RFP # 6163 · Web viewIncludes tray support, gasket, air valve, bolts and cable strain relief, 6 sealing washer trees, 2 plugs, 4 cable ties, 1 sheath scuff, 3 hose clamps, 3 K-connectors

RFP # 6163Technical Specifications

Supply of Communications Cable and SuppliesEXHIBIT 3

The scope of work shall be finalized upon the selection of the Firm. The respondent’s submission shall have accurately described your understanding of the objectives and scope of the requested products and services and provided an outline of your process to implement the requirements of the Scope of Work and Services. It is anticipated that the scope of work will include, at a minimum, the following:

SECTION A: COMMUNICATIONS SUPPLIES BRAND ONLY

1. BELDEN # 5288US: CABLE, SIAMESE CAT 5E +16/2STR, R/W, 1000'/RL; ONLY

Beldon Multi Conductor Category 5E Non-bonded- Pair Cable: CAT 5E (200 MHz) 4 pair U/UTP Unshielded , Riser-CMR, Premise Horizontal Cable, 24 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Ripcord, PVC Jacket (equivalent to Insulation Material: PO Polyolefin

A. Outer Shield Material: UnshieldedB. Outer Jacket Material: PVC- Polyvinyl ChlorideC. Outer Jacket Diameter: 0.19D. Applicable Specifications and Agency Compliance

1) NEC/ (UL) Specification CMR2) NEC Articles: 8003) CEC/C (UL) Specification CMR4) EU directive 2011/65/EU (ROHS II) Yes5) Other Standards ISO/IEC ed. 2.1 (2008) Class D6) Telecommunication Standards Category 5E- TIA 568.C.27) Other Specifications NEMA WC-63.1 Category 5E

2. BELDEN # BDN25R/ HITACHI #30093-50: CABLE, 25PAIR CAT5E (2500'/RL), ONLYAcceptable brands: Beldon IBDN25R Multi Conductor Category 5E Non-bonded- Pair Cable: CAT 5E (100 MHz) 25- pair U/UTP Unshielded , Riser-CMR, Premise Backbone Cable, 24 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Ripcord, PVC Jacket (Insulation Material: PO Polyolefin

A. Outer Shield Material: UnshieldedB. Outer Jacket Material: PVC- Polyvinyl ChlorideC. Overall Nominal Diameter: 0.510 inD. Applicable Specifications and Agency Compliance

1) NEC/ (UL) Specification CMR2) CEC/C (UL) Specification CMR3) EU directive 2011/65/EU (ROHS II) Yes4) Telecommunication Standards Category 5E- TIA 568.C.25) Other Specifications NEMA WC-63.1 Category 5E

Hitachi SKU: 30093-50 Description: Hitachi, Cat5e PowerSum Riser Cable; 25-Pair, 24 AWG Solid, Bare Copper, UTP

Page 1 of 136183 – Exhibit 3









3. ANIXTER WIRE, ANIXTER #6G-1401-02: WIRE, TRACE 19STR BARE CU, 2500’SPOOL,ONLY

APPROVED MANUFACTURERS | 6G-1401-02 | Cable, 14 AWG, 1 Conductor, THHN/THWN 19STR bare copper 90C 600V color black. Anixter #:6G-1401-02




4. MULTI LINK REPLACEMENT PANEL #FRM-E-4RU/ #10-4534 : CABINET, 72 PATCH PANEL, FRM-4RU-12X-TS, ONLY

Enclosure, Rack Mount, with Slide out Tray, Multilink FRM-4RU-12X-TS (10-4534) Holds 12 panelsGeneral Specifications:Dimensions: 7.12” H x 17.0” W x 13.25” DCapacity: The unit can support patching, patching and splicing- Terminations: (12) Multilink Termination Panels,- Splices: Up to 96 single fused fiber splices using four 2000-SSTA splice traysMaterial: .060” AluminumCoatings: Electro statically applied powder coat, black

5. DAKOTA BEAM BREAKER SENSOR - ALERT #BBT-2500: ONLY

The BBA-2500 is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Because the unit is self-powered there is no need to run wires for power. Installation time can be as little as a few minutes. The infrared sensing terminals can be mounted up to 300 feet apart and will send a signal back to the DCR-2500 receiver up to half mile away* anytime someone passes between the sensors.

