RPM AC Inverter Duty Stock Motor Mod Expressaseci.com.mx/PDF/CA_401_RPMAC_Mod_Exp.pdfRPM AC Inverter Duty Stock Motor Mod Express® Pricing Standard Baldor•Reliance motors are manufactured

RPM AC Inverter Duty Stock Motor

Mod Express®

CA401Effective Date:January 2, 2011

RPM AC Inverter Duty Stock Motor Mod Express®

Modification Section for RPM AC MotorsRPM AC Frames FL180 through L440

How to Price an Order1. Find the basic list price of the required stock RPM AC motor.

2. Add list prices of the Modifications from this section to the basic motor list price.

3. Apply appropriate multiplier for discount symbol E-2 to total list price.

4. Enter Order.Note: Customers will absorb all freight costsNote: Modification prices do not include the cost of the motor. Some modifications may require more than (1) Modification Number to complete the Mod.

How and Where to Enter an OrderBaldor•Reliance customers can send their orders to the local Baldor•Reliance District Office. To order, specify the catalog number of the stock product and the mod number.

NoticeNo charge orders will not be accepted or processed. This includes warranty replacement orders. The correct method is to charge for the replacement order and issue credit for the original order.

Delivery CycleThe delivery cycle will be subject to the availability of the stock motors and parts. Some modifications only take a couple of days, others may take 1-2 weeks. For rush orders, check that the basic motor is in stock and then call the local district office customer service to get a quotation on the time required for your particular modifications. Lead times of 1-2 weeks are subject to availability of stock motors in the Fort Smith warehouse. Mods done at the Gainesville motor plant will have transportation time from the Fort Smith warehouse and will require an additional delivery time.

MOD Express Cancellation PolicyShould it be necessary to cancel an order for a motor after it is modified, but before it ships – a cancellation charge of double the modification charge will be invoiced to the customer. Any MOD order cancelled before the modification is completed is subject to a 25% cancellation charge. Once the motor is shipped, modified motors can be returned to stock at purchaser's expense and will be invoiced at double the MOD price plus a 10% restock fee.


M1 Adapter Bases or Rails .............................1 Slide Base Adapter RailsM2 Air Pressure Switch ..................................1M3 Balance, Dynamic .....................................1M4 Bearings, Insulated ..................................2M5 Belted Drive ..............................................3M6 Brakes - Drive End ....................................3M7 Conduit Box Modifications .......................3 One Size Larger than Std Cast Iron Mill Type Auxiliary Mounting F-1 or F-2M8 Covers (DPFV) ..........................................4 Vertical Mount SplashproofM9 Drain Plugs ...............................................4 Automatic Breather Drain Standard “T” DrainM10 Enclosure Modification .............................4 Separately Ventilated TEAO-Piggyback XT Features Paper Mill DutyM11 End Brackets ............................................5 C-Face Bracket D-Flange Bracket

M12 Feedback Devices ................................ 6-8M13 Encoder Mounting ....................................9M13.1 Encoder Mounting Special .......................9M13.2 Provisions for Mounting ............................9M14 Filter Kits ...................................................9M15 Insulation Tropical ...................................10M16 Lubrication ..............................................10 Fittings Automatic Grease Relief FittingsM17 Nameplates .............................................10M18 Packaging ...............................................10M19 Paint, Special ..........................................10M20 Service Factor .........................................11M21 Shaft Modifications .................................11 Slinger Lip SealM22 Space Heaters ........................................11 Space Heater Aux. Conduit BoxM23 Terminal Blocks ......................................12 Main Terminal Block Accessory Terminal BlockM24 Tests .......................................................12 Routine Test Complete Test

Mod No. Modification Page Mod No. Modification Page


BasesList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Rails-Adapter $503 $994 $1171 $1427 $1776 $2466 $2,957 $3,871

Rails are not suitable for wall or ceiling mounting.

SwitchesList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440

Standard Enclosure All Frames $925

Weatherproof Enclosure All Frames $1359

Monitors pressure differential between inside and outside of motor to actuate SPDT switch when pressure drops below preset value giving an immediate indication that the air supply to the motor is reduced. Applicable to forced ventilated motors with either motor mounted blower or separately forced ventilated by customer supplied air. Since motors dependent on force ventilation will have a rapid rise in temperature after the air supply is interrupted, the customer must take immediate corrective action when the switch trips. Contacts rated 15 amps, 120-480 volts, 60 Hz AC resistive; 1/8 HP at 125 volts; 1/4 HP at 250 volts, 60Hz AC. Applicable to frames FL180 thru L440. Note: Mounted on motor bracket at air inlet end.

M3 Balance, Dynamic Electric Motor Balance And Vibration Preface

1

M1 Adapter Rails Or Slide Base

M2 Air Pressure Switch

Balance can be defined as the state of the mass distribution within the rotating assembly about its axis of rotation. The eccentricities of this mass distribution are referred to as unbalance. The amount of unbalance is stated in units of mass times a distance, such as gram-inches, gram-centimeters or gram-millimeters. Vibration is defined as the motion of a body in response to forces imposed upon that body. Vibration in assembled motors can be measured as amplitude in inches, peak to peak, or as velocity in inches per second or as velocity in millimeters per second.

