Upload
pravin-prathip-j
View
217
Download
0
Embed Size (px)
Citation preview
8/3/2019 revos
http://slidepdf.com/reader/full/revos 1/20
W e i v e t , Y u s u c c e e !
With only
3 instruments!
Revo-S™
An endo revolution
8/3/2019 revos
http://slidepdf.com/reader/full/revos 2/20
2
Rvlutionary 4
Rv-S™
SC1 SC2 SU 6
AS30 AS35 AS40 12
Rv-S™
Rv-S™
Mk yur nd easy 19
The MicRo-Mega® + 18
Rev-S™
Ctets
8/3/2019 revos
http://slidepdf.com/reader/full/revos 3/20
3
n Intended for initial endodontic
treatments, Revo-S™ innovates with nly
3 instrumnts.
n Its asymmetrical section initiates a
snake-like movement of the instrument
inside the canal.n Hih prfrmanc and simpl t us,
this sequence is adapted for most root
canal anatomies.
Rev-S™, A uique aivatig sequece
Only
3 instruments
8/3/2019 revos
http://slidepdf.com/reader/full/revos 4/204
Th Micro-Mega® +IGeT®
r Cassics system
revolutionary!
8/3/2019 revos
http://slidepdf.com/reader/full/revos 5/205
n The asymmetrical cross section provides less stress on the instrument.
The canal axis has 3 cutting edges located on 3 different radiuses:
R1, R2 and R3.
n The smaller section allows more flexibility, and offers a better ability
to negotiate curves.
n The asymmetrical cross section increases the available volume for
upward debris elimination.
Th nstumnt wks n yl wy (3c cnpt):
1) cuttn
2) cln (dbs lmntn)
3) clnn
Asymmtrical sctin Symmtrical sctin
R 3 R 1
R 2
The asymmetrica crss secti A asymmetrica crss secti:mre exibiity a ess stress
8/3/2019 revos
http://slidepdf.com/reader/full/revos 6/206
Root canal cleaningand shapingRoot canal finishing
n SU smoothes the root canal walls. Owing to its
asymmetrical section, it recapitulates the action
of the first two instruments SC1 and SC2, thusrespecting the tapered shape of the canal. It performs
excellent upward removal of the dentine debris, and
an improved cleaning.
An adequate canal preparation with an apical
finishing of .06.
SC2Equilateral secti
SC1 Asymmetrical secti
SU, asymmetricalsecti, recapitulatesthe acti f the firsttw istrumets
"
Revo-S™
SC1 SC2 SU A custmize treatmetusig 3 istrumets n Inactive tip.
n The extended helical machining up to the coronal
region increases the instrument flexibility.
n Reduction of the contact lengths of the blade on the
dentine: reduction of stress.
n Better debris elimination and more efficient cleaning
owing to the asymmetrical cross section of the SC1.
n The SC2 instrument has a symmetrical cross section,
with a .04 taper allowing better penetration.
Its equilateral section (3 identical edges) ensures a
perfect guidance of the instrument up to the apical
region of the canal, owing to the balance of the forces.
n Respect of the canal anatomy to the apical region isguaranteed by the equilateral section of the SC2: no
zipping.
n The excellent upward debris removal minimises debris
packing in the apical region and beyond.
n The progressive pitch avoids screwing effects.
A D v A n t A
g e s
n Optimal cleaning.
n Adapted active length.n The extended cutting part in the coronal region
increases instrument flexibility.
n Optimal upward removal of dentine debris.
