Upload
ninoslav-arsic
View
32
Download
0
Tags:
Embed Size (px)
DESCRIPTION
brondi roxy
Citation preview
Instruction manual- English
ROXY
What's in the box?
ROXY
base and
cordless
handset
1pc each Handset and Base
1pc AC power adaptor
1pc Telephone cord
2pcs rechargeable battery
1pc User Manual
You will also find:
Cordless
handset
Rechargeable
battery
Battery cover
AC adapter
If you purchased
model number:
You should
have:
ROXY None
ROXY-2 1 of each
ROXY-3 2 of each
GETTING STARTED
installing your phone
charge the battery
1.Remove a battery cover. Press in on the notch and slide the cover down.
2.Place the batteries in the correct polarity.3.Replace the battery cover and slide it up into place.
4.Use the base AC adapter to connect the power jack on the base to a standard AC
power outlet. If you have two or more handsets,
connect each charger in the same way.
5.Place a handset in the base with the display facing forward. For two or more handsets, place each handset in a charger.
Charge all handsets completely (about 15 hours) before using them.
Getting to know your phone
parts of the base
FIND
In standby: page all handsets
to find a lost one.Charging
cradle
UP
During a call: increase
the volume.
In any menu or list: move
to the previous item.
In standby: open the call log.
When entering text: move the
cursor to the left.
MENU/OK
In standby: open the menu.
In any menu or list: select
and confirm the selection.
TALK/RECALL
In standby: start a telephone
call
(get a dial tone).
While the phone is ringing:
answer an incoming call.
During a call: switch to a
waiting call.
*In standby: press and
hold for
about 3 sec. to lock/unlock
the keypad
REDIAL
In standby: open the
redial list.
MUTE
During a call: mute the
microphone on or off
CLEAR /ESC
In a menu: go back to the
previous screen.
When entering text: delete
one character.
(Press and hold to delete
all the characters.)
END
Press and hold to turn the
handset on or off.
During a call: hang up.
DOWN
During a call: decrease the
volume.
In any menu or list: move to
the next item.
In standby: open the
phonebook.
When entering text: move
the cursor to the right.
#In standby: press and hold
to turn the ringer on or off.
While entering a phone
number: press and hold to
insert a 3-second pause.
INTERCOM
In standby: page another
handset for a internal call.
During a call: page another
handset to transfer the call.
parts of the handset
Display icons and what they mean
OK
On: you have a strong signal from the base.
Blinking: the signal from the base is weak or not received.
The handset is on a call.
The alarm on this handset is activated.
The ringer is turned off.
On: you have records in the call log.
Blinking: you have missed calls.
The handset opens the phonebook.
You have a voice message waiting.
The battery is fully charged.
On: the battery is getting low.
Blinking: the battery is empty.
To select and confirm the selection, press MENU/OK.
To rotate through the items, Press UP or DOWN.
To go back to the previous screen, press CLEAR / ESC
To check more information, press CLEAR / ESC repeatedly.
Using extra handsets Your base supports a total of 5 handsets, including any that were supplied with your phone.
Handsets that came packaged with the base are already registered. Your phone is GAP compatible, which means you can register other DECT GAP compatible handsets to your base, and you can register your handset to other
DECT GAP compatible bases. (The GAP connection allows minimum functions.)
Your handset can only be used with one base at any time. To register or de-register the handset in this package, see page 7 .
To enter text on your phone
To... Press...
move the cursor left
move the cursor right
erase the character at the cursor
erase the entire entry
enter a blank space
rotate through the punctuation and symbols
UP.
DOWN.
CLEAR / ESC
and hold CLEAR / ESC
1.
0 or 1.
Basic setup
To use the menus
To... Press...
open the menu; with the phone in standby,
rotate through the menu options
select and confirm the option
go back to the previous screen
exit the menu
MENU/OK.
UP or DOWN.
MENU/OK.
CLEAR / ESC
END.
If you don't press any keys for 30 seconds, the handset exits the menu.
To set the clock
Note: Only one handset at a time can change the clock.