Displacement, inches, Peak to Peak = 19.10 x Velocity, Inches per Second, Peak ÷ RPMDisplacement, Inches, Peak to Peak = 1.062 x Velocity, Millimeters per Second RMS ÷ RPMDisplacement, Inches, Peak to Peak = 0.752 x Velocity, Millimeters per Second, Peak ÷ RPMVelocity, in/sec peak = Displacement, inches peak x 2 p x f ÷ 60 or Displacement, in p-p x p x f ÷ 60RMS = Peak to Peak x 0.707Peak = Peak to Peak x 0.50 (f = rpm) In addition to unbalance, there are other sources of motor vibration such as even air gap, frame distortion due to improper torquing of foot mounting bolts, operation at or near critical speed and various bearing, support, coupling and electromagnetic effect problems. Unbalance is the predominant component in vibration when displacement is measured. The many other, higher frequency components show up when measuring velocity.


PricingStandard Baldor•Reliance motors are manufactured in accordance with the vibration limits stated in NEMA MG1, Part 7. Per NEMA, bearing housing vibration is stated as “the peak value of the unfiltered vibration velocity in inches per second”. Table I shows bearing housing vibration velocity in inches per second as well as other units for comparison. Shaft vibration measurements are recommended for sleeve bearing machines only. Contact Baldor•Reliance when you have sleeve bearing requirements.

Table I - Standard Machine Vibration Limits

Speed rpm(NEMA Standard)

Unfiltered Vibration Velocity in/sec peak

(IEC Terminology)Unfiltered Vibration

Velocity mm/sec rms1801-3600 0.15 2.7

1201-1800 0.15 2.7

901-1200 0.15 2.7

721-900 0.12 2.1

601-720 0.09 1.6

Less than 600 0.08 1.4

Table II - Special Machine Vibration Limits

Unfiltered Vibration Velocity (in/sec) peak

Speed rpm Standard Precision0 - 1200 0.15 0.04

1201 - 1800 0.15 0.04

1801 - 3600 0.15 0.06

3601 - 5000 0.2 0.06

5001 - 8000 (1) 0.2 0.08

Use the following pricing chart for Machine Vibration Limits

Vibration Category

List Price by Frame SizeFL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440

Standard per Table I

N/C N/C N/C N/C N/C N/C N/C N/C

Precision $674 $674 $674 $1,257 $2,535 $3,631 $3,631 $3,945

To change the opposite drive end ball bearing to an insulated bearing, please make the following list price addition. These are for horizontal mounting only. If both bearings are to be insulated, use two times the list price in the table. Insulated bearings are not available for roller bearings.

List Price by Frame SizeFL180 FL/RL210 FL/RL250 L/FL/RL280 L320 L360 L400 L440*$1,325 $1,325 $1,550 $2,353 $2,597 $2,597 $2,638 $2,733

Note: All L440 and FL440 frames include an insulated opposite drive end bearing as standard.

2

M4 Bearing – Insulated


Drive TypeList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440

Belted Drive (1) (1) (1) $1215 $1414 (2) (2) (2)

Motor Mounted Brake - Drive End (1) Nominal Brake (ft.-lbs) Standard Enclosure Dust-Tight, Waterproof Enclosure

10 $3847 $4692

15 $3939 $4596

25 $4019 $4689

35 $4154 $4831

50 $4338 $5109

75 $5697 $6521

105 $6096 $6968

M5 Belted Drive Provides for roller bearings and special shaft on frames UL280-UL320 used for belted drive.

M6 Brakes Table I - Drive End -The Stearns double C-Face 87,700 series brake can be mounted on the drive end of all

C-Face stock enclosures. Motor mounting positions, i.e. horizontal or vertical, must be specified on the order. Note: Drive end mounted brakes are not suitable for belted duty. Manual release - standard on all Stearns brakes.

M7 Conduit Box

(1) Standard oversized ball bearing is normally suitable for belted or coupled duty. See RADIAL LOAD CAPACITY in application section.

(2) Order as custom motor.

(1) For coupled duty only.

Conduit Box FeatureList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440One Size Larger C/B - (Not applicable

on L400 - L440 frames)$320 $320 $320 $320 $400 $475 N/A N/A

Cast Iron C/B - (Not applicable to L400 - L440 frames)

$320 $320 $320 $497 $710 $857 N/A N/A

Mill Type C/B (1) - (RL210 - L360), standard on all L400 & L440 frames

$708 $708 $708 $994 $1,416 $1,702 Std Std

Auxiliary C/B N/A $327 $327 $594 $594 $594 $697 $697

F-1 or F-2 Mounting(2) $411 $548 $548 $571 $571 $599 $662 $662

(1) Heavy gauge, large rectangular metal box. Standard on L400 and L440 frames.(2) All stock totally enclosed RPM AC have top mounted conduct box. All DPFV motors are F-1 as standard. Note: For FL180 - FL/RL 250 Frames, Stock Kits available for conversion to F-1 or F-2 mounting on all TEFC & TEBC, and for F-2 mounting on DPFV.

3


TypeList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Vertical Mount Louvers (1) $143 $217 $217 $331 $571 $571 $799 $799

Splashproof Covers (2) $240 $503 $640 $640 $640 $640 $959 $959


FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Automatic Breather Drain* All Frames $178

Standard “T” Drain* All Frames $42Note: Drain Plugs are at the lowest point of the motor.

