Upload
trinhliem
View
220
Download
0
Embed Size (px)
Citation preview
“Your Source for a Complete Line of Electric Motors”
RolledSteelMotors
A Complete Line of Single Phase andThree Phase Rolled Steel Motors
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
Mission Statement
Company History
WARRANTY POLICY
To provide the United States market for industrial motors and controls with products which meet orexceed customer expectations for quality, performance, and reliability at the lowest possible cost anddelivered in accordance with the customer’s schedule, through our authorized distributor network.
North American Electric, Inc. is a wholesale supplier of Special Purpose and General Purpose, AC electricmotors and controls. We take pride in supplying high performance, high quality products at extremelycompetitive prices throughout the United States. Donald E. Hackman, Sr. and David E. Hackman foundedthe company in October of 1993. The company’s primary focus is sourcing quality electric motors fromvarious manufacturers, both locally and internationally, and distributing them throughout the UnitedStates through local distributors and service centers. Our nationwide distributor and service networkoffer strong local support for our products by providing critical logistical, technical and maintenancesupport as well as fast, friendly customer service.
All motors sold by North American Electric, Inc. are warranted to be free from defects in material andworkmanship. The warranty is 24 months from the date of manufacture but no less than 18 months fromdate of invoice. Also, all motors installed within 24 months from date of manufacture will be warrantedfor no less than 12 months from the date the motor is installed. North American Electric, Inc. shall, at itsoption and expense, either repair or replace any such motor or part, which is defective within the war-ranty period. To be covered under warranty, any motor must have at all times been operated or usedunder normal operating conditions for which the motor was designed.In the event of warranty claims, North American Electric, Inc. must be notified promptly following any
motor failure. The motor should be sent to a North American Electric, Inc. authorized service center todiagnose the cause of failure. After this examination, a determination will be made if the failure was dueto defective material and/or workmanship. If the failure was due to defective material and/or workman-ship, North American Electric, Inc. will replace or repair the motor.North American Electric’s liability under this warranty or any other warranty whether expressed or
implied in law or fact shall be limited to the repair or replacement of defective material and workmanship,and in no event shall North American Electric, Inc. be liable for consequential or indirect damages,including freight.
YYOOUURR SSOOUURRCCEE FFOORR AA CCOOMMPPLLEETTEE LLIINNEE OOFFEELLEECCTTRRIICC MMOOTTOORRSS !!!!!!
1
SINGLE PHASE, 56C FRAME, TEFC
11//33––22 HHPP 22,,44 PPOOLLEE
HHIIGGHH SSTTAARRTTIINNGG TTOORRQQUUEESS MMAANNUUAALLOOVVEERRLLOOAADD PPRROOTTEECCTTIIOONN ((OOPPTTIIOONNAALL))
CCAAPPAACCIITTOORR SSTTAARRTT // CCAAPPAACCIITTOORR RRUUNN DDEESSIIGGNN
RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN IIPP5555PPRROOTTEECCTTIIOONN--RREEMMOOVVAABBLLEE FFEEEETT
SINGLE PHASE OPEN DRIPPROOF
33,,55 HHPP 44 PPOOLLEE
HHIIGGHH SSTTAARRTTIINNGG TTOORRQQUUEESS
CCAAPPAACCIITTOORR SSTTAARRTT // CCAAPPAACCIITTOORR RRUUNN DDEESSIIGGNN
RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN CCAASSTTIIRROONN EENNDDBBEELLLLSS
SINGLE PHASE, FARM DUTY, TEFC
11//33––1100 HHPP 44 PPOOLLEE
HHIIGGHH SSTTAARRTTIINNGG TTOORRQQUUEESS MMAANNUUAALLOOVVEERRLLOOAADD PPRROOTTEECCTTIIOONN ((11//33 TTHHRRUU 55 HHPP))
