Upload
-roto-bg
View
249
Download
4
Tags:
Embed Size (px)
DESCRIPTION
Roto Shafts: sewer, cable, appeasment, water meter, sand box. | Канализационни шахти, Кабелни шахти, Успокоителни шахти, RGS шахти - помпени, Водомерни шахти.
Citation preview
Shafts
sewercableappeasementwater metersandbox
SHAFTS CONSISTENT WITH THE STANDARDS:
ÜPrEN 15229: 2055ÜSIST EN 13598-1: 2004ÜPrEN 13598-2: 2005ÜSIST EN 14982-1: 200ÜPrEN 15229ÜSIST EN 13598-1Üpr EN 13598-2ÜSIST EN 14982ÜSISST EN 14802ÜSIST EN 14830ÜSIST EN 476ÜSIST EN 1277
Shafts are manufactured in one piece, which ensures the highest possible level of tightness. On entry and exit pages are prepared – no joints for PE, PP and PVC smooth or ribbed tubes of different dimensions.
SEWAGE shafts
Fast, easy INSTALLATION, comprehensive solution, height adjustment.
Small mass so they can be easily transported.
RESISTANCE to low and high temperatures (-65°C to +85°C), UV stability.
Designed in accordance with EU standards.
DURABILITY, long life, water tightness, resistance.
Shafts are manufactured from enviromentally friendly polyethylene. Possibility of 100% RECYCLING.
1st AWARD international environmental partner.
Affordable.
We provide service and tehnical advice in the field.
ADVANTAGES OF ROTO shafts
AWARD FOR QUALITY
250
200
160
H
SEWAGE shaft 400, 600
SEWAGE shaft 800
Code Dimensions (wxh) Inflow-Outflow 6951 800x1000 DN200/250/315 6952 800x1250 DN200/250/315 6953 800x1500 DN200/250/315 6954 800x1750 DN200/250/315 6955 800x2000 DN200/250/315 6956 800x2250 DN200/250/315 6957 800x2500 DN200/250/315 6969 800x2750 DN200/250/315 6970 800x3000 DN200/250/315 6971 800x3500 DN200/250/315 6972 800x4000 DN200/250/315
Code Dimensions (wxh) Inflow-Outflow 5910 400x1000 DN110/125/160 5911 400x1500 DN110/125/160 5700 625x1000 DN160/200/250 5703 625x1250 DN160/200/250 5701 625x1500 DN160/200/250 5702 625x1750 DN160/200/250
Slovenian product, fast delivery and delivery options.
www.roto.si | [email protected] Phone: +386 (0)2 52 52 175|
SEWAGE shafts
Code Dimensions (wxh) Inflow-Outflow 5812 1000x DN800/1000 5813 1000x2250 DN800/1000 5814 1000x2500 DN800/1000 5809 1000x2750 DN800/1000 5816 1000x3000 DN800/1000 5818 1000x3500 DN800/1000 5810 1000x4000 DN800/1000
2000
TECHNICAL APPROVAL
Code Dimensions (wxh) Inflow-Outflow 6973 1000x1250 DN200/315/400 6958 1000x1500 DN200/315/400 6959 1000x1750 DN200/315/400 6960 1000x2000 DN200/315/400 6961 1000x2250 DN200/315/400 6962 1000x2500 DN200/315/400 6963 1000x2750 DN200/315/400 6964 1000x3000 DN200/315/400 6974 1000x3500 DN200/315/400 6975 1000x4000 DN200/315/400
Code Dimensions (wxh) Inflow-Outflow 5823 1000x DN500/630 5824 1000x1750 DN500/630 5825 1000x2000 DN500/630 5826 1000x2250 DN500/630 5827 1000x2500 DN500/630 5828 1000x2750 DN500/630 5829 1000x3000 DN500/630 5831 1000x3500 DN500/630 5833 1000x4000 DN500/630
1500
SEWAGE shaft 1000
www.roto.si | [email protected] Phone: +386 (0)2 52 52 175|
SEWAGE shafts
CONNECTIONS ARE MADE BY:
a) b) with the crown drill do the hole, c) clean it, d) install an entry seal and lubricate
it with grease soap, e) with grease soap also lubricate the
end of the tube, f) and slide the tube into the shaft.
MAKING OF ADDITIONAL
mark the center,
Adjust shaft to ground level with hand saw at the marked lines.It's also possible to weld additional extension to increase the shaft for 250 mm.
INSTALLATION OF THE SHAFTSWhen the installation is taken into account the requirements and assumptions of the project documents, the recommendations of the manufacturer shafts and installations instructions from the SIST ENV 1046. Bright yet of final reinforced concrete slabs with a width of 200 mm, through which the static and dynamic loads transmitted to the hardened cover dam arround shaft should be at least 10 mm greater than the outer diameter of the shaft. The distance between the shaft and the final concrete plate must be at least 50 mm.
MOUNTING AND INSTALLATION shaftsConnecting sewer pipe with smooth shaft
Linking ribbed pipes DN/ID and DN/OD with shaft
a b
c d
a) Cut prepared at the desired dimensions bits,b) remove the 15 mm edge at an angle of 30 degrees, c) lubricate the edge of the steep mount, d) grease seal and inner tube part sleeves.
For corrugated pipes DN/ID the shafts are made with clamb ID, which is on the shaft and then we connect it with no problems to corrugated tube DN/ID.