Encl. Mod.List Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Separately Ventilated N/A -$265 -$834 -$1,257 -$1,576 -$1,816 -$1,976 -$2369

TEAO Piggyback $503 $503 $708 $948 $1,267 $1,496 $2,021 $2,318

CP/XT Features N/A $743 $994 $1,234 $1,655 $2,569 $3,231 $3,231 Note: List price deduct

(1) Special bracket louvers designed to insure drip-proof protection for vertically operated foot or flange mounted motors.

(2) For dripproof machines to meet NEMA MG1 - 1.25.2 requirements for splashproof enclosures. Provides protection against liquid drops or solid particles from entering the motor at any angle not greater than 100 degrees downward from the vertical.

• Separately Ventilated - For applications where ventilated air is piped into the machine from an external source, basic DPG-FV enclosures may be separately ventilated at 3, 9 and 12 o’clock for the above list price deductions, (FL180 ventilated at 12 o’clock only, exit atmosphere). The inlet pipe can be fastened to one end bracket, and, if required and specified, an outlet pipe can be fastened to the other end bracket. Price does not include blower or pipe. Locations of air entry and air exhaust, if used, should be specified on order. Motors must not be operated without the separate air supply. Contact Baldor•Reliance for separate ventilating air requirements. (To insure adequate protection of a separately ventilated motor against loss of cooling air, an overtemperature device for interlocking with the controller overload protection circuit is recommended and should be added as standard practice. An air pressure differential switch is also recommended.) See pricing deduction chart below.Note: On stock motors, air entry must be opposite drive end of motor for proper thermostat protection of windings

• TEAO-Piggyback - For totally enclosed machines where blower motor must be on top or side of base motor housing, use the following pricing chart to add to TEAO inline price for top- or side-mounted blower and shroud for direct cooling air over base motor frame. Includes 3-phase 60 Hz 230/460 Volt AC Induction Motor.

• XT-Features (IP54) - (RL210 thru L440 frames) The Baldor•Reliance CP/XT Severe Duty motor is designed for operation in damp locations where the motor will be subjected to corrosive conditions. Typical applications are paper, chemical, petroleum, fertilizer and plastics industries. XT motors are provided in totally enclosed non-ventilated, totally enclosed fan-cooled and totally enclosed air-over construction. TEAO-BC will use an XT blower motor with longer blower housing than TEAO-BC standard.

4

M8 Covers (DPFV)

M9 Drain Plugs

M10 Enclosure Modification


CP/XT Motor Construction Includes the Following Features: • Conduit box has pipe tab lead outlet. Neoprene gaskets on cover and box frame. Box construction is -

Epoxy coated cast iron. (Mill type on L400 designs above 510 amps and all L440 frames). • Shaft (in-board of bearing caps) painted with epoxy enamel. • Stainless steel or neoprene slinger mounted on external shaft extensions. • External fan on TEFC motors is plastic or epoxy coated cast iron • Fan cover on TEFC motors is finished with epoxy enamel. • Assembled motor with mounted accessories painted with epoxy enamel. • Conduit box has pipe tab lead outlet. Neoprene gaskets on cover and box frame. Box construction is -

Epoxy coated cast iron. (Mill type on L400 designs above 510 amps and all L440 frames).• Bracket to frame rabbet fit sealed with special sealing compound. • All hardware corrosion resistant.

Motor accessories such as brakes must be specified and priced as totally enclosed construction for CP/XT motors.

Motors located in damp, moist environments must have space heaters to protect against condensation when the motor is not operating. Motors operating in dirty areas with fine abrasive dust such as taconite surrounding the motor should have Dustproof/taconite features added in addition to this modification.

M11 End Brackets All totally enclosed RPM AC 5–30HP are stocked with a C-Face per 501 catalog as noted. NEMA

C-Face or D-Flange bracket with standard dimensions and feet. Special Seals required when oil will be around the shaft. C-Face available on frames FL180C thru L360C only. D-Flange only available on DPFV RL210 - L440 frames.

Note: Since RPM AC motors are designed for maximum horsepower per frame size, it is important to state the specific NEMA C-Face or D-Flange and shaft diameter required for mounting, when motor will be mounted to a reducer.


FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440C-FACE $485 $508 $508 $608 $76 $1225 N/A N/A

D-FLANGE N/A $943 $1,204 $1,377 $2,188 $2,785 $3,622 $3,622

Important: Motor C-Face is intended for mounting auxiliary equipment such as pumps, gears, etc. When mounted horizontally, frames L280C thru L360C & L400D thru L440D must be supported by the feet and not by the C-Face or D-Flange alone. Note: Prices above cover only a bracket change with no shaft changes. To supply smaller than standard diameter and/or length, add the following: (FL/RL210 - L280 $490 LIST); (L320 - L440 $970 LIST)

