ISkoreascience.or.kr/article/JAKO200841557526284.pdf · (Revision of ISO 4073:1980) TC107 ISO/DIS 17334 Metallic and other inorganic coatings- Autocatalytic nickel over autocatalytic

J5。시국제규격의 제

다음은 국제표준화기구（IS。）와 국제전기기술위원회（IEC）가 제정작업을 진행하고 있는 국제규격（안）

의 목록이다.

가. ISO 국제규격（안）

TC/SC 규격 번호 규격명 칭

TC8 ISO/미 S 9943 Shipbuilding- Ventilation and air-treatment of galleys and pantries with cooking

appliances (Revision of ISO 9943:1991)

ISO/DIS 28520 Ships and marine technology- Lubricating oil systems- Guidance for grades of

cleanliness and fhjshing

ISO/DIS 28521 Ships and marine technology- Hydra니ic oil systems- Guidance for grades of

cleanliness and fkishing

ISO/DIS 28522 Ships and marine technology- Hydra니ic oil systems- Guidance for assembly

and fhjshing

ISO/DIS 28523 Ships and marine technology- Lubricating and hydraulic oil systems- Guidance

for sampling to determine cleanliness and particle contamination

TC10 ISO/DIS 15519-1 Specification for diagrams for process industry- Part 1: General rules

ISO/DIS 27688-1 G이 ink ball pens and refills- Part 1: General use

ISO/DIS 27688-2 G이 ink ball pens and refills- Part 2: Documentary use (DOC)

TC12 ISO/DIS 80000-12 Quantities and units- Part 12: Solid state physics (Revision of ISO 31-13:1992,

ISO 31-13:1992/Amd 1:1998)

TC17 ISO/DIS 15510 Stainless steels- 아lemical composition(Revision oflSO/TS 15510:2003)

TC20 ISO/DIS 15862 Space systems- Spacecraft-t이aunch-vehicle flight environments telemetry

data processing

TC22 ISO/DIS 4129 Mopeds- Symbols for controls, indicators and tell-tales

(Revision of ISO4129:1990)

ISO/DIS 8709 Mopeds- Brakes and brake systems- Test and measurement methods

(Revision of ISO 8709:1995, ISO 8709:1995/Cor 1:1998)

ISO/DIS 8710 Motorcycles- Brakes and brake systems- Test and measurement methods

(Revision of ISO 8710:1995)

ISO/DIS 15008 Road vehicles- Ergonomic aspects of transport information and control

systems- Specifications and compliance procedures for inwehi이e visu시

presentation (Revision of IS015008:2003)

TC23 ISO/DIS 730.2 Agricultural wheeled tractors- Rear-mounted three-point linkage- Categories

1N, 1, 2N, 2, 3N, 3, 4N and 4 (Revision of ISO 730-1:1994, ISO 730-2:1979,

ISO 730-1:1994/Cor 1:1995)

ISO/DIS 2332.2 Agricultural tractors and machinery- Connection of implements via three-point

linkage- Clearance zone aro니nd implement


ISO/DIS 4254-11 Agricultural machinery- Safety- Part 11: Pick-up tilers

ISO/디 S4254・12 Agricultural machinery- Safety- Part 12: Rotary mowers and flail-mowers

ISO/IEC 국제규격의 제 • 개정 동향 _93


ISO/DIS 11001-3.2 Agricultural wheeled tractors and implements- Three-point hitch couplers- Part

3: Link coupler (Revision of IS011001 -3:1993)

ISO/DIS 25358 Crop protection equipment- Droplet-size spectra from atomizers-

Measurement and dassification

TC28 ISO/DIS 3987 Petroleum products- Determination of sulfated ash in hjbricating oils and

additives (Revision of ISO 3987:1994)

TC29 ISO/DIS 3317 Assembly tools for screws and n니ts- Sq니are drive adaptor with hexagon or

cylindrical flat drive, for power socket wrenches (Revision of ISO 3317:1974)

ISO/DIS 3318 Assembly to이s for screws and nuts- Double-headed open-ended wrenches,

double-headed box wrenches and combination wrenches- Maximum widths of

heads(Revision of ISO 3318:1990)

ISO/DIS 4229 Assembly tools for screws and nuts- Single-headed engineer°0s wrenches for

lower torque applications- Maximum outside dimension of heads and test

torches (Revision of ISO 4229:1977)

TC34 ISO/DIS 6465 Whole cumin (Cuminum cyminum L.)- Specification


ISO/DIS 29822 Animal and vegetable fats and oils- Isomeric diacylglycer에s- Determination of

relative amounts

TC39 ISO/DIS 26303-1 Machine tools- Reliability, availability and capability- Part 1: Capability

evaluation of machining processes on metal-cutting machine tools

TC42 ISO/DIS 10505 Photography- Root mean sq니are (RMS) gran니arity of photographic films-

Method of measurements

TC45 IS01431-1:2004/ Rubber, vulcanized or thermoplastic- Resistance to ozone cracking- Part 1:

