™

© 2012 Hobbico®, Inc. All rights reserved.

To convert your transmitter to right rudder stickcontrol, please select your transmitter’s bookmarkto the left.

Right Rudder StickConversions

™

Mode > PMX1

Press Select

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick Conversion

Press both Mode and Select

NOTE: Trim is still on the left. Cannot deactivate left stick.

Set to ActiveSet to 100%

Slave ONCH4

Press SelectMaster ONCH1

Futaba® 6EX

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 6J

PMX1

To deactivate the left stick (so that rudder is only on the right):

ONMAS CH1SLV CH4SW ON+100%

–100%

ONMAS CH4SLV CH4

SW D/ P.MIX must be in the forward position.PMX2

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 7C

NOTE: Rudder trim is still on left side.

Select P-Mix1 > press wheel

Press and hold Mode/Page > Press Mode again > P-Mix Page

To deactivate the left stick(rudder is only on the right):

P-Mix1 > ONMaster > CH1Slave > CH4Link > OFFSW > ––v Button (cursor down)

Rate +100% +100%

Select P-Mix2 > press wheelP-Mix2 > ONMaster > CH4Slave > CH4SW > ––v Button (cursor down)

Rate –100% –100%

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 8FG

CH 4 change to AILGo to Linkage Menu > Function

NOTE: Trim is now enabled on the right stick and this also disables the left stick and trim.

CRTL should now read J1TRIM should now read T1

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 8U

Select P–Mix1 > ON

Press Mode down Cursor left > Advanced Menu

To deactivate the left stick (so that rudder is only on the right):

AIL > Rud

NOTE: The trim is deactivated on the left side.

Rate +100% +100%

NOTE: The trim is active on the right side.Trim ON

AIL > RudRate –100% –100%Trim ON

Select P–Mix2 > ON

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 9C

Rate –100% –100%NOTE: Trim is active on the right side.

Prog. Mix 1 (Page 2/2)Mode/Page > Basic Menu > Mix (advanced Menu)

To deactivate the left stick(rudder is only on the right):Mix > ON

Master > AileSlave > RuddLink > OFFTrim > ONSwitch > EPosi > Null

Mix > ONMaster > Rudd

ONRudd > Rudd

Slave > RuddLink > OFFTrim > ON

Posi > NullSwitch > C

ONAile > Rudd

Mode/Page Button (Page 1/2)

Rate +100% +100%Rate –100% –100%

Prog. Mix 2 (Page 2/2)

Prog. Mix 2 (Page 2/2)

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 9Z

NOTE: Trim is active on the right side.

Program Mix 1To deactivate the left stick(rudder is only on the right):

Ail: Master

Rud: Slave

Active: Mode (ON)

Press Next

Trim: Active

+100% Rate A

+100% Rate B

Program Mix 2

Rud: MasterRud: Slave

Active: Mode (ON)

Press NextTrim: Active

–100% Rate A–100% Rate B

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 10C

Select Prog. Mix1-8 Select 1 > INH

Press Mode twice > Advanced Menu

Set Rate to +100% +100%

Slave > CH4Master > CH1

MIX > ONTrim > ON

To deactivate the left stick(rudder is only on the right):

Select Prog. Mix1-8 Select 2

Set Rate to –100% –100%

Slave > CH4Master > CH4

MIX > ONTrim > ON

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 12FG

CH4 select RudderLinkage Menu > Function

Activate the Trainer Mode

To deactivate the left stick (so that rudder is only on the right):

Control for CH4 set to J1Trim for CH4 set to T1

NOTE: The trim is active on the right side and deactivated on the left.

Control ––Trim ––

CH2 select Aux 1Linkage Menu > Function

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 12Z

CH4 change to Aileron

Linkage Menu

NOTE: Trim is now on the right side.

Activate the trainer setting.

CH1 change to Aux 1

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionFutaba® 14MZ

CH4 select Rudder

Linkage Menu > Function

To deactivate the left stick (so that rudder is only on the right):

Control for CH4 set to J1

NOTE: The trim is active on the right side.

Trim for CH4 set to T1

NOTE: The trim is deactivated on the left side.

CH2 select Aux 1

Linkage Menu > Function

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionHitec® Aurora 9

System Menu

To deactivate the left stick (so that rudder is only on the right):

Channel FunctionCH4 Press Rudd then select Aile

NOTE: The trim is active on the right side.

CH4 Press Aile then select Aux1Channel Function

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionHitec® Optic 6

To deactivate the left stick (so that rudder is only on the right):

Ail D/R SW3 must be in the down position.PMix1Mas > 1Slv > 4+100%

PMix2Mas > 4Slv > 4–100%

Elev/Rudd D/R SW1 must be in the down position.

NOTE: The trim is on the left side

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionJR® 10X

To deactivate the left stick (so that rudder is only on the right):

Enter > Input NO.51 Mix 1 > Aile > RuddTrim > ON–100%–100%

Enter > Input NO.51 Mix 2 > Rudd > RuddTrim > ON–100%–100%

NOTE: The trim is now on the right side. However, the left stick cannot be disabled 100%.

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionJR® X9303

To deactivate the left stick (so that rudder is only on the right):

List Button > Prog Mix 2 > Activate > Rudd > RuddPoint –0 +100Point –3 –0Point –6 –100

NOTE: The left stick cannot be disabled 100%.

List Button > Prog Mix 1 > Activate > Aile > RuddPoint –0 –100Point –3 –0Point –6 +100

NOTE: The trim is still active on the left side as well.

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionJR® XP6102

Scroll to Mix 1 > Ail > Rud

Press Down and Select for Access

To deactivate the left stick (so that rudder is only on the right):

NOTE: Trim is still on the left side.

+100% +100%Always ON

–100% –100%Always ON

Scroll to Mix 2 > Rud > Rud

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionSpektrum® DX6

Mix A–R

Enter (Push both buttons forward)

NOTE: Trim is still on the left side (cannot disable).

+125%

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionSpektrum® DX6i

To deactivate the left stick (so that rudder is only on the right):

Go to Set Up List > Adjust List > Mix 1ActiveAile > Rud ActRate adjust to desired travelTrim > Act (Aile trim works for the Rudd)

ActiveRudd > RuddRate L 100% R 100%

Go to Set Up List > Adjust List > Mix 2

NOTE: The trim is still active on the left side as well.

™

© 2012 Hobbico®, Inc. All rights reserved.

Right Rudder Stick ConversionSpektrum® DX7

Rate +125%Rate +125%SW: ON

Rate –100%Rate –100%SW: ON

Prog. Mix 1 > Aile > Rudd ON

Access (Press Scroll/Down with Select at the same time)

To deactivate the left stick (so that rudder is only on the right):

NOTE: Trim is still on the left side.

Prog. Mix 2 > Rudd > Rudd ON

™

© 2012 Hobbico®, Inc. All rights reserved.

Futaba® 4VF JR® 421EX

Futaba 4YBF

Futaba 5U

Futaba 6H

Futaba 6DA

Futaba 6YG

Futaba 6YF

Futaba 4YF

Futaba 7NFK

Radios that cannotbe converted toRight Rudder Stick:

All trademarks property of their respective owners.