SecurEdge 200

SecurEdge One

SecurEdge 2000 Fascia

Roof Edge Systemswww.metalera.com/carlisle

Carlisle’s roof edge systems are engineered and tested to withstand the harshest of conditions and are specifically designed to complement the Carlisle line of roof membranes. Every product is tested and proven to meet the ANSI/SPRI ES-1 roof edge standard set forth in the International Building

Code (IBC). This comprehensive standard, which has already been adopted by every state, requires roof edge products to meet or exceed previously determinded wind-resistance ratings. The roof edge is the most vulnerable part of the roof because it is subject to wind forces that greatly impact the integrity of the entire roof system. Carlisle Roof Edge Systems provide a full system warranty that covers both the membrane and the roof edge.

System BenefitsOverview• Full system is covered under one warranty

• Custom & radius profiles available; can accommodate multiple nailers

• Pre-slotted fastening holes for proper thermal movement & correct fastener placement

• Express colors & lead times available for SecurEdge 2000 Standard and SecurEdge One Standard

• Also available in standard & custom finishes

Installation Benefits

• Non-penetrating fascia design eliminates stripping in or heat-welding typical of other designs

• 12’ lengths for quicker installation

• No unsightly cover plates

• Arrives at the jobsite with all fasteners, splice plates and drivers included (sealant by others)

Testing

SecurEdge 2000 Standard FasciaFully Adhered or Mechanically Attached Singly Ply

24 ga. & .040” Fascia Cover

SecurEdge OneFully Adhered or Mechanically Attached Singly Ply

24 ga., .040”, .050” & .063 Fascia Cover

MIAMIDADE COUNTYAPPROVED

NOA No. 13-0419.03 12/11/18Miami-Dade County, Florida

800-558-2162 - www.metalera.com/carlisle

SecurWeld 200 TPO Skirted Drip Edgewith Factory Applied TPO flashing

24 ga. Drip

SecurEdge 2000 Drip Edge24 ga. & .040” Cover

SecurEdge 200 Snap-onSingly Ply Application, Snap-on Version

24 ga., .040”, .050” & .063” Cover

SecurEdge 200 Drip EdgeKynar Coated Version

24 ga., .040”, .050”, & .063” Cover

Carlisle Industrial Gutter System IG - 1, IG -2, IG - B Version (shown)

24 ga., .040”, .050” & .063

Secure 200 CopingTapered Version

22 ga., 24 ga., .040”, .050” & .063 Fascia Cover

Visit www.metalera.com/carlisle for a complete list of all our roof edge systems.

Materials & Finishes

Other Available Finishes:Galvanized Steel: 24 ga., 22 ga., 20 ga. & 16 ga.110 Copper: 16 oz. & 20 oz.304 Stainless steel (2B): 24 ga., 22ga. & 20 ga.Mill Finish: .040”, .050”, .063”, .080”, .100” & .125”

Carlisle also offers standard coil anodized finishes in clear, medium bronze, dark bronze and black. In addition to our standard finishes, Carlisle can provide custom color, post-coated Kynar® paint finishes and batch anodized finishes on all mill aluminum gauges listed.

IMPORTANT NOTE: Due to shade variations in the anodizing process, it is recommended that the contractor work with the architect or building owner to sort and install products according to the owner’s preference. Carlisle offers no warranty to anodized finishes and will not be held responsible for shade variation inherent to the anodizing process.

Vinyl masking should be removed as soon as possible.

Kynar® based fluropolymer coating is a high-grade architectural finish offering excellent resistance to degradation caused by nature’s elements and airborne contaminants. A limited thirty (30) year warranty is available on the standard coil-coated colors shown. A limited ten (20) year warranty is available on custom, postcoated aluminum applications. Kynar 500® is a registered trademark belonging to Arkema Inc.

These color samples are printer’s reproductions and may vary slightly from actual colors supplied. Finished color chip samples are available upon request. Carlisle will not be held responsible for color selections chosen from printed literature.

1600 Airport RoadWaukesha, WI 53188p: 800-558-2162 f: 800-770-3934

www.metalera.com/carlisle© 2017. By presenting this catalog, Carlisle does not claim to serve in any but an advisory capacity and can undertake no liability. If necessary, all recommendations contained herein regarding the use of our products should be modified to conform with local conditions and the materials employed. Carlisle reserves the right to make changes or to amend any of the information contained in this publication, whether to present new information obtained, or as needed to conform to a specified project, job or climactic condition.

Almond

Matte Black

Champagne (Metallic)

Sandstone

Burgundy (Brandywine)

Weathered Zinc

Dark Bronze

Teal

Mansard Brown

Patina Green

Cityscape

Terra Cotta

Zinc

Slate Gray

Cardinal (Regal) Red

Silversmith

Hunter Green

Clear Anodized

Hartford Green Colonial Red

Hemlock Green Forest (Sherwood) Green

Stone White

Charcoal (Charcoal Gray)

(Classic) Copper Penny

Bone White

Midnight (Extra Dark) Bronze

Silver (Metallic)**

Sierra Tan

Sky (Military) Blue

Sand Stone *

Medium Bronze

Interstate (Regal) Blue

Express Colors –

Standard Colors –

Premium Colors –

Award Blue

EvergreenMusket GrayGranite Slate Blue

Aged Copper

Mill Finish