5


CatalogNumber

MotorEnclosure

Type1024 PPR

FrameSize MFG Mag or

OpticalConnType

VoltageVDC

List PriceDiscount E8

417077-136 TENV HS35 FL180-FL/RL280 BEI O MS-ST 5-15 $1,400 417077-208TL TENV HS35 FL180-FL280 BEI O MS-TL 5-28 $1,400 417708-361 TENV HSD35 FL180-FL/RL280 Dynapar O Latch 5-26 $1,575 417077-153 TENV H20 FL180-FL/RL280 Dynapar O MS-ST 5-15 $1,551 417077-156 TENV RL67 FL180-FL/RL280 Dynapar M Latch 5-16 $2,000 417708-226 TENV SL85 FL180-FL/RL280 Dynapar M Latch 5-17 $2,126 417077-170 TENV RAHS35M FL180-FL/RL280 Avtron M MS-ST 5-24 $1,400 417077-133 TEFC HS35 FL180-FL/RL280 BEI O MS-ST 5-15 $1,400

417077-209TL TEFC HS35 FL180-FL280 BEI O MS-TL 5-28 $1,400 417708-371 TEFC HSD35 FL180-FL/RL280 Dynapar O Latch 5-26 $1,575 417077-180 TEFC RAHS35M FL180-FL/RL280 Avtron M MS-ST 5-24 $1,400 417077-165 TEBC HS35 FL180 BEI O MS-ST 5-15 $1,400

417077-210TL TEBC HS35 FL180 BEI O MS-TL 5-28 $1,400 417077-188 TEBC HS35 FL210 BEI O MS-ST 5-15 $1,400



417077-213TL TEBC HS35 FL280 BEI O MS-TL 5-28 $1,400 417708-131 TEBC HS35 L280 BEI O MS-ST 5-15 $1,400 417708-140 TEBC HS35 L320 BEI O MS-ST 5-15 $1,400

417077-214TL TEBC HS35 L320 BEI O MS-TL 5-28 $1,400 417077-215TL TEBC HS35 L360 BEI O MS-TL 5-28 $1,400 417708-142 TEBC HS35 L400 BEI O MS-ST 5-15 $1,400

417077-216TL TEBC HS35 L400 BEI O MS-TL 5-28 $1,400 417077-173 TEBC RAHS35M FL180 Avtron M MS-ST 5-24 $1,400 417077-182 TEBC RAHS35M FL210 Avtron M MS-ST 5-24 $1,400 417077-183 TEBC RAHS35M FL250 Avtron M MS-ST 5-24 $1,400 417077-205 TEBC RAHS35M FL280 Avtron M MS-ST 5-24 $1,400 417077-176 TEBC RAHS35M L280 Avtron M MS-ST 5-24 $1,400 417077-177 TEBC RAHS35M L320 Avtron M MS-ST 5-24 $1,400 417077-178 TEBC RAHS35M L360 Avtron M MS-ST 5-24 $1,400 417077-179 TEBC RAHS35M L400 Avtron M MS-ST 5-24 $1,400 417077-167 TEBC H20 FL180 Dynapar O MS-ST 5-15 $1,551 417077-190 TEBC H20 FL210 Dynapar O MS-ST 5-15 $1,551 417077-191 TEBC H20 FL250 Dynapar O MS-ST 5-15 $1,551 417077-203 TEBC H20 FL280 Dynapar O MS-ST 5-15 $1,551 417708-90 TEBC H20 L280 Dynapar O MS-ST 5-15 $1,551 417708-91 TEBC H20 L320 Dynapar O MS-ST 5-15 $1,551 417077-168 TEBC RL67 FL180 Dynapar M Latch 5-15 $2,000

6

M12 Feedback Devices Stock Encoder Kits (Price Includes Encoder plus all Mounting Hardware and Mating Connector) See encoder mounting on page 9 for assembly price.


CatalogNumber

MotorEnclosure

Type1024 PPR Frame Size MFG Mag or

OpticalConn Type

VoltageVDC

List PriceDiscount E8

417077-192 TEBC RL67 FL210 Dynapar M Latch 5-15 $2,000 417077-193 TEBC RL67 FL250 Dynapar M Latch 5-15 $2,000 417077-206 TEBC RL67 FL280 Dynapar M Latch 5-15 $2,000 417077-136 DPFV HS35 FL180-RL280 BEI O MS-ST 5-15 $1,400

417077-208TL DPFV HS35 FL180-RL280 BEI O MS-TL 5-28 $1,400 417708-130 DPFV HS35 L280-L400 BEI O MS-ST 5-15 $1,400

417077-218TL DPFV HS35 L320-L400 BEI O MS-TL 5-28 $1,400 417077-170 DPFV RAHS35M FL180-RL280 Avtron M MS-ST 5-24 $1,400 417077-171 DPFV RAHS35M L280-L400 Avtron M MS-ST 5-24 $1,400 417077-172 DPFV RAHS35M L440 Avtron M MS-ST 5-24 $1,400 417708-361 DPFV HSD35 FL180-RL280 Dynapar O MS-ST 5-26 $1,575 417708-362 DPFV HSD35 L280-L400 Dynapar O MS-ST 5-26 $1,575 417077-153 DPFV H20 FL180-RL280 Dynapar O MS-ST 5-15 $1,551 417708-85 DPFV H20 L280-L400 Dynapar O MS-ST 5-15 $1,551 417077-156 DPFV RL67 FL180-RL280 Dynapar M Latch 5-15 $2,000 417708-87 DPFV RL67 L280-L400 Dynapar M Latch 5-15 $2,000

417708-120 DPFV RL67 L440 Dynapar M Latch 5-15 $2,000 417708-226 DPFV SL85 FL180-RL280 Dynapar M Latch 5-15 $2,126

7

M12 Feedback Devices (cont.) Stock Encoder Kits (Price Includes Encoder plus all Mounting Hardware and Mating Connector) See encoder mounting on page 9 for assembly price.


