Ride-On IS® 5100Z Ferris_2014.pdf · Spindles Hercules™ Cast-iron Greasable SUSPENSION & DRIVE TRAIN Suspension 4-wheel independent Transmission Hydro-Gear® Pumps with remote

ENGINE

Horsepower (HP) / Make 33.5 HP* Caterpillar Diesel

Power Take Off (PTO) Electric

Cylinders 3

Starting Electric

Fuel Capacity 56.8L

DECK

Cutting Width 183cm (72”), 155cm (61”) side or rear

Cutting Height 3.8 - 15.2cm (1.5 - 6”)

Deck Construction iCD™ Cutting System; Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners

Spindles Hercules™ Cast-iron Greasable

SUSPENSION & DRIVE TRAIN

Suspension 4-wheel independent

Transmission Hydro-Gear® Pumps with remote oil cooler and Wheel Motors

Drive Axles 3.2cm (1.25”) Tapered

Drive Tyres 26 x 12” x 12”

Caster Tyres 13 x 6.5”

CONSUMER SELLING POINTS

Fully Independant Suspension with dual rear A-arms for speed, comfort, longevity and leading cut quality

Reknowned Caterpillar™ Diesel Engine Power and Longevity

Hydraulic Deck Lift for ease of use

Cup holder, mobile phone pocket, 12-volt outlet and storage compartment

TECHNICAL SELLING POINTS

Hercules™ Spindles, 10 1/4” cast iron housing, 1 1/4” shaft, fully greasable tapered roller bearings, grease pressure relief valve

New models have revised Transmission oil cooler and wheel motors for cooler running

Oversize pulleys on the iCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection

Dual A section transmission drive belts for longevity

Ride-On IS® 5100Z

Product Guide - Dealer Version 2014

GROUND SPEED

Speeds-fwd. 0-19.3 km/h

Speeds-rev. 0-9.5 km/h

DIMENSIONS

Overall Length 221cm

Overall Width (Deflector up) 188cm (72”) /161cm (61”)

Dry Weight 1006 kgs

COMFORT & SAFETY

Seat Package Premium High Back

Rollover Protection Standard

Instrumentation Fuel level gauge in tank, Visual water temperature gauge, Hour meter

Controls / Safety Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit

Parking Brake / Safety Circuit Disc

OPTIONAL EXTRAS

Trailer hitch kit, Mulch kit, Flat-free caster tyre

WARRANTY†

Engine 2 Year Manufacturer’s Warranty (Commercial Use)

Transmission 2 Year Manufacturer’s Warranty

Balance of Machine 2+2 Warranty - 2 Year Commercial Use, additional 2 years (or 500 hours for Non-Commercial Use), front-to-rear, parts & labour excluding belts, blades, tyres and brake pads

† Terms and conditions apply. See owners manual or ferrisindustries.com for details. * Power levels rated by engine manufacturer.


ENGINE

Horsepower (HP) / Make 36 HP* Vanguard


Cylinders V-Twin

Starting Electric

Fuel Capacity 42L

DECK

Cutting Width 183cm (72”), 155cm (61”) side discharge


Deck Construction iCD™ Cutting System; 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners

Spindles Hercules™ Cast-iron Greasable



Transmission Hydro-Gear® Pumps with remote oil cooler and Wheel Motors


Drive Tyres 24 x 12” x 12”



Fully Independant Suspension with dual rear A-arms for speed, comfort, longevity and leading cut quality

Choice of 36HP* Vanguard™ V-Twin power Made in Japan or 30HP† Commercial Turf™ with cyclonic air filter

Cup holder, storage compartment and visible fuel gauge

Increased cutting speed to maximise efficiency


Hercules™ Spindles, 10 1/4” cast iron housing, 1 1/4” shaft, fully greasable tapered roller bearings, grease pressure relief valve

New models have revised Transmission oil cooler and wheel motors for cooler running



Ride-On IS® 3100Z


GROUND SPEED


Speeds-rev. 0-9.5 km/h

DIMENSIONS


Overall Width (Deflector up) 188cm (72”) /161cm (61”)

Dry Weight 635 kgs

COMFORT & SAFETY

Seat Package Premium High Back


Instrumentation Fuel level gauge in tank, Hour meter



OPTIONAL EXTRAS

Trailer hitch kit, Grass Collector, Mulch kit, Flat-free caster tyre, Light Kit

WARRANTY†






ENGINE

Horsepower (HP) / Make 24 HP* Yanmar Diesel


Cylinders 3

Starting Electric

Fuel Capacity 42L

DECK

Cutting Width 155cm (61”) side discharge, 132cm (52”) side or rear



Spindles Cast Iron Greasable on 61”, Heavy Cast-Aluminium Greasable on 52”



Transmission Hydro-Gear® Pumps with remote oil cooler and Hydro-Gear® Wheel Motors


Drive Tyres 22 x 11 x 10” (61”), 22 x 10 x 10” (52”)

Caster Tyres 13 x 5”


Fully Independant Suspension system for speed, comfort, longevity and leading cut quality

Rugged Reliable Yanmar Diesel power, longevity and refinement


iCD™ cutting deck is mounted to each suspension arm for speed and quality of cut


61” model has heavy duty 8” cast iron housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve

Transmission oil cooler and wheel motors for cooler running



Ride-On IS® 2500Z


GROUND SPEED

Speeds-fwd. 0-16 km/h

Speeds-rev. 0-8 km/h

DIMENSIONS


Overall Width (Deflector up) 161cm (61”)/ 138cm (52”)

