SET & SIT- the personalized

Energy Free Comfort system

Traditionally you choose once where you sit down … and since you cannot set what you have decided to sit on.

Different designs, but none of them is adjustable –once a choice is made, the deformation depends

on the weight of the person

Needs and expectations

Personalized comfortable seats within the same piece of furniture

The idea

• Cushions are hermetically sealed. Their springinesses highly depend on the air pressure inside.

• The load is shared between the foam and the air.

• As we are able to set the volume of the air inside, we can easily personalize the level of its hardness.

• Using the „spring effect” of the foam we can get back the original form and hardness of the cushion without any effort when there is no more load on it.

The solution

• The cushion is hermetized by a special coated textile.

• It works as a dynamic system: its shape and hardness respond quickly on the load change.

• Its dynamic behavior based on the simple two-valve system:– To set the comfort level a manual pressure relief valve is used to

control the air volume inside– To feed up the unloaded cushion an automatic check valve is used

• Remote control is also possible – considering built-in cushions.

The design of the cushion

Loaded cushion – comfort control

Unloaded – automatic check valve and also the spring effect of the foam

Its benefits

Cost effeciency

No real competition! Standard

foamTraditional

spring-seatsPremium

foamsAir seats EFC set&sit

Adjustable NoNo, but might

be progressive

No, but might be

progressiveYes Yes

Lifetime Low Mid Mid Long Long

Energy Not needed Not needed Not needed Needed Not needed

Design/Assembly SimpleMid

complicatedMid

complicatedComplicated Simple

Cost Low Mid High High High

Market segment Low end Low end Mid end High end High end

The investment in the comfort

• Our best estimate is that at the production volume of 10000pcs p.a. the investment needed is ca. 30% higher than any of the known traditional designs.

• But buy a growing production volume the a.m. difference on the investment is dropping down.

• Also the easiness of the production & assembling process compensates this extra investment.

• For the total costs of the production this is very close to a zero-cost balance model

Intellectual property - patents

• Cushion system – P 09 00179

• Valve system – P 09 00501

• Both are under international priority (PCT) process

• The idea has won the international innovational award for youth in product development and product innovation category in Prague, 2009.

Possible applications

• Seat furnitures with free cushions – manual set

• Seat furnitures with fixed cushions – remote set

• Sanitary use

• Bed matresses

• Commercial vehicle cabins, sleeping wagons, caravans

• … and many more.

Summary

…. so , why wouldn’t you set&sit today?

Thank you for your attention!