1.Open the menu. Select CLOCK & ALARM DATE/TIME.2.Enter the date and press MENU/OK.3.Enter the time. Change AM/PM using or # (if the time format is '12 hours'). To
*
confirm, press MENU/OK.
To set the date and time format: Open the menu. Select CLOCK & ALARM SET FORMAT TIME FORMAT or DATE FORMAT. If you subscribe to Caller Line Identification (CLI), the phone automatically sets the date and time from the received CLI information.
Open the menu. Select CLOCK & ALARM AUTO CLOCK ON.
To set the handset ringer and tonesOpen the menu. Select HS SETTINGS HANDSET TONE . . .
To set this handset's...
ringer volume
ringer tone for external calls
ringer tone for internal calls
tone when you press a key
tone when the handset is traveling out of range
tone when the battery gets too low
tone when you place the handset on a cradle
Select...
RING VOLUME
EXT/RING
INT/RING
KEY BEEP
RANGE TONE
BATTERY TONE
CHARGE TONE
To set other handset settingsOpen the menu. Select HS SETTINGS . . .
To...
set this handset's name used on the display
set this handset's display language
answer a call when you pick up this handset
from the cradle (without pressing any keys)
Select...
HANDSET NAME
LANGUAGE
AUTO ANSWER
To make and answer calls
To...
make a call (pre-dialing)
make a call (direct dialing)
answer a call
hang up
change the earpiece volume
mute the microphone on or off
Follow these steps:
Dial the number, and then press
TALK/RECALL.
Press TALK/RECALL and then dial the
number.
Press TALK/RECALL.
Press END.
Press UP or DOWN.
Press MUTE.
To switch the handset power on/off
To switch the handset off, press and hold End until the display turn off. To switch it on, press and hold END until the display turn on.
To Press...
open the list
scroll through the list
view the caller's
information (in call log)
dial the current number
save it to the phonebook
delete the current entry
close the lists
UP() for call log or REDIAL for redial list.
UP or DOWN.
MENU/OK, then select VIEW. To check more
information, press MENU/OK repeatedly.
TALK/RECALL.
MENU/OK, then select COPY TO PB.
MENU/OK, then select DELETE (DELETE ALL to
delete all entries). To confirm, press MENU/OK.
CLEAR / ESC
To use 'Call Waiting'
If you get a Call Waiting call, the phone sounds a tone.
To switch between the current and waiting call, press TALK/RECALL.
To use the phonebook
Each handset can store up to 20 entries in its phonebook.
To create a new phonebook entry
1.In standby, enter a phone number (up to 24 digits).2.Press MENU/OK. The phone prompts you to enter a name and edit the number, and select a special ringer tone for that entry.
To make a call from the phonebook
1.In standby, press DOWN( ). Use UP and DOWN to find a entry. (To check the entry's information, press MENU/OK repeatedly.)
2.Press TALK/RECALL to dial.To edit or delete phonebook entries
Open the menu. Select PHONEBOOK . . .
To use the alarm feature
You can set an alarm on each handset. You need to set the date and time before
using the alarm feature.
When the time on the handset reaches the time on the setting, the handset sounds for 1 minute. (Other handsets and the base don't ring.)
To stop the alarm tone, press any key on the handset. When an alarm is set, the alarm icon ( ) appears on the display.To set the alarm
Open the menu. Select CLOCK & ALARM ALARM ONCE, DAILY, or OFF.
To set the alarm tone
Open the menu. Select CLOCK & ALARM ALARM TONE.
If you want to change the base PIN (default 0000)
Open the menu. Select ADVANCED SET CHANGE PIN. Enter the current PIN
and press MENU/OK. Then enter the new PIN and press MENU/OK.
If you want to add a new handset
Register the handset. If you see 'UNREGISTERED' on the display, the handset is
ready to register.