8/3/2019 revos
http://slidepdf.com/reader/full/revos 7/207
Root canal cleaningand shaping
Root canal finishing
21 mm
25 or 29 mm
25 or 29 mm
SC1
(Shaper® & Cleaner 1)
N°25 .06
SC2
(Shaper® & Cleaner 2)
N°25 .04
SU
(Shaper® Universal)
N°25 .06
InGeT®
istrumets
8/3/2019 revos
http://slidepdf.com/reader/full/revos 8/208
Root canal cleaningand shapingRoot canal finishing
SC2Equilateral secti
SC1 Asymmetrical secti
SU, asymmetricalsecti, recapitulatesthe acti f the firsttw istrumets
Revo-S™
SC1 SC2 SU
8/3/2019 revos
http://slidepdf.com/reader/full/revos 9/20
9
Root canal cleaningand shaping
Root canal finishing
Classics istrumets
21 mm
25 or 29 mm
25 or 29 mm
SC1
(Shaper® & Cleaner 1)
N°25 .06
SC2
(Shaper® & Cleaner 2)
N°25 .04
SU
(Shaper® Universal)
N°25 .06
8/3/2019 revos
http://slidepdf.com/reader/full/revos 10/20
10
SC 1
SC 2
Canal finishin
SU
Basic squnc with nly 3 instrumnts
WL: working length
WL
WL
2/3 WL
Revo-S™
SC1 SC2 SU A simpe prtc r eiciet treatmets
8/3/2019 revos
http://slidepdf.com/reader/full/revos 11/20
11
Rotation speed between 250 and 400 rpm
Initial pntratin
n The first step comprises an initial penetration of the canal, using a
conventional stainless steel hand instrument (usually a K file N°10 - MMC
n°10 L21 mm) which provides information about the canal anatomycomplementary to that obtained by the pre-operative X-rays.
n The use of ENDOFLARE® is recommended (The MICRO-MEGA® +).
n The instruments should be removed frequently from the canal and cleaned,
using a compress in order to eliminate the dentine debris.
optv dynms
n Revo-S™ instruments should be used with a rotation speed ranging
between 250 and 400 rpm.
l Use SC1 with slow and unique downward movement in a free
progression and without pressure.
l Use SC2 with a progressive 3 wave movement.
l Use SU with a slow and unique downward movement in a free
progression and without pressure. Then check apical patency and if
necessary, perform an upward circumferential filing movement.
itn
n The canal should be thoroughly irrigated using sodium hypochlorite (2.5
to 5%) between the use of each instrument. The use of a chelating colloid
(gel) (MM-EDTA Cream recommended) is advised for instrument lubrication
and dentine debris removal (The MICRO-MEGA® +).
Th Micro-Mega®+: EndoflARE®
The use of ENDOFLARE ® is recommended: it eliminatescoronal strains, improves the access to canal entrances, and facilitates the insertion of shaping instruments such as Revo-S™.
Th Micro-Mega®+:
MM-EdTA CreamMM-EDTA Cream makes each step of
your treatment easy!n Ensures effective cleaning and
shaping of the root canal system.n Lubricates.n Facilitates file access and
penetration.n Saves time.
Avice a recmmeatis
8/3/2019 revos
http://slidepdf.com/reader/full/revos 12/20
12
WL: working length
AS30
AS35
AS40
WL
WL
WL
For a successful canal preparation, apical finishing is
essential: MICRO-MEGA® offers an optional adapted
solution with specific instruments: AS30, AS35, AS40.
These instruments enable efficient widening of the apical
preparation to .06 taper respecting the preparation
performed with SC1, SC2 and SU. This finishing enables
an improved flow of the irrigating solution promoting
efficient disinfection and facilitated obturation.
Flexibility and efficiency of the instruments
for a successful apical finishing.
Revo-S™
AS30 AS35 AS40
A D v A n t A g e s
n Shaping down to the working length:
more accurate finishing of the apical 1/3.
n Efficient disinfection: the irrigating solution penetrates
to the apical 1/3.
n Optimal cleaning.
n The instruments dedicated to the apical area are
tapered at .06.
n Asymmetrical cross section.
n The extended helical machining up to the coronal
region enables a continuous bending of the
instrument.