CCAAPPAACCIITTOORR SSTTAARRTT // CCAAPPAACCIITTOORR RRUUNN DDEESSIIGGNN
RROOLLLLEEDD SSTTEEEELL FFRRAAMMEESS CCAASSTT IIRROONN EENNDDBBEELLLLSS
THREE PHASE, 56C FRAME, TEFC11//33––33 HHPP 22,,44 PPOOLLEE
HHIIGGHH EEFFFFIICCIIEENNCCYY DDEESSIIGGNN GGEENNEERRAALLPPUURRPPOOSSEE MMOOTTOORRSS
RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN,,AALLUUMMIINNUUMM EENNDDBBEELLLLSS
IIPP5555 PPRROOTTEECCTTIIOONN RREEMMOOVVAABBLLEE FFEEEETT
THREE PHASE OPEN DRIPPROOF
11––1155 HHPP 22,,44 PPOOLLEE
PPRREEMMIIUUMM EEFFFFIICCIIEENNCCYY DDEESSIIGGNN GGEENNEERRAALLPPUURRPPOOSSEE MMOOTTOORRSS
RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN,,CCAASSTT IIRROONN EENNDDBBEELLLLSS
PREMIUM CRUSHER DESIGN MOTORS11––550000 HHPP 44,,66,,88 PPOOLLEE
NNEEMMAA DDEESSIIGGNN CC HHIIGGHH SSTTRREENNGGTTHH 44114400 GGRRAADDEESSTTAAIINNLLEESSSS SSTTEEEELL SSHHAAFFTT
558866//77UU FFRRAAMMEE HHEEAAVVYY DDUUTTYY CCAASSTT IIRROONNCCOONNSSTTRRUUCCTTIIOONN ((IINNCCLLUUDDIINNGG FFAANN CCOOVVEERR))
BBEEAARRIINNGG SSIIZZEESS:: DDEE==NNUU332244 OODDEE==66332244
PREMIUM EFFICIENCYALUMINUM MOTORS
11––1100 HHPP 22,,44 PPOOLLEE
HHIIGGHH EEFFFFIICCIIEENNCCYY DDEESSIIGGNN GGEENNEERRAALL PPUURRPPOOSSEE,,TTHHRREEEE PPHHAASSEE,, TTEEFFCC MMOOTTOORRSS
LLIIGGHHTT WWEEIIGGHHTT AALLUUMMIINNUUMM FFRRAAMMEE
OIL WELL PUMP MOTORS, TEFC
33––115500 HHPP 66 PPOOLLEE
NNEEMMAA DDEESSIIGGNN DD HHIIGGHH SSLLIIPP((55%% TTOO 88%% SSLLIIPP)) SSPPEECCIIAALLPPUURRPPOOSSEE OOIILL WWEELLLL PPUUMMPP MMOOTTOORRSS
HHEEAAVVYY DDUUTTYY CCAASSTT IIRROONN FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN
VERTICAL HOLLOW SHAFTPUMP MOTORS
1100 HHPP –– 225500 HHPP,, 44 PPOOLLEEHHIIGGHH TTOORRQQUUEE -- HHIIGGHH TTHHRRUUSSTT
MOTOR SLIDE BASES
AAVVAAIILLAABBLLEE 5566CC TTHHRRUU 550055UU
THREE PHASE, TEFC ROLLED STEEL MOTORS
PPRREEMMIIUUMM EEFFFFIICCIIEENNCCYY DDEESSIIGGNN--GGEENNEERRAALL PPUURRPPOOSSEE,,
LLIIGGHHTT WWEEIIGGHHTT RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE
ELECTRIC MOTOR CONTROL
FFUULLLL VVOOLLTTAAGGEE SSTTAARRTTEERRSS
SSOOFFTT SSTTAARRTTSS
IINNVVEERRTTEERRSS
PPUUMMPP PPAACCKKAAGGEESSSTAINLESS STEEL
WASHDOWN DUTY MOTORS
11//33 HHPP -- 2200HHPP 22,,44,,66 PPOOLLEE
IIPP 6677 PPRROOTTEECCTTIIOONN
IINNVVEERRTTEERR DDUUTTYY
NEMA PREMIUM EFFICIENCYINVERTER DUTY MOTORS
MMEEEETTSS OORR EEXXCCEEEEDDSS NNEEMMAA PPRREEMMIIUUMMEEFFFFIICCIIEENNCCYY LLEEVVEELLSS QQUUAALLIIFFIIEESS FFOORREENNEERRGGYY EEFFFFIICCIIEENNCCYY RREEBBAATTEESS
PREMIUM EFFICIENCYEXPLOSION PROOF MOTORS
11––330000 HHPP 22,,44,,66 PPOOLLEEAALLLL MMOOTTOORRSS MMEEEETT OORR EEXXCCEEEEDD UULL 667744 SSPPEECCIIFFIICCAATTIIOONNAASS RREEQQUUIIRREEDD BBYY OOSSHHAA FFOORR IINNSSTTAALLLLAATTIIOONN AANNDD UUSSEE
IINN HHAAZZAARRDDOOUUSS LLOOCCAATTIIOONNSS..CCLLAASSSS II,, DDIIVVIISSIIOONN II,, GGRROOUUPPSS CC&&DD AANNDDCCLLAASSSS IIII,, DDIIVVIISSIIOONN II,, GGRROOUUPPSS EE,,FF AANNDD GG
UULL CCEERRTTIIFFIIEEDD -- FFIILLEE EE222288665544CCSSAA ++ ““CC”” ++ ““UUSS”” -- CCAANNAADDIIAANN SSTTAANNDDAARRDD
IISSOO99000011
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
SINGLE PHASE, TEFC, 56C FRAME
• 1/3-2 Horse Power• 1800 and 3600 RPM• C-Flange with Removable Feet
Heavy (9) Gauge RolledSteel Construction
High Starting Torque
NEMA Design B
Class F InsulationSystem with Class HVPI Epoxy ResinProtection
Double PunchedFoot Design
C-Flange withRemovable Feet
Totally EnclosedFan CooledProtection
APPLICATIONS:General Purpose Use on Pumps, Fans, Blowers, Compressors,Conveyors, Farm Equipment and Other Industrial CommercialMachinery Installed in Damp, Dusty or Dirty Environments. IP55as Standard. Suitable for Indoor and Outdoor Applications.These Motors have High Starting Torques and are Well Suited forApplications with High Starting Loads.