1.On the base, press and hold FIND for about 5 seconds with the phone in standby.2.On the handset you want to register, open the menu. Select ADVANCED SET REGISTER.3.Enter the PIN (default 0000) and press MENU/OK.If you want to de-register the handset
1.Open the menu. Select ADVANCED SET UNREGISTER.2.Enter the PIN (default 0000) and press MENU/OK.3.Find the handset you want to de-register and press MENU/OK.If you want to connect the phone to a PBX
You may need to change the Recall Time setting.
Open the menu. Select ADVANCED SET RECALL TIME SHORT, MEDIUM,
or LONG.
If you want to reset your phone to the factory default settings
Open the menu. Select ADVANCED SET RESET. To confirm, press MENU/OK.
To Select...
edit an entryEDIT ENTRY. Use UP/DOWN to find an entry,
and press MENU/OK.
delete an entryDELETE. Use UP/DOWN to find an entry, and
press MENU/OK.
delete all entries DELETE ALL. To confirm, press MENU/OK.
To use multi-handset features
To use these features, you must have at least two handsets (see page 3).
To make an internal call
To page another handset To answer the page
1.Press TALK/RECALL.
2.When the transferring
handset hangs up, you
can talk to the outside
caller.
1.During a call, press INTERCOM. Press the number key of the handset. (To cancel, press
INTERCOM again.)
2.To complete the transfer, press END. To start a
conference call, wait the paged handset
answers, and press and hold INTERCOM.
To transfer a call
To page another handset To answer the page
In standby, press INTERCOM. If you have two
or more handsets, press the number key of the
handset. (To cancel, press INTERCOM again.)
Press TALK/RECALL.
To leave an internal call, press END.
-1- -2- -3-
-4- -5- -6- -7-
U01UF280ZAZ(0)
Instruction manual- francais
ROXY
OK
-1- -2- -3-
-4- -5- -6- -7-
Ce qui dans la bote?
ROXY
base et
combin
sans fil
1pc chaque Combin et Base
1pc adapteur d'alimentation CA
1pc Corde tlphonique
2pcs pile rechargeable
1pc Manuel d'Utilisation
Vous pouvez galement trouver:
Combin
sans fil
Pile rechargeable
Couvercle de pile
Adapteur CA
Si vous avez
achet le numro
de modle:
Vous avez:
ROXY
ROXY-2
ROXY-3
Aucun
1 chacun
2 chacun
Si tout lment est manqu ou endommag, n'utilisez jamais les produits abms!
Installer votre tlphone
Charger la pile
1.Enlevez le couvercle de pile. Enfoncez sur l'entaille et glissez le couvercle vers le bas.
2.Mettez les piles la polarit correcte.3.Remplacez le couvercle de pile et le glissez vers le haut en place.
4.Utilisez l'adapteur CA de base pour connecter la fiche d'alimentation sur la
base l'embase d'alimentation CA normale.
Si vous possdez deux ou plus de combins, connectez chaque chargeur de
mme faon.
5.Mettez un combin dans la base avec l'cran en avant. Pour deux ou plus de combins, mettez chaque combin dans un chargeur.
Chargez tous les combins compltement (15 heures environ)
avant d'utiliser.
Connatre votre tlphone
Parties de la base
TROUVER
En mode d'attente: paginer
tous les combins pour trouver
celui manqu.
berceau de charge
Parties du combinHAUT
Pendant un appel: augmenter
le volume.
Dans tout menu ou liste:
dplacer l'lment
prcdent.
En mode d'attente: ouvrir
la note d'appel.
En saisissant le texte:
dplacer le curseur vers
la gauche.
MENU/OK
En mode d'attente: Ouvrir
le menu.
Dans tout menu ou liste:
slectionner et confirmer
le choix.
PAROLE/RAPPELEREn mode d'attente: commencer un appel tlphonique (obtenir une tonalit de composition).Lorsque le tlphone sonne: rpondre un appel entrant.Pendant un appel: commuter un appel d'attente.
*En mode d'attente:
appuyez sur et maintenez
pendant 3 sec. environ pour
serrer/desserrer le pav.
RECOMPOSER
En mode d'attente: ouvrir
la liste de recomposition.
