 3 of 3

--Crown Verity

K Factor

Weight (Kg)

Gauge

N/A

N/A

N/A

DRAWN BY: Todd StoneMaterial SS 304 03/20/2018

Dimensions are in inchesLinear Tolerance: +/- .015Bend Tolerance: +/- .020Angular Tolerance: +/- 0.5Radial Tolerance: +/-.005

Copyright 2018 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.

This dimension is the furthest point the dome protrudes back as it opens. It is 1.666 inches further back than the rear flange of the cabinetshell. Please refer to the installation manual

for clearances to combustibles when installing the grill assembly.

Up 9

0.0

00°

R:0

.015

38.737EE36 Shown

For EE24 Dimension is 26.737For EE30 Dimension is 32.737For EE48 Dimension is 52.137

6.944REF

2.241

2.240

3.166

1.666

6.944

12.937

.461

23.752

1.871+/- .250 Inches

The dimensions shown are the actual physical dimensions of the grill. Additional clearances to cabinetry are dependent on the tolerances of the cut-out. We recommend an additional .125 inches per side but the opening can be made smaller if the tolerances are controlled.

Please refer to the installation manual for additional clearances to combustibles.

If the EE48 is installed with dual 20 or 30 lbs tanks, a second manifold will be

installed on the LH side of the grill. A second manifold is not

required for bulk LP or NG installations.