Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
P R O D U C T S F O R A
G R O W I N G W O R L D
O F T E C H N O L O G Y
S E L F - S U P P O R T I N G T O W E R S
The ROHN SSV Series of Self -Supporting Towers provide an excellent strength to cost ratio proven by
years of use. In production over 20 years, the SSV has evolved into a highly efficient and wide ranging
system of custom towers produced from pre-engineered sections.
T I M E T E S T E D S T R E N G T H A N D D E S I G N
W O R L D W I D E M U L T I P L E U S E S
S E L F - S U P P O R T I N G T O W E R S
SSV towers are in use Worldwide for two way communications,
microwave, cellular, PCS, public safety, broadcast, STL, surveillance
camera mounts, solar power stations, weather stations and even high
level lighting of sports stadiums.
U N M A T C H E D
A T T E N T I O N
T O D E T A I L
Backed by one of the largest manufacturers of
communications towers in the world, ROHN Self-
Supporting Towers are produced with unmatched
attention to detail. As with all ROHN products,
SSV Towers are Hot Dip Galvanized after fabrica-
tion to assure years of corrosion free use. In this
process each section of the tower is totally
immersed in molten zinc, allowing every square
inch of the tower, inside and out, to be com-
pletely covered. Hot Dip Galvanizing protects all
points of welding and construction against rust
and corrosion while providing an attractive finish.
SSV Structures are available with a wide variety
of pre-designed accessories including platforms,
antenna mounts, ladders, lighting accessories,
mounts, ice shields and safety climbing devices.
Most SSV sections use angle steel cross bracing,
with lighter upper sections using a Zig-Zag® brace
pattern. SSV sections can be combined with “K”
braced SSMW tower sections for added height
and strength when needed.
S S V T O W E R -F E A T U R E S :
• Time tested design
• Tubular or solid steel leg design
• For applications to 300 feet
• Custom designs from pre-engineered sections
• Available with a free 20 year warranty
• All parts Hot Dip Galvanized after fabrication
Standard SSV Towers are available for applications
not requiring site specific engineering analysis see
section for details.
Form No. 98-2858
6718 West Plank Road • Peoria, Illinois 61604 USAPhone: 309 - 697 - 4400 • FAX: 309 - 697 - 5612 Website: http://www.rohnnet.com • E-mail: [email protected]