MUET
Pendant un appel:
activer ou dsactiver
le microphone muet.
EFFACER /ESC
Dans un menu: retourner
l'cran prcdent.
En saisissant le texte:
suppirmer une caractre.
(appuyez sur et maintenez
pour supprimer toutes les
caractres.)
TERMINER
appuyez sur et maintenez
pour mettre le combin en
marche ou arrt.
Pendant un appel:
raccrocher.
BAS
Pendant un appel: diminuer
le volume.
Dans tout menu ou liste:
dplacer l'lment suivant.
En mode d'attente:
ouvrir l'annuaire.
En saisissant le texte:
dplacer le curseur vers
la droite.
#En mode d'attente: appuyez
sur et maintenez pour mettre
la sonnerie en marche ou
arrt.
En saisissant le numro de
tlphone: appuyez sur et
maintenez pour insrer une
pause de 3 sec..
INTERCOM
En mode d'attente: paginer un autre combin
pour un appel interne.
Pendant un appel: paginer un autre combin
pour transfrer l'appel.
Icnes d'affichage et leurs indications
On: vous avez un signal fort partir de la base.
Clignotant: le signal partir de la base est faible ou n'est pas reu.
Le combin est occup.
L'alarme sur ce combin est activ.
La sonnerie est mise en arrt.
On: vous avez les enregistrements dans la note d'appel.
Clignotant: vous avez manqu les appels.
Le combin ouvre l'annuaire.
Vous avez un message vocal d'attente.
La pile est charge compltement.
On: la pile devient faible.
Clignotant: la pile est vide.
Pour slectionner et confirmer le choix, appuyez sur MENU/OK.
Pour tourner par les lments, appuyez sur HAUT ou BAS.
Pour retourner l'cran prcdent, appuyez sur EFFACER / ESC
faon rpte.
Pour vrifier plus d'information, appuyez sur EFFACER / ESC de
Utiliser extra combins Votre base supporte un total de 5 combins, y compris celui qui t fourni
avec votre tlphone.
Les combins tant emballs avec la base sont dj enregistrs.
Votre tlphone est GAP compatible, en indiquant que vous pouvez
enregistrer d'autres combins DECT GAP compatibles votre base, et vous
pouvez enregistrer votre combin d'autres bases DECT GAP compatibles
(La connexion GAP permet les fonctions minimales).
Votre combin ne peut tre utilis qu'avec une base en tout moment.
Pour enregistrer ou d-enregistrer le combin dans ce paquet, voyez page 7.
Pour saisir texte sur votre tlphone
Pour...
dplacer le curseur vers la gauche
dplacer le curseur vers la droite
effacer la caractre sur le curseur
effacer l'entre entire
saisir un espace blanc
tourner par la ponctuation et les symboles
Appuyez sur
HAUT.
BAS.
EFFACER / ESC
et maintenez EFFACER / ESC
1.
0 ou 1
Configurations principales
Pour utiliser les menus
Pour... Appuyez sur
ouvrir le menu; avec le tlphone en mode d'attente,
tourner par les options de menu
slectionner et confirmer l'option
retourner l'cran prcdent
quitter le menu
MENU/OK.
HAUT ou BAS.
MENU/OK.
EFFACER / ESC
TERMINER.
Si vous n'appuyez sur aucune touche pendant 30 secondes, le combin quitte le
menu.
Pour configurer l'horloge
Note: Seulement un combin en mme temps peut changer l'horloge.
1.Ouvrez le menu. Slectionnez HORLOGE & ALARME DATE/TEMPS.2.Saisissez la date et appuyez sur MENU/OK.3.Saisissez le temps. Changez AM/PM en utilisant ou # (si le format de temps est '12 heures'). Pour confirmer, appuyez sur MENU/OK.
Pour configurer le format de date et temps: Ouvrez le menu. Slectionnez HORLOGE & ALARME CONFIGURER FORMAT FORMAT DE TEMPS ou
FORMAT DE DATE.