Dry Weight 718 kgs

COMFORT & SAFETY

Seat Package Premium


Instrumentation Fuel level gauge in tank, Visual water temperature gauge, Hour meter



OPTIONAL EXTRAS


WARRANTY†






ENGINE

Horsepower (HP) / Make 27 HP* Commercial Turf™ (52”) or 32 HP† (61”) Vanguard


Cylinders V-Twin

Starting Electric

Fuel Capacity 42L

DECK




Spindles Cast Iron Greasable on 61”, Heavy Cast-Aluminium Greasable on 52”



Transmission Hydro-Gear® Integrated ZT5400 Commercial Transmissions


Drive Tyres 22 x 11 x 10” (61”), 22 x 10 x 10” (52”)



Fully Independant Suspension system for speed, comfort, longevity and leading cut quality

Cyclonic Filter in-built into the proven Commercial Turf™ V-Twin


iCD™ cutting deck is mounted to each suspension arm for speed and quality of cut



Commercial Grade Hydrogear® ZT5400 Integrated transmissions, eliminates the need for hydraulic hoses


Ride-On IS® 2100Z

Similar to model shown.


GROUND SPEED



DIMENSIONS



Dry Weight 544 kgs

COMFORT & SAFETY






OPTIONAL EXTRAS


WARRANTY†






ENGINE

Horsepower (HP) / Make 23 HP* Kawasaki FS Series OR 27 HP† Commercial Turf™


Cylinders V-Twin

Starting Electric

Fuel Capacity 21L

DECK

Cutting Width 132cm (52”) side discharge



Spindles Heavy Cast-Aluminium Greasable


Suspension Active Performance Suspension



Drive Tyres 22 x 11 x 10”



Patented Suspension Technology for speed, comfort, longevity and improved cut quality

Choice of Proven Commercial Turf™ or Kawasaki™ V-Twin Power


iCD™ cutting deck is mounted to the rear suspension arms for speed and quality of cut


Heavy duty cast aluminium thick walled housing, 1” shaft, fully greasable bearings with debris shields, grease pressure relief valve



Ride-On IS® 700Z


GROUND SPEED



DIMENSIONS


Overall Width (Deflector up) 138cm (52”)

Dry Weight 480 kgs

COMFORT & SAFETY

Seat Package Contour





OPTIONAL EXTRAS


WARRANTY†






ENGINE

Horsepower (HP) / Make 25 HP* Commercial Turf™


Cylinders V-Twin

Starting Electric

Fuel Capacity 21L

DECK



Deck Construction 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners, iCD™ Cut-ting System on 48”



Suspension Active Performance Suspension






Patented Suspension Technology for speed, comfort, longevity and improved cut quality



Cutting deck is mounted to the rear suspension arms for speed and quality of cut




Oversize pulleys on the cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection

Ride-On IS® 600Z


GROUND SPEED



DIMENSIONS



Dry Weight 433 kgs

COMFORT & SAFETY






OPTIONAL EXTRAS


WARRANTY†






ENGINE

Horsepower (HP) / Make 28 HP* Vanguard


Cylinders V-Twin

Starting Electric

Fuel Capacity 21L

DECK






Suspension Nil






Heavy duty 7 gauge chassis rails, wide chassis based on the IS3100, class leading value for money

28HP* Vanguard™ V-Twin power Made in Japan - 3YR Commercial Warranty


Replaceable oil filters and overflow reservoirs fitted to the Commercial Grade transmissions




Oversize pulleys on theiCD™ cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection

Ride-On F200XT®


GROUND SPEED



DIMENSIONS



Dry Weight 531 kgs

COMFORT & SAFETY






OPTIONAL EXTRAS


WARRANTY†






ENGINE

Horsepower (HP) / Make 25 HP* Commercial Turf™


Cylinders V-Twin

Starting Electric

Fuel Capacity 21L

DECK






Suspension Nil






Heavy duty 11 gauge chassis rails, class leading value for money








Ride-On F125XT®

Similar to model shown.


GROUND SPEED



DIMENSIONS



Dry Weight 517 kgs

COMFORT & SAFETY






OPTIONAL EXTRAS


WARRANTY†






ENGINE

Horsepower (HP) / Make 18.5 HP* Kawasaki FX Series (36”) OR 25 HP† Commercial Turf™ (44”, 48”)


Cylinders V-Twin

Starting Electric

Fuel Capacity 15L

DECK

Cutting Width 122cm (48”), 112cm (44”), 91cm (36”) side discharge


Deck Construction 10-gauge, fabricated double top deck, double reinforced side skirts, overlap welded corners



Suspension Nil



Drive Tyres 20 x 10 x 10” (48”), 20 x 8 x 10” (44”), 20 x 7 x 10” (36”)



Heavy duty 11 gauge chassis rails, vibration dempening floor pan, best value for money in class

Choice of Proven Commercial Turf Series™ or Kawasaki™ V-Twin Power






Oversize pulleys on the cutting deck for longer bearing life, better belt wrap increasing cutting power and bearing debris guards for protection

Ride-On F50XT®


GROUND SPEED



DIMENSIONS

Overall Length 175cm (36”) 185cm (44-48”)

Overall Width (Deflector up) 130cm (48”)/ 119cm (44”)/ 94cm (36”)

Dry Weight 328 kgs

COMFORT & SAFETY


Rollover Protection Not Available




OPTIONAL EXTRAS


WARRANTY†






Documents

Ride-On IS® 5100Z Ferris_2014.pdf · Spindles Hercules™ Cast-iron Greasable SUSPENSION & DRIVE TRAIN Suspension 4-wheel independent Transmission Hydro-Gear® Pumps with remote