22.25 hrs

2 pcs

f

0.25 mm

k

0.40 mm

h

81

197.00 g

d

MK3/S

Summary

This is an entirely 3D printed rubber band gun. It has no screws or glueand uses a 3D printed spring. The sides are held together with a tightpress fit.

It shoots a standard size rubberband (the cheapest full size available fromWalmart). Putting some wax on the moving components will help themmove smoother, but is not required.

Toys & Games > Other Toys & Games

toy rubberband

All components will fit on an MK3 build plate. Both PLA and PETG areknown to work, but other plastics may also work. PETG may requiresupports due to some overhangs.

Seth

Rubber Band Gun(No hardwarerequired!)

VIEW IN BROWSER

updated 20. 3. 2020 | published 19. 3. 2020

Print Files (.gcode) DOWNLOAD ALL FILES

13.8 MB

11.13 hrs f 0.25 mm k 0.40 mm h PET 98.60 g d MK3/S

updated 19. 3. 2020

13.5 MB

11.12 hrs f 0.25 mm k 0.40 mm h PLA 98.80 g d MK3/S

updated 19. 3. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

19.3 KBupdated 19. 3. 2020

15.5 KBupdated 19. 3. 2020

274.0 KBupdated 19. 3. 2020

392.1 KBupdated 19. 3. 2020

559.4 KBupdated 19. 3. 2020

694.0 KBupdated 19. 3. 2020

everything_025mm_petg_mk3_11h8m.gcode

everything_025mm_pla_mk3_11h7m.gcode

spring-v2.stl

connector_extender-3-v45.stl

trigger_trigger-v20.stl

extender_extender-3-v45.stl

catch_catch-2-v12.stl

upper-frame_.stl

643.5 KBupdated 19. 3. 2020

607.5 KBupdated 19. 3. 2020

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-ShareAlike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

lower-frame_lower-frame.stl

everything.3mf