Pour configurer la sonnerie de combin et les tonalits
Ouvrez le menu. Slectionnez CONFIGURATIONS HS TONALIT DE
COMBIN ...
Pour configurer les caractristiques ... de ce combin
volume de sonnerie
tonalit de sonnerie pour les appels externes
tonalit de sonnerie pour les appels internes
tonalit lorsque vous appuyez sur une touche
tonalit lorsque le combin se fonctionne hors de
la gamme
tonalit lorsque la pile devient trop faible
tonalit lorsque vous mettez le combin sur le berceau
Slectionnez...
VOLUME DE SONNERIE
EXT/SONNERIE
INT/SONNERIE
TONALIT DE TOUCHE
TONALIT DE GAMME
TONALIT DE PILE
TONALIT DE CHARGE
Pour configurer d'autres fonctions de combinOuvrez le menu. Slectionnez CONFIGURATIONS HS . . .
Pour... Slectionnez...
configurez le nom de ce combin utilis
sur l'cran
configurez la langue d'affichage de ce combin
rpondre un appel lorsque vous prenez ce
combin partir du berceau (sans appuyer
sur toute touche)
NOM DE COMBIN
LANGUE
AUTO RPONDRE
UTILISER VOTRE TLPHONE
Pour faire et rpondre aux appels
Pour... Suivez les tapes suivantes::
faire un appel (pr-composition)
faire un appel (composition
directe)
rpondre un appel
raccrocher
changer le volume d'couteur
activer et dsactiver le
microphone muet
Composez le numro, et puis appuyez
sur PAROLE/RAPPELER.
Appuyez sur PAROLE/RAPPELER
et puis composez le numro.
Appuyez sur PAROLE/RAPPELER.
Appuyez sur TERMINER.
Appuyez sur HAUT ou BAS.
Appuyez sur MUET.
Pour mettre le combin en marche/arrt Pour mettre le combin en arrt, appuyez sur et maintenez Terminer jusqu' ce que l'affichage est dsactiv.
Pour mettre le combin en marche, appuyez sur et maintenez TERMINER usqu' ce que l'affichage est activ.
Pour Appuyez sur
ouvrir la liste
faire dfiler la liste
parcouvir l'information
de correspondant
(dans la note d'appel)
composer le numro actuel
sauvegarder l'annuaire
supprimer l'entre actuelle
fermer les listes
HAUTE( ) pour la note d'appel ou
RECOMPOSER pour la liste de recomposition
HAUT ou BAS.
MENU/OK, puis slectionnez PARCOURIR.
Pour vrifier plus d'information, appuyez sur
MENU/OK de faon rpte.
PAROLE/RAPPELER.
MENU/OK, puis slectionnez COPIER AN.
MENU/OK, puis slectionnez SUPPRIMER
(TOUS SUPPRIMER pour supprimer toutes les
entres). Pour confirmer, appuyez sur MENU/OK
EFFACER / ESC
Pour utiliser 'Attente d'Appel'
Si vous recevez l'attente d'appel, le tlphone sonne une tonalit.
Pour commuter entre l'appel actuel et l'appel d'attente, appuyez sur
PAROLE/RAPPELER.
Pour utiliser l'annuaire
Chaque combin peut sauvegarder jusqu' 20 entres dans son annuaire.
Pour crer une nouvelle entre d'annuaire
1.En mode d'attente, saisissez un numro de tlphone (jusqu' 24 chiffres). 2.Appuyez sur MENU/OK. Le tlphone vous demande de saisir un nom et d'diter le numro, puis de slectionner une tonalit de sonnerie spciale pour
cette entre.
To faire un appel partir de l'annuaire
1.En mode d'attente, appuyez sur BAS( ). Utilisez HAUT et BAS pour trouver une entre.
(Pour vrifier l'information d'entre, appuyez sur MENU/OK de faon rpte.)
2.Appuyez sur PAROLE/RAPPELER pour composer.Pour diter ou supprimer les entres d'annuaire
Ouvrez le menu. Slectionnez ANNUAIRE ...
Pour
diter une entre
supprimer une entre
supprimer toutes les
entres
Slectionnez...
