Ride on TECHNICAL DATA/NOTES LAWN-TRACTOR Ride on TECHNICAL DATA/NOTES

Ride on

TECHNICAL DATA/NOTES

LAWN-TRACTORLAWN-TRACTOR

Ride on

TECHNICAL DATA/NOTES

Estate Pro 22 EBig combi lawn-tractor for gardens up to 8000 m². 122 cm cutting deck with twin collecting and mulching blades contrarotating .Grass-catcher capacity 320 litres .Hydrostatic transmission : forward and reverse.Electromagnetic clutch for easy blade engagement.Powerful twin cylinder 22 HP KOHLER engine.

8000

15x6.00-6 18x8.50-8

320

(7) 30/90

/

62

6

129/112/186

284

-Electromagnetic clutch for blades engagement.- Electronic dump of the grassbag.- Compartment for mobile telephone or a tin

22 HP COMMAND

Technical data

SPECIAL FEATURES

- Exclusive design of the bonnet, grassbag and dashboard.- Big reinforced grassbag (capacity 320 litres). - Acoustic device for full grass-catcher.- Multifunctional LCD desplay on dashboard.- Mulching kit available as standard.- 15” front wheels.- Floating cutting deck with new big antiscalp wheels.

Technical notes

Display with 6 diagnostic LED

GGP MODEL SHOWN

PCBPCBPPrinted rinted CCircuit ircuit BBoardoard

102/122102/122

… for all Estate 102/122cmEstate 102/122cm

Display with 6 diagnostic LED

When the key is turned to «ON», all the lights come on at the same time for about half a second (with a brief sound warning) to indicate that the machine is working properly.

Afterwards, when a warning light comes on, it indicates:

a) parking brake engaged;

b) missing grass-catcher or stone-guard;

c) blades engaged;

d) seat without operator;

e) transmission in “neutral” position.

f) steady = fault in battery charger (with engine running);

102/122102/122

Technical notes


AUDIBLE WARNING (BUZZERBUZZER)

There are two types of audible warning:

BUZZERBUZZER

a) continuous _the electronic card’s protection device has cut in;

_the engine has been off for more than 30 seconds with the key turned to «ON»;

b) intermittent _warning that the grass-catcher is full.

102/122102/122

Technical notes


Display with LCDLCD (Liquid Crystal Display)

102/122102/122

Technical notes



When you turn the key to «ON», all the icons appear at the same time for about half a second (with a brief sound warning) to indicate that the machine is working properly.

1.Hour counter. Indicates the total number of engine running hours.

The machine needs servicing after a certain number of hours.This is indicated by the display, which opens the “Hour counter” function and flashes for approx. 2 minutes, regardless of what functions are running.

102102

Technical notes

OPERATING FUNCTIONS for :

Estate Royal (TS18/102 Hydro)

Estate PRO 20 (TS20/102 Hydro

2. Voltmeter. Indicates the battery charge level.

3. Speed indicator. Indicates the engine’s rotation speed with a series of asterisks. The flashing light indicates that the engine’s rotation speed is not suitable for cutting grass.

102102

HI-Recharging LO-Recharging

Technical notes





5. Grass-catcher full light. Together with the intermittent sound warning, it indicates that the grass-catcher is full.

6. Reserve gauge = starts flashing when fuel is in reserve.

The reserve is approx. 2 litres of fuel, which is enough for 30-40 minutes of normal work.

102102

Technical notes





The following operating and auxiliary functions are valid for both DISPLAY as illustrated below :

102/122102/122

Technical notes


In addition to BASIC DISPLAY (for TM-102 18/20 H) operating functions there are also the following ones:

1. 24-hour clock You can change the time with the key turned to «ON» and the engine off, by following the steps described on Owner’s Manual.

The clock has a buffer battery.

