the

dif

fere

nce

is R

EAL™

Revit MEP 2014 Add-in SysQue™

June 17, 2013 - 14:15

Managed manufacturer specific objects and data in BIM

Jim Reis, CFO

TSI

JReis@TSI-Software.com

the

dif

fere

nce

is R

EAL™

TSI provides solutions that enable designers and contractors to develop fully-constructible CAD or Revit models with “real-world” intelligent MEP components and ductwork.

• Model, schedule, estimate (cost), fabricate & install — all from a single database

• Yields speed and accuracy in the construction process

• Reduces labor costs, increases efficiency and productivity and improves quality — in the pre-fab shop and on the job site

TSI Overview: What We Do

the

dif

fere

nce

is R

EAL™

AIA Levels of Development

LOD 200 - Similar to schematic design or design development, the model would consist of "generalized systems or assemblies with approximate quantities, size, shape, location and orientation." Authorized uses would include "analysis of selected systems by application of generalized performance criteria."

LOD 100 - Conceptual design, the model consists of overall building massing and the downstream users are authorized to perform whole building types of analysis (volume, building orientation, cost per square foot, etc.)

LOD 300 - Model elements are suitable for the generation of traditional construction documents and shop drawings. As such, analysis and simulation is authorized for detailed elements and systems

LOD 400 - Suitable for fabrication and assembly. The MEA for this LOD is most likely to be the trade contractor or fabricator as it is usually outside the scope of the architect's or engineer's services.

LOD 500 - The final level of development represents the project as it has been constructed - the as-built conditions. The model is suitable for maintenance and operations of the facility.

the

dif

fere

nce

is R

EAL™

SysQue LOD

LODs go from the lowest level of conceptual approximation to the highest level of representational precision:

• 100 Conceptual

• 200 Approximate geometry

• 300 Precise geometry

• 400 Fabrication

• 500 As-built

The BOM from SysQue is created to LOD 400

• The service reports live, directly from the cloud that is home to hundreds of thousands of line items.

• Revit families that need to flex more than one size require size-dependent values for weight, cost and install times.

• SysQue keys off a unique data ID, including size, to return detailed reports that export directly from Revit MEP with SysQue BOM to Excel.

the

dif

fere

nce

is R

EAL™

What is SysQue™

Revit MEP 2014 Data Content Service

the

dif

fere

nce

is R

EAL™

Labor

Material Cost

Live Updates

Cloud BOM Download Data

Part No.

Weight

Labor

Material Cost

Live Updates

Part No.

Weight

the

dif

fere

nce

is R

EAL™

• SysQue™ Pipe enables real manufacturers’ content to be modeled by designers and contractors with construction and fabrication levels of development (LOD 300 and 400).

• Includes pipe connectivity, true cut length, fitting counts, and auto flanges

• Supports tee-drill, thread-o-lets, stub-in taps on pipes.

• Associated PDF is accessible directly in native Revit.

SysQue™ Pipe

the

dif

fere

nce

is R

EAL™

• Duct Construction Standards, including Ductwork Pressure Classes, directly in Revit.

• Includes saddle taps and allows flat/round or round/round in one system.

• Associated PDF with specifications is also accessible directly in native Revit.

SysQue™ Duct

the

dif

fere

nce

is R

EAL™

• HVAC duct reports with depth lengths and offsets

• Export to Excel

SysQue™ Fabrication Reports

the

dif

fere

nce

is R

EAL™

• A cloud-based MEP managed content service downloaded directly to Revit MEP

• Includes real manufacturer-

specific Revit MEP content • Issues update notification when

manufacturers change or update content information

• ISO 9001:2008 certified for BIM

data content management for MEP

SysQue™ Data

the

dif

fere

nce

is R

EAL™

• SysQue BOM creates detailed bills of material to LOD 400 constructible definitions as defined by the AIA BIM standards.

• Reports live from the Building Data cloud database, home to nearly one million line items.

• Families that need to flex more than one size require size dependent values for weight, cost and install times. SysQue returns detailed reports that export directly from Revit MEP to Excel.

SysQue™ BOM

the

dif

fere

nce

is R

EAL™

• Model real manufacturers’ hangers directly in Revit MEP with accurate hanger rod lengths and structural attachments (beam clamps or inserts).

• Includes output to Trimble MEP Total Station units in both MEP or TFL file format.

• Hangers and supports are structure-aware and adjust hanger spacing and rod length based on structural beams, versus the under side of the floor above.

SysQue™ Supports

the

dif

fere

nce

is R

EAL™

• Model to LOD 400, suitable for fabricating

isometric spools directly in Revit MEP.

• Built-in spool management for color isolation; standard naming conventions make isometric spool creation fast and accurate.

• Intelligent interface automates sheet views, bill of material (BOM) schedules, component annotation and the dimensioning process.

• Unlike the AutoCAD spooling (one DWG one spool), Revit MEP allows for true BIM spool sheets in Revit mechanical model.

• Integrate seamlessly with iPad or Tablet using 360.Autodesk.com cloud solutions.

SysQue™ Spool

the

dif

fere

nce

is R

EAL™

SysQue™ License

• SysQue is a Revit MEP 2014 content and configuration service.

• Concurrent licenses are shared in the cloud via the Internet

• SysQue licensing is good for 365 days (non-perpetual license)

• Your software investment can be an accounting

expense verses capitalization over 36 months.

• Service includes all SysQue Revit MEP 2014 content

www.Building-Data.net Company: TSI-Software

Divison: Rocklin, CA

SysQue License Pull: Total Quanity: 3 Checked-out: 2 Available: 1

Name First Last E-Mail

User 1 Jim Reis jreis@tsi-software.com 1 Checked-out

User 2 Kenny Eastman keastman@tsi-software.com 1 Checked-out

User 3 Bernie Tamasy btamasy@tsi-software.com Checked-in

User 4 Nate Moore nmoore@tsi-software.com Checked-in

User 5 Bill Whitney bwhiteny@tsi-software.com Checked-in

the

dif

fere

nce

is R

EAL™

Revit MEP 2014 Add-in SysQue™

June 17, 2013 - 14:15

Managed manufacturer specific objects and data in BIM

Jim Reis, Founder/CFO

TSI

JReis@TSI-Software.com