DITER ENTRE. Utilisez HAUT/BAS pour
trouver une entre, et appuyez sur MENU/OK.
SUPPRIMER. Utilisez HAUT/BAS pour trouver
une entre, et appuyez sur MENU/OK.
TOUS SUPPRIMER. Pour confirmer, appuyez sur
MENU/OK.
Pour utiliser les caractristiques de multi-combin
Pour utiliser ces caractristiques, vous devez possder au moins deux
combins (voir page 3).
Pour faire un appel interne
Pour paginer un autre combinPour rpondre
la page
1.Appuyez sur PAROLE/ RAPPELER.
2.Lorsque le combin
transfrant se raccroche,
vous pouvez parler au
correspondant externe.
1.Pendant un appel, appuyez sur INTERCOM. Appuyez sur la touche numrique du combin.
(Pour annuler, appuyez sur INTERCOM de nouveau.)
2.Pour terminer le transfert, appuyez sur TERMINER.
Pour commencer un appel de confrence, attendez les
rponses de combin pagines, puis appuyez sur et
maintenez INTERCOM.
Pour transfrer un appel
Pour paginer un autre combin Pour rpondre la page
En mode d'attente, appuyez sur INTERCOM. Si vous possdez deux ou plus de combins, appuyez sur la touche numrique du combin. (Pour annuler, appuyez sur INTERCOM de nouveau.)
Appuyez sur PAROLE/
RAPPELER.
Pour laisser un appel interne, appuyez sur TERMINER.
Pour utiliser les caractristiques d'alarme
Vous pouvez configurer une alarme sur chaque combin. Vous devez configurer la date
et le temps avant d'utiliser les caractristiques d'alarme.
Lorsque le temps sur le combin atteint le temps sur les configurations, le combin sonne pendant 1 minute. (D'autres combins et la base ne sonnent pas.)
Pour arrter la tonalit d'alarme, appuyez sur toute touche sur le combin. Aprs avoir configur une alarme, l'icne d'alarme ( ) montre sur l'cran.Pour configurer l'alarme
Ouvrez le menu. Slectionnez HORLOGE & ALARME ALARME UNE FOIS,
QUOTIDIEN, ou OFF.
Pour configurer la tonalit d'alarme
Ouvrez le menu. Slectionnez HORLOGE & ALARME TONALIT D'ALARME.
Si vous voulez changer le PIN de base (par dfaut 0000)
Ouvrez le menu. Slectionnez CONFIGURATION AVANCE CHANGER PIN.
Saisissez le PIN actuel et appuyez sur MENU/OK. Puis saisissez le nouveau PIN et
appuyez sur MENU/OK.
Si vous voulez ajouter un nouveau combin
Register the handset. If you see 'NON INSCRIT' sur l'cran, le combin est prt
enregistrer.
1.Sur la base, appuyez sur et maintenez TROUVER pendant 5 secondes environ avec le tlphone en mode d'attente.
2.Sur le combin que vous voulez enregistrer, ouvrez le menu. Slectionnez CONFIGURATION AVANCE ENREGISTRER.
3.Saisissez le PIN (par dfaut 0000) et appuyez sur MENU/OK.Si vous voulez d-enregistrer le combin
1.Ouvrez le menu. Slectionnez CONFIGURATION AVANCE DENREGISTRER.2.Saisissez le PIN (par dfaut 0000) et appuyez sur MENU/OK.3.Trouvez le combin que vous voulez d-enregistrer et appuyez sur MENU/OK.Si vous voulez connecter le tlphone un PBX
Vous devez changer les configurations de Temps de Rappel.
Ouvrez le menu. Slectionnez CONFIGURATION AVANCE TEMPS DE RAPPEL
COURT, MDIUM, ou LONG.
Si vous voulez remettre votre tlphone aux configurations d'usine par dfaut
Ouvrez le menu. Slectionnez CONFIGURATION AVANCE RECONFIGURER. Pour
confirmer, appuyez sur MENU/OK.
1 2