KIMMU INDUSTRIES SDNBHD

Size 610mm W X 2200mm L X 0.35mm thkRaw Materials GalvanisedPacking 500 sheets/pallet

Rib Lath

Description

Expanded Galvd Rib Lath is Expanded Metal lath stiffened bylongitudinal steel ribs, formed in the same sheet of metal. The mesh areasof the lath are expanded by cutting and stretching in the sheet of metal,the ribs being simultaneously roll-formed. The furring design of the meshprovides an excellent background plaster for construction of partitions,suspended ceilings and refurbishment works. The advantages of rib lathover metal lath is that the support centres can be increased or widened.

Applications:Galvd Rib-Lath is extensively used:

As a Plaster Background for:– Partitions– Structural (Steel Work Encasement)– Suspended Ceiling– Arch Formation– Construction Joint for ShallowTo refurbish damaged or aged masonry walls, Slab, Retrofiting work, etc.

Installation:

Galvd Rib-Lath must fixed with the apexes of the ribs in contact with thesupport or the backing.Galvd Rib-Lath should be lapped at the sides wire tied at intervals notexceeding 150mm.At the end of the sheets, the Galvd Rib-Lath should be overlapped with atleast 100mm (4″ ).

Hy Rib

Description

Hy-Rib is an expanded metal sheet product, specifically developed for useas permanent formwork to concrete. The profile of the open mesh, incombination with the Hy-Rib tangs, allow the development of denseconcrete nodules and indents on the face of the Hy-Rib, forming anenhanced mechanical key for the second phase pour. In the case ofvisible elements, the resulting Hy-Rib surface is suitable to receive arendered or tiled finish.

Hy-Rib is primarily used in construction joint applications but it is alsoused to form wall, beam & column surfaces and slabs soffits, where theformed surface will not be seen. For over 80 years Hy-Rib has beensuccessfully used as permanent formwork on innumerable building &infrastructure projects, throughout the world.

1 of 15

Hy-Rib has an enviable portfolio of technical data. Independent bodieshave undertaken full scale testing programmes to determine and verifyHy-Rib’s effectiveness in forming construction joints. The result is aproduct with well defined engineering properties, established formworkpressure characteristics and measured improvements to the jointperformance. Hy-Rib is certified for use as permanent formwork by theBritish Board of Agrément (BBA).

The products is hot-dipped galvanized steel sheets. Because its meshesand U patterns, it has better anti-stress capability and forming flexibilitythan normal metal lath. This product has excellent engineering quality,construction joint security and widely used in tunnels bridges, valvebasement systems, sewage systems, subways, retaining walls, nuclearpower plants, shipyards, water pools and marine engineering works andhigh rise building projects and non-regular or bending pattern etc.asconcrete permanent assembly-free formwork.

REASONS TO USE HY-RIB

1. Reduced risk of Hand & Arm vibration injury (white finger): productfeatured in HSE document – Vibration Solutions Ref HS (G) 170

2. When Hy-Rib is used as vertical formwork, the resulting formworkpressure is significantly less than that developed with traditionalforming materials, reducing the overall support requirement.

3. Hy-Rib joint surfaces require minimal preparation prior to the nextpour, with the exception of the rebar cover zones. It minimises thelabour, mess and disposal requirements associated with scabbling,chemical retarders and jet washing.

4. A correctly formed Hy-Rib joint outperforms traditionally preparedjoints in shear and bond.

5. Hy-Rib reduces the risk of trapped air and voids within the concrete.6. The range of narrower sheet widths improves site productivity and

minimises wastage.7. Hy-Rib is a proven construction product with comprehensive

technical data, manufactured by an established UK company.

HDPE (Polythylene) Pipe

Description

High Density Polyethylene Pipe (HDPE) is a thermoplastic pipe madefrom material that can be melted and reformed. It is rugged, flexible, anddurable. It has outstanding chemical and environmental stress crackresistance.

Relative to existing infrastructure, like ductile iron, concrete or PVC,HDPE seems like a new product. In reality, it has been successfully usedin a wide variety of piping applications for over 50 years.

The outstanding physical and performance benefits of HDPE pipe make itthe perfect choice for your piping systems.

Size 1.8m x 5.1mModel A Whole Green (Mix Material)Model B White Label (New Material)

Building Safety Net

2 of 15

Description

Building Safety Net is made from high density polyethylene(HDPE). Weshould use high technics to draw the wire first, then weave the wire inspecific way. After weaved, we add rope and tether on the side of thenetting. There are also burning-resist components in the plastic saftypurse netting it can avoid occuring unexpected fire.

