Upload
others
View
19
Download
0
Embed Size (px)
Citation preview
14 TONNE CPT TRACK MOUNTED RIG (CPT002)
CPT RIG DIMENSIONS
TOTAL LENGTH = 4900MM
TOTAL WIDTH = 2920MM
TOTA
L HE
IGHT
= 3
360M
M
RIGS
INSITUSI.COM
CPT 002 Testing in Kent
TOTAL WEIGHT
CPT RAM THRUST CAPACITY
MAXIMUM
PENETRATION
PERFORMANCE RATES
TYPICAL SITES FOR THIS RIG
14 TONNES
10 TONNES
20-30M DEPENDING ON THE GROUND CONDITIONS
120M OF TESTING IN A DAY DEPENDING ON
ACCESS TO POSITIONS
SOFT BOGGY SITES. THE RIG HAS VERY LOW GROUND BEARING PRESSURE DUE TO THE WIDTH OF THE TRACKS.
CPT RIG DETAILS
In Situ has a wide range of rigs which meet the clients varied CPT requirements often in difficult terrains. Projects may require CPT testing in areas which range from motorways to rugged mountainous terrain, to offshore work; the access to the projects may often be restricted for manoeuvring.
In Situ has rigs to meet all clients needs and situations .
14 TONNE CPT TRACK MOUNTED RIG (CPT002)
CPT RIG DIMENSIONS
TOTAL LENGTH = 4900MM
TOTAL WIDTH = 2920MM
TOTA
L HE
IGHT
= 3
360M
M
RIGS
INSITUSI.COM
CPT 002 Testing in Kent
TOTAL WEIGHT
CPT RAM THRUST CAPACITY
MAXIMUM
PENETRATION
PERFORMANCE RATES
TYPICAL SITES FOR THIS RIG
14 TONNES
10 TONNES
20-30M DEPENDING ON THE GROUND CONDITIONS
120M OF TESTING IN A DAY DEPENDING ON
ACCESS TO POSITIONS
SOFT BOGGY SITES. THE RIG HAS VERY LOW GROUND BEARING PRESSURE DUE TO THE WIDTH OF THE TRACKS.
CPT RIG DETAILS
In Situ has a wide range of rigs which meet the clients varied CPT requirements often in difficult terrains. Projects may require CPT testing in areas which range from motorways to rugged mountainous terrain, to offshore work; the access to the projects may often be restricted for manoeuvring.
In Situ has rigs to meet all clients needs and situations .
20 Tonne excavaTor MounTed cPT rig (cPT 009)
require CPT testing in areas which range from motorways to rugged mountainous terrain, to offshore work; the access to the projects may often be restricted for manoeuvring.
In Situ has rigs to meet all clients needs and situations .
cPT rig deTails
cPT rig diMensions
drive sysTeM
ToTal weighT
ground bearing Pressure
cPT raM ThrusT caPaciTy
MaxiMuM PeneTraTion
PerforMance raTes
TyPical siTes for This rig
DepenDent on the excavator or rrv it is attacheD to.
5 tonnes plus the reaction from the excavator/rrv possible up to 20 tonnes.
DepenDent on the excavator or rrv.
20 tonnes
30-30m DepenDing on the grounD conDitions.
80-150m of testing in a Day DepenDing on access to positions.
rail sites both on the track beD or on embankments anD cuttings. off track work on embankments anD areas of restricteD access.
TOTAL WIDTH = 1910MM TOTAL LENGTH = 2660MM
TOTA
L HE
IGHT
= 2
039M
M
14 TONNE CPT TRACK MOUNTED RIG (CPT002)
CPT RIG DIMENSIONS
TOTAL LENGTH = 4900MM
TOTAL WIDTH = 2920MM
TOTA
L HE
IGHT
= 3
360M
M
RIGS
INSITUSI.COM
CPT 002 Testing in Kent
TOTAL WEIGHT
CPT RAM THRUST CAPACITY
MAXIMUM
PENETRATION
PERFORMANCE RATES
TYPICAL SITES FOR THIS RIG
14 TONNES
10 TONNES
20-30M DEPENDING ON THE GROUND CONDITIONS
120M OF TESTING IN A DAY DEPENDING ON
ACCESS TO POSITIONS
SOFT BOGGY SITES. THE RIG HAS VERY LOW GROUND BEARING PRESSURE DUE TO THE WIDTH OF THE TRACKS.
CPT RIG DETAILS
In Situ has a wide range of rigs which meet the clients varied CPT requirements often in difficult terrains. Projects may require CPT testing in areas which range from motorways to rugged mountainous terrain, to offshore work; the access to the projects may often be restricted for manoeuvring.
In Situ has rigs to meet all clients needs and situations .
14 TONNE CPT TRACK MOUNTED RIG (CPT002)
CPT RIG DIMENSIONS
TOTAL LENGTH = 4900MM
TOTAL WIDTH = 2920MM
TOTA
L HE
IGHT
= 3
360M
M
RIGS
INSITUSI.COM
CPT 002 Testing in Kent
TOTAL WEIGHT
CPT RAM THRUST CAPACITY
MAXIMUM
PENETRATION
PERFORMANCE RATES
TYPICAL SITES FOR THIS RIG
14 TONNES
10 TONNES
20-30M DEPENDING ON THE GROUND CONDITIONS
120M OF TESTING IN A DAY DEPENDING ON
ACCESS TO POSITIONS
SOFT BOGGY SITES. THE RIG HAS VERY LOW GROUND BEARING PRESSURE DUE TO THE WIDTH OF THE TRACKS.
CPT RIG DETAILS
In Situ has a wide range of rigs which meet the clients varied CPT requirements often in difficult terrains. Projects may require CPT testing in areas which range from motorways to rugged mountainous terrain, to offshore work; the access to the projects may often be restricted for manoeuvring.
In Situ has rigs to meet all clients needs and situations .
PROJECT REVIEW
RIGS
INSITUSI.COM
HUMBER, ENGLANDThe site had been identified for the installation of a windfarm, this site was on agricultural land, this land was unsuitable for a wheeled CPT rig however the crawler rig was suitable to handle the terrain.
This project involved 2 Cone Penetration Tests and a Seismic Dilatometer test at each of the 12 wind turbine locations. In addition to the In situ testing a borehole was also carried out at each location.
Over a period of 2 weeks, the crawler performed well, sometimes in very wet ploughed fields. The client was impressed by the amount and quality of data obtained from the CPTU and the seismic dilatometer.
IN SITU SITE INVESTIGATIONPenetration House, 13 Vale Road, Battle,E Sussex, TN33 0HE, United Kingdom
T: +44 (0) 845 862 0558F: +44 (0) 845 862 0559E: [email protected]
ProjecT review
newPorT/ Maindee dePoT, wales In Situ were asked to work on a long term rail project for a client utilising our rail rig and undertaking day shifts and night time possessions. The project involved CPTs, pressuremeter, seismic dilatometer and installation of vibrating wire piezometers.
The rig is attached to the road railer platform which then enables us to perform the necessary testing to provide our client with the high quality geotechnical data that they require.
The project relates to the electrifying of the Great Western route to make journeys more reliable, greener and quieter for thousands of passengers. The electrification of one of Britain’s busiest and oldest railways will improve connections between major towns and cities across southern England and South Wales.