15
ROADSIDE EMERGENCY TIRE CHANGE Mr. Jody Hannan Automotive Technology

Roadside Emergency Tire Change

  • Upload
    devon

  • View
    64

  • Download
    0

Embed Size (px)

DESCRIPTION

Roadside Emergency Tire Change. Mr. Jody Hannan Automotive Technology. Action Plan. Topic- This presentation will give students knowledge of emergency car repair. We wi ll explore how to change a flat tire. Audience- - PowerPoint PPT Presentation

Citation preview

Page 1: Roadside Emergency Tire Change

ROADSIDE EMERGENCY TIRE CHANGE

Mr. Jody HannanAutomotive Technology

Page 2: Roadside Emergency Tire Change

Action Plan Topic-

This presentation will give students knowledge of emergency car repair. We will explore how to change a flat tire.

Audience- This presentation will be conducted as a self guided as computer

show through PowerPoint. This is intended for a group of 20 junior high school students who

have no previous car care knowledge.This is a broad based technology course.Students will complete presentation in school computer laboratory.

Learning objectives-Upon completion students will have knowledge to change damaged

automobile tire in emergency situations.

Page 3: Roadside Emergency Tire Change

What do I do?

•Don’t Panic

•Consult Owners Manual

•Take Your Time

Page 4: Roadside Emergency Tire Change

Steps to changing the tireLook

Read manual

Get spare tire and

tools

Loosen tire

Jack up car

Remove flat tire

Install spare tire

Lower Car

Retighten

Page 5: Roadside Emergency Tire Change

Look

Now that you see you have a flat tire you should begin to plan out your actions to fix it.

Page 6: Roadside Emergency Tire Change

Consult Owners Manual

Take a look at your manual located in the dash of the car. It will provide step by step details on how to change the tire.

Page 7: Roadside Emergency Tire Change

Spare tire and tools

After reading the manual you should now get the spare tire from the vehicle, the jack and the necessary tools.

Page 8: Roadside Emergency Tire Change

Loosen Tire

Set up the tires and tools close to the flat tire. Take the lug wrench and pre-loosen the lug nuts while the car is still on the ground.

Page 9: Roadside Emergency Tire Change

Jack Up Vehicle

Reference the owners manual to find the location to put the jack for this tire. Slowly raise the car until the tire is off of the ground about 2”.

Page 10: Roadside Emergency Tire Change

Remove Flat Tire•Using the lug nut wrench, remove the lug nuts from the vehicle.

•Place them in a secure location so you will not lose them.

•Remove the flat tire from the vehicle.

Page 11: Roadside Emergency Tire Change

Installing the Spare Tire•To install the spare tire you must line up the studs with the holes in the rim of the tire.

• Slide the spare into place and then reinstall the lug nuts. •Tighten the lug nuts as much as you can while the car is in the air.

Page 12: Roadside Emergency Tire Change

Lower the Car

Slowly lower the jack to place the car back on the ground.

Page 13: Roadside Emergency Tire Change

Retighten the Lug Nuts

You must check the lug nuts to make sure they are very tight. This will ensure that the tire will not fall

off car.

Page 14: Roadside Emergency Tire Change

Now What?

Go to closest repair shop

Spare tires are only for temporary use. Get your flat tire repaired.

Page 15: Roadside Emergency Tire Change

Note PagePRINT And keep in your car

Take a look at the flat tire and begin to plan your actions out. Your manual will contain all of the information on where the spare is located. Where to place the jack under

the vehicle. Removal and installation procedures. After reading the manual you should now get the spare tire from the vehicle, the jack and the necessary

tools. Usually all of these are contained together in one location. Take the spare and all of the tools and have them ready next to the flat. This will make it easier to remove

and install the new tire on the vehicle. In trucks spare tires can be located under the bed of the truck. In cars the spare is usually located in the

trunk of vehicle. Some vehicles have hubcaps that need to be removed. Slowly pull on the hub cap, and it will come off. Take the lug nut wrench that you have located in the vehicle. You should now loosen the lug nuts just a bit so you are able to remove them when the car is on the jack. Reference the owner’s manual to find the location to put the jack for this tire. Slowly raise the car until the tire is off of the ground about 2”. If it seems like the jack will fall STOP! You do not want the car to fall from the jack. Reposition the jack. Using the lug nut wrench, remove the lug nuts from the vehicle. Place them in a secure location so you will not lose them. Remove the flat tire from the vehicle. To install the spare tire you must line up the studs with the holes in the rim of the tire. Slide the spare into

place and then reinstall the lug nuts. Tighten the lug nuts as much as you can while the car is in the air. You will need the check the tightness when the car is on the ground. Slowly lower the jack to place the car back on the ground. You must check the lug nuts to make sure they are very tight. This will make sure that the tire will not fall off

of the car. Now that you have a spare tire installed you should get your old tire repaired and put back on your car. Spare tires are only made for temporary use.