Encoder Type PPR VDC Output List Price

Dynapar HS-35 Up to 2048 5-26vSingle Output $2,429 Dual Output $3,734

Northstar/Lakeshore HS-56 Up to 2048 5-15vSingle Output $5,972 Dual Output $11,651

Avtron M685 SMARTach™ Up to 2048 5-18vSingle Output $9,988 Dual Output $14,533

BEI HS-25 500 - 1024 5-24v Single Output $2,220 BEI H-25 500 - 1024 5-24v Single Output $4,046

Allen Bradley 845H 1024/2048 5-15v Single Output $6,752

Avtron M3 240 - 2500 5 - 18v or 5-24vSingle Output $3,749 Dual Output $5,455

Avtron M4 240 - 2500 5 - 18v or 5-24vSingle Output $4,942 Dual Output $7,072

Dynapar H56 1024 / 2048 5-26vSingle Output $5,109 Dual Output $6,897

Avtron M485 240 - 1200 12-15vSingle Output $8,688 Dual Output $12,404

Avtron M56 1024/2048 5-24v Single Output $2,597 Avtron M67 1024/2048 5-24v Single Output $2,717

Avtron M85 128 -2048 12 - 15vSingle Output $2,964 Dual Output $5,739

Avtron AV850 SMARTach II 240 - 1200 12 - 15vSingle Output $6,878 Dual Output $10,362

Lakeshore RIM8500

240 or 600

5-15v

Single Output $6,888 240 or 600 Dual Output $8,909

1024 or1200 Single Output $6,888 1024 or1200 Dual Output $8,909

Lakeshore RIM1250 1024/2048 5-15vSingle Output $9,684 Dual Output $11,793

Avtron AV125 1024/2048 5-24vSingle Output $13,692 Dual Output $17,052

8

M12 Feedback Devices (cont.) Stock Encoder Kits (Price Includes Encoder plus all Mounting Hardware and Mating Connector) See encoder mounting on page 9 for assembly price.


M13 Encoder Mounting

M14 Filter Kits

M13.1 Encoder Mounting Special

M13.2 Encoder/Resolver Mounting Provisions Only

Mounting of Stock Encoder Kits


Mounting of Encoder Kits to RPM AC Motors

$315 $315 $343 $343 $343 $343 $457 $629

See stock kits above or in the 501 catalog

FiltersList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440CatalogNumber

417077-57

417077-59

417077-59

417077-59

417077-59

417077-65

417077-102

417077-124

Kit Price $580 $580 $580 $580 $580 $727 $1,070 $1,588 *Installed Price $913 $913 $913 $913 $913 $1,120 $1,507 $2,112

*417077-124 is a Square Replaceable Polyester Type

Mounting of Customer Supplied 56 C-Face or other Encoder


Mounting of Customer Supplied 56 C-Face or other Encoder

All Frames $3,044

Includes mounting and all mounting hardware.Note: May require TEAO-Piggyback blower on TEAO -in-line blowercooled designs. Contact Baldor•Reliance for assistance.

PROVISION - APPLICABLE TO TENV, DPFV, DPSV, and TEAO-PIGGYBACK ENCLOSURES. Requires specific brand and part number of feed back device with order entry. List Price

Machined motor bracket and counter bore of opposite drive end shaft only. Standard On FL180-L440 frames STD.

Machined motor bracket and stub shaft with protective cover over stub shaft. $710

Machined motor bracket, cast iron adapter, and stub shaft for mounting of any feedback device with 56 C-Face or other encoder.

$1,696

Machined motor bracket, cast iron adapter, stub shaft and coupling for mounting of any feedback device with 56 C-Face or other encoder.

$1,973

PROVISION - APPLICABLE TO TEFC ENCLOSURES. Requires specific brand and part number of feedback device with order entry. List Price

Counter bore of opposite drive end shaft. STD.

Adapter, stub shaft and coupling - for future mounting of any feedback device with 56 C-Face. $1,973

9


M15 Insulation

M16 Lubrication

M17 Nameplate

Insulation System Mod.List Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Tropical Protection Add 5% of Basic Motor List Price by Frame Size – Minimum $300 Net

Grease FittingsList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Automatic Grease Relief Fittings -

2 FittingsAdd $47 List Price - all frames

Nameplate ChangeList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Rerate of Stock Motors Add $161 List Price - all frames

Separate Nameplate for Customer Data Add $161 List Price - all frames

M18 PackagingPackaging

ModificationList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Export Boxing $1,085 $1,085 $1,085 $1,313 $1,371 $1,371 $3,310 $3,310

10

• Standard RPMAC motors utilize an advanced insulation system that provides excellent protection against fungus and high humidity as found in tropical climates. The standard motor is suitable for operation in tropical climates without additional treatment. For additional protection, especially during shipment and prolonged storage, this modification provides a fungicidal air dry varnish treatment per MIL-V-173C (Type I Treatment) applied over all motor windings.

Note: Motors applied in highly corrosive, moist and dirt-laden environments should have an enclosure with XT Dirty / Duty features to limit the entrance of contaminants into the motor.