2 Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
“Buy on Value Not on Price”
IP55Protection
Internal Oil Seal onDrive End
SINGLE PHASE, 56C FRAME LIST PRICING
TECHNICAL DATA
3Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
*Refer to page 17 for mounting dimensions
Note: Also available with Manual Overload Protection. Please see Farm Duty Motors on Page 5.
4
FARM DUTY MOTORS
• 1/3 - 10 Horse Power• 1800 RPM• Manual Overload Protectionthrough 5HP
Heavy (9) GaugeRolled SteelConstruction
High Starting Torques
NEMA Design B
Class F InsulationSystem with ClassH VPI Epoxy ResinProtection
Double Punched Foot Design
C-Flange KitAvailable
Totally EnclosedFan Cooled (TEFC)Protection
Manual OverloadProtection Through5 HP
APPLICATIONS:General Purpose Use on Pumps, Fans, Conveyors, PoultryEquipment, Air Compressors and Other Farm Duty MachineryRequiring High Starting Torques.
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
“Buy on Value Not on Price”
IP55Protection
Internal Oil Seal onDrive End
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected] 5
FARM DUTY MOTORS LIST PRICING
TECHNICAL DATA
C FLANGE LIST PRICING
*Refer to pages 17 & 18 for mounting dimensions
SINGLE PHASE OPEN DRIPPROOF
• 3-5 Horse Power• 1800 RPM• Compressor Duty
High Efficiency Design
NEMA Design B
Oversized BearingUsed on Both DriveEnd and OppositeDrive End
Class F Insulation Systemwith Class H VPI EpoxyResin Protection
Heavy (9) GaugeRolled SteelConstruction
APPLICATIONS:General Purpose Use on Pumps, Fans, Conveyors, Blowers, AirCompressors, Refrigeration Equipment, Industrial Equipment,Milling Machines, Tools, Farm Equipment, Aeration Equipmentand Other General Purpose Applications Where Contaminantsare Minimal. These Motors have Extremely High StartingTorques for use on Applications with High Starting Loads.
6 Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
“Buy on Value Not on Price”
Sealed Bearings
HighStartingTorques
Open DripproofIP23 Protection
Double PunchedFoot Design
7Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected] 7
SINGLE PHASE OPEN DRIPPROOF MOTORSLIST PRICING
TECHNICAL DATA
C FLANGE LIST PRICING
180T 3180-SODP $65 12
*Refer to page 19 for mounting dimensions
8 Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
THREE PHASE, TEFC, 56C FRAME
• 1/3-3 Horse Power• 1800 and 3600 RPM• C-Flange with Removable Feet
Inverter Rated10:1VT; 5:CT High Starting Torque
NEMA Design B
Class F InsulationSystems with ClassH VPI Epoxy Resin
C-Flange withRemovable Feet
Totally EnclosedFan Cooled (TEFC)Protection
Heavy (9) GaugeRolled SteelConstruction
APPLICATIONS:General Purpose Use on Pumps, Fans, Blowers, Compressors,Farm Equipment and Other Industrial and CommercialMachinery Installed in Damp, Dusty or Dirty Environments.IP55 Protection as Standard. Suitable for Indoor and OutdoorApplications. Additionally, These Motors do Utilize PhaseInsulation Materials That are Suitable for use with VariableFrequency Drives.
“Buy on Value Not on Price”
Double PunchedFoot Design
IP55Protection
Internal Oil Seal onDrive End
9Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
THREE PHASE, TEFC, 56C FRAMELIST PRICING
TECHNICAL DATA
*Refer to page 20 for mounting dimensions
10 Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
THREE PHASE, TEFC,INTEGRAL HORSE POWER
• 1-10 Horse Power• 1800 and 3600 RPM• Inverter Rated
Inverter Rated10:1 Variable Torque5:1 Constant Torque
High Starting Torque
NEMA Design B
Class F InsulationSystems with ClassH VPI Epoxy Resin.