DAmdl Static and dynamic strain testing- Amendment 1

ISO/DIS 1436 Rubber hoses and hose assemblies- Wire-braid-reinforced hydraulic types for

oil-based or water-based fluids- Specification (Revision of ISO 1436-1:2001,

ISO 1436-2:2005)

ISO/DIS 2322 Styrene-butadiene rubber (SBR)- Em내sion- and solution-polymerized types-

Ev기니ation procedures (Revision of ISO 2322:1996)

ISO/DIS 2476 Rubber, butadiene (BR)- Solution-polymerized types- Ev기uation procedures


ISO/DIS 3862 Rubber hoses and hose assemblies- Rubber-covered spiral-wire-reinforced

hydra니ic types for oil-based or water-based fluids- Specification (Revision of

ISO 3862-1:2001, ISO 3862-2:2005)

ISO/DIS 4023 Rubber hoses and hose assemblies for steam- Test methods


ISO/DIS 4079 Rubber hoses and hose assemblies- Textile-reinforced hydra니ic types for oil

based or water-based fluids- Specification (Revision of ISO 4079-1:2001, ISO

4079-2:2005)

TC46 ISO/DIS 10957 Information and documentation- International standard music number (ISMN)

94 기술표준

J5。시국제규격의 제 • 개정 동향


ISO/IDS 16245

ISO/DIS23081-2

(Revision of IS010957:1993)

Information and documentation- Boxes, file covers and other enclosures,

made from cellulosic materials, for storage of paper and parchment

documents

Information and documentation- Records management processes for

Metadata- Part 2: Conceptual and implementation issues (Revision of ISO/TS

23081-2:2007)

TC47 ISO/DIS11014 Safety data sheet for chemical prod니cts- Content and order of sections

(Revision of ISO 11014-1:1994)

TC59 ISO/디 S15928-3 Houses- Description of performance- Part 3: Structural durability

TC61 ISO/미 S 8986-1

ISO/DIS 8986-2

Plastics- Polybutene-1 (PB-1) moulding and extrusion materials- Part 1:

Designation system and basis for specification (Revision of ISO 8986-1:1993)

Plastics- Polybutene-1 (PB-1) moulding and extrusion materials- Part 2:

Preparation of test specimens and determination of properties (Revision of ISO

8986-2:1995, ISO 8986-2:1995/Amd 1:2000)

TC67 IS0 15544:2000/

DAmdl

ISO/DIS 15590-1

Petroleum and natural gas industries- Offshore production installations-

Requirements and guidelines for emergency response- Amendment 1

Petroleum and natural gas industries- Induction bends, fittings and flanges for

pip이ine transportation systems- Part 1: Induction bends (Revision of ISO

15590-1:2001)

TC69 ISO/DIS 2859-2 Sampling proced니res for inspection by attrib니tes- Part 2: Sampling plans

indexed by limited q니ality (LQ) for isolated lot inspection (Revision of ISO

2859-2:2985)

TC85 ISO/DIS 26802 Nu에ear facilities- Criteria for the design and the 叩eration of containment and

ventilation systems for nuclear reactors

TC89 ISO/DIS 16893-2

ISO/DIS 16894

ISO/DIS 27769-2

Wood-based panels- Particleboard- Part 2: Requirements

Wood-based panels- Oriented strand boards- Definitions, classification and

specifications

Wood-based panels- Wet process fibreboard- Part 2: Specification

TC96 ISO/미 S 4309 Cranes- Wire ropes- Code of practice for care and maintenance, inspection

and discard (Revision of ISO 4309:2004)

TC102 ISO/IDS 3082 Iron ores- Sampling and sample preparation procedures


TC106 ISO/IDS 4073 Dentistry- Information system on the location of dent기 equipment in the

working area of the oral health care provider


TC107 ISO/DIS 17334 Metallic and other inorganic coatings- Autocatalytic nickel over autocatalytic

copper for electromagnetic shielding

TC108 IS0 13091-1:2001

/DAmd 1

Mechanical vibration- Vibrotactile perception thresholds for the assessment of

nerve dysfunction- Part 1: Methods of measurement at the fingertips-

ISO/IEC 국제규격의 제 • 개정 동향 —95


Amendment 1

TC114 IS0/DIS1112 Horology- Function 기 and non-functional jew 이 s


TC123 ISO/DIS 4378-1 Plain bearings- Terms, definitions, dassification and symbols- Part 1: Design,

bearing materials and their properties (Revision of ISO 4378-1:1997)

ISO/DIS 4378-2 Plain bearings- Terms, definitions, classification and symb이s- Part 2: Friction

and wear (Revision of ISO 4378-2:1983)

ISO/DIS 4378-3 Plain bearings- Terms, definitions, classification and symbols- Part 3:

Lubrication (Revision of ISO 4378-3:1983)