• The 180-250 frame RPMAC motors come standard with a “Permanently lubricated bearing system (Lubricated for the bearing life). Larger frames 280 - 440 comes with the PLS bearing system which has regressing provisions with alemite fittings as standard.

• For ocean freight shipment. Does not include broker fees, customs, documentation, etc.

• Special color or type of paint. Supply Federal Standard, RAL number or paint chip with order. Special color or type of paint must be compatible with our standard air dry primer.

M19 Paint

Paint ModificationList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Special Paint-Factory

Supplied $343 $343 $343 $343 $343 $571 $799 $1,171


M20 Service Factor Standard listed motors are for 1.0 service factor. For greater than standard service factor, use the price

of the listed machine with the same enclosure and speed with a horsepower rating equal to the rated HP times the required service factor. If the HP thus calculated is not standard, use the next higher standard rating. See nameplate for rerate.

Note: Oversizing the inverter may increase the size of the Variable Frequency Controller.

• This modification provides a lip seal on the drive end to protect the bearing when operated with oil splashing against the shaft. Typical application is on a horizontal motor mounted to a gear case where the stationary oil level is below the motor shaft. List price is per bearing.

Caution: Seals operated dry for extended periods will be damaged.

• Mounted inside the motor. Recommended to prevent condensation of moisture for motors remaining unenergized for long periods of time. Standard heater is single phase 120, 240, or 480 volts, 50/60 Hz. Leads are terminated in motor conduit box unless modification for Separate Auxilary Conduit Box for Space Heater Leads is specified.

M21 Shaft Modifications & Seals

Shaft ModificationList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Shaft Modifications See Modified Variable Speed Catalog

Shaft Seal Modification


Slinger- V-Ring $27 $37 $54 $63 $75 $89 $118 $129This Forsheda® rotating seal protects the bearing from oil splash and dust contamination.

Lip Seal $600 $714 $714 $714 $714 $1,485 $1,485 $1,485

M22 Space Heaters

ModificationList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Space Heaters $419 $419 $419 $644 $644 $644 $1,204 $1,204

Auxiliary Conduit Box $545 $545 $545 $545 $545 $545 $639 $639

11


M24 Tests As standard practice, every RPM AC motor is full load check tested on a dynamometer with a PWM

power supply, and receives a Routine Test per IEEE 112 modified for inverter power supply.

TestsList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Routine Test with Report (1) All Frames $100

Routine Test Witnessed $629 $629 $838 $1,047 $1,257 $1,466 $1,675 $1,885

Complete Test (2) $2,618 $2,618 $3,350 $3,350 $4,920 $5,392 $6,093 $7,464

Complete Test (2) Witnessed

$7,330 $7,330 $8,461 $8,461 $8,461 $8,461 $8,461 $11,984

(1) Certified Routine Test Report per IEEE 112 modified for inverter power(2) Complete test provides complete performance test and heat run on PWM inverter power per IEEE

112 modified for operation on an inverter.

12

M23 Terminal BlocksTerminal Board in Main

Conduit BoxList Price by Frame Size

FL180 FL / RL210 FL / RL250 FL / RL280 L320 L360 L400 L440Main Terminal Board (1) $445 $445 $559 $725 $959 $1,188 $1,564 $1,564

Accessory Terminal Block (2) $161 $161 $161 $161 $161 $161 $161 $161

(1) Provides terminal block in conduit box for connection of RPMAC motor power leads, instead of the standard leads with terminal lugs. Thermostat leads will not be connected to the terminal block.

(2) Provides terminal block in auxiliary conduit box for connection of pulse tachometer or digital encoder. Requires auxiliary conduit box - see conduit box tab.

BAlDoR ElECtRIC CoMPANyWorld Headquarters • P.O. Box 2400 • Fort Smith, AR 72902-2400 U.S.A.

Ph: (479) 646-4711 • Fax (479) 648-5792 • International Fax (479) 648-5895 • www.baldor.com© Baldor Electric CompanyCA401

All Rights Reserved. Printed in USA.1/11

JAPAN DIA BLDG 802, 2-21-1 TSURUYA-CHO, KANAGAWA-KU YOKOHAMA, 221-0835, JAPAN PHONE: 81-45-412-4506 FAX: 81-45-412-4507

MEXICo lEoN, guANAJuAto KM. 2.0 BLVD. AEROPUERTO LEÓN 37545, GUANAJUATO, MÉXICO PHONE: +52 477 761 2030 FAX: +52 477 761 2010 MIDDlE EASt & NoRtH AFRICA VSE INTERNATIONAL CORP. P. O. BOX 5618 BUFFALO GROVE, IL 60089-5618 PHONE: 847 590 5547 FAX: 847 590 5587

PANAMA AVE. RICARDO J. ALFARO EDIFICIO SUN TOWERS MALL PISO 2, LOCAL 55 CIUDAD DE PANAMá, PANAMá PHONE: +507 236-5155 FAX: +507 236-0591

SINgAPoRE 18 KAKI BUKIT ROAD 3, #03-09 ENTREPRENEUR BUSINESS CENTRE SINGAPORE 415978 PHONE: (65) 6744 2572 FAX: (65) 6747 1708

