Upload
ana-maria-ciuperca
View
248
Download
0
Embed Size (px)
Citation preview
7/24/2019 Rwa Method
1/25
Chapter 5
Determination of Rw
Lecture notes for PET 370
Spring 2012
Prepared by: Thomas W. Engler,
Ph.D., P.E.
7/24/2019 Rwa Method
2/25
Determination of Rw
1. Archies Equation
a. if water zone is present.
b. Rwa Approach
c. Resistivity - Porosity Crossplots
2. Laboratorya. Direct measurement of representative
water sample.
b. Chemical analysis of water sample.
3. Databasesa. Published regional water catalogs
b. online:http://octane.nmt.edu/waterquality
4. SP log
5. Guess?
Name Five Methods to determine Rw.
k
SSP
mfeR
weR 10*
7/24/2019 Rwa Method
3/25
Determination of Rw
Preliminary Concepts
Total conductivity is influenced by:
porosity
water saturation
salinity
salt composition
temperature
shale content
metallic minerals; e.g., pyrite
Water
conductivity
metXshXF
nwSwC
tC
Which directly related to water conductivity?
7/24/2019 Rwa Method
4/25
Determination of Rw
Preliminary Concepts
Temperature Effects
ionic conductivity - as temp. increases the
conductivity increases. True or False?
TrueSalinity Effects
As salinity increases the conductivity will
increase. True or False?
Solution ppm NaCl resistivity,-moil or gas - 1.0 E6
Potable water 500 10.0Fresh mud filtrate < 5,000 1.0 - 5.0
Sea water 35,000 0.2Salt mud filtrate 75,000 0.1Saturated salt water 250,000 0.04
7/24/2019 Rwa Method
5/25
Determination of Rw
How to determine formation temperature?
The formation of interest is at 6500 ft. What is the formationtemperature?
Tf= 112 F
What is the geothermal gradient, (gG), in {deg.F/100 ft}?
gG= 0.80 F/100 ft
Lea County ,NM
7/24/2019 Rwa Method
6/25
Determination of Rw
How to determine formation temperature?
Near surface temperature, (To), is given regionally by:
Gulf Coast 80 deg. F
Oklahoma 60
California 60
Permian Basin 60
Rocky Mtns. 50Alberta 35
7/24/2019 Rwa Method
7/25
Determination of Rw
Location To, CAnkara, Turkey 6.7Aswan, Egypt 26.7
Aberdeen, Scotland 8.9
Bogota, Columbia 14.3
Bombay, India 27.1
Calgary, Alberta 5.4
Caracas, Venezuela 20.5
Changha, China 18.0
Gabon, Africa 26.0
Great Yarmouth, England 8.9
Location To, CJakarta, Indonesia 26.7Lima, Peru 20.0Mendoza, Argentina 16.0
Natal, Brazil 23.0
Perth, Australia 18.0
Prince George, B.C. 3.6
Rio De Janeiro, Brazil 23.0Santa Cruz, Bolivia 15.0
Siberia (west), Russia -4.0
Trinidad, W.I. 29.7
How to determine formation temperature?
7/24/2019 Rwa Method
8/25
Determination of RwHow to determine resistivity at Tf?
Courtesy of Schlumberger
Given a Resistivity = 0.1 ohmm at 75F what is
The resistivity at 125 ?
7/24/2019 Rwa Method
9/25
7/24/2019 Rwa Method
10/25
Determination of Rw
1. Archies Equation
a. if water zone is present.
b. Rwa Approach
c. Resistivity - Porosity Crossplots
2. Laboratorya. Direct measurement of representative
water sample.
b. Chemical analysis of water sample.
3. Databasesa. Published regional water catalogs
b. online:http://octane.nmt.edu/waterquality
4. SP log
5. Guess?
Methods
F
oR
wR
k
SSP
mfeR
weR 10*
7/24/2019 Rwa Method
11/25
Determination of Rw
How to determine resistivity if a chemical
composition is available?
When drilling in evaporite and carbonate formations, the
following type of problem can occur. A recovered water
sample is classified as 200,000 ppm of saturated brine;
i.e., only NaCl ions are present. At a formation
temperature of 275F what is the Rw?
Rw= 0.013 ohmm
Using this Rw in log evaluations indicated the presence
of oil; however, numerous production tests produced
only water!
7/24/2019 Rwa Method
12/25
Determination of Rw
How to determine resistivity if a chemical
composition is available?
Consider the effect of Mg++and Ca++ions, which are common
in carbonates, on the computed values of Rw. Assuming a
concentration of 50,000 ppm of Mg++ and Ca++ ions and
100,000 ppm of Na Cl what is the Rw?
Rw= 0.024 ohmm
What is the increase in water saturation due to this variation in
Rw?
Ion Concentration Multiplier Equiv NaCl
conc.Na+ and Cl- 100,000
Ca++ 50,000
Mg++ 50,000
Total 200,000
Ion Concentration Multiplier Equiv NaCl
conc.