122122

Technical notes


OPERATING FUNCTIONSfor :

Estate Royal E (TS18/102 Hydro)

Estate PRO 22 E (TS22/122 Hydro

1. press the «MODE» button several times to bring up the clock icon;

2. press the «MODE» button until the first two digits flash (hour);

3. press one of the side buttons (a – b) to increase or decrease by a unit;

4. press the «MODE» button until the other two digits flash (minutes);

5. press one of the side buttons to increase or decrease by a unit;

6. press «MODE» to complete your setting.

122122

Technical notes





2. Oil light. It signals an engine lubrication fault. Stop the engine immediately, check the oil level.

In addition to BASIC DISPLAY (for TM-102 18/20 H) auxiliary functions there are also the following ones:

122122

Technical notes





3. Level gauge = indicates the fuel level in the tank as follows:

from full to approx. half full

from half full to reserve in reserve

AUXILIARY FUNCTIONS for :

TM-122.22 H2 (TP 22/122 Hydro)

122122

Technical notes


Blade engagement with ELECTROMAGNETIC CLUTCHELECTROMAGNETIC CLUTCH

The mushroom switch (1) is for engaging the blades by an electromagnetic clutch:«A» Pressed = Blades disengaged«B» Pulled = Blades engaged

The “Blades engaged” condition is indicated

by a pilot lamp

102/122102/122

Technical notes


Blade engagement with ELECTROMAGNETIC CLUTCHELECTROMAGNETIC CLUTCH

On disengaging the blades, a brake is simultaneously activated which stops their rotation in few

seconds.

102/122102/122

Technical notes


Grass-catcher electrical tippingGrass-catcher electrical tipping

The grass-catcher may be emptied by pressing the pushbutton (A), keeping it pressed until the control motor stops.The grass-catcher returns to the working position by pressing the push-button (B), keeping it pressed until the pawl hooks into place and the control motor stops.

B

A

122122

Technical notes



Grass-catcher electrical tippingGrass-catcher electrical tipping

COMPONENTS OF THE GRASS-CATCHER ELECTRICAL TIPPING

122122

Technical notes



Tyres are of the «Tubeless» type;

We install 2 interchangeable kind of tires :

•CARLISLE•DELI TIRE

Front/Rear wheels

102/122102/122

Technical notes

Lawn-tractors Models 2008

Only for 18x8.50-8 Rear Tyres, there is a different tread (design).

DELI TIRECARLISLE

Front/Rear wheels

102/122102/122

Technical notes


Front/Rear wheels

Tyre pressure

FRONT 1.0 barREAR 1.2 bar

102/122102/122

Technical notes


Forward speed

Speed (at 3000 rpm):

in Forward drive ....... 0 ÷ 8.8 km/h

in Reverse ..............…. 0 ÷ 4.5 km/h

… for Hydrostatic Transmission modelsHydrostatic Transmission models102/122102/122

Technical notes

Forward speed

Speed (approximate) at 3000 rpm:

in 1ST ....……………… 2.2 km/hin 2ND ....……………… 3.8 km/hin 3RD ....……………… 5.8 km/hin 4TH ....……………… 6.4 km/hin 5TH ....……………… 9.7 km/h

in Reverse .................2.8 km/h

… for Gear Transmission modelsGear Transmission models 102/122102/122

Technical notes

Gear box releasing system

Position «A» =Drive engaged: for all operating conditions, when moving andduring cutting;

Position «B» =Drive released: considerably reduces the effort required for moving the machine manually, when the engine is not running.


GGP MODEL SHOWN

Technical notes

ENGINE OIL DRAIN

Follow the instructions in the engine booklet.

To empty the engine oil, unscrew the oil plug (1).

When refitting the plug, make sure the seal is positioned correctly.

MAINTENANCE

102/122102/122

Technical notes


MAINTENANCE

PAY, ATTENTION TO DRIVE PEDAL ADJUSTMENT!

Our WORKSHOP MANUAL develop this content

7


Technical notes

102/122102/122102/122 cm cutting deck with twin collecting blades

contrarotating for better collection of the grass.