ISO/DIS 43784 Plain bearings- Terms, definitions, dassification and symb이s- Part 4: Basic

symbols (Revision of ISO 4378-4:1997, ISO 7904-1:1995)

ISO/DIS 4378-5 Plain bearings- Terms, definitions, 이assification and symbols- Part 5:

Application of symbols (Revision of ISO 4378-4:1997, ISO 7904-2:1995)

TC131 ISO/DIS 6194-3 Rotary-shaft lip-type seals incorporating elastomeric sealing elements- Part 3:

Storage, handling and installation (Revision of ISO 6194-3:1988)

ISO/DIS 6358-2 Pneumatic fluid power- Determination of flow-rate characteristics of

components using compressible fluids- Part 2: General rules (Revision of ISO

6358:1989)


components using compressible fluids- Part 3: Discharge test as an 기ternate

test method(Revision of ISO 6358:1989)


components 니sing compressible fluids- Part 4: Charge test as an 기temate test

method(Revision of ISO 6358:1989)

TC138 ISO/DIS 17484-2 Plastics piping systems- M니tilayer pipe systems for indoor gas- Part 2: Code

of practice

TC145 ISO/DIS 80416-1.2 Basic principles for graphical symb이s for use on equipment- Part 1: Creation

of graphical symbols for registration (Revision of ISO 80416-1:2001)

TC146 ISO/DIS 15767 Workplace atmosphere- Controlling and characterizing errors in weighing

collected aerosols (Revision of ISO 15767:2003)

ISO/DIS 17735 Workplace atmosphere- Determination of total isocyanate groups in air using

1 -(9-anthracenylmethyl) piperazine (MAP) reagent and liquid chromatography

ISO/DIS 24095 Workplace air- Guidance for the measurement of respirable crystalline silica

TC147 ISO/DIS 13530.2 Water q니ality- Guidance on analytical quality control for chemical and

physicochemic기 water analysis (Revision of ISO/TR 13530:1997)

TC184 ISO/미 S10303-235 Industrial automation systems and integration- Product data representation

and exchange- Part 235: Application protocol: Engineering properties for

product design and verification

TC188 ISO/DIS 14509-3 Small craft- Airborne sound emitted by powered recreational craft- Part 3:

Sound assessment using calculation and measurement proceed니res

96 기술표준

■5。시국제규격의 제 • 개정 동향

TC/SC 규격번호 규격명 칭

TC198 ISO/DIS 14161 Sterilization of health care procdicts・ Biologic기 indicators- G니dance for the

s이ection, use and interpretation of results (Revision of IS0 14161:2000)

TC199 ISO 12100-1:2003/ Safety of machinery- Basic concepts, general principles for design- Part 1:

DAmdl Basic terminology, methodology- Amendment 1

ISO 12100-2:2003/ Safety of machinery- Basic concepts, general principles for design- Part 2:

DAmdl Technical principles- Amendment 1

TC204 ISO/DIS 21217 Intelligent transport systems- Communications access for land mobiles

(CALM)- Architecture

TC206 ISO/DIS 26602 Fine ceramics (advanced ceramics, advanced technical ceramics)- Silicon

nitride materi기s for rolling bearing balls

TC211 ISO/DIS 19144-1 Geographic information- Classification systems- Part 1: Classification system

structure

TC213 ISO/DIS 25178-3 Geometrical product specifications (GPS)- Surface texture: Areal- Part 3:

Specification operators

TC215 ISO/HL7 DIS 27931 He기th informatics- HL7 Messaging Standards Version 2.5- An application

protocol for electronic data exchange in healthcare environments

ISO/HL7 디 S27932 Health informatics- Clinical document architecture, release 2

JTC1 ISO/IEC DIS Open Data Communication in Building Automation, Controls and Building

14908-1 Management- Control Network Protocol- Part 1: Protocol Stack

ISO/IEC DIS Open Data Communication in Building Automation, Contiols and Building

14908-2 Management- Contr이 Network Protocol- Part 2: Twisted Pair Communication

ISO/IEC DIS Open Data Communication in Building Automation, Controls and Building

14908-3 Management- Contr이 Network Protocol- Part 3: Power Line Channel

Specification

ISO/IEC DIS Open Data Communication in Building Automation, Controls and Building

14908-4 Management- Control Network Protocol- Part 4: IP Communication

TC22 ISO/FDIS 13837 Road vehi에es- Safety gluing materi기s・ Method for the determination of s에

transmittance

ISO/F 미 S 22900-1 Road vehicles- Modular vehi이e comm니nication interface (MVCI)- Part 1:

Hardware design requirements

TC23 ISO/FDIS 10998 Agricultural tractors- Requirements for steering


TC27 ISO/FDIS 23499 Coal- Determination of bulk density

TC28 ISO/FDIS 18132-2 Refrigerated light hydrocarbon fl니ids- General requirements for automatic level

gauges- Part 2: Ga니ges in refrigerated-type shore t레iks (Revision of ISO

8309:2991, IS0 10574:1993, IS0 13689:2001)

