Rmx - Bcr2000 Read Me

8/18/2019 Rmx - Bcr2000 Read Me

1/9

- continues -

Behringer BCR2000 Controller Template

Using a hardware controller with Stylus RMX gives you maximum control

over your groove production. You can edit, re-mix, and manipulate RMX

grooves instantly in real time. It’s powerful, fun, and musically rewarding!

There are two main steps to perform in order to get started; loading the

MIDI sysex data for the BCR2000, and selecting the template in Stylus RMX.

The BCR2000 features a great collection of push-style encoders, knobs and

switches. The template takes full advantage of those features – every singlecontrol is used.

8/18/2019 Rmx - Bcr2000 Read Me

2/9

STEP 1 – SET UP THE BCR2000

Make sure you have installed the hardware and software for the BCR2000

according to Behringer’s documentation.

MIDI system exclusive preset data must be sent to the BCR2000. You canuse any sys-ex utility that supports .syx files.

For Mac OSX, we suggest SysEx Librarian, a freeware tool available at:

http://www.snoize.com/SysExLibrarian/

For PC, we recommend MIDI-OX, which is available at:

http://www.midiox.com/moxdown.htm

TRANSFERRING SYSEX TO THE BCR2000

IMPORTANT - This procedure places preset data into BCR2000

temporary memory. After you have transferred the sysex file, you

will need to STORE it to the desired preset location.

1. Open the RMX_BCR2000.syx file in the Sysex tool you have chosen.

The file is located in the Behringer BCR-2000 support directory within

the MIDI Learn directory.

…/SAGE/Stylus RMX/Patches/MIDI Learn/Behringer BCR-2000/RMX_BCR2000.syx

2. Initiate a sysex transfer to the BCR2000. You will see the display onthe BCR2000 flashing. Once the transfer is complete, the flashing will

stop.

3. The preset data is now in the temporary memory buffer of theBCR2000. To save it permanently, be sure to press the STORE button

on the BCR2000, select the destination preset location for storage, and

then press STORE again.

8/18/2019 Rmx - Bcr2000 Read Me

3/9

STEP 2 – SET UP STYLUS RMX

Make sure you have Stylus RMX version 1.5 or above installed.

SELECT THE CONTROLLER TEMPLATE IN RMX

From the Stylus RMX Utility menu (the button denoted with a Floppy icon),

select MIDI Learn / Load Template.

Select the template Behringer BCR-2000.ctl_rmx

You are ready to control Stylus RMX from the BCR2000.

8/18/2019 Rmx - Bcr2000 Read Me

4/9

USING RMX AND THE BCR2000

The Behringer BCR-2000.ctl_rmx template works with the preset you

stored in the BCR2000.

Be sure that your host application is sending MIDI to RMX; then load grooves

into all 8 parts.

The table at the end of this document shows how the BCR2000 hardware

controls are mapped to Stylus RMX. Have fun exploring the amazing features

of Stylus RMX from your hardware controller!

8/18/2019 Rmx - Bcr2000 Read Me

5/9

CREATE AND SHARE YOUR OWN TEMPLATES

The template we have provided is only the beginning of what you can do with

your hardware controller and Stylus RMX. We’ve provided a blank table for

you to document your own Controller Template creations. You will find it in

the User Template Tools folder, which is located inside the MIDI Learndirectory on your hard drive.

…/SAGE/Stylus RMX/Patches/MIDI Learn/User Template Tools/)

We encourage you to create your own templates, and then share them at the

Yahoo Spectrasonics User Group:

http://launch.groups.yahoo.com/group/spectrasonics/

Enjoy using Stylus RMX with your BCR2000.

Best regards,

The Spectrasonics Team

8/18/2019 Rmx - Bcr2000 Read Me

6/9

BCR2000 Multi Part Controller Template Page 1

- continues -

HARDWARE CONTROLLER:

BEHRINGER BCR2000

HARDWARE DATA FILE: HARDWARE PRESET:

RMX_BCR2000.syx Selected by User

STYLUS RMX TEMPLATE FILE:

Behringer BCR-2000.ctl_rmx

Parameters listed below are mapped to RMX parts 1-8, unless otherwise noted.*

Sysex loads into BCF2000 RAM. Be sure to STORE preset after transfer.

TEMPLATE OVERVIEW:

• Bottom Encoders 49-56 -> Mixer Level

• Middle Encoders 41-48 -> Master Filter Tone

• Upper Encoders 33-40 -> Master Filter Emphasis

• Upper Buttons 33-40 -> Solos

• Lower Buttons 41-48 -> Mutes

• Group 1 Push Encoders 1-8 -> Pan

• Group 1 Push Encoder Buttons 1-8 -> Pan Reset

• Group 2 Push Encoders 9-16 -> Aux 2 Send

• Group 2 Push Encoder Buttons 9-16 -> Reverse (momentary)

• Group 3 Push Encoders 17-24 -> Pitch

• Group 3 Push Encoder Buttons 17-24 -> Pitch Reset

• Group 4 Push Encoders 25-32 -> Chaos Pattern Amount

•

Group 4 Push Encoder Buttons 25-32 -> Chaos On/Off (momentary)

• Button 49 -> Half Speed (single part)*

• Button 50 -> Double Speed (single part)*

• Button 51 -> All Play

• Button 52 -> Global Reverse (momentary)

• Foot Switch -> CC# 118

• Foot Controller -> CC# 119

Control CC# Channel Description

Encoder 49 11 OMNI Mixer: Level Part 1








8/18/2019 Rmx - Bcr2000 Read Me

7/9


- continues -


Encoder 41 74 OMNI Edit: Master Filter Tone Part 1




Encoder 45 78 OMNI Edit: Master Filter Tone Part 5Encoder 46 79 OMNI Edit: Master Filter Tone Part 6



Encoder 33 82 OMNI Edit: Master Filter Emphasis Part 1








PUSH ENCODER – Group 1

E1 19 OMNI Mixer: Pan Part 1

b1 19 OMNI RESET Pan Part 1















8/18/2019 Rmx - Bcr2000 Read Me

8/9


- continues -



E9 58 OMNI Mixer: Aux 2 Send Part 1

b9 106 OMNI Edit: Reverse Part 1 (momentary)
















E17 66 OMNI Edit: Pitch Part 1

b17 66 OMNI RESET Pitch Part 1









E22 71 OMNI Edit: Pitch Part 6b22 71 OMNI RESET Pitch Part 6





8/18/2019 Rmx - Bcr2000 Read Me

9/9




E25 90 OMNI Chaos: Pattern Amount Part 1

b25 98 OMNI Chaos: On/Off Part 1 (momentary)















Button 49 5 Channelized Browser: Half Speed

Button 50 6 Channelized Browser: Double Speed

Button 51 51 OMNI All Play/Stop

Button 52 55 OMNI Edit: Global Reverse

Footswitch 1 118 - -

Footswitch 2 119 - -

Documents

Rmx - Bcr2000 Read Me