C-Flange KitsAvailable
Totally EnclosedFan Cooled (TEFC)Protection
Heavy (9) GaugeRolled SteelConstruction
APPLICATIONS:General Purpose Use on Pumps, Fans, Blowers, Compressors,Conveyors, Material Handling and Other Industrial MachineryInstalled in Damp, Dusty or Dirty Environments. Additionally,These Motors are Suitable for use with Variable FrequencyDrives.
“Buy on Value Not on Price”
Double PunchedFoot Design
IP55Protection
Internal Oil Seal onDrive End
11Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
THREE PHASE, TEFC,INTEGRAL HORSEPOWER
LIST PRICING
TECHNICAL DATAHP Full load Frame Service DE ODE LRA Full load FLT Ft-Lb LRT % BDT % Full Load % Full Load % Weight
RPM Factor Bearing Bearing At 460V At 460V Efficiency Power Factor
C FLANGE LIST PRICING
140T 180T 210T
3140-RSTE3180-RSTE3210-RSTE
$34$65$69
101215
*Refer to page 20 for mounting dimensions
12 Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
THREE PHASE,OPEN DRIPPROOF MOTORS
• 1-15 Horse Power• 1800 and 3600 RPM• Inverter Rated
AC Inverter Rated10:1 Variable Torque5:1 Constant Torque
High Efficiency Design
NEMA Design B
Oversized BearingsUsed on Both DriveEnd and OppositeDrive End
Class F InsulationSystem with Class HVPI Epoxy Resin
Open DripproofIP23 Protection
Heavy (9) GaugeRolled SteelConstruction
APPLICATIONS:General Purpose Use on Pumps, Fans, Blowers, Compressors,Material Handling and Other General Purpose ApplicationsWhere Contaminants are Minimal.
“Buy on Value Not on Price”
High StartingTorques
Sealed Bearings
Double PunchedFoot Design
13Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
THREE PHASE, OPEN DRIPPROOFLIST PRICING
TECHNICAL DATA
HP Full load Frame Service DE ODE LRA Full load FLT Ft-Lb LRT % BDT % Full Load % Full Load % WeightRPM Factor Bearing Bearing At 460V At 460V Efficiency Power Factor
*Refer to page 21 for mounting dimensions
14 Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
MOTOR SLIDE BASES
FEATURES:• Bases are provided with washers• Primed with Oven-Baked Primer for easy painting• All “D” bolts (or Motor mounting bolts) are welded into positionto prevent spinning and dropping from the slots
• All “D” bolts are fixed to the exact foot pattern of the motor toaid in easier motor installation
• All sizes are double-adjusting screw type
15Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
MOTOR SLIDE BASE DIMENSIONS56 – 286T
16 Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]
MOTOR SLIDE BASE DIMENSIONS324T – 505U FRAME
17
Single Phase TEFC Foot Mount
56 Frame – 145T Frame
Toll Free: 800-884-0404 • www.naemotors.com • e-m
ail: sales@
naem
otors.com
Single Phase TEFC C-Flange Mount
56C – 145TC Frame
18
Single Phase TEFC Foot Mount
182T – 215T Frame
Single Phase TEFC C-Flange Mount
182TC – 215TC Frame
Toll Free: 800-884-0404 • www.naemotors.com • e-m
ail: sales@
naem
otors.com
19
Single Phase Open Dripproof
182T – 184T Frame
C-Flange Single Phase Open Dripproof
182TC – 184TC Frame
Toll Free: 800-884-0404 • www.naemotors.com • e-m
ail: sales@
naem
otors.com
20
Three Phase TEFC
56 – 215T Frame
C-Flange Three Phase TEFC
56C – 215TC Frame
Toll Free: 800-884-0404 • www.naemotors.com • e-m
ail: sales@
naem
otors.com
Three Phase Open Dripproof
143T – 215T Frame
C-Flange Three Phase Open Dripproof
143C – 215TC Frame
Toll Free: 800-884-0404 • www.naemotors.com • e-m
ail: sales@
naem
otors.com
21
Distributed by:
North American Electric, Inc. P.O. Drawer 130 350 Vaiden Drive Hernando, MS 38632Toll Free: 800-884-0404 Phone: 662-429-8049 Fax: 662-429-8546 Sales: 800-884-0405
www.naemotors.com e-mail: [email protected]
Data subject to change without notice
Revised April 2011