Technical notes

102/122102/122

BLADES CONNECTION BELT

TIMING BELTTIMING BELTTechnical notes

102/122102/122

1

2

Use the specific tool (1) # Code 60205001/0 to check the piston (2) # Code 60208000/0 for the belt give values and the force applied, and use the stretcher until a give of 9 ÷ 10 mm is obtained, exerting a force of:

– 3.5 kg mod. 102,

– 4.2 kg mod. 122.

“TIMING BELT” adjustment ……..

Technical notes

MAINTENANCE

CHECKING BLADES ALIGNMENT.

Our WORKSHOP MANUAL develop this content

102/122102/122

Technical notes


MAINTENANCE

Our WORKSHOP MANUAL proposes a regular maintenance programme to the Customer to be carried out at prearranged intervals (for example, at the end of the summer or prior to a long period of inactivity).

102/122102/122

Technical notes

Garden CombiSmall combi rider for gardens up to 3000 m². 72 cm cutting deck placed under the seat with a collecting and mulchig blade.Grassbag capacity 170 litres.Gear transmission : 5 forward and rear.Manual blade engagement.12,5 HP Briggs and Stratton engine.

SPECIAL FEATURES

- Adjustable seat for a comfortable use of the machine.- New combination of yellow and grey colour. - New Stiga steering wheel.- Acoustic device for full grass-catcher.- Mulching kit as standard.

3000

11x4.00-415x6.00-6

170

/

(7) 30/80

71

/

1

/

/

80/103/168

185

/

/

B&S I/C OHV 12,5 HP

Technical data

Garden Combi HST

Small combi rider for gardens up to 3000 m². 72 cm cutting deck placed under the seat with a collecting and mulchig blade.Grassbag capacity 170 litres.Hydrostatic transmission: forward and rear . Manual blade engagement.12,5 HP Briggs and Stratton engine.

SPECIAL FEATURES

- Adjustable seat for a comfortable use of the machine.- New combination of yellow and grey colour. - New Stiga steering wheel.- Acoustic device for full grass-catcher.- Mulching kit as standard.

3000

11x4.00-415x6.00-6

170

/

(7) 30/80

71

/

1

/

/

80/103/168

193

/

/

B&S I/C OHV 12,5 HP

Technical data

Technical notes

Front/Rear wheels

Tyre pressure

FRONT 1.5 barREAR 1.0 bar


Technical notes

MAINTENANCE

The Instruction Handbook has a number of operations to be carried out by the Customer for a minimum ofbasic maintenance, and other operations not always within his capacity.


Technical notes

1. MACHINE1.1 Check of tight fixing and sharpness of blade 251.2 Blade replacement 1001.3 Check of the transmission belt 251.4 Transmission belt replacement 2) –1.5 Checking the blade drive belt 251.6 Blade drive belt replacement 2) –1.7 Check and adjustment of brake 101.8 Check and adjustment of drive 101.9 Check blade engagement and brake 101.10 Check of tight fixing of all the elements 251.11 General lubrication 3) 25

MAINTENANCE

2. ENGINE 1)

2.1 Engine oil change .....2.2 Check and cleaning of air filter .....2.3 Air filter replacement .....2.4 Check of fuel filter .....2.5 Fuel filter replacement .....2.6 Check and cleaning of spark plug points .....2.7 Replacement of spark plug .....

1) See the engine booklet for a full list and methods of work.

2) If worn, immediately contact a Licensed Service Centre for the replacement.

3) General lubrication should be carried out whenever the machine is to be left unused for a long period.


Technical notes

ENGINE OIL DRAIN

Follow the instructions in the engine booklet.

Drain the engine oil by unscrewing the oil fill plug and using the syringe supplied.

Fit the pipe onto the syringe and insert it right into the hole. Drain all the engine oil, repeating if necessary until there is no oil left in the engine.

MAINTENANCE


Documents

Ride on TECHNICAL DATA/NOTES LAWN-TRACTOR Ride on TECHNICAL DATA/NOTES