For corrugated pipes DN/OD the shafts are made with clamb OD, which is on the shaft and then we connect it with no problems to corrugated tube DN/OD.
H
25
0
1200
4
Code Dimensions (wxh) 5790 1200x2000 5791 1200x2500 5792 1200x3000 5793 1200x3500 5794 1200x4000 5795 1200x4500
SEWAGE shaft 1200
a b
c d
e f
www.roto.si | [email protected] Phone: +386 (0)2 52 52 175|
The internal bright diameter,
www.roto.si | [email protected] Phone: +386 (0)2 52 52 175|
FITTING AND LAYING CABLE SHAFTS
ÜDig the hole at least 50 cm greater than the shaft is.
ÜAdjust the bottom of the cave with a small fraction.
ÜFit the shaft and bury the bottom edge with earth.
ÜIn the lower round part of the shaft we drull holes.
ÜInsert sealing rings for pipes and cabels.
ÜWe make straight cuts on laid pipes and pull them through the ring.
ÜTo link the concrete base and an auxiliary shaft use double-layer plastic hose.
ÜWe bury shaft mon layers with reinforcement.
ÜInstalled on the auxiliary shaft packaged plastic lid with concrete.
ÜIn case of mounting the shaft in the pavementm the shaft is inserted in the throat concrete framework on which to place the LTŽ lid framework.
ÜSecurity shaft is used for storage and mechanical protection of optical cable.
ÜThe advantage of the shaft is easy to install, robust and guaranteed seal against water seepage.
ADVANTAGES OF SMALL CABLE SHAFTS:
ÜAbility to switch cables from the cabinets to house foreign construction lockers without prejudice.
ÜThe possibility of transition, the distribution of terrestrial cable and HDPE pipes in relation to pet cupboard cabinets.
ÜThe shaft is extended at the bottom, enabling better restraint.
ÜThe shaft is bottomless, allowing easier introduction of HDPE pipes and cables.
ÜShafts cover is designes so that the valve, which serve to consolidate the manhole cover.
ADVANTAGES OF PKJ SHAFTÜHigh tensile hardness - flexibility.ÜDue to shafts low weight it is easy to
transport and build in.ÜSimple adding (installation) of new
pipes.ÜPossibility of a plastic tray-fitting two
sizes PP, which is mounted large cabinet.
ÜThe lid is plastic, into which is poured concrete.
ÜPossibility of installation of standard cast iron cover.
ÜOn the top of the shafts are notches, so that it can be cut according to the needs of the terrain.
ÜExtended bottom edge prevents the rise of the shaft from earth because of groundwater.
ÜAt each site can be drilled shaft hole in the plastic wall and install a rubber sealing ring for 50, 110, 125 and bigger pipes.
DN 580
200
285
215
920
950
DN 1000
DN 1100
DN 580
615
810 95
0
335
DN 800
DN 920
SHAFT MPKJ with lid
CABLE shaftsCABLE shaft PKJ 600 CABLE shaft PKJ 1000
CABLE shaft PKJ 800
7483 600x830Dimensions (wxh)Code
7326 800x950
OPTICAL COUPLING shaft SM1
SANDBOXES
7433 820x1250x540Dimensions (lxwxh) Code
7530 1000x950
7328 415x550x310Dimensions (lxwxh) Code
Dimensions (wxh)Code
500x15007443 625x1000
625x1500
6637 400x10006635 400x1500
500x1500
7442
APPEASEMENT shafts
ÜMATERIAL: Tanks are made of environmentally friendly polyethylene, which is suitable for clean water and faecal matter.
ÜUSE: It is intended to carry out an external water supply connection to individual houses and other small appliances.
ÜADVANTAGES:• Simple replacement and access to water meter.• Possibility of subsequent replacement lid.• The possibility of replacement of water meter without the shaft excavation.• Strong ribs prevent shaft deflection.• Shaft construction protects against frost in the coldest winter days.
WATER METER Termo shaft
WATER METER shaft 1000For one or more water meters
For one or two water meters
APPEASEMENT shafts 800, 1000
H
650
1000
25
0
WATER METER shafts
ADITIONAL EQUIPMENT to the shafts
5808 1000x1250Dimensions (wxh)Code
7431 600x1000
Dimensions (wxh)Code5854 500 x 1000
9132 Shaft cap hit for up to 600 kg load, 600
ProductCode
800x1000 4000 Dimensions (wxh)
1000x1000 4000
ProductCode5890 600 Cast iron lid for capacity 12,5 t (without ventilation, with the concrete crown)601 Cast iron lid for capacity 12,5 t (with holes for ventilation, with the concrete crown)603 Cast iron lid for capacity 25 t (without ventilation, with the concrete crown)604 Cast iron lid for capacity 40 t (without ventilation, with the concrete crown)605 Cast iron lid for capacity 40 t (with holes for ventilation, with the concrete crown)7334 Rubber sealing ring 50 for cable introduction7336 Rubber sealing ring 50 for pipe introduction7337 Rubber sealing ring 110 for pipe introduction7338 Rubber sealing ring 125 for pipe introduction7345 Circular saw for GTO 507346 Circular saw for GTO 1107347 Circular saw for GTO 1255900 Extension shaft H= 250, 5001280015 Stairs from PE1280016 Stairs galvanized
Plastic trunk lid 600, 800, 1000 (only walkable)
www.roto.bg | [email protected]