TC33 ISO/FDIS 21079-1 Chemical analysis of refractories containing alumina, zirconia and silica-

Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-

ray fluorescence method)- Part 1: Apparatus, reagents and dissolution

ISO/FDIS 21079-2 Chemical analysis of refractories containing alumina, zirconia and silica-




ray fluorescence method)- Part 2: Wet chemical analysis

ISO/FDIS 21079-3 Chemical analysis of refractories containing al니mina, zirconia and silica-


ray fluorescence method)- Part 3: Flame atomic absorption spectophotometry

(FAAS) and inductively coupled plasma emission spectrometry (ICP-AES)

TC34 ISO/FDIS 8292-1 Animal and vegetables fats and oils- Determination of solid fat content by

pulsed NMR- Part 1: Direct method


ISO/FDIS 8292-2 Animal and vegetables fats and oils- Determination of solid fat content by

pulsed NMR- Part 2: Indirect method


ISO/FDIS 20481 Coffee and coffee products- Determination of the caffeine content using high

performance liquid chromatography (HPLC)- Reference method

TC35 ISO/FDIS 21227-4 Paints and varnishes- Evaluation of defect on coated surfaces using optical

imaging-Part 4: Evaluation of filiform corrosion

TC38 ISO/FDIS 9073-9 Textiles- Test methods for nonwovens- Part 9: Determination of drapability

including drape coefficient(Revision of ISO 9073-9:1995)

TC43 ISO/FDIS 10846-1 Acoustics and vibration- Laboratory measurement of vibro-acoustic transfer

properties of resilient elements- Part 1: Principles and guidelines (Revision of

ISO 10846-1:1997)

ISO/F 미 S10846-2 Acoustics and vibration- Laboratory measurement of vibro-acoustic transfer

properties of resilient elements- Part 2: Direct method for determination of the

dynamic stiffness of resilient supports for translatory motion

(Revision of IS0 10846-2:1997)

ISO/F 이 S10846-5 Acoustics and vibration- Laboratory measurement of vibro-acoustic transfer

properties of resilient elements- Part 5: Driving point method for determination

of the low-frequency transfer stiffness of resilient supports for translatory

motion

TC44 ISO/FDIS 15012-2 Health and safety in welding and allied processes- Requirements, testing and

marking of equipment for air filtration- Part 2: Determination of the minimum air

volume flow rate of captor hoods and nozzles

ISO/FDIS 24373 Voiding consumables- S이id wires and rods for fusion voiding for copper and

copper alloys- Classification

TC45 ISO/FDIS 20299-3 Film for wrapping rubber bales- Part 3: Ethylene-propylene-diene

rubber(EPDM), acrylonitrile- butadiene rubber (NBR), hydrogenated nitrile

butadiene rubber (HNBR), acrylic-ethylene rubber(AEM) and acrylic rubber

(ACM)

TC54 ISO/FDIS 3061 Oil of black pepper (Piper nigrum L.) (Revision of ISO 3061:1979)

98一기술표준

기VEC 국제규격의 제 • 개정 동향


TC58 ISO/FDIS 4706-1 Gas cylinders- Refillable welded steel cylinders- Part 1: Test pressure 60 bar

and below (Revision of ISO 4706:1989)

TC59 ISO/F 미 S15392 S니staina에ity in building construction- General principles

ISO/FDIS 16938-1 Building construction- Determination of the staining of porous substrates by

sealants 니sed in joints- Part 1:Test with compression

ISO/FDIS 16938-2 Building construction- Determination of the staining of porous substrates by

sealants 니sed in joints- Part 2: Test without compression

TC61 ISO/F 미 S291 Plastics- Standard atmosphere for conditioning and testing


ISO/FDIS 4898 Rigid c이Mar plastics- Therm기 inflation prod니cts for buildings- Specifications


ISO/F 디 S 6721-2 Plastics- Determination of dynamic mechanic기 properties- Part 2: Torsion

pendulum method (Revision of ISO 6721-2:1994, ISO 6721-2:1994/Cor 1:1995)

IOS/FDIS 14127 Carbon-fibre-reinforced composites- Determination of the resin, fibre and void

contents

ISO/FIDS 20753 Plastics- Test specimens

ISO 22702:2003/ Utility lighters- General cons니mer-safety req니irements- Amendment 1:

FDAmd 1 Clarification and addition of safety signs to the instructions and warnings

section

TC67 ISO/FDIS 10414-1.2 Petroleum and natural gas industries- Field testing or drilling fluids- Part 1:

Water-based fluids (Revision of ISO 10414-1:2001)

ISO/FDIS 10416 Petrole니m and natural gas ind니stries- Drilling fl니ids- Laboratory testing

(Revision of IS0 10416:2002)