Apica iishig
8/3/2019 revos
http://slidepdf.com/reader/full/revos 13/20
13
Apical finishing
25 or 29 mm
25 or 29 mm
25 or 29 mm
AS30
(Apical Shaper® 30)
N°30 .06
AS35
(Apical Shaper® 35)
N°35 .06
AS40
(Apical Shaper® 40)
N°40 .06
InGeT®
istrumets
8/3/2019 revos
http://slidepdf.com/reader/full/revos 14/20
14
WL: working length
AS30
AS35
AS40
WL
WL
WL
Revo-S™
AS30 AS35 AS40
8/3/2019 revos
http://slidepdf.com/reader/full/revos 15/20
15
Apical finishing
Classics istrumets
25 or 29 mm
25 or 29 mm
25 or 29 mm
AS30
(Apical Shaper® 30)
N°30 .06
AS35
(Apical Shaper® 35)
N°35 .06
AS40
(Apical Shaper® 40)
N°40 .06
8/3/2019 revos
http://slidepdf.com/reader/full/revos 16/20
16
40/100apical finishin
35/100apical finishin
30/100apical finishin
Bring the AS 30 to the WL* Bring the AS 35 to the WL* Bring the AS 40 to the WL*
*WL: working length
AS30
AS30
AS30
AS35
AS35 AS40
WL
WL WL
WL WL WL
Revo-S™
AS30 AS35 AS40 AS prtc: r a perecty sae iishig
8/3/2019 revos
http://slidepdf.com/reader/full/revos 17/20
17
n The AS instruments should be used without apical pressure, after using
the SU.
n If necessary and according to the root canal anatomy, use the AS30, AS35
and AS40 to enlarge the apical region.
n Their penetration depth corresponds to the working length. This length is
shortened in thin root canals or with a marked curvature. They are then
used in a step back motion (AS30 at WL, AS35 at WL – 0.5 mm, AS40 at
WL – 1 mm if necessary).
n For a perfect apical finishing, use the sequence:
l AS30 only for an apical finishing at 30/100. l AS30 then AS35 for an apical finishing at 35/100.
l AS30 then AS35 and finally AS40 for an apical finishing at 40/100.
n If an AS instrument fails to reach the working length, continue the preparation
using the former instrument in order to work without any apical pressure.
Avice a recmmaatis
8/3/2019 revos
http://slidepdf.com/reader/full/revos 18/20
18
n MM-GP PitsMM-GP Points are .04 or .06 taper gutta percha points for
filling root canals prepared with NiTi files.
MM-Seal™ + Pastinject®
n MM-Sea™MM-Seal TM is a high quality, epoxy resin-based, paste/paste
sealer for permanent filling of root canals using gutta percha.Its outstanding chemical and physical properties guarantee
an excellent root canal seal. Eugenol-free, biocompatible and
radiopaque, it can be used for all types of gutta percha fillings.
n Pastiject®For an optimal application of the sealing materials, calcium
hydroxide and paste.
n HERoi®
Herofill® is a third generation obturation method, based on the
principle of a solid plastic core coated with thermoplastic guttapercha. This method offers outstanding accuracy and safety.
Plastic shaftClassics type
The MICRo-MEGA®
+
A perect successu iig
8/3/2019 revos
http://slidepdf.com/reader/full/revos 19/20
19
n The imprve visibiity a accessibiity
ere by the Cassics istrumets use with
AX’S E® reuces stress urig treatmet.
n The extreme simpiicati the IGeT®
mechaism prvies better access isie
the muth, thus imprvig the wrkig
cmrt.
n Apex catr. Its avace techgy a great simpicity
imprve yur rt caa treatmets.
Make yur e easy !
APEX Piter ™
+
AX’S E®
IGeT®
8/3/2019 revos
http://slidepdf.com/reader/full/revos 20/20
www.micr-ma.cmwww.rv-s.cm
J C
. A
U G
É n w
w w . j c
a u g e . c
o m
r e f . 6 0 3 0 1 5 8 9 -
B -
0 7 / 1 0
M I C R O - M
E G A ®
r e s e r v e s
t h e r i g
h t t o m o
d i f y t h e c
h a r a c
t e r i s
t i c s o
f i t s i n s
t r u m e n
t s w
i t h o u
t n o
t i c e .
P i c t u r e s n o n c o n
t r a c
t u a
l .
MICRo-MegA®
Intrnatinal DistributinTel.: +33 (0)3 81 54 42 34Fax: +33 (0)3 81 54 42 [email protected]
MICRo-MegA®
5-12, rue du TuelF-25006 BESAnçon cedexFRAnCE