Usage:

To protect the workers who works on the top of the building.To prevent person or stone dropping on the earth directly.To keep the field clean.

Lattice Girders

Description

A lattice girder is a type of girder with a criss-crossed web design, suchas in gardening lattices, between the two edges of the girder.

It is manufactured using high strength steel wire which provides rigidity tothe panel and enables it to bind easily with in-situ concrete which ispoured later on site.

They are lightweight and can be easily assembled on uneven floor andwall surfaces with few workers.

Gabion & Mattress

Description

Gabion

3 of 15

Gabion boxes are made of heavy duty hexagonal wire nettingsFinish can be hot-dipped galvanized, galvanized aluminum alloy or PVCcoatedFilled with rock or rubble to economically and effectively construct earthretaining walls and erosion control structures

Mattress

Gabion Mattresses are used for permanent erosion control in channels,stream banks, spillways and stable slopes from surficial erosion. Thestone confinement within the units allows for higher shear stressresistance than riprap. Made of PVC coated galvanized wire, gabionmattresses are divided into compartments and filled with stones at theproject site. With lids closed, the gabion mattresses form flexible,permeable, monolithic structures. Considered a robust alternative to rip-rap, gabion mattresses offer long term performance against aggressiveflow conditions and do not rely on vegetation for their hydraulicperformance.

Advantages of Gabion Mattresses:

Environmental FriendlyEasily AssembledPermeabilityThe lid is supplied as a separate panel

Extruded Polystyrene Foam (XPS)

Description

EXTRUDED POLYSTYRENE FOAM is a Hard Type extruded polystyrenethermal insulating products made of polystyrene combining with additivesusing extrusion method.

The board possesses a continuous and even external layer andcompletely closed honey-comb cells structure achieved during thecontinuous extrusion process.

The board is an excellent thermal insulating material with highcompression strength, low coefficient of thermal conductivity, low waterabsorption rate, low vapour permeance, long life because of its uniformwall thickness of linked honey-comb structure and without any gap. Thecharacteristics are the quality of an excellent thermal insulating materials.

The excellent performances of thermal insulation, high compression,water proofing make the board to be superior to conventional thermalinsulating material, and suitable for use in new building or retrofit works.

Product SpecificationDensity (kg/m³) ASTM 1622 : 36 to 50Compression Strength (kpa) ASTM 1621 : > 350Water Absorption % (v/v) ASTM C272 : > 0.1Thermal Conductivity W/mk ASTM C518 : > 0.028Diamensional Stability % : > 2.0Colour : Blue or PinkSize : Length (mm) : 1200mmWidth (mm) : 600mmThickness (mm) : 25mm and 50mm

Benefits and Features

Added Efficiency and ComfortExcellent Resistance to Moisture

4 of 15

Applications

PRMA (Roofing Applications)Cold StorageExterior Wall InsulationCivil Construction

Roofing Nails

Description

Plastic cap roofing nails can hold the materials in their place, so they canbe used in the high-wind areas. And they mainly used to fasten materialssuch as the base sheet, vapor barrier, underlayment or soundproofmaterials.

1. Hold the roof-covering materials in their place.2. Against the moisture intrusion.3. Reduce the heat sinking effect of metal to the building materials.

5 of 15

Coil Nails

Common Nails

Description

Remarks:* Used mainly for building construction, packing, furniture, … etc.* Nails will be polished.* Buyer’s requirements and specifications can be met.

6 of 15

Steel Fibers

Description

Steel fibers have been used to reinforce concrete for over 100 yearssince the first patent was applied for in 1874. Introducing fibers into theconcrete provides new and improved mechanical properties; the fibers aredistributed in three-dimensions throughout the concrete providingperformance precisely where it is needed.

Steel fibers today offer the designer and constructor state-of-the-arttechnology for use as reinforcement in many concrete elements andapplications. There are many varieties of styles, shapes and sizes of steelfibers in the market today.

Introducing steel fibers into the concrete mix provide new mechanicalproperties. We now have a new material, with improved mechanicalproperties that can enhance structural applications. The fibers can beincluded as a substitute for the common steel reinforcement, or as acomplement, or for a better performance for strain that the commonreinforcement can’t absorb.