ISO/FDIS 20815 Petroleum, petrochemical and natural gas industries- Production assurance

and reliability management

TC68 ISO/FDIS 22307 Financial services- Privacy impact assessment

TC89 ISO/FDIS 12460-3 Wood-based parols- Determination of formaldehyde r이ease- Part 3: Gas

analysis method

ISO/FDIS 12460-4 Wood-based panels- Determination of formaldehyde release- Part 4:

Desiccator method

ISO/FDIS 16893-1 Wood-based parols- Particleboard- Part 1: Classifications

ISO/FDIS 16895-1 Wood-based panels- Dry-process fibreboards- Part 1: Classifications

TC92 ISO/FDIS 24473 Fire tests- Open calorimetry- Measurement of the rate of production of heat

and combustion products for fires of up to 40 MW

TC94 ISO/F 미 S13506 Protective clothing against heat and flame- Test method for complete

garments- Prediction of bum injury using an instrumented manikin

TC113 ISO/FDIS 1438 Hydrometry- Open channel flow measurement 니sing thin-plate weirs (Revision

of ISO 1438-1:1980, IS0 1438=1:1980/Amd 1:1998)


국제규격의 제 • 개정 동향


TC121

ISO/FDIS3454

IS0/FDIS 26825

Hydrometry- Direct depth sounding and suspension equipment (Revision of

ISO 3454:1983)

Anaesthetic and respiratory equipment- Use-applied labels for syringes

TC127 IS0/FDIS 15998.2

containing drugs used d니ring anaesthesia- Colours, design and performance

Earth-moving machinery- Machine-control systems (MCS) using electronic

TC131 IS0/FDIS 13726

components- Performance criteria and tests for functional safety

Hydra니ic fluid power- Single rod cylinders, 16 MPa(160 bar) compact series

TC145

IS0/F 미 S2101&1

IS0/F 미 S 21018-3

ISO/F 미 S 20712-1

with bores form 250 mm to 500 mm- Accessory mounting dimensions

(Revision of IS0 13726:1998)

Hydra니lie fluid power- Monitoring the level of partic니ate contamination of the

fluid- Part 1: General principles

Hydra니lie fluid power- Monitoring the level of partic니ate contamination of the

fluid- Part 3: Use of the filter blockage technique

Water safety signs and beach safety flags- Part 1: Specifications for water

TC146 ISO/FDIS 16000-12

safety signs used in workplace and public areas (Revision of ISO 20712-

1/DAmd 1, ISO20712-1/DAmd2, ISO20712-1/DAmd3, ISO 20712-1/DAmd 18)

Indoor air- Part 12: Sampling strategy for polychlorinated biphenyls (PCBs),

TC147 ISO/F 미 S 5667-20

polychlorinated dibenzo-b-dioxins (PCDDs), polychlorinated dibenzofurans

(PCDFs) and polycyclic aromatic hydrocarbons (PAHs)

Water quality- Sampling- Part 20: Guidance on the use of sampling data for

TC150 ISO/FDIS 13356

decision making- Compliance with thresholds and dassification systems

Implants for surgery- Ceramic materials based on yttria-stabilized tetragonal

TC159 ISO/F 디 S 9241-302

zirconia (Y-TZP)(Revision of IS0 13356:1997)

Ergonomics of human-system interaction- Part 302: Terminology for electronic

TC172

ISO/FDIS 9241-303

ISO/FDIS 9241-306

ISO/F 디 S 517

visu기 displays (Revision of ISO 9241-7:1998, ISO 13406-2:2001, ISO 13406-

1:1999)

Ergonomics of human-system interaction- Part 303: Req니irements for

electronic visu게 displays (Revision of ISO 9241-7:1998, IS0 13406-2:2001)

Ergonomics of human-system interaction- Part 306: Field assessment

methods for electronic visu게 displays

Photography- Apertures and related properties pertaining to photographic

TC190 ISO/FDIS 17616

lenses- Designations and measurements

(Revision of ISO 517:1996, ISO 517:1996/Cor 1:2006)

Soil q니ality- Guidance on the choice and eval니ation of bioassays for

TC198 ISO/FDIS 15883-4

ecotoxicological characterization of soils and soil materials

Water-disinfectors- Part 4: Requirements and tests for washer-disinfectors

TC215 ISO/FDIS 21549-5

employing chemical disinfection forthermolabile endoscopes

Health informatics- Patient healthcard data- Part 5: Identification card

ISO/FDIS 21549-6 Health informatics- Patient healthcard data- Part 6: Administrative data

100 기술표준


(TC/SC규격번호

규격명 칭 )

TC219 IS0/FDIS 24344 Resilient floor coverings- Determination of flexibility and deflection

TC221 IS0/FDIS 10321 Geosynthetics- Tensile test for joints/seams by wide-width strip method


