Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
RipTide and XCam- Designed for Rugged Use Designed for direct “plug and play” connection to the RipTide Data Logger, the XCam IP68 JPEG Still Image Capture Camera is an outstanding option with the RipTide Data Logger. Completely submersible and equipped with strong LED lighting the XCam illuminates issues, sends the images directly to our cloud hosted platform and optionally sends alarms via text, email, etc. Battle storms and inflow and infiltration with the unfair advantage of knowing what was previously unseen within your wastewater and storm water collection systems.
Programming features allow for image capture frequency changes dependent on condition and settings. Utilize the RipTide/XCam artificial intelligence (AI) features to capture depth readings via images. Optionally pair FloWav's other proven sensors with the RipTide and XCam for the ultimate flow-monitoring device. For many, seeing is believing and never has it been more possible to see images of your collected data!
The RipTide Checks Your Blind SpotThe XCam is an excellent option for the RipTide data logger and RTU family, providing highly-reliable, direct-to-host data monitoring in a single package, aimed at the utility and environmental sector. The RipTide's flexible device configuration enables the measurement of a variety of analog and digital signals. This data is stored internally on non-volatile flash memory with upstream communications provided using an internal 4GX cellular modem. The cellular options provide support for tri-band 4GX option, permitting use on CAT-M1 and NB-IoT network.
RipTideREMOTE MoniToRing SySTeMP r o g r a m m a b l e H D C a m e r a W i t h W i r e l e s s C o m m u n i c a t i o n s
RipTide Features:
Surcharge Alarms
Stream Flow & Level Monitoring
Long Battery Life
Internal 4G Modem
Remote Device Management
Applications:
I/I Studies
Sewer Flow Metering
Irrigation Systems
CSO Monitoring
Storm Water
Proudly Made inthe USA
TECHNICAL SPECIFICATIONS
ImagePicture Size
Picture Type
Picture File
Image Sensor
640 x 480 Pixels
Color
Standard “.JPG” image file (typical max. file size is 40KB), file name is time/date
Stamped CMOS VGA color sensor with JPG compression processor
Fixed Focus factory set (not user adjustable)
Fixed 56 Degree viewing angle (not user adjustable)
Focus Type Viewing Angle
White Balance
Brightness
Contrast
Exposure
Tuning
AutomaticAutomatic, 4 manual bias modifiers (2 above and 2 below “Normal”)
Automatic, 4 manual bias modifiers (2 above, and 2 below ‘Normal’)
Automatic, 4 manual bias modifiers (2 above, and 2 below ‘0’)
Local configuration / picture setup (Brightness / Contrast / Exposure) via Configurator M+ Device configuration software or Remote configuration via ClearSCADA®
Power Supply
Power
Mounting
Connection
Cable
Environment
Optional Equipment - UltraSonic and Radar Depth Sensors- Area Velocity- Conductivity Sensors
www.flowav.com
Flowav, Inc 4295 Cromwell Rd Suite 522 Chattanooga, TN 37421
1.800 855 1428
Regulated 5 Volts DC, power is provided by RipTideX1-002-DA Communications Port Approx. 250 mA with camera and LED illumination on
Supplied with powder coated stainless steel mounting bracket and stainless-steel mounting hardware, provides multiple mounting options, M4 diameter mounting screws, 1.5in -2.75in Dia. Stainless clamp
Supports direct connection to RipTide Logger RS232 Communication Port
Supplied with factory terminated and UV rated 25ft plug-and-play connection cable
IP68 Protection, fully potted design, -4 to + 185°F Operating Temperature range, 0-95% Rel. Humidity (non-condensing)
Nominal 1.5in x 1.9 in depth, not including cable gland or mounting bracket
Requires RipTide Logger running Firmware Version 3.376 or higherDimensions
Method Dopler ultrasound, twin PZT disks
Transducer Type Ceramic Disks
Minimum Depth 0.90 in.
Range -5 to 20 ft/s
Accuracy +/-2% of reading
Operating Temp 32 deg F to 160 degF
Image Controls
PSA-AV (Area Velocity Meter)
Measurement Resolution .01 inches (0.25 mm)
Measurement Accuracy +/- 0.1% of target range (uniform temperature)
Power Required 12 V DC to 24 V DC (reverse polarity protected), 30 mA, typical
Frequency 160kHz
Zero & Span Distance Programmable from min. 1.5in distance to over 5 feet
Operating Temperature -20°C to 65°C
Housing IP Rating IP67
StingRay UltraSonic Depth Sensor
Untitled