In mechanical and performance terms, by adding steel fibers to theconcrete mix you can:

Increase and get a stable of tensile strength under flexion load, whichproduces a ductile behaviorIncrease impact resistanceIncrease cyclic loads of resistance (fatigue effect)Increase prevention of the plastic shrinkage crackIncrease the concrete performance against thermal variationsGet minor permeability

Steel fibers come in carton boxes of 20 kg for easy handling, or inlarge bags 600kg – 1100kg to use with our dosage machine services.

Application:

TunnelingIndustrial flooringAirport pavementsPrecastPre-compressed concreteSlab on Piles (SOP)

Steel Bar

Description

A rebar (short for reinforcing bar), also known as reinforcing steel,reinforcement steel, rerod, a deformed bar, reo, or reo bar, is a commonsteel bar, and is commonly used as a tensioning device in reinforcedconcrete and reinforced masonry structures holding the concrete incompression. It is usually formed from carbon steel, and is given ridges forbetter mechanical anchoring into the concrete.

Metric bar designations represent the nominal bar diameter in millimetres.Bars in Europe will be specified to comply with the standard EN 10080(awaiting introduction as of early 2007), although various nationalstandards still remain in force (e.g. BS 4449 in the United Kingdom).

7 of 15

Materials Cold Rolling Steel, Hot Rolling SteelDiameter 5 – 12mmMaximum Bending Angle (degree) 180Longest Stirrup edge 2000mmShortest Stirrup edge 100mmLength Accuracy (mm) ±1Bending Precision (degree) ±1

Rebar Stirrups (Cut & Bend)

Description

Stirrup reinforcing is a major factor in adding strength to concrete supportcolumns. Though concrete is strong by itself, it’s even stronger with steelbars running through its length. To ensure that this composite material isas strong as possible, engineers use stirrups, also made of steel, to keepeverything straight and in order when the mixed concrete is poured.

AssemblyStirrups are separate from one another. Rebar is placed into the basewhere the concrete will be poured. The stirrups, which are little more thansquare bands, are placed around the steel rebar at regular intervals tostrap them tightly into a given shape. This forms a skeletal square orrectangular column inside the mold. The concrete is poured over theskeleton, embedding it inside the column.

ResistanceThe stirrups provide resistance, which is more specific than strength. Theconcrete and the rebar are supporting the load coming down on thecolumn from above. The stirrups act like tendons, keeping things togetherwhen there’s pressure and flexing. Though not essential, the stirrups aredefinitely helpful. They’re also used in beams, which are laid horizontallyrather than vertically as columns are.

Material Low Carbon Mild Steel WireApplication

Mesh fabrication, Nails Manufacturing, Racks, GI wire andmore.

Diameter Size (mm) 1. 60 – 11. 00mmPacking 100-1000kgTensile Strength 450N / mm2 and above

Hard Drawn Wire

Description

Hard-drawn wire is the most basic and affordable steel wire available.The term “hard-drawn” simple means the steel has been drawn though thedie to the desired diameter with no additional processing or tempering.Hard drawn wire is most commonly used in shelving, automobile parts,and shopping carts.

COMMON USES FOR HARD-DRAWN WIRE

One of the most versatile steel wires, hard-drawn wire is suited to a widerange of applications for manufacturing. These include:

Automobile partsShopping cartsBasketsShelvingHooksSafety pinsWasher springsOverhead transmission wire…and many others

8 of 15

Black Anneal Wire

Description

Material and technicalWe produce the annealed wire with high-quality low carbon raw materialsthrough wire drawing, anneal process.

Its soft and has good stretching resistance. The finished products aresmeared with slushing oil. So they are not apt to rust.

Specification and UsageStandard specification: Wire diameter from 1.6mm-5.0mm

Main purposesBuilding and fire organizations for black fiber cloth such as silk and silk tiemade from high-quality wire, primarily for the construction industry and fortying silk tie lines.

PackingWe can tie up the products according to customers requirements, rangedfrom1 to 500 kg each bundle.

Serial productsU type carbon steel wire, and staight cut wire is mainly used as tie wire orbinding wire in construction.

Ref. No 610, 65, 66Wire Diameter (mm) 2.00-2.50, 3.30-4.50, 2.60-3.20Width (m) 1.80-2.00Length (m) 20-60

Wire Mesh Roll

Description

Solid rolled format to provide exceptionally strong reinforcement for yourconstruction needs.

