2
RIG 3 SPECIFICATIONS December 2017 General: Total Measured Depth 4,200 m (Telescopic Double), Racking Capacity: 4,200 m K.B. to Ground: 5.39 m Bottom of table Beam to Ground: 4.20 m Approx. Loads: Rig: 13 Loads, Drill pipe and drill collars: 6 Loads (Pipe Tubs) Boiler: 1 Load, Top Drive 1 Load EQUIPMENT Drawworks: T.S.M. 7000 Auxiliary Brake: Eaton 324 Rig Power and Distribution: Detroit Diesel Series 60 c/w Allison 6061 Transmission Max. Power: 470 kW Mast: Cassady 32 m Telescopic Double Max. Hook Load: 155,000 daN Substructure: Cassady 1 Piece Center Load (Self Levelling) 12.62 m x 4.41 m x 4.62 m (4.77 m w/pontoons) Max. Pipe Setback: 133,000 daN Crown Block: Cassady T.S.M. 5 x 36 Block/Hook: National 435 G 175, Max. Load: 155,750 daN Top Drive: FDS 250T, Rating: 225,000 daN Drilling Line: 28.5 mm x 1,067 m Rotary Table: National C-175-S, 444.5 mm Max. Load: 133,000 daN Rotary Torque: Lesko 1910 Series Base Mount Roto-Torque Rotary Brake: Farwick 18” Air Applied Mud Pumps: 2 x Continental Emsco F-1000, 140 mm x 254 mm Triplexes Input Power: Caterpillar C-27 Liner Size: 140 mm, Max. Allowable SPM: 140 Max. Allowable Operating Pressure: 80% Liner Rating Circulating System: Rated to 35,000 kPa Mud Tanks: 1 Tank with 4 Compartments, Active Volume: 68.8 m 3 Trip Tank Volume: 4.67 m 3 Pill Tank: 5.4 m 3 2 - Go Getter mud hoppers 3 - Eurodrive 25.6 kW agitators 4 – 1,700 kPa Low pressure mud guns 2 - 30 kW Mission Magnum transfer pumps www.beaverdrilling.com Operaons: 2003 - 76 Avenue, Edmonton, AB T6P 1P6 Corporate: 910, 500 - 4 Avenue S.W., Calgary, AB T2P 2V6 Phone 780.436.3650 Fax 780.436.4640 Phone 403.265.6472

RIG 3 SPECIFICATIONS - Beaver Drillingbeaverdrilling.com/wp-content/uploads/rigdatasheets/Rig3-General...…...continued Rig 3 Specifications Shale Shaker: DFTS Linear Motion x 2 Accumulator:

Embed Size (px)

Citation preview

Page 1: RIG 3 SPECIFICATIONS - Beaver Drillingbeaverdrilling.com/wp-content/uploads/rigdatasheets/Rig3-General...…...continued Rig 3 Specifications Shale Shaker: DFTS Linear Motion x 2 Accumulator:

RIG 3 SPECIFICATIONS December 2017

General: Total Measured Depth 4,200 m (Telescopic Double), Racking Capacity: 4,200 m

K.B. to Ground: 5.39 m Bottom of table Beam to Ground: 4.20 m Approx. Loads: Rig: 13 Loads, Drill pipe and drill collars: 6 Loads (Pipe Tubs)

Boiler: 1 Load, Top Drive 1 Load

EQUIPMENT Drawworks: T.S.M. 7000 Auxiliary Brake: Eaton 324 Rig Power and Distribution: Detroit Diesel Series 60 c/w Allison 6061 Transmission

Max. Power: 470 kW Mast: Cassady 32 m Telescopic Double Max. Hook Load: 155,000 daN Substructure: Cassady 1 Piece Center Load

(Self Levelling) 12.62 m x 4.41 m x 4.62 m (4.77 m w/pontoons) Max. Pipe Setback: 133,000 daN Crown Block: Cassady T.S.M. 5 x 36 Block/Hook: National 435 G 175, Max. Load: 155,750 daN Top Drive: FDS 250T, Rating: 225,000 daN Drilling Line: 28.5 mm x 1,067 m Rotary Table: National C-175-S, 444.5 mm Max. Load: 133,000 daN Rotary Torque: Lesko 1910 Series Base Mount Roto-Torque Rotary Brake: Farwick 18” Air Applied Mud Pumps: 2 x Continental Emsco F-1000, 140 mm x 254 mm Triplexes

Input Power: Caterpillar C-27 Liner Size: 140 mm, Max. Allowable SPM: 140

Max. Allowable Operating Pressure: 80% Liner Rating Circulating System: Rated to 35,000 kPa Mud Tanks: 1 Tank with 4 Compartments, Active Volume: 68.8 m3

Trip Tank Volume: 4.67 m3 Pill Tank: 5.4 m3

2 - Go Getter mud hoppers 3 - Eurodrive 25.6 kW agitators

4 – 1,700 kPa Low pressure mud guns 2 - 30 kW Mission Magnum transfer pumps

www.beaverdrilling.com Operations: 2003 - 76 Avenue, Edmonton, AB T6P 1P6 Corporate: 910, 500 - 4 Avenue S.W., Calgary, AB T2P 2V6 Phone 780.436.3650 Fax 780.436.4640 Phone 403.265.6472

Page 2: RIG 3 SPECIFICATIONS - Beaver Drillingbeaverdrilling.com/wp-content/uploads/rigdatasheets/Rig3-General...…...continued Rig 3 Specifications Shale Shaker: DFTS Linear Motion x 2 Accumulator:

…...continued Rig 3 Specifications

Shale Shaker: DFTS Linear Motion x 2 Accumulator: Control Tech 5 Function PLC

Capacity: 454 L, Pressure: 21,000 kPa Choke Manifold: Barton 3 1/8 3000# NACE Gut Line: 76 mm, Wing Lines: 76 mm

Manual Choke: 2 - 76 mm Willis M3F 3030 Mud Gas Separator: Size: 762 mm x 3 m Nace, BOP Class IV Inlet Line: 101 mm, Outlet: 203 mm Valves: HCR Valve: National Rating 21,000 kPa

Upper Kelly Cock: Griffith Rating 21,000 kPa

Stabbing Valve: Griffith Rating 21,000 kPa B.O.P.: 228 m x 21,000 kPa Nace, BOP Class IV Annular: Shaffer

Blind Ram: Shaffer LWP Single Pipe Ram: Shaffer LWP Single, Ram Carriers: Type 64 Fluid Containment: Invert Management/Kelly Kan fluid containment system Drill Pipe: As per bid Drill Collars: 22 – 165 mm x 57 mm x 208 m x 4 H-90

2 – 228 mm x 71 mm x 19 m x 7 H-90 Tankage: Water: 88.7 m3

Fuel: 21,000 L Main Light Plant: Detroit Diesel Series 60 350 kW 220/440 Standby Light Plant: Detroit Diesel Series 60 350 kW 220/440 Boiler: Volcano 37 kW Instrumentation: Electronic Drilling Recorder: Pason Survey Instrument: Taylor Pipe Spinner: Hawk Spinmaster Model 550 H Pipe Handler: Alco “Make+Break” Iron Roughneck c/w hydraulic power slips Catwalk: Rig Shop Hydraulic Skate

Accommodation: Available Upon Request

www.beaverdrilling.com Operations: 2003 - 76 Avenue, Edmonton, AB T6P 1P6 Corporate: 910, 500 - 4 Avenue S.W., Calgary, AB T2P 2V6 Phone 780.436.3650 Fax 780.436.4640 Phone 403.265.6472