JTC1 ISO/IEC FDIS 2382-36

ISO/EC 8825-2:2002/

FDAmd 3

ISO/IEC 8825-4:2002/

DAmd3

ISO/IEC FDIS

10373-7

ISO/IEC 11801:2002/

FDAmd 1

ISO/IEC 14496-3:2005/

FDAmd 8

ISO/IEC 14496-4:2004/

FDAmd 23

ISO/IEC 14496-5:2001/

FDAmd 13

ISO/IEC 14776-453

ISO/IEC 15938-5:2003/

FDAmd 3

ISO/IEC 15938-7:2003/

FDAmd 4

ISO/IEC FDIS

19778-1

ISO/IEC FDIS

19778-2

ISO/IEC FDIS

19778-3

ISO/IEC FDIS

19780-1

ISO/IEC FDIS

23000-4

Information technology- Vocabulary- Part 36: Learning, education nad

tranining

Information technology- ASN.1 encoding rules: Specification of Packed

Encoding R니es (PER)- Part 2: Amendment 3: PER encoding instructoins

Information technology- ASN.1 encoding rules: XML Encoding Rules (XER)-

Part 4: Amendments： PER encoding instructions

Identification cards- Test methods- Part 7: Vicinity cards

(Revision of ISO/IEC 10373-7:2001)

Information technology- Generic cabling for customer premises- Amendment 1

Information technology- Coding of a니dio-vis니al objects- Part 3: A니dio・

Amendment 8: MP4FF box for origin기 audio file information

Information technology- Coding of audio-vis니기 objects- Part 4: Conformance

testing- Amendment 23: Synthesized texture conformance

Information technology- Coding of audio-vis니al objects- Part 5: Reference

software- Amendment 13: Geometry and shadow reference software

Information technology- Small Computer System Interface(SCSI)- Part 453:

SCSI Primary Commands 3 (SPC-3)

Information technology- Multimedia content description interface- Part 5:

Amendment 3: Improvements to geographic descriptor

Information technology- M니timedia content description interface- Part 7:

Conformance testing- Amendment 4: Improvements to geographic descriptor

conformance

Information technology- Learning, education and training- Collaborative

technology- Collaborative workplace- Part 1: Collaborative workplace data

model


technology- Collaborative workplace- Part 2: Collaborative environment data

model


technology- Collaborative workplace- Part 3: Collaborative group data model


technology- Collaborative learning communication- Part 1: Text-based

communication

Information technology- M니timedia application format (MPEG-A)- Part 4L

Musical slide show application format


나. IEC 국제규격（안）


2/1488/FDIS IEC 60034-4 Ed.3 Rotating electrical machines - Part 4: Methods for determining synchronous

machine quantities from tests

17A/809F/CDV CEI62271-104 Ed.1 Appareillage a haute tension - Partie 104: Interrupteurs a courant alternatif pour

tensions assignees egales ou superieures a 52 kV

23F/177/CDV IEC 61210 Ed.2 Connecting devices - Flat quick-connect terminations for electrical copper

conductors - Safety requirements

34/117/CDV IEC 61547 Ed.2 Equipment for general lighting purposes - EMC immunity requirements

46C/843/CDV IEC 61156-8 Multicore and symmetrical pair/quad cables for digital communications - Part 8:

Symmetrical pair/quad cables with transmission characteristics up to 1200 MHz -

Work area wiring - Sectional specification

46C/844/CDV IEC 61156-5 Multicore and symmetrical pair/quad cables for digital communications - Part 5:

Symmetrical pair/quad cables with transmission characteristics upto 1000 MHz-

Horizontal floor wiring - Sectional specification

51/910/FDIS IEC 62317-13, Ed. 1 Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply

applications

61/3539/FDIS IEC60335-2-3-A2Ed5.0 Household and similar 이ectrical appliances - Safety - Part 2-3: Partic니ar

「eq니「ements for electric irons

61/3540/FDIS EC 60335-2-10-

Al Ed 5.0

Household and similar electrical appliances - Safety - Part 2-10: Partic니ar

requirements for floor treatment machines and wet scrubbing machines

61/3541/FDIS EC 60335-2-12-

Al Ed 5.0

Household and similar 이ectrical appliances - Safety - Part 2-12: Partic니ar

「eq니i「ements for warming plates and similar appliances

61/3542/F 디 S EC 60335-2-16-

Al Ed 5.0

Household and similar 이ectric기 appliances - Safety - Part 2-16: Partic니ar

requirements for food waste disposers

61/3543/F 디 S EC 60335-2-26-

Al Ed 4.0


requirements for clocks

61/3544/F 디 S EC 60335-2-28-

Al Ed 4.0


req니『ements for sewing machines

61/3545/FDIS EC 60335-244-

Al Ed 3.0


requirements for ironers

61/3546/FDIS IEC 60335-2-52-

Al Ed 3.0

Household and similar electric기 appliances - Safety - Part 2-52: Partic니ar

requirements for oral hygiene appliances

61/3547/FDIS IEC 60335-2-55-

Al Ed 3.0


requirements for electrical appliances for use with aquariums and garden ponds

61/3556/FDIS IEC 60335-2-51-

Al Ed 3.0


requirements for stationary circulation pumps for heating and service water

installations

61/3557/FDIS EC 60335-2-56- Household and similar 이ectric기 appliances - Safety - Part 2-56: Partic니ar