The break beam sensor is a point to point sensor and will not be activated by any motion outside of the monitored beam. The sensors are not affected by small objects such as falling leaves or birds. It can be mounted high enough to avoid dogs and other animals but it will detect any intruder walking through the beam area. The beam sensor is ideal for outdoor applications such as storage lots, lumber yards, car dealerships, etc. Multiple sensor pairs can be used to send a signal to one receiver if you wish to set up a perimeter.

Operating Range: -30°F to 120°F

6. AFL ADHESIVE -AFL #S008720: RIBBON FORMING 4OZ, FAA-03, ONLY




7. SLEEVE –CESI # 680X640: 40MM RIBBON (50/PKG), #PS-99-X40C, ONLY

8. 3M SPLICE CASE-2178LL: X-LARGE FIBER, 3M, ONLY

3M™ Fiber Optic Splice Closure 2178-LL/FR3M ID 80611008865 UPC# 00051138708429 Part Number 2178-LL/FR

3M™ Fiber Optic Splice Closure 2178-XL is designed to meet all common needs and field conditions. The unique strength of the member clamp assembly avoids cable sheath movement with temperature changes. This flame-retardant closure is ideal for wall-mount, aerial strand-mount, pedestal, underground and pole-mount applications.

3M™ Fiber Optic Splice Closure 2178-XL is made with a highly chemical-resistant material, enabling use use in buried, underground and aerial applications. This closure is easy to install, easy to use and easy to re-enter. It provides a separate area for routing, protecting and expressing buffer tubes and ribbon fibers.

Multi-port grommets offer entry for drops or cables Easy to install, easy to use and easy to re-enter Designed for aerial strand-mount, buried, pedestal and underground applications




Measures 21.9 in x 8.5 in x 11.3 in Includes tray support, gasket, air valve, bolts and cable strain relief, 6 sealing washer trees, 2 plugs, 4

cable ties, 1 sheath scuff, 3 hose clamps, 3 K-connectors and more Maximum capacity of 288 single-fusion and 864 mass-fusion splices Made of chemical-resistant material Watertight seal Comes with 3 cable entry kits and 2 ground lugs Designed for inline and butt splicing configurations

9. 3M BRACKET KIT- 3M 2197: AERIAL HANGER, ONLY

3M™ Aerial Hanger Bracket Kit 21973M ID 80610756100 UPC# 00054007922223 Part Number 2197

3M™ Aerial Hanger Bracket Kit incorporates all necessary hardware for aerial installation of a 3M™ Fiber Optic Splice Closure 2178. The bracket is made of stainless-steel material for additional durability.

3M™ Aerial Hanger Bracket Kit comes with an adjustable aerial hanger bracket that is ideal for use with 3M Fiber Optic Splice Closure 2178 Series. This bracket can also be used with closures that have 1- or 2-cable addition kits. The kit provides additional hardware to attach the splice closure cover to the bracket base and includes 6 corner inserts, 12 nuts, 2 flexible hinges, 2 "L" brackets, 2 bonding/hanger brackets and 2 bolts with washers.

1) Includes required hardware for aerial installation2) Comes with tools to attach the splice closure cover to bracket base3) Suitable for use with 3M™ Fiber Optic Splice Closures 2178-S, 2178-SL, 2178-LS and 2178-LL

Series4) Accommodates 2178 splice closures with 1 or two 2181 cable addition kits5) Bracket has stainless-steel construction for additional durability6) Includes 6 corner inserts, 12 nuts, 2 flexible hinges, 2 "L" brackets, 2 bonding/hanger brackets

and 2 bolts with washers7) 1/pack

10. 3M SPLICE CASE - 3M 2181: SPLICE CASE L/S EXPANSION KIT, ONLY

3M™ Cable Addition Kit 2181-LS/FR, Fire Retardant3M ID 80611012859 UPC# 00051138754143 Part Number 2181-LS/FR

3M™ Cable Addition Kit is designed for the fire retardant 3M™ Fiber Optic Splice Closure 2178-LS. The kit includes 3 cable entry hardware kits, a gasket and materials for installing additional cables.