Na+ and Cl- 100,000 1.00 100,000
Ca++ 50,000 0.35 17,500Mg++ 50,000 -0.50 -25,000
Total 200,000 92,500
If n=2 in the Archie saturation equation, then
2/1
1
2*12
wR
wR
wS
wS
Therefore for this example Sw2= 1.36*Sw1or a 36% increase in water saturation.
7/24/2019 Rwa Method
13/25
Determination of Rw
How to determine resistivity if a chemical
composition is available?
Empirical Ion Multiplier ChartSchlumberger
7/24/2019 Rwa Method
14/25
Determination of Rw
1. Archies Equation
a. if water zone is present.
b. Rwa Approach
c. Resistivity - Porosity Crossplots
2. Laboratorya. Direct measurement of representative
water sample.
b. Chemical analysis of water sample.
3. Databasesa. Published regional water catalogs
b. online:http://octane.nmt.edu/waterquality
4. SP log
5. Guess?
Methods
F
oR
wR
k
SSP
mfeR
weR 10*
7/24/2019 Rwa Method
15/25
Determination of Rw
waRwR
wS
:bysaturationwaterDetermine
)minimum(waRwR:findzones,ofseriesaforCalculate
FtR=waR
thusincrease;Rt willbut the
sametheisiprelationshFthezone,HCainIf
F
)
o
Ror(
t
R
wR
then100%),=(SwzonewaterainIf
FtR
2wS
wR
:EquationsArchie'Rearrange
Rwa Technique
Requirements:
1. Rw is constant
2. Lithology is constant
3. A water zone exists and is identifiable
Procedure:
7/24/2019 Rwa Method
16/25
7/24/2019 Rwa Method
17/25
Determination of Rw
Rwa Technique Example
= 32.8%
= 26.4%
= 28%
= 30.3%A
B
C
D
E
Ct = 2000
Ct = 3000
Ct = 3800
Ct = 2400
Zone F Ct,millimhos/m
Rt, ohm-m Rwa,ohm-m Sw, %
A 30.3 8.82 2000 0.50 0.057 65
B 30.3 8.82 2000 0.50 0.057 65
C 26.4 11.62 3000 0.33 0.028 92D 28.0 10.33 3800 0.25 0.024 100
E 32.8 7.53 2400 0.42 0.056 65
7/24/2019 Rwa Method
18/25
Determination of Rw
1. Archies Equation
a. if water zone is present.
b. Rwa Approach
c. Resistivity - Porosity Crossplots
2. Laboratorya. Direct measurement of representative
water sample.
b. Chemical analysis of water sample.
3. Databasesa. Published regional water catalogs
b. online:http://octane.nmt.edu/waterquality
4. SP log
5. Guess?
Methods
F
oR
wR
k
SSP
mfeR
weR 10*
7/24/2019 Rwa Method
19/25
Determination of Rw
ResistivityPorosity Crossplots
Pickett Plot
Rearrange Archies Equation:
wSlogn)
waRlog(logm
tRlog
7/24/2019 Rwa Method
20/25
Determination of Rw
ResistivityPorosity Crossplots
Pickett Plot Example
Pickett Plot
y = 0.3007x-0.5267
R2= 0.7674
0.01
0.10
1.00
0.10 1.00 10.00 100.00
Rt,ohm-m
Porosit
aRw=0.10
Rw=0.12
m=1/.5267=1.90
Sw=50%
Results:
m = 1.90
Rw = 0.12 ohm-m
7/24/2019 Rwa Method
21/25
Determination of Rw
ResistivityPorosity Crossplots
Hingle Plot
m/1
waR
n
wSm/1
]t
R[
Rearrange Archies Equation
7/24/2019 Rwa Method
22/25
Determination of Rw
ResistivityPorosity Crossplots
Hingle Plot Example
Hingle Plot, m=1.90
y = 3.4858x
R2= 0.9836
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.00 0.05 0.10 0.15 0.20
Porosity
Rt-1/
Sw = 50%
At = 10% y = 0.35 Ro = 7.4 ohmmF = 64
Rw = 0.115 ohmm
OOIP = 118 Mstb
7/24/2019 Rwa Method
23/25
Determination of Rw
7/24/2019 Rwa Method
24/25
Determination of Rw
Bassiouni, Z: Theory, Measurement, and Interpretation ofWell Logs, SPE Textbook Series, Vol. 4, (1994)
Chapter 4, Sec 4.5-4.6
Chapter 12, Sec 12.2
Chapter 13
Schlumberger, Log Interpretation Chartbook, (1995)
References
7/24/2019 Rwa Method
25/25
Determination of Rw
How to determine formation temperature?
During logging operations record the maximum temperature(TTD) at the bottom of the well (DTD).
Assume a linear geothermal gradient, (gG), {deg.F/100 ft}
Region of Diurnal andAnnual Variations
ToTa
TEMPERATURE
DEPTH
100
gG
{F/100}
Tf, Df
TfD
)T(TT