SWItZERlAND POSTFACH 73 SCHUTZENSTRASSE 59 CH-8245 FEUERTHALEN SWITZERLAND PHONE: +41 52 647 4700 FAX: +41 52 659 2394

tAIWAN 1F, NO 126 WENSHAN 3RD STREET, NANTUN DISTRICT, TAICHUNG CITY 408 TAIWAN R.O.C PHONE: (886) 4 238 04235 FAX: (886) 4 238 04463

uNItED KINgDoM 6 BRISTOL DISTRIBUTION PARK HAWKLEY DRIVE BRISTOL BS32 0BF U.K. PHONE: +44 1454 850000 FAX: +44 1454 859001

VENEZuElA AV. ROMA. QTA EL MILAGRO. URB. CALIFORNIA NORTE CARACAS, 1070 VENEzUELA PHONE/FAX: +58 212 272 7343 MOBILE: +58 414 114 8623

NEW yoRK AuBuRN ONE ELLIS DRIVE AUBURN, NY 13021 PHONE: 315-255-3403 FAX: 315-253-9923

NoRtH CARolINA gREENSBoRo 1220 ROTHERWOOD ROAD GREENSBORO, NC 27406 PHONE: 336-272-6104 FAX: 336-273-6628

oHIo CINCINNAtI 2929 CRESCENTVILLE ROAD WEST CHESTER, OH 45069 PHONE: 513-771-2600 FAX: 513-772-2219

ClEVElAND 8929 FREEWAY DRIVE MACEDONIA, OH 44056 PHONE: 330-468-4777 FAX: 330-468-4778

oKlAHoMA tulSA 7170 S. BRADEN, SUITE 140 TULSA, OK 74136 PHONE: 918-366-9320 FAX: 918-366-9338

oREgoN PoRtlAND 20393 SW AVERY COURT TUALATIN, OR 97062 PHONE: 503-691-9010 FAX: 503-691-9012

PENNSylVANIA PHIlADElPHIA 1035 THOMAS BUSCH MEMORIAL HIGHWAY PENNSAUKEN, NJ 08110 PHONE: 856-661-1442 FAX: 856-663-6363 PIttSBuRgH 159 PROMINENCE DRIVE NEW KENSINGTON, PA 15068 PHONE: 724-889-0092 FAX: 724-889-0094

tENNESSEE MEMPHIS 4000 WINCHESTER ROAD MEMPHIS, TN 38118 PHONE: 901-365-2020 FAX: 901-365-3914

INDIANA INDIANAPolIS 5525 W. MINNESOTA STREET INDIANAPOLIS, IN 46241 PHONE: 317-246-5100 FAX: 317-246-5110

IoWA DES MoINES 1800 DIXON STREET, SUITE C DES MOINES, IA 50316 PHONE: 515-263-6929 FAX: 515-263-6515

MARylAND BAltIMoRE 6660 SANTA BARBARA RD. SUITES 22-24 ELKRIDGE, MD 21075 PHONE: 410-579-2135 FAX: 410-579-2677

MASSACHuSEttS BoStoN 6 PULLMAN STREET WORCESTER, MA 01606 PHONE: 508-854-0708 FAX: 508-854-0291

MICHIgAN DEtRoIt 5993 PROGRESS DRIVE STERLING HEIGHTS, MI 48312 PHONE: 586-978-9800 FAX: 586-978-9969

MINNESotA MINNEAPolIS 21080 134TH AVENUE NORTH ROGERS, MN 55374 PHONE: 763-428-3633 FAX: 763-428-4551

MISSouRI St louIS 422 INDUSTRIAL DRIVE MARYLAND HEIGHTS, MO 63043 PHONE: 314-298-1800 FAX: 314-298-7660

KANSAS CIty 1501 BEDFORD AVENUE NORTH KANSAS CITY, MO 64116 PHONE: 816-587-0272 FAX: 816-587-3735

tEXAS DAllAS 2920 114TH STREET SUITE 100 GRAND PRAIRIE, TX 75050 PHONE: 214-634-7271 FAX: 214-634-8874

HouStoN 10355 W. LITTLE YORK ROAD SUITE 300 HOUSTON, TX 77041 PHONE: 281-977-6500 FAX: 281-977-6510

utAH SAlt lAKE CIty 2230 SOUTH MAIN STREET SALT LAKE CITY, UT 84115 PHONE: 801-832-0127 FAX: 801-832-8911

WISCoNSIN MIlWAuKEE 1960 SOUTH CALHOUN ROAD NEW BERLIN, WI 53151 PHONE: 262-784-5940 FAX: 262-784-1215

INtERNAtIoNAl SAlES FoRt SMItH, AR P.O. BOX 2400 FORT SMITH, AR 72902 PHONE: 479-646-4711 FAX: 479-648-5895 CANADA EDMoNtoN, AlBERtA 4053-92 STREET EDMONTON, ALBERTA T6E 6R8 PHONE: 780-434-4900 FAX: 780-438-2600