1) Compatible with 3M™ Fiber Optic Splice Closure 2178-LS/FR




2) Includes gasket and materials for installing additional cables3) Flame retardant4) 1 kit/pack

SECTION B: COMMUNICATIONS SUPPLIES BRAND EQUIVALENTS

11. BULK HEAD, FIBER ST SINGLEMODE- MULTILINK MST-06-C-BLK-#99234K

12. BULK HEAD FIBER LC - MULTI LINK - MLCD-12-SM-C-BLK :




13. RIBBON FIBER PROTECTOR, Multi- Link #065-383-10

14. FANOUT KIT FIBER LC TO RIBBON, CESI# GT-SM12RRN924LCUOED0-002 FIBER PIGTAILS- LCFEATURES-100% End-face geometric specification controlled -Customer special assemblies available- Telcordia GR-326-CORE Standard - Low insertion loss and back reflection loss -Good Exchangeability -Good durability -High temperature stability




SPECIFICATIONSSingle mode Multimode

Insertion Loss ≤0.50 dB max (PC)≤0.50 dB max (UPC)≤0.50 dB max (APC)

≤0.20 dB (PC)

Return Loss ≥45 dB (PC)≥55 dB (UPC)≥65 dB (APC)

Interchangeability ≤0.20 dB (Connect Randomly)Tensile Strength 0-15kgVibration ≤0.20 dB (5-50Hz,1.55mm Amplitude)Operating Temperature -40 to +80 ℃

14. CESI FANOUT KIT FIBER LC TO RIBBON- CESI# GT-SM12RRN924LCUOED0-002 FIBER PIGTAILS- LC (cont’d)GEOMETRIC SPECIFICATION OF FINISHED END-FACE

PC CONNECTOR APC CONNECTORRadius of Curvature 10-25 mm 5-15 mmApex Offset ≤50 um ≤100 umFiber Spherical Height -90 nm,+50 nmAngular Offset 8±0.5 ℃

ODERING OPTIONSEnd-face Finishing PC,UPC,APCFiber Mode SM9/125um: G652Dhttp://www.oemarket.com/product_info.php?

products_id=145 MM :62.5/125um or 50/125um

Cord Diameter 0.9mm,2.0mm,3.0mmCable Length CustomizedFiber count Duplex(2),4,6,8 & 12 fibers


http://www.oemarket.com/product_info.php?products_id=145

http://www.oemarket.com/product_info.php?products_id=145



15. CESI FANOUT KIT FIBER ST TO RIBBON, CESI# GT-SM12RRN924STUOED0-002FIBER OPTIC PATCH CORDSM, 12 Fiber, Ribbon Riser Non-Armored, 900um 24" Legs(color coded), Flat Fan-Out Kit, ST-UPC to

Blunt, No Pull Eye, 2 meter




15. CESI FANOUT KIT FIBER ST TO RIBBON, CESI# GT-SM12RRN924STUOED0-002 (cont’d)




16. CESI H-BRACKET, W/LARGE HOOKS, CESI# CESLIVE CPFI-HBRK-LHCPFI-HBRKS-LH: Made out of T6061 High Quality Aluminum for Light Weight and yet very strong. Adjustable hooks for varying size of wire coils.


Documents

RFP # 6163 · Web viewIncludes tray support, gasket, air valve, bolts and cable strain relief, 6 sealing washer trees, 2 plugs, 4 cable ties, 1 sheath scuff, 3 hose clamps, 3 K-connectors