*Any kind of specification are decided by customer’s requirement (Cut-to-Size available).

Welded Wire Mesh (Roll)

Description

Materials: High quality low carbon steel wire.stainless steel wire.

Welded Characteristics: Including galvanized after welded, galvanizedbefore welded;

Used: Used widly in industry, agriculture,building, transportation, minefield, lawn, cultivation, etc, professional guard, decorate, machineprotection etc.

Galvanised Wire Mesh

9 of 15

Description

This type of mesh wire is generally made up of plain steel wire. At the timeof processing it goes through a hot zinc covering process. This type ofwelded mesh ware with square opening is ideal for animal cagestructuring, fabricating the wire boxes, grilling, partition making, gratingpurposes and machine protection fencing.

BRC Wire Mesh

Description

BRC Wire Mesh is a steel reinforcement material in concrete. The meshis used for replacing the traditional “cut & bend” and placing of steelthermo-mechanical treated bars. The mesh is an electric fusion weldedprefabricated reinforcement consisting of a series of parallel longitudinalwires with accurate spacing welded to cross wires at the required spacing.Machines are used to produce the mesh with precise dimensional control.The product results in considerable savings in time, labour and money.

Uses of Welded Wire MeshThe welded wire mesh is a metal screen that is made up of low carbonsteel wire or stainless steel wire. It is available in various sizes andshapes. It is widely used in agricultural, industrial, transportation,horticultural and food procuring sectors. It is also used in mines,gardening, machine protection and other decorations.

Mesh Spacing (mm) 50 (Vertical) x 200 (Horizontal)Wire Diameter (mm)

Ø6.0(Double Main Wire), Ø5.0(Cross Wire)Panel Size (Height x Length) (mm)

900 X 2400 1200 X 2400, 1500 X 2400, 1800 X 2400, 2100 X2400, 2400 X 2400

Post Specification (mm)ULTRAGAL POST Ø60 (GALVANIZED U-CLIP & M8 Bolt,

Nuts)

Double Wire Fencing

Description

Extremely strong and durableLong service lifeDouble horizontal wiresThe quality is the result of high grade raw materials and meticulousprocessing

10 of 15

Extremely high resistance to vandalism combined with excellent visibilitythrough the fenceA long service life with little or no maintenance required is its best feature

1. Available in Hot-Dip Galvanized , Galfan Wire , Heavily GalvanizedWire & Powder Coating.

2. Any Custom-Made Order is Available in our Factory (MinimumOrder Quantity may be applied).

Mesh Spacing (mm) 50 (Vertical) x 200 (Horizontal)Wire Diameter (mm) Ø5.0Panel Size (Height x Length) (mm)

900 X 2400, 1200 X 2400, 1500 X 2400, 1800 X 2400, 2100X 2400, 2400 X 2400

Post Specification (mm)ULTRAGAL POST Ø60 (GALVANIZED U-CLIP & M8 Bolt,

Nuts)

3D (V-Press) Fencing

Description

Available in Hot-Dip Galvanized, Galfan Wire, Heavily Galvanized Wire &Powder Coating.Any Custom-Made Order is Available in our Factory (Minimum OrderQuantity may be applied).

Chain Link Fencing

Description

A chain-link fence (also referred to as wire netting, chain-wire fence,cyclone fence or hurricane fence) is a type of woven fence usuallymade from galvanized PVC-coated steel wire. The wires run vertically andare bent into a zig-zag pattern so that each “zig” hooks with the wireimmediately on one side and each “zag” with the wire immediately on theother. This forms the characteristic diamond pattern seen in this type offence.

11 of 15

12 of 15

FA SERIES (Mesh Spacing) (mm)50 (Vertical) x 150 (Horizontal)

FB SERIES (Mesh Spacing) (mm)75 (Vertical) x 300 (Horizontal)

Wire Diameter Ø5.0 , Ø6.0Panel Size (Height x Length) (mm)

900 X 2400, 1200 X 2400, 1500 X 2400, 1800 X 2400, 2100X 2400, 2400 X 2400

Post Specification (mm)ULTRAGAL POST Ø60 (GALVANIZED U-CLIP & M8 Bolt,

Nuts)

BRC Fencing

Description

A unique rolled beam section at the top and bottom of the fence providinga user friendly surface, no sharp or raw edges.