102 기술표준

■5。시국제규격의 제 • 개정 동향


A1 Ed 3.0 requirements for projectors and similar appliances

61/3558/FDIS IEC 60335-2-101

-A1 Ed 1.0

Household and similar 이ectric기 appliances - Safety - Part 2-101: Particular

requirements for vaporizers

65B/656/CDV EC 60770-1 Transmitters for use in industrial-process control systems - Part 1: Methods for

performance evaluation

65B/657/CDV EC 60700-2 Transmitters for use in industrial-process control systems - Part 2: Methods for

inspection and routine testing

68/363/CDV Amendment 2 to

IEC 60404-4 Ed. 2.0

Magnetic materiels - Part 4: Methods of measurement of d.c. magnetic

properties of magnetically soft materials

72/760/FDIS IEC 60730-2-7 Ed.2 Automatic electrical controls for household and similar use - Part 2-7: Partic니ar

requirements for timers and time switches

82/511/FDIS IEC 60904-3 Ed.2 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic

(PV) solar devices with reference spectral irradiance data

100/1342/CDV IEC 61883-8 Consumer audio/video equipment - Digital interface - Part 8: Trnasmission of

ITU-R BT.601 style digital video data

100/1343/CDV IEC 60728-2 Cable networks for television sign게s, sound signals and interactive services -

Part 2: Electromagnetic compatibility of equipment

105/179/CDV IEC 62282-6-300 Ed.1 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge

interchangea 네 ity

1/2056A/CDV IEC 60050-212 Ed.2 International Electrotechnical Vocabulary (EV) - Part 212: Electrical insulating

solids, liq니ds and gases

3/889/CDV IEC 81346-1 Ed.2 Industrial systems, installations and equipment and ind니strial prod니cts -

Structuring principles and reference designations - Part 1: Basic mles

3C/1569A/CDV IEC 80416-1 Ed.2 Basic principles for graphic게 symbols for use on equipment - Part 1: Creation of

graphical symbols for registration (2nd CDV)

17A/815/F 디 S IEC 62271-100 Ed.2 High-voltage switchgear and controlgear - Part 100: Alternating current circuit

breakers

32/187/DTR IEC 60943 TRA1 Ed. 2.0 Guidance concerning the permissible temperature rise for parts of electrical

equipment, in particular for terminals

34A/1267/FDIS EC 60432-3 A2 Ed. 1 Amendment 2 to IEC 60432-3 Ed.1: Incandescent lamps - Safety specifications

- Part 3: Tungsten-halogen lamps (non-vehi 이 e)

34D/889/FDIS IEC 60598-1 Ed.7 Luminaires - Part 1: General requirements and tests

61/3559/FDIS IEC 60335-2-45-

Al Ed 3.0

Househ이d and similar electrical appliances - Safety - Part 2-45: Particular

requirements for portable heating tools and similar appliances

95/227/FDIS IEC 60255-22-2 Ed.3 Measuring relays and protection equipment - Part 22-2: Electrical disturbance

tests - Electrostatic discharge tests

95/228/FDIS IEC 60255-22-4 Ed.3 Measuring relays and protection equipment - Part 22-4: Electrical disturbance

tests - Electrical fast transient/burst immunity test



97/130/CDV IEC 61822 Ed.2 티ectric기 inst기lations for lighting and beaconing of aerodromes - Constant

current regulators

100/1346/CDV IEC 62516 Terrestrial digital multimedia broadcasting (T-DMB) receivers (TA1)

112/90/CDV IEC 61858 Ed. 3.0 Electrical insulation systems - Thermal evaluation of modifications to an

established wire-wound EIS

112/91/CDV EC 61857-22 Ed. 2.0 Electric게 ins니ation systems - Procedures for thermal ev기uation - Part 22:

Specific req니irements for encaps니ated-coil model - Wire-wound electrical

ins 니 ation system (티 S)

7/587/F 디 S IEC 62420 Ed. 1.0 Concentric lay stranded overhead electrical conductors containing one or more

gap(s)

62D/671/FDIS IEC 60601-2-16, Ed. 3 Medical electrical equipment - Part 2-16: Partic니ar requirements for basic safety

and essential performance of haemodialysis, haemodiafiltration and

haemofiltration equipment

68/365/FDIS Amendment 1 to

IEC 60404-2 Ed. 3.0

Magnetic materials - Part 2: Methods of measurement of the magnetic

properties of electrical steel sheet and strip by means of an Epstein frame

78/724/CDV IEC 61477 A3 Ed.1 Live working - Minimum requirements for the utilization of tolls, devices and

equipment

86B/2683/FDIS IEC 61758-1 Ed. 1.0 Fibre optic interconnecting devices and passive components - Interface standard

for closures - Part 1: General and guidance

86C/808/CDV IEC 62148-11 Ed. 2.0 Fibre optic active components and devices - Package and interface standards -