toRoNto oAKVIllE, oNtARIo 2750 COVENTRY ROAD OAKVILLE, ONTARIO L6H 6R1 PHONE: 905-829-3301 FAX: 905-829-3302

MoNtREAl, QuEBEC 5155 J-ARMAND BOMBARDIER SAINT-HUBERT, QUÉBEC CANADA J3Z 1G4 PHONE: 514-933-2711 FAX: 514-933-8639

VANCouVER, BRItISH ColuMBIA 1538 KEBET WAY PORT COQUITLAM, BRITISH COLUMBIA V3C 5M5 PHONE 604-421-2822 FAX: 604-421-3113

WINNIPEg, MANItoBA 54 PRINCESS STREET WINNIPEG, MANITOBA R3B 1K2 PHONE: 204-942-5205 FAX: 204-956-4251

AuStRAlIA UNIT 3, 6 STANTON ROAD SEVEN HILLS, NSW 2147, AUSTRALIA PHONE: (61) (2) 9674 5455 FAX: (61) (2) 9674 2495

UNIT 8, 5 KELLETTS ROAD ROWVILLE, VICTORIA, 3178 AUSTRALIA PHONE: (61) (3) 9753 4355 FAX: (61) (3) 9753 4366

El SAlVADoR RESIDENCIAL PINARES DE SUIZA POL. 15 #44, NVA. SAN SALVADOR, EL SALVADOR PHONE: +503 2288-1519 FAX: +503 2288-1518

CHIlE LUIS THAYER OJEDA 166, OF 402 - PROVIDENCIA SANTIAGO, CHILE PHONE: +56 2 816 9900

CHINA 160 SONG SHENG ROAD SONGJIANG INDUSTRY ZONE SHANGHAI 201613, CHINA PHONE: +86 21 5760 5335 FAX : +86 21 5760 5336

gERMANy HERMANN-HEINRICH-GOSSEN-STRASSE 3 50858 KOLN, GERMANY PHONE: +49 2234 379 410 FAX: +49 2234 379 4164

DIESELSTRASSE 22 D-85551 KIRCHHEIM MUNICH, GERMANY PHONE: +49 89 90 5080 FAX: +49 89 90 50 8492

INDIA 14, COMMERCE AVENUE MAHAGANESH COLONY PAUD ROAD PUNE - 411038 MAHARASHTRA, INDIA PHONE: +91 20 25 45 27 17 / 18 FAX: +91 20 25 45 27 19

INDoNESIA TALAVERA OFFICE PARK, 28TH FLOOR, SUITE M18 JI. T.B. SIMATUPANG, KAV. 22-26 JAKARTA 12430, INDONESIA PHONE: +62 21 7599 9879 FAX: + 62 21 7599 9878

ItAly VIA SOTTOBISIO 30 BALERNA CH-6828 PHONE: +41 91 683 6161 FAX: +41 91 630 2633

uNItED StAtES

ARIZoNA PHoENIX 4211 S 43RD PLACE PHOENIX, AZ 85040 PHONE: 602-470-0407 FAX: 602-470-0464

ARKANSAS ClARKSVIllE 1001 COLLEGE AVENUE CLARKSVILLE, AR 72830 PHONE: 479-754-9108 FAX: 479-754-9205

CAlIFoRNIA loS ANgElES 6480 FLOTILLA STREET COMMERCE, CA 90040 PHONE: 323-724-6771 FAX: 323-721-5859

HAyWARD 21056 FORBES AVENUE HAYWARD, CA 94545 PHONE: 510-785-9900 FAX: 510-785-9910

ColoRADo DENVER 3855 FOREST STREET DENVER, CO 80207 PHONE: 303-623-0127 FAX: 303-595-3772

CoNNECtICut WAllINgFoRD 65 SOUTH TURNPIKE ROAD WALLINGFORD, CT 06492 PHONE: 203-269-1354 FAX: 203-269-5485

FloRIDA tAMPA/PuERto RICo/ VIRgIN ISlANDS 3906 EAST 11TH AVENUE TAMPA, FL 33605 PHONE: 813-248-5078 FAX: 813-247-2984

gEoRgIA AtlANtA 62 TECHNOLOGY DRIVE ALPHARETTA, GA 30005 PHONE: 770-772-7000 FAX: 770-772-7200

IllINoIS CHICAgo 340 REMINGTON BLVD. BOLINGBROOK, IL 60440 PHONE: 630-296-1400 FAX: 630-226-9420

•EDMoNtoNVANCouVER

• DIStRICt oFFICE & WAREHouSES

PoRtlAND

HAyWARD

loS ANgElES

PHoENIX

MoNtERREy

guADAlAJARA

tAMPA

FoRtSMItH

✫ MEMPHIS

WINNIPEg

AtlANtA

KANSAS CIty

St louIS

DENVER

DES MoINES

gREENSBoRo

BAltIMoRE

PIttSBuRgH

CINCINNAtI

INDIANAPolIS

DAllAS

CHICAgo

PHIlADElPHIANEW yoRK

BoStoNAuBuRN

ClEVElAND

DEtRoIt

toRoNtoMINNEAPolIS MIlWAuKEE

SAlt lAKE CIty

tulSA

• MoNtREAl

HouStoN

lEoN

WAllINgFoRD

•

•

•

• •

•

•

•• •• •

• ••••••

•

•• •

•

••

•

•

• •

•

•

•••

ClARKSVIllE••

MEXICo CIty

•

BAlDoR SAlES oFFICES

Documents

RPM AC Inverter Duty Stock Motor Mod Expressaseci.com.mx/PDF/CA_401_RPMAC_Mod_Exp.pdfRPM AC Inverter Duty Stock Motor Mod Express® Pricing Standard Baldor•Reliance motors are manufactured