It has been widely used in public and private properties areas whichincludes: car parks, park’s fence, schools, playground, pedestrian zone.It’s an open mesh system that allow excellent visibility making it widelypopular among communities.

Post & ClampsRound post is popular used with the roll top fence. Using a strong screwwith two U shape clip fix the fence panels with the post.

Installation Way

The post can be 40-50cm longer than the panels to fix the post dip underthe ground. Or welding a steel plate with holes, to fix it to the ground byscrews.

1. Normal welded wire mesh with special edge treatment. Foldingedge avoids hurt people by the tip of wire.

2. Suitable for garden beautification, housing estate development,airport, school and etc.

Available in Hot-Dip Galvanized, Galfan Wire, Heavily Galvanized Wire &Powder Coating.Any Custom-Made Order is Available in our Factory (Minimum OrderQuantity may be applied).

Mesh Spacing (mm) 12.5/25 (Vertical) , 75 (Horizontal)Wire Diameter (mm) Ø4.0Panel Size(Height x Length) (mm)

900x2400 , 1200x2400 , 1500x2400 , 1800x2400 ,2100x2400 , 2400x2400 , 2700x2400 , 3000x2400

Post Specification (mm)OPTION A: SHS POST 50 X 50, OPTION B: SHS POST 65

X 65, OPTION C: RHS POST 50 X 75, C/W FLAT BARFITTING, CARRIAGE BOLT & NUT

Anti-Climb Fencing

Description

A unique perimeter security product that maintains a guarded display ofvisual screening balancing the need to delay and deter an attack.

Anti-Climb Fencing combines a mesh that discourages cutting andclimbing with framework that can support a total security platform.

The distinguishing feature of KIMMU® Anti-Climb is the very tightconstruction of its anti-scale and anti-cutting welded wire mesh. It’s verydifficult to get hand/footholds on this fence and the cutting implements

13 of 15

required to sever its welded heavy steel wire just can’t fit into the minimalspaces of the mesh.

Available in Hot-Dip Galvanized , Galfan Wire , Heavily Galvanized Wire& Powder Coating.Any Custom-Made Order is Available in our Factory (Minimum OrderQuantity may be applied).

Size (SWG) 11, 12Diameter (mm) 2.70, 2.50Barb spacing 4 inchesWeight/ Coil (KG) 5 to 10

PVC Barbed Wire

Description

Barbed wire, also known as barb wire, is a type of fencing wireconstructed with sharp edges or points arranged at intervals along thestrand(s). It is used to construct inexpensive fences and is used atop wallssurrounding secured property. It is also a major feature of the fortificationsin trench warfare.A person or animal trying to pass through or over barbed wire will sufferdiscomfort and possibly injury. Barbed wire fencing requires only fenceposts, wire, and fixing devices such as staples. It is simple to constructand quick to erect, even by an unskilled person.

• Made of galvanized steel wire. PVC cooled or partial PVC coated ironwire in green and other colors.• Generally used to enforce security barrier to protect grass boundary,railway, highway and etc .

Size (SWG) 11, 12, 13, 14, 15Diameter (mm) 2.70, 2.50, 2.30, 2.00, 1.80Barb spacing 4 inchesWeight/Coil (KG) 5 to 10

Galvanized Barbed Wire

Description

Barbed wire, also known as barb wire, is a type of fencing wireconstructed with sharp edges or points arranged at intervals along thestrand(s). It is used to construct inexpensive fences and is used atop wallssurrounding secured property. It is also a major feature of the fortificationsin trench warfare.A person or animal trying to pass through or over barbed wire will sufferdiscomfort and possibly injury. Barbed wire fencing requires only fenceposts, wire, and fixing devices such as staples. It is simple to constructand quick to erect, even by an unskilled person.

• Made of galvanized steel wire. PVC cooled or partial PVC coated ironwire in green and other colors.• Generally used to enforce security barrier to protect grass boundary,railway, highway and etc .

14 of 15

Razor Barbed Wire

Description

We can produce razor type barbed wire in concertina coils of differentblade types and specifications. Special specifications for concertina coilsor straight type razor wire are available on request.

Tel 07-432 3311Fax 07-432 1133E-Mail enquiry@kimmu.com.myWebsite www.kimmu.com.my

KIMMU INDUSTRIES SDN BHD

TL 60, Batu 2, Jalan Minyak Beku, 83000, Batu Pahat, Johor, Malaysia

15 of 15