Part 11:14-pin active device modules

3/889F/CDV CEI81346-1 Ed.2 Systemes ind니striels, installations et appareils, et produits industriels - Principes

de structuration et designations de reference - Partie 1: Regies de base

13/1424/FDIS EC 62055-52 Electricity metering - Payment systems - Part 52: Standard transfer specification

(STS) - Physical layer protocol for a two-way virtual token carrier for direct local

connection

22/133/CDV IEC 60146-1-1 Semiconductor converters - General requirements and line commutated

converters - Part 1-1: Specification of basic requirements

27/628/CDV IEC 60703 Ed.2 Test methods for electroheating installations with electron guns

32A/261/F 디 S IEC 60282-2 Ed. 3.0 High-v이tage fuses - Part 2: Expulsion fuses

37A/200/FDIS IEC 61643-21 A1 Ed. 1.0 Low voltage s니rge protective devices - Part 21: S니rge protective devices

connected to telecommunications and signalling networks - Performance

requirements and testing methods

40/1897/FDIS IEC 60393-1 Potentiometers for use in electronic equipment - Part 1: Generic specification

45A/694/FDIS IEC 61227 Ed.2 Nuclear power plants - Control rooms - Operator controls

45B/579/FDIS IEC 62363 Ed.1 Radiation protection instrumentation - Portable photon contamination meters

and monitors

48D/371/CDV IEC 60297-3-100 Ed.1.0 Mechanical stmctures for electronic equipment - Dimensions of mechanical

104 기술표준


(TC/SC규격번호

규격명 칭 )

structures of the 482,6 mm (19in) series - Part 3-100: Basic dimensions of front

panels, subracks, chassis, racks and cabinets

48D/372/CDV IEC 60297-3-105 Ed.1.0 Mechanical structures for electronic equipment - Dimensions of mechanic게

structures of the 482,6 mm (19in) series - Part 3-105: Dimensions and design

aspects for 1U chassis

55/1056/FDIS IEC 60317-0-3 Ed. 3.0 Specifications for particular types of winding wires - Part 0-3: General

requirements - Enam 에 ed round 시니 min 니 m wire

57/919/CDV IEC 61850-6 Ed.2 Communication networks and systems for power utility automation - Part 6:

Configuration description language for communication in electrical substations

related to lEDs

61/3562/FDIS IEC 60335-2-17-

A2Ed2.0

Househ이d and similar electrical appliances - Safety - Part 2-17: Particular

requirements for blankets, pads and similar flexible heating appliances

61 타616/F 히 S IEC 60335-2-39-A2

Ed 5.0

Household and similar electrical appliances - Safety - Part 2-39: Particular

requirements for commercial electric multi-purpose cooking pans

61 타6177FDIS IEC 60335-2-49-A1

Ed 4.0

Household and similar electrical appliances - Safety - Part 2-49: Particular

requirements for commercial electric hot cupboards

65C/495/F 미 S IEC 62439 High availability automation networks

82/512/FDIS EC 61646 Ed.2 Thin-film terrestrial photovoltaic (PV) mod니es - Design qualification and type

approval

86A/1203/FDIS EC 60794-3-30 Ed. 2.0 Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical

telecommunication cables for lakes, river crossings and coastal applications

86A/1204/FDIS EC 60794-2-50 Ed. 1.0 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex

and duplex ca네es for use in terminated ca)le assem니ies

86B/2690/CDV IEC 61300-3-35 Ed.1.0 Fibre optic interconnecting devices and passive components - Basic test and

measurement procedures - Part 3-35: Examinations and measurements - Fibre

optic cylindrical connector endface visual and automated inspection

100/1354/FDIS EC 62480 Multimedia home network - Network interfaces for network adapter (TA9)

104/446F/CDV C티 60068-2-14 Ed. 6.0 Essais d'environnement - Partie 2-14: Essais - Essai N: Variations de

temperature

104/447F/CDV C티 60068-2-38 Ed. 2.0 Essais d' environnement - Partie 2-38: Essais - Essai Z/AD: Essai cy이ique

composite de temperature et d' humidity

104/456/FDIS EC 60068-2-64 Ed. 2.0 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random

and guidance

112/93/CDV IEC 61857-21 Ed. 3.0 Electrical insolation systems - Proced니res for therm시 evaliation - Part 21:

Specific requirements for general-purpose models - Wire-wound applications

112/92/CDV IEC 61857-1 Ed. 3.0 Electrical insulation systems - Procedures for thermal evaluation - Part 1:

General requirements - Low-voltage


Documents

ISkoreascience.or.kr/article/JAKO200841557526284.pdf · (Revision of ISO 4073:1980) TC107 ISO/DIS 17334 Metallic and other inorganic coatings- Autocatalytic nickel over autocatalytic